diff --git a/.gitignore b/.gitignore
index b512c09..b34b195 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1 +1,5 @@
-node_modules
\ No newline at end of file
+node_modules
+run_dev.sh
+state
+*/.DS_Store
+.DS_Store
diff --git a/Readme.md b/Readme.md
index 2034e74..f0ab4f0 100644
--- a/Readme.md
+++ b/Readme.md
@@ -1,2 +1,55 @@
-# intval3
+# INTVAL3
+### What is this?
+
+INTVAL3 is an open source intervalometer for the Bolex 16mm camera. The goal of the project is to create a cheap-to-make intervalometer that can be used to automate time-lapse or animation on the Bolex using mobile, web or physical controls.
+
+This is the third incarnation of the INTVAL project, this time utilizing the [Raspberry Pi Zero W](https://www.raspberrypi.org/products/raspberry-pi-zero-w/) for Wifi and Bluetooth control. Earlier versions, the [INTVAL](https://github.com/sixteenmillimeter/INTVAL) and [INTVAL2](https://github.com/sixteenmillimeter/intval2) were Arduino-based. The original INTVAL used a solenoid (!!!) to hammer a camera release cable, while the second attempt was a proving ground for the motor-and-key hardware used in this version.
+
+The [INTVAL2](https://github.com/sixteenmillimeter/intval2) project should be used if you prefer a simpler, physical interface approach.
+
+### Components
+
+* [Firmware](#firmware) for the Raspberry Pi Zero W running [Node.js](https://nodejs.org) on Raspian
+* [Mobile app](#mobile) for controlling device using [Cordova](https://cordova.apache.org/) + [Bleno](https://github.com/sandeepmistry/bleno)
+* [Web app](#web) for controlling device using [Restify](http://restify.com/)
+* Hardware files, parts models for 3D printing, laser cutting and CNC
+* PCB design for a Raspberry Pi Zero W Bonnet
+* [Parts list](#parts-list)
+
+
+
+## Firmware
+
+The firmware of the INTVAL3 is a node.js application running on the Raspian OS intended for installation on the Raspberry Pi Zero W.
+
+
+
+## Mobile App
+
+The INTVAL3 mobile app controls the intervalometer over Bluetooth. It can be used to configure the settings on the intervalometer such as exposure length, delay between frames and the direction of the film. The app can also be used to trigger individual frames, as well as start and stop sequences. As an experimental feature, film exposure settings can be determined with the camera on a mobile device.
+
+
+
+## Web App
+
+As a function of the firmware, there is an embedded web application that is hosted on the INTVAL3. When connected to a wifi network (via the mobile app) users are able to control the intervalometer from a browser. Users are also able to trigger functions and change settings on the intervalometer firmware from the command line by using cURL or wget, so actions can be scripted and automated from an external machine.
+
+
+
+## Hardware
+
+All of the non-electronic hardware is generated from OpenSCAD scripts and built into either STL files for 3D printing or DXF files for laser cutting or CNCing.
+
+Electronics designs are available in the form of a Fritzing file, a wiring diagram and a mask image that can be used to fabricate a board from a blank PCB. One of the easiest ways to
+
+
+
+## PARTS
+
+1. Raspberry Pi Zero W - [[Adafruit](https://www.adafruit.com/product/3400)] [[Sparkfun](https://www.sparkfun.com/products/14277)]
+2. L298N Breakout Board - ?
+3. 120RPM 12VDC Motor - ?
+4. Microswitch w/ Roller - [[Adafruit](https://www.adafruit.com/product/819)]
+5. L7805 5V Regulator - [[Adafruit](https://www.adafruit.com/product/2164)] [Sparkfun](https://www.sparkfun.com/products/107)]
+6. (Optional) Proto Bonnet - [[Adafruit](https://www.adafruit.com/product/3203)]
\ No newline at end of file
diff --git a/app/.gitignore b/app/.gitignore
new file mode 100644
index 0000000..2a65dcb
--- /dev/null
+++ b/app/.gitignore
@@ -0,0 +1,5 @@
+*.DS_Store
+platforms/*
+plugins/*
+node_modules/*
+build.json
\ No newline at end of file
diff --git a/app/Readme.md b/app/Readme.md
new file mode 100644
index 0000000..99b3db2
--- /dev/null
+++ b/app/Readme.md
@@ -0,0 +1,30 @@
+# INTVAL3
+
+## Mobile App
+
+The INTVAL3 mobile app is built using the Cordova framework for cross-platform deployment to iOS and Android.
+
+## Requirements
+
+* node.js
+* npm
+* Cordova
+* XCode (for iOS) and/or
+* Android Studio (for Android)
+
+
+## Installation
+
+All of the required plugins can be installed directly by executing the `install.sh` script on a system which supports bash. This script will use the `cordova` application to install the Cordova plugins. Cordova also supports the npm package.json format, so plugins may be alternately installed simply by running a `npm install` command from within the `app` directory.
+
+## Building
+
+Once all dependencies and plugins are installed, you can build the INTVAL3 app by running
+
+```cordova build ios```
+
+or
+
+```cordova build android```
+
+This generates the application source code in the `platforms` directory, under either the `ios` or `android` directory depending on your build target. The app can be built and run on your device by going to the project file and opening it in your IDE, either XCode or Android Studio. Alternately it can be run on your device using the `cordova run ios` or `cordova run android` commands.
\ No newline at end of file
diff --git a/app/config.xml b/app/config.xml
new file mode 100644
index 0000000..4e12245
--- /dev/null
+++ b/app/config.xml
@@ -0,0 +1,48 @@
+
+
+ INTVAL3
+
+ Mobile control app for the INTVAL intervalometer for Bolex 16mm cameras
+
+
+ M McWilliams
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/app/hooks/README.md b/app/hooks/README.md
new file mode 100644
index 0000000..574ad4c
--- /dev/null
+++ b/app/hooks/README.md
@@ -0,0 +1,23 @@
+
+# Cordova Hooks
+
+Cordova Hooks represent special scripts which could be added by application and plugin developers or even by your own build system to customize cordova commands. See Hooks Guide for more details: http://cordova.apache.org/docs/en/edge/guide_appdev_hooks_index.md.html#Hooks%20Guide.
diff --git a/app/hooks/icons.sh b/app/hooks/icons.sh
new file mode 100644
index 0000000..8ff58cb
--- /dev/null
+++ b/app/hooks/icons.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+base=$1
+#convert "$base" -resize '29x29' -unsharp 1x4 "res/icon/ios/Icon-Small.png"
+#convert "$base" -resize '40x40' -unsharp 1x4 "res/icon/ios/Icon-Small-40.png"
+#convert "$base" -resize '50x50' -unsharp 1x4 "res/icon/ios/Icon-Small-50.png"
+#convert "$base" -resize '57x57' -unsharp 1x4 "res/icon/ios/Icon.png"
+#convert "$base" -resize '58x58' -unsharp 1x4 "res/icon/ios/Icon-Small@2x.png"
+convert "$base" -resize '60x60' -unsharp 1x4 "res/icon/ios/icon-60.png"
+#convert "$base" -resize '72x72' -unsharp 1x4 "res/icon/ios/Icon-72.png"
+#convert "$base" -resize '76x76' -unsharp 1x4 "res/icon/ios/Icon-76.png"
+#convert "$base" -resize '80x80' -unsharp 1x4 "res/icon/ios/Icon-Small-40@2x.png"
+#convert "$base" -resize '100x100' -unsharp 1x4 "res/icon/ios/Icon-Small-50@2x.png"
+#convert "$base" -resize '114x114' -unsharp 1x4 "res/icon/ios/Icon@2x.png"
+convert "$base" -resize '120x120' -unsharp 1x4 "res/icon/ios/icon-60@2x.png"
+#convert "$base" -resize '144x144' -unsharp 1x4 "res/icon/ios/Icon-72@2x.png"
+#convert "$base" -resize '152x152' -unsharp 1x4 "res/icon/ios/Icon-76@2x.png"
+convert "$base" -resize '180x180' -unsharp 1x4 "res/icon/ios/icon-60@3x.png"
+#convert "$base" -resize '512x512' -unsharp 1x4 "res/icon/ios/iTunesArtwork"
+#convert "$base" -resize '1024x1024' -unsharp 1x4 "res/icon/ios/iTunesArtwork@2x"
+
+#convert "$base" -resize '36x36' -unsharp 1x4 "res/icon/android/Icon-ldpi.png"
+convert "$base" -resize '48x48' -unsharp 1x4 "res/icon/android/mdpi.png"
+convert "$base" -resize '72x72' -unsharp 1x4 "res/icon/android/hdpi.png"
+convert "$base" -resize '96x96' -unsharp 1x4 "res/icon/android/xhdpi.png"
+convert "$base" -resize '144x144' -unsharp 1x4 "res/icon/android/xxhdpi.png"
+convert "$base" -resize '192x192' -unsharp 1x4 "res/icon/android/xxxhdpi.png"
+
+cd res/icon/ios/
+find -type f -name "*.png" -exec optipng -o7 {} \;
+cd ../android/
+find -type f -name "*.png" -exec optipng -o7 {} \;
\ No newline at end of file
diff --git a/app/hooks/screen.sh b/app/hooks/screen.sh
new file mode 100644
index 0000000..ed733b5
--- /dev/null
+++ b/app/hooks/screen.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+base=$1
+
+c="convert $1 -gravity center"
+
+# iPhone
+$c -resize 320x480 "res/screen/ios/Default~iphone.png"
+$c -resize 640x960 "res/screen/ios/Default@2x~iphone.png"
+$c -resize 640x1136 "res/screen/ios/Default-568h@2x~iphone.png"
+
+$c -resize 320x426 "res/screen/android/splash-portrait-ldpi.png"
+$c -resize 320x470 "res/screen/android/splash-portrait-mdpi.png"
+$c -resize 480x640 "res/screen/android/splash-portrait-hdpi.png"
+$c -resize 720x960 "res/screen/android/splash-portrait-xhdpi.png"
\ No newline at end of file
diff --git a/app/install.sh b/app/install.sh
new file mode 100644
index 0000000..20f0932
--- /dev/null
+++ b/app/install.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+npm install
+cordova platform add ios
+cordova platform add android
+cordova plugin add cordova-plugin-device
+cordova plugin add cordova-plugin-dialogs
+cordova plugin add cordova-plugin-ble-central --variable BLUETOOTH_USAGE_DESCRIPTION="INTVAL3 intervalometer controls"
+cordova plugin add cordova-plugin-statusbar
+cordova plugin add cordova-plugin-camera-with-exif
\ No newline at end of file
diff --git a/app/package-lock.json b/app/package-lock.json
new file mode 100644
index 0000000..91ce2c0
--- /dev/null
+++ b/app/package-lock.json
@@ -0,0 +1,570 @@
+{
+ "name": "com.sixteenmillimeter.intval3",
+ "version": "1.0.2",
+ "lockfileVersion": 1,
+ "requires": true,
+ "dependencies": {
+ "cordova-android": {
+ "version": "6.4.0",
+ "resolved": "https://registry.npmjs.org/cordova-android/-/cordova-android-6.4.0.tgz",
+ "integrity": "sha1-VK6NpXKKjX5e/MYXLT3MoXvH/n0=",
+ "requires": {
+ "android-versions": "1.2.1",
+ "cordova-common": "2.1.0",
+ "elementtree": "0.1.6",
+ "nopt": "3.0.6",
+ "properties-parser": "0.2.3",
+ "q": "1.5.0",
+ "shelljs": "0.5.3"
+ },
+ "dependencies": {
+ "abbrev": {
+ "version": "1.1.0",
+ "bundled": true
+ },
+ "android-versions": {
+ "version": "1.2.1",
+ "bundled": true
+ },
+ "ansi": {
+ "version": "0.3.1",
+ "bundled": true
+ },
+ "balanced-match": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "base64-js": {
+ "version": "0.0.8",
+ "bundled": true
+ },
+ "big-integer": {
+ "version": "1.6.25",
+ "bundled": true
+ },
+ "bplist-parser": {
+ "version": "0.1.1",
+ "bundled": true,
+ "requires": {
+ "big-integer": "1.6.25"
+ }
+ },
+ "brace-expansion": {
+ "version": "1.1.8",
+ "bundled": true,
+ "requires": {
+ "balanced-match": "1.0.0",
+ "concat-map": "0.0.1"
+ }
+ },
+ "concat-map": {
+ "version": "0.0.1",
+ "bundled": true
+ },
+ "cordova-common": {
+ "version": "2.1.0",
+ "bundled": true,
+ "requires": {
+ "ansi": "0.3.1",
+ "bplist-parser": "0.1.1",
+ "cordova-registry-mapper": "1.1.15",
+ "elementtree": "0.1.6",
+ "glob": "5.0.15",
+ "minimatch": "3.0.4",
+ "osenv": "0.1.4",
+ "plist": "1.2.0",
+ "q": "1.5.0",
+ "semver": "5.4.1",
+ "shelljs": "0.5.3",
+ "underscore": "1.8.3",
+ "unorm": "1.4.1"
+ }
+ },
+ "cordova-registry-mapper": {
+ "version": "1.1.15",
+ "bundled": true
+ },
+ "elementtree": {
+ "version": "0.1.6",
+ "bundled": true,
+ "requires": {
+ "sax": "0.3.5"
+ }
+ },
+ "glob": {
+ "version": "5.0.15",
+ "bundled": true,
+ "requires": {
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
+ },
+ "inflight": {
+ "version": "1.0.6",
+ "bundled": true,
+ "requires": {
+ "once": "1.4.0",
+ "wrappy": "1.0.2"
+ }
+ },
+ "inherits": {
+ "version": "2.0.3",
+ "bundled": true
+ },
+ "lodash": {
+ "version": "3.10.1",
+ "bundled": true
+ },
+ "minimatch": {
+ "version": "3.0.4",
+ "bundled": true,
+ "requires": {
+ "brace-expansion": "1.1.8"
+ }
+ },
+ "nopt": {
+ "version": "3.0.6",
+ "bundled": true,
+ "requires": {
+ "abbrev": "1.1.0"
+ }
+ },
+ "once": {
+ "version": "1.4.0",
+ "bundled": true,
+ "requires": {
+ "wrappy": "1.0.2"
+ }
+ },
+ "os-homedir": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "os-tmpdir": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "osenv": {
+ "version": "0.1.4",
+ "bundled": true,
+ "requires": {
+ "os-homedir": "1.0.2",
+ "os-tmpdir": "1.0.2"
+ }
+ },
+ "path-is-absolute": {
+ "version": "1.0.1",
+ "bundled": true
+ },
+ "plist": {
+ "version": "1.2.0",
+ "bundled": true,
+ "requires": {
+ "base64-js": "0.0.8",
+ "util-deprecate": "1.0.2",
+ "xmlbuilder": "4.0.0",
+ "xmldom": "0.1.27"
+ }
+ },
+ "properties-parser": {
+ "version": "0.2.3",
+ "bundled": true
+ },
+ "q": {
+ "version": "1.5.0",
+ "bundled": true
+ },
+ "sax": {
+ "version": "0.3.5",
+ "bundled": true
+ },
+ "semver": {
+ "version": "5.4.1",
+ "bundled": true
+ },
+ "shelljs": {
+ "version": "0.5.3",
+ "bundled": true
+ },
+ "underscore": {
+ "version": "1.8.3",
+ "bundled": true
+ },
+ "unorm": {
+ "version": "1.4.1",
+ "bundled": true
+ },
+ "util-deprecate": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "wrappy": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "xmlbuilder": {
+ "version": "4.0.0",
+ "bundled": true,
+ "requires": {
+ "lodash": "3.10.1"
+ }
+ },
+ "xmldom": {
+ "version": "0.1.27",
+ "bundled": true
+ }
+ }
+ },
+ "cordova-ios": {
+ "version": "4.5.4",
+ "resolved": "https://registry.npmjs.org/cordova-ios/-/cordova-ios-4.5.4.tgz",
+ "integrity": "sha1-yAZIBYlyloVw3BXalzFP+S0H3+c=",
+ "requires": {
+ "cordova-common": "2.1.0",
+ "ios-sim": "6.1.2",
+ "nopt": "3.0.6",
+ "plist": "1.2.0",
+ "q": "1.5.1",
+ "shelljs": "0.5.3",
+ "xcode": "0.9.3",
+ "xml-escape": "1.1.0"
+ },
+ "dependencies": {
+ "abbrev": {
+ "version": "1.1.1",
+ "bundled": true
+ },
+ "ansi": {
+ "version": "0.3.1",
+ "bundled": true
+ },
+ "balanced-match": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "base64-js": {
+ "version": "0.0.8",
+ "bundled": true
+ },
+ "big-integer": {
+ "version": "1.6.25",
+ "bundled": true
+ },
+ "bplist-creator": {
+ "version": "0.0.7",
+ "bundled": true,
+ "requires": {
+ "stream-buffers": "2.2.0"
+ }
+ },
+ "bplist-parser": {
+ "version": "0.1.1",
+ "bundled": true,
