Matt McWilliams
4539c6d897
Methods in place for setting exposure
2023-07-05 15:17:45 -04:00
Matt McWilliams
0b71da8e7b
Canon BLE two-Arduino rewrite WIP
2023-06-27 23:16:16 -04:00
Matt McWilliams
c0d6cbccec
Can now detect if state is available on a device
2023-06-17 17:57:30 -04:00
Matt McWilliams
95ede98623
State string should start and end with the character
2023-06-17 13:08:00 -04:00
Matt McWilliams
71e4bea384
Preliminary state support in arduino library. Currently confirms the negative state. Might want to push it until after verify, out of enumerate.
2023-06-16 23:04:16 -04:00
Matt McWilliams
83aa3099c4
Update the settings page with time for projector and camera actions
2023-06-16 22:07:53 -04:00
Matt McWilliams
672db32917
Put in place changes needed to receive a string from an arduino
2023-06-12 22:45:25 -04:00
Matt McWilliams
142c990a0e
Refactored GUI into TypeScript and class-based format
2023-03-18 16:59:26 -04:00
Matt McWilliams
512f6c86ad
Resolves #73 . Delay is exported in .ts file so it is non-ambient
2023-03-01 13:35:45 -05:00
Matt McWilliams
5db5d477e4
Timing is now updated via rolling average on all projector and camera actions. This data is reset when profile is changed. This data is stored in the settings.json and loaded on start so estimates will improve the more it is used.
2023-02-28 15:55:02 -05:00
Matt McWilliams
3c19cd35cf
Resolves #4 (4 years ago!). Adds delay (stops scripts for X seconds), alert (displays an alert that stops script execution) and pause (displays a pre-populated alert).
2023-02-28 12:49:11 -05:00
Matt McWilliams
02639466ee
By doing a check for active clients during the sequencer start and stop actions, the local display is no longer used. Resolves first part of #20 .
2023-02-25 17:00:11 -05:00
Matt McWilliams
6e2795d380
Remove ACK messages for ping, rely on
2023-02-25 16:33:55 -05:00
Matt McWilliams
0162d012c5
Server can now display images and will completely preempt local display when done
2023-02-25 13:22:20 -05:00
Matt McWilliams
47fb673b78
Combined script and html into single request (problems with iOS safari).
...
Can get script loaded but still cannot connect to websocket server without SSL.
ALSO: Now can pre-empt opening new display if an active client is connected to server.
Otherwise will open a local link.
2023-02-25 13:11:40 -05:00
Matt McWilliams
f296488bc2
Further progress on #20 . TODO: Image display logic on the server side. Need to add image to proxy list and give it a properly-extensioned name and cmdAll.
...
ALSO: Server is not working on iOS.
2023-02-25 12:40:35 -05:00
Matt McWilliams
f5392aea9f
Resolves #74
2023-02-25 12:33:18 -05:00
Matt McWilliams
24b1301f9f
Adding contextIsolation: false to the display module fixes the initial issue in #74 , cannot use "require" but the escape button does not work due to "Cannot read properties of undefined (reading 'getCurrentWindow')"
2023-02-25 12:16:47 -05:00
Matt McWilliams
1290a8f324
Major progress on #20 . Promised-based websocket command structure is completed. All functionality needs to be placed into individual classes and any new functions get added to the server.
...
Will create entire thin client using this method.
2023-02-25 11:59:56 -05:00
Matt McWilliams
e64277e438
More work on #20 . Fix typos in display code. Should re-work script into transpiled ts file.
2023-02-25 02:08:56 -05:00
Matt McWilliams
c9bcb74a9f
Progress on #20 . Can start up a server and serve client.js
2023-02-25 02:08:05 -05:00
Matt McWilliams
42db1f81b8
Server work
2023-02-25 00:24:07 -05:00
d5ecd9e057
Improve capper documentation
2022-09-16 09:45:19 -04:00
72b5077356
Restructure includes and type definition files so that mscript runs
2022-08-07 22:18:58 -04:00
6601c030f7
Refactor mscript GUI code into Typescript
2022-08-07 22:10:53 -04:00
3ec1373f08
Caught a possible ancient bug in the loop logic for calculating state of camera and projector backwards movements.
