409 lines
9.1 KiB
C++
409 lines
9.1 KiB
C++
boolean debug_state = false;
|
|
|
|
//Can be controlled via serial
|
|
//Buttons are optional
|
|
//Exposure controls assumes use of a 120RPM motor
|
|
//Uses L298N H-bridge breakout board
|
|
//Target board is an Adafruit Metro Mini,
|
|
//also using an Uno as a dev board
|
|
|
|
/*
|
|
----------------------------------------------------
|
|
Microswitch (use INPUT_PULLUP!!)
|
|
GND-----\ | \-----PIN
|
|
----------------------------------------------------
|
|
*/
|
|
|
|
const int MOTOR_RPM = 120;
|
|
const int BOLEX_C = round((133 / (1.66 * 360)) * 1000); //bolex exposure constant
|
|
const int FAST_PWM = 255;
|
|
const int SLOW_PWM = 127;
|
|
|
|
/* ------------------------------------------------
|
|
* pins
|
|
* ------------------------------------------------*/
|
|
//Adafruit Metro Mini
|
|
const int PIN_INDICATOR = 13;
|
|
const int PIN_MOTOR_FORWARD = 9;
|
|
const int PIN_MOTOR_BACKWARD = 10;
|
|
const int PIN_MICRO = 19; //laser cut version
|
|
const int BUTTON[4] = {3, 6, 5, 4}; //trigger, direction, speed, delay
|
|
|
|
/* ------------------------------------------------
|
|
* loop
|
|
* ------------------------------------------------*/
|
|
const int LOOP_DELAY = 10;
|
|
|
|
/* ------------------------------------------------
|
|
* state
|
|
* ------------------------------------------------*/
|
|
volatile int button_state[4] = {1, 1, 1, 1};
|
|
volatile long button_time[4] = {0, 0, 0, 0};
|
|
volatile long buttontime = 0;
|
|
|
|
volatile boolean sequence = false;
|
|
volatile boolean running = false;
|
|
volatile boolean cam_dir = true;
|
|
volatile boolean delaying = false;
|
|
volatile boolean timed = false;
|
|
|
|
volatile int counter = 0;
|
|
|
|
volatile int micro_position = 0;
|
|
volatile boolean micro_primed = false;
|
|
|
|
unsigned long timer = 0;
|
|
unsigned long frame_start = 0;
|
|
unsigned long delay_start = 0;
|
|
|
|
String timed_str = "600";
|
|
unsigned long timed_val = 600;
|
|
unsigned long timed_open = 300; //ms after start_frame to pause
|
|
volatile boolean timed_paused = false;
|
|
unsigned long timed_delay = 0;
|
|
unsigned long timed_last = 0;
|
|
unsigned long timed_avg = 600;
|
|
|
|
volatile int fwd_speed = FAST_PWM;
|
|
volatile int bwd_speed = FAST_PWM;
|
|
|
|
volatile long seq_delay = 42;
|
|
|
|
/* ------------------------------------------------
|
|
* serial
|
|
* ------------------------------------------------*/
|
|
|
|
const char cmd_camera = 'c'; //Trigger the camera to advance or rewind 1 frame
|
|
const char cmd_cam_forward = 'e'; //Set camera direction to FORWARDS
|
|
const char cmd_cam_backward = 'f'; //Set camera direction to BACKWARDS
|
|
const char cmd_timed = 'n'; //Set camera exposure time: follow command immediately with number of millisecions, ie: 1000
|
|
|
|
const char cmd_debug = 'd'; //Turn on debug messages, will break mcopy firmware
|
|
const char cmd_connect = 'i'; //Confirm firmware on Arduino
|
|
volatile char cmd_char = 'z'; //Default null command
|
|
const char cmd_mcopy_identifier = 'm'; //Incoming identification char for mcopy use only
|
|
const char cmd_cam_identifier = 'k'; //Response char for identifying device as camera
|
|
|
|
const int serialDelay = 5;
|
|
|
|
void setup() {
|
|
Serial_init();
|
|
Pins_init();
|
|
Buttons_init();
|
|
}
|
|
|
|
void loop() {
