Matt McWilliams
1a6295bcf7
Add reinforced key designs for default key and 120RPM variant.
2021-05-02 14:47:21 -04:00
mmcw-dev
7a2b2ecdde
Add a bolt guide
2018-11-10 16:27:40 -05:00
mmcw-dev
d0de8fe32f
space out electronics for intval2
2018-10-13 12:21:24 -04:00
mmcwilliams
e026268cde
Fix case
2018-10-10 18:18:18 -04:00
mmcwilliams
6eeedb06ae
Increase case height for a less crowded working area
2018-10-09 18:02:33 -04:00
5be6268811
Create a motor cap for the 120RPM motor
2016-05-23 13:21:31 -04:00
1e1d113f4e
Update standoffs to better attach to panel
...
Having built a number of these, attaching the standoffs is a problem.
This is an attempt to better attach them to the panel.
2016-05-17 10:19:35 -04:00
5624d4fd01
Add height to motor_key_120
...
Also adjust the bottom of the hobbled shaft negative space so that the
motor is required to put some force against the camera body.
2016-05-13 15:14:02 -04:00
694ba5d7b5
Redesigned 120RPM motor_key
...
Needed to make it taller to have a better grip on the hobbled shaft.
This change shifts the bolt that rests against the flat end of the
shaft upwards, as well. May need to lift the bottom of the shaft
negative space for more pressure against the key.
2016-05-13 00:00:34 -04:00
6f82eb6bf1
Make standoffs insert into laser cut panel
...
This change will improve the physical structure of the panel. The
standoffs will fit into enlarged holes in the panel so they can be
glued to it.
2016-05-09 18:23:17 -04:00
4f6e200076
Add an altered version of the electronics mount for Arduino Metro Minis
2016-04-15 00:02:11 -04:00
5b1de86b11
Move set screw to internal position in 120 key
2016-04-09 19:41:45 -04:00
fa051804cf
Primary work on 120RPM motor mount
2016-04-04 17:51:16 -04:00
77f2fee695
wider opening for motor mount
2016-04-04 11:58:03 -04:00
c3f9ef1001
Increase resolution
2016-04-02 22:47:23 -04:00
2d044f33ff
Made changes for 120RPM motors
2016-04-02 22:46:01 -04:00
c5791a8672
Added alt motor_keys for different 1:1 shaft sizes
2016-03-29 15:00:32 -04:00
9b28e52d28
Improved motor key to allow hobbled shaft insertion
2016-03-25 11:37:48 -04:00
33b0794263
Add exploded view for construction
2016-03-22 18:03:05 -04:00
44a0934a5a
Add dxf plate
2016-03-22 16:18:13 -04:00
04ffaa273a
optimized plate layout for 150x150mm printer
2016-03-22 13:15:52 -04:00
f2eaf171e2
Added plate of all printable models
2016-03-21 18:16:34 -04:00
07ef60133e
Clean up scad file for /dist
2016-02-29 17:12:48 -05:00
53b0d8a600
Add readme.md
2016-01-11 16:39:27 -05:00
451f7d0bd1
Add hardware design
...
Adds inval2.scad which can generate the hardware for 3d printing or
other manufacturing.
Very much in flux as electronics are being decided on.
2015-04-28 08:21:03 -04:00
Matt McWilliams
mmcw-dev
Matt McWilliams
Matt
Matt