+ "requires": {
+ "big-integer": "1.6.25"
+ }
+ },
+ "brace-expansion": {
+ "version": "1.1.8",
+ "bundled": true,
+ "requires": {
+ "balanced-match": "1.0.0",
+ "concat-map": "0.0.1"
+ }
+ },
+ "concat-map": {
+ "version": "0.0.1",
+ "bundled": true
+ },
+ "cordova-common": {
+ "version": "2.1.0",
+ "bundled": true,
+ "requires": {
+ "ansi": "0.3.1",
+ "bplist-parser": "0.1.1",
+ "cordova-registry-mapper": "1.1.15",
+ "elementtree": "0.1.6",
+ "glob": "5.0.15",
+ "minimatch": "3.0.4",
+ "osenv": "0.1.4",
+ "plist": "1.2.0",
+ "q": "1.5.1",
+ "semver": "5.4.1",
+ "shelljs": "0.5.3",
+ "underscore": "1.8.3",
+ "unorm": "1.4.1"
+ }
+ },
+ "cordova-registry-mapper": {
+ "version": "1.1.15",
+ "bundled": true
+ },
+ "elementtree": {
+ "version": "0.1.6",
+ "bundled": true,
+ "requires": {
+ "sax": "0.3.5"
+ }
+ },
+ "glob": {
+ "version": "5.0.15",
+ "bundled": true,
+ "requires": {
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
+ },
+ "inflight": {
+ "version": "1.0.6",
+ "bundled": true,
+ "requires": {
+ "once": "1.4.0",
+ "wrappy": "1.0.2"
+ }
+ },
+ "inherits": {
+ "version": "2.0.3",
+ "bundled": true
+ },
+ "ios-sim": {
+ "version": "6.1.2",
+ "bundled": true,
+ "requires": {
+ "bplist-parser": "0.0.6",
+ "nopt": "1.0.9",
+ "plist": "1.2.0",
+ "simctl": "1.1.1"
+ },
+ "dependencies": {
+ "bplist-parser": {
+ "version": "0.0.6",
+ "bundled": true
+ },
+ "nopt": {
+ "version": "1.0.9",
+ "bundled": true,
+ "requires": {
+ "abbrev": "1.1.1"
+ }
+ }
+ }
+ },
+ "lodash": {
+ "version": "3.10.1",
+ "bundled": true
+ },
+ "minimatch": {
+ "version": "3.0.4",
+ "bundled": true,
+ "requires": {
+ "brace-expansion": "1.1.8"
+ }
+ },
+ "nopt": {
+ "version": "3.0.6",
+ "bundled": true,
+ "requires": {
+ "abbrev": "1.1.1"
+ }
+ },
+ "once": {
+ "version": "1.4.0",
+ "bundled": true,
+ "requires": {
+ "wrappy": "1.0.2"
+ }
+ },
+ "os-homedir": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "os-tmpdir": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "osenv": {
+ "version": "0.1.4",
+ "bundled": true,
+ "requires": {
+ "os-homedir": "1.0.2",
+ "os-tmpdir": "1.0.2"
+ }
+ },
+ "path-is-absolute": {
+ "version": "1.0.1",
+ "bundled": true
+ },
+ "pegjs": {
+ "version": "0.10.0",
+ "bundled": true
+ },
+ "plist": {
+ "version": "1.2.0",
+ "bundled": true,
+ "requires": {
+ "base64-js": "0.0.8",
+ "util-deprecate": "1.0.2",
+ "xmlbuilder": "4.0.0",
+ "xmldom": "0.1.27"
+ }
+ },
+ "q": {
+ "version": "1.5.1",
+ "bundled": true
+ },
+ "sax": {
+ "version": "0.3.5",
+ "bundled": true
+ },
+ "semver": {
+ "version": "5.4.1",
+ "bundled": true
+ },
+ "shelljs": {
+ "version": "0.5.3",
+ "bundled": true
+ },
+ "simctl": {
+ "version": "1.1.1",
+ "bundled": true,
+ "requires": {
+ "shelljs": "0.2.6",
+ "tail": "0.4.0"
+ },
+ "dependencies": {
+ "shelljs": {
+ "version": "0.2.6",
+ "bundled": true
+ }
+ }
+ },
+ "simple-plist": {
+ "version": "0.2.1",
+ "bundled": true,
+ "requires": {
+ "bplist-creator": "0.0.7",
+ "bplist-parser": "0.1.1",
+ "plist": "2.0.1"
+ },
+ "dependencies": {
+ "base64-js": {
+ "version": "1.1.2",
+ "bundled": true
+ },
+ "plist": {
+ "version": "2.0.1",
+ "bundled": true,
+ "requires": {
+ "base64-js": "1.1.2",
+ "xmlbuilder": "8.2.2",
+ "xmldom": "0.1.27"
+ }
+ },
+ "xmlbuilder": {
+ "version": "8.2.2",
+ "bundled": true
+ }
+ }
+ },
+ "stream-buffers": {
+ "version": "2.2.0",
+ "bundled": true
+ },
+ "tail": {
+ "version": "0.4.0",
+ "bundled": true
+ },
+ "underscore": {
+ "version": "1.8.3",
+ "bundled": true
+ },
+ "unorm": {
+ "version": "1.4.1",
+ "bundled": true
+ },
+ "util-deprecate": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "uuid": {
+ "version": "3.0.1",
+ "bundled": true
+ },
+ "wrappy": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "xcode": {
+ "version": "0.9.3",
+ "bundled": true,
+ "requires": {
+ "pegjs": "0.10.0",
+ "simple-plist": "0.2.1",
+ "uuid": "3.0.1"
+ }
+ },
+ "xml-escape": {
+ "version": "1.1.0",
+ "bundled": true
+ },
+ "xmlbuilder": {
+ "version": "4.0.0",
+ "bundled": true,
+ "requires": {
+ "lodash": "3.10.1"
+ }
+ },
+ "xmldom": {
+ "version": "0.1.27",
+ "bundled": true
+ }
+ }
+ },
+ "cordova-plugin-ble-central": {
+ "version": "1.1.4",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-ble-central/-/cordova-plugin-ble-central-1.1.4.tgz",
+ "integrity": "sha1-rZA2mnla1wChuf3WbhnnzkSnicM="
+ },
+ "cordova-plugin-camera-with-exif": {
+ "version": "1.2.2",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-camera-with-exif/-/cordova-plugin-camera-with-exif-1.2.2.tgz",
+ "integrity": "sha1-/kxfHWgga6QoOqtNM4MrVSwil3A="
+ },
+ "cordova-plugin-compat": {
+ "version": "1.2.0",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-compat/-/cordova-plugin-compat-1.2.0.tgz",
+ "integrity": "sha1-C8ZXVyduvZIMASzpIOJ0F3V2Nz4="
+ },
+ "cordova-plugin-device": {
+ "version": "1.1.7",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-device/-/cordova-plugin-device-1.1.7.tgz",
+ "integrity": "sha1-/JQRG+aTJijGaGiTjd89yCyfv+Y="
+ },
+ "cordova-plugin-dialogs": {
+ "version": "1.3.4",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-dialogs/-/cordova-plugin-dialogs-1.3.4.tgz",
+ "integrity": "sha1-XMlm7nyZsvW1s934SQAmKLDacVc="
+ },
+ "cordova-plugin-splashscreen": {
+ "version": "4.1.0",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-splashscreen/-/cordova-plugin-splashscreen-4.1.0.tgz",
+ "integrity": "sha1-gQKKt2Q+YVWT0n8q0CRFYR8ZRrY="
+ },
+ "cordova-plugin-statusbar": {
+ "version": "2.4.0",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-statusbar/-/cordova-plugin-statusbar-2.4.0.tgz",
+ "integrity": "sha1-JOspc3ldEPbxrjIC90+Ix9mQzyA="
+ },
+ "cordova-plugin-whitelist": {
+ "version": "1.3.3",
+ "resolved": "https://registry.npmjs.org/cordova-plugin-whitelist/-/cordova-plugin-whitelist-1.3.3.tgz",
+ "integrity": "sha1-tehezbv+Wu3tQKG/TuI3LmfZb7Q="
+ }
+ }
+}
diff --git a/app/package.json b/app/package.json
new file mode 100644
index 0000000..f9242b2
--- /dev/null
+++ b/app/package.json
@@ -0,0 +1,41 @@
+{
+ "name": "com.sixteenmillimeter.intval3",
+ "displayName": "INTVAL3",
+ "version": "1.0.3",
+ "description": "Mobile control app for the INTVAL intervalometer for Bolex 16mm cameras",
+ "main": "index.js",
+ "scripts": {
+ "test": "echo \"Error: no test specified\" && exit 1"
+ },
+ "author": "M McWilliams",
+ "license": "MIT",
+ "dependencies": {
+ "cordova-android": "^6.4.0",
+ "cordova-ios": "^4.5.4",
+ "cordova-plugin-ble-central": "^1.1.4",
+ "cordova-plugin-camera-with-exif": "^1.2.2",
+ "cordova-plugin-compat": "^1.2.0",
+ "cordova-plugin-device": "^1.1.7",
+ "cordova-plugin-dialogs": "^1.3.4",
+ "cordova-plugin-splashscreen": "^4.1.0",
+ "cordova-plugin-statusbar": "^2.4.0",
+ "cordova-plugin-whitelist": "^1.3.3"
+ },
+ "cordova": {
+ "plugins": {
+ "cordova-plugin-whitelist": {},
+ "cordova-plugin-device": {},
+ "cordova-plugin-dialogs": {},
+ "cordova-plugin-statusbar": {},
+ "cordova-plugin-ble-central": {
+ "BLUETOOTH_USAGE_DESCRIPTION": "INTVAL intervalometer controls"
+ },
+ "cordova-plugin-splashscreen": {},
+ "cordova-plugin-camera-with-exif": {}
+ },
+ "platforms": [
+ "android",
+ "ios"
+ ]
+ }
+}
\ No newline at end of file
diff --git a/app/res/README.md b/app/res/README.md
new file mode 100644
index 0000000..bffb33b
--- /dev/null
+++ b/app/res/README.md
@@ -0,0 +1,29 @@
+
+
+Note that these image resources are not copied into a project when a project
+is created with the CLI. Although there are default image resources in a
+newly-created project, those come from the platform-specific project template,
+which can generally be found in the platform's `template` directory. Until
+icon and splashscreen support is added to the CLI, these image resources
+aren't used directly.
+
+See https://issues.apache.org/jira/browse/CB-5145
diff --git a/app/res/icon/android/hdpi.png b/app/res/icon/android/hdpi.png
new file mode 100644
index 0000000..c213201
Binary files /dev/null and b/app/res/icon/android/hdpi.png differ
diff --git a/app/res/icon/android/mdpi.png b/app/res/icon/android/mdpi.png
new file mode 100644
index 0000000..c4e10a4
Binary files /dev/null and b/app/res/icon/android/mdpi.png differ
diff --git a/app/res/icon/android/xhdpi.png b/app/res/icon/android/xhdpi.png
new file mode 100644
index 0000000..9e35d81
Binary files /dev/null and b/app/res/icon/android/xhdpi.png differ
diff --git a/app/res/icon/android/xxhdpi.png b/app/res/icon/android/xxhdpi.png
new file mode 100644
index 0000000..3056d95
Binary files /dev/null and b/app/res/icon/android/xxhdpi.png differ
diff --git a/app/res/icon/android/xxxhdpi.png b/app/res/icon/android/xxxhdpi.png
new file mode 100644
index 0000000..1872942
Binary files /dev/null and b/app/res/icon/android/xxxhdpi.png differ
diff --git a/app/res/icon/ios/.gitignore b/app/res/icon/ios/.gitignore
new file mode 100644
index 0000000..9931186
--- /dev/null
+++ b/app/res/icon/ios/.gitignore
@@ -0,0 +1,3 @@
+/Icon-60.png
+/Icon-60@2x.png
+/Icon-60@3x.png
diff --git a/app/res/icon/ios/icon-60.png b/app/res/icon/ios/icon-60.png
new file mode 100644
index 0000000..2fd6325
Binary files /dev/null and b/app/res/icon/ios/icon-60.png differ
diff --git a/app/res/icon/ios/icon-60@2x.png b/app/res/icon/ios/icon-60@2x.png
new file mode 100644
index 0000000..d34cd92
Binary files /dev/null and b/app/res/icon/ios/icon-60@2x.png differ
diff --git a/app/res/icon/ios/icon-60@3x.png b/app/res/icon/ios/icon-60@3x.png
new file mode 100644
index 0000000..16204bd
Binary files /dev/null and b/app/res/icon/ios/icon-60@3x.png differ
diff --git a/app/res/screen/ios/Default@2x~universal~anyany.png b/app/res/screen/ios/Default@2x~universal~anyany.png
new file mode 100644
index 0000000..259a4f0
Binary files /dev/null and b/app/res/screen/ios/Default@2x~universal~anyany.png differ
diff --git a/app/www/index.html b/app/www/index.html
index 7a642d7..3b00192 100644
--- a/app/www/index.html
+++ b/app/www/index.html
@@ -1,11 +1,181 @@
- intval 3
+ INTVAL3
+
+
+
+
+
-
+
+
+
INTVAL3
+
+
+
Direction
+
BACKWARD
+
FORWARD
+
+
+
+
Exposure 1/5
+
+
+
+
+
Delay
+
+
+
+
+
+
+
+
+
+
+
+
+
BLUETOOTH
+
+
+
+
+
+
WIFI
+
+ Local IP: null
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
CAMERA
+
+
+
+
+
Rex-o-fader
+
+
+
+
+
+
+
PHONE
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
BOLEX
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
\ No newline at end of file
diff --git a/app/www/static/css/codemirror.css b/app/www/static/css/codemirror.css
new file mode 100644
index 0000000..8f4f22f
--- /dev/null
+++ b/app/www/static/css/codemirror.css
@@ -0,0 +1,346 @@
+/* BASICS */
+
+.CodeMirror {
+ /* Set height, width, borders, and global font properties here */
+ font-family: monospace;
+ height: 300px;
+ color: black;
+ direction: ltr;
+}
+
+/* PADDING */
+
+.CodeMirror-lines {
+ padding: 4px 0; /* Vertical padding around content */
+}
+.CodeMirror pre {
+ padding: 0 4px; /* Horizontal padding of content */
+}
+
+.CodeMirror-scrollbar-filler, .CodeMirror-gutter-filler {
+ background-color: white; /* The little square between H and V scrollbars */
+}
+
+/* GUTTER */
+
+.CodeMirror-gutters {
+ border-right: 1px solid #ddd;
+ background-color: #f7f7f7;
+ white-space: nowrap;
+}
+.CodeMirror-linenumbers {}
+.CodeMirror-linenumber {
+ padding: 0 3px 0 5px;
+ min-width: 20px;
+ text-align: right;
+ color: #999;
+ white-space: nowrap;
+}
+
+.CodeMirror-guttermarker { color: black; }
+.CodeMirror-guttermarker-subtle { color: #999; }
+
+/* CURSOR */
+
+.CodeMirror-cursor {
+ border-left: 1px solid black;
+ border-right: none;
+ width: 0;
+}
+/* Shown when moving in bi-directional text */
+.CodeMirror div.CodeMirror-secondarycursor {
+ border-left: 1px solid silver;
+}
+.cm-fat-cursor .CodeMirror-cursor {
+ width: auto;
+ border: 0 !important;
+ background: #7e7;
+}
+.cm-fat-cursor div.CodeMirror-cursors {
+ z-index: 1;
+}
+.cm-fat-cursor-mark {
+ background-color: rgba(20, 255, 20, 0.5);
+ -webkit-animation: blink 1.06s steps(1) infinite;
+ -moz-animation: blink 1.06s steps(1) infinite;
+ animation: blink 1.06s steps(1) infinite;
+}
+.cm-animate-fat-cursor {
+ width: auto;
+ border: 0;
+ -webkit-animation: blink 1.06s steps(1) infinite;
+ -moz-animation: blink 1.06s steps(1) infinite;
+ animation: blink 1.06s steps(1) infinite;
+ background-color: #7e7;
+}
+@-moz-keyframes blink {
+ 0% {}
+ 50% { background-color: transparent; }
+ 100% {}
+}
+@-webkit-keyframes blink {
+ 0% {}
+ 50% { background-color: transparent; }
+ 100% {}
+}
+@keyframes blink {
+ 0% {}
+ 50% { background-color: transparent; }
+ 100% {}
+}
+
+/* Can style cursor different in overwrite (non-insert) mode */
+.CodeMirror-overwrite .CodeMirror-cursor {}
+
+.cm-tab { display: inline-block; text-decoration: inherit; }
+
+.CodeMirror-rulers {
+ position: absolute;
+ left: 0; right: 0; top: -50px; bottom: -20px;
+ overflow: hidden;
+}
+.CodeMirror-ruler {
+ border-left: 1px solid #ccc;
+ top: 0; bottom: 0;
+ position: absolute;
+}
+
+/* DEFAULT THEME */
+
+.cm-s-default .cm-header {color: blue;}
+.cm-s-default .cm-quote {color: #090;}
+.cm-negative {color: #d44;}
+.cm-positive {color: #292;}
+.cm-header, .cm-strong {font-weight: bold;}
+.cm-em {font-style: italic;}
+.cm-link {text-decoration: underline;}
+.cm-strikethrough {text-decoration: line-through;}
+
+.cm-s-default .cm-keyword {color: #708;}
+.cm-s-default .cm-atom {color: #219;}
+.cm-s-default .cm-number {color: #164;}
+.cm-s-default .cm-def {color: #00f;}
+.cm-s-default .cm-variable,
+.cm-s-default .cm-punctuation,
+.cm-s-default .cm-property,
+.cm-s-default .cm-operator {}
+.cm-s-default .cm-variable-2 {color: #05a;}
+.cm-s-default .cm-variable-3, .cm-s-default .cm-type {color: #085;}
+.cm-s-default .cm-comment {color: #a50;}
+.cm-s-default .cm-string {color: #a11;}
+.cm-s-default .cm-string-2 {color: #f50;}
+.cm-s-default .cm-meta {color: #555;}
+.cm-s-default .cm-qualifier {color: #555;}
+.cm-s-default .cm-builtin {color: #30a;}
+.cm-s-default .cm-bracket {color: #997;}
+.cm-s-default .cm-tag {color: #170;}
+.cm-s-default .cm-attribute {color: #00c;}
+.cm-s-default .cm-hr {color: #999;}
+.cm-s-default .cm-link {color: #00c;}
+
+.cm-s-default .cm-error {color: #f00;}
+.cm-invalidchar {color: #f00;}
+
+.CodeMirror-composing { border-bottom: 2px solid; }
+
+/* Default styles for common addons */
