52 lines
2.1 KiB
Markdown
52 lines
2.1 KiB
Markdown
|
# 110 Cartridge
|
||
|
|
|
||
|
|
This module contains a 3D printable 110 cartridge for downspooling 16mm guage film for use with 110 still cameras.
|
||
|
|
Previously this was called the "minolta16_cartridge" on this site but it is compatible with all standard 110 cameras.
|
||
|
|
|
||
|
|
This design requires loading in a changing bag or completely dark room.
|
||
|
|
Initially this was created for [FDM printers](https://en.wikipedia.org/wiki/Fused_filament_fabrication), but updates can be made to the design for it to be used with resin [SLA printers](https://en.wikipedia.org/wiki/Stereolithography).
|
||
|
|
It does not have a top cover on the cartridge itself, currently, because of the minimum z-height for FDM printing but SLA printers should be able to make a cartridge thin enough that it can support a cover.
|
||
|
|
|
||
|
|
The actual opaqueness of available printing materials is another concern, which is why this design is recommended to use only in a changing bag or darkened room.
|
||
|
|
If there is any light transmission at all, this can compromise the film by fogging or flashing it.
|
||
|
|
|
||
|
|
-----
|
||
|
|
|
||
|
|
## 110 Cartridge Body
|
||
|
|
|
||
|
|
This is the main body of the cartridge and is one of only two absolutely necessary parts to print to be able to load and shoot film; the other being the takeup insert.
|
||
|
|
Film is loaded into the feed (smaller) side of the cartridge and threaded through to the takeup side and affixed to the takeup insert
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
[Download STL](./stl/110_cartridge_body.stl)
|
||
|
|
|
||
|
|
-----
|
||
|
|
|
||
|
|
## 110 Cartridge Takeup Insert
|
||
|
|
|
||
|
|
This takeup insert is where film is affixed and wound around it while the camera advances between frames.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
[Download STL](./stl/110_cartridge_takeup.stl)
|
||
|
|
|
||
|
|
-----
|
||
|
|
|
||
|
|
## 110 Cartridge Case
|
||
|
|
|
||
|
|
This is the case for the cartridge.
|
||
|
|
It should not be considered light safe without testing.
|
||
|
|
As mentioned above, 3D printed materials have different levels of light transmission, even if they are completely black.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
[Download STL](./stl/110_cartridge_case.stl)
|
||
|
|
|
||
|
|
-----
|
||
|
|
|
||
|
|
## 110 Cartridge Cover
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
[Download STL](./stl/110_cartridge_cover.stl)
|