include <../common/common.scad>;

X = 100;
Y = 60;
Z = 30;

USB = -30;
L289N = 10;
ButtonD = 7.2;

module l289N_holes (r = 3/2 - .2, MOD_MOUNT = 0) {
    $fn = 60;
    DISTANCE = 36.5 + MOD_MOUNT;
    H = 50;
    translate([0, 0, 0]) cylinder(r = r, h = H * 5, center = true);
    translate([DISTANCE, 0, 0]) cylinder(r = r, h = H * 5, center = true);
    translate([DISTANCE, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
    translate([0, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
}

module l289N_mount () {
    $fn = 60;
	DISTANCE = 36.5;
	H = 4;
    THICKNESS = 3;
    
	module stand () {
        cylinder(r1 = 4, r2 = 3, h = H, center = true);
		cylinder(r = R(2.9), h = H + 5, center = true);
	}
    
	translate([0, 0, 0]) stand();
	translate([DISTANCE, 0, 0]) stand();
	translate([DISTANCE, DISTANCE, 0]) stand();
	translate([0, DISTANCE, 0]) stand();
    difference () {
        translate([DISTANCE/2, DISTANCE/2, -3]) rounded_cube([DISTANCE + 8, DISTANCE + 8, THICKNESS], 8, center = true); //base
        translate([DISTANCE/2, DISTANCE/2, -3]) rounded_cube([DISTANCE - 5, DISTANCE - 5, THICKNESS+1], 10, center = true); //base
    }
}

module Arduino_Nano_mount () {
    X = 18.02;
    Y = 43.5;
    Z = 10.5;
    BOARD_Z = 1.5;
    difference () {
        //outer
        cube([X + 4, Y + 4, Z], center = true);
        //inner void minus corners
        difference () {
            cube([X - 1, Y - 1, Z + 1], center = true);
            translate([(X / 2) - 1, (Y / 2) - 1, -BOARD_Z]) cylinder(r = (2 / 2), h = Z + 1, center = true, $fn = 20);
            translate([(-X / 2) + 1, (Y / 2) - 1, -BOARD_Z]) cylinder(r = (2 / 2), h = Z + 1, center = true, $fn = 20);
            translate([(X / 2) - 1, (-Y / 2) + 1, -BOARD_Z]) cylinder(r = (2 / 2), h = Z + 1, center = true, $fn = 20);
            translate([(-X / 2) + 1, (-Y / 2) + 1, -BOARD_Z]) cylinder(r = (2 / 2), h = Z + 1, center = true, $fn = 20);
        }
        //board void
        translate([0, 0, (Z / 2) - (BOARD_Z / 2)]) cube([X, Y, BOARD_Z], center = true);
        //usb void
        translate([0, Y / 2, (Z / 2) - (6 / 2) + 0.01]) cube([8, 10, 6], center = true);
    }
    
}

module case_bottom () {

    difference () {
        rounded_cube([X, Y, Z], d = 10, center = true, $fn = 40);
        translate([0, 0, 3]) rounded_cube([X - 5, Y - 5, Z], d = 7, center = true, $fn = 40);
        translate([USB, Y / 2, 7]) cube([8, 10, 30], center = true);
        
        translate([(X / 2) - (13 / 2), -12, 4]) rotate([0, 90, 0]) cylinder(r = R(12), h = 13.5, center = true, $fn = 30);
        
        translate([L289N + 6, 0, 3]) {
            rotate([90, 0, 0]) cylinder(r = R(4), h = Y + 1, center = true, $fn = 30);
            translate([0, 0, Z / 2]) cube([4, Y + 1, Z], center = true);
        }
        
        translate([(X / 2), 12, 4]) rotate([0, 90, 0]) cylinder(r = R(5), h = 10, center = true, $fn = 30);
    }


    translate ([-20, 0, 0]) {
        translate([L289N, -20 + 2, -8]) l289N_mount();
        translate([-10, 6, -7.1]) Arduino_Nano_mount();
    }
    
}

module case_top () {

    difference () {
        rounded_cube([X, Y, 3], d = 10, center = true, $fn = 40);
        translate([-2, 0, 0]) cube([24, 27, 20], center = true);
        translate([35, 18, 0]) cylinder(r = R(ButtonD), h = 10, center = true, $fn = 40);
        translate([35, -18, 0]) cylinder(r = R(ButtonD), h = 10, center = true, $fn = 40);
        //text
        translate([25, 15, -0.5]) rotate([0, 0, 90]) emboss("FWD >");
        translate([25, -15, -0.5]) rotate([0, 0, 90]) emboss("< BWD");
    }
    translate([0, 0, -2.9]) difference () {
        rounded_cube([X - 5, Y - 5, 3], d = 7, center = true, $fn = 40);
        rounded_cube([X - 11, Y - 11, 3 + 1], d = 7, center = true, $fn = 40);
    }

}
module emboss (string) {
    letter = 4;
    color("red") linear_extrude(10) {
        text(string, size = letter, halign = "center", valign = "center", $fn = 64);
    }
}


case_top();
//case_bottom();