Start progress on rack and pinion nub mover
This commit is contained in:
parent
b1c8192625
commit
06906eca42
|
|
@ -1,5 +1,5 @@
|
||||||
{
|
{
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"ext_port": 1111,
|
"ext_port": 1111,
|
||||||
"profiles": {
|
"profiles": {
|
||||||
"mcopy": {
|
"mcopy": {
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,6 @@
|
||||||
{
|
{
|
||||||
"name": "mcopy-app",
|
"name": "mcopy-app",
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"lockfileVersion": 2,
|
"lockfileVersion": 2,
|
||||||
"requires": true,
|
"requires": true,
|
||||||
"packages": {
|
"packages": {
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,6 @@
|
||||||
{
|
{
|
||||||
"name": "mcopy-app",
|
"name": "mcopy-app",
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"description": "GUI for the mcopy small gauge film optical printer platform",
|
"description": "GUI for the mcopy small gauge film optical printer platform",
|
||||||
"main": "main.js",
|
"main": "main.js",
|
||||||
"scripts": {
|
"scripts": {
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
{
|
{
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"ext_port": 1111,
|
"ext_port": 1111,
|
||||||
"profiles": {
|
"profiles": {
|
||||||
"mcopy": {
|
"mcopy": {
|
||||||
|
|
|
||||||
|
|
@ -1,12 +1,12 @@
|
||||||
{
|
{
|
||||||
"name": "mcopy",
|
"name": "mcopy",
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"lockfileVersion": 2,
|
"lockfileVersion": 2,
|
||||||
"requires": true,
|
"requires": true,
|
||||||
"packages": {
|
"packages": {
|
||||||
"": {
|
"": {
|
||||||
"name": "mcopy",
|
"name": "mcopy",
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"license": "MIT",
|
"license": "MIT",
|
||||||
"dependencies": {
|
"dependencies": {
|
||||||
"arduino": "file:app/lib/arduino",
|
"arduino": "file:app/lib/arduino",
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,6 @@
|
||||||
{
|
{
|
||||||
"name": "mcopy",
|
"name": "mcopy",
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"description": "Small gauge film optical printer platform",
|
"description": "Small gauge film optical printer platform",
|
||||||
"main": "build.js",
|
"main": "build.js",
|
||||||
"directories": {
|
"directories": {
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
{
|
{
|
||||||
"version": "1.8.35",
|
"version": "1.8.36",
|
||||||
"ext_port": 1111,
|
"ext_port": 1111,
|
||||||
"profiles": {
|
"profiles": {
|
||||||
"mcopy": {
|
"mcopy": {
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,7 @@
|
||||||
include <./common/common.scad>;
|
include <./common/common.scad>;
|
||||||
include <./common/motors.scad>;
|
include <./common/motors.scad>;
|
||||||
include <./common/2020_tslot.scad>;
|
include <./common/2020_tslot.scad>;
|
||||||
|
include <./rack_and_pinion.scad>;
|
||||||
|
|
||||||
PanelX = 89;
|
PanelX = 89;
|
||||||
PanelY = 125;
|
PanelY = 125;
|
||||||
|
|
@ -25,7 +26,7 @@ GateBoltX = (-PanelX / 2) + 54;
|
||||||
GateBoltY = 105 / 2;
|
GateBoltY = 105 / 2;
|
||||||
|
|
||||||
NubVoidD = 5.5;
|
NubVoidD = 5.5;
|
||||||
NubVoidX = 3.5;
|
NubVoidX = 7.5;
|
||||||
NubX = (-PanelX / 2) + 66;
|
NubX = (-PanelX / 2) + 66;
|
||||||
|
|
||||||
LEDD = 5.0;
|
LEDD = 5.0;
|
||||||
|
|
@ -185,6 +186,13 @@ module nub_void (pos = [0, 0, 0]) {
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
module nub_rails (pos = [0, 0, 0]) {
|
||||||
|
translate(pos) {
|
||||||
|
translate([0, 6, 0]) cube([30, 3, 5], center = true);
|
||||||
|
translate([0, -6, 0]) cube([30, 3, 5], center = true);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
module stepper_mount_block_positive (pos = [0, 0, 0], H) {
|
module stepper_mount_block_positive (pos = [0, 0, 0], H) {
|
||||||
translate(pos) difference() {
|
