Gitignore

This commit is contained in:
mmcw-dev 2019-04-15 17:09:12 -04:00
parent 997f84eb49
commit 97322bcd9b
2 changed files with 22 additions and 22 deletions

1
.gitignore vendored Normal file
View File

@ -0,0 +1 @@
.AppleDouble

View File

@ -17,7 +17,7 @@ PANEL_Z = 3;
PANEL_X = BOLEX_X; PANEL_X = BOLEX_X;
PANEL_Y = 96; PANEL_Y = 96;
PANEL_OFFSET_Z = 42; PANEL_OFFSET_Z = 42 + 6;
PANEL_OFFSET_X = 0; PANEL_OFFSET_X = 0;
PANEL_OFFSET_Y = 20; PANEL_OFFSET_Y = 20;
@ -59,7 +59,7 @@ module panel () {
translate([-56.8 -2.25, (50 / 2) , 0]) cylinder(r = 5 / 2, h = 16, center = true); translate([-56.8 -2.25, (50 / 2) , 0]) cylinder(r = 5 / 2, h = 16, center = true);
translate([-56.8 -2.25, (50 / 2) - 50, 0]) cylinder(r = 5 / 2, h = 16, center = true); translate([-56.8 -2.25, (50 / 2) - 50, 0]) cylinder(r = 5 / 2, h = 16, center = true);
//center standoff void //center standoff void
translate([0, -PANEL_OFFSET_Y, 0]) translate([17, -6, 25]) cylinder(r = 8 / 2, h = 50, center = true); translate([0, -PANEL_OFFSET_Y, 0]) translate([17, -6, 20]) cylinder(r = 8 / 2, h = 50, center = true);
} }
} }
@ -88,7 +88,7 @@ module panel () {
} }
} }
//disk void //disk void
translate([0, 0, -1.9]) cylinder(r = STEPPER_VOID_D/ 2, h = 2, center = true, fn = 200); translate([0, 0, -1.9]) cylinder(r = STEPPER_VOID_D/ 2, h = 2, center = true, $fn = 200);
cylinder(r = 5.5 / 2, h = 20, center = true); cylinder(r = 5.5 / 2, h = 20, center = true);
} }
@ -105,7 +105,7 @@ module stepper_void (H = 10) {
} }
} }
//disk void //disk void
translate([0, 0, -1.9]) cylinder(r = STEPPER_VOID_D/ 2, h = H, center = true, fn = 200); translate([0, 0, -1.9]) cylinder(r = STEPPER_VOID_D/ 2, h = H, center = true, $fn = 200);
cylinder(r = 5.5 / 2, h = 20, center = true, $fn = 100); cylinder(r = 5.5 / 2, h = 20, center = true, $fn = 100);
} }
@ -209,7 +209,7 @@ module stepper () {
} }
} }
//disk void //disk void
translate([0, 0, -1.9]) cylinder(r = STEPPER_VOID_D/ 2, h = H, center = true, fn = 200); translate([0, 0, -1.9]) cylinder(r = STEPPER_VOID_D/ 2, h = H, center = true, $fn = 200);
cylinder(r = 5.5 / 2, h = 20, center = true, $fn = 100); cylinder(r = 5.5 / 2, h = 20, center = true, $fn = 100);
translate([0,0,-(H / 2) - (SHAFT_H / 2) - 1.9]) difference(){ translate([0,0,-(H / 2) - (SHAFT_H / 2) - 1.9]) difference(){
cylinder(r = SHAFT_D / 2 , h = SHAFT_H, center = true); cylinder(r = SHAFT_D / 2 , h = SHAFT_H, center = true);
@ -231,11 +231,12 @@ module back_support () {
//rounded_cube([32 , 57, 18], d = 6, center = true); //rounded_cube([32 , 57, 18], d = 6, center = true);
union () { union () {
translate([0, -(57 / 2) + (A / 2), 0]) rounded_cube([32, A, 18], d = 6, center = true); translate([0, -(57 / 2) + (A / 2), 0]) rounded_cube([32, A, 18], d = 6, center = true);
translate([(32 / 2) - 8, (57 / 2) - (B / 2) , 0]) rounded_cube([18, B, 18], d = 6, center = true); translate([(32 / 2) - 8, (57 / 2) - (B / 2) + 3 , 0]) rounded_cube([18, B + 10, 18], d = 6, center = true);
