mcopy/scad/jk_camera_controller_mod.scad

112 lines
3.8 KiB
OpenSCAD
Raw Normal View History

2020-07-01 22:03:40 +00:00
module rounded_cube (c, d) {
r = d / 2;
scaled = [c[0] - d, c[1] - d, c[2] - d];
minkowski() {
sphere(r = r);
cube(scaled, center = true);
}
}
module case () {
$fn = 100;
X = 75+1;
Y = 65+1;
Z = 35+1;
MOUNT_X = 44.5;
MOUNT_Y = 33.5;
MOUNT_Z1 = 4.5;
MOUNT_Z2 = 3;
MOUNT_D1 = 5;
MOUNT_D2 = 2.5;
MOUNT_OFFSET_X = 11;
MOUNT_OFFSET_Y = 2;
MOUNT_OFFSET_Z = 13.5;
PLUG_D1 = 15.75;
PLUG_D2 = 20;
PLUG_Z = -2;
PLUG_OFFSET_X = -23;
M5 = 5.75;
difference () {
rounded_cube([X, Y, Z], d = 8);
//inner void
rounded_cube([X - 7, Y - 7, Z - 7], d = 5);
//top
translate([0, 0, -Z + 4]) cube([X + 1, Y + 1, Z], center = true);
//
translate([PLUG_OFFSET_X, 0, 10]) cylinder(r = PLUG_D1 / 2, h = 20, center = true);
translate([PLUG_OFFSET_X, 0, 5 - PLUG_Z]) cylinder(r = PLUG_D2 / 2, h = 20, center = true);
//m5
translate([PLUG_OFFSET_X + 6, 20, 10]) cylinder(r = M5 / 2, h = 50, center = true);
translate([PLUG_OFFSET_X + 6, -20, 10]) cylinder(r = M5 / 2, h = 50, center = true);
}
translate([MOUNT_OFFSET_X, MOUNT_OFFSET_Y, 0]) rotate([0, 0, 90]) {
translate ([(MOUNT_X / 2), MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
}
translate ([-(MOUNT_X / 2), MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
}
translate ([(MOUNT_X / 2), -MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
}
translate ([-(MOUNT_X / 2), -MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
}
}
//m5
translate([PLUG_OFFSET_X + 6, 20, 2]) difference () {
union () {
cylinder(r = 9 / 2, h = Z - 5, center = true);
translate([0, 0, Z / 2 - 6]) cylinder(r = 12 / 2, h = 6, center = true);
}
cylinder(r = M5 / 2, h = 50, center = true);
}
translate([PLUG_OFFSET_X + 6, -20, 2]) difference () {
union () {
cylinder(r = 9 / 2, h = Z - 5, center = true);
translate([0, 0, Z / 2 - 6]) cylinder(r = 12 / 2, h = 6, center = true);
}
cylinder(r = M5 / 2, h = 50, center = true);
}
translate([-(X / 2) + 4, Y / 5 , (Z / 2) - 5]) {
rotate([90, 0, 0]) cylinder(r = 3, h = 10, center = true);
}
translate([-(X / 2) + 4, -Y / 5 , (Z / 2) - 4]) {
rotate([90, 0, 0]) cylinder(r = 3, h = 10, center = true);
}
/*translate ([(X / 2) + 5, 0, -9.5]) difference () {
rounded_cube([15, 15, 5], d = 2);
translate([0, 0, -4]) cube([15, 15, 5], center = true);
translate([2, 0, 0]) cylinder(r = M5 / 2, h = 10, center = true);
}
translate ([-(X / 2) - 5, 0, -9.5]) difference () {
rounded_cube([15, 15, 5], d = 2);
translate([0, 0, -4]) cube([15, 15, 5], center = true);
translate([-2, 0, 0]) cylinder(r = M5 / 2, h = 10, center = true);
}*/
}
//intersection () {
difference () {
case();
//translate([-23, 0, 0]) cube([100, 100, 100], center = true);
}
// translate([-14, 0, 12]) cube([10, 40, 10], center = true);
//}