translate(pos) difference() {
|
||||||
cube([NEMA17OuterWidth, NEMA17OuterWidth, H], center = true);
|
cube([NEMA17OuterWidth, NEMA17OuterWidth, H], center = true);
|
||||||
|
|
@ -232,8 +240,8 @@ module stepper_mount_block (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
||||||
//bottom
|
//bottom
|
||||||
//LED_void([0, -17.25, 2.5], [0, 0, 45], true);
|
//LED_void([0, -17.25, 2.5], [0, 0, 45], true);
|
||||||
}
|
}
|
||||||
color("blue") LED_housing([0, -17.25, -4.5], [90, -90, 134], Void = true);
|
//color("blue") LED_housing([0, -17.25, -4.5], [90, -90, 134], Void = true);
|
||||||
color("blue") LED_housing([0, -17.25, -4.5], [-90, 90, 134], OffsetZ = -24.25, Void = true);
|
//color("blue") LED_housing([0, -17.25, -4.5], [-90, 90, 134], OffsetZ = -24.25, Void = true);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -374,12 +382,16 @@ module panel (pos = [0, 0, 0], rot = [0, 0, 0], Mounts = "2020") {
|
||||||
//
|
//
|
||||||
nub_void([NubX, 0, 0]);
|
nub_void([NubX, 0, 0]);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
nub_rails([28.25, 0, -5]);
|
||||||
|
servo_mount([33, 8, -45], [0, 90, 0]);
|
||||||
|
|
||||||
difference () {
|
difference () {
|
||||||
stepper_mount([0, 0, -(StepperMountZ / 2) - (PanelZ / 2)]);
|
stepper_mount([0, 0, -(StepperMountZ / 2) - (PanelZ / 2)]);
|
||||||
translate([GateBoltX, GateBoltY, -20]) hex(9.2, 50);
|
translate([GateBoltX, GateBoltY, -20]) hex(9.2, 50);
|
||||||
translate([GateBoltX, -GateBoltY, -20]) hex(9.2, 50);
|
translate([GateBoltX, -GateBoltY, -20]) hex(9.2, 50);
|
||||||
}
|
}
|
||||||
|
color("red") cube([30, 8.8, 10], center = true);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -420,27 +432,17 @@ module servo_mount_bolt_void (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
module servo_mount_old (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
//MG995
|
||||||
translate (pos) rotate (rot) {
|
|
||||||
difference () {
|
|
||||||
translate([1.5, 0, 0]) rotate([90, 0, 0]) rounded_cube([ServoX + 3, ServoZ+20, ServoY ], d = 4, center = true, $fn = 40);
|
|
||||||
cube([ServoVoidX, ServoY + 1, ServoZ + 1], center = true);
|
|
||||||
translate([0, ServoY - 1, 0]) cube([ServoX + 1, ServoY, 1], center = true);
|
|
||||||
|
|
||||||
servo_mount_bolt_void ([ServoSpaceX / 2, 0, ServoSpaceZ / 2], [90, 90, 0]);
|
|
||||||
servo_mount_bolt_void([-ServoSpaceX / 2, 0, ServoSpaceZ / 2], [90, 90, 0]);
|
|
||||||
servo_mount_bolt_void ([ServoSpaceX / 2, 0, -ServoSpaceZ / 2], [90, 90, 0]);
|
|
||||||
servo_mount_bolt_void ([-ServoSpaceX / 2, 0, -ServoSpaceZ / 2], [90, 90, 0]);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
//debug
|
|
||||||
//translate([(55 / 2)-17.5, 0, 0]) sphere(r = 6 / 2, $fn = 60);
|
|
||||||
}
|
|
||||||
|
|
||||||
module servo_mount (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
module servo_mount (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
||||||
translate (pos) rotate (rot) {
|
translate (pos) rotate (rot) {
|
||||||
//difference () {
|
difference () {
|
||||||
//translate([1.5, 0, 0]) rotate([90, 0, 0]) rounded_cube([ServoX + 3, ServoZ+20, ServoY ], d = 4, center = true, $fn = 40);
|
union () {
|
||||||
|
translate([1.5, 0, 0]) rotate([90, 0, 0]) rounded_cube([ServoX + 3, ServoZ+10, ServoY ], d = 4, center = true, $fn = 40);
|
||||||
|
difference () {
|
||||||
|
translate([-34, 0, 0]) cube([17, ServoY, ServoZ + 10 ], center = true, $fn = 40);
|
||||||
|
translate([-19, 0, 0]) cube([17, ServoY + 1, 20 ], center = true, $fn = 40);
|
||||||
|
}
|
||||||
|
}
|
||||||
cube([ServoVoidX, ServoY + 1, ServoZ + 1], center = true);
|
cube([ServoVoidX, ServoY + 1, ServoZ + 1], center = true);
|
||||||
translate([0, ServoY - 1, 0]) cube([ServoX + 1, ServoY, 1], center = true);
|
