Arri-S work

scad/arri_s.scad

@@ -2,7 +2,7 @@
 
 include <./common.scad>;
 
-BarrelDiameter = 45.1;
+BarrelDiameter = 45;
 BarrelLength = 52;
 
 SeatDiameter = 20;
@@ -26,14 +26,25 @@ DriveLength = 7;
 DriveDiameter1 = 11;
 DriveDiameter2 = 9;
 
+ShaftLength = 2.75;
+ShaftDiameter = 5;
+
 module motorBarrel () {
     $fn = 200;
-    cylinder(r = BarrelDiameter / 2, r2 = (BarrelDiameter - 1) / 2, h = BarrelLength, center = true);
+    cylinder(r = R(BarrelDiameter), h = BarrelLength, center = true);
 }
 
 module motorSeat () {
     $fn = 120;
-    cylinder(r = SeatDiameter / 2, h = SeatLength, center = true);
+    cylinder(r = R(SeatDiameter), h = SeatLength, center = true);
+}
+
+module motorShaft () {
+    cylinder(r = R(ShaftDiameter), h = ShaftLength, center = true);
+}
+
+module motorDrive () {
+    cylinder(r = R(DriveDiameter1), h = DriveLength, center = true);
 }
 
 module motorOriginal () {
@@ -43,30 +54,104 @@ module motorOriginal () {
     $fn = 50;
     translate([BarrelDiameter / 2, 0, -(BarrelLength / 2) + NotchOffset]) {
         rotate([0, 90, 0]) {
-            cylinder(r = NotchDiameter / 2, h = 1, center = true);
+            cylinder(r = R(NotchDiameter), h = 1, center = true);
-            translate([0, 0, NotchDiameter / 4]) sphere(r = NotchDiameter / 2);
+            translate([0, 0, NotchDiameter / 4]) sphere(r = R(NotchDiameter));
         }
     }
+    translate([0, 0, (BarrelLength / 2) + (SeatLength) + (ShaftLength / 2)]) motorShaft();
+    translate([0, 0, (BarrelLength / 2) + (SeatLength) + (ShaftLength) + (DriveLength / 2)]) motorDrive();
 }
 
-module capBellowsAdapter () {
+module bodyCap () {
     $fn = 200;
     difference () {
-        cylinder(r = CapDiameter / 2, h = CapLength, center = true);
+        cylinder(r = R(CapDiameter), h = CapLength, center = true);
-        cylinder(r = (CapDiameter - CapThickness) / 2, h = CapLength + 1, center = true);
+        cylinder(r = R(CapDiameter - CapThickness), h = CapLength + 1, center = true);
         //catch
         translate([0, 0, (CapLength / 2) - CapCatchOffset]) difference () {
-            cylinder(r = (CapDiameter + 1) / 2, h = CapCatchLength, center = true);
+            cylinder(r = R(CapDiameter + 1), h = CapCatchLength, center = true);
-            cylinder(r = CapCatchDiameter / 2, h = CapCatchLength + 1, center = true);
+            cylinder(r = R(CapCatchDiameter), h = CapCatchLength + 1, center = true);
         }
     }
     translate([0, 0, (CapLength / 2) + (CapRimThickness / 2)]) {
         difference () {
-            cylinder(r = CapRimDiameter / 2, h = CapRimThickness, center = true);
+            cylinder(r = R(CapRimDiameter), h = CapRimThickness, center = true);
-            cube([CapDiameter - CapThickness - 12, CapDiameter - CapThickness - 12, CapRimThickness + 1], center = true);
         }
     }
 }
 
