intval3/hardware/case.scad

432 lines
15 KiB
OpenSCAD

include <./modules.scad>
include <./variables.scad>
module l289N_holes (r = 3/2 - .2) {
$fn = 60;
DISTANCE = 36.5;
H = 50;
translate([0, 0, 0]) cylinder(r = r, h = H * 5, center = true);
translate([DISTANCE, 0, 0]) cylinder(r = r, h = H * 5, center = true);
translate([DISTANCE, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
translate([0, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
}
module l289N_hole_test () {
$fn = 40;
difference () {
cube([140, 40, 3], center = true);
cylinder(r = 3/2, h = 50, center = true);
translate([7, 0, 0]) cylinder(r = 3/2, h = 50, center = true);
translate([7 * 2, 0, 0]) cylinder(r = 3/2 - .1, h = 50, center = true);
translate([7 * 3, 0, 0]) cylinder(r = 3/2 - .2, h = 50, center = true);
translate([7 * 4, 0, 0]) cylinder(r = 3/2 - .3, h = 50, center = true);
}
}
module intval_panel_laser () {
$fn = 40;
difference () {
union () {
difference () {
translate ([0, 0, 8.5]) {
union () {
translate([12, -5, 0]) {
rotate([0, 0, -13]) {
rounded_cube([panel_2_x + 20, panel_2_y, 25.4/8], d = 20, center = true);
}
}
//reinforces
//translate([54, -12, -3]) rotate([0, 0, 89]) rounded_cube([110, 20, 4], 20, center = true);
//translate([-17, 2, -3]) rotate([0, 0, 72]) rounded_cube([94, 13, 4], 13, center = true);
}
}
for (i = [0 : len(xArray) - 1]) {
bolex_pin_inner_laser(xArray[i], yArray[i]);
}
}
//onetoone(26, 10, 4.5);
//extends for onetoone
}
//onetoone(9, 14, 8.5);
bearing_laser(54.5, 12, 6, width= 18, hole=false);
translate([-38, -1, 0]) rotate([0, 0, -13]) l289N_holes();
//translate ([6, -9, height + 3.5]) cylinder(r = bolt_inner, h = 50, center = true); //cover standoff hole
//frame_counter_access(); //use the space
m_p_access();
remove_front();
translate([6, 18, 0]) rotate([0, 0, -13]) cube([15, 25, 40], center=true); //motor wind key hole
for (i = [0 : len(mm_x) - 1]) {
translate([mm_x[i], mm_y[i], 0]) cylinder(r = bolt_inner, h = 100, center = true);
}
intval_laser_panel_cover();
}
}
module intval_panel_laser_debug () {
$fn = 40;
difference () {
union () {
difference () {
translate ([0, 0, 8.5]) {
union () {
translate([12 - 32.5, -5 + 9, 0]) {
rotate([0, 0, -13]) {
rounded_cube([panel_2_x + 20 + 65, panel_2_y, 25.4/8], d = 20, center = true);
}
}
//reinforces
//translate([54, -12, -3]) rotate([0, 0, 89]) rounded_cube([110, 20, 4], 20, center = true);
//translate([-17, 2, -3]) rotate([0, 0, 72]) rounded_cube([94, 13, 4], 13, center = true);
}
}
for (i = [0 : len(xArray) - 1]) {
bolex_pin_inner_laser(xArray[i], yArray[i]);
}
}
//onetoone(26, 10, 4.5);
//extends for onetoone
}
//onetoone(9, 14, 8.5);
bearing_laser(54.5, 12, 6, width= 18, hole=false);
translate([-38, -1, 0]) rotate([0, 0, -13]) l289N_holes();
//translate ([6, -9, height + 3.5]) cylinder(r = bolt_inner, h = 50, center = true); //cover standoff hole
//frame_counter_access(); //use the space
m_p_access();
remove_front();
translate([6, 18, 0]) rotate([0, 0, -13]) cube([15, 25, 40], center=true); //motor wind key hole
for (i = [0 : len(mm_x) - 1]) {
translate([mm_x[i], mm_y[i], 0]) cylinder(r = bolt_inner, h = 100, center = true);
}
intval_laser_panel_cover(DEBUG = true);
translate ([4, 12, 0]) {
translate([-51.5, -8.5, 0]) cylinder(r = 2.8/2, h = 100, center = true);
translate([-51.5 - 66, -8.5 + 15, 0]) cylinder(r = 2.8/2, h = 100, center = true);
translate([-51.5 + 11.5, -8 + 49, 0]) cylinder(r = 2.8/2, h = 100, center = true);
translate([-51.5 - 54.5, -8.5 + 49 + 16, 0]) cylinder(r = 2.8/2, h = 100, center = true);
}
}
}
module bolex_pin_laser (x, y) {
in = innerD;
$fn = 120;
translate ([x, y, 1]) {
difference () {
union () {
translate([0, 0, (height / 2) - 3]) cylinder(r = (outerD + 5) / 2, h = 2, center = true);
translate([0, 0, 1.175/2]) cylinder(r = outerD / 2, h = height + 1.175 , center = true);
}
cylinder(r = in / 2, h = height * 2, center = true);
translate([0, 0, (height / 2) - 1.9]) cylinder(r1 =4.5 / 2, r2 = 6.7 / 2, h = 2, center = true);
translate([0, 0, (height / 2) + 1]) cylinder(r = 6.7 / 2, h = 4, center = true);
}
}
}
module intval_laser_standoffs () {
$fn = 40;
for (i = [0 : len(xArray) - 1]) {
bolex_pin_laser(xArray[i], yArray[i]);
}
}
module intval_laser_standoffs_plate () {
$fn = 40;