translate([0, ServoY - 1, 0]) cube([ServoX + 1, ServoY, 1], center = true);
|
||||||
|
|
||||||
|
|
@ -448,7 +450,15 @@ module servo_mount (pos = [0, 0, 0], rot = [0, 0, 0]) {
|
||||||
translate([-ServoSpaceX / 2, 0, ServoSpaceZ / 2]) rotate([90, 90, 0]) cylinder(r = R(ServoBoltD), h = ServoY + 1, center = true, $fn = 60);
|
translate([-ServoSpaceX / 2, 0, ServoSpaceZ / 2]) rotate([90, 90, 0]) cylinder(r = R(ServoBoltD), h = ServoY + 1, center = true, $fn = 60);
|
||||||
translate([ServoSpaceX / 2, 0, -ServoSpaceZ / 2]) rotate([90, 90, 0]) cylinder(r = R(ServoBoltD), h = ServoY + 1, center = true, $fn = 60);
|
translate([ServoSpaceX / 2, 0, -ServoSpaceZ / 2]) rotate([90, 90, 0]) cylinder(r = R(ServoBoltD), h = ServoY + 1, center = true, $fn = 60);
|
||||||
translate([-ServoSpaceX / 2, 0, -ServoSpaceZ / 2]) rotate([90, 90, 0]) cylinder(r = R(ServoBoltD), h = ServoY + 1, center = true, $fn = 60);
|
translate([-ServoSpaceX / 2, 0, -ServoSpaceZ / 2]) rotate([90, 90, 0]) cylinder(r = R(ServoBoltD), h = ServoY + 1, center = true, $fn = 60);
|
||||||
//}
|
|
||||||
|
//void for motor
|
||||||
|
translate([0, 7.5, -15]) rotate([45, 0, 0]) cube([ServoX+20, 10, 10], center = true);
|
||||||
|
//cut off end
|
||||||
|
translate([0, 0, 15.4]) cube([ServoX+30, 10, 10], center = true);
|
||||||
|
//cut off top
|
||||||
|
translate([30, 0, 0]) cube([20, 10, 40], center = true);
|
||||||
|
}
|
||||||
|
|
||||||
}
|
}
|
||||||
//debug
|
//debug
|
||||||
//translate([(55 / 2)-17.5, 0, 0]) sphere(r = 6 / 2, $fn = 60);
|
//translate([(55 / 2)-17.5, 0, 0]) sphere(r = 6 / 2, $fn = 60);
|
||||||
|
|
@ -462,23 +472,25 @@ module debug () {
|
||||||
//panel();
|
//panel();
|
||||||
//NEMA17([0, KeyDistance / 2, -50]);
|
//NEMA17([0, KeyDistance / 2, -50]);
|
||||||
//NEMA17([0, -KeyDistance / 2, -50]);
|
//NEMA17([0, -KeyDistance / 2, -50]);
|
||||||
gate_key([0, KeyDistance / 2, -14], [0, 0, -90 + 45], KeyRot=90);
|
//gate_key([0, KeyDistance / 2, -14], [0, 0, -90 + 45], KeyRot=90);
|
||||||
gate_key([0, -KeyDistance / 2, -14], [0, 0, 180 + 45 ]);
|
//gate_key([0, -KeyDistance / 2, -14], [0, 0, 180 + 45 ]);
|
||||||
|
|
||||||
difference () {
|
difference () {
|
||||||
union () {
|
union () {
|
||||||
intersection () {
|
intersection () {
|
||||||
panel();
|
panel();
|
||||||
|
//one mount
|
||||||
//translate([0, -50, 0]) cube([60, 100, 150], center = true);
|
//translate([0, -50, 0]) cube([60, 100, 150], center = true);
|
||||||
|
//
|
||||||
|
translate([35, 5, 0]) cube([60, 25, 150], center = true);
|
||||||
}
|
}
|
||||||
|
|
||||||
}
|
}
|
||||||
//translate([50, 0, 0]) rotate([0, 0, 45]) cube([100, 250, 150], center = true);
|
//translate([50, 0, 0]) rotate([0, 0, 45]) cube([100, 250, 150], center = true);
|
||||||
//translate([0, 0, -82.5 - 10]) cube([100, 250, 150], center = true);
|
//translate([0, 0, -82.5 - 10]) cube([100, 250, 150], center = true);
|
||||||
}
|
}
|
||||||
color("red") translate([(-PanelX / 2) + 10, 0, (-PanelZ / 2) -10]) rotate([90, 0, 0]) 2020_tslot(PanelY);
|
//color("red") translate([(-PanelX / 2) + 10, 0, (-PanelZ / 2) -10]) rotate([90, 0, 0]) 2020_tslot(PanelY);
|
||||||
orbital_mount([(-PanelX / 2) - 4.5, 0, 40], [0, 90, 0]);
|
//orbital_mount([(-PanelX / 2) - 4.5, 0, 40], [0, 90, 0]);
|
||||||
color("green") servo_mount([40, 0, -30], [90, 0, 0]);
|
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,338 @@
|
||||||
|
//This is a modification of " Public Domain Parametric Involute Spur Gear (and involute helical gear and involute rack)
|
||||||
|
// by Leemon Baird, 2011, Leemon@Leemon.com
|
||||||
|
//http://www.thingiverse.com/thing:5505 "
|
||||||
|
|
||||||
|
//Modifications by racatack June 2016:
|
||||||
|
// v1.0, 6/24/16:
|
||||||
|