+
+div.CodeMirror span.CodeMirror-matchingbracket {color: #0b0;}
+div.CodeMirror span.CodeMirror-nonmatchingbracket {color: #a22;}
+.CodeMirror-matchingtag { background: rgba(255, 150, 0, .3); }
+.CodeMirror-activeline-background {background: #e8f2ff;}
+
+/* STOP */
+
+/* The rest of this file contains styles related to the mechanics of
+ the editor. You probably shouldn't touch them. */
+
+.CodeMirror {
+ position: relative;
+ overflow: hidden;
+ background: white;
+}
+
+.CodeMirror-scroll {
+ overflow: scroll !important; /* Things will break if this is overridden */
+ /* 30px is the magic margin used to hide the element's real scrollbars */
+ /* See overflow: hidden in .CodeMirror */
+ margin-bottom: -30px; margin-right: -30px;
+ padding-bottom: 30px;
+ height: 100%;
+ outline: none; /* Prevent dragging from highlighting the element */
+ position: relative;
+}
+.CodeMirror-sizer {
+ position: relative;
+ border-right: 30px solid transparent;
+}
+
+/* The fake, visible scrollbars. Used to force redraw during scrolling
+ before actual scrolling happens, thus preventing shaking and
+ flickering artifacts. */
+.CodeMirror-vscrollbar, .CodeMirror-hscrollbar, .CodeMirror-scrollbar-filler, .CodeMirror-gutter-filler {
+ position: absolute;
+ z-index: 6;
+ display: none;
+}
+.CodeMirror-vscrollbar {
+ right: 0; top: 0;
+ overflow-x: hidden;
+ overflow-y: scroll;
+}
+.CodeMirror-hscrollbar {
+ bottom: 0; left: 0;
+ overflow-y: hidden;
+ overflow-x: scroll;
+}
+.CodeMirror-scrollbar-filler {
+ right: 0; bottom: 0;
+}
+.CodeMirror-gutter-filler {
+ left: 0; bottom: 0;
+}
+
+.CodeMirror-gutters {
+ position: absolute; left: 0; top: 0;
+ min-height: 100%;
+ z-index: 3;
+}
+.CodeMirror-gutter {
+ white-space: normal;
+ height: 100%;
+ display: inline-block;
+ vertical-align: top;
+ margin-bottom: -30px;
+}
+.CodeMirror-gutter-wrapper {
+ position: absolute;
+ z-index: 4;
+ background: none !important;
+ border: none !important;
+}
+.CodeMirror-gutter-background {
+ position: absolute;
+ top: 0; bottom: 0;
+ z-index: 4;
+}
+.CodeMirror-gutter-elt {
+ position: absolute;
+ cursor: default;
+ z-index: 4;
+}
+.CodeMirror-gutter-wrapper ::selection { background-color: transparent }
+.CodeMirror-gutter-wrapper ::-moz-selection { background-color: transparent }
+
+.CodeMirror-lines {
+ cursor: text;
+ min-height: 1px; /* prevents collapsing before first draw */
+}
+.CodeMirror pre {
+ /* Reset some styles that the rest of the page might have set */
+ -moz-border-radius: 0; -webkit-border-radius: 0; border-radius: 0;
+ border-width: 0;
+ background: transparent;
+ font-family: inherit;
+ font-size: inherit;
+ margin: 0;
+ white-space: pre;
+ word-wrap: normal;
+ line-height: inherit;
+ color: inherit;
+ z-index: 2;
+ position: relative;
+ overflow: visible;
+ -webkit-tap-highlight-color: transparent;
+ -webkit-font-variant-ligatures: contextual;
+ font-variant-ligatures: contextual;
+}
+.CodeMirror-wrap pre {
+ word-wrap: break-word;
+ white-space: pre-wrap;
+ word-break: normal;
+}
+
+.CodeMirror-linebackground {
+ position: absolute;
+ left: 0; right: 0; top: 0; bottom: 0;
+ z-index: 0;
+}
+
+.CodeMirror-linewidget {
+ position: relative;
+ z-index: 2;
+ overflow: auto;
+}
+
+.CodeMirror-widget {}
+
+.CodeMirror-rtl pre { direction: rtl; }
+
+.CodeMirror-code {
+ outline: none;
+}
+
+/* Force content-box sizing for the elements where we expect it */
+.CodeMirror-scroll,
+.CodeMirror-sizer,
+.CodeMirror-gutter,
+.CodeMirror-gutters,
+.CodeMirror-linenumber {
+ -moz-box-sizing: content-box;
+ box-sizing: content-box;
+}
+
+.CodeMirror-measure {
+ position: absolute;
+ width: 100%;
+ height: 0;
+ overflow: hidden;
+ visibility: hidden;
+}
+
+.CodeMirror-cursor {
+ position: absolute;
+ pointer-events: none;
+}
+.CodeMirror-measure pre { position: static; }
+
+div.CodeMirror-cursors {
+ visibility: hidden;
+ position: relative;
+ z-index: 3;
+}
+div.CodeMirror-dragcursors {
+ visibility: visible;
+}
+
+.CodeMirror-focused div.CodeMirror-cursors {
+ visibility: visible;
+}
+
+.CodeMirror-selected { background: #d9d9d9; }
+.CodeMirror-focused .CodeMirror-selected { background: #d7d4f0; }
+.CodeMirror-crosshair { cursor: crosshair; }
+.CodeMirror-line::selection, .CodeMirror-line > span::selection, .CodeMirror-line > span > span::selection { background: #d7d4f0; }
+.CodeMirror-line::-moz-selection, .CodeMirror-line > span::-moz-selection, .CodeMirror-line > span > span::-moz-selection { background: #d7d4f0; }
+
+.cm-searching {
+ background-color: #ffa;
+ background-color: rgba(255, 255, 0, .4);
+}
+
+/* Used to force a border model for a node */
+.cm-force-border { padding-right: .1px; }
+
+@media print {
+ /* Hide the cursor when printing */
+ .CodeMirror div.CodeMirror-cursors {
+ visibility: hidden;
+ }
+}
+
+/* See issue #2901 */
+.cm-tab-wrap-hack:after { content: ''; }
+
+/* Help users use markselection to safely style text background */
+span.CodeMirror-selectedtext { background: none; }
diff --git a/app/www/static/css/index.css b/app/www/static/css/index.css
new file mode 100644
index 0000000..9749ec1
--- /dev/null
+++ b/app/www/static/css/index.css
@@ -0,0 +1,430 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+* {
+ -webkit-tap-highlight-color: rgba(0,0,0,0); /* make transparent link selection, adjust last value opacity 0 to 1.0 */
+}
+
+body {
+ -webkit-touch-callout: none; /* prevent callout to copy image, etc when tap to hold */
+ -webkit-text-size-adjust: none; /* prevent webkit from resizing text to fit */
+ -webkit-user-select: none; /* prevent copy paste, to allow, change 'none' to 'text' */
+}
+html,body{
+ background: #212121;
+ height: 100%;
+ padding: 0;
+ margin: 0;
+}
+html,body,button,h2,label,input{
+ color: #fff;
+ font-family: 'Arial Neue', Helvetical, Arial, sans-serif;
+
+}
+
+.clearfix::after {
+ content: "";
+ clear: both;
+ display: table;
+}
+
+body.mobile{
+ padding-top: 5px;
+}
+.page{
+ padding: 5px 10% 0 10%;
+ display: none;
+}
+.page.selected{
+ display: block;
+}
+.ble{
+ display: none;
+}
+.ble.active{
+ display: block;
+}
+h2{
+ font-size: 18px;
+ text-align: center;
+ font-weight: normal;
+}
+/* The switch - the box around the slider */
+.switch {
+ position: relative;
+ display: block;
+ width: 60px;
+ height: 34px;
+ margin: 0 auto;
+}
+
+/* Hide default HTML checkbox */
+.switch input {display:none;}
+
+/* The slider */
+.slider {
+ position: absolute;
+ cursor: pointer;
+ top: 0;
+ left: 0;
+ right: 0;
+ bottom: 0;
+ background-color: #20ce45;
+ -webkit-transition: .4s;
+ transition: .4s;
+}
+
+.slider:before {
+ position: absolute;
+ content: "";
+ height: 26px;
+ width: 26px;
+ left: 4px;
+ bottom: 4px;
+ background-color: white;
+ -webkit-transition: .4s;
+ transition: .4s;
+}
+
+input:checked + .slider {
+ background-color: #f32121;
+}
+
+input:focus + .slider {
+
+}
+
+input:checked + .slider:before {
+ -webkit-transform: translateX(26px);
+ -ms-transform: translateX(26px);
+ transform: translateX(26px);
+}
+
+/* Rounded sliders */
+.slider.round {
+ border-radius: 34px;
+}
+
+.slider.round:before {
+ border-radius: 50%;
+}
+input[type=number],
+input[type=text],
+input[type=password],
+select{
+ width: 100%;
+ border: 1px solid #fff;
+ border-radius: 5px;
+ color: #fff;
+ font-size: 18px;
+ -webkit-appearance: none;
+ background: transparent;
+ box-shadow: none;
+ outline: none;
+ margin: 5px 0;
+ padding: 5px 10px;
+ box-sizing: border-box;
+}
+option{
+ color: #212121;
+}
+button{
+ width: 100%;
+ border: 1px solid #fff;
+ border-radius: 5px;
+ color: #fff;
+ font-size: 18px;
+ background: #363636;
+ -webkit-appearance: none;
+ box-shadow: none;
+ outline: none;
+ margin: 5px 0;
+ padding: 5px 0;
+ text-align: center;
+}
+button:focus,
+button.focus{
+ background-color: #20ce45;
+ border-color: #20ce45;
+ color: #212121;
+ font-weight: bold;
+}
+
+#fwdLabel,#bwdLabel{
+ margin-top: 8px;
+ color: #666;
+}
+#fwdLabel.selected,
+#bwdLabel.selected{
+ color: #fff;
+}
+#fwdLabel.selected{
+ text-shadow: 0px 0px 4px #20ce45;
+}
+#bwdLabel.selected{
+ text-shadow: 0px 0px 4px #f32121;
+}
+#fwdLabel{
+ float: left;
+}
+#bwdLabel{
+ position: absolute;
+ right: 10%;
+}
+.label{
+ /*text-align: center;*/
+ color: #666;
+ margin-top: 6px;
+ margin-bottom: 9px;
+}
+
+/* MAIN */
+#app{
+
+}
+
+#app > h2{
+ font-weight: bold;
+}
+
+#exposure,
+#delay{
+ width: 70%;
+ display: inline-block;
+}
+#scale,
+#delayScale{
+ width: 25%;
+ display: inline-block;
+ float: right;
+}
+#str{
+ color: #fff;
+}
+#counter{
+ text-align: center;
+}
+
+#frame{
+ padding: 20px 0;
+ font-size: 24px;
+}
+
+#settingsIcon > div{
+ background: url(data:image/svg+xml;utf8;base64,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) no-repeat;
+}
+#mscriptIcon > div{
+ background: url(data:image/svg+xml;utf8;base64,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) no-repeat;
+}
+#appIcon > div{
+ background: url(data:image/svg+xml;utf8;base64,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) no-repeat;
+}
+.cameraIcon{
+ background: url(data:image/svg+xml;utf8;base64,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) no-repeat;
+}
+
+button i {
+ display: block;
+ width: 33px;
+ height: 33px;
+ margin: 10px auto;
+}
+
+footer{
+ display: block;
+ width: 100%;
+ height: 50px;
+ position: fixed;
+ bottom: 0;
+ border-top: 1px solid rgba(255, 255, 255, 0.3);
+}
+
+footer .icon {
+ width: 33.33%;
+ /*width: 50%;*/
+ height: 50px;
+ float: left;
+ box-sizing: border-box;
+ border-right: 1px solid rgba(255, 255, 255, 0.3);
+}
+
+body.mobile footer .icon{
+ /*width: 25%;*/
+ width: 33.33%;
+}
+
+footer .icon:last-child{
+ border-right: 0;
+}
+
+.icon > div{
+ display: block;
+ line-height: 34px;
+ height: 33px;
+ width: 33px;
+ opacity: 0.5;
+ color: #fff;
+ margin: 10px auto 0;
+}
+.icon.selected > div{
+ opacity: 1.0;
+}
+
+footer > div.selected{
+ background: rgba(255, 255, 255, 0.1);
+}
+
+.CodeMirror{
+ font-size: 18px;
+}
+
+#compile{
+ margin-top: 20px;
+}
+
+#seq{
+ margin-top: 40px;
+ padding: 10px 0;
+}
+
+#overlay{
+ position: fixed;
+ z-index: 2001;
+ top: 0;
+ left: 0;
+ bottom: 0;
+ right: 0;
+ width: 100%;
+ height: 100%;
+ background: rgba(0, 0, 0, 0.5);
+ display: none;
+}
+#overlay.active{
+ display: block;
+}
+#spinner{
+ display: none;
+ margin-top: 200px;
+}
+
+#spinner.active{
+ display: block;
+}
+
+#disconnect,#scan{
+ display: none;
+}
+#disconnect.active,
+#scan.active{
+ display: block;
+}
+
+#available.active{
+ border-color: #20ce45;
+}
+#ip{
+ color: #666;
+}
+#ip span{
+ color: #20ce45;
+}
+#password,#wifi,#ip{
+ display: none;
+}
+#password.active,
+#ip.active,
+#wifi.active{
+ display: block;
+}
+.indicator {
+ color: red;
+ width: 0;
+ height: 0;
+ border-left: 5px solid transparent;
+ border-right: 5px solid transparent;
+
+ border-bottom: 5px solid black;
+}
+.setting{
+ width: 50%;
+ float: left;
+}
+.setting input,
+.setting select{
+ width: 90%;
+}
+.setting .label{
+ margin-bottom: 3px;
+}
+#cameraBtn{
+ margin-top: 20px;
+}
+#camera_exposure,
+#bolex_exposure{
+ width: 50%;
+ float: left;
+}
+#camera_exposure input,
+#bolex_exposure input{
+ margin: 12px auto;
+ width: 69%;
+ display: block;
+ border-color: #666;
+}
+#camera_exposure h3,
+#bolex_exposure h3{
+ text-align: center;
+ font-weight: normal;
+}
+#camera_exposure div label,
+#bolex_exposure div label{
+ color: #666;
+ position: absolute;
+ margin-top: 8px;
+ text-align: center;
+ width: 100%;
+ margin-left: -50%;
+}
+span.neg{
+ color: #f32121;;
+}
+span.pos{
+ color: #20ce45;
+}
+body.mobile footer{
+ display: block;
+}
+
+#reset{
+ margin-top: 60px;
+}
+#msg{
+ display: none;
+ width: 200px;
+ height: 44px;
+ position: fixed;
+ left: 50%;
+ margin-left: -100px;
+ margin-top: 45px;
+ color: #fff;
+ text-align: center;
+ text-shadow: 1px 1px 0px #000;
+}
+#msg.active{
+ display: block;
+}
\ No newline at end of file
diff --git a/app/www/static/css/monokai.css b/app/www/static/css/monokai.css
new file mode 100644
index 0000000..b5edd13
--- /dev/null
+++ b/app/www/static/css/monokai.css
@@ -0,0 +1,36 @@
+/* Based on Sublime Text's Monokai theme */
+
+.cm-s-monokai.CodeMirror { background: #272822; color: #f8f8f2; }
+.cm-s-monokai div.CodeMirror-selected { background: #49483E; }
+.cm-s-monokai .CodeMirror-line::selection, .cm-s-monokai .CodeMirror-line > span::selection, .cm-s-monokai .CodeMirror-line > span > span::selection { background: rgba(73, 72, 62, .99); }
+.cm-s-monokai .CodeMirror-line::-moz-selection, .cm-s-monokai .CodeMirror-line > span::-moz-selection, .cm-s-monokai .CodeMirror-line > span > span::-moz-selection { background: rgba(73, 72, 62, .99); }
+.cm-s-monokai .CodeMirror-gutters { background: #272822; border-right: 0px; }
+.cm-s-monokai .CodeMirror-guttermarker { color: white; }
+.cm-s-monokai .CodeMirror-guttermarker-subtle { color: #d0d0d0; }
+.cm-s-monokai .CodeMirror-linenumber { color: #d0d0d0; }
+.cm-s-monokai .CodeMirror-cursor { border-left: 1px solid #f8f8f0; }
+
+.cm-s-monokai span.cm-comment { color: #75715e; }
+.cm-s-monokai span.cm-atom { color: #ae81ff; }
+.cm-s-monokai span.cm-number { color: #ae81ff; }
+
+.cm-s-monokai span.cm-property, .cm-s-monokai span.cm-attribute { color: #a6e22e; }
+.cm-s-monokai span.cm-keyword { color: #f92672; }
+.cm-s-monokai span.cm-builtin { color: #66d9ef; }
+.cm-s-monokai span.cm-string { color: #e6db74; }
+
+.cm-s-monokai span.cm-variable { color: #f8f8f2; }
+.cm-s-monokai span.cm-variable-2 { color: #9effff; }
+.cm-s-monokai span.cm-variable-3, .cm-s-monokai span.cm-type { color: #66d9ef; }
+.cm-s-monokai span.cm-def { color: #fd971f; }
+.cm-s-monokai span.cm-bracket { color: #f8f8f2; }
+.cm-s-monokai span.cm-tag { color: #f92672; }
+.cm-s-monokai span.cm-header { color: #ae81ff; }
+.cm-s-monokai span.cm-link { color: #ae81ff; }
+.cm-s-monokai span.cm-error { background: #f92672; color: #f8f8f0; }
+
+.cm-s-monokai .CodeMirror-activeline-background { background: #373831; }
+.cm-s-monokai .CodeMirror-matchingbracket {
+ text-decoration: underline;
+ color: white !important;
+}
diff --git a/app/www/static/css/qunit-2.5.0.css b/app/www/static/css/qunit-2.5.0.css
new file mode 100644
index 0000000..21ac68b
--- /dev/null
+++ b/app/www/static/css/qunit-2.5.0.css
@@ -0,0 +1,436 @@
+/*!
