mcopy/scad/light.scad

328 lines
12 KiB
OpenSCAD
Raw Normal View History

include <./common.scad>;
/*
CynKen 1Pcs Optical Glass RGB Dispersion Prism X-CUBE for Physics Teach Decoration Art
Specifications:
Material: K9 Cristal
Size: 2cm x 2cm x 1.7cm/0.8'' x 0.8''
*/
module prism () {
cube([20, 20, 17], center = true);
}
module adafruit_pixie () {
$fn = 60;
W = 0.8 * 25.4;
L = 0.78 * 25.4;
//L = 15;
Z = 1.5;
difference () {
union () {
rounded_cube([W, 15, Z], d = 3, center = true);
rounded_cube([9, L, Z], d = 3, center = true);
translate([W/2, 0, 0]) cylinder(r = 2, h = Z, center = true);
translate([-W/2, 0, 0]) cylinder(r = 2, h = Z, center = true);
}
translate([W/2, 0, 0]) cylinder(r = 1, h = 10, center = true);
translate([-W/2, 0, 0]) cylinder(r = 1, h = 10, center = true);
}
translate([0, 0, Z/2 + 1]) cylinder(r = 8/2, h=2, center = true);
translate([0, 0, Z/2 + 1 + 1]) sphere(r = 2.5, center = true);
}
module pixie_mount () {
$fn = 60;
W = 0.8 * 25.4;
L = 0.78 * 25.4;
Z = 12;
INNER_D = 1.9;
FAN_W = 50;
LENS_OFFSET = -5;
if (DEBUG) {
translate([0, LENS_OFFSET, 0]) rotate([90, 0, 0]) adafruit_pixie();
}
//pins for mounting pixie
2018-01-16 02:17:19 +00:00
translate ([0, -0.5, 0]) rotate([90, 0, 0]) {
translate([W/2, 0, -2]) cylinder(r = INNER_D / 2, h = Z + 1, center = true);
translate([-W/2, 0, -2]) cylinder(r = INNER_D / 2, h = Z + 1, center = true);
translate([W/2, 0, -(Z / 2) + 2]) cylinder(r = 2.2, h = Z, center = true);
translate([-W/2, 0, -(Z / 2) + 2]) cylinder(r = 2.2, h = Z, center = true);
translate([W/2, 0, -Z + (Z / 4)]) cylinder(r = 4, h = Z/2, center = true);
translate([-W/2, 0, -Z + (Z / 4)]) cylinder(r = 4, h = Z/2, center = true);
translate([W/2, 0, -1]) {
difference () {
translate([0, 0, -1]) cylinder(r = 4, h = Z, center = true);
cylinder(r = 2.2, h = 20, center = true);
translate([-5, 0, 11]) cube([10, 10, 20], center = true);
}
}
translate([-W/2, 0, -1]) {
difference () {
translate([0, 0, -1]) cylinder(r = 4, h = Z, center = true);
cylinder(r = 2.2, h = 20, center = true);
translate([5, 0, 11]) cube([10, 10, 20], center = true);
}
}
}
//outer shell surrounding pixie
translate ([0, -1 + LENS_OFFSET, -6]) {
2018-01-16 02:17:19 +00:00
difference () {
2018-01-16 02:17:19 +00:00
translate([0, 0, 6]) rounded_cube([W + 20, 40, 32], d = 6, center = true);
translate([0, 0, 6]) rounded_cube([(W + 16) - 4, 36 - 4, 32 + 1], d = 4, center = true);
2018-01-16 02:17:19 +00:00
//inner tab for centering
translate([0, 0, 6]) cube([W + 16, 10, 32 - 10], center = true);
//cylinder void for bolt
translate([0, 3, 6]) rotate([0, 90, 0]) cylinder(r = 1, h = 40 + 1, center = true, $fn = 60);
//cut in half
translate([0, -50, 0]) cube([100, 100, 100], center = true);
//wires
translate([0, 0, -3]) cube([10, 40, 5], center = true);
2018-01-16 02:17:19 +00:00
translate([-5, 0, -5.5]) cube([2, 40, 10], center = true);
}
}
}
module diffuser_mount () {
$fn = 100;
W = 0.8 * 25.4;
translate ([0, 0, -6]) {
difference () {
2018-01-16 02:17:19 +00:00
translate([0, 0, 6]) rounded_cube([W + 20, 40, 32], d = 6, center = true);
translate([0, 0, 6]) rounded_cube([(W + 16) - 4, 36 - 4, 32 + 1], d = 4, center = true);
2018-01-16 02:17:19 +00:00
//circular void
translate([0, -8, 8]) rotate([90, 0, 0]) cylinder(r = 10, h = 5, center = true);
//cylinder void for bolt
translate([0, 3, 6]) rotate([0, 90, 0]) cylinder(r = 1, h = 40 + 1, center = true, $fn = 60);