// -Incorporated 'module InvoluteGear_rack()' from the 11/11/15 comment by quisam2342 in thing:5505 to fix noted problems in rack generation at various tooth sizes
|
||||||
|
// -Added a section for an optional 'backboard' that can be used to stiffen an otherwise skinny rack
|
||||||
|
// -Added sections for optional Stop Blocks at either or both ends of a rack
|
||||||
|
// -Removed extra gears from the example since I only need one pinion. See thing:5505 example section to gain more insight into gear generation.
|
||||||
|
//v1.1, 6/28/16:
|
||||||
|
// -Added sections to optionally create mounting flanges on the bottom/backside of the rack. Flanges can be at either or both ends, or longitudinal.
|
||||||
|
|
||||||
|
//TO GENERATE A CUSTOM RACK AND PINION ENTER INPUTS AT LINES 345-377
|
||||||
|
|
||||||
|
|
||||||
|
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// Public Domain Parametric Involute Spur Gear (and involute helical gear and involute rack)
|
||||||
|
// version 1.1
|
||||||
|
// by Leemon Baird, 2011, Leemon@Leemon.com
|
||||||
|
//http://www.thingiverse.com/thing:5505
|
||||||
|
//
|
||||||
|
// This file is public domain. Use it for any purpose, including commercial
|
||||||
|
// applications. Attribution would be nice, but is not required. There is
|
||||||
|
// no warranty of any kind, including its correctness, usefulness, or safety.
|
||||||
|
//
|
||||||
|
// This is parameterized involute spur (or helical) gear. It is much simpler and less powerful than
|
||||||
|
// others on Thingiverse. But it is public domain. I implemented it from scratch from the
|
||||||
|
// descriptions and equations on Wikipedia and the web, using Mathematica for calculations and testing,
|
||||||
|
// and I now release it into the public domain.
|
||||||
|
//
|
||||||
|
// http://en.wikipedia.org/wiki/Involute_gear
|
||||||
|
// http://en.wikipedia.org/wiki/Gear
|
||||||
|
// http://en.wikipedia.org/wiki/List_of_gear_nomenclature
|
||||||
|
// http://gtrebaol.free.fr/doc/catia/spur_gear.html
|
||||||
|
// http://www.cs.cmu.edu/~rapidproto/mechanisms/chpt7.html
|
||||||
|
//
|
||||||
|
// The module gear() gives an involute spur gear, with reasonable defaults for all the parameters.
|
||||||
|
// Normally, you should just choose the first 4 parameters, and let the rest be default values.
|
||||||
|
// The module gear() gives a gear in the XY plane, centered on the origin, with one tooth centered on
|
||||||
|
// the positive Y axis. The various functions below it take the same parameters, and return various
|
||||||
|
// measurements for the gear. The most important is pitch_radius, which tells how far apart to space
|
||||||
|
// gears that are meshing, and adendum_radius, which gives the size of the region filled by the gear.
|
||||||
|
// A gear has a "pitch circle", which is an invisible circle that cuts through the middle of each
|
||||||
|
// tooth (though not the exact center). In order for two gears to mesh, their pitch circles should
|
||||||
|
// just touch. So the distance between their centers should be pitch_radius() for one, plus pitch_radius()
|
||||||
|
// for the other, which gives the radii of their pitch circles.
|
||||||
|
//
|
||||||
|
// In order for two gears to mesh, they must have the same mm_per_tooth and pressure_angle parameters.
|
||||||
|
// mm_per_tooth gives the number of millimeters of arc around the pitch circle covered by one tooth and one
|
||||||
|
// space between teeth. The pitch angle controls how flat or bulged the sides of the teeth are. Common
|
||||||
|
// values include 14.5 degrees and 20 degrees, and occasionally 25. Though I've seen 28 recommended for
|
||||||
|
// plastic gears. Larger numbers bulge out more, giving stronger teeth, so 28 degrees is the default here.
