 Matt McWilliams
|
67a290a02a
|
Add a bellows adapter for Canon RF cameras and an ACME bellows
|
2024-04-14 13:34:41 -06:00 |
|
Matt McWilliams
|
63f4278b2b
|
Resolve startup order issues and explanation for all the delays that were meager attempts to solve a race condition. By moving more IPC connectionts to handles, which can be awaited, there are no more attempts to send message to light object that fails because it has not yet been instantiated.
|
2024-04-06 23:37:30 -04:00 |
|
Matt McWilliams
|
6778f871db
|
Devices, serial and type terms were updated everywhere in code except in the settings object.
|
2024-04-06 20:29:56 -04:00 |
|
Matt McWilliams
|
edc72a5486
|
Do not overwrite data with an empty object. Overwrite values if there are keys in the object.
|
2024-04-06 20:15:19 -04:00 |
|
Matt McWilliams
|
2779258111
|
List of devices looks strange on laptop. Attempt at fix here
|
2024-04-06 20:10:14 -04:00 |
|
Matt McWilliams
|
da735779b4
|
Add more trycatches add more logs. Not sure where failure is.
|
2024-04-06 20:00:54 -04:00 |
|
Matt McWilliams
|
b7e2e912f4
|
Figure out why devices.ready() is not reaching end of method on Mono laptop
|
2024-04-06 19:53:04 -04:00 |
|
Matt McWilliams
|
d34172d8e9
|
Use device.profile() method, seemingly not implemented properly
|
2024-04-06 19:37:29 -04:00 |
|
Matt McWilliams
|
f30ce78f9d
|
Suppress warnings from Intval and execRaw during compilation. Add logging to ready to test on Mono laptop
|
2024-04-06 19:18:15 -04:00 |
|
Matt McWilliams
|
ed767aedb5
|
Recompile with newer modules.
|
2024-04-06 19:09:50 -04:00 |
|
Matt McWilliams
|
1e2b65644d
|
Update package lock files to work with node16 and electron19
|
2024-04-06 18:55:46 -04:00 |
|
Matt McWilliams
|
3f58bbc617
|
Merged changes from work script into JKMM100, works on device in both work script and deployment one
|
2024-04-06 15:48:02 -04:00 |
|
Matt McWilliams
|
d31ac53bd1
|
Back is ready to print
|
2024-01-09 13:54:01 -05:00 |
|
Matt McWilliams
|
9b954852aa
|
Add the first draft for the CPC plug back
|
2024-01-08 15:49:08 -05:00 |
|
Matt McWilliams
|
3758916fb5
|
Adjust plug insert
|
2024-01-06 17:56:55 -05:00 |
|
Matt McWilliams
|
25c1395655
|
make insert thicker for betther overall strength of the plug
|
2024-01-06 14:30:00 -05:00 |
|
Matt McWilliams
|
440edd7b18
|
Add 5mm marks to bolex plate
|
2023-12-27 23:56:10 -05:00 |
|
Matt McWilliams
|
a2f045841f
|
Fix bolt countersink in bolex mounting block. Add center line to top
|
2023-12-27 20:04:43 -05:00 |
|
Matt McWilliams
|
c890107e1e
|
Experimental refactor, move commonly-used pattern of cylinder() module with 4 names arguments to cy() with 3 positional arguments, D = diameter, H = height, and FN = $fn. Might improve readability and reduce repetative use of center = true.
|
2023-12-26 17:37:39 -05:00 |
|
Matt McWilliams
|
a5df1650b9
|
Move nuts to bottom of camera sled and bolts can drop in from the top (easier assembly, bolts can be glued in place or held in more easily). Create camera sled bolex plate and modify the bolex standoff to accomodate it. WIP.
|
2023-12-23 23:08:59 -05:00 |
|
Matt McWilliams
|
173ce499bc
|
CPC connector work
|
2023-12-15 19:40:18 -05:00 |
|
Matt McWilliams
|
3c5e31a961
|
Work on CPC Connector plug
|
2023-12-10 22:48:12 -05:00 |
|
Matt McWilliams
|
0f893d94c4
|
Fix the dual projector script and add notes
|
2023-11-30 22:32:48 -05:00 |
|
Matt McWilliams
|
b08f5094d5
|
Make a solid bearing roller
|
2023-11-30 22:32:33 -05:00 |
|
Matt McWilliams
|
70e046eeb7
|
Fix plug diameter
|
2023-11-30 22:32:18 -05:00 |
|
Matt McWilliams
|
58d0742187
|
Add takeup signal terminals to the mcopy projector board.
