Remove extra function name from docs

jsdoc does this well enough without repeating. Does not actually
improve readability in code

lib/blootstrap/Readme.md

@@ -7,7 +7,6 @@ Class representing the bluetooth interface
 <a name="Blootstrap+on"></a>
 
 ### blootstrap.on(eventName, callback)
-Blootstrap.on() -
 Binds functions to events that are triggered by BLE messages
 
 **Kind**: instance method of [<code>Blootstrap</code>](#Blootstrap)  

lib/blootstrap/index.js

@@ -26,7 +26,6 @@ class Blootstrap {
 		})
 	}
 	/**
-	* Blootstrap.on() -
 	* Binds functions to events that are triggered by BLE messages
 	*
 	* @param {string} 		eventName 	Name of the event to to bind

lib/intval/Readme.md

@@ -18,14 +18,12 @@ Class representing the intval3 features
 <a name="Intval+_declarePins"></a>
 
 ### intval._declarePins()
-Intval._declarePins() - 
 (internal function) Declares all Gpio pins that will be used
 
 **Kind**: instance method of [<code>Intval</code>](#Intval)  
 <a name="Intval+_undeclarePins"></a>
 
 ### intval._undeclarePins()
-Intval._undeclarePins() - 
 (internal function) Undeclares all Gpio in event of uncaught error
 that interupts the node process
 
@@ -33,28 +31,24 @@ that interupts the node process
 <a name="Intval+_startFwd"></a>
 
 ### intval._startFwd()
-Intval._startFwd() - 
 Start motor in forward direction by setting correct pins in h-bridge
 
 **Kind**: instance method of [<code>Intval</code>](#Intval)  
 <a name="Intval+_startBwd"></a>
 
 ### intval._startBwd()
-Intval._startBwd() - 
 Start motor in backward direction by setting correct pins in h-bridge
 
 **Kind**: instance method of [<code>Intval</code>](#Intval)  
 <a name="Intval+_stop"></a>
 
 ### intval._stop()
-Intval._stop() - 
 Stop motor by setting both motor pins to 0 (LOW)
 
 **Kind**: instance method of [<code>Intval</code>](#Intval)  
 <a name="Intval+_watchMicro"></a>
 
 ### intval._watchMicro(err, val)
-Intval._watchMicro() - 
 Callback for watching relese switch state changes.
 Using GPIO 06 on Raspberry Pi Zero W.
 * If closed, start timer.
@@ -74,7 +68,6 @@ Microswitch + 10K ohm resistor
 <a name="Intval+_watchRelease"></a>
 
 ### intval._watchRelease(err, val)
-Intval._watchRelease() - 
 Callback for watching relese switch state changes.
 Using GPIO 05 on Raspberry Pi Zero W.
 
@@ -97,7 +90,6 @@ Button + 10K ohm resistor
 <a name="Intval+frame"></a>
 
 ### intval.frame([dir], [time], [delay])
-Intval.frame() -
 Begin a single frame with set variables or defaults
 
 **Kind**: instance method of [<code>Intval</code>](#Intval)  

lib/intval/index.js

@@ -55,7 +55,6 @@ class Intval {
 		process.on('SIGINT', this._undeclarePins)
 	}
 	/**
-	* Intval._declarePins() - 
 	* (internal function) Declares all Gpio pins that will be used
 	*
 	*/
@@ -69,8 +68,7 @@ class Intval {
 		console.dir(this._pin)
 		this._pin.release.watch(this._watchRelease)
 	}
-	/**
+	/** 
-	* Intval._undeclarePins() - 
 	* (internal function) Undeclares all Gpio in event of uncaught error
 	* that interupts the node process
 	*
@@ -82,7 +80,6 @@ class Intval {
 		this._pin.release.unexport()
 	}
 	/**
-	* Intval._startFwd() - 
 	* Start motor in forward direction by setting correct pins in h-bridge
 	*
 	*/
@@ -92,7 +89,6 @@ class Intval {
 		//start high-cpu watch
 	}
 	/**
-	* Intval._startBwd() - 
 	* Start motor in backward direction by setting correct pins in h-bridge
 	*
 	*/
@@ -100,8 +96,7 @@ class Intval {
 		this._pin.fwd.set(0)
 		this._pin.bwd.set(1)
 	}
-	/**
+	/** 
-	* Intval._stop() - 
 	* Stop motor by setting both motor pins to 0 (LOW)
 	*
 	*/
@@ -117,7 +112,6 @@ class Intval {
 		this._state.frame.active = false
 	}
 	/**
-	* Intval._watchMicro() - 
 	* Callback for watching relese switch state changes.
 	* Using GPIO 06 on Raspberry Pi Zero W.
 	* * If closed, start timer.
@@ -140,7 +134,6 @@ class Intval {
 		//determine when to stop
 	}
 	/**
-	* Intval._watchRelease() - 
 	* Callback for watching relese switch state changes.
 	* Using GPIO 05 on Raspberry Pi Zero W.
 	*
@@ -191,7 +184,6 @@ class Intval {
 		this._state.dir = val
 	} 
 	/**
-	* Intval.frame() -
 	* Begin a single frame with set variables or defaults
 	*
 	* @param {?boolean} 	[dir="null"] 		(optional) Direction of the frame

lib/onoffsim/Readme.md

@@ -7,7 +7,6 @@ Object representing a fake onoff Gpio class
 <a name="onoffsim.Gpio"></a>
 