+ * QUnit 2.5.0
+ * https://qunitjs.com/
+ *
+ * Copyright jQuery Foundation and other contributors
+ * Released under the MIT license
+ * https://jquery.org/license
+ *
+ * Date: 2018-01-10T02:56Z
+ */
+
+/** Font Family and Sizes */
+
+#qunit-tests, #qunit-header, #qunit-banner, #qunit-testrunner-toolbar, #qunit-filteredTest, #qunit-userAgent, #qunit-testresult {
+ font-family: "Helvetica Neue Light", "HelveticaNeue-Light", "Helvetica Neue", Calibri, Helvetica, Arial, sans-serif;
+}
+
+#qunit-testrunner-toolbar, #qunit-filteredTest, #qunit-userAgent, #qunit-testresult, #qunit-tests li { font-size: small; }
+#qunit-tests { font-size: smaller; }
+
+
+/** Resets */
+
+#qunit-tests, #qunit-header, #qunit-banner, #qunit-filteredTest, #qunit-userAgent, #qunit-testresult, #qunit-modulefilter {
+ margin: 0;
+ padding: 0;
+}
+
+
+/** Header (excluding toolbar) */
+
+#qunit-header {
+ padding: 0.5em 0 0.5em 1em;
+
+ color: #8699A4;
+ background-color: #0D3349;
+
+ font-size: 1.5em;
+ line-height: 1em;
+ font-weight: 400;
+
+ border-radius: 5px 5px 0 0;
+}
+
+#qunit-header a {
+ text-decoration: none;
+ color: #C2CCD1;
+}
+
+#qunit-header a:hover,
+#qunit-header a:focus {
+ color: #FFF;
+}
+
+#qunit-banner {
+ height: 5px;
+}
+
+#qunit-filteredTest {
+ padding: 0.5em 1em 0.5em 1em;
+ color: #366097;
+ background-color: #F4FF77;
+}
+
+#qunit-userAgent {
+ padding: 0.5em 1em 0.5em 1em;
+ color: #FFF;
+ background-color: #2B81AF;
+ text-shadow: rgba(0, 0, 0, 0.5) 2px 2px 1px;
+}
+
+
+/** Toolbar */
+
+#qunit-testrunner-toolbar {
+ padding: 0.5em 1em 0.5em 1em;
+ color: #5E740B;
+ background-color: #EEE;
+}
+
+#qunit-testrunner-toolbar .clearfix {
+ height: 0;
+ clear: both;
+}
+
+#qunit-testrunner-toolbar label {
+ display: inline-block;
+}
+
+#qunit-testrunner-toolbar input[type=checkbox],
+#qunit-testrunner-toolbar input[type=radio] {
+ margin: 3px;
+ vertical-align: -2px;
+}
+
+#qunit-testrunner-toolbar input[type=text] {
+ box-sizing: border-box;
+ height: 1.6em;
+}
+
+.qunit-url-config,
+.qunit-filter,
+#qunit-modulefilter {
+ display: inline-block;
+ line-height: 2.1em;
+}
+
+.qunit-filter,
+#qunit-modulefilter {
+ float: right;
+ position: relative;
+ margin-left: 1em;
+}
+
+.qunit-url-config label {
+ margin-right: 0.5em;
+}
+
+#qunit-modulefilter-search {
+ box-sizing: border-box;
+ width: 400px;
+}
+
+#qunit-modulefilter-search-container:after {
+ position: absolute;
+ right: 0.3em;
+ content: "\25bc";
+ color: black;
+}
+
+#qunit-modulefilter-dropdown {
+ /* align with #qunit-modulefilter-search */
+ box-sizing: border-box;
+ width: 400px;
+ position: absolute;
+ right: 0;
+ top: 50%;
+ margin-top: 0.8em;
+
+ border: 1px solid #D3D3D3;
+ border-top: none;
+ border-radius: 0 0 .25em .25em;
+ color: #000;
+ background-color: #F5F5F5;
+ z-index: 99;
+}
+
+#qunit-modulefilter-dropdown a {
+ color: inherit;
+ text-decoration: none;
+}
+
+#qunit-modulefilter-dropdown .clickable.checked {
+ font-weight: bold;
+ color: #000;
+ background-color: #D2E0E6;
+}
+
+#qunit-modulefilter-dropdown .clickable:hover {
+ color: #FFF;
+ background-color: #0D3349;
+}
+
+#qunit-modulefilter-actions {
+ display: block;
+ overflow: auto;
+
+ /* align with #qunit-modulefilter-dropdown-list */
+ font: smaller/1.5em sans-serif;
+}
+
+#qunit-modulefilter-dropdown #qunit-modulefilter-actions > * {
+ box-sizing: border-box;
+ max-height: 2.8em;
+ display: block;
+ padding: 0.4em;
+}
+
+#qunit-modulefilter-dropdown #qunit-modulefilter-actions > button {
+ float: right;
+ font: inherit;
+}
+
+#qunit-modulefilter-dropdown #qunit-modulefilter-actions > :last-child {
+ /* insert padding to align with checkbox margins */
+ padding-left: 3px;
+}
+
+#qunit-modulefilter-dropdown-list {
+ max-height: 200px;
+ overflow-y: auto;
+ margin: 0;
+ border-top: 2px groove threedhighlight;
+ padding: 0.4em 0 0;
+ font: smaller/1.5em sans-serif;
+}
+
+#qunit-modulefilter-dropdown-list li {
+ white-space: nowrap;
+ overflow: hidden;
+ text-overflow: ellipsis;
+}
+
+#qunit-modulefilter-dropdown-list .clickable {
+ display: block;
+ padding-left: 0.15em;
+}
+
+
+/** Tests: Pass/Fail */
+
+#qunit-tests {
+ list-style-position: inside;
+}
+
+#qunit-tests li {
+ padding: 0.4em 1em 0.4em 1em;
+ border-bottom: 1px solid #FFF;
+ list-style-position: inside;
+}
+
+#qunit-tests > li {
+ display: none;
+}
+
+#qunit-tests li.running,
+#qunit-tests li.pass,
+#qunit-tests li.fail,
+#qunit-tests li.skipped,
+#qunit-tests li.aborted {
+ display: list-item;
+}
+
+#qunit-tests.hidepass {
+ position: relative;
+}
+
+#qunit-tests.hidepass li.running,
+#qunit-tests.hidepass li.pass:not(.todo) {
+ visibility: hidden;
+ position: absolute;
+ width: 0;
+ height: 0;
+ padding: 0;
+ border: 0;
+ margin: 0;
+}
+
+#qunit-tests li strong {
+ cursor: pointer;
+}
+
+#qunit-tests li.skipped strong {
+ cursor: default;
+}
+
+#qunit-tests li a {
+ padding: 0.5em;
+ color: #C2CCD1;
+ text-decoration: none;
+}
+
+#qunit-tests li p a {
+ padding: 0.25em;
+ color: #6B6464;
+}
+#qunit-tests li a:hover,
+#qunit-tests li a:focus {
+ color: #000;
+}
+
+#qunit-tests li .runtime {
+ float: right;
+ font-size: smaller;
+}
+
+.qunit-assert-list {
+ margin-top: 0.5em;
+ padding: 0.5em;
+
+ background-color: #FFF;
+
+ border-radius: 5px;
+}
+
+.qunit-source {
+ margin: 0.6em 0 0.3em;
+}
+
+.qunit-collapsed {
+ display: none;
+}
+
+#qunit-tests table {
+ border-collapse: collapse;
+ margin-top: 0.2em;
+}
+
+#qunit-tests th {
+ text-align: right;
+ vertical-align: top;
+ padding: 0 0.5em 0 0;
+}
+
+#qunit-tests td {
+ vertical-align: top;
+}
+
+#qunit-tests pre {
+ margin: 0;
+ white-space: pre-wrap;
+ word-wrap: break-word;
+}
+
+#qunit-tests del {
+ color: #374E0C;
+ background-color: #E0F2BE;
+ text-decoration: none;
+}
+
+#qunit-tests ins {
+ color: #500;
+ background-color: #FFCACA;
+ text-decoration: none;
+}
+
+/*** Test Counts */
+
+#qunit-tests b.counts { color: #000; }
+#qunit-tests b.passed { color: #5E740B; }
+#qunit-tests b.failed { color: #710909; }
+
+#qunit-tests li li {
+ padding: 5px;
+ background-color: #FFF;
+ border-bottom: none;
+ list-style-position: inside;
+}
+
+/*** Passing Styles */
+
+#qunit-tests li li.pass {
+ color: #3C510C;
+ background-color: #FFF;
+ border-left: 10px solid #C6E746;
+}
+
+#qunit-tests .pass { color: #528CE0; background-color: #D2E0E6; }
+#qunit-tests .pass .test-name { color: #366097; }
+
+#qunit-tests .pass .test-actual,
+#qunit-tests .pass .test-expected { color: #999; }
+
+#qunit-banner.qunit-pass { background-color: #C6E746; }
+
+/*** Failing Styles */
+
+#qunit-tests li li.fail {
+ color: #710909;
+ background-color: #FFF;
+ border-left: 10px solid #EE5757;
+ white-space: pre;
+}
+
+#qunit-tests > li:last-child {
+ border-radius: 0 0 5px 5px;
+}
+
+#qunit-tests .fail { color: #000; background-color: #EE5757; }
+#qunit-tests .fail .test-name,
+#qunit-tests .fail .module-name { color: #000; }
+
+#qunit-tests .fail .test-actual { color: #EE5757; }
+#qunit-tests .fail .test-expected { color: #008000; }
+
+#qunit-banner.qunit-fail { background-color: #EE5757; }
+
+
+/*** Aborted tests */
+#qunit-tests .aborted { color: #000; background-color: orange; }
+/*** Skipped tests */
+
+#qunit-tests .skipped {
+ background-color: #EBECE9;
+}
+
+#qunit-tests .qunit-todo-label,
+#qunit-tests .qunit-skipped-label {
+ background-color: #F4FF77;
+ display: inline-block;
+ font-style: normal;
+ color: #366097;
+ line-height: 1.8em;
+ padding: 0 0.5em;
+ margin: -0.4em 0.4em -0.4em 0;
+}
+
+#qunit-tests .qunit-todo-label {
+ background-color: #EEE;
+}
+
+/** Result */
+
+#qunit-testresult {
+ color: #2B81AF;
+ background-color: #D2E0E6;
+
+ border-bottom: 1px solid #FFF;
+}
+#qunit-testresult .clearfix {
+ height: 0;
+ clear: both;
+}
+#qunit-testresult .module-name {
+ font-weight: 700;
+}
+#qunit-testresult-display {
+ padding: 0.5em 1em 0.5em 1em;
+ width: 85%;
+ float:left;
+}
+#qunit-testresult-controls {
+ padding: 0.5em 1em 0.5em 1em;
+ width: 10%;
+ float:left;
+}
+
+/** Fixture */
+
+#qunit-fixture {
+ position: absolute;
+ top: -10000px;
+ left: -10000px;
+ width: 1000px;
+ height: 1000px;
+}
diff --git a/app/www/static/js/codemirror.js b/app/www/static/js/codemirror.js
new file mode 100644
index 0000000..8a69129
--- /dev/null
+++ b/app/www/static/js/codemirror.js
@@ -0,0 +1,9665 @@
+// CodeMirror, copyright (c) by Marijn Haverbeke and others
+// Distributed under an MIT license: http://codemirror.net/LICENSE
+
+// This is CodeMirror (http://codemirror.net), a code editor
+// implemented in JavaScript on top of the browser's DOM.
+//
+// You can find some technical background for some of the code below
+// at http://marijnhaverbeke.nl/blog/#cm-internals .
+
+(function (global, factory) {
+ typeof exports === 'object' && typeof module !== 'undefined' ? module.exports = factory() :
+ typeof define === 'function' && define.amd ? define(factory) :
+ (global.CodeMirror = factory());
+}(this, (function () { 'use strict';
+
+// Kludges for bugs and behavior differences that can't be feature
+// detected are enabled based on userAgent etc sniffing.
+var userAgent = navigator.userAgent;
+var platform = navigator.platform;
+
+var gecko = /gecko\/\d/i.test(userAgent);
+var ie_upto10 = /MSIE \d/.test(userAgent);
+var ie_11up = /Trident\/(?:[7-9]|\d{2,})\..*rv:(\d+)/.exec(userAgent);
+var edge = /Edge\/(\d+)/.exec(userAgent);
+var ie = ie_upto10 || ie_11up || edge;
+var ie_version = ie && (ie_upto10 ? document.documentMode || 6 : +(edge || ie_11up)[1]);
+var webkit = !edge && /WebKit\//.test(userAgent);
+var qtwebkit = webkit && /Qt\/\d+\.\d+/.test(userAgent);
+var chrome = !edge && /Chrome\//.test(userAgent);
+var presto = /Opera\//.test(userAgent);
+var safari = /Apple Computer/.test(navigator.vendor);
+var mac_geMountainLion = /Mac OS X 1\d\D([8-9]|\d\d)\D/.test(userAgent);
+var phantom = /PhantomJS/.test(userAgent);
+
+var ios = !edge && /AppleWebKit/.test(userAgent) && /Mobile\/\w+/.test(userAgent);
+var android = /Android/.test(userAgent);
+// This is woefully incomplete. Suggestions for alternative methods welcome.