|
2023-11-28 23:09:09 -05:00 |
|
Matt McWilliams
|
f84e8b741a
|
Developed a seemingly working fix with the "correction loop" strategy. Might be putting the motor through hell but it is consistent.
|
2023-11-25 20:22:44 -05:00 |
|
Matt McWilliams
|
fcf24b5539
|
Add the OFFSET command to the McopySerial library
|
2023-11-25 20:06:16 -05:00 |
|
Matt McWilliams
|
128a4d2ded
|
Update mcopy_JKMM100_work to have McopySerial library
|
2023-11-25 20:05:52 -05:00 |
|
Matt McWilliams
|
b14d24e650
|
Prototype for Arduino Mega shield for projector.
|
2023-11-25 18:08:10 -05:00 |
|
Matt McWilliams
|
7995665c6b
|
Add camera sled
|
2023-11-24 10:58:20 -05:00 |
|
Matt McWilliams
|
a22906d3c2
|
Add mcopy projector board.
|
2023-11-22 17:33:23 -05:00 |
|
Matt McWilliams
|
042533dc85
|
Add plugs for linear bearings in rail ends.
|
2023-11-19 16:08:37 -05:00 |
|
Matt McWilliams
|
5fbefeecbf
|
Update to the orbital brace
|
2023-11-13 20:43:13 -05:00 |
|
Matt McWilliams
|
a9772ff081
|
Changes to the brace to allow the projector to fit. Made Y of panel larger.
|
2023-11-13 20:41:26 -05:00 |
|
Matt McWilliams
|
cdf983c7c6
|
Render STLs for mcopy_projector and mcopy_rails. Make tweaks to orbital mount to fit bolts.
|
2023-11-12 15:22:23 -05:00 |
|
Matt McWilliams
|
03f886580f
|
Created orbital brace corner and rendered additional stls
|
2023-11-09 15:54:56 -05:00 |
|
Matt McWilliams
|
a06e2869b9
|
Adjust bolt voids on corner_bracket
|
2023-11-08 18:15:31 -05:00 |
|
Matt McWilliams
|
6bafb263de
|
Projector rails added and printed
|
2023-11-04 09:38:20 -04:00 |
|
Matt McWilliams
|
493ff5fbf6
|
Update raisl and render all files
|
2023-11-01 00:27:46 -04:00 |
|
Matt McWilliams
|
c29e0880ac
|
Work on rails and lens gantry. First prototype is made. Rendering all.
|
2023-10-30 22:02:30 -04:00 |
|
Matt McWilliams
|
986c7a915b
|
Tweaks to lens sled gantry
|
2023-10-26 18:11:35 -04:00 |
|
Matt McWilliams
|
68b1b8b819
|
Double bearings in lens sled
|
2023-10-24 22:20:47 -04:00 |
|
Matt McWilliams
|
382ba56fa7
|
Create a prospective "inaccurate" analogReadAverage method.
|
2023-10-10 22:29:02 -04:00 |
|
Matt McWilliams
|
24d6685047
|
Use I to trigger projector.home()
|
2023-10-10 22:12:31 -04:00 |
|
Matt McWilliams
|
565d2ecceb
|
Add second dataset for testing findPeak method
|
2023-10-10 21:20:51 -04:00 |
|
Matt McWilliams
|
c4456e458f
|
Add "home" as command character "I".
|
2023-10-10 21:16:49 -04:00 |
|
Matt McWilliams
|
f707dedc91
|
New homing behavior. Ready to port back to original.
|
2023-10-09 22:59:05 -04:00 |
|
Matt McWilliams
|
702fc4680d
|
Had accidentally switched motors, explaining odd homing behavior. New homing behavior whips ass.
|
2023-10-09 22:58:48 -04:00 |
|
Matt McWilliams
|
99b63150ac
|
Add more smoothing during homing step. Is running consistently but is ending with motor in wrong position each time. Very strange.
|
2023-10-09 20:52:58 -04:00 |