Commit Graph

192 Commits

Author SHA1 Message Date
Matt McWilliams a5df1650b9 Move nuts to bottom of camera sled and bolts can drop in from the top (easier assembly, bolts can be glued in place or held in more easily). Create camera sled bolex plate and modify the bolex standoff to accomodate it. WIP. 2023-12-23 23:08:59 -05:00
Matt McWilliams 173ce499bc CPC connector work 2023-12-15 19:40:18 -05:00
Matt McWilliams 3c5e31a961 Work on CPC Connector plug 2023-12-10 22:48:12 -05:00
Matt McWilliams 0f893d94c4 Fix the dual projector script and add notes 2023-11-30 22:32:48 -05:00
Matt McWilliams b08f5094d5 Make a solid bearing roller 2023-11-30 22:32:33 -05:00
Matt McWilliams 70e046eeb7 Fix plug diameter 2023-11-30 22:32:18 -05:00
Matt McWilliams 58d0742187 Add takeup signal terminals to the mcopy projector board. 2023-11-28 23:09:09 -05:00
Matt McWilliams f84e8b741a Developed a seemingly working fix with the "correction loop" strategy. Might be putting the motor through hell but it is consistent. 2023-11-25 20:22:44 -05:00
Matt McWilliams fcf24b5539 Add the OFFSET command to the McopySerial library 2023-11-25 20:06:16 -05:00
Matt McWilliams 128a4d2ded Update mcopy_JKMM100_work to have McopySerial library 2023-11-25 20:05:52 -05:00
Matt McWilliams b14d24e650 Prototype for Arduino Mega shield for projector. 2023-11-25 18:08:10 -05:00
Matt McWilliams 7995665c6b Add camera sled 2023-11-24 10:58:20 -05:00
Matt McWilliams a22906d3c2 Add mcopy projector board. 2023-11-22 17:33:23 -05:00
Matt McWilliams 042533dc85 Add plugs for linear bearings in rail ends. 2023-11-19 16:08:37 -05:00
Matt McWilliams 5fbefeecbf Update to the orbital brace 2023-11-13 20:43:13 -05:00
Matt McWilliams a9772ff081 Changes to the brace to allow the projector to fit. Made Y of panel larger. 2023-11-13 20:41:26 -05:00
Matt McWilliams cdf983c7c6 Render STLs for mcopy_projector and mcopy_rails. Make tweaks to orbital mount to fit bolts. 2023-11-12 15:22:23 -05:00
Matt McWilliams 03f886580f Created orbital brace corner and rendered additional stls 2023-11-09 15:54:56 -05:00
Matt McWilliams a06e2869b9 Adjust bolt voids on corner_bracket 2023-11-08 18:15:31 -05:00
Matt McWilliams 6bafb263de Projector rails added and printed 2023-11-04 09:38:20 -04:00
Matt McWilliams 493ff5fbf6 Update raisl and render all files 2023-11-01 00:27:46 -04:00
Matt McWilliams c29e0880ac Work on rails and lens gantry. First prototype is made. Rendering all. 2023-10-30 22:02:30 -04:00
Matt McWilliams 986c7a915b Tweaks to lens sled gantry 2023-10-26 18:11:35 -04:00
Matt McWilliams 68b1b8b819 Double bearings in lens sled 2023-10-24 22:20:47 -04:00
Matt McWilliams 382ba56fa7 Create a prospective "inaccurate" analogReadAverage method. 2023-10-10 22:29:02 -04:00
Matt McWilliams 24d6685047 Use I to trigger projector.home() 2023-10-10 22:12:31 -04:00
Matt McWilliams 565d2ecceb Add second dataset for testing findPeak method 2023-10-10 21:20:51 -04:00
Matt McWilliams c4456e458f Add "home" as command character "I". 2023-10-10 21:16:49 -04:00
Matt McWilliams f707dedc91 New homing behavior. Ready to port back to original. 2023-10-09 22:59:05 -04:00
Matt McWilliams 702fc4680d Had accidentally switched motors, explaining odd homing behavior. New homing behavior whips ass. 2023-10-09 22:58:48 -04:00
Matt McWilliams 99b63150ac Add more smoothing during homing step. Is running consistently but is ending with motor in wrong position each time. Very strange. 2023-10-09 20:52:58 -04:00
Matt McWilliams 6e7c226c57 Make a sample script for analyzing the array during homing step. 2023-10-09 20:52:18 -04:00
Matt McWilliams c8e5f7b742 Caught one bug after separating out code 2023-10-09 19:15:30 -04:00
Matt McWilliams 0cf147d185 Piece off homing code into its own script. 2023-10-09 19:09:50 -04:00
Matt McWilliams cf1514f53e Print lens slded at full width (140mm for now) 2023-10-09 19:07:16 -04:00
