Commit Graph

27 Commits

Author SHA1 Message Date
Matthew McWilliams b94d7fc106 Flatten side of bearing reinforcement to prevent obstructing the bolex variable shutter 2022-09-16 14:21:28 -04:00
Matthew McWilliams b92afebcd2 Add a bearing reinforcement piece 2022-09-16 11:05:55 -04:00
Matt McWilliams 1a6295bcf7 Add reinforced key designs for default key and 120RPM variant. 2021-05-02 14:47:21 -04:00
mmcw-dev 7a2b2ecdde Add a bolt guide 2018-11-10 16:27:40 -05:00
mmcw-dev d0de8fe32f space out electronics for intval2 2018-10-13 12:21:24 -04:00
mmcwilliams e026268cde Fix case 2018-10-10 18:18:18 -04:00
mmcwilliams 6eeedb06ae Increase case height for a less crowded working area 2018-10-09 18:02:33 -04:00
Matt McWilliams 5be6268811 Create a motor cap for the 120RPM motor 2016-05-23 13:21:31 -04:00
Matt McWilliams 1e1d113f4e Update standoffs to better attach to panel
Having built a number of these, attaching the standoffs is a problem.
This is an attempt to better attach them to the panel.
2016-05-17 10:19:35 -04:00
Matt McWilliams 5624d4fd01 Add height to motor_key_120
Also adjust the bottom of the hobbled shaft negative space so that the
motor is required to put some force against the camera body.
2016-05-13 15:14:02 -04:00
Matt 694ba5d7b5 Redesigned 120RPM motor_key
Needed to make it taller to have a better grip on the hobbled shaft.
This change shifts the bolt that rests against the flat end of the
shaft upwards, as well. May need to lift the bottom of the shaft
negative space for more pressure against the key.
2016-05-13 00:00:34 -04:00
Matt McWilliams 6f82eb6bf1 Make standoffs insert into laser cut panel
This change will improve the physical structure of the panel. The
standoffs will fit into enlarged holes in the panel so they can be
glued to it.
2016-05-09 18:23:17 -04:00
Matt 4f6e200076 Add an altered version of the electronics mount for Arduino Metro Minis 2016-04-15 00:02:11 -04:00
Matt McWilliams 5b1de86b11 Move set screw to internal position in 120 key 2016-04-09 19:41:45 -04:00
Matt fa051804cf Primary work on 120RPM motor mount 2016-04-04 17:51:16 -04:00
Matt 77f2fee695 wider opening for motor mount 2016-04-04 11:58:03 -04:00
Matt c3f9ef1001 Increase resolution 2016-04-02 22:47:23 -04:00
Matt 2d044f33ff Made changes for 120RPM motors 2016-04-02 22:46:01 -04:00
Matt c5791a8672 Added alt motor_keys for different 1:1 shaft sizes 2016-03-29 15:00:32 -04:00
Matt 9b28e52d28 Improved motor key to allow hobbled shaft insertion 2016-03-25 11:37:48 -04:00
Matt 33b0794263 Add exploded view for construction 2016-03-22 18:03:05 -04:00
Matt 44a0934a5a Add dxf plate 2016-03-22 16:18:13 -04:00
Matt 04ffaa273a optimized plate layout for 150x150mm printer 2016-03-22 13:15:52 -04:00
Matt f2eaf171e2 Added plate of all printable models 2016-03-21 18:16:34 -04:00
Matt 07ef60133e Clean up scad file for /dist 2016-02-29 17:12:48 -05:00
Matt 53b0d8a600 Add readme.md 2016-01-11 16:39:27 -05:00
Matt 451f7d0bd1 Add hardware design
Adds inval2.scad which can generate the hardware for 3d printing or
other manufacturing.
Very much in flux as electronics are being decided on.
2015-04-28 08:21:03 -04:00