509 lines
18 KiB
OpenSCAD
509 lines
18 KiB
OpenSCAD
include <./modules.scad>
|
|
include <./variables.scad>
|
|
|
|
module l289N_holes (r = 3/2 - .2) {
|
|
$fn = 60;
|
|
DISTANCE = 36.5;
|
|
H = 50;
|
|
translate([0, 0, 0]) cylinder(r = r, h = H * 5, center = true);
|
|
translate([DISTANCE, 0, 0]) cylinder(r = r, h = H * 5, center = true);
|
|
translate([DISTANCE, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
|
|
translate([0, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
|
|
}
|
|
|
|
module l289N_hole_test () {
|
|
$fn = 40;
|
|
difference () {
|
|
cube([140, 40, 3], center = true);
|
|
cylinder(r = 3/2, h = 50, center = true);
|
|
translate([7, 0, 0]) cylinder(r = 3/2, h = 50, center = true);
|
|
translate([7 * 2, 0, 0]) cylinder(r = 3/2 - .1, h = 50, center = true);
|
|
translate([7 * 3, 0, 0]) cylinder(r = 3/2 - .2, h = 50, center = true);
|
|
translate([7 * 4, 0, 0]) cylinder(r = 3/2 - .3, h = 50, center = true);
|
|
}
|
|
}
|
|
|
|
module intval_panel_laser () {
|
|
$fn = 40;
|
|
difference () {
|
|
union () {
|
|
difference () {
|
|
translate ([0, 0, 8.5]) {
|
|
union () {
|
|
translate([12, -5, 0]) {
|
|
rotate([0, 0, -13]) {
|
|
rounded_cube([panel_2_x + 20, panel_2_y, 25.4/8], d = 20, center = true);
|
|
}
|
|
}
|
|
//reinforces
|
|
//translate([54, -12, -3]) rotate([0, 0, 89]) rounded_cube([110, 20, 4], 20, center = true);
|
|
//translate([-17, 2, -3]) rotate([0, 0, 72]) rounded_cube([94, 13, 4], 13, center = true);
|
|
}
|
|
}
|
|
for (i = [0 : len(xArray) - 1]) {
|
|
bolex_pin_inner_laser(xArray[i], yArray[i]);
|
|
}
|
|
}
|
|
//onetoone(26, 10, 4.5);
|
|
//extends for onetoone
|
|
|
|
|
|
}
|
|
//onetoone(9, 14, 8.5);
|
|
bearing_laser(54.5, 12, 6, width= 18, hole=false);
|
|
translate([-38, -1, 0]) rotate([0, 0, -13]) l289N_holes();
|
|
//translate ([6, -9, height + 3.5]) cylinder(r = bolt_inner, h = 50, center = true); //cover standoff hole
|
|
//frame_counter_access(); //use the space
|
|
m_p_access();
|
|
remove_front();
|
|
translate([6, 18, 0]) rotate([0, 0, -13]) cube([15, 25, 40], center=true); //motor wind key hole
|
|
|
|
for (i = [0 : len(mm_x) - 1]) {
|
|
translate([mm_x[i], mm_y[i], 0]) cylinder(r = bolt_inner, h = 100, center = true);
|
|
}
|
|
intval_laser_panel_cover();
|
|
}
|
|
}
|
|
|
|
module intval_panel_laser_debug () {
|
|
$fn = 40;
|
|
difference () {
|
|
union () {
|
|
difference () {
|
|
translate ([0, 0, 8.5]) {
|
|
union () {
|
|
translate([12 - 32.5, -5 + 9, 0]) {
|
|
rotate([0, 0, -13]) {
|
|
rounded_cube([panel_2_x + 20 + 65, panel_2_y, 25.4/8], d = 20, center = true);
|
|
}
|
|
}
|
|
//reinforces
|
|
//translate([54, -12, -3]) rotate([0, 0, 89]) rounded_cube([110, 20, 4], 20, center = true);
|
|
//translate([-17, 2, -3]) rotate([0, 0, 72]) rounded_cube([94, 13, 4], 13, center = true);
|
|
}
|
|
}
|
|
for (i = [0 : len(xArray) - 1]) {
|
|
bolex_pin_inner_laser(xArray[i], yArray[i]);
|
