Matt McWilliams
06906eca42
Start progress on rack and pinion nub mover
2023-09-27 19:10:13 -04:00
Matt McWilliams
b1c8192625
Projector firmware progress: currently the homing function will not compile due to errors with reference and so the sketch method needs to be broken into workable smaller methods
2023-09-25 21:54:31 -04:00
Matt McWilliams
d2c7781d79
Servo notch puller progress
2023-09-25 21:53:10 -04:00
Matt McWilliams
37d4f50ef4
Add OpenSCAD/MCAD to the project to prevent double work. Including as a submodule appears to satisfy the requirement of the LGPL and allows mcopy to remain MIT licensed.
2023-09-25 12:25:56 -04:00
Matt McWilliams
082ac85c5c
Add deeper notches for 90 degree points
2023-09-25 12:14:59 -04:00
Matt McWilliams
cfca56ba48
Migrate stepper block into its own module
2023-09-24 22:58:14 -04:00
Matt McWilliams
c7cb4ddbc5
Create the first design of the orbital mount and make slight adjustment to panel (screws were not attaching fully).
2023-09-24 22:46:38 -04:00
Matt McWilliams
7f98d6028b
Commit all work in progress
2023-09-21 21:06:31 -04:00
Matt McWilliams
401822a7bb
Merge branch 'main' of ssh://git.sixteenmillimeter.com/16mm/mcopy
2023-09-15 19:18:09 -04:00
Matt McWilliams
173ba06590
Work on projector (wrong)
2023-09-14 23:30:29 -04:00
Matt McWilliams
8e90456d87
LED gate should be larger
2023-09-12 21:53:38 -04:00
Matt McWilliams
0b880a5e79
Add accurateRead functions and Readme
2023-09-06 15:41:36 -04:00
Matt McWilliams
082dbc0826
Add void for motor, threaded rod (optional) and linear rod.
2023-09-06 00:01:00 -04:00
Matt McWilliams
5eccbbf6df
Remove part of the 2020 ends so that it can print without supports
2023-09-05 23:29:48 -04:00
Matt McWilliams
513deb7a0a
Render part of the projector.
2023-09-05 23:15:53 -04:00
Matt McWilliams
2b24dc647c
Update lens assembly to start using a 2020 frame
2023-09-05 23:15:32 -04:00
Matt McWilliams
f8e5968f30
Rename JK lens assembly to reflect it is a new design
2023-09-05 21:31:31 -04:00
Matt McWilliams
18b8c84fff
Add additional bearings to lens sled and voids for m5 bolts to hold in side bearings.
2023-09-04 13:10:23 -04:00
Matt McWilliams
1d6ccb7838
Enlarge void for m5 bolt. Add void for m5 nut.
2023-09-04 11:43:01 -04:00
Matt McWilliams
a7a63a3be7
Render all projector and rails in current state
2023-09-04 10:49:20 -04:00
Matt McWilliams
153ef9eceb
Use fast-csg and parallel with 8 jobs hardcoded
2023-09-04 10:48:54 -04:00
Matt McWilliams
03f2b55762
Fucked up the merge
2023-08-29 23:33:42 -04:00
Matt McWilliams
6714374639
restore work from tonight
2023-08-29 23:11:24 -04:00
Matt McWilliams
b6b1f5d5ba
Parts work
2023-08-29 22:34:55 -04:00
Matt McWilliams
b30c637c10
Add structures to insert 2020 Tslot into to make rails fit more snug
2023-08-23 23:35:00 -04:00
Matt McWilliams
f16795b11c
Render the mcopy rails parts in current form
2023-08-23 22:27:06 -04:00
Matt McWilliams
86c88c4ac2
Printing a prototype for the lens sled
2023-08-23 00:14:47 -04:00
Matt McWilliams
dd4834de04
Render rails parts (still WIP)
2023-08-21 19:39:08 -04:00
Matt McWilliams
2d90c127a3
Render existing projector panel parts
2023-08-21 19:38:55 -04:00
Matt McWilliams
51d440fccc
Render all working CPC connector parts
2023-08-21 19:38:16 -04:00
Matt McWilliams
2e3ed56bb3
Update part names of bellows.scad. Render missing magnetic board.
2023-08-21 19:34:21 -04:00
Matt McWilliams
4be57f3128
Update part names for CPC connectors
2023-08-21 19:31:20 -04:00
Matt McWilliams
de6f0d0495
Compile all parts in project, optionally using GNU parallel if available.
2023-08-21 19:04:39 -04:00
Matt McWilliams
010927c5ca
Rename rails_2020 to mcopy_rails
2023-08-20 23:55:27 -04:00
Matt McWilliams
3346bf01af
Work on rails having a bearing
2023-08-20 23:54:21 -04:00
Matt McWilliams
788cac7d50
All work towards creating a sled rail for the lens carriage assembly
2023-08-20 18:35:48 -04:00
Matt McWilliams
a8a33a823a
Update to 1.8.0 to reflect new breaking changes in app
2023-08-06 15:22:38 -04:00
Matt McWilliams
e7e7f86ab3
Manual merge from capper branch: all changes to devices library.