|
||||||
|
//
|
||||||
|
// The ratio of number_of_teeth for two meshing gears gives how many times one will make a full
|
||||||
|
// revolution when the the other makes one full revolution. If the two numbers are coprime (i.e.
|
||||||
|
// are not both divisible by the same number greater than 1), then every tooth on one gear
|
||||||
|
// will meet every tooth on the other, for more even wear. So coprime numbers of teeth are good.
|
||||||
|
//
|
||||||
|
// The module rack() gives a rack, which is a bar with teeth. A rack can mesh with any
|
||||||
|
// gear that has the same mm_per_tooth and pressure_angle.
|
||||||
|
//
|
||||||
|
// Some terminology:
|
||||||
|
// The outline of a gear is a smooth circle (the "pitch circle") which has mountains and valleys
|
||||||
|
// added so it is toothed. So there is an inner circle (the "root circle") that touches the
|
||||||
|
// base of all the teeth, an outer circle that touches the tips of all the teeth,
|
||||||
|
// and the invisible pitch circle in between them. There is also a "base circle", which can be smaller than
|
||||||
|
// all three of the others, which controls the shape of the teeth. The side of each tooth lies on the path
|
||||||
|
// that the end of a string would follow if it were wrapped tightly around the base circle, then slowly unwound.
|
||||||
|
// That shape is an "involute", which gives this type of gear its name.
|
||||||
|
//
|
||||||
|
//////////////////////////////////////////////////////////////////////////////////////////////
|
||||||
|
|
||||||
|
//An involute spur gear, with reasonable defaults for all the parameters.
|
||||||
|
//Normally, you should just choose the first 4 parameters, and let the rest be default values.
|
||||||
|
//Meshing gears must match in mm_per_tooth, pressure_angle, and twist,
|
||||||
|
//and be separated by the sum of their pitch radii, which can be found with pitch_radius().
|
||||||
|
module gear (
|
||||||
|
mm_per_tooth = 3, //this is the "circular pitch", the circumference of the pitch circle divided by the number of teeth
|
||||||
|
number_of_teeth = 11, //total number of teeth around the entire perimeter
|
||||||
|
thickness = 6, //thickness of gear in mm
|
||||||
|
hole_diameter = 3, //diameter of the hole in the center, in mm
|
||||||
|
twist = 0, //teeth rotate this many degrees from bottom of gear to top. 360 makes the gear a screw with each thread going around once
|
||||||
|
teeth_to_hide = 0, //number of teeth to delete to make this only a fraction of a circle
|
||||||
|
pressure_angle = 28, //Controls how straight or bulged the tooth sides are. In degrees.
|
||||||
|
clearance = 0.0, //gap between top of a tooth on one gear and bottom of valley on a meshing gear (in millimeters)
|
||||||
|
backlash = 0.0 //gap between two meshing teeth, in the direction along the circumference of the pitch circle
|
||||||
|
) {
|
||||||
|
assign(pi = 3.1415926)
|
||||||
|
assign(p = mm_per_tooth * number_of_teeth / pi / 2) //radius of pitch circle
|
||||||
|
assign(c = p + mm_per_tooth / pi - clearance) //radius of outer circle
|
||||||
|
assign(b = p*cos(pressure_angle)) //radius of base circle
|
||||||
|
assign(r = p-(c-p)-clearance) //radius of root circle
|
||||||
|
assign(t = mm_per_tooth/2-backlash/2) //tooth thickness at pitch circle
|
||||||
|
assign(k = -iang(b, p) - t/2/p/pi*180) { //angle to where involute meets base circle on each side of tooth
|
||||||
|
difference() {
|
||||||
|
for (i = [0:number_of_teeth-teeth_to_hide-1] )
|
||||||
|
rotate([0,0,i*360/number_of_teeth])
|
||||||
|
linear_extrude(height = thickness, center = true, convexity = 10, twist = twist)