2022-08-07 17:23:06 -04:00
Matt McWilliams
fe61e63e76
Add secondary projector and camera commands to the mscript module
2022-08-04 10:52:00 -04:00
Matt McWilliams
ee0ab663d7
Complete the alert feature. Have not created pause, but this could be done using the same alert object to prevent code duplication.
2022-08-03 09:02:47 -04:00
Matt McWilliams
3f759f5678
Add the ability to detect a single capper device
2022-07-17 09:57:52 -04:00
Matt McWilliams
9d0545aa4f
All capper features in app, can shoot blank frames, can turn on capper independently and can schedule blank frames in the sequencer. Some cleanup may be needed but there are no noticeable regressions in the app. TODO: Finish all arduino scripts.
2022-07-15 18:11:26 -04:00
70c2c695f0
All capper work. Need to wrap all actions in the 'b' command and push functionality to a lower level to prevent unneeded complexity.
2022-07-13 15:21:26 -04:00
Matt McWilliams
76799bd66d
Capper work
2022-07-13 08:28:18 -04:00
Matt McWilliams
585c47d6c7
Allow capper identifier in list of acceptable responses.
2022-06-13 08:08:42 -04:00
Matt McWilliams
129647b863
App work
2022-06-12 13:37:00 -04:00
Matt McWilliams
f585aa2a5a
Upgrade electron 11 -> 19 (huge jump). Install new remote module to preserve legacy communication protocol.
2022-06-04 11:11:23 -04:00
Matt McWilliams
c15c376a2f
Start work on capper branch
2022-05-30 18:50:18 -04:00
Matt McWilliams
bbfe6fc657
Add option to use Processing with a server as a capture method triggered by the camera.
...
Enter a url into the Settings panel in the Processing URL input box and select the radio button.
2022-04-30 15:58:17 -04:00
Matt McWilliams
8c14a06b96
Removed naked console.log statements that were used to debug a serial issue. If needed they can be re-added to the actual log library.
2021-03-19 12:10:07 -04:00
Matt McWilliams
3e0ac3f0d0
Added return types to Filmout library and added return types to comments where needed.
2021-03-19 12:09:03 -04:00
Matt McWilliams
8a6bc0b4f5
Fixed video export, still sequence selection
2021-03-18 11:27:53 -04:00
Matt McWilliams
a2af605d37
Filmout needs to receive the whole state, not just the frame. Still broken.
2021-03-18 10:00:49 -04:00
Matt McWilliams
31c701734a
Corrected a UI issue with selecting directories of non-supported images. Works on macOS now with videos, images and image sequences. Testing on linux again before resolving.
2021-02-24 11:50:15 -05:00
Matt McWilliams
fb7b1e2fb6
Added an edge-case helper for choosing files/directories in linux. This finishes the requirement for issue #50 on linux, but will test changes on macOS before marking the issue resolved.
2021-02-24 10:05:45 -05:00
Matt McWilliams
c0121bcfe7
Have seemingly added the ability to use image sequences with the filmout feature with a few caveats. File selection is working on mac but was not on Linux. Also using this method only jpeg and png sequences can be used. This is not unacceptable, but the UI will have to be made more explicit about this limitation. I would like to support TIFF files but even now with single images they are rendered to PNG using ffmpeg.
2021-02-24 00:22:08 -05:00
Matt McWilliams
53d147b9bc
Add lstat and "directory" property onto the filmout.state object.
2021-02-23 19:53:22 -05:00
Matt McWilliams
ad1ac51fc8
Need to enableRemote in the electron browser window that gets created by filmout.
2021-02-23 16:16:17 -05:00
e84f1ce8ff
Add additional logging
2020-10-03 21:33:45 -04:00
8672b6584a
Work towards issue #52 . Adds a statement within the arduino.end() method that watches for an 'E' char byte and will alert the UI while pausing a running sequence. Needs to be in place for firmware to be able to throw errors to UI.
2020-09-29 13:48:06 -04:00
7c61af7043
Added logging to the arduino module to list all connected devices.
2020-08-18 14:20:43 -04:00
f02782d4da
Increment build to 1.6.4. Re-package and deploy for mac
2020-08-09 23:39:52 -04:00
Matt McWilliams
Matthew McWilliams
Matthew McWilliams
sixteenmillimeter