2023-08-06 15:04:33 -04:00
Matt McWilliams
386285d48c
Definition file that prevents compiler warnings on some platforms. Still unexplained because tsc is installed local to the project.
2023-08-06 14:58:26 -04:00
Matt McWilliams
c4119ab7cc
Manual merge from capper branch: all changes to arduino library with some improvements.
2023-08-06 14:56:42 -04:00
Matt McWilliams
176643f148
Manual merge from capper branch: all changes to display library.
2023-08-06 14:36:31 -04:00
Matt McWilliams
8b235bb6b0
mitchell work
2023-08-05 14:42:03 -04:00
Matt McWilliams
2f56dd4b8a
Update the timing after delaying for 5000ms (hack)
2023-07-30 23:03:06 -04:00
Matt McWilliams
699c2dbec8
UI cleanup 1: confirm setting the exposure
2023-07-30 22:26:05 -04:00
Matt McWilliams
dac720863d
Resolves #80 and #81 . UI will need a little cleanup. There is some string concatenation happening where it shouldn't.
2023-07-30 22:13:50 -04:00
Matt McWilliams
a173cf0d7c
WIP
2023-07-23 20:00:42 -04:00
Matt McWilliams
fb51716e3a
All work
2023-07-14 21:13:04 -04:00
Matt McWilliams
bdd74fa90a
Save css changes
2023-07-14 21:12:48 -04:00
Matt McWilliams
8631250b9e
Ignore all apple hidden files
2023-07-13 13:00:10 -04:00
Matt McWilliams
0cc167b3a6
Incredibly close to #80 and #81 . Can get state confirmation at startup. Can send exposure string and get confirmation after. Cannot get state outside of initial confirmation. Something is either locked or failing to wait?
2023-07-10 22:33:16 -04:00
Matt McWilliams
4539c6d897
Methods in place for setting exposure
2023-07-05 15:17:45 -04:00
Matt McWilliams
58ce079330
Both components are working properly.
2023-07-04 22:46:37 -04:00
6d379d284b
on site work at MONO
2023-07-01 16:34:07 -04:00
Matt McWilliams
c0d6cbccec
Can now detect if state is available on a device
2023-06-17 17:57:30 -04:00
Matt McWilliams
71e4bea384
Preliminary state support in arduino library. Currently confirms the negative state. Might want to push it until after verify, out of enumerate.
2023-06-16 23:04:16 -04:00
Matt McWilliams
83aa3099c4
Update the settings page with time for projector and camera actions
2023-06-16 22:07:53 -04:00
Matt McWilliams
672db32917
Put in place changes needed to receive a string from an arduino
2023-06-12 22:45:25 -04:00
Matt McWilliams
174b900cd8
Update commands
2023-03-18 17:00:13 -04:00
Matt McWilliams
142c990a0e
Refactored GUI into TypeScript and class-based format
2023-03-18 16:59:26 -04:00
Matt McWilliams
70ab8cb527
Improve timing. Sequence takes into account serialDelay within each command and sequenceDelay has no bearing. Was adding 120ms of error to every step
2023-03-01 13:37:22 -05:00
Matt McWilliams
512f6c86ad
Resolves #73 . Delay is exported in .ts file so it is non-ambient
2023-03-01 13:35:45 -05:00
Matt McWilliams
5db5d477e4
Timing is now updated via rolling average on all projector and camera actions. This data is reset when profile is changed. This data is stored in the settings.json and loaded on start so estimates will improve the more it is used.
2023-02-28 15:55:02 -05:00
Matt McWilliams
7741134917
Create the Timing class
2023-02-28 14:30:17 -05:00
Matt McWilliams
3c19cd35cf
Resolves #4 (4 years ago!). Adds delay (stops scripts for X seconds), alert (displays an alert that stops script execution) and pause (displays a pre-populated alert).
2023-02-28 12:49:11 -05:00
Matt McWilliams
d9290f7262
Add branch_name.sh to print out only the branch name
2023-02-25 22:22:42 -05:00
Matt McWilliams
81b6846261
Only update patch on main
2023-02-25 22:22:18 -05:00
Matt McWilliams
02639466ee
By doing a check for active clients during the sequencer start and stop actions, the local display is no longer used. Resolves first part of #20 .
2023-02-25 17:00:11 -05:00
Matt McWilliams
6e2795d380
Remove ACK messages for ping, rely on
2023-02-25 16:33:55 -05:00
Matt McWilliams
8e35596088
Fixed the iOS issue. Also allow for fullscreen on all browsers (with no sleep). Can preview properly but normal mode does not work
2023-02-25 16:32:08 -05:00
Matt McWilliams
0162d012c5
Server can now display images and will completely preempt local display when done
2023-02-25 13:22:20 -05:00
Matt McWilliams
47fb673b78
Combined script and html into single request (problems with iOS safari).
