mcopy/scad/sequencer_case.scad

130 lines
3.9 KiB
OpenSCAD
Raw Normal View History

2020-07-01 22:04:10 +00:00
include <./arduino.scad>;
include <./common/common.scad>;
DEBUG = false;
casePostZ = -1.5;
casePostPosition1 = [36, -31, casePostZ];
casePostPosition2 = [-36, 31, casePostZ];
2020-07-01 22:04:10 +00:00
module rounded_cube (c, d) {
r = d / 2;
scaled = [c[0] - d, c[1] - d, c[2] - d];
minkowski() {
sphere(r = r);
cube(scaled, center = true);
}
}
module cable_void (pos = [0, 0, 0], rot = [90, 0, 0], H = 10 + 1) {
translate(pos) rotate(rot) cylinder(r = R(5), h = H, center = true);
}
2020-07-01 22:04:10 +00:00
module cable_plug_void (pos = [0, 0, 0]) {
translate(pos) difference () {
rotate([90, 0, 0]) cylinder(r = R(9), h = 5, center = true);
cable_void();
2020-07-01 22:04:10 +00:00
}
}
2020-07-01 22:04:10 +00:00
module arduino_uno_standoffs (pos) {
2020-07-01 22:04:10 +00:00
difference () {
translate(pos) rotate([0, 0, 90]) standoffs(UNO, mountType=PIN);
2020-07-01 22:04:10 +00:00
translate([0, 0, -29]) cube([85, 75, 30], center = true);
}
}
module case_shell (pos = [0,0,0]) {
translate(pos) difference () {
rounded_cube([85, 75, 30], 8);
rounded_cube([85 - 6, 75 - 6, 30 - 6], 6);
2020-07-01 22:04:10 +00:00
}
}
module case_post (pos = [0, 0, 0], H = 23) {
translate(pos) difference () {
cylinder(r = R(7), h = H, center = true);
2020-07-01 22:04:10 +00:00
translate([0, 0, 15]) cylinder(r = 2 / 2, h = 23, center = true);
}
}
module case_bottom (pos = [0, 0, 0], board = "uno", cables = 2) {
$fn = 60;
plugPosition1 = [20, -37, 0];
plugPosition2 = [-20, -37, 0];
translate(pos) {
difference () {
case_shell();
translate([0, 0, 25]) cube([85, 75, 30], center = true);
if (board == "uno") {
translate([40, -6.5, 4]) cube([15, 13, 20], center = true);
}
if (cables > 0) cable_void(plugPosition1);
if (cables > 1) cable_void(plugPosition2);
}
if (cables > 0) cable_plug_void(plugPosition1);
if (cables > 1) cable_plug_void(plugPosition2);
if (board == "uno") {
arduino_uno_standoffs([36, -22, -17]);
} else if (board == "nano") {
}
/*
//foot
translate([0, 42, -(30 / 2) + (5 / 2) - 1.5]) difference () {
rounded_cube([20, 20, 10], 4);
translate([0, 0, -6]) cube([20, 20, 10], center = true);
translate([0, -17, 6]) cube([20, 20, 10], center = true);
translate([0, 3, 0]) cylinder(r = 4 / 2, h = 10, center = true);
}
//foot
translate([0, -42, -(30 / 2) + (5 / 2) - 1.5]) difference () {
rounded_cube([20, 20, 10], 4);
translate([0, 0, -6]) cube([20, 20, 10], center = true);
translate([0, 17, 6]) cube([20, 20, 10], center = true);
translate([0, -3, 0]) cylinder(r = 4 / 2, h = 10, center = true);
}*/
case_post(casePostPosition1);
case_post(casePostPosition2);
2020-07-01 22:04:10 +00:00
}
}
module case_top (pos = [0,0,0], board = "uno") {
2020-07-01 22:04:10 +00:00
$fn = 60;
translate(pos) difference () {
2020-07-01 22:04:10 +00:00
rounded_cube([85, 75, 30], 8);
//case_shell([0, 0, 3]);
2020-07-01 22:04:10 +00:00
translate([0, 0, 17]) cube([85, 75, 30], center = true);
translate([0, 0, -17]) cube([85, 75, 30], center = true);
translate([36, -31, 0]) {
cylinder(r = 2 / 2, h = 23, center = true);
translate([0, 0, 23 / 2]) cylinder(r = 4 / 2, h = 23, center = true);
}
translate([-36, 31, 0]) {
cylinder(r = 2 / 2, h = 23, center = true);
translate([0, 0, 23 / 2]) cylinder(r = 4 / 2, h = 23, center = true);
}
}
}
PART="bottom_nano";
2020-07-01 22:04:10 +00:00
if (PART == "bottom_uno") {
case_bottom(board = "uno");
if (DEBUG) {
translate([36, -22, -7]) rotate([0, 0, 90]) arduino();
//translate([0, 0, 20]) case_top();
}
}else if (PART == "bottom_nano") {
case_bottom(board = "nano", cables = 1);
//case_top([0, 0, 20]);
2020-07-01 22:04:10 +00:00
} else if (PART == "top") {
case_top();
} else if (PART == "top_nano") {
case_top_nano(board = "nano");
2020-07-01 22:04:10 +00:00
}