213 lines
8.8 KiB
OpenSCAD
213 lines
8.8 KiB
OpenSCAD
|
module tube(o = 1, i = 0, h = 1, center = false, $fn = 12) {
|
|||
|
|
$fn = $fn;
|
|||
|
|
union () {
|
|||
|
|
difference () {
|
|||
|
|
cylinder(r = o, h = h, center = center);
|
|||
|
|
cylinder(r = i, h = h, center = center);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module rounded_cube (cube_arr = [1, 1, 1], d = 0, center = false) {
|
|||
|
|
off_x = 0;
|
|||
|
|
off_y = 0;
|
|||
|
|
r = d/2;
|
|||
|
|
union () {
|
|||
|
|
cube([cube_arr[0] - d, cube_arr[1], cube_arr[2]], center = center);
|
|||
|
|
cube([cube_arr[0], cube_arr[1] - d, cube_arr[2]], center = center);
|
|||
|
|
translate ([1 * (cube_arr[0] / 2) - r , 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
|||
|
|
translate ([-1 * (cube_arr[0] / 2) + r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
|||
|
|
translate ([1 * (cube_arr[0] / 2) - r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
|||
|
|
translate ([-1 * (cube_arr[0] / 2) + r, 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module c_battery () {
|
|||
|
|
/* C Cell battery, 26.1 × 50 */
|
|||
|
|
x = 26.1;
|
|||
|
|
x_fuzz = .3;
|
|||
|
|
y = 50;
|
|||
|
|
y_fuzz = 2;
|
|||
|
|
cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module sub_c_battery () {
|
|||
|
|
/* Sub C Cell battery, 22.2 × 42.9 */
|
|||
|
|
x = 22.2;
|
|||
|
|
x_fuzz = .3;
|
|||
|
|
y = 42.9;
|
|||
|
|
y_fuzz = 2;
|
|||
|
|
cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module hex (r = 1, h = 1, center = false) {
|
|||
|
|
cylinder(r = r, h = h, center = center, $fn = 6);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module triangle (a = 1, b = 1, c = 1, h = 1, center = false) {
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module cone_45 (d = 1, center = false) {
|
|||
|
|
cylinder(r1 = d/2, r2 = 0, h = d, center = center);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module decoys (d = 10, z = 0, number = 4, cube_size = 4, debug = false) {
|
|||
|
|
for (i = [0: number]) {
|
|||
|
|
rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size, cube_size, cube_size], center = true);
|
|||
|
|
if (debug && i == 0) {
|
|||
|
|
rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size * 5, cube_size* 5, cube_size], center = true);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
//////////////////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
// Paraboloid module for OpenScad
|
|||
|
|
//
|
|||
|
|
// Copyright (C) 2013 Lochner, Juergen
|
|||
|
|
// http://www.thingiverse.com/Ablapo/designs
|
|||
|
|
//
|
|||
|
|
// This program is free software. It is
|
|||
|
|
// licensed under the Attribution - Creative Commons license.
|
|||
|
|
// http://creativecommons.org/licenses/by/3.0/
|
|||
|
|
//////////////////////////////////////////////////////////////////////////////////////////////
|
|||
|
|
|
|||
|
|
module paraboloid (y=10, f=5, rfa=0, fc=1, detail=44){
|
|||
|
|
// y = height of paraboloid
|
|||
|
|
// f = focus distance
|
|||
|
|
// fc : 1 = center paraboloid in focus point(x=0, y=f); 0 = center paraboloid on top (x=0, y=0)
|
|||
|
|
// rfa = radius of the focus area : 0 = point focus
|
|||
|
|
// detail = $fn of cone
|
|||
|
|
|
|||
|
|
hi = (y+2*f)/sqrt(2); // height and radius of the cone -> alpha = 45° -> sin(45°)=1/sqrt(2)
|
|||
|
|
x =2*f*sqrt(y/f); // x = half size of parabola
|
|||
|
|
|
|||
|
|
translate([0,0,-f*fc]) // center on focus
|
|||
|
|
rotate_extrude(convexity = 10,$fn=detail ) // extrude paraboild
|
|||
|
|
translate([rfa,0,0]) // translate for fokus area
|
|||
|
|
difference(){
|
|||
|
|
union(){ // adding square for focal area
|
|||
|
|
projection(cut = true) // reduce from 3D cone to 2D parabola
|
|||
|
|
translate([0,0,f*2]) rotate([45,0,0]) // rotate cone 45° and translate for cutting
|
|||
|
|
translate([0,0,-hi/2])cylinder(h= hi, r1=hi, r2=0, center=true, $fn=detail); // center cone on tip
|
|||
|
|
translate([-(rfa+x ),0]) square ([rfa+x , y ]); // focal area square
|
|||
|
|
}
|
|||
|
|
translate([-(2*rfa+x ), -1/2]) square ([rfa+x ,y +1] ); // cut of half at rotation center
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
//Spiral Notes
|
|||
|
|
//-------------------------------------------------------------------
|
|||
|
|
//Height = center to center height of the end spheres which form the spirals. Ends will need to be flattened by the user as desired. Actual height of the rendering is Height+2*baseRadius
|
|||
|
|
//Radius = the maximum distance from the axis of the spiral (the z axis) to the center of the sphere(s) forming the spiral
|
|||
|
|
//baseRadius = cross sectional radius of the spiral
|
|||
|
|
//frequency = the number of complete revolutions about the axis made by the spiral, whole numbers will result in spirals whose tops end directly above their bases
|
|||
|
|
//resolution = integer number of spheres, not to be confused with $fn. The greater the number of spheres, the smoother the spiral will be (also longer render times!). Recommended that this number be 8*frequency or greater.
