Matt McWilliams
702fc4680d
Had accidentally switched motors, explaining odd homing behavior. New homing behavior whips ass.
2023-10-09 22:58:48 -04:00
Matt McWilliams
99b63150ac
Add more smoothing during homing step. Is running consistently but is ending with motor in wrong position each time. Very strange.
2023-10-09 20:52:58 -04:00
Matt McWilliams
6e7c226c57
Make a sample script for analyzing the array during homing step.
2023-10-09 20:52:18 -04:00
Matt McWilliams
c8e5f7b742
Caught one bug after separating out code
2023-10-09 19:15:30 -04:00
Matt McWilliams
0cf147d185
Piece off homing code into its own script.
2023-10-09 19:09:50 -04:00
Matt McWilliams
cf1514f53e
Print lens slded at full width (140mm for now)
2023-10-09 19:07:16 -04:00
Matt McWilliams
af3843a8ef
Add servo functionality for rack and pinion motion. Need to fix home feature.
2023-10-09 09:59:19 -04:00
Matt McWilliams
91ce2dd450
Add BOM log lines and move rail ends into its own module
2023-10-09 09:58:55 -04:00
Matt McWilliams
71c9efae42
Tweak to the rack and pinion mechanism to allow it to fit.
2023-10-09 09:58:35 -04:00
Matt McWilliams
08ce0d792b
Fix for case where this.confirmExec is not a function
2023-10-08 18:15:31 -04:00
Matt McWilliams
754ef17b74
Update servo gear to fit reinforced servo connectors.
2023-10-08 11:41:35 -04:00
Matt McWilliams
5d4fec8c81
Start adding BOM log lines to build.
2023-10-07 15:26:10 -04:00
Matt McWilliams
1e0338a77f
Update rack and pinion library to one that produces valid geometry. Make first pass at rack and pinion gear
2023-10-06 13:47:15 -04:00
Matt McWilliams
e6b9628746
All projector work from today
2023-10-05 17:28:01 -04:00
Matt McWilliams
6f68081dc5
Restore the home method. Now it compiles.
2023-10-03 13:44:04 -04:00
Matt McWilliams
66b18dd351
Work on LED enclosure
2023-10-03 09:16:34 -04:00
Matt McWilliams
b5f5b6461a
Work on LED housings
2023-09-28 22:51:55 -04:00
Matt McWilliams
6dd29d9596
Disable home feature for now. Fixed impossibly stupid bug with reverse mode. Used uint16_t rather than int16_t causing an overflow.
2023-09-28 20:46:45 -04:00
Matt McWilliams
29ba125534
Work on LED housing.
2023-09-27 21:31:35 -04:00
Matt McWilliams
06906eca42
Start progress on rack and pinion nub mover
2023-09-27 19:10:13 -04:00
Matt McWilliams
b1c8192625
Projector firmware progress: currently the homing function will not compile due to errors with reference and so the sketch method needs to be broken into workable smaller methods
2023-09-25 21:54:31 -04:00
Matt McWilliams
d2c7781d79
Servo notch puller progress
2023-09-25 21:53:10 -04:00
Matt McWilliams
37d4f50ef4
Add OpenSCAD/MCAD to the project to prevent double work. Including as a submodule appears to satisfy the requirement of the LGPL and allows mcopy to remain MIT licensed.
2023-09-25 12:25:56 -04:00
Matt McWilliams
082ac85c5c
Add deeper notches for 90 degree points
2023-09-25 12:14:59 -04:00
Matt McWilliams
cfca56ba48
Migrate stepper block into its own module
2023-09-24 22:58:14 -04:00
Matt McWilliams
c7cb4ddbc5
Create the first design of the orbital mount and make slight adjustment to panel (screws were not attaching fully).
2023-09-24 22:46:38 -04:00
Matt McWilliams
7f98d6028b
Commit all work in progress
2023-09-21 21:06:31 -04:00
Matt McWilliams
401822a7bb
Merge branch 'main' of ssh://git.sixteenmillimeter.com/16mm/mcopy
2023-09-15 19:18:09 -04:00
Matt McWilliams
173ba06590
Work on projector (wrong)
2023-09-14 23:30:29 -04:00
Matt McWilliams
8e90456d87
LED gate should be larger
2023-09-12 21:53:38 -04:00
Matt McWilliams
0b880a5e79
Add accurateRead functions and Readme
2023-09-06 15:41:36 -04:00
Matt McWilliams
082dbc0826
Add void for motor, threaded rod (optional) and linear rod.
2023-09-06 00:01:00 -04:00
Matt McWilliams
5eccbbf6df
Remove part of the 2020 ends so that it can print without supports
2023-09-05 23:29:48 -04:00
Matt McWilliams
513deb7a0a
Render part of the projector.
