Takeup improvements. Now you can use a M4x50mm bolt for the idle rollers (yet to be designed).
This commit is contained in:
parent
ed93b6da39
commit
175b9710b4
|
@ -104,7 +104,7 @@ module filter_holder () {
|
|||
}
|
||||
|
||||
module filter_reinforcement () {
|
||||
Z = 19.5 + 7.83;
|
||||
Z = 19.5 + 7.83-5.75;
|
||||
X = AX;
|
||||
difference () {
|
||||
cube([X, 15.5, Z], center = true);
|
||||
|
@ -130,7 +130,7 @@ module jk_takeup () {
|
|||
union () {
|
||||
block();
|
||||
translate([0, 0, -27.5]) filter_holder();
|
||||
translate([0, -1.1, -16]) filter_reinforcement();
|
||||
translate([0, -1.1, -16+(5.75/2)]) filter_reinforcement();
|
||||
}
|
||||
roller_bolts();
|
||||
}
|
||||
|
@ -164,6 +164,6 @@ module jk_takeup_halves (HALF = "A") {
|
|||
|
||||
//translate([0, 0, 40]) color("red") original_takeup();
|
||||
//jk_takeup();
|
||||
//jk_takeup_halves();
|
||||
color("blue") jk_takeup_halves("B");
|
||||
jk_takeup_halves();
|
||||
//color("blue") jk_takeup_halves("B");
|
||||
//m5_nut();
|
20
takeup.scad
20
takeup.scad
|
@ -10,8 +10,8 @@ MOTOR_SHAFT_D = 6;
|
|||
MOTOR_SHAFT_H = 16;
|
||||
MOTOR_SHAFT_HOBBLE = 1;
|
||||
|
||||
MOTOR_MOUNT_X = 32.5;
|
||||
MOTOR_MOUNT_Y = 17.5;
|
||||
MOTOR_MOUNT_X = 32.5 + 0.1;
|
||||
MOTOR_MOUNT_Y = 17.5 + 0.1;
|
||||
|
||||
M4 = 4.1;
|
||||
|
||||
|
@ -119,7 +119,7 @@ module daylight_spool_insert () {
|
|||
module motor_mount_void (D, Z) {
|
||||
cylinder(r = R(D), h = Z, center = true, $fn = 40);
|
||||
//bolt void
|
||||
translate([0, 0, 5]) cylinder(r = R(3.25), h = Z + 10, center = true, $fn = 40);
|
||||
translate([0, 0, 5]) cylinder(r = R(3.25 + 0.2), h = Z + 10, center = true, $fn = 40);
|
||||
translate([0, 0, 4.75]) cylinder(r = R(6), h = 3.5, center = true, $fn = 40);
|
||||
}
|
||||
|
||||
|
@ -149,27 +149,27 @@ module mount_plate () {
|
|||
translate([0, 0, 3.26 - .5]) cube([X, Y, 7], center = true);
|
||||
|
||||
//motor void (centered)
|
||||
translate([7, 0, 0]) {
|
||||
translate([-(46 / 2) + 15 + 1, 0, 0]) cylinder(r = R(15), h = 20, center = true, $fn = 60);
|
||||
translate([7-0.5, 0, 0]) {
|
||||
translate([-(46 / 2) + 15 + 1 + 0.5, 0, 0]) cylinder(r = R(15), h = 20, center = true, $fn = 60);
|
||||
translate([(MOTOR_MOUNT_X / 2)+1, (MOTOR_MOUNT_Y / 2), 0]) motor_mount_void(D, Z);
|
||||
translate([-(MOTOR_MOUNT_X / 2)+1, (MOTOR_MOUNT_Y / 2), 0]) motor_mount_void(D, Z);
|
||||
translate([(MOTOR_MOUNT_X / 2)+1, -(MOTOR_MOUNT_Y / 2), 0]) motor_mount_void(D, Z);
|
||||
translate([-(MOTOR_MOUNT_X / 2)+1, -(MOTOR_MOUNT_Y / 2), 0]) motor_mount_void(D, Z);
|
||||
|
||||
translate([-8 + 12.5 + 1, 0, 0]) cube([7.5, 17, Z], center = true);
|
||||
//pad void
|
||||
translate([-8 + 12.5 + 1, 0, 0]) cube([8, 17, Z], center = true);
|
||||
}
|
||||
|
||||
translate([MOUNT_X / 2, MOUNT_Y / 2, 0]) mount_plate_void();
|
||||
translate([-MOUNT_X / 2, MOUNT_Y / 2, 0]) mount_plate_void();
|
||||
translate([MOUNT_X / 2, -MOUNT_Y / 2, 0]) mount_plate_void();
|
||||
translate([-MOUNT_X / 2,-MOUNT_Y / 2, 0]) mount_plate_void();
|
||||
|
||||
translate([-MOUNT_X / 2,-MOUNT_Y / 2, 0]) mount_plate_void();
|
||||
|
||||
translate([X_CORNER, Y_CORNER, 3.26 - .5]) cube([CORNER, CORNER, 8], center = true);
|
||||
translate([-X_CORNER, Y_CORNER, 3.26 - .5]) cube([CORNER, CORNER, 8], center = true);
|
||||
translate([X_CORNER, -Y_CORNER, 3.26 - .5]) cube([CORNER, CORNER, 8], center = true);
|
||||
translate([-X_CORNER, -Y_CORNER, 3.26 - .5]) cube([CORNER, CORNER, 8], center = true);
|
||||
}
|
||||
|
||||
translate([X_CORNER - (CORNER / 2), Y_CORNER - (CORNER / 2), 3.26 - .5]) cylinder(r = CORNER, h = 7, center = true, $fn = 40);
|
||||
translate([-X_CORNER + (CORNER / 2), Y_CORNER - (CORNER / 2), 3.26 - .5]) cylinder(r = CORNER, h = 7, center = true, $fn = 40);
|
||||
translate([X_CORNER - (CORNER / 2), -Y_CORNER + (CORNER / 2), 3.26 - .5]) cylinder(r = CORNER, h = 7, center = true, $fn = 40);
|
||||
|
@ -250,7 +250,7 @@ module debug_assembled () {
|
|||
color("red") translate([0, 0, 34]) daylight_spool_insert();
|
||||
}
|
||||
|
||||
PART = "daylight_spool_insert_reinforced_nut";
|
||||
PART = "mount_plate";
|
||||
|
||||
if (PART == "slip_coupling") {
|
||||
slip_coupling();
|
||||
|
|
Loading…
Reference in New Issue