403 lines
13 KiB
OpenSCAD
403 lines
13 KiB
OpenSCAD
include <../readyCAD/ready.scad>
|
|
|
|
mm_x = [54.5 + 6, -30 + 54.5, 6, 45.5, 18, 55, 55];
|
|
mm_y = [-30 + 12, 7 + 12, -27.5, -27.5, 7, 40, 40];
|
|
|
|
//xArray = [-3, 57, 55, 10, -26]; //WITH MIDDLE PIN
|
|
//yArray = [38, 31, -56, -22, -33]; //WITH MIDDLE PIN
|
|
xArray = [-3, 57, 55, -26]; //NO MIDDLE PIN
|
|
yArray = [38, 31, -56, -33]; //NO MIDDLE PIN
|
|
|
|
outerD = 9;
|
|
innerD = 4.5;
|
|
height = 17;
|
|
|
|
//panel_x = 129 + 4;
|
|
//panel_y = 131;
|
|
panel_2_x = 110;
|
|
panel_2_y = 110;
|
|
|
|
one_to_one_x = 54.5;
|
|
one_to_one_y = 12;
|
|
|
|
bolt_inner = 2.7;
|
|
|
|
module intval_panel () {
|
|
difference () {
|
|
union () {
|
|
difference () {
|
|
translate ([0, 0, 8.5]) {
|
|
union () {
|
|
translate([22, -5, 0]) rotate([0, 0, -13]) rounded_cube([panel_2_x, panel_2_y, 2], d = 20, c = true);
|
|
//reinforces
|
|
translate([54, -12, -3]) rotate([0, 0, 89]) rounded_cube([110, 20, 4], 20, c = true);
|
|
translate([-17, 2, -3]) rotate([0, 0, 72]) rounded_cube([94, 13, 4], 13, c = true);
|
|
}
|
|
}
|
|
for (i = [0 : len(xArray) - 1]) {
|
|
bolex_pin_inner(xArray[i], yArray[i]);
|
|
}
|
|
}
|
|
onetoone(26, 10, 4.5);
|
|
//extends for onetoone
|
|
intval_pins();
|
|
for (i = [0 : len(mm_x) - 1]) {
|
|
translate([mm_x[i], mm_y[i], 6]) cylinder(r = 4, h = 5, center = true);
|
|
}
|
|
|
|
}
|
|
onetoone(9, 14, 8.5);
|
|
bearing(54.5, 12, 6, width= 18, hole=false);
|
|
frame_counter_access();
|
|
m_p_access();
|
|
//remove center
|
|
difference () {
|
|
//translate([19, -5, 0]) cube([60, 60, 60], center=true);
|
|
//translate([49, 0, 0]) rotate([0, 0, -165]) cube([30, 90, 60], center=true);
|
|
}
|
|
//remove front
|
|
remove_front();
|
|
//opto
|
|
//opto_mount_holes(42, 29.5, 20, 5.4);
|
|
translate([6, 18, 0]) rotate([0, 0, -13]) cube([15, 25, 40], center=true); //motor wind key hole
|
|
|
|
for (i = [0 : len(mm_x) - 1]) {
|
|
translate([mm_x[i], mm_y[i], 0]) cylinder(r = bolt_inner, h = 100, center = true);
|
|
}
|
|
}
|
|
}
|
|
module remove_front () {
|
|
|
|
translate([87, 0, 4]) rotate([0, 0, 89]) cube([170, 40, 40], center = true);
|
|
}
|
|
module onetoone (size, height, z) {
|
|
translate ([one_to_one_x, one_to_one_y, z]) {
|
|
cylinder(r = size / 2, h = height, center = true);
|
|
}
|
|
}
|
|
module m_p_access () {
|
|
translate ([18, -44, 0]) {
|
|
rounded_cube([35, 17, 50], 17, true);
|
|
}
|
|
}
|
|
module bolex_pin (x, y) {
|
|
in = innerD;
|
|
translate ([x, y, 1]) {
|
|
difference () {
|
|
union () {
|
|
translate([0, 0, (height / 2) - 2]) cylinder(r = (outerD + 4) / 2, h = 4, center = true);
|
|
cylinder(r = outerD / 2, h = height, center = true);
|
|
}
|
|
cylinder(r = in / 2, h = height, center = true);
|
|
translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
|
|
}
|
