248 lines
7.8 KiB
OpenSCAD
248 lines
7.8 KiB
OpenSCAD
IN = 25.4;
|
||
MM = 1;
|
||
|
||
function R (diameter) = diameter / 2.0;
|
||
|
||
function IN2MM(in) = in * IN;
|
||
|
||
function MM2IN(mm) = mm / IN;
|
||
|
||
module hex (diag = 10, h = 1) {
|
||
cylinder(r = diag / 2, h = h, center = true, $fn = 6);
|
||
}
|
||
|
||
module tube(o = 1, i = 0, h = 1, center = false, $fn = 12) {
|
||
$fn = $fn;
|
||
union () {
|
||
difference () {
|
||
cylinder(r = o, h = h, center = center);
|
||
cylinder(r = i, h = h, center = center);
|
||
}
|
||
}
|
||
}
|
||
|
||
module m3_nut (H = 5) {
|
||
cylinder(r=R(6.6), h=H, center=true, $fn=6);
|
||
}
|
||
|
||
module rounded_cube (cube_arr = [1, 1, 1], d = 0, center = false) {
|
||
off_x = 0;
|
||
off_y = 0;
|
||
r = d/2;
|
||
union () {
|
||
cube([cube_arr[0] - d, cube_arr[1], cube_arr[2]], center = center);
|
||
cube([cube_arr[0], cube_arr[1] - d, cube_arr[2]], center = center);
|
||
translate ([1 * (cube_arr[0] / 2) - r , 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
||
translate ([-1 * (cube_arr[0] / 2) + r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
||
translate ([1 * (cube_arr[0] / 2) - r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
||
translate ([-1 * (cube_arr[0] / 2) + r, 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
|
||
}
|
||
}
|
||
|
||
module c_battery () {
|
||
/* C Cell battery, 26.1 × 50 */
|
||
x = 26.1;
|
||
x_fuzz = .3;
|
||
y = 50;
|
||
y_fuzz = 2;
|
||
cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
|
||
}
|
||
|
||
module sub_c_battery () {
|
||
/* Sub C Cell battery, 22.2 × 42.9 */
|
||
x = 22.2;
|
||
x_fuzz = .3;
|
||
y = 42.9;
|
||
y_fuzz = 2;
|
||
cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
|
||
}
|
||
|
||
module hex (r = 1, h = 1, center = false) {
|
||
cylinder(r = r, h = h, center = center, $fn = 6);
|
||
}
|
||
|
||
module cone_45 (d = 1, center = false) {
|
||
cylinder(r1 = d/2, r2 = 0, h = d, center = center);
|
||
}
|
||
|
||
module decoys (d = 10, z = 0, number = 4, cube_size = 4, debug = false) {
|
||
for (i = [0: number]) {
|
||
rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size, cube_size, cube_size], center = true);
|
||
if (debug && i == 0) {
|
||
rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size * 5, cube_size* 5, cube_size], center = true);
|
||
}
|
||
}
|
||
}
|
||
|
||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||
// Paraboloid module for OpenScad
|
||
//
|
||
// Copyright (C) 2013 Lochner, Juergen
|
||
// http://www.thingiverse.com/Ablapo/designs
|
||
//
|
||
// This program is free software. It is
|
||
// licensed under the Attribution - Creative Commons license.
|
||
// http://creativecommons.org/licenses/by/3.0/
|
||
//////////////////////////////////////////////////////////////////////////////////////////////
|
||
|
||
module paraboloid (y=10, f=5, rfa=0, fc=1, detail=44){
|
||
// y = height of paraboloid
|
||
// f = focus distance
|
||
// fc : 1 = center paraboloid in focus point(x=0, y=f); 0 = center paraboloid on top (x=0, y=0)
|
||
// rfa = radius of the focus area : 0 = point focus
|
||
// detail = $fn of cone
|
||
|
||
hi = (y+2*f)/sqrt(2); // height and radius of the cone -> alpha = 45° -> sin(45°)=1/sqrt(2)
|
||
x =2*f*sqrt(y/f); // x = half size of parabola
|
||
|
||
translate([0,0,-f*fc]) // center on focus
|
||
rotate_extrude(convexity = 10,$fn=detail ) // extrude paraboild
|
||
translate([rfa,0,0]) // translate for fokus area
|
||
difference(){
|
||
union(){ // adding square for focal area
|
||
projection(cut = true) // reduce from 3D cone to 2D parabola
|
||
translate([0,0,f*2]) rotate([45,0,0]) // rotate cone 45° and translate for cutting
|
||
translate([0,0,-hi/2])cylinder(h= hi, r1=hi, r2=0, center=true, $fn=detail); // center cone on tip
|
||
translate([-(rfa+x ),0]) square ([rfa+x , y ]); // focal area square
|
||
}
|
||
translate([-(2*rfa+x ), -1/2]) square ([rfa+x ,y +1] ); // cut of half at rotation center
|
||
}
|
||
}
|
||
|
||
/*
|
||
// Height of trapazoid
|
||
height = 19;
|
||
|
||
// Width of top cube
|
||
top_x = 30;
|
||
// Length of top cube
|
||
top_y = 34;
|
||
|
||
// Width of bottom cube
|
||
bottom_x = 45;
|
||