|
|||
|
|
//numSpirals = integer number of spirals used in the spiralMulti modules spaced evenly around the axis (3 spirals are spaced 120 degrees apart, 4 spirals: 90 degrees apart, etc.)
|
|||
|
|
|
|||
|
|
//Instructions
|
|||
|
|
//------------------------------------------------------------------
|
|||
|
|
//1. Place spiral.scad in the "libraries" folder of your openscad installation. Find the libraries folder by File -> Show Library Folder...
|
|||
|
|
//2. Then create a new or open one of your existing scad files and include spiral.scad with the following code:
|
|||
|
|
//use<spiral.scad>;
|
|||
|
|
//3. Then call the modules in your files with code similar to the following:
|
|||
|
|
//spiral(20,20,3,1,25);
|
|||
|
|
//spiralCone(20,20,3,1,25);
|
|||
|
|
//spiralEllipse(20,20,3,1,25);
|
|||
|
|
//spiralMulti(20,20,3,1,25,3);
|
|||
|
|
//spiralMultiCone(20,20,3,1,25,3);
|
|||
|
|
//spiralMultiEllipse(40,60,3,1,32,3);
|
|||
|
|
|
|||
|
|
//-------------------------------------------------------------
|
|||
|
|
//simple spiral
|
|||
|
|
module spiral (height = 20, Radius = 20, baseRadius = 3, frequency = 1, resolution = 25, $fn=50) {
|
|||
|
|
union(){
|
|||
|
|
translate ([0,0,-(height/2)]) {
|
|||
|
|
for(i=[0:resolution-2]){
|
|||
|
|
hull(){
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
//cone spiral
|
|||
|
|
module spiralCone(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25, $fn=50) {
|
|||
|
|
union(){
|
|||
|
|
translate ([0,0,-(height/2)]) {
|
|||
|
|
for(i=[0:resolution-2]){
|
|||
|
|
hull(){
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius-(i-1)*Radius/resolution,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius-i*Radius/resolution,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
//ellipse spiral
|
|||
|
|
module spiralEllipse(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25, $fn=50) {
|
|||
|
|
union(){
|
|||
|
|
translate ([0,0,-(height/2)]) {
|
|||
|
|
for(i=[0:resolution-2]){
|
|||
|
|
hull(){
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius*sqrt(1-(i/(resolution-1)*(i/(resolution-1)))),0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius*sqrt(1-((i+1)/(resolution-1)*((i+1)/(resolution-1)))),0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
// Multiple spirals arranged radially around the axis
|
|||
|
|
module spiralMulti(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
|
|||
|
|
shiftAngle=360/numSpirals;
|
|||
|
|
for(total=[0:numSpirals-1]) {
|
|||
|
|
union(){
|
|||
|
|
translate ([0,0,-(height/2)]) {
|
|||
|
|
for(i=[0:resolution-2]){
|
|||
|
|
hull(){
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
// Multiple spirals arranged radially around the axis tapering in towards the axis
|
|||
|
|
module spiralMultiCone(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
|
|||
|
|
shiftAngle=360/numSpirals;
|
|||
|
|
for(total=[0:numSpirals-1]) {
|
|||
|
|
union(){
|
|||
|
|
translate ([0,0,-(height/2)]) {
|
|||
|
|
for(i=[0:resolution-2]){
|
|||
|
|
hull(){
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius-(i-1)*Radius/resolution,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius-i*Radius/resolution,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
//multiple ellipse spiral
|
|||
|
|
module spiralMultiEllipse(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
|
|||
|
|
shiftAngle=360/numSpirals;
|
|||
|
|
for(total=[0:numSpirals-1]) {
|
|||
|
|
union(){
|
|||
|
|
translate ([0,0,-(height/2)]) {
|
|||
|
|
for(i=[0:resolution-2]){
|
|||
|
|
hull(){
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius*sqrt(1-(i/(resolution-1)*(i/(resolution-1)))),0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
|
|||
|
|
rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius*sqrt(1-((i+1)/(resolution-1)*((i+1)/(resolution-1)))),0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|