diff --git a/scad/jk_camera_controller_mod.scad b/scad/jk_camera_controller_mod.scad
new file mode 100644
index 0000000..e234518
--- /dev/null
+++ b/scad/jk_camera_controller_mod.scad
@@ -0,0 +1,111 @@
+
+
+module rounded_cube (c, d) {
+    r = d / 2;
+    scaled = [c[0] - d, c[1] - d, c[2] - d];
+    minkowski() {
+        sphere(r = r);
+        cube(scaled, center = true);
+    }
+}
+
+module case () {
+    $fn = 100;
+    
+    X = 75+1;
+    Y = 65+1;
+    Z = 35+1;
+    
+    MOUNT_X = 44.5;
+    MOUNT_Y = 33.5;
+    
+    MOUNT_Z1 = 4.5;
+    MOUNT_Z2 = 3;
+    
+    MOUNT_D1 = 5;
+    MOUNT_D2 = 2.5;
+    
+    MOUNT_OFFSET_X = 11;
+    MOUNT_OFFSET_Y = 2;
+    MOUNT_OFFSET_Z = 13.5;
+    
+    PLUG_D1 = 15.75;
+    PLUG_D2 = 20;
+    PLUG_Z = -2;
+    PLUG_OFFSET_X = -23;
+    
+    M5 = 5.75;
+    
+    difference () {
+        rounded_cube([X, Y, Z], d = 8);
+        //inner void
+        rounded_cube([X - 7, Y - 7, Z - 7], d = 5);
+        //top
+        translate([0, 0, -Z + 4]) cube([X + 1, Y + 1, Z], center = true);
+        //
+        translate([PLUG_OFFSET_X, 0, 10]) cylinder(r = PLUG_D1 / 2, h = 20, center = true);
+        translate([PLUG_OFFSET_X, 0, 5 - PLUG_Z]) cylinder(r = PLUG_D2 / 2, h = 20, center = true);
+        
+        //m5
+        translate([PLUG_OFFSET_X + 6, 20, 10]) cylinder(r = M5 / 2, h = 50, center = true);
+        translate([PLUG_OFFSET_X + 6, -20, 10]) cylinder(r = M5 / 2, h = 50, center = true);
+    }
+    translate([MOUNT_OFFSET_X, MOUNT_OFFSET_Y, 0]) rotate([0, 0, 90]) {
+        translate ([(MOUNT_X / 2), MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
+            cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
+            translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
+        }
+        translate ([-(MOUNT_X / 2), MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
+            cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
+            translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
+        }
+        translate ([(MOUNT_X / 2), -MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
+            cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
+            translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
+        }
+        translate ([-(MOUNT_X / 2), -MOUNT_Y / 2, MOUNT_OFFSET_Z]) {
+            cylinder(r = MOUNT_D1 / 2, h = MOUNT_Z1, center = true);
+            translate([0, 0, -(MOUNT_Z1 / 2) - (MOUNT_Z2 / 2)]) cylinder(r = MOUNT_D2 / 2, h = MOUNT_Z2, center = true);
+        }
+    }
+    //m5
+    translate([PLUG_OFFSET_X + 6, 20, 2]) difference () {
+        union () {
+            cylinder(r = 9 / 2, h = Z - 5, center = true);
+            translate([0, 0, Z / 2 - 6]) cylinder(r = 12 / 2, h = 6, center = true);
+        }
+        cylinder(r = M5 / 2, h = 50, center = true);
+    }
+    translate([PLUG_OFFSET_X + 6, -20, 2]) difference () {
+        union () {
+            cylinder(r = 9 / 2, h = Z - 5, center = true);
+            translate([0, 0, Z / 2 - 6]) cylinder(r = 12 / 2, h = 6, center = true);
+        }
+        cylinder(r = M5 / 2, h = 50, center = true);
+    }
+    translate([-(X / 2) + 4, Y / 5 , (Z / 2) - 5]) {
+            rotate([90, 0, 0]) cylinder(r = 3, h = 10, center = true);
+    }
+    translate([-(X / 2) + 4, -Y / 5 , (Z / 2) - 4]) {
+            rotate([90, 0, 0]) cylinder(r = 3, h = 10, center = true);
+    }
+    /*translate ([(X / 2) + 5, 0, -9.5]) difference () {
+        rounded_cube([15, 15, 5], d = 2);
+        translate([0, 0, -4]) cube([15, 15, 5], center = true);
+        translate([2, 0, 0]) cylinder(r = M5 / 2, h = 10, center = true);
+    }
+    translate ([-(X / 2) - 5, 0, -9.5]) difference () {
+        rounded_cube([15, 15, 5], d = 2);
+        translate([0, 0, -4]) cube([15, 15, 5], center = true);
+        translate([-2, 0, 0]) cylinder(r = M5 / 2, h = 10, center = true);
+    }*/
+}
+
+//intersection () {
+difference () {
+    case();
+    //translate([-23, 0, 0]) cube([100, 100, 100], center = true); 
+}
+//    translate([-14, 0, 12]) cube([10, 40, 10], center = true);
+//}
+