+var mobile = ios || android || /webOS|BlackBerry|Opera Mini|Opera Mobi|IEMobile/i.test(userAgent);
+var mac = ios || /Mac/.test(platform);
+var chromeOS = /\bCrOS\b/.test(userAgent);
+var windows = /win/i.test(platform);
+
+var presto_version = presto && userAgent.match(/Version\/(\d*\.\d*)/);
+if (presto_version) { presto_version = Number(presto_version[1]); }
+if (presto_version && presto_version >= 15) { presto = false; webkit = true; }
+// Some browsers use the wrong event properties to signal cmd/ctrl on OS X
+var flipCtrlCmd = mac && (qtwebkit || presto && (presto_version == null || presto_version < 12.11));
+var captureRightClick = gecko || (ie && ie_version >= 9);
+
+function classTest(cls) { return new RegExp("(^|\\s)" + cls + "(?:$|\\s)\\s*") }
+
+var rmClass = function(node, cls) {
+ var current = node.className;
+ var match = classTest(cls).exec(current);
+ if (match) {
+ var after = current.slice(match.index + match[0].length);
+ node.className = current.slice(0, match.index) + (after ? match[1] + after : "");
+ }
+};
+
+function removeChildren(e) {
+ for (var count = e.childNodes.length; count > 0; --count)
+ { e.removeChild(e.firstChild); }
+ return e
+}
+
+function removeChildrenAndAdd(parent, e) {
+ return removeChildren(parent).appendChild(e)
+}
+
+function elt(tag, content, className, style) {
+ var e = document.createElement(tag);
+ if (className) { e.className = className; }
+ if (style) { e.style.cssText = style; }
+ if (typeof content == "string") { e.appendChild(document.createTextNode(content)); }
+ else if (content) { for (var i = 0; i < content.length; ++i) { e.appendChild(content[i]); } }
+ return e
+}
+// wrapper for elt, which removes the elt from the accessibility tree
+function eltP(tag, content, className, style) {
+ var e = elt(tag, content, className, style);
+ e.setAttribute("role", "presentation");
+ return e
+}
+
+var range;
+if (document.createRange) { range = function(node, start, end, endNode) {
+ var r = document.createRange();
+ r.setEnd(endNode || node, end);
+ r.setStart(node, start);
+ return r
+}; }
+else { range = function(node, start, end) {
+ var r = document.body.createTextRange();
+ try { r.moveToElementText(node.parentNode); }
+ catch(e) { return r }
+ r.collapse(true);
+ r.moveEnd("character", end);
+ r.moveStart("character", start);
+ return r
+}; }
+
+function contains(parent, child) {
+ if (child.nodeType == 3) // Android browser always returns false when child is a textnode
+ { child = child.parentNode; }
+ if (parent.contains)
+ { return parent.contains(child) }
+ do {
+ if (child.nodeType == 11) { child = child.host; }
+ if (child == parent) { return true }
+ } while (child = child.parentNode)
+}
+
+function activeElt() {
+ // IE and Edge may throw an "Unspecified Error" when accessing document.activeElement.
+ // IE < 10 will throw when accessed while the page is loading or in an iframe.
+ // IE > 9 and Edge will throw when accessed in an iframe if document.body is unavailable.
+ var activeElement;
+ try {
+ activeElement = document.activeElement;
+ } catch(e) {
+ activeElement = document.body || null;
+ }
+ while (activeElement && activeElement.shadowRoot && activeElement.shadowRoot.activeElement)
+ { activeElement = activeElement.shadowRoot.activeElement; }
+ return activeElement
+}
+
+function addClass(node, cls) {
+ var current = node.className;
+ if (!classTest(cls).test(current)) { node.className += (current ? " " : "") + cls; }
+}
+function joinClasses(a, b) {
+ var as = a.split(" ");
+ for (var i = 0; i < as.length; i++)
+ { if (as[i] && !classTest(as[i]).test(b)) { b += " " + as[i]; } }
+ return b
+}
+
+var selectInput = function(node) { node.select(); };
+if (ios) // Mobile Safari apparently has a bug where select() is broken.
+ { selectInput = function(node) { node.selectionStart = 0; node.selectionEnd = node.value.length; }; }
+else if (ie) // Suppress mysterious IE10 errors
+ { selectInput = function(node) { try { node.select(); } catch(_e) {} }; }
+
+function bind(f) {
+ var args = Array.prototype.slice.call(arguments, 1);
+ return function(){return f.apply(null, args)}
+}
+
+function copyObj(obj, target, overwrite) {
+ if (!target) { target = {}; }
+ for (var prop in obj)
+ { if (obj.hasOwnProperty(prop) && (overwrite !== false || !target.hasOwnProperty(prop)))
+ { target[prop] = obj[prop]; } }
+ return target
+}
+
+// Counts the column offset in a string, taking tabs into account.
+// Used mostly to find indentation.
+function countColumn(string, end, tabSize, startIndex, startValue) {
+ if (end == null) {
+ end = string.search(/[^\s\u00a0]/);
+ if (end == -1) { end = string.length; }
+ }
+ for (var i = startIndex || 0, n = startValue || 0;;) {
+ var nextTab = string.indexOf("\t", i);
+ if (nextTab < 0 || nextTab >= end)
+ { return n + (end - i) }
+ n += nextTab - i;
+ n += tabSize - (n % tabSize);
+ i = nextTab + 1;
+ }
+}
+
+var Delayed = function() {this.id = null;};
+Delayed.prototype.set = function (ms, f) {
+ clearTimeout(this.id);
+ this.id = setTimeout(f, ms);
+};
+
+function indexOf(array, elt) {
+ for (var i = 0; i < array.length; ++i)
+ { if (array[i] == elt) { return i } }
+ return -1
+}
+
+// Number of pixels added to scroller and sizer to hide scrollbar
+var scrollerGap = 30;
+
+// Returned or thrown by various protocols to signal 'I'm not
+// handling this'.
+var Pass = {toString: function(){return "CodeMirror.Pass"}};
+
+// Reused option objects for setSelection & friends
+var sel_dontScroll = {scroll: false};
+var sel_mouse = {origin: "*mouse"};
+var sel_move = {origin: "+move"};
+
+// The inverse of countColumn -- find the offset that corresponds to
+// a particular column.
+function findColumn(string, goal, tabSize) {
+ for (var pos = 0, col = 0;;) {
+ var nextTab = string.indexOf("\t", pos);
+ if (nextTab == -1) { nextTab = string.length; }
+ var skipped = nextTab - pos;
+ if (nextTab == string.length || col + skipped >= goal)
+ { return pos + Math.min(skipped, goal - col) }
+ col += nextTab - pos;
+ col += tabSize - (col % tabSize);
+ pos = nextTab + 1;
+ if (col >= goal) { return pos }
+ }
+}
+
+var spaceStrs = [""];
+function spaceStr(n) {
+ while (spaceStrs.length <= n)
+ { spaceStrs.push(lst(spaceStrs) + " "); }
+ return spaceStrs[n]
+}
+
+function lst(arr) { return arr[arr.length-1] }
+
+function map(array, f) {
+ var out = [];
+ for (var i = 0; i < array.length; i++) { out[i] = f(array[i], i); }
+ return out
+}
+
+function insertSorted(array, value, score) {
+ var pos = 0, priority = score(value);
+ while (pos < array.length && score(array[pos]) <= priority) { pos++; }
+ array.splice(pos, 0, value);
+}
+
+function nothing() {}
+
+function createObj(base, props) {
+ var inst;
+ if (Object.create) {
+ inst = Object.create(base);
+ } else {
+ nothing.prototype = base;
+ inst = new nothing();
+ }
+ if (props) { copyObj(props, inst); }
+ return inst
+}
+
+var nonASCIISingleCaseWordChar = /[\u00df\u0587\u0590-\u05f4\u0600-\u06ff\u3040-\u309f\u30a0-\u30ff\u3400-\u4db5\u4e00-\u9fcc\uac00-\ud7af]/;
+function isWordCharBasic(ch) {
+ return /\w/.test(ch) || ch > "\x80" &&
+ (ch.toUpperCase() != ch.toLowerCase() || nonASCIISingleCaseWordChar.test(ch))
+}
+function isWordChar(ch, helper) {
+ if (!helper) { return isWordCharBasic(ch) }
+ if (helper.source.indexOf("\\w") > -1 && isWordCharBasic(ch)) { return true }
+ return helper.test(ch)
+}
+
+function isEmpty(obj) {
+ for (var n in obj) { if (obj.hasOwnProperty(n) && obj[n]) { return false } }
+ return true
+}
+
+// Extending unicode characters. A series of a non-extending char +
+// any number of extending chars is treated as a single unit as far
+// as editing and measuring is concerned. This is not fully correct,
+// since some scripts/fonts/browsers also treat other configurations
+// of code points as a group.
+var extendingChars = /[\u0300-\u036f\u0483-\u0489\u0591-\u05bd\u05bf\u05c1\u05c2\u05c4\u05c5\u05c7\u0610-\u061a\u064b-\u065e\u0670\u06d6-\u06dc\u06de-\u06e4\u06e7\u06e8\u06ea-\u06ed\u0711\u0730-\u074a\u07a6-\u07b0\u07eb-\u07f3\u0816-\u0819\u081b-\u0823\u0825-\u0827\u0829-\u082d\u0900-\u0902\u093c\u0941-\u0948\u094d\u0951-\u0955\u0962\u0963\u0981\u09bc\u09be\u09c1-\u09c4\u09cd\u09d7\u09e2\u09e3\u0a01\u0a02\u0a3c\u0a41\u0a42\u0a47\u0a48\u0a4b-\u0a4d\u0a51\u0a70\u0a71\u0a75\u0a81\u0a82\u0abc\u0ac1-\u0ac5\u0ac7\u0ac8\u0acd\u0ae2\u0ae3\u0b01\u0b3c\u0b3e\u0b3f\u0b41-\u0b44\u0b4d\u0b56\u0b57\u0b62\u0b63\u0b82\u0bbe\u0bc0\u0bcd\u0bd7\u0c3e-\u0c40\u0c46-\u0c48\u0c4a-\u0c4d\u0c55\u0c56\u0c62\u0c63\u0cbc\u0cbf\u0cc2\u0cc6\u0ccc\u0ccd\u0cd5\u0cd6\u0ce2\u0ce3\u0d3e\u0d41-\u0d44\u0d4d\u0d57\u0d62\u0d63\u0dca\u0dcf\u0dd2-\u0dd4\u0dd6\u0ddf\u0e31\u0e34-\u0e3a\u0e47-\u0e4e\u0eb1\u0eb4-\u0eb9\u0ebb\u0ebc\u0ec8-\u0ecd\u0f18\u0f19\u0f35\u0f37\u0f39\u0f71-\u0f7e\u0f80-\u0f84\u0f86\u0f87\u0f90-\u0f97\u0f99-\u0fbc\u0fc6\u102d-\u1030\u1032-\u1037\u1039\u103a\u103d\u103e\u1058\u1059\u105e-\u1060\u1071-\u1074\u1082\u1085\u1086\u108d\u109d\u135f\u1712-\u1714\u1732-\u1734\u1752\u1753\u1772\u1773\u17b7-\u17bd\u17c6\u17c9-\u17d3\u17dd\u180b-\u180d\u18a9\u1920-\u1922\u1927\u1928\u1932\u1939-\u193b\u1a17\u1a18\u1a56\u1a58-\u1a5e\u1a60\u1a62\u1a65-\u1a6c\u1a73-\u1a7c\u1a7f\u1b00-\u1b03\u1b34\u1b36-\u1b3a\u1b3c\u1b42\u1b6b-\u1b73\u1b80\u1b81\u1ba2-\u1ba5\u1ba8\u1ba9\u1c2c-\u1c33\u1c36\u1c37\u1cd0-\u1cd2\u1cd4-\u1ce0\u1ce2-\u1ce8\u1ced\u1dc0-\u1de6\u1dfd-\u1dff\u200c\u200d\u20d0-\u20f0\u2cef-\u2cf1\u2de0-\u2dff\u302a-\u302f\u3099\u309a\ua66f-\ua672\ua67c\ua67d\ua6f0\ua6f1\ua802\ua806\ua80b\ua825\ua826\ua8c4\ua8e0-\ua8f1\ua926-\ua92d\ua947-\ua951\ua980-\ua982\ua9b3\ua9b6-\ua9b9\ua9bc\uaa29-\uaa2e\uaa31\uaa32\uaa35\uaa36\uaa43\uaa4c\uaab0\uaab2-\uaab4\uaab7\uaab8\uaabe\uaabf\uaac1\uabe5\uabe8\uabed\udc00-\udfff\ufb1e\ufe00-\ufe0f\ufe20-\ufe26\uff9e\uff9f]/;
+function isExtendingChar(ch) { return ch.charCodeAt(0) >= 768 && extendingChars.test(ch) }
+
+// Returns a number from the range [`0`; `str.length`] unless `pos` is outside that range.
+function skipExtendingChars(str, pos, dir) {
+ while ((dir < 0 ? pos > 0 : pos < str.length) && isExtendingChar(str.charAt(pos))) { pos += dir; }
+ return pos
+}
+
+// Returns the value from the range [`from`; `to`] that satisfies
+// `pred` and is closest to `from`. Assumes that at least `to`
+// satisfies `pred`. Supports `from` being greater than `to`.
+function findFirst(pred, from, to) {
+ // At any point we are certain `to` satisfies `pred`, don't know
+ // whether `from` does.
+ var dir = from > to ? -1 : 1;
+ for (;;) {
+ if (from == to) { return from }
+ var midF = (from + to) / 2, mid = dir < 0 ? Math.ceil(midF) : Math.floor(midF);
+ if (mid == from) { return pred(mid) ? from : to }
+ if (pred(mid)) { to = mid; }
+ else { from = mid + dir; }
+ }
+}
+
+// The display handles the DOM integration, both for input reading
+// and content drawing. It holds references to DOM nodes and
+// display-related state.
+
+function Display(place, doc, input) {
+ var d = this;
+ this.input = input;
+
+ // Covers bottom-right square when both scrollbars are present.
+ d.scrollbarFiller = elt("div", null, "CodeMirror-scrollbar-filler");
+ d.scrollbarFiller.setAttribute("cm-not-content", "true");
+ // Covers bottom of gutter when coverGutterNextToScrollbar is on
+ // and h scrollbar is present.
+ d.gutterFiller = elt("div", null, "CodeMirror-gutter-filler");
+ d.gutterFiller.setAttribute("cm-not-content", "true");
+ // Will contain the actual code, positioned to cover the viewport.
+ d.lineDiv = eltP("div", null, "CodeMirror-code");
+ // Elements are added to these to represent selection and cursors.
+ d.selectionDiv = elt("div", null, null, "position: relative; z-index: 1");
+ d.cursorDiv = elt("div", null, "CodeMirror-cursors");
+ // A visibility: hidden element used to find the size of things.
+ d.measure = elt("div", null, "CodeMirror-measure");
+ // When lines outside of the viewport are measured, they are drawn in this.
+ d.lineMeasure = elt("div", null, "CodeMirror-measure");
+ // Wraps everything that needs to exist inside the vertically-padded coordinate system
+ d.lineSpace = eltP("div", [d.measure, d.lineMeasure, d.selectionDiv, d.cursorDiv, d.lineDiv],
+ null, "position: relative; outline: none");
+ var lines = eltP("div", [d.lineSpace], "CodeMirror-lines");
+ // Moved around its parent to cover visible view.
+ d.mover = elt("div", [lines], null, "position: relative");
+ // Set to the height of the document, allowing scrolling.
+ d.sizer = elt("div", [d.mover], "CodeMirror-sizer");
+ d.sizerWidth = null;
+ // Behavior of elts with overflow: auto and padding is
+ // inconsistent across browsers. This is used to ensure the
+ // scrollable area is big enough.
+ d.heightForcer = elt("div", null, null, "position: absolute; height: " + scrollerGap + "px; width: 1px;");
+ // Will contain the gutters, if any.
+ d.gutters = elt("div", null, "CodeMirror-gutters");
+ d.lineGutter = null;
+ // Actual scrollable element.