|
}
|
|
}
|
|
module bolex_pin_inner (x, y) {
|
|
translate ([x, y, 1]) {
|
|
cylinder(r = innerD / 2, h = height * 2, center = true);
|
|
translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
|
|
}
|
|
}
|
|
module intval_pins () {
|
|
for (i = [0 : len(xArray) - 1]) {
|
|
bolex_pin(xArray[i], yArray[i]);
|
|
}
|
|
}
|
|
module key () {
|
|
difference () {
|
|
cylinder(r = 6.7 / 2, h = 5, center = true, $fn = 15);
|
|
cylinder(r = 4.76 / 2, h = 5, center = true, $fn = 15);
|
|
}
|
|
translate ([0, 0, -7.5]) {
|
|
cylinder(r = 6.7 / 2, h = 10, center = true, $fn = 15);
|
|
}
|
|
}
|
|
module keyHole () {
|
|
translate ([0, 0, 1.75]) {
|
|
cube([10, 2, 3.5], center = true);
|
|
}
|
|
}
|
|
module key_end (rotArr = [0, 0, 0], transArr = [0, 0, 0]) {
|
|
translate(transArr) {
|
|
rotate (rotArr) {
|
|
difference () {
|
|
key();
|
|
keyHole();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
module frame_counter_access () {
|
|
x = 37.5;
|
|
y = 39;
|
|
translate([x, y, 8.5]) {
|
|
difference () {
|
|
union () {
|
|
rotate ([0, 0, 19]) {
|
|
translate([0, 9, 0]) {
|
|
cube([12, 16, 4], center = true);
|
|
}
|
|
}
|
|
rotate ([0, 0, -19]) {
|
|
translate([0, 9, 0]) {
|
|
cube([12, 16, 4], center = true);
|
|
}
|
|
}
|
|
}
|
|
translate([0, 15.5, 0]) {
|
|
cube([17, 6, 4], center = true);
|
|
}
|
|
}
|
|
cylinder(r = 6.2, h = 4, center = true);
|
|
}
|
|
}
|
|
module bearing (x, y, z, width= 8, hole = true) {
|
|
innerD = 8.05;
|
|
outerD = 22.1;
|
|
fuzz = 0.1;
|
|
translate ([x, y, z]) {
|
|
difference () {
|
|
cylinder(r = outerD / 2 + fuzz, h = width, center = true);
|
|
if (hole) {
|
|
cylinder(r = innerD / 2 - fuzz, h = width, center = true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
module motor_key (half = false) {
|
|
innerD = 7.85;
|
|
outer_d = 27.5 + 2;
|
|
notch_d = 10;
|
|
height = 7 + 5;
|
|
diff = 14 + 2.5;
|
|
difference () {
|
|
union () {
|
|
translate([one_to_one_x, one_to_one_y, 12.1]) cylinder(r = 12 / 2, h = 5, center = true);// padding against bearing
|
|
translate([one_to_one_x, one_to_one_y, diff]) cylinder(r=outer_d/2, h= height, center= true); //large cylinder
|
|
translate([one_to_one_x, one_to_one_y, 6]) cylinder(r=innerD/2, h= 10, center= true , $fn= 10);
|
|
key_end([0, 180, 0], [one_to_one_x, one_to_one_y, -2.5]); //thicker-than-key_end cylinder for inner bearing
|
|
}
|
|
translate([one_to_one_x, one_to_one_y, diff]) {
|
|
translate ([-outer_d/2 - 2.5, 0, 0]) cylinder(r=notch_d/2, h= height, center= true, $fn=30); //notch
|
|
}
|
|
translate([one_to_one_x, one_to_one_y, diff]) {
|
|
translate ([-outer_d/2 -.5, -3.5, 0]) rotate([0, 0, 100]) cube([15, 5, height], center = true); // smooth notch
|
|
translate ([-outer_d/2 -.5, 3.5, 0]) rotate([0, 0, -100]) cube([15, 5, height], center = true); // smooth notch
|
|
}
|