rotate ([0, 180, 0]) {
bolex_pin_laser(0, 0);
bolex_pin_laser(15, 0);
bolex_pin_laser(0, 15);
bolex_pin_laser(15, 15);
}
//decoys
//translate([7, 7, 0]) decoys(23, 5.5, 6);
}
module bolex_pin_inner_laser (x, y) {
$fn = 40;
//innerD = 6.75;
innerD = 9;
translate ([x, y, 1]) {
cylinder(r = innerD / 2, h = height * 2, center = true);
//translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
}
}
module bearing_laser (x, y, z, width= 8, hole = true) {
innerD = 8.05;
outerD = 22.1 - .4;
fuzz = 0.1;
translate ([x, y, z]) {
difference () {
cylinder(r = outerD / 2 + fuzz, h = width, center = true);
if (hole) {
cylinder(r = innerD / 2 - fuzz, h = width, center = true);
}
}
}
}
module intval_laser_panel_cover (LASER = false, DEBUG = false, ALL_RED = false) {
$fn = 60;
cover_h = 16 + 3 + 4 + 10;
MATERIAL = 25.4 / 8;
module top () {
difference () {
rotate([0, 0, -13]) {
rounded_cube([100, panel_2_y, MATERIAL], d = 20, center = true);
}
translate([53, 12, 0]) cylinder(r = 30, h = 60, center = true); //hole for motor mount
translate([22, 20, 0]) cylinder(r = 8, h = 60, center = true); // hole for moto mount bolt holder
translate([53, 42, 0]) cylinder(r = 15, h = 60, center = true); //removes pointy part
translate([-44, 8, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([0, 90, 0]) back_side();
translate([2, 49, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([90, 0, 0]) top_side();
translate([-22, -45, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([90, 0, 0]) bottom_side();
for (i = [0 : len(xArray) - 1]) {
translate([xArray[i], yArray[i], 0]) cylinder(r = 7 / 2, h = height * 20, center = true); //top standoff access
}
translate ([8, -9, height + 3.5]) cylinder(r = bolt_inner - .5, h = 50, center = true); //bottom standoff access
}
}
module back_side () {
difference () {
translate([0, 1.75, 0]) cube([cover_h + 2 + (MATERIAL * 2) + 1 + 3, panel_2_y - 10, MATERIAL], center = true);
translate([-13 - 3.1, 20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
translate([-13 - 3.1, -20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
translate([13 + 3.1, 20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
translate([13 + 3.1, -20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
translate([10 , -22 ,0]) cube([10, 15, 30], center = true); //access for usb
translate([0, 50.5, 0]) cube([17.5, MATERIAL, MATERIAL], center = true);
translate([0, -50.5 + (1.75 / 2) + MATERIAL - 0.25, 0]) cube([17.5, MATERIAL, MATERIAL], center = true);
}
}
module top_side () {
difference () {
translate([-2.5, 0, 0]) cube([ panel_2_x - 41, cover_h + 2 + (MATERIAL * 2) + 1 + 3, MATERIAL], center = true);
translate([28, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([-28, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([28, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([-28, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([-35.5, -13 - 8.1, 0]) cube([MATERIAL, 25, MATERIAL], center = true); //side tabs
translate([-35.5, 13 + 8.1, 0]) cube([MATERIAL, 25, MATERIAL], center = true); //side tabs
}
}
module bottom_side () {
difference () {
translate([.25, 0, 0]) cube([ panel_2_x - 39.5, cover_h + 2 + (MATERIAL * 2) + 1 + 3, MATERIAL], center = true);
translate([25, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([-25, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([30, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([-30, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
translate([-15, 1, 0]) cylinder(r = 6/2, h = 50, center = true); //hole for audio jack -> add countersink
translate([9, 1, 0]) cylinder(r = 8/2, h = 20, center = true); //hole for female DC power jack, 12vdc
translate([-33.5, 17.3, 0]) cube([MATERIAL, 17.5, MATERIAL], center = true);
translate([-33.5, -17.3, 0]) cube([MATERIAL, 17.5, MATERIAL], center = true);
}
}
if (LASER) {
projection() top();
if (!DEBUG) {
translate([-75, 0, 0]) rotate([0, 0, -13]) projection() back_side();
}
translate([0, 80, 0]) rotate([0, 0, -13]) projection() top_side();
translate([0, -80, 0]) rotate([0, 0, -13]) projection() bottom_side();
} else {
translate([0, 0, height + cover_h]) top();
if (!DEBUG) {
translate([-44, 8, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([0, 90, 0]) back_side();