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[0, -hole_diameter/10],
|
||||||
|
polar(r, -181/number_of_teeth),
|
||||||
|
polar(r, r<b ? k : -180/number_of_teeth),
|
||||||
|
q7(0/5,r,b,c,k, 1),q7(1/5,r,b,c,k, 1),q7(2/5,r,b,c,k, 1),q7(3/5,r,b,c,k, 1),q7(4/5,r,b,c,k, 1),q7(5/5,r,b,c,k, 1),
|
||||||
|
q7(5/5,r,b,c,k,-1),q7(4/5,r,b,c,k,-1),q7(3/5,r,b,c,k,-1),q7(2/5,r,b,c,k,-1),q7(1/5,r,b,c,k,-1),q7(0/5,r,b,c,k,-1),
|
||||||
|
polar(r, r<b ? -k : 180/number_of_teeth),
|
||||||
|
polar(r, 181/number_of_teeth)
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16]]
|
||||||
|
);
|
||||||
|
cylinder(h=2*thickness+1, r=hole_diameter/2, center=true, $fn=20);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
};
|
||||||
|
//these 4 functions are used by gear
|
||||||
|
function polar(r,theta) = r*[sin(theta), cos(theta)]; //convert polar to cartesian coordinates
|
||||||
|
function iang(r1,r2) = sqrt((r2/r1)*(r2/r1) - 1)/3.1415926*180 - acos(r1/r2); //unwind a string this many degrees to go from radius r1 to radius r2
|
||||||
|
function q7(f,r,b,r2,t,s) = q6(b,s,t,(1-f)*max(b,r)+f*r2); //radius a fraction f up the curved side of the tooth
|
||||||
|
function q6(b,s,t,d) = polar(d,s*(iang(b,d)+t)); //point at radius d on the involute curve
|
||||||
|
|
||||||
|
//a rack, which is a straight line with teeth (the same as a segment from a giant gear with a huge number of teeth).
|
||||||
|
//The "pitch circle" is a line along the X axis.
|
||||||
|
//module rack (
|
||||||
|
// mm_per_tooth = 3, //this is the "circular pitch", the circumference of the pitch circle divided by the number //of teeth
|
||||||
|
// number_of_teeth = 11, //total number of teeth along the rack
|
||||||
|
// thickness = 6, //thickness of rack in mm (affects each tooth)
|
||||||
|
// height = 120, //height of rack in mm, from tooth top to far side of rack.
|
||||||
|
// pressure_angle = 28, //Controls how straight or bulged the tooth sides are. In degrees.
|
||||||
|
// backlash = 0.0 //gap between two meshing teeth, in the direction along the circumference of the pitch circle
|
||||||
|
//) {
|
||||||
|
// assign(pi = 3.1415926)
|
||||||
|
// assign(a = mm_per_tooth / pi) //addendum
|
||||||
|
// assign(t = a*cos(pressure_angle)-1) //tooth side is tilted so top/bottom corners move this amount
|
||||||
|
// for (i = [0:number_of_teeth-1] )
|
||||||
|
// translate([i*mm_per_tooth,0,0])
|
||||||
|
// linear_extrude(height = thickness, center = true, convexity = 10)
|
||||||
|
// polygon(
|
||||||
|
// points=[
|
||||||
|
// [-mm_per_tooth * 3/4, a-height],
|
||||||
|
// [-mm_per_tooth * 3/4 - backlash, -a],
|
||||||
|
// [-mm_per_tooth * 1/4 + backlash - t, -a],
|
||||||
|
// [-mm_per_tooth * 1/4 + backlash + t, a],
|
||||||
|
// [ mm_per_tooth * 1/4 - backlash - t, a],
|
||||||
|
// [ mm_per_tooth * 1/4 - backlash + t, -a],
|
||||||
|
// [ mm_per_tooth * 3/4 + backlash, -a],
|
||||||
|
// [ mm_per_tooth * 3/4, a-height],
|
||||||
|
// ],
|
||||||
|
// paths=[[0,1,2,3,4,5,6,7]]
|
||||||
|
// );
|
||||||
|
//};
|
||||||
|
|
||||||
|
|
||||||
|
//rac note - This section generates the rack body and teeth. It is from the 11/11/15 comment by quisam2342 in thing:5505 to fix noted problems with rack generation, and replaces the original 'module rack()'
|
||||||
|
////////////////////////////////////////////////////////////////////////////////////////////////
|
||||||
|
// The module InvoluteGear_rack() gives a involute gear rack, which is a bar with teeth.
|
||||||
|
// A rack can mesh with any gear that has the same mm_per_tooth and pressure_angle.
|
||||||
|
// The "pitch circle" is a line along the X axis.