|
}
|
|
}
|
|
//onetoone(26, 10, 4.5);
|
|
//extends for onetoone
|
|
|
|
|
|
}
|
|
//onetoone(9, 14, 8.5);
|
|
bearing_laser(54.5, 12, 6, width= 18, hole=false);
|
|
translate([-38, -1, 0]) rotate([0, 0, -13]) l289N_holes();
|
|
//translate ([6, -9, height + 3.5]) cylinder(r = bolt_inner, h = 50, center = true); //cover standoff hole
|
|
//frame_counter_access(); //use the space
|
|
m_p_access();
|
|
remove_front();
|
|
translate([6, 18, 0]) rotate([0, 0, -13]) cube([15, 25, 40], center=true); //motor wind key hole
|
|
|
|
for (i = [0 : len(mm_x) - 1]) {
|
|
translate([mm_x[i], mm_y[i], 0]) cylinder(r = bolt_inner, h = 100, center = true);
|
|
}
|
|
intval_laser_panel_cover(DEBUG = true);
|
|
translate ([4, 12, 0]) {
|
|
translate([-51.5, -8.5, 0]) cylinder(r = 2.8/2, h = 100, center = true);
|
|
translate([-51.5 - 66, -8.5 + 15, 0]) cylinder(r = 2.8/2, h = 100, center = true);
|
|
translate([-51.5 + 11.5, -8 + 49, 0]) cylinder(r = 2.8/2, h = 100, center = true);
|
|
translate([-51.5 - 54.5, -8.5 + 49 + 16, 0]) cylinder(r = 2.8/2, h = 100, center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module bolex_pin_laser (x, y) {
|
|
in = innerD;
|
|
$fn = 120;
|
|
translate ([x, y, 1]) {
|
|
difference () {
|
|
union () {
|
|
translate([0, 0, (height / 2) - 3]) cylinder(r = (outerD + 5) / 2, h = 2, center = true);
|
|
translate([0, 0, 1.175/2]) cylinder(r = outerD / 2, h = height + 1.175 , center = true);
|
|
}
|
|
cylinder(r = in / 2, h = height * 2, center = true);
|
|
translate([0, 0, (height / 2) - 1.9]) cylinder(r1 =4.5 / 2, r2 = 6.7 / 2, h = 2, center = true);
|
|
translate([0, 0, (height / 2) + 1]) cylinder(r = 6.7 / 2, h = 4, center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module intval_laser_standoffs () {
|
|
$fn = 40;
|
|
for (i = [0 : len(xArray) - 1]) {
|
|
bolex_pin_laser(xArray[i], yArray[i]);
|
|
}
|
|
}
|
|
|
|
module intval_laser_standoffs_plate () {
|
|
$fn = 40;
|
|
rotate ([0, 180, 0]) {
|
|
bolex_pin_laser(0, 0);
|
|
bolex_pin_laser(15, 0);
|
|
bolex_pin_laser(0, 15);
|
|
bolex_pin_laser(15, 15);
|
|
}
|
|
//decoys
|
|
//translate([7, 7, 0]) decoys(23, 5.5, 6);
|
|
}
|
|
|
|
module bolex_pin_inner_laser (x, y) {
|
|
$fn = 40;
|
|
//innerD = 6.75;
|
|
innerD = 9;
|
|
translate ([x, y, 1]) {
|
|
cylinder(r = innerD / 2, h = height * 2, center = true);
|
|
//translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
|
|
}
|
|
}
|
|
|
|
module bearing_laser (x, y, z, width= 8, hole = true) {
|
|
innerD = 8.05;
|
|
outerD = 22.1 - .4;
|
|
fuzz = 0.1;
|
|
translate ([x, y, z]) {
|
|
difference () {
|
|
cylinder(r = outerD / 2 + fuzz, h = width, center = true);
|
|
if (hole) {
|
|
cylinder(r = innerD / 2 - fuzz, h = width, center = true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module intval_laser_panel_cover (LASER = false, DEBUG = false, ALL_RED = false) {
|
|
$fn = 60;
|
|
cover_h = 16 + 3 + 4;
|
|