} }
} }
//void for panel //void for panel
translate([15, 0, 23.5]) cube([20, 40, 3.1], center = true); translate([15, 0, 23.5 + 6]) cube([20, 40, 3.1], center = true);
translate([13, 0, -37]) cube([32 , 18 + 1, 57], center = true); translate([13, 0, -37]) cube([32 , 18 + 1, 57], center = true);
translate([25, 0, -10]) cube([32 , 18 + 1, 57], center = true); translate([25, 0, -10]) cube([32 , 18 + 1, 57], center = true);
translate([.3, 0, -18.5]) rotate([0, 90, 0]) { translate([.3, 0, -18.5]) rotate([0, 90, 0]) {
@ -282,8 +283,8 @@ module front_support() {
difference () { difference () {
translate([-2.50, 0, 0]) rotate([90, 0, 0]) union() { translate([-2.50, 0, 0]) rotate([90, 0, 0]) union() {
//rounded_cube([45, 70, 18], d = 6, center = true); //rounded_cube([45, 70, 18], d = 6, center = true);
translate([0, -(70 / 2) + (42 / 2), 0])rounded_cube([45, 42, 18], d = 6, center = true); translate([0, -(70 / 2) + (42 / 2), 0]) rounded_cube([45, 42, 18], d = 6, center = true);
translate([0, (70 / 2) - (35 / 2), 0])rounded_cube([45, 35, 18], d = 6, center = true); translate([-14.5, (70 / 2) - (35 / 2) + 3, 0]) rounded_cube([45, 35 + 8, 18], d = 6, center = true);
} }
translate([-12.5, 0, -11]) rotate([90, 0, 0]) { translate([-12.5, 0, -11]) rotate([90, 0, 0]) {
difference() { difference() {
@ -292,9 +293,9 @@ module front_support() {
} }
} }
//void for panel //void for panel
translate([-15, 0, 29]) cube([20, 40, 3.1], center = true); translate([-15 - 15, 0, 29 + 6]) cube([20, 40, 3.1], center = true);
//top bolt //top bolt
translate([-16, 0, 29]) cylinder(r = 5 / 2, h = 25, center = true); translate([-16 - 15.5, 0, 29]) cylinder(r = 5 / 2, h = 40, center = true);
//bolt shaft and hex //bolt shaft and hex
translate([10, 0, -25 + 3]) rotate([0, 90, 0]) { translate([10, 0, -25 + 3]) rotate([0, 90, 0]) {
cylinder(r = 5 / 2, h = 26, center = true); cylinder(r = 5 / 2, h = 26, center = true);
@ -302,8 +303,8 @@ module front_support() {
translate([0, 0, 6.5]) cylinder(r = 8.9 / 2, h = 3.5, center = true, $fn = 6); translate([0, 0, 6.5]) cylinder(r = 8.9 / 2, h = 3.5, center = true, $fn = 6);
} }
//void for shelf //void for shelf
translate([17, 0, 25]) rotate([90, 0, 0]) rounded_cube([30, 35, 19], d = 6, center = true); translate([17 - 11, 0, 27]) rotate([90, 0, 0]) rounded_cube([30, 40, 19], d = 6, center = true);
translate([-25, 0, 5]) rotate([90, 0, 0]) rounded_cube([30, 35, 19], d = 6, center = true); translate([-25 - 14.5, 0, 5 + 5]) rotate([90, 0, 0]) rounded_cube([30, 35, 19], d = 6, center = true);
} }
@ -349,7 +350,7 @@ module center_stand () {
//translate([17, -6, 25]) center_stand(); //translate([17, -6, 25]) center_stand();
//translate([0, 0, -24]) bolex(); //translate([0, 0, -24]) bolex();
translate([(170 / 2) - (147.3 - 135), (BOLEX_Y / 2) - 47.8, -12 + 3]) { translate([(170 / 2) - (147.3 - 135) + 11.5 + 4, (BOLEX_Y / 2) - 47.8, -12 + 3]) {