...
Can get script loaded but still cannot connect to websocket server without SSL.
ALSO: Now can pre-empt opening new display if an active client is connected to server.
Otherwise will open a local link.
2023-02-25 13:11:40 -05:00
Matt McWilliams
f296488bc2
Further progress on #20 . TODO: Image display logic on the server side. Need to add image to proxy list and give it a properly-extensioned name and cmdAll.
...
ALSO: Server is not working on iOS.
2023-02-25 12:40:35 -05:00
Matt McWilliams
f5392aea9f
Resolves #74
2023-02-25 12:33:18 -05:00
Matt McWilliams
24b1301f9f
Adding contextIsolation: false to the display module fixes the initial issue in #74 , cannot use "require" but the escape button does not work due to "Cannot read properties of undefined (reading 'getCurrentWindow')"
2023-02-25 12:16:47 -05:00
Matt McWilliams
1290a8f324
Major progress on #20 . Promised-based websocket command structure is completed. All functionality needs to be placed into individual classes and any new functions get added to the server.
...
Will create entire thin client using this method.
2023-02-25 11:59:56 -05:00
Matt McWilliams
e64277e438
More work on #20 . Fix typos in display code. Should re-work script into transpiled ts file.
2023-02-25 02:08:56 -05:00
Matt McWilliams
c9bcb74a9f
Progress on #20 . Can start up a server and serve client.js
2023-02-25 02:08:05 -05:00
Matt McWilliams
42db1f81b8
Server work
2023-02-25 00:24:07 -05:00
Matt McWilliams
7222952eba
Update version nubmers
2023-02-19 19:43:12 -05:00
Matt McWilliams
744f10c948
Display version in app
2023-02-19 11:36:06 -05:00
Matt McWilliams
b50704a6a8
Fix minor layout issue on sequence page (on mac at least).
2023-02-19 01:28:18 -05:00
Matt McWilliams
c152806511
Now it works.
2023-02-19 01:27:19 -05:00
Matt McWilliams
4d9454daf2
Patch script now working
2023-02-19 01:22:44 -05:00
Matt McWilliams
e754c65602
Increment patch without npm install
2023-02-19 01:20:51 -05:00
Matt McWilliams
6116ada2fd
Getting a new error when compiling delay library. Attempt to stop autogenerating d.ts files.
...
src/delay/index.ts:11:10 - error TS2384: Overload signatures must all be ambient or non-ambient.
2023-02-19 00:55:17 -05:00
Matt McWilliams
ebc5504998
Add commands for takeup
2023-02-19 00:29:07 -05:00
5026cf869f
Arri-S work
2022-10-07 19:47:56 -04:00
72b5077356
Restructure includes and type definition files so that mscript runs
2022-08-07 22:18:58 -04:00
6601c030f7
Refactor mscript GUI code into Typescript
2022-08-07 22:10:53 -04:00
3ec1373f08
Caught a possible ancient bug in the loop logic for calculating state of camera and projector backwards movements.
2022-08-07 17:23:06 -04:00
Matt McWilliams
b29478cb58
Increment build patch version
2022-08-04 10:57:36 -04:00
Matt McWilliams
fe61e63e76
Add secondary projector and camera commands to the mscript module
2022-08-04 10:52:00 -04:00
Matt McWilliams
ee0ab663d7
Complete the alert feature. Have not created pause, but this could be done using the same alert object to prevent code duplication.
2022-08-03 09:02:47 -04:00
Matt McWilliams
3f759f5678
Add the ability to detect a single capper device
2022-07-17 09:57:52 -04:00
Matt McWilliams
9d0545aa4f
All capper features in app, can shoot blank frames, can turn on capper independently and can schedule blank frames in the sequencer. Some cleanup may be needed but there are no noticeable regressions in the app. TODO: Finish all arduino scripts.
2022-07-15 18:11:26 -04:00
70c2c695f0
All capper work. Need to wrap all actions in the 'b' command and push functionality to a lower level to prevent unneeded complexity.
2022-07-13 15:21:26 -04:00
8ec5816364
Adjust settings page to support Processing input
2022-07-13 10:15:47 -04:00
Matt McWilliams
585c47d6c7
Allow capper identifier in list of acceptable responses.
2022-06-13 08:08:42 -04:00
Matt McWilliams
129647b863
App work
2022-06-12 13:37:00 -04:00
Matt McWilliams
f585aa2a5a
Upgrade electron 11 -> 19 (huge jump). Install new remote module to preserve legacy communication protocol.
2022-06-04 11:11:23 -04:00
Matt McWilliams
Matthew McWilliams
Matthew McWilliams