2023-09-05 23:15:53 -04:00
Matt McWilliams
2b24dc647c
Update lens assembly to start using a 2020 frame
2023-09-05 23:15:32 -04:00
Matt McWilliams
f8e5968f30
Rename JK lens assembly to reflect it is a new design
2023-09-05 21:31:31 -04:00
Matt McWilliams
18b8c84fff
Add additional bearings to lens sled and voids for m5 bolts to hold in side bearings.
2023-09-04 13:10:23 -04:00
Matt McWilliams
1d6ccb7838
Enlarge void for m5 bolt. Add void for m5 nut.
2023-09-04 11:43:01 -04:00
Matt McWilliams
a7a63a3be7
Render all projector and rails in current state
2023-09-04 10:49:20 -04:00
Matt McWilliams
153ef9eceb
Use fast-csg and parallel with 8 jobs hardcoded
2023-09-04 10:48:54 -04:00
Matt McWilliams
03f2b55762
Fucked up the merge
2023-08-29 23:33:42 -04:00
Matt McWilliams
6714374639
restore work from tonight
2023-08-29 23:11:24 -04:00
Matt McWilliams
b6b1f5d5ba
Parts work
2023-08-29 22:34:55 -04:00
Matt McWilliams
b30c637c10
Add structures to insert 2020 Tslot into to make rails fit more snug
2023-08-23 23:35:00 -04:00
Matt McWilliams
f16795b11c
Render the mcopy rails parts in current form
2023-08-23 22:27:06 -04:00
Matt McWilliams
86c88c4ac2
Printing a prototype for the lens sled
2023-08-23 00:14:47 -04:00
Matt McWilliams
dd4834de04
Render rails parts (still WIP)
2023-08-21 19:39:08 -04:00
Matt McWilliams
2d90c127a3
Render existing projector panel parts
2023-08-21 19:38:55 -04:00
Matt McWilliams
51d440fccc
Render all working CPC connector parts
2023-08-21 19:38:16 -04:00
Matt McWilliams
2e3ed56bb3
Update part names of bellows.scad. Render missing magnetic board.
2023-08-21 19:34:21 -04:00
Matt McWilliams
4be57f3128
Update part names for CPC connectors
2023-08-21 19:31:20 -04:00
Matt McWilliams
de6f0d0495
Compile all parts in project, optionally using GNU parallel if available.
2023-08-21 19:04:39 -04:00
Matt McWilliams
010927c5ca
Rename rails_2020 to mcopy_rails
2023-08-20 23:55:27 -04:00
Matt McWilliams
3346bf01af
Work on rails having a bearing
2023-08-20 23:54:21 -04:00
Matt McWilliams
788cac7d50
All work towards creating a sled rail for the lens carriage assembly
2023-08-20 18:35:48 -04:00
Matt McWilliams
a8a33a823a
Update to 1.8.0 to reflect new breaking changes in app
2023-08-06 15:22:38 -04:00
Matt McWilliams
e7e7f86ab3
Manual merge from capper branch: all changes to devices library.
2023-08-06 15:04:33 -04:00
Matt McWilliams
386285d48c
Definition file that prevents compiler warnings on some platforms. Still unexplained because tsc is installed local to the project.
2023-08-06 14:58:26 -04:00
Matt McWilliams
c4119ab7cc
Manual merge from capper branch: all changes to arduino library with some improvements.
2023-08-06 14:56:42 -04:00
Matt McWilliams
176643f148
Manual merge from capper branch: all changes to display library.
2023-08-06 14:36:31 -04:00
Matt McWilliams
8b235bb6b0
mitchell work
2023-08-05 14:42:03 -04:00
Matt McWilliams
174b900cd8
Update commands
2023-03-18 17:00:13 -04:00
Matt McWilliams
3c19cd35cf
Resolves #4 (4 years ago!). Adds delay (stops scripts for X seconds), alert (displays an alert that stops script execution) and pause (displays a pre-populated alert).
2023-02-28 12:49:11 -05:00
Matt McWilliams
d9290f7262
Add branch_name.sh to print out only the branch name
2023-02-25 22:22:42 -05:00
Matt McWilliams
81b6846261
Only update patch on main
2023-02-25 22:22:18 -05:00
Matt McWilliams
02639466ee
By doing a check for active clients during the sequencer start and stop actions, the local display is no longer used. Resolves first part of #20 .
2023-02-25 17:00:11 -05:00
Matt McWilliams
6e2795d380
Remove ACK messages for ping, rely on
2023-02-25 16:33:55 -05:00
Matt McWilliams
8e35596088
Fixed the iOS issue. Also allow for fullscreen on all browsers (with no sleep). Can preview properly but normal mode does not work
2023-02-25 16:32:08 -05:00
Matt McWilliams
0162d012c5
Server can now display images and will completely preempt local display when done
2023-02-25 13:22:20 -05:00
Matt McWilliams
47fb673b78
Combined script and html into single request (problems with iOS safari).
...
Can get script loaded but still cannot connect to websocket server without SSL.
ALSO: Now can pre-empt opening new display if an active client is connected to server.
