157 lines
3.1 KiB
C++
157 lines
3.1 KiB
C++
#include <Servo.h>
|
|
|
|
boolean debug_state = true;
|
|
|
|
/*
|
|
----------------------------------------------------
|
|
Servo - Arduino
|
|
-
|
|
Red - 5V
|
|
Black - GND
|
|
Yellow - PWM Pin (9 in this example)
|
|
|
|
Using TowerPro SG-5010 - default angle 93
|
|
TowerPro MG-995 - default angle 93
|
|
as servos for development
|
|
----------------------------------------------------
|
|
*/
|
|
|
|
/* ------------------------------------------------
|
|
* pins
|
|
* ------------------------------------------------*/
|
|
//Arduino Duemilanove +
|
|
//Arduino Uno
|
|
const int PIN_SERVO = 9;
|
|
|
|
volatile boolean running = false;
|
|
volatile boolean cap_state = false;
|
|
|
|
volatile int angle = 0;
|
|
const int cap_on_angle = 153; // tune this variable to your servo
|
|
const int cap_off_angle = 93; // -60 degrees apart
|
|
volatile long timer = 0;
|
|
volatile int current_angle = 0;
|
|
|
|
const char cmd_cap_on = 'A';
|
|
const char cmd_cap_off = 'B';
|
|
|
|
const char cmd_debug = 'd';
|
|
const char cmd_connect = 'i';
|
|
volatile char cmd_char = 'z';
|
|
const char cmd_mcopy_identifier = 'm';
|
|
const char cmd_capper_identifier = 'C';
|
|
|
|
const int serialDelay = 5;
|
|
|
|
Servo servo;
|
|
//SG-5010 speed 0.18s / 60 degree
|
|
//
|
|
//converted to milliseconds/angle
|
|
const float servoSpeed = 400.0 / 60.0;
|
|
|
|
void setup() {
|
|
Serial.begin(57600);
|
|
Serial.flush();
|
|
Serial.setTimeout(serialDelay);
|
|
|
|
Pins_init();
|
|
Servo_init();
|
|
}
|
|
|
|
void loop() {
|
|
if (Serial.available()) {
|
|
/* read the most recent byte */
|
|
cmd_char = (char)Serial.read();
|
|
}
|
|
if (cmd_char != 'z') {
|
|
cmd(cmd_char);
|
|
cmd_char = 'z';
|
|
}
|
|
timer = millis();
|
|
|
|
}
|
|
|
|
void cmd (char val) {
|
|
if (val == cmd_debug) {
|
|
debug();
|
|
} else if (val == cmd_connect) {
|
|
connect();
|
|
} else if (val == cmd_mcopy_identifier) {
|
|
identify();
|
|
} else if (val == cmd_cap_on) {
|
|
Cap_on(false, false);
|
|
} else if (val == cmd_cap_off) {
|
|
Cap_off(false, false);
|
|
}
|
|
}
|
|
|
|
void debug () {
|
|
debug_state = true;
|
|
Serial.println(cmd_debug);
|
|
log("debugging enabled");
|
|
}
|
|
|
|
void connect () {
|
|
Serial.println(cmd_connect);
|
|
log("connect()");
|
|
}
|
|
|
|
void identify () {
|
|
Serial.println(cmd_capper_identifier);
|
|
log("identify()");
|
|
}
|
|
|
|
void Pins_init () {
|
|
//
|
|
}
|
|
|
|
void Servo_init () {
|
|
servo.attach(PIN_SERVO);
|
|
Cap_off(true, true);
|
|
}
|
|
|
|
void Servo_angle (int newAngle) {
|
|
servo.write(newAngle);
|
|
delay(Servo_delay(newAngle, angle) + 50);
|
|
angle = newAngle;
|
|
}
|
|
|
|
int Servo_delay (int angleA, int angleB) {
|
|
int angle = abs(angleA - angleB);
|
|
return (int) ceil((float) angle * servoSpeed);
|
|
}
|
|
|
|
void Cap_off (boolean suppress, boolean force) {
|
|
current_angle = servo.read();
|
|
if (cap_state || current_angle != cap_off_angle) {
|
|
Servo_angle(cap_off_angle);
|
|
cap_state = false;
|
|
} else {
|
|
log("Cap already off");
|
|
}
|
|
log("Cap_off()");
|
|
if (!suppress) {
|
|
Serial.println(cmd_cap_off);
|
|
}
|
|
}
|
|
|
|
void Cap_on (boolean suppress, boolean force) {
|
|
current_angle = servo.read();
|
|
if (!cap_state || current_angle != cap_on_angle) {
|
|
Servo_angle(cap_on_angle);
|
|
cap_state = true;
|
|
} else {
|
|
log("Cap already on");
|
|
}
|
|
log("Cap_on()");
|
|
if (!suppress) {
|
|
Serial.println(cmd_cap_on);
|
|
}
|
|
}
|
|
|
|
void log (String msg) {
|
|
if (debug_state) {
|
|
Serial.println(msg);
|
|
}
|
|
}
|