Matt McWilliams
|
561bfd784c
|
Work in progress of adding Makefile to build all OpenSCAD models for printing. Based off work in intval2 project with a slightly more automated approach. Hopefully can massage the parseVars.sh script into a single command within the Makefile.
|
2022-10-09 16:10:27 -04:00 |
Matt McWilliams
|
ca9ff6b621
|
Add reinforced motor key design with a notched corner
|
2021-05-02 14:46:44 -04:00 |
Matt McWilliams
|
1d1bb68cd1
|
Use new standoffs design in exploded view
|
2021-03-28 14:56:39 -04:00 |
Matt McWilliams
|
69190daf45
|
New standoffs design
|
2021-03-28 14:56:19 -04:00 |
Matt McWilliams
|
2e375086c8
|
release the laser cutting files as an svg for cutters that use this file type
|
2021-03-24 09:37:19 -04:00 |
mmcwilliams
|
8ef21c4991
|
Motor key is now printable without supports inside the set screw void and the hobbled rod void.
|
2020-07-09 09:15:11 -04:00 |
mmcwilliams
|
5bd524d51e
|
Work on anyeye revere projector.
|
2019-03-26 14:49:47 -04:00 |
mmcw-dev
|
3bf4bebbd5
|
Export raspberry pi zero w bonnet as gerber files and make a .zip of them to upload to OSHPark. Boards will be released as gerber files and pdf for etching your own boards manually, using the toner transfer method: https://www.dr-lex.be/hardware/tonertransfer.html
|
2019-03-07 21:55:43 -05:00 |
mmcwilliams
|
8fa5d6d980
|
Update board size
|
2019-02-22 13:07:54 -05:00 |
mmcw-dev
|
f3b7fa84c9
|
Add a bolt guide
|
2018-11-10 16:28:06 -05:00 |
mmcwilliams
|
23429ae359
|
Tweak intval key for new bearings
|
2018-10-09 15:38:35 -04:00 |
mmcwilliams
|
2066b28745
|
Move dxf files into their own directory
|
2018-10-04 12:33:33 -04:00 |
mmcwilliams
|
b4c858e126
|
Add an STL plate of all printable items
|
2018-10-04 11:11:05 -04:00 |
mmcwilliams
|
e970285b15
|
4x4 boards for etching
|
2018-08-27 10:45:41 -04:00 |
mmcw-dev
|
99e9dc6e7d
|
MAster mold for 120 key, test molds
|
2018-08-17 07:51:10 -04:00 |
mmcwilliams
|
18f90254cd
|
Electronics work
|
2018-08-16 16:32:39 -04:00 |
mmcwilliams
|
2907bfd8b6
|
Start reinfoced key
|
2018-08-09 12:37:46 -04:00 |
mmcwilliams
|
37194eac4b
|
Intval case dxf for cutting
|
2018-08-09 12:37:25 -04:00 |
mmcwilliams
|
a1ced19b42
|
Move all config files into ./conf
|
2017-12-31 01:26:29 -05:00 |
mmcwilliams
|
60cdbcdf25
|
Carriage belonged to the mcopy project, was misplaced here
|
2017-12-30 00:00:55 -05:00 |
mmcw-dev
|
2a2d71ec73
|
Begin designing a carriage and stand for the intval.
|
2017-12-15 09:01:46 -05:00 |
mmcw-dev
|
395c60b8a2
|
Key_cap sizing improved
|
2017-12-06 23:13:49 -05:00 |
mmcw-dev
|
58f2ec885a
|
Enlarge the panel mount column
|
2017-11-28 15:21:52 -05:00 |
mmcw-dev
|
b9ceb506c7
|
Motor cap to print.
|
2017-11-21 19:36:39 -05:00 |
mmcwilliams
|
4e76274e83
|
Turn off wireless power management
|
2017-11-21 16:33:51 -05:00 |
mmcwilliams
|
ed3e9c13c5
|
Configuration file used to enable wlan0 in network interfaces
|
2017-11-21 13:50:13 -05:00 |
mmcwilliams
|
5a94f52b79
|
Update to larger dc jack for intval case.
|
2017-11-20 17:16:00 -05:00 |
M McWilliams
|
c7bbe4a592
|
Merge branch 'dev' of https://github.com/sixteenmillimeter/intval3 into dev
|
2017-11-10 04:58:17 -05:00 |
M McWilliams
|
d17e871ba9
|
Add pads file for creating a compact board
|
2017-11-09 09:41:19 -05:00 |
mmcwilliams
|
d939eeb847
|
flipped text
|
2017-11-08 12:45:35 -05:00 |
M McWilliams
|
8fd1ae63ec
|
V4 prototype of the board. This one goes to production.
|
2017-11-08 07:47:04 -05:00 |
mmcw-dev
|
2d0c8f0755
|
Update PCB design to use raspberry pi 3 headers. Use 5mm terminal blocks.
|
2017-11-03 14:29:50 -04:00 |
M McWilliams
|
2fbabbdd3e
|
Third revision of the intval3 prototype board. Lookin good.
|
2017-10-30 18:02:14 -04:00 |
M McWilliams
|
14b36f76bf
|
Tighten up board design
|
2017-10-27 18:56:45 -04:00 |
M McWilliams
|
05cdda615b
|
Adjust length of panel connection
|
2017-10-27 17:40:32 -04:00 |
mmcw-dev
|
0e4314818e
|
Extend the panel attachment tube to reach the top of the panel
|
2017-10-27 14:53:26 -04:00 |
mmcw-dev
|
2f547e773c
|
Use local stash
|
2017-10-27 14:42:27 -04:00 |
M McWilliams
|
2fe218b3ef
|
electronics_mount doesnt exist, just use l289N_mount
|
2017-10-26 20:28:44 -04:00 |
mmcwilliams
|
ef9e61b736
|
Made minor adjustments to case for better fit and for access.
|
2017-10-25 12:13:03 -04:00 |
mmcwilliams
|
abbf6500b5
|
Test case ready to cut
|
2017-10-25 11:40:54 -04:00 |
mmcwilliams
|
461a0a77d9
|
Position tabs on case side pieces using arguments, not hardcoded values.
|
2017-10-25 10:42:37 -04:00 |
mmcwilliams
|
71610405d2
|
Start adapting case to new size requirements.
|
2017-10-24 16:44:06 -04:00 |
mmcw-dev
|
a408414090
|
Begin re-write of intval hardware files.
|
2017-10-24 09:56:15 -04:00 |
mmcwilliams
|
429441137e
|
Remove voltage step-up chips and add a voltage regulator for regulating 5v from a 12v source
|
2017-10-20 13:59:19 -04:00 |
mmcwilliams
|
50262facc2
|
Intval 3 board prototype
Design roughed in fritzing, the pdf pulled into photoshop and hand
routed.
|
2017-09-24 22:20:26 -04:00 |