+ d.scroller = elt("div", [d.sizer, d.heightForcer, d.gutters], "CodeMirror-scroll");
+ d.scroller.setAttribute("tabIndex", "-1");
+ // The element in which the editor lives.
+ d.wrapper = elt("div", [d.scrollbarFiller, d.gutterFiller, d.scroller], "CodeMirror");
+
+ // Work around IE7 z-index bug (not perfect, hence IE7 not really being supported)
+ if (ie && ie_version < 8) { d.gutters.style.zIndex = -1; d.scroller.style.paddingRight = 0; }
+ if (!webkit && !(gecko && mobile)) { d.scroller.draggable = true; }
+
+ if (place) {
+ if (place.appendChild) { place.appendChild(d.wrapper); }
+ else { place(d.wrapper); }
+ }
+
+ // Current rendered range (may be bigger than the view window).
+ d.viewFrom = d.viewTo = doc.first;
+ d.reportedViewFrom = d.reportedViewTo = doc.first;
+ // Information about the rendered lines.
+ d.view = [];
+ d.renderedView = null;
+ // Holds info about a single rendered line when it was rendered
+ // for measurement, while not in view.
+ d.externalMeasured = null;
+ // Empty space (in pixels) above the view
+ d.viewOffset = 0;
+ d.lastWrapHeight = d.lastWrapWidth = 0;
+ d.updateLineNumbers = null;
+
+ d.nativeBarWidth = d.barHeight = d.barWidth = 0;
+ d.scrollbarsClipped = false;
+
+ // Used to only resize the line number gutter when necessary (when
+ // the amount of lines crosses a boundary that makes its width change)
+ d.lineNumWidth = d.lineNumInnerWidth = d.lineNumChars = null;
+ // Set to true when a non-horizontal-scrolling line widget is
+ // added. As an optimization, line widget aligning is skipped when
+ // this is false.
+ d.alignWidgets = false;
+
+ d.cachedCharWidth = d.cachedTextHeight = d.cachedPaddingH = null;
+
+ // Tracks the maximum line length so that the horizontal scrollbar
+ // can be kept static when scrolling.
+ d.maxLine = null;
+ d.maxLineLength = 0;
+ d.maxLineChanged = false;
+
+ // Used for measuring wheel scrolling granularity
+ d.wheelDX = d.wheelDY = d.wheelStartX = d.wheelStartY = null;
+
+ // True when shift is held down.
+ d.shift = false;
+
+ // Used to track whether anything happened since the context menu
+ // was opened.
+ d.selForContextMenu = null;
+
+ d.activeTouch = null;
+
+ input.init(d);
+}
+
+// Find the line object corresponding to the given line number.
+function getLine(doc, n) {
+ n -= doc.first;
+ if (n < 0 || n >= doc.size) { throw new Error("There is no line " + (n + doc.first) + " in the document.") }
+ var chunk = doc;
+ while (!chunk.lines) {
+ for (var i = 0;; ++i) {
+ var child = chunk.children[i], sz = child.chunkSize();
+ if (n < sz) { chunk = child; break }
+ n -= sz;
+ }
+ }
+ return chunk.lines[n]
+}
+
+// Get the part of a document between two positions, as an array of
+// strings.
+function getBetween(doc, start, end) {
+ var out = [], n = start.line;
+ doc.iter(start.line, end.line + 1, function (line) {
+ var text = line.text;
+ if (n == end.line) { text = text.slice(0, end.ch); }
+ if (n == start.line) { text = text.slice(start.ch); }
+ out.push(text);
+ ++n;
+ });
+ return out
+}
+// Get the lines between from and to, as array of strings.
+function getLines(doc, from, to) {
+ var out = [];
+ doc.iter(from, to, function (line) { out.push(line.text); }); // iter aborts when callback returns truthy value
+ return out
+}
+
+// Update the height of a line, propagating the height change
+// upwards to parent nodes.
+function updateLineHeight(line, height) {
+ var diff = height - line.height;
+ if (diff) { for (var n = line; n; n = n.parent) { n.height += diff; } }
+}
+
+// Given a line object, find its line number by walking up through
+// its parent links.
+function lineNo(line) {
+ if (line.parent == null) { return null }
+ var cur = line.parent, no = indexOf(cur.lines, line);
+ for (var chunk = cur.parent; chunk; cur = chunk, chunk = chunk.parent) {
+ for (var i = 0;; ++i) {
+ if (chunk.children[i] == cur) { break }
+ no += chunk.children[i].chunkSize();
+ }
+ }
+ return no + cur.first
+}
+
+// Find the line at the given vertical position, using the height
+// information in the document tree.
+function lineAtHeight(chunk, h) {
+ var n = chunk.first;
+ outer: do {
+ for (var i$1 = 0; i$1 < chunk.children.length; ++i$1) {
+ var child = chunk.children[i$1], ch = child.height;
+ if (h < ch) { chunk = child; continue outer }
+ h -= ch;
+ n += child.chunkSize();
+ }
+ return n
+ } while (!chunk.lines)
+ var i = 0;
+ for (; i < chunk.lines.length; ++i) {
+ var line = chunk.lines[i], lh = line.height;
+ if (h < lh) { break }
+ h -= lh;
+ }
+ return n + i
+}
+
+function isLine(doc, l) {return l >= doc.first && l < doc.first + doc.size}
+
+function lineNumberFor(options, i) {
+ return String(options.lineNumberFormatter(i + options.firstLineNumber))
+}
+
+// A Pos instance represents a position within the text.
+function Pos(line, ch, sticky) {
+ if ( sticky === void 0 ) sticky = null;
+
+ if (!(this instanceof Pos)) { return new Pos(line, ch, sticky) }
+ this.line = line;
+ this.ch = ch;
+ this.sticky = sticky;
+}
+
+// Compare two positions, return 0 if they are the same, a negative
+// number when a is less, and a positive number otherwise.
+function cmp(a, b) { return a.line - b.line || a.ch - b.ch }
+
+function equalCursorPos(a, b) { return a.sticky == b.sticky && cmp(a, b) == 0 }
+
+function copyPos(x) {return Pos(x.line, x.ch)}
+function maxPos(a, b) { return cmp(a, b) < 0 ? b : a }
+function minPos(a, b) { return cmp(a, b) < 0 ? a : b }
+
+// Most of the external API clips given positions to make sure they
+// actually exist within the document.
+function clipLine(doc, n) {return Math.max(doc.first, Math.min(n, doc.first + doc.size - 1))}
+function clipPos(doc, pos) {
+ if (pos.line < doc.first) { return Pos(doc.first, 0) }
+ var last = doc.first + doc.size - 1;
+ if (pos.line > last) { return Pos(last, getLine(doc, last).text.length) }
+ return clipToLen(pos, getLine(doc, pos.line).text.length)
+}
+function clipToLen(pos, linelen) {
+ var ch = pos.ch;
+ if (ch == null || ch > linelen) { return Pos(pos.line, linelen) }
+ else if (ch < 0) { return Pos(pos.line, 0) }
+ else { return pos }
+}
+function clipPosArray(doc, array) {
+ var out = [];
+ for (var i = 0; i < array.length; i++) { out[i] = clipPos(doc, array[i]); }
+ return out
+}
+
+// Optimize some code when these features are not used.
+var sawReadOnlySpans = false;
+var sawCollapsedSpans = false;
+
+function seeReadOnlySpans() {
+ sawReadOnlySpans = true;
+}
+
+function seeCollapsedSpans() {
+ sawCollapsedSpans = true;
+}
+
+// TEXTMARKER SPANS
+
+function MarkedSpan(marker, from, to) {
+ this.marker = marker;
+ this.from = from; this.to = to;
+}
+
+// Search an array of spans for a span matching the given marker.
+function getMarkedSpanFor(spans, marker) {
+ if (spans) { for (var i = 0; i < spans.length; ++i) {
+ var span = spans[i];
+ if (span.marker == marker) { return span }
+ } }
+}
+// Remove a span from an array, returning undefined if no spans are
+// left (we don't store arrays for lines without spans).
+function removeMarkedSpan(spans, span) {
+ var r;
+ for (var i = 0; i < spans.length; ++i)
+ { if (spans[i] != span) { (r || (r = [])).push(spans[i]); } }
+ return r
+}
+// Add a span to a line.
+function addMarkedSpan(line, span) {
+ line.markedSpans = line.markedSpans ? line.markedSpans.concat([span]) : [span];
+ span.marker.attachLine(line);
+}
+
+// Used for the algorithm that adjusts markers for a change in the
+// document. These functions cut an array of spans at a given
+// character position, returning an array of remaining chunks (or
+// undefined if nothing remains).
+function markedSpansBefore(old, startCh, isInsert) {
+ var nw;
+ if (old) { for (var i = 0; i < old.length; ++i) {
+ var span = old[i], marker = span.marker;
+ var startsBefore = span.from == null || (marker.inclusiveLeft ? span.from <= startCh : span.from < startCh);
+ if (startsBefore || span.from == startCh && marker.type == "bookmark" && (!isInsert || !span.marker.insertLeft)) {
+ var endsAfter = span.to == null || (marker.inclusiveRight ? span.to >= startCh : span.to > startCh);(nw || (nw = [])).push(new MarkedSpan(marker, span.from, endsAfter ? null : span.to));
+ }
+ } }
+ return nw
+}
+function markedSpansAfter(old, endCh, isInsert) {
+ var nw;
+ if (old) { for (var i = 0; i < old.length; ++i) {
+ var span = old[i], marker = span.marker;
+ var endsAfter = span.to == null || (marker.inclusiveRight ? span.to >= endCh : span.to > endCh);
+ if (endsAfter || span.from == endCh && marker.type == "bookmark" && (!isInsert || span.marker.insertLeft)) {
+ var startsBefore = span.from == null || (marker.inclusiveLeft ? span.from <= endCh : span.from < endCh);(nw || (nw = [])).push(new MarkedSpan(marker, startsBefore ? null : span.from - endCh,
+ span.to == null ? null : span.to - endCh));
+ }
+ } }
+ return nw
+}
+
+// Given a change object, compute the new set of marker spans that
+// cover the line in which the change took place. Removes spans
+// entirely within the change, reconnects spans belonging to the
+// same marker that appear on both sides of the change, and cuts off
+// spans partially within the change. Returns an array of span
+// arrays with one element for each line in (after) the change.
+function stretchSpansOverChange(doc, change) {
+ if (change.full) { return null }
+ var oldFirst = isLine(doc, change.from.line) && getLine(doc, change.from.line).markedSpans;
+ var oldLast = isLine(doc, change.to.line) && getLine(doc, change.to.line).markedSpans;
+ if (!oldFirst && !oldLast) { return null }
+
+ var startCh = change.from.ch, endCh = change.to.ch, isInsert = cmp(change.from, change.to) == 0;
+ // Get the spans that 'stick out' on both sides
+ var first = markedSpansBefore(oldFirst, startCh, isInsert);
+ var last = markedSpansAfter(oldLast, endCh, isInsert);
+
+ // Next, merge those two ends
+ var sameLine = change.text.length == 1, offset = lst(change.text).length + (sameLine ? startCh : 0);
+ if (first) {
+ // Fix up .to properties of first
+ for (var i = 0; i < first.length; ++i) {
+ var span = first[i];
+ if (span.to == null) {
+ var found = getMarkedSpanFor(last, span.marker);
+ if (!found) { span.to = startCh; }
+ else if (sameLine) { span.to = found.to == null ? null : found.to + offset; }
+ }
+ }
+ }
+ if (last) {
+ // Fix up .from in last (or move them into first in case of sameLine)
+ for (var i$1 = 0; i$1 < last.length; ++i$1) {
+ var span$1 = last[i$1];
+ if (span$1.to != null) { span$1.to += offset; }
+ if (span$1.from == null) {
+ var found$1 = getMarkedSpanFor(first, span$1.marker);
+ if (!found$1) {
+ span$1.from = offset;
+ if (sameLine) { (first || (first = [])).push(span$1); }
+ }
+ } else {
+ span$1.from += offset;
+ if (sameLine) { (first || (first = [])).push(span$1); }
+ }
+ }
+ }
+ // Make sure we didn't create any zero-length spans
+ if (first) { first = clearEmptySpans(first); }
+ if (last && last != first) { last = clearEmptySpans(last); }
+
+ var newMarkers = [first];
+ if (!sameLine) {
+ // Fill gap with whole-line-spans
+ var gap = change.text.length - 2, gapMarkers;
+ if (gap > 0 && first)
+ { for (var i$2 = 0; i$2 < first.length; ++i$2)
+ { if (first[i$2].to == null)
+ { (gapMarkers || (gapMarkers = [])).push(new MarkedSpan(first[i$2].marker, null, null)); } } }
+ for (var i$3 = 0; i$3 < gap; ++i$3)
+ { newMarkers.push(gapMarkers); }
+ newMarkers.push(last);
+ }
+ return newMarkers
+}
+
+// Remove spans that are empty and don't have a clearWhenEmpty
+// option of false.
+function clearEmptySpans(spans) {
+ for (var i = 0; i < spans.length; ++i) {
+ var span = spans[i];
+ if (span.from != null && span.from == span.to && span.marker.clearWhenEmpty !== false)
+ { spans.splice(i--, 1); }
+ }
+ if (!spans.length) { return null }
+ return spans
+}
+
+// Used to 'clip' out readOnly ranges when making a change.
+function removeReadOnlyRanges(doc, from, to) {
+ var markers = null;
+ doc.iter(from.line, to.line + 1, function (line) {
+ if (line.markedSpans) { for (var i = 0; i < line.markedSpans.length; ++i) {
+ var mark = line.markedSpans[i].marker;
+ if (mark.readOnly && (!markers || indexOf(markers, mark) == -1))
+ { (markers || (markers = [])).push(mark); }
+ } }
+ });
+ if (!markers) { return null }
+ var parts = [{from: from, to: to}];
+ for (var i = 0; i < markers.length; ++i) {
+ var mk = markers[i], m = mk.find(0);
+ for (var j = 0; j < parts.length; ++j) {
+ var p = parts[j];
+ if (cmp(p.to, m.from) < 0 || cmp(p.from, m.to) > 0) { continue }
+ var newParts = [j, 1], dfrom = cmp(p.from, m.from), dto = cmp(p.to, m.to);
+ if (dfrom < 0 || !mk.inclusiveLeft && !dfrom)
+ { newParts.push({from: p.from, to: m.from}); }
+ if (dto > 0 || !mk.inclusiveRight && !dto)
+ { newParts.push({from: m.to, to: p.to}); }
+ parts.splice.apply(parts, newParts);
+ j += newParts.length - 3;
+ }
+ }
+ return parts
+}
+
+// Connect or disconnect spans from a line.
+function detachMarkedSpans(line) {
+ var spans = line.markedSpans;
+ if (!spans) { return }
+ for (var i = 0; i < spans.length; ++i)
+ { spans[i].marker.detachLine(line); }
+ line.markedSpans = null;
+}
+function attachMarkedSpans(line, spans) {
+ if (!spans) { return }
+ for (var i = 0; i < spans.length; ++i)
+ { spans[i].marker.attachLine(line); }
+ line.markedSpans = spans;
+}
+
+// Helpers used when computing which overlapping collapsed span
+// counts as the larger one.
+function extraLeft(marker) { return marker.inclusiveLeft ? -1 : 0 }
+function extraRight(marker) { return marker.inclusiveRight ? 1 : 0 }
+
+// Returns a number indicating which of two overlapping collapsed
+// spans is larger (and thus includes the other). Falls back to
+// comparing ids when the spans cover exactly the same range.
+function compareCollapsedMarkers(a, b) {
+ var lenDiff = a.lines.length - b.lines.length;
+ if (lenDiff != 0) { return lenDiff }
+ var aPos = a.find(), bPos = b.find();
+ var fromCmp = cmp(aPos.from, bPos.from) || extraLeft(a) - extraLeft(b);
+ if (fromCmp) { return -fromCmp }
+ var toCmp = cmp(aPos.to, bPos.to) || extraRight(a) - extraRight(b);
+ if (toCmp) { return toCmp }
+ return b.id - a.id
+}
+
+// Find out whether a line ends or starts in a collapsed span. If
+// so, return the marker for that span.
+function collapsedSpanAtSide(line, start) {
+ var sps = sawCollapsedSpans && line.markedSpans, found;
+ if (sps) { for (var sp = (void 0), i = 0; i < sps.length; ++i) {
+ sp = sps[i];
+ if (sp.marker.collapsed && (start ? sp.from : sp.to) == null &&
+ (!found || compareCollapsedMarkers(found, sp.marker) < 0))
+ { found = sp.marker; }
+ } }
+ return found
+}
+function collapsedSpanAtStart(line) { return collapsedSpanAtSide(line, true) }
+function collapsedSpanAtEnd(line) { return collapsedSpanAtSide(line, false) }
+
+// Test whether there exists a collapsed span that partially
+// overlaps (covers the start or end, but not both) of a new span.