Matt McWilliams af3843a8ef Add servo functionality for rack and pinion motion. Need to fix home feature. 2023-10-09 09:59:19 -04:00
Matt McWilliams 91ce2dd450 Add BOM log lines and move rail ends into its own module 2023-10-09 09:58:55 -04:00
Matt McWilliams 71c9efae42 Tweak to the rack and pinion mechanism to allow it to fit. 2023-10-09 09:58:35 -04:00
Matt McWilliams 08ce0d792b Fix for case where this.confirmExec is not a function 2023-10-08 18:15:31 -04:00
Matt McWilliams 754ef17b74 Update servo gear to fit reinforced servo connectors. 2023-10-08 11:41:35 -04:00
Matt McWilliams 5d4fec8c81 Start adding BOM log lines to build. 2023-10-07 15:26:10 -04:00
Matt McWilliams 1e0338a77f Update rack and pinion library to one that produces valid geometry. Make first pass at rack and pinion gear 2023-10-06 13:47:15 -04:00
Matt McWilliams e6b9628746 All projector work from today 2023-10-05 17:28:01 -04:00
Matt McWilliams 6f68081dc5 Restore the home method. Now it compiles. 2023-10-03 13:44:04 -04:00
Matt McWilliams 66b18dd351 Work on LED enclosure 2023-10-03 09:16:34 -04:00
Matt McWilliams b5f5b6461a Work on LED housings 2023-09-28 22:51:55 -04:00
Matt McWilliams 6dd29d9596 Disable home feature for now. Fixed impossibly stupid bug with reverse mode. Used uint16_t rather than int16_t causing an overflow. 2023-09-28 20:46:45 -04:00
Matt McWilliams 29ba125534 Work on LED housing. 2023-09-27 21:31:35 -04:00
Matt McWilliams 06906eca42 Start progress on rack and pinion nub mover 2023-09-27 19:10:13 -04:00
Matt McWilliams b1c8192625 Projector firmware progress: currently the homing function will not compile due to errors with reference and so the sketch method needs to be broken into workable smaller methods 2023-09-25 21:54:31 -04:00
Matt McWilliams d2c7781d79 Servo notch puller progress 2023-09-25 21:53:10 -04:00
Matt McWilliams 37d4f50ef4 Add OpenSCAD/MCAD to the project to prevent double work. Including as a submodule appears to satisfy the requirement of the LGPL and allows mcopy to remain MIT licensed. 2023-09-25 12:25:56 -04:00
Matt McWilliams 082ac85c5c Add deeper notches for 90 degree points 2023-09-25 12:14:59 -04:00
Matt McWilliams cfca56ba48 Migrate stepper block into its own module 2023-09-24 22:58:14 -04:00
Matt McWilliams c7cb4ddbc5 Create the first design of the orbital mount and make slight adjustment to panel (screws were not attaching fully). 2023-09-24 22:46:38 -04:00
Matt McWilliams 7f98d6028b Commit all work in progress 2023-09-21 21:06:31 -04:00
Matt McWilliams 401822a7bb Merge branch 'main' of ssh://git.sixteenmillimeter.com/16mm/mcopy 2023-09-15 19:18:09 -04:00
Matt McWilliams 173ba06590 Work on projector (wrong) 2023-09-14 23:30:29 -04:00
Matt McWilliams 8e90456d87 LED gate should be larger 2023-09-12 21:53:38 -04:00
Matt McWilliams 0b880a5e79 Add accurateRead functions and Readme 2023-09-06 15:41:36 -04:00
Matt McWilliams 082dbc0826 Add void for motor, threaded rod (optional) and linear rod. 2023-09-06 00:01:00 -04:00
Matt McWilliams 5eccbbf6df Remove part of the 2020 ends so that it can print without supports 2023-09-05 23:29:48 -04:00
Matt McWilliams 513deb7a0a Render part of the projector. 2023-09-05 23:15:53 -04:00
Matt McWilliams 2b24dc647c Update lens assembly to start using a 2020 frame 2023-09-05 23:15:32 -04:00
Matt McWilliams f8e5968f30 Rename JK lens assembly to reflect it is a new design 2023-09-05 21:31:31 -04:00
Matt McWilliams 18b8c84fff Add additional bearings to lens sled and voids for m5 bolts to hold in side bearings. 2023-09-04 13:10:23 -04:00
Matt McWilliams 1d6ccb7838 Enlarge void for m5 bolt. Add void for m5 nut. 2023-09-04 11:43:01 -04:00
Matt McWilliams a7a63a3be7 Render all projector and rails in current state 2023-09-04 10:49:20 -04:00
Matt McWilliams 153ef9eceb Use fast-csg and parallel with 8 jobs hardcoded 2023-09-04 10:48:54 -04:00