-//motorOriginal();
+module bodyCapBellowsAdapter () {
-capBellowsAdapter();
+    $fn = 200;
+    difference () {
+        bodyCap();
+        translate([0, 0, (CapLength / 2) + (CapRimThickness / 2)]) {
+        cube([CapDiameter - CapThickness - 12, CapDiameter - CapThickness - 12, CapRimThickness + 1], center = true);
+        }
+    }
+}
+
+module animationMotorBodyPositive () {
+    difference () {
+        motorBarrel();
+        //hollow out
+        translate([0, 0, 4]) cylinder(r = R(BarrelDiameter) - 5, h = BarrelLength, center = true, $fn = 200);
+        //cut
+        translate([0, 0, 20]) cube([100, 100, BarrelLength], center = true);
+        cylinder(r = R(23), h = BarrelLength + 1, center = true, $fn = 100);
+        translate([0, (BarrelDiameter / 2) - 2, -10]) cube([8, 8, 16], center = true);
+    }
+
+    //rim
+    translate([0, 0, -(BarrelLength / 2) - (3 / 2)]) {
+        difference () {
+            cylinder(r = R(BarrelDiameter) + 2, h = 3, center = true, $fn = 200);
+            cylinder(r = R(23), h = 3 + 1, center = true, $fn = 100);
+        }
+    }
+    //motor pad
+    translate([0, 0, -(BarrelLength / 2) - (3) - (4 / 2)]) {
+        difference () {
+            union () {
+                cube([42, 42, 4], center = true);
+                cylinder(r = R(BarrelDiameter) + 2, h = 4, center = true, $fn = 200);
+            }
+            cylinder(r = R(23), h = 4 + 1, center = true, $fn = 100);
+            for (i = [0 : 3]) {
+                rotate([0, 0, (i * 90) + 45]) translate([29.7, 0, 0]) cube([5.5, 5.5, 4 + 1], center = true);
+            }
+        }
+    }
+
+    //notch
+    $fn = 50;
+    rotate([0, 0, 35]) {
+        translate([BarrelDiameter / 2, 0, -(BarrelLength / 2) + NotchOffset]) {
+            rotate([0, 90, 0]) {
+                cylinder(r = R(NotchDiameter), h = 1, center = true);
+                translate([0, 0, NotchDiameter / 4]) sphere(r = R(NotchDiameter));
+            }
+        }
+    }
+}
+
+module boltSlot () {
+    cylinder(r = R(6), h = 40, center = true, $fn = 40);
+    cylinder(r = R(3.25), h = 50, center = true, $fn = 40);
+}
+
+module animationMotorBody () {
+    boltZOffset = -6;
+    difference () {
+        animationMotorBodyPositive();
+        translate([31/2, 31/2, boltZOffset]) boltSlot();
+        translate([31/2, -31/2, boltZOffset]) boltSlot();
+        translate([-31/2, 31/2, boltZOffset]) boltSlot();
+        translate([-31/2, -31/2, -6]) boltSlot();
+    }
+}
+
+//translate([0, 50, 0]) color("red") motorOriginal();
+//bodyCapBellowsAdapter();
+//animationMotorBody();
+//translate([0, 0, -49.5]) color("green") NEMA17();
+//bodyCap();

scad/common.scad

@@ -76,3 +76,29 @@ module optoswitch() {
  module hex (diag = 10, h = 1) {
     cylinder(r = diag / 2, h = h, center = true, $fn = 6);
 }
+
+//NEMA17 Stepper
+module NEMA17 ( H = 33 ) { //alt = 47.5
+    difference () {
+        cube([42, 42, H], center = true);
+        for (i = [0 : 3]) {
+            rotate([0, 0, (i * 90) + 45]) translate([29.7, 0, 0]) cube([5.5, 5.5, H + 1], center = true);
+        }
+        translate([31/2, 31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
+        translate([-31/2, 31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
+        translate([31/2, -31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
+        translate([-31/2, -31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
+    }
+    //pad
+    translate([0, 0, (H/2) + (1.9/2)]) {
+        cylinder(r = R(22), h = 1.9, center = true, $fn = 100);
+    }
+    //shaft
+    translate([0, 0, (H/2) + (22.75/2)]) {
+        difference () {
+            cylinder(r = R(5), h = 22.75, center = true, $fn = 30);
+            translate([0, 4.5, 4.7]) cube([5, 5, 22.75], center = true);
+        }
+        
+    } 
+}