|
//slot for hobbled(?) end
|
|
translate([one_to_one_x, one_to_one_y, 20.5]) cylinder(r = 11.5/2, h = 10, center = true);
|
|
translate([one_to_one_x, one_to_one_y, 17.5]) {
|
|
difference() {
|
|
//cylinder(r = 7.5/2, h = 2, center = true);
|
|
//translate([5, 0, 0]) cube([10, 10, 10], center = true);
|
|
}
|
|
}
|
|
if (half) {
|
|
translate([one_to_one_x - 50 , one_to_one_y, -50]) cube([100, 100, 200]);
|
|
}
|
|
}
|
|
}
|
|
module motor_12v () {
|
|
motor_d = 37;
|
|
motor_h = 63;
|
|
end = 11.5;
|
|
len = 17;
|
|
cylinder(r = motor_d/2, h = motor_h, center=true);
|
|
translate([0, 0, (motor_h / 2) + (len / 2)]) cylinder(r = end/2, h = len, center=true);
|
|
}
|
|
module motor_mount () {
|
|
base_d = 45;
|
|
base_inner = 39;
|
|
base_thickness = 3;
|
|
hole_d = 13.5;
|
|
screw_d = 5;
|
|
height = 6;
|
|
difference () {
|
|
difference () {
|
|
translate([0, 0, 2.5])cylinder(r=base_d/2, h=height + 5, center = true);
|
|
translate([0, 0, base_thickness + 2.5]) cylinder(r=base_inner/2, h=height + 5, center = true);
|
|
}
|
|
|
|
cylinder(r=hole_d/2, h=29, center = true); //center hole
|
|
|
|
//screw mounts
|
|
translate([0, 12.5, 0]) cylinder(r=screw_d/2, h=29, center = true);
|
|
translate([0, -12.5, 0]) cylinder(r=screw_d/2, h=29, center = true);
|
|
//translate([10.5, 0, 0]) cylinder(r=screw_d/2, h=29, center = true);
|
|
//translate([0, 0, -10]) cube([100, 100, 100]);
|
|
}
|
|
//wings
|
|
//translate([-18, 0, 0]) cube([6, 4, 4], center= true);
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[0], mm_y[0], 0], 100, height, 9);
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[1], mm_y[1], 0], -10, height, 11);
|
|
}
|
|
|
|
module geared_motor_mount () {
|
|
base_d = 45;
|
|
base_inner = 39;
|
|
base_thickness = 3;
|
|
hole_d = 12.5;
|
|
screw_d = 4;
|
|
screw_distance = 31;
|
|
height = 6;
|
|
difference () {
|
|
difference () {
|
|
translate([0, 0, 2.5])cylinder(r=base_d/2, h=height + 5, center = true);
|
|
translate([0, 0, base_thickness + 2.5]) cylinder(r=base_inner/2, h=height + 5, center = true);
|
|
}
|
|
|
|
cylinder(r=hole_d/2, h=29, center = true); //center hole
|
|
|
|
//screw holes
|
|
translate([0, screw_distance/2, 0]) cylinder(r=screw_d/2, h=29, center = true);
|
|
translate([0, -screw_distance/2, 0]) cylinder(r=screw_d/2, h=29, center = true);
|
|
//translate([10.5, 0, 0]) cylinder(r=screw_d/2, h=29, center = true);
|
|
//translate([0, 0, -10]) cube([100, 100, 100]);
|
|
}
|
|
//wings
|
|
//translate([-18, 0, 0]) cube([6, 4, 4], center= true);
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[0], mm_y[0], 0], 100, height, 9);
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[1], mm_y[1], 0], -10, height, 11);
|
|
}
|
|
|
|
module motor_mount_bottom () {
|
|
mount_d = 45.5;
|
|
base_d = 45.5;
|
|
outer_d = 28 + 2.3 + 4;
|
|