MATERIAL = 25.4 / 8;
|
|
|
|
module top () {
|
|
difference () {
|
|
rotate([0, 0, -13]) {
|
|
rounded_cube([100, panel_2_y, MATERIAL], d = 20, center = true);
|
|
}
|
|
translate([53, 12, 0]) cylinder(r = 30, h = 60, center = true); //hole for motor mount
|
|
translate([22, 20, 0]) cylinder(r = 8, h = 60, center = true); // hole for moto mount bolt holder
|
|
translate([53, 42, 0]) cylinder(r = 15, h = 60, center = true); //removes pointy part
|
|
translate([-44, 8, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([0, 90, 0]) back_side();
|
|
translate([2, 49, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([90, 0, 0]) top_side();
|
|
translate([-22, -45, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([90, 0, 0]) bottom_side();
|
|
for (i = [0 : len(xArray) - 1]) {
|
|
translate([xArray[i], yArray[i], 0]) cylinder(r = 7 / 2, h = height * 20, center = true); //top standoff access
|
|
}
|
|
translate ([8, -9, height + 3.5]) cylinder(r = bolt_inner - .5, h = 50, center = true); //bottom standoff access
|
|
}
|
|
|
|
}
|
|
module back_side () {
|
|
difference () {
|
|
translate([0, 1.75, 0]) cube([cover_h + 2 + (MATERIAL * 2) + 1 + 3, panel_2_y - 10, MATERIAL], center = true);
|
|
translate([-13 - 3.1, 20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
|
|
translate([-13 - 3.1, -20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
|
|
translate([13 + 3.1, 20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
|
|
translate([13 + 3.1, -20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
|
|
translate([10 , -22 ,0]) cube([10, 15, 30], center = true); //access for usb
|
|
translate([0, 50.5, 0]) cube([17.5, MATERIAL, MATERIAL], center = true);
|
|
translate([0, -50.5 + (1.75 / 2) + MATERIAL - 0.25, 0]) cube([17.5, MATERIAL, MATERIAL], center = true);
|
|
}
|
|
|
|
}
|
|
|
|
module top_side () {
|
|
difference () {
|
|
translate([-2.5, 0, 0]) cube([ panel_2_x - 41, cover_h + 2 + (MATERIAL * 2) + 1 + 3, MATERIAL], center = true);
|
|
translate([28, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
translate([-28, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
translate([28, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
translate([-28, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
|
|
translate([-35.5, -13 - 8.1, 0]) cube([MATERIAL, 25, MATERIAL], center = true); //side tabs
|
|
translate([-35.5, 13 + 8.1, 0]) cube([MATERIAL, 25, MATERIAL], center = true); //side tabs
|
|
}
|
|
|
|
}
|
|
|
|
module bottom_side () {
|
|
difference () {
|
|
translate([.25, 0, 0]) cube([ panel_2_x - 39.5, cover_h + 2 + (MATERIAL * 2) + 1 + 3, MATERIAL], center = true);
|
|
translate([25, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
translate([-25, -13 - 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
translate([30, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
translate([-30, 13 + 3.1, 0]) cube([25, MATERIAL, MATERIAL], center = true);