|
||||||
|
//
|
||||||
|
// mm_per_tooth this is the "circular pitch", the circumference of the pitch circle
|
||||||
|
// divided by the number of teeth
|
||||||
|
//
|
||||||
|
// number_of_teeth total number of teeth along the rack
|
||||||
|
//
|
||||||
|
// thickness thickness of rack in mm
|
||||||
|
//
|
||||||
|
// height height of rack in mm, from tooth top to far side of rack
|
||||||
|
//
|
||||||
|
// pressure_angle controls how straight or bulged the tooth sides are, in degrees
|
||||||
|
//
|
||||||
|
// clearance gap between top of a tooth on one gear and bottom of valley
|
||||||
|
// on a meshing gear, in millimeters
|
||||||
|
//
|
||||||
|
// backlash gap between two meshing teeth, in the direction along the circumference
|
||||||
|
// of the pitch circle
|
||||||
|
////////////////////////////////////////////////////////////////////////////////////////////////
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
module InvoluteGear_rack (
|
||||||
|
|
||||||
|
//Default numbers in this section get overridden by numbers in 'example rack and pinion' section, so set your values there.
|
||||||
|
|
||||||
|
mm_per_tooth = 3, //all meshing gears need the same mm_per_tooth
|
||||||
|
number_of_teeth = 11,
|
||||||
|
thickness = 6,
|
||||||
|
height = 4,
|
||||||
|
|
||||||
|
//rac - Added variables for backboard, stop blocks and mounting flanges:
|
||||||
|
//set your values in the 'example rack and pinion' section, as defaults given here will be overridden by that section
|
||||||
|
backboard_thickness = 2.0,
|
||||||
|
backboard_height = 1.0,
|
||||||
|
side_flange_thickness = 0,
|
||||||
|
side_flange_height = 0,
|
||||||
|
flange_offset = 0,
|
||||||
|
stop_height = backboard_height,
|
||||||
|
left_stop_enable = 1,
|
||||||
|
right_stop_enable = 1,
|
||||||
|
flange_height = 0,
|
||||||
|
left_flange_enable = 1,
|
||||||
|
right_flange_enable = 1,
|
||||||
|
|
||||||
|
//These defaults are not redefined in the example section:
|
||||||
|
pressure_angle = 28, //all meshing gears need the same pressure_angle
|
||||||
|
clearance = 0.0,
|
||||||
|
backlash = 0.0
|
||||||
|
|
||||||
|
)
|
||||||
|
|
||||||
|
{
|
||||||
|
// addendum - tooth height above pitch line
|
||||||
|
assign(addendum = module_value(mm_per_tooth) - clearance)
|
||||||
|
|
||||||
|
// dedendum - tooth height below pitch line
|
||||||
|
assign(dedendum = 1.25 * module_value(mm_per_tooth) )
|
||||||
|
|
||||||
|
|
||||||
|
for (i = [0:number_of_teeth-1] )
|
||||||
|
translate([(i+0.5)*mm_per_tooth,height-addendum,0])
|
||||||
|
linear_extrude(height = thickness, center = true, convexity = 10) //'height' parameter here is not the same as 'height' parameter of module. Here it effectively is the width or thickness as the rack is extruded from one side-face to the other.
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[-1/2 * mm_per_tooth, addendum-height],
|
||||||
|
[-1/2 * mm_per_tooth, -dedendum],
|
||||||
|
[-1/4 * mm_per_tooth + backlash - dedendum * tan(pressure_angle), -dedendum],
|
||||||
|
[-1/4 * mm_per_tooth + backlash + addendum * tan(pressure_angle), addendum],
|
||||||
|
[ 1/4 * mm_per_tooth - backlash - addendum * tan(pressure_angle), addendum],
|
||||||
|
[ 1/4 * mm_per_tooth - backlash + dedendum * tan(pressure_angle), -dedendum],
|
||||||
|
[ 1/2 * mm_per_tooth, -dedendum],
|
||||||
|
[ 1/2 * mm_per_tooth, addendum-height],
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3,4,5,6,7]]
|
||||||
|
);
|
||||||
|
|
||||||
|
//rac -added - This section optionally creates a 'stop block' at the left end of the rack
|
||||||
|
translate([(-0.11)*mm_per_tooth,0,0.5*(-thickness)])
|
||||||
|
linear_extrude(height = left_stop_enable*thickness, center = false, convexity = 10)
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[-1/2 * mm_per_tooth,height+stop_height], //stop_height extends stop block above teeth, change the number to change the extension amount
|
||||||
|
[-1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,height+stop_height], //stop_height extends stop block above teeth, change the number to change the extension amount
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3]]
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
//rac -added - This section optionally creates a 'stop block' at the right end of the rack
|
||||||
|
translate([(0.11+number_of_teeth)*mm_per_tooth,0,0.5*(-thickness)])
|
||||||
|
linear_extrude(height = right_stop_enable*thickness, center = false, convexity = 10)
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[-1/2 * mm_per_tooth,height+stop_height], //stop_height extends stop block above teeth
|
||||||
|
[-1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,height+stop_height], //stop_height extends stop block above teeth
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3]]
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
//rac -added - This section optionally creates a flange at the left rear of the rack
|
||||||
|
translate([(-0.11)*mm_per_tooth,0,0.5*(-thickness)])
|
||||||
|
linear_extrude(height = left_flange_enable*thickness, center = false, convexity = 10)
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[-1/2 * mm_per_tooth,-flange_height], //flange_height extends flange beyond rack bottom
|
||||||
|
[-1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,-flange_height], //flange_height extends flange beyond rack bottom
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3]]
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
//rac -added - This section optionally creates a flange at the right rear of the rack
|
||||||
|
translate([(0.11+number_of_teeth)*mm_per_tooth,0,0.5*(-thickness)])
|
||||||
|
linear_extrude(height = right_flange_enable*thickness, center = false, convexity = 10)
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[-1/2 * mm_per_tooth,-flange_height], //flange_height extends flange beyond rack bottom
|
||||||
|
[-1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,-flange_height], //flange_height extends flange beyond rack bottom
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3]]
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
//rac -added - This section optionally creates a 'Backboard' on one side of the rack. Can be used to add stiffness for a 'thin' rack (i.e. a rack with low height and/or thickness numbers) or if a large negative height is used it can extend under the rack as a mounting flange.