+// Such overlap is not allowed.
+function conflictingCollapsedRange(doc, lineNo$$1, from, to, marker) {
+ var line = getLine(doc, lineNo$$1);
+ var sps = sawCollapsedSpans && line.markedSpans;
+ if (sps) { for (var i = 0; i < sps.length; ++i) {
+ var sp = sps[i];
+ if (!sp.marker.collapsed) { continue }
+ var found = sp.marker.find(0);
+ var fromCmp = cmp(found.from, from) || extraLeft(sp.marker) - extraLeft(marker);
+ var toCmp = cmp(found.to, to) || extraRight(sp.marker) - extraRight(marker);
+ if (fromCmp >= 0 && toCmp <= 0 || fromCmp <= 0 && toCmp >= 0) { continue }
+ if (fromCmp <= 0 && (sp.marker.inclusiveRight && marker.inclusiveLeft ? cmp(found.to, from) >= 0 : cmp(found.to, from) > 0) ||
+ fromCmp >= 0 && (sp.marker.inclusiveRight && marker.inclusiveLeft ? cmp(found.from, to) <= 0 : cmp(found.from, to) < 0))
+ { return true }
+ } }
+}
+
+// A visual line is a line as drawn on the screen. Folding, for
+// example, can cause multiple logical lines to appear on the same
+// visual line. This finds the start of the visual line that the
+// given line is part of (usually that is the line itself).
+function visualLine(line) {
+ var merged;
+ while (merged = collapsedSpanAtStart(line))
+ { line = merged.find(-1, true).line; }
+ return line
+}
+
+function visualLineEnd(line) {
+ var merged;
+ while (merged = collapsedSpanAtEnd(line))
+ { line = merged.find(1, true).line; }
+ return line
+}
+
+// Returns an array of logical lines that continue the visual line
+// started by the argument, or undefined if there are no such lines.
+function visualLineContinued(line) {
+ var merged, lines;
+ while (merged = collapsedSpanAtEnd(line)) {
+ line = merged.find(1, true).line
+ ;(lines || (lines = [])).push(line);
+ }
+ return lines
+}
+
+// Get the line number of the start of the visual line that the
+// given line number is part of.
+function visualLineNo(doc, lineN) {
+ var line = getLine(doc, lineN), vis = visualLine(line);
+ if (line == vis) { return lineN }
+ return lineNo(vis)
+}
+
+// Get the line number of the start of the next visual line after
+// the given line.
+function visualLineEndNo(doc, lineN) {
+ if (lineN > doc.lastLine()) { return lineN }
+ var line = getLine(doc, lineN), merged;
+ if (!lineIsHidden(doc, line)) { return lineN }
+ while (merged = collapsedSpanAtEnd(line))
+ { line = merged.find(1, true).line; }
+ return lineNo(line) + 1
+}
+
+// Compute whether a line is hidden. Lines count as hidden when they
+// are part of a visual line that starts with another line, or when
+// they are entirely covered by collapsed, non-widget span.
+function lineIsHidden(doc, line) {
+ var sps = sawCollapsedSpans && line.markedSpans;
+ if (sps) { for (var sp = (void 0), i = 0; i < sps.length; ++i) {
+ sp = sps[i];
+ if (!sp.marker.collapsed) { continue }
+ if (sp.from == null) { return true }
+ if (sp.marker.widgetNode) { continue }
+ if (sp.from == 0 && sp.marker.inclusiveLeft && lineIsHiddenInner(doc, line, sp))
+ { return true }
+ } }
+}
+function lineIsHiddenInner(doc, line, span) {
+ if (span.to == null) {
+ var end = span.marker.find(1, true);
+ return lineIsHiddenInner(doc, end.line, getMarkedSpanFor(end.line.markedSpans, span.marker))
+ }
+ if (span.marker.inclusiveRight && span.to == line.text.length)
+ { return true }
+ for (var sp = (void 0), i = 0; i < line.markedSpans.length; ++i) {
+ sp = line.markedSpans[i];
+ if (sp.marker.collapsed && !sp.marker.widgetNode && sp.from == span.to &&
+ (sp.to == null || sp.to != span.from) &&
+ (sp.marker.inclusiveLeft || span.marker.inclusiveRight) &&
+ lineIsHiddenInner(doc, line, sp)) { return true }
+ }
+}
+
+// Find the height above the given line.
+function heightAtLine(lineObj) {
+ lineObj = visualLine(lineObj);
+
+ var h = 0, chunk = lineObj.parent;
+ for (var i = 0; i < chunk.lines.length; ++i) {
+ var line = chunk.lines[i];
+ if (line == lineObj) { break }
+ else { h += line.height; }
+ }
+ for (var p = chunk.parent; p; chunk = p, p = chunk.parent) {
+ for (var i$1 = 0; i$1 < p.children.length; ++i$1) {
+ var cur = p.children[i$1];
+ if (cur == chunk) { break }
+ else { h += cur.height; }
+ }
+ }
+ return h
+}
+
+// Compute the character length of a line, taking into account
+// collapsed ranges (see markText) that might hide parts, and join
+// other lines onto it.
+function lineLength(line) {
+ if (line.height == 0) { return 0 }
+ var len = line.text.length, merged, cur = line;
+ while (merged = collapsedSpanAtStart(cur)) {
+ var found = merged.find(0, true);
+ cur = found.from.line;
+ len += found.from.ch - found.to.ch;
+ }
+ cur = line;
+ while (merged = collapsedSpanAtEnd(cur)) {
+ var found$1 = merged.find(0, true);
+ len -= cur.text.length - found$1.from.ch;
+ cur = found$1.to.line;
+ len += cur.text.length - found$1.to.ch;
+ }
+ return len
+}
+
+// Find the longest line in the document.
+function findMaxLine(cm) {
+ var d = cm.display, doc = cm.doc;
+ d.maxLine = getLine(doc, doc.first);
+ d.maxLineLength = lineLength(d.maxLine);
+ d.maxLineChanged = true;
+ doc.iter(function (line) {
+ var len = lineLength(line);
+ if (len > d.maxLineLength) {
+ d.maxLineLength = len;
+ d.maxLine = line;
+ }
+ });
+}
+
+// BIDI HELPERS
+
+function iterateBidiSections(order, from, to, f) {
+ if (!order) { return f(from, to, "ltr", 0) }
+ var found = false;
+ for (var i = 0; i < order.length; ++i) {
+ var part = order[i];
+ if (part.from < to && part.to > from || from == to && part.to == from) {
+ f(Math.max(part.from, from), Math.min(part.to, to), part.level == 1 ? "rtl" : "ltr", i);
+ found = true;
+ }
+ }
+ if (!found) { f(from, to, "ltr"); }
+}
+
+var bidiOther = null;
+function getBidiPartAt(order, ch, sticky) {
+ var found;
+ bidiOther = null;
+ for (var i = 0; i < order.length; ++i) {
+ var cur = order[i];
+ if (cur.from < ch && cur.to > ch) { return i }
+ if (cur.to == ch) {
+ if (cur.from != cur.to && sticky == "before") { found = i; }
+ else { bidiOther = i; }
+ }
+ if (cur.from == ch) {
+ if (cur.from != cur.to && sticky != "before") { found = i; }
+ else { bidiOther = i; }
+ }
+ }
+ return found != null ? found : bidiOther
+}
+
+// Bidirectional ordering algorithm
+// See http://unicode.org/reports/tr9/tr9-13.html for the algorithm
+// that this (partially) implements.
+
+// One-char codes used for character types:
+// L (L): Left-to-Right
+// R (R): Right-to-Left
+// r (AL): Right-to-Left Arabic
+// 1 (EN): European Number
+// + (ES): European Number Separator
+// % (ET): European Number Terminator
+// n (AN): Arabic Number
+// , (CS): Common Number Separator
+// m (NSM): Non-Spacing Mark
+// b (BN): Boundary Neutral
+// s (B): Paragraph Separator
+// t (S): Segment Separator
+// w (WS): Whitespace
+// N (ON): Other Neutrals
+
+// Returns null if characters are ordered as they appear
+// (left-to-right), or an array of sections ({from, to, level}
+// objects) in the order in which they occur visually.
+var bidiOrdering = (function() {
+ // Character types for codepoints 0 to 0xff
+ var lowTypes = "bbbbbbbbbtstwsbbbbbbbbbbbbbbssstwNN%%%NNNNNN,N,N1111111111NNNNNNNLLLLLLLLLLLLLLLLLLLLLLLLLLNNNNNNLLLLLLLLLLLLLLLLLLLLLLLLLLNNNNbbbbbbsbbbbbbbbbbbbbbbbbbbbbbbbbb,N%%%%NNNNLNNNNN%%11NLNNN1LNNNNNLLLLLLLLLLLLLLLLLLLLLLLNLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLN";
+ // Character types for codepoints 0x600 to 0x6f9
+ var arabicTypes = "nnnnnnNNr%%r,rNNmmmmmmmmmmmrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrmmmmmmmmmmmmmmmmmmmmmnnnnnnnnnn%nnrrrmrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrmmmmmmmnNmmmmmmrrmmNmmmmrr1111111111";
+ function charType(code) {
+ if (code <= 0xf7) { return lowTypes.charAt(code) }
+ else if (0x590 <= code && code <= 0x5f4) { return "R" }
+ else if (0x600 <= code && code <= 0x6f9) { return arabicTypes.charAt(code - 0x600) }
+ else if (0x6ee <= code && code <= 0x8ac) { return "r" }
+ else if (0x2000 <= code && code <= 0x200b) { return "w" }
+ else if (code == 0x200c) { return "b" }
+ else { return "L" }
+ }
+
+ var bidiRE = /[\u0590-\u05f4\u0600-\u06ff\u0700-\u08ac]/;
+ var isNeutral = /[stwN]/, isStrong = /[LRr]/, countsAsLeft = /[Lb1n]/, countsAsNum = /[1n]/;
+
+ function BidiSpan(level, from, to) {
+ this.level = level;
+ this.from = from; this.to = to;
+ }
+
+ return function(str, direction) {
+ var outerType = direction == "ltr" ? "L" : "R";
+
+ if (str.length == 0 || direction == "ltr" && !bidiRE.test(str)) { return false }
+ var len = str.length, types = [];
+ for (var i = 0; i < len; ++i)
+ { types.push(charType(str.charCodeAt(i))); }
+
+ // W1. Examine each non-spacing mark (NSM) in the level run, and
+ // change the type of the NSM to the type of the previous
+ // character. If the NSM is at the start of the level run, it will
+ // get the type of sor.
+ for (var i$1 = 0, prev = outerType; i$1 < len; ++i$1) {
+ var type = types[i$1];
+ if (type == "m") { types[i$1] = prev; }
+ else { prev = type; }
+ }
+
+ // W2. Search backwards from each instance of a European number
+ // until the first strong type (R, L, AL, or sor) is found. If an
+ // AL is found, change the type of the European number to Arabic
+ // number.
+ // W3. Change all ALs to R.
+ for (var i$2 = 0, cur = outerType; i$2 < len; ++i$2) {
+ var type$1 = types[i$2];
+ if (type$1 == "1" && cur == "r") { types[i$2] = "n"; }
+ else if (isStrong.test(type$1)) { cur = type$1; if (type$1 == "r") { types[i$2] = "R"; } }
+ }
+
+ // W4. A single European separator between two European numbers
+ // changes to a European number. A single common separator between
+ // two numbers of the same type changes to that type.
+ for (var i$3 = 1, prev$1 = types[0]; i$3 < len - 1; ++i$3) {
+ var type$2 = types[i$3];
+ if (type$2 == "+" && prev$1 == "1" && types[i$3+1] == "1") { types[i$3] = "1"; }
+ else if (type$2 == "," && prev$1 == types[i$3+1] &&
+ (prev$1 == "1" || prev$1 == "n")) { types[i$3] = prev$1; }
+ prev$1 = type$2;
+ }
+
+ // W5. A sequence of European terminators adjacent to European
+ // numbers changes to all European numbers.
+ // W6. Otherwise, separators and terminators change to Other
+ // Neutral.
+ for (var i$4 = 0; i$4 < len; ++i$4) {
+ var type$3 = types[i$4];
+ if (type$3 == ",") { types[i$4] = "N"; }
+ else if (type$3 == "%") {
+ var end = (void 0);
+ for (end = i$4 + 1; end < len && types[end] == "%"; ++end) {}
+ var replace = (i$4 && types[i$4-1] == "!") || (end < len && types[end] == "1") ? "1" : "N";
+ for (var j = i$4; j < end; ++j) { types[j] = replace; }
+ i$4 = end - 1;
+ }
+ }
+
+ // W7. Search backwards from each instance of a European number
+ // until the first strong type (R, L, or sor) is found. If an L is
+ // found, then change the type of the European number to L.
+ for (var i$5 = 0, cur$1 = outerType; i$5 < len; ++i$5) {
+ var type$4 = types[i$5];
+ if (cur$1 == "L" && type$4 == "1") { types[i$5] = "L"; }
+ else if (isStrong.test(type$4)) { cur$1 = type$4; }
+ }
+
+ // N1. A sequence of neutrals takes the direction of the
+ // surrounding strong text if the text on both sides has the same
+ // direction. European and Arabic numbers act as if they were R in
+ // terms of their influence on neutrals. Start-of-level-run (sor)
+ // and end-of-level-run (eor) are used at level run boundaries.
+ // N2. Any remaining neutrals take the embedding direction.
+ for (var i$6 = 0; i$6 < len; ++i$6) {
+ if (isNeutral.test(types[i$6])) {
+ var end$1 = (void 0);
+ for (end$1 = i$6 + 1; end$1 < len && isNeutral.test(types[end$1]); ++end$1) {}
+ var before = (i$6 ? types[i$6-1] : outerType) == "L";
+ var after = (end$1 < len ? types[end$1] : outerType) == "L";
+ var replace$1 = before == after ? (before ? "L" : "R") : outerType;
+ for (var j$1 = i$6; j$1 < end$1; ++j$1) { types[j$1] = replace$1; }
+ i$6 = end$1 - 1;
+ }
+ }
+
+ // Here we depart from the documented algorithm, in order to avoid
+ // building up an actual levels array. Since there are only three
+ // levels (0, 1, 2) in an implementation that doesn't take
+ // explicit embedding into account, we can build up the order on
+ // the fly, without following the level-based algorithm.
+ var order = [], m;
+ for (var i$7 = 0; i$7 < len;) {
+ if (countsAsLeft.test(types[i$7])) {
+ var start = i$7;
+ for (++i$7; i$7 < len && countsAsLeft.test(types[i$7]); ++i$7) {}
+ order.push(new BidiSpan(0, start, i$7));
+ } else {
+ var pos = i$7, at = order.length;
+ for (++i$7; i$7 < len && types[i$7] != "L"; ++i$7) {}
+ for (var j$2 = pos; j$2 < i$7;) {
+ if (countsAsNum.test(types[j$2])) {
+ if (pos < j$2) { order.splice(at, 0, new BidiSpan(1, pos, j$2)); }
+ var nstart = j$2;
+ for (++j$2; j$2 < i$7 && countsAsNum.test(types[j$2]); ++j$2) {}
+ order.splice(at, 0, new BidiSpan(2, nstart, j$2));
+ pos = j$2;
+ } else { ++j$2; }
+ }
+ if (pos < i$7) { order.splice(at, 0, new BidiSpan(1, pos, i$7)); }
+ }
+ }
+ if (direction == "ltr") {
+ if (order[0].level == 1 && (m = str.match(/^\s+/))) {
+ order[0].from = m[0].length;
+ order.unshift(new BidiSpan(0, 0, m[0].length));
+ }
+ if (lst(order).level == 1 && (m = str.match(/\s+$/))) {
+ lst(order).to -= m[0].length;
+ order.push(new BidiSpan(0, len - m[0].length, len));
+ }
+ }
+
+ return direction == "rtl" ? order.reverse() : order
+ }
+})();
+
+// Get the bidi ordering for the given line (and cache it). Returns
+// false for lines that are fully left-to-right, and an array of
+// BidiSpan objects otherwise.
+function getOrder(line, direction) {
+ var order = line.order;
+ if (order == null) { order = line.order = bidiOrdering(line.text, direction); }
+ return order
+}
+
+// EVENT HANDLING
+
+// Lightweight event framework. on/off also work on DOM nodes,
+// registering native DOM handlers.
