 Matt McWilliams
|
a06e2869b9
|
Adjust bolt voids on corner_bracket
|
2023-11-08 18:15:31 -05:00 |
|
Matt McWilliams
|
6bafb263de
|
Projector rails added and printed
|
2023-11-04 09:38:20 -04:00 |
|
Matt McWilliams
|
493ff5fbf6
|
Update raisl and render all files
|
2023-11-01 00:27:46 -04:00 |
|
Matt McWilliams
|
c29e0880ac
|
Work on rails and lens gantry. First prototype is made. Rendering all.
|
2023-10-30 22:02:30 -04:00 |
|
Matt McWilliams
|
986c7a915b
|
Tweaks to lens sled gantry
|
2023-10-26 18:11:35 -04:00 |
|
Matt McWilliams
|
68b1b8b819
|
Double bearings in lens sled
|
2023-10-24 22:20:47 -04:00 |
|
Matt McWilliams
|
cf1514f53e
|
Print lens slded at full width (140mm for now)
|
2023-10-09 19:07:16 -04:00 |
|
Matt McWilliams
|
91ce2dd450
|
Add BOM log lines and move rail ends into its own module
|
2023-10-09 09:58:55 -04:00 |
|
Matt McWilliams
|
71c9efae42
|
Tweak to the rack and pinion mechanism to allow it to fit.
|
2023-10-09 09:58:35 -04:00 |
|
Matt McWilliams
|
754ef17b74
|
Update servo gear to fit reinforced servo connectors.
|
2023-10-08 11:41:35 -04:00 |
|
Matt McWilliams
|
5d4fec8c81
|
Start adding BOM log lines to build.
|
2023-10-07 15:26:10 -04:00 |
|
Matt McWilliams
|
1e0338a77f
|
Update rack and pinion library to one that produces valid geometry. Make first pass at rack and pinion gear
|
2023-10-06 13:47:15 -04:00 |
|
Matt McWilliams
|
e6b9628746
|
All projector work from today
|
2023-10-05 17:28:01 -04:00 |
|
Matt McWilliams
|
66b18dd351
|
Work on LED enclosure
|
2023-10-03 09:16:34 -04:00 |
|
Matt McWilliams
|
b5f5b6461a
|
Work on LED housings
|
2023-09-28 22:51:55 -04:00 |
|
Matt McWilliams
|
29ba125534
|
Work on LED housing.
|
2023-09-27 21:31:35 -04:00 |
|
Matt McWilliams
|
144af1414c
|
Merge remote-tracking branch 'origin/main'
|
2023-09-27 19:10:24 -04:00 |
|
Matt McWilliams
|
06906eca42
|
Start progress on rack and pinion nub mover
|
2023-09-27 19:10:13 -04:00 |
|
Matt McWilliams
|
0d47748d6a
|
Saved work in progress
|
2023-09-27 10:07:50 -04:00 |
|
Matt McWilliams
|
d2c7781d79
|
Servo notch puller progress
|
2023-09-25 21:53:10 -04:00 |
|
Matt McWilliams
|
37d4f50ef4
|
Add OpenSCAD/MCAD to the project to prevent double work. Including as a submodule appears to satisfy the requirement of the LGPL and allows mcopy to remain MIT licensed.
|
2023-09-25 12:25:56 -04:00 |
|
Matt McWilliams
|
082ac85c5c
|
Add deeper notches for 90 degree points
|
2023-09-25 12:14:59 -04:00 |
|
Matt McWilliams
|
cfca56ba48
|
Migrate stepper block into its own module
|
2023-09-24 22:58:14 -04:00 |
|
Matt McWilliams
|
c7cb4ddbc5
|
Create the first design of the orbital mount and make slight adjustment to panel (screws were not attaching fully).
