 mmcwilliams
|
5a94f52b79
|
Update to larger dc jack for intval case.
|
2017-11-20 17:16:00 -05:00 |
|
M McWilliams
|
c7bbe4a592
|
Merge branch 'dev' of https://github.com/sixteenmillimeter/intval3 into dev
|
2017-11-10 04:58:17 -05:00 |
|
M McWilliams
|
d17e871ba9
|
Add pads file for creating a compact board
|
2017-11-09 09:41:19 -05:00 |
|
mmcwilliams
|
d939eeb847
|
flipped text
|
2017-11-08 12:45:35 -05:00 |
|
M McWilliams
|
8fd1ae63ec
|
V4 prototype of the board. This one goes to production.
|
2017-11-08 07:47:04 -05:00 |
|
mmcw-dev
|
2d0c8f0755
|
Update PCB design to use raspberry pi 3 headers. Use 5mm terminal blocks.
|
2017-11-03 14:29:50 -04:00 |
|
M McWilliams
|
2fbabbdd3e
|
Third revision of the intval3 prototype board. Lookin good.
|
2017-10-30 18:02:14 -04:00 |
|
M McWilliams
|
14b36f76bf
|
Tighten up board design
|
2017-10-27 18:56:45 -04:00 |
|
M McWilliams
|
05cdda615b
|
Adjust length of panel connection
|
2017-10-27 17:40:32 -04:00 |
|
mmcw-dev
|
0e4314818e
|
Extend the panel attachment tube to reach the top of the panel
|
2017-10-27 14:53:26 -04:00 |
|
mmcw-dev
|
2f547e773c
|
Use local stash
|
2017-10-27 14:42:27 -04:00 |
|
M McWilliams
|
2fe218b3ef
|
electronics_mount doesnt exist, just use l289N_mount
|
2017-10-26 20:28:44 -04:00 |
|
mmcwilliams
|
ef9e61b736
|
Made minor adjustments to case for better fit and for access.
|
2017-10-25 12:13:03 -04:00 |
|
mmcwilliams
|
abbf6500b5
|
Test case ready to cut
|
2017-10-25 11:40:54 -04:00 |
|
mmcwilliams
|
461a0a77d9
|
Position tabs on case side pieces using arguments, not hardcoded values.
|
2017-10-25 10:42:37 -04:00 |
|
mmcwilliams
|
71610405d2
|
Start adapting case to new size requirements.
|
2017-10-24 16:44:06 -04:00 |
|
mmcw-dev
|
d841f29006
|
Restore state gracefully.
|
2017-10-24 09:56:59 -04:00 |
|
mmcw-dev
|
a408414090
|
Begin re-write of intval hardware files.
|
2017-10-24 09:56:15 -04:00 |
|
mmcw-dev
|
621464973a
|
Reduce padding top from 20px to 5px
|
2017-10-23 20:54:03 -04:00 |
|
mmcw-dev
|
39e89b4b33
|
setCounter not defined.
|
2017-10-23 20:44:35 -04:00 |
|
mmcw-dev
|
2ea975e480
|
counter not count.
|
2017-10-23 20:43:16 -04:00 |
|
mmcw-dev
|
05da1f280f
|
Add setCounter feature.
|
2017-10-23 20:41:28 -04:00 |
|
mmcw-dev
|
8eccf05a68
|
storage.getItem, not getItem, you scrub.
|
2017-10-23 20:31:24 -04:00 |
|
mmcw-dev
|
67f864f975
|
rReset not rRest, gah
|
2017-10-23 20:29:52 -04:00 |
|
mmcw-dev
|
f2f5d583ce
|
Added /reset endpoint to reset device state.
|
2017-10-23 13:33:05 -04:00 |
|
mmcw-dev
|
7ac642ee30
|
Accidentally commented out gpio from intval module
|
2017-10-23 13:32:45 -04:00 |
|
mmcw-dev
|
b307567a51
|
Persist device state with node-persist. This allows multiple controllers to share state, and for device to maintain settings between shutdowns.
|
2017-10-23 12:58:37 -04:00 |
|
mmcw-dev
|
d0e1026c7a
|
Don't set expsure to null.
|
2017-10-23 01:24:22 -04:00 |
|
mmcw-dev
|
0fcd6d0970
|
use setExposureScale to properly calculate time after autoscaling.
|
2017-10-23 01:20:20 -04:00 |
|
mmcw-dev
|
6801f30881
|
Change order again to prevent bad scaling.
|
2017-10-23 01:17:05 -04:00 |
|
mmcw-dev
|
4e819c84f9
|
Was accidentally writing object to number input. Was failing. Now writing the STATE.exposure integer and then changing the scale.
|
2017-10-23 01:13:31 -04:00 |
|
mmcw-dev
|
1689fb510f
|
Events were being triggered in wrong order.
|
2017-10-23 01:11:46 -04:00 |
|
mmcw-dev
|
7ca9ade4ea
|
Autoscale exposure on getState
|
2017-10-23 01:08:18 -04:00 |
|
mmcw-dev
|
65b1802390
|
If exposure is less than _frame.expected, set to 0 (default)
|
2017-10-23 00:37:44 -04:00 |
|
mmcw-dev
|
24c5331cf2
|
Simplify shutter() logic.
|
2017-10-23 00:33:02 -04:00 |
|
mmcw-dev
|
c508c6e693
|
Caught nagging bug, will calculate timing if default time is set.
|
2017-10-23 00:30:08 -04:00 |
|
mmcw-dev
|
29800a7b45
|
What a fatheaded typo. Was checking if exposure was in response, not if it is < BOLEX.expected
|
2017-10-23 00:26:53 -04:00 |
|
mmcw-dev
|
3bf6939549
|
Log exposure being set from state
|
2017-10-23 00:22:27 -04:00 |
|
mmcw-dev
|
325f2bbf84
|
ScaleAuto, not autoScale
|
2017-10-23 00:19:48 -04:00 |
|
mmcw-dev
|
796d1604f0
|
Set exposure and autoscale when restoring state
|
2017-10-23 00:17:02 -04:00 |
|
mmcw-dev
|
6368ece015
|
Set exposure, scale and parse time at different scales.
|
2017-10-23 00:03:12 -04:00 |
|
mmcw-dev
|
4a32fe3d60
|
Use 0 as default exposure in app.
|
2017-10-22 20:04:12 -04:00 |
|
mmcw-dev
|
c92e4ec3d3
|
Need to parseInt of counter value to increment properly
|
2017-10-22 20:01:43 -04:00 |
|
mmcw-dev
|
a9e13ac2a6
|
Restore device state in app, set counter in webapp,
|
2017-10-22 19:59:38 -04:00 |
|
mmcw-dev
|
253c8c2a54
|
Get state at startup (to maintain state on the device and report to the client on reload). Also, settings UI in place, need mscript UI as well.
|
2017-10-22 15:35:56 -04:00 |
|
mmcw-dev
|
99a5cbfc26
|
Data, not body, you dolt.
|
2017-10-21 22:53:35 -04:00 |
|
mmcw-dev
|
d7a64c07f9
|
Try without charset
|
2017-10-21 22:50:56 -04:00 |
|
mmcw-dev
|
7e057bc924
|
Need to declare content type for app to recognize body as JSON
|
2017-10-21 22:47:12 -04:00 |
|
mmcw-dev
|
d2d5458a70
|
use dataType json for ajax posts
|
2017-10-21 22:44:01 -04:00 |
|
mmcw-dev
|
a8b62ea392
|
Styles for setDir ready to test on device.
|
2017-10-21 22:41:58 -04:00 |