|
||||||
|
for (i = [0:number_of_teeth-1] )
|
||||||
|
translate([(i+0.5)*mm_per_tooth,0,0.5*(-thickness+backboard_thickness)])
|
||||||
|
//0.5*(-thickness+backboard_thickness) starts the backboard at one side of the rack and extrudes it inward
|
||||||
|
linear_extrude(height = backboard_thickness, center = true, convexity = 10)
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[-1/2 * mm_per_tooth,height+backboard_height], //backboard_height extends backboard above teeth
|
||||||
|
[-1/2 * mm_per_tooth,0],
|
||||||
|
|
||||||
|
[ 1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,height+backboard_height], //backboard_height extends backboard above teeth
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3]]
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
//rac -added - This section optionally creates a Rear Side-Flange on along one side of the rack. Can be used to add stiffness for a 'thin' rack (i.e. a rack with low height and/or thickness numbers) or it can be used as a mounting flange.
|
||||||
|
for (i = [0:number_of_teeth-1] )
|
||||||
|
translate([(i+0.5)*mm_per_tooth,0,0.5*(-thickness+side_flange_thickness)+flange_offset])
|
||||||
|
//0.5*(-side_flange_thickness) starts the backboard at one side of the rack and extrudes it inward. flange_offset moves the flange toward the other side of the rack
|
||||||
|
linear_extrude(height = side_flange_thickness, center = true, convexity = 10)
|
||||||
|
polygon(
|
||||||
|
points=[
|
||||||
|
[-1/2 * mm_per_tooth,-side_flange_height], //side_flange_height extends side_flange beyond rack bottom
|
||||||
|
[-1/2 * mm_per_tooth,0],
|
||||||
|
|
||||||
|
[ 1/2 * mm_per_tooth,0],
|
||||||
|
[ 1/2 * mm_per_tooth,-side_flange_height], //side_flange_height extends backboard beyond rack bottom
|
||||||
|
],
|
||||||
|
paths=[[0,1,2,3]]
|
||||||
|
);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
//These 5 functions let the user find the derived dimensions of the gear.
|
||||||
|
//A gear fits within a circle of radius outer_radius, and two gears should have
|
||||||
|
//their centers separated by the sum of their pictch_radius.
|
||||||
|
function circular_pitch (mm_per_tooth=3) = mm_per_tooth; //tooth density expressed as "circular pitch" in millimeters
|
||||||
|
function diametral_pitch (mm_per_tooth=3) = 3.1415926 / mm_per_tooth; //tooth density expressed as "diametral pitch" in teeth per millimeter
|
||||||
|
function module_value (mm_per_tooth=3) = mm_per_tooth / 3.1415926; //tooth density expressed as "module" or "modulus" in millimeters
|
||||||
|
function pitch_radius (mm_per_tooth=3,number_of_teeth=11) = mm_per_tooth * number_of_teeth / 3.1415926 / 2;
|
||||||
|
function outer_radius (mm_per_tooth=3,number_of_teeth=11,clearance=0.1) //The gear fits entirely within a cylinder of this radius.
|
||||||
|
= mm_per_tooth*(1+number_of_teeth/2)/3.1415926 - clearance;
|
||||||
|
|
||||||
Loading…
Reference in New Issue