 Matt McWilliams
|
06906eca42
|
Start progress on rack and pinion nub mover
|
2023-09-27 19:10:13 -04:00 |
|
Matt McWilliams
|
d2c7781d79
|
Servo notch puller progress
|
2023-09-25 21:53:10 -04:00 |
|
Matt McWilliams
|
37d4f50ef4
|
Add OpenSCAD/MCAD to the project to prevent double work. Including as a submodule appears to satisfy the requirement of the LGPL and allows mcopy to remain MIT licensed.
|
2023-09-25 12:25:56 -04:00 |
|
Matt McWilliams
|
082ac85c5c
|
Add deeper notches for 90 degree points
|
2023-09-25 12:14:59 -04:00 |
|
Matt McWilliams
|
cfca56ba48
|
Migrate stepper block into its own module
|
2023-09-24 22:58:14 -04:00 |
|
Matt McWilliams
|
c7cb4ddbc5
|
Create the first design of the orbital mount and make slight adjustment to panel (screws were not attaching fully).
|
2023-09-24 22:46:38 -04:00 |
|
Matt McWilliams
|
7f98d6028b
|
Commit all work in progress
|
2023-09-21 21:06:31 -04:00 |
|
Matt McWilliams
|
401822a7bb
|
Merge branch 'main' of ssh://git.sixteenmillimeter.com/16mm/mcopy
|
2023-09-15 19:18:09 -04:00 |
|
Matt McWilliams
|
173ba06590
|
Work on projector (wrong)
|
2023-09-14 23:30:29 -04:00 |
|
Matt McWilliams
|
2677118bad
|
fix
|
2023-09-12 22:36:18 -04:00 |
|
Matt McWilliams
|
8e90456d87
|
LED gate should be larger
|
2023-09-12 21:53:38 -04:00 |
|
Matt McWilliams
|
082dbc0826
|
Add void for motor, threaded rod (optional) and linear rod.
|
2023-09-06 00:01:00 -04:00 |
|
Matt McWilliams
|
5eccbbf6df
|
Remove part of the 2020 ends so that it can print without supports
|
2023-09-05 23:29:48 -04:00 |
|
Matt McWilliams
|
513deb7a0a
|
Render part of the projector.
|
2023-09-05 23:15:53 -04:00 |
|
Matt McWilliams
|
2b24dc647c
|
Update lens assembly to start using a 2020 frame
|
2023-09-05 23:15:32 -04:00 |
|
Matt McWilliams
|
f8e5968f30
|
Rename JK lens assembly to reflect it is a new design
|
2023-09-05 21:31:31 -04:00 |
|
Matt McWilliams
|
18b8c84fff
|
Add additional bearings to lens sled and voids for m5 bolts to hold in side bearings.
|
2023-09-04 13:10:23 -04:00 |
|
Matt McWilliams
|
1d6ccb7838
|
Enlarge void for m5 bolt. Add void for m5 nut.
|
2023-09-04 11:43:01 -04:00 |
|
Matt McWilliams
|
a7a63a3be7
|
Render all projector and rails in current state
|
2023-09-04 10:49:20 -04:00 |
|
Matt McWilliams
|
03f2b55762
|
Fucked up the merge
|
2023-08-29 23:33:42 -04:00 |
|
Matt McWilliams
|
6714374639
|
restore work from tonight
|
2023-08-29 23:11:24 -04:00 |
|
Matt McWilliams
|
b6b1f5d5ba
|
Parts work
|
2023-08-29 22:34:55 -04:00 |
|
Matt McWilliams
|
d778adc7d0
|
Add LED holder concept to projector panel design
|
2023-08-29 17:05:53 -04:00 |
|
Matt McWilliams
|
b30c637c10
|
Add structures to insert 2020 Tslot into to make rails fit more snug
|
2023-08-23 23:35:00 -04:00 |
|
Matt McWilliams
|
f16795b11c
|
Render the mcopy rails parts in current form
|
2023-08-23 22:27:06 -04:00 |
|
Matt McWilliams
|
86c88c4ac2
|
Printing a prototype for the lens sled
|
2023-08-23 00:14:47 -04:00 |
|
Matt McWilliams
|
fbab0c043a
|
Give up on SCAD makefile
|
2023-08-21 22:47:29 -04:00 |
|
Matt McWilliams
|
1a01a4f05e
|
Update sprocketed_roller
|
2023-08-21 22:47:05 -04:00 |
|
Matt McWilliams
|
b0305ae6da
|
Run on all but 1 core. Update JK rails to use actual measurement
|
2023-08-21 22:46:42 -04:00 |
|
Matt McWilliams
|
dd4834de04
|
Render rails parts (still WIP)
|
2023-08-21 19:39:08 -04:00 |
|
Matt McWilliams
|
51d440fccc
|
Render all working CPC connector parts
|
2023-08-21 19:38:16 -04:00 |
|
Matt McWilliams
|
2e3ed56bb3
|
Update part names of bellows.scad. Render missing magnetic board.
|
2023-08-21 19:34:21 -04:00 |
|
Matt McWilliams
|
4be57f3128
|
Update part names for CPC connectors
|
2023-08-21 19:31:20 -04:00 |
|
Matt McWilliams
|
1ae524ff31
|
Start making a parts list in rails end file
|
2023-08-21 18:23:16 -04:00 |
|
Matt McWilliams
|
010927c5ca
|
Rename rails_2020 to mcopy_rails
|
2023-08-20 23:55:27 -04:00 |
|
Matt McWilliams
|
3346bf01af
|
Work on rails having a bearing
|
2023-08-20 23:54:21 -04:00 |
|
Matt McWilliams
|
788cac7d50
|
All work towards creating a sled rail for the lens carriage assembly
|
2023-08-20 18:35:48 -04:00 |
|
Matt McWilliams
|
4c0fa2ba41
|
rails end prototype
|
2023-08-20 13:57:00 -04:00 |
|
Matt McWilliams
|
83209f466f
|
Update all submodules
|
2023-08-20 12:46:36 -04:00 |
|
Matt McWilliams
|
10c452c1b3
|
Work on rails
|
2023-08-20 12:37:50 -04:00 |
|
Matt McWilliams
|
8b235bb6b0
|
mitchell work
|
2023-08-05 14:42:03 -04:00 |
|
Matt McWilliams
|
3b03eb70fb
|
Add placeholder for original stepper motor
|
2023-07-24 21:20:06 -04:00 |
|
Matt McWilliams
|
55b39e7db3
|
Tweak to USB protector
|
2023-07-18 23:13:20 -04:00 |
|
Matt McWilliams
|
505a2a71e7
|
Add magnetic bellows models
|
2023-07-14 21:40:03 -04:00 |
|
Matt McWilliams
|
f47ea2d382
|
Work on rails ends
|
2023-07-10 23:07:32 -04:00 |
|
Matt McWilliams
|
621948fbac
|
Work on mcopy_rails concepts
|
2023-07-05 15:17:56 -04:00 |
Matthew McWilliams
|
6d379d284b
|
on site work at MONO
|
2023-07-01 16:34:07 -04:00 |
|
Matt McWilliams
|
3ec93ab3b1
|
work
|
2023-05-16 23:05:13 -04:00 |
|
Matt McWilliams
|
10c29d3af1
|
Add a set screw to the gate_key
|
2023-05-15 21:48:09 -04:00 |
|
Matt McWilliams
|
41840b90c8
|
Update gitsub
|
2023-05-15 12:36:03 -04:00 |