Matt McWilliams 03f2b55762 Fucked up the merge 2023-08-29 23:33:42 -04:00
Matt McWilliams 6714374639 restore work from tonight 2023-08-29 23:11:24 -04:00
Matt McWilliams b6b1f5d5ba Parts work 2023-08-29 22:34:55 -04:00
Matt McWilliams b30c637c10 Add structures to insert 2020 Tslot into to make rails fit more snug 2023-08-23 23:35:00 -04:00
Matt McWilliams f16795b11c Render the mcopy rails parts in current form 2023-08-23 22:27:06 -04:00
Matt McWilliams 86c88c4ac2 Printing a prototype for the lens sled 2023-08-23 00:14:47 -04:00
Matt McWilliams dd4834de04 Render rails parts (still WIP) 2023-08-21 19:39:08 -04:00
Matt McWilliams 2d90c127a3 Render existing projector panel parts 2023-08-21 19:38:55 -04:00
Matt McWilliams 51d440fccc Render all working CPC connector parts 2023-08-21 19:38:16 -04:00
Matt McWilliams 2e3ed56bb3 Update part names of bellows.scad. Render missing magnetic board. 2023-08-21 19:34:21 -04:00
Matt McWilliams 4be57f3128 Update part names for CPC connectors 2023-08-21 19:31:20 -04:00
Matt McWilliams de6f0d0495 Compile all parts in project, optionally using GNU parallel if available. 2023-08-21 19:04:39 -04:00
Matt McWilliams 010927c5ca Rename rails_2020 to mcopy_rails 2023-08-20 23:55:27 -04:00
Matt McWilliams 3346bf01af Work on rails having a bearing 2023-08-20 23:54:21 -04:00
Matt McWilliams 788cac7d50 All work towards creating a sled rail for the lens carriage assembly 2023-08-20 18:35:48 -04:00
Matt McWilliams a8a33a823a Update to 1.8.0 to reflect new breaking changes in app 2023-08-06 15:22:38 -04:00
Matt McWilliams e7e7f86ab3 Manual merge from capper branch: all changes to devices library. 2023-08-06 15:04:33 -04:00
Matt McWilliams 386285d48c Definition file that prevents compiler warnings on some platforms. Still unexplained because tsc is installed local to the project. 2023-08-06 14:58:26 -04:00
Matt McWilliams c4119ab7cc Manual merge from capper branch: all changes to arduino library with some improvements. 2023-08-06 14:56:42 -04:00
Matt McWilliams 176643f148 Manual merge from capper branch: all changes to display library. 2023-08-06 14:36:31 -04:00
Matt McWilliams 8b235bb6b0 mitchell work 2023-08-05 14:42:03 -04:00
Matt McWilliams 174b900cd8 Update commands 2023-03-18 17:00:13 -04:00
Matt McWilliams 3c19cd35cf Resolves (4 years ago!). Adds delay (stops scripts for X seconds), alert (displays an alert that stops script execution) and pause (displays a pre-populated alert). 2023-02-28 12:49:11 -05:00
Matt McWilliams d9290f7262 Add branch_name.sh to print out only the branch name 2023-02-25 22:22:42 -05:00
Matt McWilliams 81b6846261 Only update patch on main 2023-02-25 22:22:18 -05:00
Matt McWilliams 02639466ee By doing a check for active clients during the sequencer start and stop actions, the local display is no longer used. Resolves first part of . 2023-02-25 17:00:11 -05:00
Matt McWilliams 6e2795d380 Remove ACK messages for ping, rely on 2023-02-25 16:33:55 -05:00
Matt McWilliams 8e35596088 Fixed the iOS issue. Also allow for fullscreen on all browsers (with no sleep). Can preview properly but normal mode does not work 2023-02-25 16:32:08 -05:00
Matt McWilliams 0162d012c5 Server can now display images and will completely preempt local display when done 2023-02-25 13:22:20 -05:00
Matt McWilliams 47fb673b78 Combined script and html into single request (problems with iOS safari).
Can get script loaded but still cannot connect to websocket server without SSL.

ALSO: Now can pre-empt opening new display if an active client is connected to server.
Otherwise will open a local link.
2023-02-25 13:11:40 -05:00
Matt McWilliams f296488bc2 Further progress on . TODO: Image display logic on the server side. Need to add image to proxy list and give it a properly-extensioned name and cmdAll.
ALSO: Server is not working on iOS.
2023-02-25 12:40:35 -05:00