16mm
/
intval2
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Link everything 

in Readme.md
This commit is contained in:
Matt 2016-03-15 21:10:21 -04:00
parent bda38a389e
commit 70687cce34
1 changed files with 12 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
Readme.md
View File

@ -3,11 +3,11 @@
---- ----
1. [Overview](#Overview) 1. [Overview](#Overview)
2. Attachment 2. [Attachment](#Attachment)
3. Usage 3. [Usage](#Usage)
4. Power 4. [Power](#Power)
5. Maintainance 5. [Maintainance](#Maintainance)
6. Assembly 6. [Assembly](#Assembly)
---- ----
### 1) <a name="Overview"></a>Overview ### 1) <a name="Overview"></a>Overview
@ -20,7 +20,7 @@ in either 1 or 2 seconds. This allows for a range of long exposure options when
used in conjuncture with the Rexofader. used in conjuncture with the Rexofader.
---- ----
### 2) Attachment ### 2) <a name="Attachment"></a>Attachment
To attach the INTVAL 2.0 to a Bolex camera, disable the motor and line up the four standoffs To attach the INTVAL 2.0 to a Bolex camera, disable the motor and line up the four standoffs
with the mounting holes on the body of the camera and insert the key into the 1:1 shaft. with the mounting holes on the body of the camera and insert the key into the 1:1 shaft.
@ -31,7 +31,7 @@ the screws that will hold the intervalometer in place. There are four standoffs
and screws, but only three need to be attached to maintain the hold required for operation. and screws, but only three need to be attached to maintain the hold required for operation.
---- ----
### 3) Usage ### 3) <a name="Usage">Usage
The INTVAL 2.0 has two physical interfaces: the buttons on the case and the shutter The INTVAL 2.0 has two physical interfaces: the buttons on the case and the shutter
release cable. The shutter release cable plugs into the underside of the case, next release cable. The shutter release cable plugs into the underside of the case, next
@ -50,7 +50,7 @@ during the 1 or 2 seconds that the shutter is rotating, exposure only occurs for
Delay refers to the time the intervalometer pauses between frames and only matters when running a sequence. The delay is set to ``42 ms`` by default and will be set to however long you hold it down for; holding the button for``10 seconds`` will set the delay between each frame to ``10 seconds``. Pressing the button quickly will reset the timer to the default ``42 ms``. Delay refers to the time the intervalometer pauses between frames and only matters when running a sequence. The delay is set to ``42 ms`` by default and will be set to however long you hold it down for; holding the button for``10 seconds`` will set the delay between each frame to ``10 seconds``. Pressing the button quickly will reset the timer to the default ``42 ms``.
---- ----
### 4) Power ### 4) <a name="Power">Power
Power the INTVAL 2.0 with 12VDC to the 2.1mm DC power jack located on the bottom of the case. Power the INTVAL 2.0 with 12VDC to the 2.1mm DC power jack located on the bottom of the case.
The maximum draw of the motor is under 1 Amp, so that much current should be ample to run the The maximum draw of the motor is under 1 Amp, so that much current should be ample to run the
@ -62,7 +62,10 @@ can be used to as mobile power sources, but they must be able to provide 12V and
[ Rechargeable 3800mAh Lithium Ion Battery Pack with DC Connector, 12 volt](http://www.amazon.com/gp/product/B007RQW5WG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B007RQW5WG&linkCode=as2&tag=sixteentools-20&linkId=JJV427F7SOAMASZV) [ Rechargeable 3800mAh Lithium Ion Battery Pack with DC Connector, 12 volt](http://www.amazon.com/gp/product/B007RQW5WG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B007RQW5WG&linkCode=as2&tag=sixteentools-20&linkId=JJV427F7SOAMASZV)
---- ----
### 6) Assembly ### 5) <a name="Maintainance">Maintainance
----
### 6) <a name="Assembly">Assembly
All parts of the INTVAL 2.0 are reproducible via 3D printing, laser cutting or purchasable for a total build cost of ~$50. The files in this repository consist of .SCAD, .STL, .DXF and .INO files. The .SCAD files contain all the elements needed to generate the physical body of the intervalometer with .DXF files for All parts of the INTVAL 2.0 are reproducible via 3D printing, laser cutting or purchasable for a total build cost of ~$50. The files in this repository consist of .SCAD, .STL, .DXF and .INO files. The .SCAD files contain all the elements needed to generate the physical body of the intervalometer with .DXF files for
laser cutting and .STL files for 3D printing. The .INO file contains the source code for the Arduino sketch laser cutting and .STL files for 3D printing. The .INO file contains the source code for the Arduino sketch