|
|
if (Serial.available()) {
|
|
/* read the most recent byte */
|
|
cmd_char = (char)Serial.read();
|
|
}
|
|
if (cmd_char != 'z') {
|
|
cmd(cmd_char);
|
|
cmd_char = 'z';
|
|
}
|
|
timer = millis();
|
|
Btn(0);
|
|
Btn(1);
|
|
Btn(2);
|
|
Btn(3);
|
|
if (sequence && delaying) {
|
|
Watch_delay();
|
|
}
|
|
|
|
if (running) {
|
|
if (timed) {
|
|
Read_timed();
|
|
} else {
|
|
Read_micro();
|
|
}
|
|
}
|
|
if (!running && !sequence && !delaying){
|
|
delay(LOOP_DELAY);
|
|
}
|
|
}
|
|
|
|
void cmd (char val) {
|
|
if (val == cmd_debug) {
|
|
debug();
|
|
} else if (val == cmd_connect) {
|
|
connect();
|
|
} else if (val == cmd_mcopy_identifier) {
|
|
identify();
|
|
} else if (val == cmd_camera) {
|
|
Frame();
|
|
} else if (val == cmd_cam_forward) {
|
|
cam_direction(true); //explicit
|
|
} else if (val == cmd_cam_backward) {
|
|
cam_direction(false);
|
|
} else if (val == cmd_timed) {
|
|
timedString();
|
|
}
|
|
}
|
|
|
|
void debug () {
|
|
debug_state = true;
|
|
Serial.println(cmd_debug);
|
|
log("debugging enabled");
|
|
}
|
|
|
|
void connect () {
|
|
Serial.println(cmd_connect);
|
|
log("connect()");
|
|
}
|
|
|
|
void identify () {
|
|
Serial.println(cmd_cam_identifier);
|
|
log("identify()");
|
|
}
|
|
|
|
//sending "0" will reset to default exposure time
|
|
void timedString () {
|
|
while (Serial.available() == 0) {
|
|
//Wait for timed string
|
|
}
|
|
timed_str = Serial.readString();
|
|
timed_val = timed_str.toInt();
|
|
if (timed_val < 600) {
|
|
timed_val = 600;
|
|
timed_str = "600";
|
|
timed = false;
|
|
} else {
|
|
timed_delay = timed_val - BOLEX_C;
|
|
timed = true;
|
|
}
|
|
Serial.println(cmd_timed);
|
|
log("Set exposure time to: ");
|
|
log(timed_str);
|
|
}
|
|
|
|
void Serial_init () {
|
|
Serial.begin(57600);
|
|
Serial.flush();
|
|
Serial.setTimeout(serialDelay);
|
|
}
|
|
|
|
void Pins_init () {
|
|
pinMode(PIN_MOTOR_FORWARD, OUTPUT);
|
|
pinMode(PIN_MOTOR_BACKWARD, OUTPUT);
|
|
pinMode(PIN_MICRO, INPUT_PULLUP);
|
|
pinMode(PIN_INDICATOR, OUTPUT);
|
|
}
|
|
|
|
void Buttons_init () {
|
|
for (int i = 0; i < 4; i++) {
|
|
pinMode(BUTTON[i], INPUT_PULLUP);
|
|
}
|
|
}
|
|
|
|
void Btn (int index) {
|
|
int val = digitalRead(BUTTON[index]);
|
|
if (val != button_state[index]) {
|
|
if (val == LOW) { // pressed
|
|
button_time[index] = millis();
|
|
//button_start(index);
|
|
} else if (val == HIGH) { // not pressed
|
|
buttontime = millis() - button_time[index];
|
|
button_end(index, buttontime);
|
|
}
|
|
}
|
|
button_state[index] = val;
|
|
}
|
|
|
|
/*
|
|
* dormant for now
|
|
* void button_start (int index) {
|
|
if (index == 0) {
|
|
}
|
|
}*/
|
|
|
|
void button_end (int index, long buttontime) {
|
|
if (index == 0) {
|
|
if (buttontime > 1000) {
|
|
if (!sequence) {
|
|
sequence = true;
|
|
Output(2, 75);
|
|
Frame();
|
|
}
|
|
} else {
|
|
if (sequence) {
|
|
sequence = false;
|
|
//Output(2, 75);
|
|
} else {
|
|
Frame();
|
|
}
|
|
}
|
|
} else if (index == 1) { //set direction
|
|
if (buttontime < 1000) {
|
|
cam_dir = true;
|
|
Output(1, 500);
|
|
} else if (buttontime > 1000) {
|
|
cam_dir = false;
|
|
Output(2, 250);
|
|
}
|
|
} else if (index == 2) { // set speed
|
|
if (buttontime >= 1000) {
|
|
timed_delay = buttontime - BOLEX_C;
|
|
timed = true;
|
|
Output(2, 250);
|
|
} else if (buttontime < 1000) {
|
|
timed_delay = 0;
|
|
timed = false;