height = 19 + 3.5 + 4;
|
|
bolt_h = 22.3;
|
|
shelf_h = 6; //match to motor_mount
|
|
|
|
module motor_mount_core () {
|
|
translate ([one_to_one_x, one_to_one_y, (height / 2 ) + 5.75]) {
|
|
difference() {
|
|
cylinder(r = mount_d / 2, h = height, center = true); //main block
|
|
|
|
translate([0, 0, (height / 2) - (shelf_h / 2)]) cylinder(r = base_d / 2, h = shelf_h, center = true); //shelf for motor_mount
|
|
cylinder(r = outer_d / 2, h = 50, center = true); //space for spinning
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) remove_front(); //flatten side
|
|
translate([-32, -17, -19]) cube([40, 40, 40], center= true); //hole for notch
|
|
translate([-42, 0, -19]) rotate([0, 0, -39]) cube([40, 40, 40], center= true); //hole for notch
|
|
translate([2.5, 19.5, 0]) cylinder(r=9/2, h = 60, center=true); // hole for panel bolt
|
|
//wings negative
|
|
//translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[0], mm_y[0], (height / 2) - (shelf_h / 2)], 100, shelf_h, 10, false);
|
|
//translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[1], mm_y[1], (height / 2) - (shelf_h / 2)], -42, shelf_h, 10, false);
|
|
}
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[0], mm_y[0], -shelf_h / 2], 100, height - shelf_h, 9);
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[1] , mm_y[1], -shelf_h / 2], -10, height - shelf_h, 11);
|
|
translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[5] , mm_y[5], -shelf_h / 2], -90, height - shelf_h, 11);
|
|
}
|
|
}
|
|
|
|
module microswitch_holder () {
|
|
difference () {
|
|
translate([29, -1, 14]) cube([36, 65, height - shelf_h - 4], center = true);//Base shape
|
|
translate ([25.5, -14, 15]) {
|
|
cube([17, 28, 39.5], center = true); //rectangle hole for center
|
|
translate([4.5, 5.6, 0]) rotate([0, 0, -23]) cube([17, 25, 39.5], center = true); //bottom right inner
|
|
translate([-2, -18, -3.5]) cube([7, 11, 12], center = true); // hole for bottom pins
|
|
translate([-9.5, -1, -3.5]) cube([30, 4, 12], center = true); //hole for side pin
|
|
}
|
|
translate ([14, 37.5, 15]) rotate([0, 0, 44]) cube([55, 30, 30], center= true); //top left outer
|
|
translate ([one_to_one_x, one_to_one_y, 18]) {
|
|
cylinder(r = outer_d / 2, h = 50, center = true); //space for spinning
|
|
}
|
|
translate ([32, 6, 15]) {
|
|
difference () {
|
|
translate([3, 0, 0]) rotate([0, 0, 0]) cube([20, 25, 39.5], center = true); //removes area for microswitch arm
|
|
translate([-2, 16, 0]) rotate([0, 0, -55]) cube([20, 50, 39.5], center = true);
|
|
}
|
|
}
|
|
translate ([58, -25, 15]) {
|
|
rotate([0, 0, 75]) cube([45, 30, 30], center= true); //bottom right outer
|
|
}
|
|
translate([mm_x[4], mm_y[4], 0]) cylinder(r = 6/2, h = 100, center = true); // extra bolt hole
|
|
translate([mm_x[1], mm_y[1], 0]) cylinder(r = 4, h = 100, center = true); //clear out top left bolt hole
