Merge in 9 months of work on capper branch #71

mattmcw · 2023-02-19T05:27:59Z

mattmcw commented

2023-02-19 05:27:59 +00:00

Capper branch was created as a feature branch but encapsulated multiple other features. Needs to be merged to main and if work is needed, will be shifted into independent feature branches.

mattmcw added 95 commits 2023-02-19 05:28:00 +00:00

c15c376a2f Start work on capper branch

96e0ce6050 Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper

f585aa2a5a Upgrade electron 11 -> 19 (huge jump). Install new remote module to preserve legacy communication protocol.

c77201ef4e Add new commands and identifiers for the capper, start moving into capital characters

9d3bf24627 Hardware ideas for capper mount and flag. Need to model servo and add places for endstops

f7a3c52260 Silly typo: did not invoke Servo_init() and so servo was not initalizing

818c8453ee Capper OpenSCAD work

f9d716552b Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper

2f9201716a All capper work. Debug firmware for testing. STL of cap as printed.

129647b863 App work

dae4e65aee Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper

04a0330327 All work on first draft of capper hardware

585c47d6c7 Allow capper identifier in list of acceptable responses.

28dc19fc32 Work on endstop functionality

78f7ac0e68 Mount work

3a435933e3 Work on the opto endstop mount. This needs to be re-oriented before next print.

62a66f5f6d More mount work and start of endstop logic. Rebuilding the B&H projector unity.

4c13c54815 Updates to endstop mount design. Had incorrectly positioned voids for SMD chips on the endstop

e275539fb0 Remove endstop completely and start rounding surfaces.

2924efe39f Reduce the size of the void for the screw in the cap.

c0f056cd8d Re-render all STLs for capper, removing the opto endstop component (for now)

c3661d6ff1 Remove opto endstop logic, ready for hardware testing.

c0ec81c0f9 Add Servo debug script

18dbb72a54 Minor updates to comments

76799bd66d Capper work

b0ca15bd8d Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper

c33c6e24f6 Work on motor rod

8ec5816364 Adjust settings page to support Processing input

70c2c695f0 All capper work. Need to wrap all actions in the 'b' command and push functionality to a lower level to prevent unneeded complexity.

bc48765b35 Start work on base

ea055d6e56 Capper case candidate

9d0545aa4f All capper features in app, can shoot blank frames, can turn on capper independently and can schedule blank frames in the sequencer. Some cleanup may be needed but there are no noticeable regressions in the app. TODO: Finish all arduino scripts.

6582154ec6 Fix debug script and component

3f759f5678 Add the ability to detect a single capper device

f55b72044c Mcopy firmware with optional capper feature

1964d6002d Add mono logo as png, but might use svg instead. Render crashed PC.

ee0ab663d7 Complete the alert feature. Have not created pause, but this could be done using the same alert object to prevent code duplication.

fe61e63e76 Add secondary projector and camera commands to the mscript module

b29478cb58 Increment build patch version

3ec1373f08 Caught a possible ancient bug in the loop logic for calculating state of camera and projector backwards movements.

6601c030f7 Refactor mscript GUI code into Typescript

72b5077356 Restructure includes and type definition files so that mscript runs

d5ecd9e057 Improve capper documentation

5026cf869f Arri-S work

206c266b08 Added Arri-S motor and cap measurements as taken 10/8/2022

3419172535 Arri-S work

4281ca4390 Work on Arri-S DC motor

81fc54af8d DC motor design has all components designed, need to print, test and adjust.

755ea757f7 Add set screw for bearing and counter sink bolt caps for other cap m3s

69273d2a1c Increase scale of motor shaft void by 5%

d9a8576701 Adjust size of drive coupling for the DC connector

b20a6084e6 Allow for more space for the microswitch

42b3aa767d Allow for even more space for microswritch

bb5b7c7897 Add divot to the drive coupling

787e6ed06e Add a concept arri_s camera controller firmware. Using class-based approach as an experiment in Arduino code structure.

98f2c7a24a Pausing work on arri_s_DC firmware because hardware is less than ideal. Too much play in the motor position to trust right now. Steppers better approach.

1fcbec7466 Work on stepper motor design and software. Motor still moves more slowly than it should but will investigate multiple factors leading to this result

fcb77232ec Create the driveCoupling module for the stepper motor design

ee1e9c9feb Stepper firmware is working. Needed extra tape around coupling connector to add friction to connection and now it keeps.

3942cd05be Declare stepsPerRevolution so change is explicit when that happens

dec96ec9be Use variable in stepper declaration

cbd7001228 Save work on the JK99 shield.

0c2e39f0b2 Arri bellows work

30bd35e21d Add an M4 nut to the common OpenSCAD lib

8aaa2b8940 Add a concept JK lens assembly

20c9287ac2 Work on concept JK lens assembly

925659ba4b Create an Arri S mount for the JK rails

622a8a7c42 Add first concept bellows board

ef0d246901 Increase the inner diameter of the bellows board to allow the threads to pass through cleanly and be held in place by the screw

0829ec9081 Use a variable

95612c1d18 Add m3 nuts

9b34b4e026 Adjust the height of the mount (-14.5mm) and make bolt voids larger

41504caac9 Increase the bolt size on the bellows board

164bde8cce All arri s mount and jk lens assembly work. need to do some branch cleanup on this project and tackle capper issues for merge of this branch.

1029885047 Update threaded Z, still needs m3 bolts

46be1bfd3b Assembly work. Adjusted design to simplify placement of 2 linear bearings

c2546d2bc5 Add m3 nuts and bolts to threaded z movement

cbe6477af2 Improvements to bearing and Tnut size

3036aebbc4 Knob and collar work

597137670d Merge base work with knob changes

c181e003a3 First draft of base

92067bdbef Add top part to assembly

c600fea4e1 Start rails concept

0b816ae8e1 Adjust the position of the Z axis, move the linear bearing up and down to prevent binding on motion

f127dc1128 Merge remote-tracking branch 'origin/capper' into capper

682167db48 Add new commands for takeup forward and takeup backward

ab6f517d27 Rails work

cc06655cd6 Update debug

99794d04c2 jk assembly and arri-s wip

2dce6f4b08 Merge branch 'capper' of git.sixteenmillimeter.com:16mm/mcopy into capper

d0fe54b429 Add m5 nut to the common lib

49464cd25a Finished the design of the lens assembly base z attachment

135540b261 Remove some material for the rails

325837d93e Adjustment to allow space on the right side

cff558ef9a Add 15mm to mount void for camera bolt

mattmcw merged commit c5e66a6f40 into main

2023-02-19 05:28:46 +00:00

mattmcw referenced this issue from a commit

2023-02-19 05:28:46 +00:00

Merge pull request 'Merge in 9 months of work on capper branch' (#71) from capper into main

mattmcw deleted branch capper

2023-02-19 05:28:55 +00:00

Sign in to join this conversation.

No reviewers

No Label

No Milestone

No project

No Assignees

1 Participants

Notifications

Due Date

The due date is invalid or out of range. Please use the format 'yyyy-mm-dd'.

No due date set.

Dependencies

No dependencies set.

Reference: 16mm/mcopy#71