Matt McWilliams
3a8dce573f
Render and normalize all parts. Use manifold option.
2024-11-28 20:24:48 -05:00
Matt McWilliams
28a7655c4a
Update the printed panel and the printed panel cover. Started building a BOM.
2024-11-13 21:54:55 -05:00
Matt McWilliams
d32338e067
Fixed rendering of printed panel. Removed panel_printed.stl (dumb).
2024-11-12 11:02:44 -05:00
Matt McWilliams
cdd74ede56
Add printed covers and update panel_printed with new bolts added
2024-11-12 00:37:05 -05:00
Matt McWilliams
5727d171a6
Cleanup to OpenSCAD code. Add sorting to makefile. Use new linter for Openscad to clean up a lot of magic numbers.
2024-11-11 22:43:45 -05:00
Matt McWilliams
000844e263
Add a set screw. Create a quickstart guide.
2024-10-08 09:30:50 -04:00
Matt McWilliams
12f88fbb95
Fix laser render. Re-render all DXF files
2024-05-28 22:22:21 -04:00
Matt McWilliams
f1c2ec94d9
Accidentally rendered all files wrong. This corrects that. Add laser rendering of DXF files.
2024-05-28 21:42:58 -04:00
Matt McWilliams
cb950f3f85
Correct wrongly-named l298N throughout SCAD file
2024-05-28 21:17:46 -04:00
Matt McWilliams
df74b30113
Tweaks needed for printing design
2023-12-22 19:10:29 -05:00
Matt McWilliams
6da3406254
Intval logo medallion
2023-09-12 20:40:18 -04:00
Matt McWilliams
1de4de6e1c
Create an alternate motor cap for bigger motors
2023-06-29 17:20:23 -04:00
Matt McWilliams
298f38ced9
cleanup
2023-05-09 18:51:21 -04:00
Matt McWilliams
013e15cdea
Create an arduino_nano electronics mount
2023-05-02 23:57:57 -04:00
Matt McWilliams
873093fa4c
Printable panel cover. Delete original intval1 design.
2023-04-28 19:20:54 -04:00
Matt McWilliams
ced940a858
Make a printable version of the intval2 laser cut panel.
2023-04-17 14:48:26 -04:00
Matt McWilliams
a783907da6
Use the sort-stl feature if it is available (not on mac?)
2023-04-05 23:02:45 -04:00
Matt McWilliams
53ef52ff89
Fix the 120 roller
2022-12-28 10:27:49 -05:00
Matt McWilliams
349d5694dc
Render missing stls
2022-12-20 15:56:46 -05:00
Matt McWilliams
51cd4af519
Add a reinforced motor mount top for alternate design
2022-12-20 15:20:25 -05:00
Matt McWilliams
8718e46263
Add additional models to build list
2022-12-20 13:22:28 -05:00
Matt McWilliams
b3c97597b0
Updated washer standoff
2022-10-08 15:37:23 -04:00
Matt McWilliams
9df82ffd4c
Add remaining parts to Makefile
2022-10-08 10:11:12 -04:00
e45062c153
Create Makefile and compile individual STL and DXF files for printing and laser cutting
2022-10-07 08:38:34 -04:00
Matt McWilliams
1f13ba5c0f
Save standoff washer design for repairs
2022-09-24 14:54:55 -04:00
Matt McWilliams
c2125cad65
Add void for standoff on bearing reinforcement part
2022-09-20 21:06:11 -04:00
Matt McWilliams
244239dab5
Slight adjustmetn forPrusa
2022-09-17 15:34:01 -04:00
b92afebcd2
Add a bearing reinforcement piece
2022-09-16 11:05:55 -04:00
Matt McWilliams
1a6295bcf7
Add reinforced key designs for default key and 120RPM variant.
2021-05-02 14:47:21 -04:00
mmcw-dev
7a2b2ecdde
Add a bolt guide
2018-11-10 16:27:40 -05:00
mmcw-dev
d0de8fe32f
space out electronics for intval2
2018-10-13 12:21:24 -04:00
mmcwilliams
e026268cde
Fix case
2018-10-10 18:18:18 -04:00
mmcwilliams
6eeedb06ae
Increase case height for a less crowded working area
2018-10-09 18:02:33 -04:00
5be6268811
Create a motor cap for the 120RPM motor
2016-05-23 13:21:31 -04:00
1e1d113f4e
Update standoffs to better attach to panel
...
Having built a number of these, attaching the standoffs is a problem.
This is an attempt to better attach them to the panel.
2016-05-17 10:19:35 -04:00
5624d4fd01
Add height to motor_key_120
...
Also adjust the bottom of the hobbled shaft negative space so that the
motor is required to put some force against the camera body.
2016-05-13 15:14:02 -04:00
694ba5d7b5
Redesigned 120RPM motor_key
...
Needed to make it taller to have a better grip on the hobbled shaft.
This change shifts the bolt that rests against the flat end of the
shaft upwards, as well. May need to lift the bottom of the shaft
negative space for more pressure against the key.
2016-05-13 00:00:34 -04:00
6f82eb6bf1
Make standoffs insert into laser cut panel
...
This change will improve the physical structure of the panel. The
standoffs will fit into enlarged holes in the panel so they can be
glued to it.
2016-05-09 18:23:17 -04:00
4f6e200076
Add an altered version of the electronics mount for Arduino Metro Minis
2016-04-15 00:02:11 -04:00
5b1de86b11
Move set screw to internal position in 120 key
2016-04-09 19:41:45 -04:00
fa051804cf
Primary work on 120RPM motor mount
2016-04-04 17:51:16 -04:00
77f2fee695
wider opening for motor mount
2016-04-04 11:58:03 -04:00
c3f9ef1001
Increase resolution
2016-04-02 22:47:23 -04:00
2d044f33ff
Made changes for 120RPM motors
2016-04-02 22:46:01 -04:00
c5791a8672
Added alt motor_keys for different 1:1 shaft sizes
2016-03-29 15:00:32 -04:00
9b28e52d28
Improved motor key to allow hobbled shaft insertion
2016-03-25 11:37:48 -04:00
33b0794263
Add exploded view for construction
2016-03-22 18:03:05 -04:00
44a0934a5a
Add dxf plate
2016-03-22 16:18:13 -04:00
04ffaa273a
optimized plate layout for 150x150mm printer
2016-03-22 13:15:52 -04:00
f2eaf171e2
Added plate of all printable models
2016-03-21 18:16:34 -04:00
Matt McWilliams
Matthew McWilliams
mmcw-dev
Matt McWilliams
Matt
Matt