mcopy/scad/jk_projector.scad

51 lines
1.3 KiB
OpenSCAD
Raw Normal View History

2020-07-01 22:04:17 +00:00
module gear () {
//GEAR PINION
OD = 7;
ID = 5;
H = 7;
TEETH = 12;
TOOTH_W = .9;
//center
cylinder(r = ID / 2, h = 7, center = true, $fn = 60);
for (i = [0 : TEETH - 1]) {
rotate([0, 0, i * (360 / TEETH)]) translate([0, 2.9, 0]) cube([TOOTH_W, 1.1, H], center = true);
}
}
module notched_shaft (H = 10) {
D = 5;
difference () {
cylinder(r = D / 2, h = H, center = true, $fn = 50);
translate([4, 0, 0]) cube([D, D, H + 1], center = true);
}
}
module notched_roller () {
D = 37.75;
D2 = 34.5;
H = 3.5;
H2 = 14.5;
difference () {
union () {
difference () {
cylinder(r = D / 2, h = H, $fn = 180, center = true);
translate([D / 2, 0, 0]) scale([1, 2, 1]) rotate([0, 0, 45]) cube([2, 2, H + 1], center = true);
}
translate([0, 0, -(H / 2) - (H2 / 2)]) cylinder(r = D2 / 2, h = H2, $fn = 180, center = true);
}
for (i = [0 : 2]) {
rotate([0, 0, i * (360 / 3)]) translate([D / 4, 0, 0]) cylinder(r = 6 / 2, h = H2 * 4, $fn = 80, center = true);
}
translate([0, 0, -H - (H2 / 2) - 1]) rotate([0, 0, 60]) notched_shaft();
}
}
PART = "gear";
if (PART == "gear") {
translate([0, 0, 5]) gear();
notched_roller();
}