Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper

This commit is contained in:
Matt McWilliams 2022-06-12 13:37:52 -04:00
commit dae4e65aee
3 changed files with 49 additions and 22 deletions

View File

@ -1,6 +1,6 @@
#include <Servo.h>
boolean debug_state = false;
boolean debug_state = true;
/*
----------------------------------------------------
@ -30,9 +30,10 @@ volatile boolean cap_state = false;
volatile boolean endstop_state = false;
volatile int angle = 0;
const int cap_on_angle = 0;
const int cap_off_angle = 60;
const int cap_on_angle = 153;
const int cap_off_angle = 93;
volatile long timer = 0;
volatile int current_angle = 0;
const char cmd_cap_on = 'A';
const char cmd_cap_off = 'B';
@ -48,7 +49,7 @@ const int serialDelay = 5;
Servo servo;
//SG-5010 speed 0.18s / 60 degree
//converted to milliseconds/angle
const float servoSpeed = 180.0 / 60.0;
const float servoSpeed = 200.0 / 60.0;
void setup() {
Serial.begin(57600);
@ -108,14 +109,10 @@ void Pins_init () {
void Servo_init () {
servo.attach(PIN_SERVO);
delay(100);
servo.write(180);
delay(500);
servo.write(0);
delay(500);
if (!Read_endstop()) {
Cap_off(true);
/*if (!Read_endstop()) {
Cap_off(true);
}
}*/
}
boolean Read_endstop () {
@ -124,7 +121,7 @@ boolean Read_endstop () {
void Servo_angle (int newAngle) {
servo.write(newAngle);
delay(Servo_delay(newAngle, angle));
delay(Servo_delay(newAngle, angle) + 50);
angle = newAngle;
}
@ -134,7 +131,8 @@ int Servo_delay (int angleA, int angleB) {
}
void Cap_off (boolean suppress) {
if (cap_state) {
current_angle = servo.read();
if (cap_state || current_angle != cap_off_angle) {
Servo_angle(cap_off_angle);
cap_state = false;
} else {
@ -147,7 +145,8 @@ void Cap_off (boolean suppress) {
}
void Cap_on (boolean suppress) {
if (!cap_state) {
current_angle = servo.read();
if (!cap_state || current_angle != cap_on_angle) {
Servo_angle(cap_on_angle);
cap_state = true;
} else {
@ -163,4 +162,4 @@ void log (String msg) {
if (debug_state) {
Serial.println(msg);
}
}
}

View File

@ -11,8 +11,12 @@ LensY = 20;
CapOffsetX = -50;
CapOffsetY = -11;
CapLengthX = 50;
CapWidthZ = 4;
BoltSpacingX = 10;
BoltSpacingY = 49;
BoltD = 5;
module Mount () {
$fn = 200;
@ -27,11 +31,14 @@ module Mount () {
cylinder(r=R(LensVoidDiameter), h=LensY+1, center=true);
}
difference () {
translate([50, 0, -6]) cube([100, LensVoidDiameter + 30, 8], center = true);
translate([50, 0, -6]) cube([100, LensVoidDiameter + 30, 8], center=true);
cylinder(r=R(LensVoidDiameter), h=LensY+1, center=true);
translate([50, 0, -6]) {
cube([20, 40.25, 10], center = true);
translate([0, BoltSpacingY/2, 0])
translate([BoltSpacingX/2, BoltSpacingY/2, 0])cylinder(r=R(BoltD), h=20, center=true);
translate([-BoltSpacingX/2, BoltSpacingY/2, 0])cylinder(r=R(BoltD), h=20, center=true);
translate([BoltSpacingX/2, -BoltSpacingY/2, 0])cylinder(r=R(BoltD), h=20, center=true);
translate([-BoltSpacingX/2, -BoltSpacingY/2, 0])cylinder(r=R(BoltD), h=20, center=true);
}
}
}
@ -46,13 +53,34 @@ module Cap () {
union(){
translate([CapOffsetX,CapOffsetY,0]){
cylinder(r=R(LensVoidDiameter) + 4, h=4, center = true);
translate([35,(LensVoidDiameter/4)+1,0]) cube([50,R(LensVoidDiameter),4], center=true);
translate([35,(LensVoidDiameter/4)+1,0]) {
difference () {
cube([CapLengthX,R(LensVoidDiameter),CapWidthZ], center=true);
translate([R(CapLengthX)-(R(LensVoidDiameter)/2), 0, 0]) difference() {
cube([R(LensVoidDiameter),R(LensVoidDiameter), CapWidthZ+1], center=true);
cylinder(r=R(LensVoidDiameter)/2, h=CapWidthZ+1+1, center=true);
translate([-R(LensVoidDiameter)/2, 0, 0]) cube([R(LensVoidDiameter),R(LensVoidDiameter), CapWidthZ+1], center=true);
}
}
}
}
cylinder(r=5,h=10,center=true);
translate([0, 0, -4]) cylinder(r=5,h=4,center=true);
}
cylinder(r=2,h=10+1,center=true);
translate([0, 0, -4]) cylinder(r1=R(5.5), r2=R(5.4),h=4.01,center=true);
cylinder(r=R(5.4),h=10,center=true);
}
}
module Debug () {
Mount();
translate([-CapOffsetX,-CapOffsetY,0]) rotate([0,0,-60]) Cap();
}
Mount();
translate([-CapOffsetX,-CapOffsetY,0]) rotate([0,0,-60]) Cap();
Render="Debug";
if (Render=="Debug") {
Debug();
} else if (Render=="Cap") {
Cap();
} else if (Render=="Mount") {
Mount();
}

BIN
stl/capper_cap.stl Normal file

Binary file not shown.