|
2023-09-24 22:46:38 -04:00 |
|
Matt McWilliams
|
7f98d6028b
|
Commit all work in progress
|
2023-09-21 21:06:31 -04:00 |
|
Matt McWilliams
|
401822a7bb
|
Merge branch 'main' of ssh://git.sixteenmillimeter.com/16mm/mcopy
|
2023-09-15 19:18:09 -04:00 |
|
Matt McWilliams
|
173ba06590
|
Work on projector (wrong)
|
2023-09-14 23:30:29 -04:00 |
|
Matt McWilliams
|
2677118bad
|
fix
|
2023-09-12 22:36:18 -04:00 |
|
Matt McWilliams
|
8e90456d87
|
LED gate should be larger
|
2023-09-12 21:53:38 -04:00 |
|
Matt McWilliams
|
082dbc0826
|
Add void for motor, threaded rod (optional) and linear rod.
|
2023-09-06 00:01:00 -04:00 |
|
Matt McWilliams
|
5eccbbf6df
|
Remove part of the 2020 ends so that it can print without supports
|
2023-09-05 23:29:48 -04:00 |
|
Matt McWilliams
|
513deb7a0a
|
Render part of the projector.
|
2023-09-05 23:15:53 -04:00 |
|
Matt McWilliams
|
2b24dc647c
|
Update lens assembly to start using a 2020 frame
|
2023-09-05 23:15:32 -04:00 |
|
Matt McWilliams
|
f8e5968f30
|
Rename JK lens assembly to reflect it is a new design
|
2023-09-05 21:31:31 -04:00 |
|
Matt McWilliams
|
18b8c84fff
|
Add additional bearings to lens sled and voids for m5 bolts to hold in side bearings.
|
2023-09-04 13:10:23 -04:00 |
|
Matt McWilliams
|
1d6ccb7838
|
Enlarge void for m5 bolt. Add void for m5 nut.
|
2023-09-04 11:43:01 -04:00 |
|
Matt McWilliams
|
a7a63a3be7
|
Render all projector and rails in current state
|
2023-09-04 10:49:20 -04:00 |
|
Matt McWilliams
|
03f2b55762
|
Fucked up the merge
|
2023-08-29 23:33:42 -04:00 |
|
Matt McWilliams
|
6714374639
|
restore work from tonight
|
2023-08-29 23:11:24 -04:00 |
|
Matt McWilliams
|
b6b1f5d5ba
|
Parts work
|
2023-08-29 22:34:55 -04:00 |
|
Matt McWilliams
|
d778adc7d0
|
Add LED holder concept to projector panel design
|
2023-08-29 17:05:53 -04:00 |
|
Matt McWilliams
|
b30c637c10
|
Add structures to insert 2020 Tslot into to make rails fit more snug
|
2023-08-23 23:35:00 -04:00 |
|
Matt McWilliams
|
f16795b11c
|
Render the mcopy rails parts in current form
|
2023-08-23 22:27:06 -04:00 |
|
Matt McWilliams
|
86c88c4ac2
|
Printing a prototype for the lens sled
|
2023-08-23 00:14:47 -04:00 |
|
Matt McWilliams
|
fbab0c043a
|
Give up on SCAD makefile
|
2023-08-21 22:47:29 -04:00 |
|
Matt McWilliams
|
1a01a4f05e
|
Update sprocketed_roller
|
2023-08-21 22:47:05 -04:00 |
|
Matt McWilliams
|
b0305ae6da
|
Run on all but 1 core. Update JK rails to use actual measurement
|
2023-08-21 22:46:42 -04:00 |
|
Matt McWilliams
|
dd4834de04
|
Render rails parts (still WIP)
|
2023-08-21 19:39:08 -04:00 |
|
Matt McWilliams
|
51d440fccc
|
Render all working CPC connector parts
|
2023-08-21 19:38:16 -04:00 |
|
Matt McWilliams
|
2e3ed56bb3
|
Update part names of bellows.scad. Render missing magnetic board.
|
2023-08-21 19:34:21 -04:00 |