diff --git a/scad/oxberry_control_panel.scad b/scad/oxberry_control_panel.scad
new file mode 100644
index 0000000..5e23abb
--- /dev/null
+++ b/scad/oxberry_control_panel.scad
@@ -0,0 +1,81 @@
+PANEL_X = 72;
+PANEL_Y = 147;
+PANEL_Z = 3;
+
+CONNECTOR_D = 15.75; //?
+CONNECTOR_D2 = 18.1;
+CONNECTOR_D3 = 29;
+CONNECTOR_Z = 4;
+CONNECTOR_OFFSET_Y = 40;
+
+//max spacing of holes = 140
+//min spacing = 131
+
+SPACING_MIN = 131;
+SPACING_MAX = 140;
+SPACING = SPACING_MIN + ((SPACING_MAX - SPACING_MIN) / 2);
+SCREW_D = (SPACING_MAX - SPACING_MIN) / 2;
+
+RELAY_X = 44.4;
+RELAY_Y = 33.1;
+
+RELAY_D1 = 5;
+RELAY_D2 = 2.6;
+
+RELAY_H1 = 2;
+RELAY_H2 = 2;
+
+RELAY_OFFSET_Y = -30;
+
+module relay_post () {
+    $fn = 60;
+    union () {
+        cylinder(r = RELAY_D1 / 2, h = RELAY_H1 + (PANEL_Z / 2), center = true);
+        translate([0, 0, (RELAY_H1 / 2) + (RELAY_H2 / 2) + (PANEL_Z / 4)]) cylinder(r = RELAY_D2 / 2, h = RELAY_H2, center = true);
+   }
+}
+
+module oxberry_control_panel () {
+    $fn = 60;
+    difference () {
+        union () {
+            cube([PANEL_X, PANEL_Y, PANEL_Z], center = true);
+            //relay_mount
+            translate ([0, RELAY_OFFSET_Y, (PANEL_Z / 2) + (RELAY_H1 / 2)]) {
+                translate([RELAY_X / 2, RELAY_Y / 2, 0]) relay_post();
+                translate([-RELAY_X / 2, RELAY_Y / 2, 0]) relay_post();
+                translate([RELAY_X / 2, -RELAY_Y / 2, 0]) relay_post();
+                translate([-RELAY_X / 2, -RELAY_Y / 2, 0]) relay_post();
+            }
+            //reinforcement for connector
+            translate([0, CONNECTOR_OFFSET_Y, PANEL_Z / 2]) difference () {
+                cylinder(r = CONNECTOR_D3 / 2, h = CONNECTOR_Z, center = true, $fn = 100);
+                cylinder(r = CONNECTOR_D2 / 2, h = CONNECTOR_Z + 1, center = true, $fn = 100);
+            }
+        }
+        //voids for screws
+        translate([0, SPACING / 2, 0]) cylinder(r = SCREW_D / 2, h = PANEL_Z + 1, center = true);
+        translate([0, -SPACING / 2, 0]) cylinder(r = SCREW_D / 2, h = PANEL_Z + 1, center = true);
+        //void for connector
+        translate([0, CONNECTOR_OFFSET_Y, 0]) cylinder(r = CONNECTOR_D / 2, h = PANEL_Z + 1, center = true, $fn = 100);
+    }
+}
+
+module oxberry_control_panel_a () {
+    difference () {
+        oxberry_control_panel();
+        translate([0, PANEL_Y / 2, 0]) cube([PANEL_X + 1, PANEL_Y, 20], center = true);
+        cube([PANEL_X / 3, 10, 40], center = true);
+    }    
+}
+module oxberry_control_panel_b () {
+    difference () {
+        oxberry_control_panel();
+        oxberry_control_panel_a();
+    }
+    translate([0, 0, PANEL_Z]) cube([PANEL_X - 10, 15, PANEL_Z], center = true);    
+}
+
+oxberry_control_panel();
+//oxberry_control_panel_a();
+//oxberry_control_panel_b();