|
|
}
|
|
}
|
|
|
|
module top_addition () {
|
|
|
|
}
|
|
motor_mount_core();
|
|
microswitch_holder();
|
|
bolt_holder([mm_x[2], mm_y[2], ((height - shelf_h)/ 2) + 3.75], 0, height - shelf_h - 4, 6); //bottom left mount
|
|
bolt_holder([mm_x[3], mm_y[3], ((height - shelf_h)/ 2) + 3.75], 180, height - shelf_h - 4, 6); //bottom right mount
|
|
//microswitch([25.5, -14, 15]);
|
|
}
|
|
module bolt_holder (position = [0, 0, 0], rotate_z = 0, h = 17, length = 4.5, hole = true) {
|
|
bolt_r = 6;
|
|
translate (position) {
|
|
difference () {
|
|
union() {
|
|
cylinder(r = bolt_r + 0, h = h, center = true);
|
|
rotate([0, 0, rotate_z]) translate([length/2, 0, 0]) cube([length, bolt_r * 2, h], center=true);
|
|
}
|
|
if (hole) {
|
|
cylinder(r = bolt_inner, h = h + 2, center = true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
module microswitch (position = [0, 0, 0], rotation = [0, 0, 0]) {
|
|
translate(position) {
|
|
rotate(rotation) {
|
|
cube([16, 28, 9.5], center = true);
|
|
translate([10, 8, 0]) rotate([0, 0, -7]) cube([1, 28, 4], center = true);
|
|
translate([8 + 7, 14 + 8, 0]) cylinder(r = 2.5, h = 4, center = true);
|
|
translate([0, -19, 0]) cube([6, 11, 9.5], center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module l289N_mount() {
|
|
DISTANCE = 38;
|
|
H = 8;
|
|
|
|
module stand () {
|
|
difference () {
|
|
cylinder(r1 = 5, r2 = 4, h = H, center = true);
|
|
cylinder(r = 2, h = H, center = true);
|
|
}
|
|
}
|
|
translate([0, 0, 0]) stand();
|
|
translate([DISTANCE, 0, 0]) stand();
|
|
translate([DISTANCE, DISTANCE, 0]) stand();
|
|
translate([0, DISTANCE, 0]) stand();
|
|
translate([DISTANCE/2, DISTANCE/2, -4]) rounded_cube([DISTANCE + 15, DISTANCE + 15, 4], 15, center = true);
|
|
}
|
|
|
|
module pcb_mount() {
|
|
DISTANCE_X = 41;
|
|
DISTANCE_Y = 66;
|
|
OUTER = 10;
|
|
H = 8;
|
|
|
|
module stand () {
|
|
difference () {
|
|
cylinder(r1 = 5, r2 = 4, h = H, center = true);
|
|
cylinder(r = 1.75, h = H, center = true);
|
|
}
|
|
}
|
|
translate([0, 0, 0]) stand();
|
|
translate([DISTANCE_X, 0, 0]) stand();
|
|
translate([DISTANCE_X, DISTANCE_Y, 0]) stand();
|
|
translate([0, DISTANCE_Y, 0]) stand();
|
|
translate([DISTANCE_X/2, DISTANCE_Y/2, -4]) rounded_cube([DISTANCE_X + OUTER, DISTANCE_Y + OUTER, 4], OUTER, center = true);
|
|
}
|
|
|
|
//l289N_mount();
|
|
//pcb_mount();
|
|
//motor_mount();
|
|
geared_motor_mount();
|
|
//motor_key();
|
|
//intval_panel();
|
|
//bearing (one_to_one_x, one_to_one_y, 5.5);
|
|
//difference () {
|
|
//translate([one_to_one_x, one_to_one_y, 31]) motor_mount();
|
|
//translate([one_to_one_x, one_to_one_y, 0]) cube([200, 200, 200]);
|
|
//}
|
|
//motor_mount_bottom();
|
|
|
|
//translate([one_to_one_x, one_to_one_y, 63]) rotate([0, 180, 0]) motor_12v(); |