 ### onoffsim.Gpio(no, dir, additional) ⇒ <code>object</code>
-Gpio() - 
 Returns a Gpio class in the case of running on a dev machine
 
 **Kind**: static method of [<code>onoffsim</code>](#onoffsim)  

lib/onoffsim/index.js

@@ -3,7 +3,6 @@
 /** Object representing a fake onoff Gpio class */
 const onoffsim = {
 	/**
-	* Gpio() - 
 	* Returns a Gpio class in the case of running on a dev machine
 	*
 	* @param {integer}	no 			Number of the GPIO pin

lib/wifi/Readme.md

@@ -17,7 +17,6 @@ Class representing the wifi features
 <a name="Wifi+list"></a>
 
 ### wifi.list(callback)
-Wifi.list() - 
 List available wifi access points
 
 **Kind**: instance method of [<code>Wifi</code>](#Wifi)  
@@ -29,7 +28,6 @@ List available wifi access points
 <a name="Wifi+_readConfigCb"></a>
 
 ### wifi._readConfigCb(err, data)
-Wifi._readConfigCb() -
 (internal function) Invoked after config file is read, 
 then invokes file write on the config file
 
@@ -43,7 +41,6 @@ then invokes file write on the config file
 <a name="Wifi+_writeConfigCb"></a>
 
 ### wifi._writeConfigCb(err)
-Wifi._writeConfigCb() -
 (internal function) Invoked after config file is written, 
 then executes reconfiguration command
 
@@ -56,7 +53,6 @@ then executes reconfiguration command
 <a name="Wifi+_reconfigureCb"></a>
 
 ### wifi._reconfigureCb(err, stdout, stderr)
-Wifi._reconfigureCb() - 
 (internal function) Invoked after reconfiguration command is complete
 
 **Kind**: instance method of [<code>Wifi</code>](#Wifi)  
@@ -70,7 +66,6 @@ Wifi._reconfigureCb() -
 <a name="Wifi+_refreshCb"></a>
 
 ### wifi._refreshCb(err, stdout, stderr)
-Wifi._refreshCb() - 
 (internal function) Invoked after wifi refresh command is complete
 
 **Kind**: instance method of [<code>Wifi</code>](#Wifi)  
@@ -84,7 +79,6 @@ Wifi._refreshCb() -
 <a name="Wifi+setNetwork"></a>
 
 ### wifi.setNetwork(ssid, pwd, callback)
-Wifi.setNetwork() - 
 Function which initializes the processes for adding a wifi access point authentication
 
 **Kind**: instance method of [<code>Wifi</code>](#Wifi)  
@@ -98,7 +92,6 @@ Function which initializes the processes for adding a wifi access point authenti
 <a name="Wifi+getNetwork"></a>
 
 ### wifi.getNetwork(callback)
-Wifi.getNetwork() - 
 Executes command which gets the currently connected network
 
 **Kind**: instance method of [<code>Wifi</code>](#Wifi)  

lib/wifi/index.js

@@ -20,7 +20,6 @@ class Wifi {
 		this._ssid = null
 	}
 	/**
-	* Wifi.list() - 
 	* List available wifi access points
 	*
 	* @param {function} 	callback 	Function which gets invoked after list is returned
@@ -45,7 +44,6 @@ class Wifi {
 		})
 	}
 	/**
-	* Wifi._readConfigCb() -
 	* (internal function) Invoked after config file is read, 
 	* then invokes file write on the config file
 	*
@@ -66,7 +64,6 @@ class Wifi {
 		fs.writeFile(filePath, data, 'utf8', this._writeConfigCb)
 	}
 	/**
-	* Wifi._writeConfigCb() -
 	* (internal function) Invoked after config file is written, 
 	* then executes reconfiguration command
 	*
@@ -80,7 +77,6 @@ class Wifi {
 		exec(reconfigure, this._reconfigureCb)
 	}
 	/**
-	* Wifi._reconfigureCb() - 
 	* (internal function) Invoked after reconfiguration command is complete
 	*
 	* @param {object} 	err 		(optional) Error object only present if configuration command fails
@@ -96,7 +92,6 @@ class Wifi {
 		exec(refresh, this._refreshCb)
 	}
 	/**
-	* Wifi._refreshCb() - 
 	* (internal function) Invoked after wifi refresh command is complete
 	*
 	* @param {object} 	err 		(optional) Error object only present if refresh command fails
@@ -113,7 +108,6 @@ class Wifi {
 		this._callback = () => {}
 	}
 	/**
-	* Wifi.setNetwork() - 
 	* Function which initializes the processes for adding a wifi access point authentication
 	*
 	* @param {string} 	ssid 		SSID of network to configure
@@ -127,7 +121,6 @@ class Wifi {
 		fs.readFile(filePath, 'utf8', this._readConfigCb)
 	}
 	/**
-	* Wifi.getNetwork() - 
 	* Executes command which gets the currently connected network
 	*
 	* @param {function} 	callback 	Function which is invoked after command is completed