}
translate([2, 49, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([90, 0, 0]) top_side();
translate([-22, -45, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([90, 0, 0]) bottom_side();
}
}
module intval_laser_panel_cover_standoff (DECOYS = false) {
tight = 0.2;
cover_h = 21;
$fn = 40;
translate ([6, -9, height + 3.5]) {
difference() {
cylinder(r = bolt_inner + 1.4, h = cover_h - .5, center = true);
cylinder(r = bolt_inner - tight, h = cover_h, center = true);
}
if (DECOYS) {
decoys(12, -(cover_h / 2) + 2);
}
}
}
module remove_front () {
translate([87, 0, 4]) rotate([0, 0, 89]) cube([170, 40, 40], center = true);
}
module onetoone (size, height, z) {
translate ([one_to_one_x, one_to_one_y, z]) {
cylinder(r = size / 2, h = height, center = true);
}
}
module m_p_access () {
translate ([18, -44, 0]) {
rounded_cube([35, 17, 50], 17, true);
}
}
module bolex_pin (x, y) {
in = innerD;
translate ([x, y, 1]) {
difference () {
union () {
translate([0, 0, (height / 2) - 2]) cylinder(r = (outerD + 4) / 2, h = 4, center = true);
cylinder(r = outerD / 2, h = height, center = true);
}
cylinder(r = in / 2, h = height, center = true);
translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
}
}
}
module bolex_pin_inner (x, y) {
translate ([x, y, 1]) {
cylinder(r = innerD / 2, h = height * 2, center = true);
translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
}
}
module intval_pins () {
for (i = [0 : len(xArray) - 1]) {
bolex_pin(xArray[i], yArray[i]);
}
}
module key () {
tighten = 0.25;
difference () {
cylinder(r = 6.7 / 2, h = 5, center = true);
cylinder(r = (4.76 -+ tighten) / 2, h = 5, center = true);
}
translate ([0, 0, -7.5]) {
cylinder(r = 6.7 / 2, h = 10, center = true);
}
}
module keyHole () {
translate ([0, 0, 1.75]) {
cube([10, 2, 3.5], center = true);
}
}
module key_end (rotArr = [0, 0, 0], transArr = [0, 0, 0], ALT = false) {
translate(transArr) {
rotate (rotArr) {
difference () {
key();
keyHole();
if (ALT) {
translate([-2.5, 0, 1.75]) cube([5, 3, 3.5], center= true);
}
}
}
}
}
module frame_counter_access () {
x = 37.5;
y = 39;
translate([x, y, 8.5]) {
difference () {
union () {
rotate ([0, 0, 19]) {
translate([0, 9, 0]) {
cube([12, 16, 4], center = true);
}
}
rotate ([0, 0, -19]) {
translate([0, 9, 0]) {
cube([12, 16, 4], center = true);
}
}
}
translate([0, 15.5, 0]) {
cube([17, 6, 4], center = true);
}
}
cylinder(r = 6.2, h = 4, center = true);
}
}
module bearing (x, y, z, width= 8, hole = true, calval = 0) {
innerD = 8.05;
outerD = 22.1;
fuzz = 0.1;
translate ([x, y, z]) {
difference () {
cylinder(r = outerD / 2 + fuzz + calval, h = width, center = true);
if (hole) {
cylinder(r = innerD / 2 - fuzz, h = width, center = true);
}
}
}
}
module key_cap () {
$fn = 40;
outerD = 22.1;
fuzz = 0.1;
difference () {
cylinder(r = outerD / 2 + fuzz + 1, h = 18, center = true);
translate([0, 0, -1]) cylinder(r = outerD / 2, h = 16, center = true);
}
//decoys(23, 7);
}
module motor_cap_120 (HALF = false) {
$fn = 60;
base_d = 47;
base_inner = 29;
inner_h = 57;
difference () {
union () {
translate([-6, 0, 24]) cylinder(r = base_d/2, h = 15, center = true);
translate([0, 0, inner_h]) cylinder(r=(base_inner / 2) + 3, h=inner_h, center = true);
}
translate([-6, 0, -5.75]) cylinder(r = base_d/2 - 1, h = 50, center = true); //to grip edge of
translate([-6, 0, 3]) cylinder(r = base_d/2 - 3, h = 50, center = true);
translate([-25, 0, 19]) cube([10, 10, 15], center = true); //wire access
//120 motor
translate([0, 0, inner_h - 2]) cylinder(r=base_inner / 2, h=inner_h, center = true); //inner cylinder
if (HALF){
translate([100, 0, 0]) cube([200, 200, 200], center = true);
}
}
}
module bearing_calibrate (val = 0) {
mat = 25.4/8;
difference () {
cube([40, 40, mat], center = true);
bearing(0, 0, 0, hole = false, calval = val);
}
}
translate([-37, -25, 15]) rotate([0, 0, -13]) {
difference () {
cube([73, 38, 3], center = true);
translate([58 / 2, 23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true);
translate([-58 / 2, 23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true);
translate([58 / 2, -23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true);
translate([-58 / 2, -23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true);
}
}