Update to a dynamic bash file that can render all parts in a .scad file

scripts/scad.sh

@@ -1,45 +1,44 @@
 #!/bin/bash
 
+FILES=(
+	arri_s
+	bellows
+	cpc_connectors
+	mcopy_rails
+	mcopy_projector
+)
+
 openscadPart () {
 	openscad -o "./stl/${3}" -D"PART=\"${2}\"" "./scad/${1}"
+	echo "Compiled ${3} from ${1}"
 	if [ -f "./scad/common/c14n_stl.py" ]; then
 		python3 ./scad/common/c14n_stl.py "./stl/${3}"
 		echo "Normalized ${3}"
 	fi
 }
 
-# arri s parts
-if [[ "${1}" == "" ]] || [[ "${1}" == "arri_s" ]]; then
-	openscadPart "arri_s.scad" "drive_coupling_DC_connector" 	"arri_s_drive_coupling_DC_connector.stl"
-	openscadPart "arri_s.scad" "drive_coupling_DC" 				"arri_s_drive_coupling_DC.stl"
-	openscadPart "arri_s.scad" "animation_motor_DC_cap" 		"arri_s_animation_motor_DC_cap.stl"
-	openscadPart "arri_s.scad" "animation_motor_DC" 			"arri_s_animation_motor_DC.stl"
-	openscadPart "arri_s.scad" "animation_motor" 				"arri_s_animation_motor.stl"
-	openscadPart "arri_s.scad" "animation_motor_cap" 			"arri_s_animation_motor_cap.stl"
-	openscadPart "arri_s.scad" "drive_coupling" 				"arri_s_drive_coupling.stl"
-	openscadPart "arri_s.scad" "bellows_camera_board_adapter" 	"arri_s_bellows_camera_board_adapter.stl"
-	openscadPart "arri_s.scad" "bellows_camera_board" 			"arri_s_bellows_camera_board.stl"
+listParts () {
+	cat "${1}" | grep 'PART ==' | grep -v 'debug' | awk -F'"' '{print $2}'
+}
 
-	openscadPart "arri_s_mount.scad" "mount" "arri_s_mount.stl"
+allParts () {
+	PARTS=($(listParts "scad/${1}.scad"))
+	for part in "${PARTS[@]}"; do
+		echo opencadPart "${1}.scad" "${part}" "${1}_${part}.stl"
+	done
+}
+
+if [[ "${1}" == "all" ]]; then
+	for file in "${FILES[@]}"; do
+		allParts "${file}"
+	done
+else
+	if [ -f "scad/${1}.scad" ]; then
+		allParts "${1}"
+	elif [[ "${1}" != "" ]]; then
+		echo "File scad/${1}.scad not found"
+		exit 2
+	else
+		echo "Please provide a target to compile or use \"all\""
+	fi
 fi
-
-# mcopy mono 99 projector controller
-if [[ "${1}" == "" ]] || [[ "${1}" == "projector_controller" ]]; then
-	openscadPart "projector_controller.scad" "electronics_mount" "mcopy_mono99_electronics_mount.stl"
-fi
-
-# cpc connector
-if [[ "${1}" == "" ]] || [[ "${1}" == "cpc_connectors" ]]; then
-	openscadPart "cpc_connectors.scad" "cpc_9pin_plug" 			"cpc_connector_9pin_plug.stl" 
-	openscadPart "cpc_connectors.scad" "cpc_9pin_plug_collar" 	"cpc_connector_9pin_plug_collar.stl"
-	openscadPart "cpc_connectors.scad" "cpc_9pin_socket"		"cpc_connector_9pin_socket.stl"
-fi
-
-if [[ "${1}" == "" ]] || [[ "${1}" == "bellows" ]]; then
-	openscadPart "bellows.scad" "bellows_lens_board"            "bellows_lens_board.stl"
-	openscadPart "bellows.scad" "bellows_lens_board_magnetic"   "bellows_lens_board_magnetic.stl"
-	openscadPart "bellows.scad" "bellows_camera_board"          "bellows_camera_board.stl"
-	openscadPart "bellows.scad" "bellows_camera_board_magnetic" "bellows_camera_board_magnetic.stl"
-	openscadPart "bellows.scad" "camera_mount"                  "bellows_camera_mount.stl"
-	openscadPart "bellows.scad" "bellows_board_magnetic"        "bellows_board_magnetic.stl"
-fi