//translate([0, FRONT_SPACING_Z / 2, 0]) rotate([0, -90, 0]) front_clamp(); //translate([0, FRONT_SPACING_Z / 2, 0]) rotate([0, -90, 0]) front_clamp();
//translate([0, -FRONT_SPACING_Z / 2, 0]) rotate([0, -90, 0]) front_clamp(); //translate([0, -FRONT_SPACING_Z / 2, 0]) rotate([0, -90, 0]) front_clamp();
} }
@ -360,30 +361,28 @@ translate([SHAFT_POSITION_X, SHAFT_POSITION_Y, 12]) difference() {
//key(); //key();
//translate([50, 0, 0]) cube([100, 100, 100], center = true); //translate([50, 0, 0]) cube([100, 100, 100], center = true);
} }
//translate([PANEL_OFFSET_X, PANEL_OFFSET_Y, PANEL_OFFSET_Z]) panel(); translate([PANEL_OFFSET_X, PANEL_OFFSET_Y, PANEL_OFFSET_Z]) panel();
//projection() panel(); //projection() panel();
//translate([SHAFT_POSITION_X, SHAFT_POSITION_Y, 60]) stepper(); //translate([SHAFT_POSITION_X, SHAFT_POSITION_Y, PANEL_OFFSET_Z + 18]) stepper();
//mount_base(); //mount_base();
//translate([-20, 15, 55]) arduino(); //translate([-20, 15, 55]) arduino();
/*translate([-5, 20, 63]) color([0, 0, 1], 0.2) difference () { /*translate([-5, 20, 63]) color([0, 0, 1], 0.2) difference () {
cube([96, 96, 40], center = true); cube([96, 96, 40], center = true);
translate([0, 0, -3]) cube([96 - 6, 96 - 6, 40 - 3], center = true); translate([0, 0, -3]) cube([96 - 6, 96 - 6, 40 - 3], center = true);
}*/ }*/
translate([(170 / 2) - (147.3 - 135), -10, 13]) { translate([(170 / 2) - (147.3 - 135) + 11.5 + 4, -10, 13]) {
//difference () { //difference () {
//front_support(); //front_support();
//translate([0, 50, 0]) cube([100, 100, 200], center = true); //translate([0, 50, 0]) cube([100, 100, 200], center = true);
//} //}
} }
//translate([30, 0, -35]) rotate([180, 0, 0]) //translate([30, 0, -35]) rotate([180, 0, 0]) front_support();
front_support();
//translate([30 + 18, 0, -35 - 18]) rotate([180, 0, 0]) front_support(); //translate([30 + 18, 0, -35 - 18]) rotate([180, 0, 0]) front_support();
//translate([(170 / 2) - (147.3 - 135), -10 + FRONT_SPACING_Z , 13]) front_support(); translate([(170 / 2) - (147.3 - 135) + 11.5 + 4, -10 + FRONT_SPACING_Z , 13]) front_support();
//translate([0, 20, 50],) cylinder(r = 5, h = 28, center = true); //translate([0, 20, 50],) cylinder(r = 5, h = 28, center = true);
//translate([-(170 / 2) + (147.3 - 135) + 1.5, 20, 0]) rotate([0, -90, 0]) back_clamp(); //translate([-(170 / 2) + (147.3 - 135) + 1.5, 20, 0]) rotate([0, -90, 0]) back_clamp();
//translate([-(170 / 2) + (147.3 - 135), (BODY_Y / 2) - 25 , 18.5]) translate([-(170 / 2) + (147.3 - 135), (BODY_Y / 2) - 25 , 18.5]) back_support();
//back_support();
//translate([15, 0, -15]) back_support(); //translate([15, 0, -15]) back_support();
translate([-(170 / 2) + (147.3 - 135), (BODY_Y / 2) - 25 - 50 , 18.5]){ translate([-(170 / 2) + (147.3 - 135), (BODY_Y / 2) - 25 - 50 , 18.5]){
//difference () { //difference () {