//cut in half
translate([0, 50, 0]) {
difference () {
cube([100, 100, 100], center = true);
translate([0, -50, 6]) cube([W + 16, 10, 32 - 10], center = true);
}
}
translate ([0, -18, 6]) rotate([90, 90, 0]) cylinder(r = 30 / 2, h = 20, center = true);
//void for attachment
//translate([20, -8.5, 6]) cube([8, 8, 8], center = true);
}
translate([22, -8.5, 6]) light_diffuser_notch();
}
translate ([0, -15.5, 0]) rotate([90, 90, 0]) {
difference () {
2018-01-16 02:17:19 +00:00
cylinder(r = 30 / 2, h = 9, center = true);
cylinder(r = 28 / 2, h = 9 + 1, center = true);
}
}
}
module light_diffuser_notch () {
difference () {
cube([6, 12, 8], center = true);
translate([-1, 0, 7]) rotate([0, -20, 0]) cube([8, 12 + 1, 8], center = true);
translate([-1, 0, -7]) rotate([0, 20, 0]) cube([8, 12 + 1, 8], center = true);
}
}
module diffuser_spacer () {
$fn = 100;
LEN = 15;
THICKNESS = 3;
difference () {
cylinder(r = 27.9 / 2, h = LEN, center = true);
cylinder(r = 23 / 2, h = LEN + 1, center = true);
translate([0, 0, (LEN / 2) - (THICKNESS / 2)]) cylinder(r = 26 / 2, h = THICKNESS, center = true);
}
}
module diffuser_insert () {
$fn = 100;
cylinder(r = 26 / 2, h = 2, center = true);
}
module light_body () {
FAN_W = 50;
FAN_Z = 10;
$fn = 60;
translate([-8, 8, 0]) difference() {
rounded_cube([FAN_W + 8, FAN_W + 8, FAN_Z], d = 6, center = true);
rounded_cube([FAN_W + 1, FAN_W + 1, FAN_Z + 1], d = 4, center = true);
}
//trapezoid connector to the fan
translate ([0, 0, (FAN_Z / 2) + (30 / 2) + 15]) {
difference () {
hull () {
rounded_cube([40, 40, 0.1], d = 6, center = true);
translate([-8, 8, -30]) rounded_cube([FAN_W + 8, FAN_W + 8, 0.1], d = 6, center = true);
}
translate([0, 0, 0.1]) hull () {
rounded_cube([32, 32, 0.1], d = 4, center = true);
translate([-8, 8, -30.2])
//cylinder(r = (FAN_W - 8) / 2, h = 30.2, center = true);
rounded_cube([FAN_W - 8, FAN_W - 8, 0.1], d = 20, center = true);
}
}
}
translate([0, 0, 34]) difference () {
rounded_cube([36+4, 36+4, 10], d = 6, center = true);
rounded_cube([36, 36, 10 + 1], d = 6, center = true);
translate([0, -15, 51 - 34]) rotate([90, 0, 0]) cylinder(r = 30 / 2, h = 20, h = 20, center = true);
}
}
2018-01-16 14:54:23 +00:00
module light_body35 () {
$fn = 60;
W = 0.8 * 25.4;
L = 0.78 * 25.4;
Z = 12;
FAN_W = 35;
FAN_Z = 10;
translate([0, 0, 5]) difference () {
rounded_cube([W + 20 + 6, 40 + 6, 13], d = 6, center = true);
rounded_cube([W + 20, 40, 13 + 1], d = 6, center = true);
translate([0, -15, 20 - 1.5]) rotate([90, 0, 0]) cylinder(r = 31 / 2, h = 30, center = true);
}
translate([0, 0, 0]) difference() {
rounded_cube([W + 20 + 6, 40 + 6, FAN_Z], d = 6, center = true);
rounded_cube([FAN_W + 0.2, FAN_W + 0.2, FAN_Z + 1], d = 4, center = true);
}
}
module light_vent_top () {
2018-01-16 14:54:23 +00:00
$fn = 60;
W = 0.8 * 25.4;
L = 0.78 * 25.4;
Z = 12;
translate([0, 0, -1.5]) difference () {
rounded_cube([W + 20 + 6, 40 + 6, 13], d = 6, center = true);
rounded_cube([W + 20, 40, 13 + 1], d = 6, center = true);
translate([0, -15, -20 + 1.5]) rotate([90, 0, 0]) cylinder(r = 31 / 2, h = 30, center = true);
}
translate([0, 0, 1]) difference() {
rounded_cube([W + 20 + 1, 40 + 1, 8], d = 6, center = true);
for (i = [0:5]) {
translate([i * 6, 0, 0]) rotate([0, -40, 0]) cube([4, 36 + 3, 12], center = true);