|
|
translate([-15, 1, 0]) cylinder(r = 6/2, h = 50, center = true); //hole for audio jack -> add countersink
|
|
translate([9, 1, 0]) cylinder(r = 8/2, h = 20, center = true); //hole for female DC power jack, 12vdc
|
|
|
|
translate([-33.5, 17.3, 0]) cube([MATERIAL, 17.5, MATERIAL], center = true);
|
|
translate([-33.5, -17.3, 0]) cube([MATERIAL, 17.5, MATERIAL], center = true);
|
|
}
|
|
|
|
|
|
}
|
|
|
|
if (LASER) {
|
|
projection() top();
|
|
if (!DEBUG) {
|
|
translate([-75, 0, 0]) rotate([0, 0, -13]) projection() back_side();
|
|
}
|
|
translate([0, 80, 0]) rotate([0, 0, -13]) projection() top_side();
|
|
translate([0, -80, 0]) rotate([0, 0, -13]) projection() bottom_side();
|
|
} else {
|
|
translate([0, 0, height + cover_h]) top();
|
|
if (!DEBUG) {
|
|
translate([-44, 8, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([0, 90, 0]) back_side();
|
|
}
|
|
translate([2, 49, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([90, 0, 0]) top_side();
|
|
translate([-22, -45, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([90, 0, 0]) bottom_side();
|
|
}
|
|
}
|
|
|
|
module intval_laser_panel_cover_standoff (DECOYS = false) {
|
|
tight = 0.2;
|
|
cover_h = 21;
|
|
$fn = 40;
|
|
translate ([6, -9, height + 3.5]) {
|
|
difference() {
|
|
cylinder(r = bolt_inner + 1.4, h = cover_h - .5, center = true);
|
|
cylinder(r = bolt_inner - tight, h = cover_h, center = true);
|
|
}
|
|
if (DECOYS) {
|
|
decoys(12, -(cover_h / 2) + 2);
|
|
}
|
|
}
|
|
}
|
|
|
|
module remove_front () {
|
|
|
|
translate([87, 0, 4]) rotate([0, 0, 89]) cube([170, 40, 40], center = true);
|
|
}
|
|
module onetoone (size, height, z) {
|
|
translate ([one_to_one_x, one_to_one_y, z]) {
|
|
cylinder(r = size / 2, h = height, center = true);
|
|
}
|
|
}
|
|
module m_p_access () {
|
|
translate ([18, -44, 0]) {
|
|
rounded_cube([35, 17, 50], 17, true);
|
|
}
|
|
}
|
|
module bolex_pin (x, y) {
|
|
in = innerD;
|
|
translate ([x, y, 1]) {
|
|
difference () {
|
|
union () {
|
|
translate([0, 0, (height / 2) - 2]) cylinder(r = (outerD + 4) / 2, h = 4, center = true);
|
|
cylinder(r = outerD / 2, h = height, center = true);
|
|
}
|
|
cylinder(r = in / 2, h = height, center = true);
|
|
translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
|
|
}
|
|
}
|
|
}
|
|
module bolex_pin_inner (x, y) {
|
|
translate ([x, y, 1]) {
|
|
cylinder(r = innerD / 2, h = height * 2, center = true);
|
|
translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
|
|
}
|
|
}
|
|
module intval_pins () {
|
|
for (i = [0 : len(xArray) - 1]) {
|
|
bolex_pin(xArray[i], yArray[i]);
|
|
}
|
|
}
|
|
module key () {
|
|
tighten = 0.25;
|
|
difference () {
|
|
cylinder(r = 6.7 / 2, h = 5, center = true);
|
|
cylinder(r = (4.76 -+ tighten) / 2, h = 5, center = true);
|
|
}
|
|
translate ([0, 0, -7.5]) {
|
|
cylinder(r = 6.7 / 2, h = 10, center = true);
|
|
}
|
|
}
|
|