|
|
Output(1, 500);
|
|
}
|
|
} else if (index == 3) { //set delay
|
|
if (buttontime < 42) {
|
|
seq_delay = 42;
|
|
Output(1, 500);
|
|
} else {
|
|
seq_delay = buttontime;
|
|
Output(2, 250);
|
|
}
|
|
}
|
|
buttontime = 0;
|
|
}
|
|
|
|
void Indicator (boolean state) {
|
|
if (state) {
|
|
digitalWrite(PIN_INDICATOR, HIGH);
|
|
} else {
|
|
digitalWrite(PIN_INDICATOR, LOW);
|
|
}
|
|
}
|
|
|
|
void Output (int number, int len) {
|
|
for (int i = 0; i < number; i++) {
|
|
Indicator(true);
|
|
delay(len);
|
|
Indicator(false);
|
|
delay(42);
|
|
}
|
|
}
|
|
|
|
void Frame () {
|
|
frame_start = millis();
|
|
if (cam_dir) {
|
|
analogWrite(PIN_MOTOR_FORWARD, fwd_speed);
|
|
analogWrite(PIN_MOTOR_BACKWARD, 0);
|
|
} else {
|
|
analogWrite(PIN_MOTOR_BACKWARD, bwd_speed);
|
|
analogWrite(PIN_MOTOR_FORWARD, 0);
|
|
}
|
|
running = true;
|
|
micro_primed = false;
|
|
}
|
|
|
|
boolean Read_delay () {
|
|
if (fwd_speed == FAST_PWM) {
|
|
if (timer - frame_start >= 300) {
|
|
return true;
|
|
}
|
|
} else {
|
|
if (timer - frame_start >= 600) {
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void Watch_delay () {
|
|
if (timer - delay_start >= seq_delay) {
|
|
delaying = false;
|
|
Frame();
|
|
}
|
|
}
|
|
|
|
void Read_timed () {
|
|
if (!timed_paused) {
|
|
if (timer - frame_start > timed_open
|
|
&& timer - frame_start < timed_open + timed_delay) {
|
|
Pause_timed();
|
|
} else if (timer - frame_start > timed_open + timed_delay) {
|
|
micro_position = digitalRead(PIN_MICRO);
|
|
if (micro_position == HIGH) {
|
|
Stop();
|
|
}
|
|
delay(2);//smooths out signal
|
|
}
|
|
}
|
|
if (timed_paused && timer - frame_start > timed_open + timed_delay) {
|
|
Start_timed();
|
|
}
|
|
}
|
|
|
|
void Pause_timed () {
|
|
timed_paused = true;
|
|
analogWrite(PIN_MOTOR_FORWARD, 0);
|
|
analogWrite(PIN_MOTOR_BACKWARD, 0);
|
|
}
|
|
|
|
void Start_timed () {
|
|
timed_paused = false;
|
|
if (cam_dir) {
|
|
analogWrite(PIN_MOTOR_FORWARD, fwd_speed);
|
|
analogWrite(PIN_MOTOR_BACKWARD, 0);
|
|
} else {
|
|
analogWrite(PIN_MOTOR_BACKWARD, bwd_speed);
|
|
analogWrite(PIN_MOTOR_FORWARD, 0);
|
|
}
|
|
}
|
|
|
|
void Read_micro () {
|
|
if (Read_delay()) {
|
|
micro_position = digitalRead(PIN_MICRO);
|
|
if (micro_position == LOW
|
|
&& micro_primed == false) {
|
|
micro_primed = true;
|
|
} else if (micro_position == HIGH
|
|
&& micro_primed == true) {
|
|
Stop();
|
|
}
|
|
delay(2);//smooths out signal
|
|
}
|
|
}
|
|
|
|
void Stop () {
|
|
delay(10);
|
|
analogWrite(PIN_MOTOR_FORWARD, 0);
|
|
analogWrite(PIN_MOTOR_BACKWARD, 0);
|
|
|
|
running = false;
|
|
micro_primed = false;
|
|
|
|
if (cam_dir) {
|
|
counter += 1;
|
|
} else {
|
|
counter -= 1;
|
|
}
|
|
|
|
timed_last = timer - frame_start;
|
|
|
|
timed_avg = (timed_avg + timed_last) / 2;
|
|
|
|
Serial.println(cmd_camera);
|
|
log("Frame completed");
|
|
log(String(timed_last));
|
|
if (sequence) {
|
|
delaying = true;
|
|
delay_start = millis();
|
|
}
|
|
}
|
|
|
|
void cam_direction (boolean state) {
|
|
cam_dir = state;
|
|
if (state) {
|
|
timed_open = 300;
|
|
Serial.println(cmd_cam_forward);
|
|
log("cam_direction -> true");
|
|
} else {
|
|
timed_open = 400;
|
|
Serial.println(cmd_cam_backward);
|
|
log("cam_direction -> false");
|
|
}
|
|
}
|
|
void log (String msg) {
|
|
if (debug_state) {
|
|
Serial.println(msg);
|
|
}
|
|
}
|
|
|