Otherwise will open a local link.
2023-02-25 13:11:40 -05:00
Matt McWilliams
f296488bc2
Further progress on #20 . TODO: Image display logic on the server side. Need to add image to proxy list and give it a properly-extensioned name and cmdAll.
...
ALSO: Server is not working on iOS.
2023-02-25 12:40:35 -05:00
Matt McWilliams
f5392aea9f
Resolves #74
2023-02-25 12:33:18 -05:00
Matt McWilliams
24b1301f9f
Adding contextIsolation: false to the display module fixes the initial issue in #74 , cannot use "require" but the escape button does not work due to "Cannot read properties of undefined (reading 'getCurrentWindow')"
2023-02-25 12:16:47 -05:00
Matt McWilliams
1290a8f324
Major progress on #20 . Promised-based websocket command structure is completed. All functionality needs to be placed into individual classes and any new functions get added to the server.
...
Will create entire thin client using this method.
2023-02-25 11:59:56 -05:00
Matt McWilliams
e64277e438
More work on #20 . Fix typos in display code. Should re-work script into transpiled ts file.
2023-02-25 02:08:56 -05:00
Matt McWilliams
c9bcb74a9f
Progress on #20 . Can start up a server and serve client.js
2023-02-25 02:08:05 -05:00
Matt McWilliams
744f10c948
Display version in app
2023-02-19 11:36:06 -05:00
Matt McWilliams
b50704a6a8
Fix minor layout issue on sequence page (on mac at least).
2023-02-19 01:28:18 -05:00
Matt McWilliams
c152806511
Now it works.
2023-02-19 01:27:19 -05:00
Matt McWilliams
4d9454daf2
Patch script now working
2023-02-19 01:22:44 -05:00
Matt McWilliams
e754c65602
Increment patch without npm install
2023-02-19 01:20:51 -05:00
Matt McWilliams
682167db48
Add new commands for takeup forward and takeup backward
2023-01-15 10:09:55 -05:00
Matt McWilliams
b29478cb58
Increment build patch version
2022-08-04 10:57:36 -04:00
Matt McWilliams
9d0545aa4f
All capper features in app, can shoot blank frames, can turn on capper independently and can schedule blank frames in the sequencer. Some cleanup may be needed but there are no noticeable regressions in the app. TODO: Finish all arduino scripts.
2022-07-15 18:11:26 -04:00
Matt McWilliams
76799bd66d
Capper work
2022-07-13 08:28:18 -04:00
Matt McWilliams
c77201ef4e
Add new commands and identifiers for the capper, start moving into capital characters
2022-06-07 07:55:26 -04:00
Matt McWilliams
c15c376a2f
Start work on capper branch
2022-05-30 18:50:18 -04:00
Matt McWilliams
bbfe6fc657
Add option to use Processing with a server as a capture method triggered by the camera.
...
Enter a url into the Settings panel in the Processing URL input box and select the radio button.
2022-04-30 15:58:17 -04:00
Matt McWilliams
aac5e5d488
Increment patch to 1.6.9
2021-03-18 11:28:46 -04:00
Matt McWilliams
32f70be614
Fixes #50 - Support image sequences in filmout feature
2021-02-24 11:58:19 -05:00
Matt McWilliams
85bfa57127
Update all modules in app to latest version, including electron. Removed electron updater because of no plans to integrate and to reduce the app size.
2021-02-22 13:23:36 -05:00
8672b6584a
Work towards issue #52 . Adds a statement within the arduino.end() method that watches for an 'E' char byte and will alert the UI while pausing a running sequence. Needs to be in place for firmware to be able to throw errors to UI.
2020-09-29 13:48:06 -04:00
6eeeae85c8
Updated patch number, now working on 1.6.5
2020-08-18 14:21:07 -04:00
f02782d4da
Increment build to 1.6.4. Re-package and deploy for mac
2020-08-09 23:39:52 -04:00
0811222d27
Normalize paths being used in filmout feature. Purpose of this is to rely on fs module to correctly handle paths for windows because it was previously broken. Will run tests.
2020-07-26 22:26:34 -04:00
01cac728f5
Remove ImageMagick dependency. Replace sharp with jimp (prevent linux build issues). Jimp will also perform the same composite step as convert was. Light module is still disabled globally.
2020-04-24 14:33:58 -04:00
d70de98256
Pre-export all frames in video (with confirmation dialog). Greatly improves sequence times and reliablity in conjunction with last commit. Resolves #36 and resolves #39 .
2020-02-21 13:34:22 -05:00
549cd3cc04
1.5.2 changes. Build includes code not in repo :(
2020-01-21 11:38:50 -05:00
8dc955a5e7
FFprobe added as static binary. Needed for filmout feature.
2020-01-20 11:51:15 -05:00
ed75924e24
Filmout release 1.5.0.
2020-01-20 01:37:38 -05:00
Matt McWilliams
sixteenmillimeter