module keyHole () {
|
|
translate ([0, 0, 1.75]) {
|
|
cube([10, 2, 3.5], center = true);
|
|
}
|
|
}
|
|
module key_end (rotArr = [0, 0, 0], transArr = [0, 0, 0], ALT = false) {
|
|
translate(transArr) {
|
|
rotate (rotArr) {
|
|
difference () {
|
|
key();
|
|
keyHole();
|
|
if (ALT) {
|
|
translate([-2.5, 0, 1.75]) cube([5, 3, 3.5], center= true);
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
}
|
|
module frame_counter_access () {
|
|
x = 37.5;
|
|
y = 39;
|
|
translate([x, y, 8.5]) {
|
|
difference () {
|
|
union () {
|
|
rotate ([0, 0, 19]) {
|
|
translate([0, 9, 0]) {
|
|
cube([12, 16, 4], center = true);
|
|
}
|
|
}
|
|
rotate ([0, 0, -19]) {
|
|
translate([0, 9, 0]) {
|
|
cube([12, 16, 4], center = true);
|
|
}
|
|
}
|
|
}
|
|
translate([0, 15.5, 0]) {
|
|
cube([17, 6, 4], center = true);
|
|
}
|
|
}
|
|
cylinder(r = 6.2, h = 4, center = true);
|
|
}
|
|
}
|
|
module bearing (x, y, z, width= 8, hole = true, calval = 0) {
|
|
innerD = 8.05;
|
|
outerD = 22.1;
|
|
fuzz = 0.1;
|
|
translate ([x, y, z]) {
|
|
difference () {
|
|
cylinder(r = outerD / 2 + fuzz + calval, h = width, center = true);
|
|
if (hole) {
|
|
cylinder(r = innerD / 2 - fuzz, h = width, center = true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module panel_cover (DECOYS = false) {
|
|
$fn = 60;
|
|
HEIGHT = 85;
|
|
WIDTH = 37;
|
|
z = 25 + 8 + 5;
|
|
translate([0, 0, (z/2) + 9.5]) {
|
|
difference () {
|
|
union () {
|
|
difference () {
|
|
rounded_cube([WIDTH, HEIGHT, z], d = 20, center = true); //main body of case
|
|
translate([0, 0, -1]) rounded_cube([WIDTH - 4, HEIGHT - 4, z-2], d = 18, center = true);
|
|
translate([-5, 35, 5]) rotate([0, 0, 15]) cube([50, 25, 400], center = true); //heatsink
|
|
translate([-10, 12, -9]) rotate([0, 0, 13]) cube([70, 40, 20], center = true); //L289N hole
|
|
translate([13, -36, -15]) rotate([0, 0, 13])cube([24, 45, 8], center = true); //trinket
|
|
//buttons
|
|
translate([7, -32, 8]) cylinder(r = 3.1, h = 190, center = true);
|
|
translate([7, -19, 8]) cylinder(r = 3.1, h = 190, center = true);
|
|
translate([7, -5, 8]) cylinder(r = 3.1, h = 190, center = true);
|
|
|
|
translate([-20, -30, 0]) rotate([90, 0, 90]) cylinder(r = 1.75, h = 10, center = true); //hole for trigger cable
|
|
translate([-20, -30, -19]) cube([15, 0.5, 40], center = true);
|
|
translate([-15, -20, 0]) rotate([90, 0, 90]) cylinder(r = 3.1, h = 19, center = true); //power
|
|
|
|
translate([-5, -12, 7]) cylinder(r= 2, h = z + 5, center= true); //LED
|
|
}
|
|
// translate([-5, -26.5, 0]) cylinder(r = 5, h = z, center = true);
|
|
}
|
|
translate([-5, -26.5, 0]) cylinder(r = 4, h = z + 10, center = true); //access hole for
|
|
}
|
|
|
|
}
|
|
|
|
//decoys
|
|
if (DECOYS){
|
|
DECOY_H = 40.5;
|
|
DECOY_W = 28;
|
|
translate([DECOY_W, 33, DECOY_H]) cube([4, 4, 4], center = true);
|
|
translate([DECOY_W, -40, DECOY_H]) cube([4, 4, 4], center = true);