translate([(i + 1) * -6, 0, 0]) rotate([0, -40, 0]) cube([4, 36 + 3, 12], center = true);
}
//translate([50, 0, 0]) cube([100, 100, 100], center = true);
}
}
2018-01-16 14:54:23 +00:00
module fan (SIZE = 50) {
$fn = 60;
2018-01-16 14:54:23 +00:00
FAN_W = SIZE;
FAN_Z = 10;
SCREW_D = 4;
SCREW_INNER = 6;
difference () {
rounded_cube([FAN_W, FAN_W, FAN_Z], d = 4, center = true);
translate([(FAN_W - SCREW_INNER)/2, (FAN_W - SCREW_INNER)/2, 0]) cylinder(r = SCREW_D/2, h = FAN_Z + 1, center = true);
translate([-(FAN_W - SCREW_INNER)/2, (FAN_W - SCREW_INNER)/2, 0]) cylinder(r = SCREW_D/2, h = FAN_Z + 1, center = true);
translate([-(FAN_W - SCREW_INNER)/2, -(FAN_W - SCREW_INNER)/2, 0]) cylinder(r = SCREW_D/2, h = FAN_Z + 1, center = true);
translate([(FAN_W - SCREW_INNER)/2, -(FAN_W - SCREW_INNER)/2, 0]) cylinder(r = SCREW_D/2, h = FAN_Z + 1, center = true);
cylinder(r = (FAN_W - SCREW_INNER) /2, h = FAN_Z + 1, center = true);
}
}
module flashlight_mount () {
$fn = 100;
FLASHLIGHT_D = 25.3;
ROD_D = 12.6;
difference () {
rotate([0, 90, 0]) cylinder(r = FLASHLIGHT_D / 2 + 3, h = ROD_D, center = true);
rotate([0, 90, 0]) cylinder(r = FLASHLIGHT_D / 2, h = ROD_D + .1, center = true);
}
translate([0, -35, 0]) rotate([90, 0, 0]) {
difference () {
cylinder(r = ROD_D / 2, h = 43, center = true);
translate([-10, 0, 24.5]) cube([15, 15, 15], center = true);
}
}
translate([0, -46.4, 0]) {
difference() {
rotate ([90, 90, 0]) cylinder(r = (ROD_D / 2) + 2, h = 3, center = true);
translate([50 + (ROD_D / 2), 0, 0]) cube([100, 100, 100], center = true);
translate([-50 - (ROD_D / 2), 0, 0]) cube([100, 100, 100], center = true);
}
}
}
module flashlight_mount_cap (DEBUG = false) {
$fn = 120;
ROD_D = 12.6;
translate([0, 0, 0]) rotate([90, 0, 0]) {
difference () {
union () {
translate([0, 0, 0]) cylinder(r = 9, h = 7, center = true);
translate([-6, 0, 0]) cube([12, 18, 7], center = true);
translate([-10.75, 0, -3]) cube([2.5, 18, 11], center = true);
}
difference () {
translate([0, 0, -(7 - 4.5) / 2 - .1]) cylinder(r = ROD_D / 2, h = 4.5, center = true);
translate([-10, 0, 0]) cube([15, 15, 15], center = true);
}
if (DEBUG) {
translate([0, 50, 0]) cube([100, 100, 100], center = true);
}
}
}
}
module impromptu_mount () {
$fn = 100;
ROD_D = 12.6;
translate([0, -35, 0]) rotate([90, 0, 0]) {
difference () {
union() {
cylinder(r = ROD_D / 2, h = 43, center = true);
translate([0, 0, -5]) cylinder(r = (ROD_D / 2) + 2, h = 30, center = true);
}
//notch for cap
translate([-10, 0, 24.5]) cube([15, 15, 15], center = true);
translate([0, 0, -22.25]) cube([45, 45, 15], center = true);
translate([0, 0, -12.5 - 0.5]) scale([4, 1, 1]) rotate([0, -90, 90]) light_diffuser_notch();
}
difference () {
translate([0, 0, -12.25 + 1]) cube([40, 12, 7], center = true);
translate([0, 0, -12.5 - 0.5]) scale([4, 1, 1]) rotate([0, -90, 90]) light_diffuser_notch();
}
}
translate([0, -46.4, 0]) {
difference() {
rotate ([90, 90, 0]) cylinder(r = (ROD_D / 2) + 2, h = 3, center = true);
translate([50 + (ROD_D / 2), 0, 0]) cube([100, 100, 100], center = true);
translate([-50 - (ROD_D / 2), 0, 0]) cube([100, 100, 100], center = true);
}
}
}
module light_fresnel (D = 24, BASE = 3, RINGS = 4, d) {
$fn = 200;
STEP = D / RINGS;
cylinder(r = D / 2, h = BASE, center = true);
translate([0, 0, 4]) for (i = [0 : RINGS]) {
cylinder(r1 = (D - (STEP * (i + 1))) / 2, r2 = (D - (STEP * i)) / 2, h = 2, center = true);
}
}