// Length of bottom cube
|
||
bottom_y = 65;
|
||
|
||
wall_thickness = 2;
|
||
*/
|
||
module trap_cube(height = 19, top_x = 30, top_y = 34, bottom_x = 45, bottom_y = 65, wall_thickness = 2) {
|
||
difference(){
|
||
hull(){
|
||
translate([0,0,height])
|
||
cube([top_x, top_y, 0.1], center=true);
|
||
cube([bottom_x, bottom_y, 0.1], center=true);
|
||
}
|
||
|
||
hull(){
|
||
translate([0,0,height])
|
||
cube([top_x - wall_thickness, top_y - wall_thickness, 0.1], center=true);
|
||
cube([bottom_x - wall_thickness, bottom_y - wall_thickness, 0.1], center=true);
|
||
}
|
||
}
|
||
}
|
||
|
||
module NEMA17_motor_shaft (L = 22.75) {
|
||
//shaft
|
||
difference () {
|
||
cylinder(r = R(5), h = L, center = true, $fn = 30);
|
||
translate([0, 4.5, 4.7]) cube([5, 5, L+1], center = true);
|
||
}
|
||
}
|
||
|
||
//NEMA17 Stepper
|
||
module NEMA17 ( H = 33 ) { //alt = 47.5
|
||
difference () {
|
||
cube([42, 42, H], center = true);
|
||
for (i = [0 : 3]) {
|
||
rotate([0, 0, (i * 90) + 45]) translate([29.7, 0, 0]) cube([5.5, 5.5, H + 1], center = true);
|
||
}
|
||
translate([31/2, 31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
|
||
translate([-31/2, 31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
|
||
translate([31/2, -31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
|
||
translate([-31/2, -31/2, (H/2)-1.9]) cylinder(r = R(3), h = 4, center = true, $fn=30);
|
||
}
|
||
//pad
|
||
translate([0, 0, (H/2) + (1.9/2)]) {
|
||
cylinder(r = R(22), h = 1.9, center = true, $fn = 100);
|
||
}
|
||
//shaft
|
||
translate([0, 0, (H/2) + (22.75/2)]) {
|
||
NEMA17_motor_shaft();
|
||
}
|
||
}
|
||
|
||
module geared_motor_shaft () {
|
||
MOTOR_SHAFT_D = 6;
|
||
MOTOR_SHAFT_H = 16;
|
||
MOTOR_SHAFT_HOBBLE = 1;
|
||
difference () {
|
||
cylinder(r = R(MOTOR_SHAFT_D), h = MOTOR_SHAFT_H, center = true, $fn = 60);
|
||
translate([MOTOR_SHAFT_D - MOTOR_SHAFT_HOBBLE, 0, 0]) cube([MOTOR_SHAFT_D, MOTOR_SHAFT_D, MOTOR_SHAFT_H + 1], center = true);
|
||
}
|
||
}
|
||
|
||
//Geartisan Worm Gear Motor - JSX40-370
|
||
module geared_motor () {
|
||
MOTOR_MOUNT_X = 32.5;
|
||
MOTOR_MOUNT_Y = 17.5;
|
||
|
||
module motor_mount_pad (D, Z) {
|
||
difference () {
|
||
cylinder(r = R(D), h = Z, center = true, $fn = 40);
|
||
//bolt void
|
||
cylinder(r = R(2.5), h = Z + 1, center = true, $fn = 40);
|
||
}
|
||
}
|
||
|
||
module motor_mounts () {
|
||
Z = 1.5;
|
||
D = 7.5;
|
||
|
||
translate([MOTOR_MOUNT_X / 2, MOTOR_MOUNT_Y / 2, 0]) motor_mount_pad(D, Z);
|
||
translate([-MOTOR_MOUNT_X / 2, MOTOR_MOUNT_Y / 2, 0]) motor_mount_pad(D, Z);
|
||
translate([MOTOR_MOUNT_X / 2, -MOTOR_MOUNT_Y / 2, 0]) motor_mount_pad(D, Z);
|
||
translate([-MOTOR_MOUNT_X / 2, -MOTOR_MOUNT_Y / 2, 0]) motor_mount_pad(D, Z);
|
||
}
|
||
|
||
cube([46, 32, 21], center = true);
|
||
translate([(46 / 2) + (30 / 2), 0, 1.5]) rotate([0, 90, 0]) cylinder(r = 24 / 2, h = 30, center = true, $fn = 80);
|
||
translate([-(46 / 2) + 14.5, 0, -18.5]) rotate([0, 0, 90]) geared_motor_shaft();
|
||
//pad
|
||
translate([-(46 / 2) + 14.5, 0, -(1 / 2) - 10.5]) cylinder(r = 13 / 2, h = 1, center = true, $fn = 60);
|
||
//mount pads
|
||
translate([-0.5, 0, -(1.5 / 2) - 10.5]) motor_mounts();
|
||
}
|
||
|
||
module opto_endstop () {
|
||
difference(){
|
||
union(){
|
||
// base PCB
|
||
color("green") cube([33.0,1.6,10.5]);
|
||
// add the switch module
|
||
translate([8.4,1.6,10.5/2-6.4/2]) optoswitch();
|
||
// connector
|
||
translate([0.2,-7,0]) color("white") cube([5.8,7,10.5]);
|
||
// led
|
||
translate([3.5,1.6,10.5/2-1.5/2]) color("red") cube([2,0.7,1.5]);
|
||
}
|
||
translate([8.4,0,10.5/2-6.4/2]) {
|
||
for ( hole = [2.75,24.5-2.75] ){
|
||
rotate([90,0,0]) translate([hole,6.4/2,-4]) cylinder(r=1.5, h=4.5,$fn=40);
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
// switch module
|
||
module optoswitch() {
|
||
difference(){
|
||
union (){
|
||
color("gray") cube([24.5,3.5,6.4]);
|
||
color("gray")translate([6.63,0,0]) cube([4.45,11.3,6.3]);
|
||
color("gray")translate([13.63,0,0]) cube([4.45,11.3,6.3]);
|
||
}
|
||
for ( hole = [2.75,24.5-2.75] ){
|
||
rotate([90,0,0]) translate([hole,6.4/2,-4]) cylinder(r=1.5, h=4.5,$fn=40);
|
||
}
|
||
}
|
||
} |