|
|
translate([-DECOY_W, 20, DECOY_H]) cube([4, 4, 4], center = true);
|
|
translate([-DECOY_W, -40, DECOY_H]) cube([4, 4, 4], center = true);
|
|
translate([-DECOY_W, -10, DECOY_H]) cube([4, 4, 4], center = true);
|
|
translate([DECOY_W, -10, DECOY_H]) cube([4, 4, 4], center = true);
|
|
}
|
|
}
|
|
|
|
module button_nuts () {
|
|
difference () {
|
|
cylinder(r = 5, h = 2, center = true, $fn = 6);
|
|
cylinder(r = 3.1, h = 19, center = true, $fn = 60);
|
|
}
|
|
}
|
|
|
|
module button_nuts_plate (decoys = false) {
|
|
|
|
translate([0, 0, 0]) button_nuts();
|
|
translate([0, 11, 0]) button_nuts();
|
|
translate([11, 11, 0]) button_nuts();
|
|
translate([11, 0, 0]) button_nuts();
|
|
translate([22, 0, 0]) button_nuts();
|
|
translate([22, 11, 0]) button_nuts();
|
|
|
|
if (decoys){
|
|
translate([30, 24, 1]) cube([4, 4, 4], center = true);
|
|
translate([30, -14, 1]) cube([4, 4, 4], center = true);
|
|
translate([-10, 24, 1]) cube([4, 4, 4], center = true);
|
|
translate([-10, -14, 1]) cube([4, 4, 4], center = true);
|
|
}
|
|
}
|
|
|
|
module key_cap () {
|
|
$fn = 40;
|
|
outerD = 22.1;
|
|
fuzz = 0.1;
|
|
difference () {
|
|
cylinder(r = outerD / 2 + fuzz + 1, h = 18, center = true);
|
|
translate([0, 0, -1]) cylinder(r = outerD / 2, h = 16, center = true);
|
|
}
|
|
//decoys(23, 7);
|
|
}
|
|
|
|
module motor_cap (DECOYS = false, HALF = false) {
|
|
$fn = 60;
|
|
base_d = 47;
|
|
difference () {
|
|
translate([-6, 0, 40]) cylinder(r = base_d/2, h = 52, center = true);
|
|
translate([-6, 0, -5.75]) cylinder(r = base_d/2 - 1, h = 50, center = true);
|
|
translate([-6, 0, 39]) cylinder(r = base_d/2 - 3, h = 50, center = true);
|
|
translate([-25, 0, 19]) cube([10, 10, 15], center = true); //wire access
|
|
if (HALF){
|
|
translate([100, 0, 0]) cube([200, 200, 200], center = true);
|
|
}
|
|
}
|
|
if (DECOYS) {
|
|
translate([-6, 0, 0]) decoys(32, 64);
|
|
}
|
|
}
|
|
module motor_cap_120 (HALF = false) {
|
|
$fn = 60;
|
|
base_d = 47;
|
|
base_inner = 29;
|
|
inner_h = 57;
|
|
difference () {
|
|
union () {
|
|
translate([-6, 0, 24]) cylinder(r = base_d/2, h = 15, center = true);
|
|
translate([0, 0, inner_h]) cylinder(r=(base_inner / 2) + 3, h=inner_h, center = true);
|
|
}
|
|
translate([-6, 0, -5.75]) cylinder(r = base_d/2 - 1, h = 50, center = true); //to grip edge of
|
|
translate([-6, 0, 3]) cylinder(r = base_d/2 - 3, h = 50, center = true);
|
|
translate([-25, 0, 19]) cube([10, 10, 15], center = true); //wire access
|
|
|
|
//120 motor
|
|
|
|
translate([0, 0, inner_h - 2]) cylinder(r=base_inner / 2, h=inner_h, center = true); //inner cylinder
|
|
|
|
if (HALF){
|
|
translate([100, 0, 0]) cube([200, 200, 200], center = true);
|
|
}
|
|
}
|
|
}
|
|
|
|
module bearing_calibrate (val = 0) {
|
|
mat = 25.4/8;
|
|
difference () {
|
|
cube([40, 40, mat], center = true);
|
|
bearing(0, 0, 0, hole = false, calval = val);
|
|
}
|
|
}
|
|
|
|
|