+
+var noHandlers = [];
+
+var on = function(emitter, type, f) {
+ if (emitter.addEventListener) {
+ emitter.addEventListener(type, f, false);
+ } else if (emitter.attachEvent) {
+ emitter.attachEvent("on" + type, f);
+ } else {
+ var map$$1 = emitter._handlers || (emitter._handlers = {});
+ map$$1[type] = (map$$1[type] || noHandlers).concat(f);
+ }
+};
+
+function getHandlers(emitter, type) {
+ return emitter._handlers && emitter._handlers[type] || noHandlers
+}
+
+function off(emitter, type, f) {
+ if (emitter.removeEventListener) {
+ emitter.removeEventListener(type, f, false);
+ } else if (emitter.detachEvent) {
+ emitter.detachEvent("on" + type, f);
+ } else {
+ var map$$1 = emitter._handlers, arr = map$$1 && map$$1[type];
+ if (arr) {
+ var index = indexOf(arr, f);
+ if (index > -1)
+ { map$$1[type] = arr.slice(0, index).concat(arr.slice(index + 1)); }
+ }
+ }
+}
+
+function signal(emitter, type /*, values...*/) {
+ var handlers = getHandlers(emitter, type);
+ if (!handlers.length) { return }
+ var args = Array.prototype.slice.call(arguments, 2);
+ for (var i = 0; i < handlers.length; ++i) { handlers[i].apply(null, args); }
+}
+
+// The DOM events that CodeMirror handles can be overridden by
+// registering a (non-DOM) handler on the editor for the event name,
+// and preventDefault-ing the event in that handler.
+function signalDOMEvent(cm, e, override) {
+ if (typeof e == "string")
+ { e = {type: e, preventDefault: function() { this.defaultPrevented = true; }}; }
+ signal(cm, override || e.type, cm, e);
+ return e_defaultPrevented(e) || e.codemirrorIgnore
+}
+
+function signalCursorActivity(cm) {
+ var arr = cm._handlers && cm._handlers.cursorActivity;
+ if (!arr) { return }
+ var set = cm.curOp.cursorActivityHandlers || (cm.curOp.cursorActivityHandlers = []);
+ for (var i = 0; i < arr.length; ++i) { if (indexOf(set, arr[i]) == -1)
+ { set.push(arr[i]); } }
+}
+
+function hasHandler(emitter, type) {
+ return getHandlers(emitter, type).length > 0
+}
+
+// Add on and off methods to a constructor's prototype, to make
+// registering events on such objects more convenient.
+function eventMixin(ctor) {
+ ctor.prototype.on = function(type, f) {on(this, type, f);};
+ ctor.prototype.off = function(type, f) {off(this, type, f);};
+}
+
+// Due to the fact that we still support jurassic IE versions, some
+// compatibility wrappers are needed.
+
+function e_preventDefault(e) {
+ if (e.preventDefault) { e.preventDefault(); }
+ else { e.returnValue = false; }
+}
+function e_stopPropagation(e) {
+ if (e.stopPropagation) { e.stopPropagation(); }
+ else { e.cancelBubble = true; }
+}
+function e_defaultPrevented(e) {
+ return e.defaultPrevented != null ? e.defaultPrevented : e.returnValue == false
+}
+function e_stop(e) {e_preventDefault(e); e_stopPropagation(e);}
+
+function e_target(e) {return e.target || e.srcElement}
+function e_button(e) {
+ var b = e.which;
+ if (b == null) {
+ if (e.button & 1) { b = 1; }
+ else if (e.button & 2) { b = 3; }
+ else if (e.button & 4) { b = 2; }
+ }
+ if (mac && e.ctrlKey && b == 1) { b = 3; }
+ return b
+}
+
+// Detect drag-and-drop
+var dragAndDrop = function() {
+ // There is *some* kind of drag-and-drop support in IE6-8, but I
+ // couldn't get it to work yet.
+ if (ie && ie_version < 9) { return false }
+ var div = elt('div');
+ return "draggable" in div || "dragDrop" in div
+}();
+
+var zwspSupported;
+function zeroWidthElement(measure) {
+ if (zwspSupported == null) {
+ var test = elt("span", "\u200b");
+ removeChildrenAndAdd(measure, elt("span", [test, document.createTextNode("x")]));
+ if (measure.firstChild.offsetHeight != 0)
+ { zwspSupported = test.offsetWidth <= 1 && test.offsetHeight > 2 && !(ie && ie_version < 8); }
+ }
+ var node = zwspSupported ? elt("span", "\u200b") :
+ elt("span", "\u00a0", null, "display: inline-block; width: 1px; margin-right: -1px");
+ node.setAttribute("cm-text", "");
+ return node
+}
+
+// Feature-detect IE's crummy client rect reporting for bidi text
+var badBidiRects;
+function hasBadBidiRects(measure) {
+ if (badBidiRects != null) { return badBidiRects }
+ var txt = removeChildrenAndAdd(measure, document.createTextNode("A\u062eA"));
+ var r0 = range(txt, 0, 1).getBoundingClientRect();
+ var r1 = range(txt, 1, 2).getBoundingClientRect();
+ removeChildren(measure);
+ if (!r0 || r0.left == r0.right) { return false } // Safari returns null in some cases (#2780)
+ return badBidiRects = (r1.right - r0.right < 3)
+}
+
+// See if "".split is the broken IE version, if so, provide an
+// alternative way to split lines.
+var splitLinesAuto = "\n\nb".split(/\n/).length != 3 ? function (string) {
+ var pos = 0, result = [], l = string.length;
+ while (pos <= l) {
+ var nl = string.indexOf("\n", pos);
+ if (nl == -1) { nl = string.length; }
+ var line = string.slice(pos, string.charAt(nl - 1) == "\r" ? nl - 1 : nl);
+ var rt = line.indexOf("\r");
+ if (rt != -1) {
+ result.push(line.slice(0, rt));
+ pos += rt + 1;
+ } else {
+ result.push(line);
+ pos = nl + 1;
+ }
+ }
+ return result
+} : function (string) { return string.split(/\r\n?|\n/); };
+
+var hasSelection = window.getSelection ? function (te) {
+ try { return te.selectionStart != te.selectionEnd }
+ catch(e) { return false }
+} : function (te) {
+ var range$$1;
+ try {range$$1 = te.ownerDocument.selection.createRange();}
+ catch(e) {}
+ if (!range$$1 || range$$1.parentElement() != te) { return false }
+ return range$$1.compareEndPoints("StartToEnd", range$$1) != 0
+};
+
+var hasCopyEvent = (function () {
+ var e = elt("div");
+ if ("oncopy" in e) { return true }
+ e.setAttribute("oncopy", "return;");
+ return typeof e.oncopy == "function"
+})();
+
+var badZoomedRects = null;
+function hasBadZoomedRects(measure) {
+ if (badZoomedRects != null) { return badZoomedRects }
+ var node = removeChildrenAndAdd(measure, elt("span", "x"));
+ var normal = node.getBoundingClientRect();
+ var fromRange = range(node, 0, 1).getBoundingClientRect();
+ return badZoomedRects = Math.abs(normal.left - fromRange.left) > 1
+}
+
+// Known modes, by name and by MIME
+var modes = {};
+var mimeModes = {};
+
+// Extra arguments are stored as the mode's dependencies, which is
+// used by (legacy) mechanisms like loadmode.js to automatically
+// load a mode. (Preferred mechanism is the require/define calls.)
+function defineMode(name, mode) {
+ if (arguments.length > 2)
+ { mode.dependencies = Array.prototype.slice.call(arguments, 2); }
+ modes[name] = mode;
+}
+
+function defineMIME(mime, spec) {
+ mimeModes[mime] = spec;
+}
+
+// Given a MIME type, a {name, ...options} config object, or a name
+// string, return a mode config object.
+function resolveMode(spec) {
+ if (typeof spec == "string" && mimeModes.hasOwnProperty(spec)) {
+ spec = mimeModes[spec];
+ } else if (spec && typeof spec.name == "string" && mimeModes.hasOwnProperty(spec.name)) {
+ var found = mimeModes[spec.name];
+ if (typeof found == "string") { found = {name: found}; }
+ spec = createObj(found, spec);
+ spec.name = found.name;
+ } else if (typeof spec == "string" && /^[\w\-]+\/[\w\-]+\+xml$/.test(spec)) {
+ return resolveMode("application/xml")
+ } else if (typeof spec == "string" && /^[\w\-]+\/[\w\-]+\+json$/.test(spec)) {
+ return resolveMode("application/json")
+ }
+ if (typeof spec == "string") { return {name: spec} }
+ else { return spec || {name: "null"} }
+}
+
+// Given a mode spec (anything that resolveMode accepts), find and
+// initialize an actual mode object.
+function getMode(options, spec) {
+ spec = resolveMode(spec);
+ var mfactory = modes[spec.name];
+ if (!mfactory) { return getMode(options, "text/plain") }
+ var modeObj = mfactory(options, spec);
+ if (modeExtensions.hasOwnProperty(spec.name)) {
+ var exts = modeExtensions[spec.name];
+ for (var prop in exts) {
+ if (!exts.hasOwnProperty(prop)) { continue }
+ if (modeObj.hasOwnProperty(prop)) { modeObj["_" + prop] = modeObj[prop]; }
+ modeObj[prop] = exts[prop];
+ }
+ }
+ modeObj.name = spec.name;
+ if (spec.helperType) { modeObj.helperType = spec.helperType; }
+ if (spec.modeProps) { for (var prop$1 in spec.modeProps)
+ { modeObj[prop$1] = spec.modeProps[prop$1]; } }
+
+ return modeObj
+}
+
+// This can be used to attach properties to mode objects from
+// outside the actual mode definition.
+var modeExtensions = {};
+function extendMode(mode, properties) {
+ var exts = modeExtensions.hasOwnProperty(mode) ? modeExtensions[mode] : (modeExtensions[mode] = {});
+ copyObj(properties, exts);
+}
+
+function copyState(mode, state) {
+ if (state === true) { return state }
+ if (mode.copyState) { return mode.copyState(state) }
+ var nstate = {};
+ for (var n in state) {
+ var val = state[n];
+ if (val instanceof Array) { val = val.concat([]); }
+ nstate[n] = val;
+ }
+ return nstate
+}
+
+// Given a mode and a state (for that mode), find the inner mode and
+// state at the position that the state refers to.
+function innerMode(mode, state) {
+ var info;
+ while (mode.innerMode) {
+ info = mode.innerMode(state);
+ if (!info || info.mode == mode) { break }
+ state = info.state;
+ mode = info.mode;
+ }
+ return info || {mode: mode, state: state}
+}
+
+function startState(mode, a1, a2) {
+ return mode.startState ? mode.startState(a1, a2) : true
+}
+
+// STRING STREAM
+
+// Fed to the mode parsers, provides helper functions to make
+// parsers more succinct.
+
+var StringStream = function(string, tabSize, lineOracle) {
+ this.pos = this.start = 0;
+ this.string = string;
+ this.tabSize = tabSize || 8;
+ this.lastColumnPos = this.lastColumnValue = 0;
+ this.lineStart = 0;
+ this.lineOracle = lineOracle;
+};
+
+StringStream.prototype.eol = function () {return this.pos >= this.string.length};
+StringStream.prototype.sol = function () {return this.pos == this.lineStart};
+StringStream.prototype.peek = function () {return this.string.charAt(this.pos) || undefined};
+StringStream.prototype.next = function () {
+ if (this.pos < this.string.length)
+ { return this.string.charAt(this.pos++) }
+};
+StringStream.prototype.eat = function (match) {
+ var ch = this.string.charAt(this.pos);
+ var ok;
+ if (typeof match == "string") { ok = ch == match; }
+ else { ok = ch && (match.test ? match.test(ch) : match(ch)); }
+ if (ok) {++this.pos; return ch}
+};
+StringStream.prototype.eatWhile = function (match) {
+ var start = this.pos;
+ while (this.eat(match)){}
+ return this.pos > start
+};
+StringStream.prototype.eatSpace = function () {
+ var this$1 = this;
+
+ var start = this.pos;
+ while (/[\s\u00a0]/.test(this.string.charAt(this.pos))) { ++this$1.pos; }
+ return this.pos > start
+};
+StringStream.prototype.skipToEnd = function () {this.pos = this.string.length;};
+StringStream.prototype.skipTo = function (ch) {
+ var found = this.string.indexOf(ch, this.pos);
+ if (found > -1) {this.pos = found; return true}
+};
+StringStream.prototype.backUp = function (n) {this.pos -= n;};
+StringStream.prototype.column = function () {
+ if (this.lastColumnPos < this.start) {
+ this.lastColumnValue = countColumn(this.string, this.start, this.tabSize, this.lastColumnPos, this.lastColumnValue);
+ this.lastColumnPos = this.start;
+ }
+ return this.lastColumnValue - (this.lineStart ? countColumn(this.string, this.lineStart, this.tabSize) : 0)
+};
+StringStream.prototype.indentation = function () {
+ return countColumn(this.string, null, this.tabSize) -
+ (this.lineStart ? countColumn(this.string, this.lineStart, this.tabSize) : 0)
+};
+StringStream.prototype.match = function (pattern, consume, caseInsensitive) {
+ if (typeof pattern == "string") {
+ var cased = function (str) { return caseInsensitive ? str.toLowerCase() : str; };
+ var substr = this.string.substr(this.pos, pattern.length);
+ if (cased(substr) == cased(pattern)) {
+ if (consume !== false) { this.pos += pattern.length; }
+ return true
+ }
+ } else {
+ var match = this.string.slice(this.pos).match(pattern);
+ if (match && match.index > 0) { return null }
+ if (match && consume !== false) { this.pos += match[0].length; }
+ return match
+ }
+};
+StringStream.prototype.current = function (){return this.string.slice(this.start, this.pos)};
+StringStream.prototype.hideFirstChars = function (n, inner) {
+ this.lineStart += n;
+ try { return inner() }
+ finally { this.lineStart -= n; }
+};
+StringStream.prototype.lookAhead = function (n) {
+ var oracle = this.lineOracle;
+ return oracle && oracle.lookAhead(n)
+};
+StringStream.prototype.baseToken = function () {
+ var oracle = this.lineOracle;
+ return oracle && oracle.baseToken(this.pos)
+};
+
+var SavedContext = function(state, lookAhead) {
+ this.state = state;
+ this.lookAhead = lookAhead;
+};
+
+var Context = function(doc, state, line, lookAhead) {
+ this.state = state;
+ this.doc = doc;
+ this.line = line;
+ this.maxLookAhead = lookAhead || 0;
+ this.baseTokens = null;
+ this.baseTokenPos = 1;
+};
+
+Context.prototype.lookAhead = function (n) {
+ var line = this.doc.getLine(this.line + n);
+ if (line != null && n > this.maxLookAhead) { this.maxLookAhead = n; }
+ return line
+};
+
+Context.prototype.baseToken = function (n) {
+ var this$1 = this;
+
+ if (!this.baseTokens) { return null }
+ while (this.baseTokens[this.baseTokenPos] <= n)
+ { this$1.baseTokenPos += 2; }
+ var type = this.baseTokens[this.baseTokenPos + 1];
+ return {type: type && type.replace(/( |^)overlay .*/, ""),
+ size: this.baseTokens[this.baseTokenPos] - n}
+};
+
+Context.prototype.nextLine = function () {
+ this.line++;
+ if (this.maxLookAhead > 0) { this.maxLookAhead--; }
+};
+
+Context.fromSaved = function (doc, saved, line) {
+ if (saved instanceof SavedContext)
+ { return new Context(doc, copyState(doc.mode, saved.state), line, saved.lookAhead) }
+ else
+ { return new Context(doc, copyState(doc.mode, saved), line) }
+};
+
+Context.prototype.save = function (copy) {
+ var state = copy !== false ? copyState(this.doc.mode, this.state) : this.state;
+ return this.maxLookAhead > 0 ? new SavedContext(state, this.maxLookAhead) : state
+};
+
+
+// Compute a style array (an array starting with a mode generation
+// -- for invalidation -- followed by pairs of end positions and
+// style strings), which is used to highlight the tokens on the
+// line.
+function highlightLine(cm, line, context, forceToEnd) {
+ // A styles array always starts with a number identifying the
+ // mode/overlays that it is based on (for easy invalidation).
+ var st = [cm.state.modeGen], lineClasses = {};
+ // Compute the base array of styles
+ runMode(cm, line.text, cm.doc.mode, context, function (end, style) { return st.push(end, style); },
+ lineClasses, forceToEnd);
+ var state = context.state;
+
+ // Run overlays, adjust style array.
+ var loop = function ( o ) {
+ context.baseTokens = st;
+ var overlay = cm.state.overlays[o], i = 1, at = 0;
+ context.state = true;
+ runMode(cm, line.text, overlay.mode, context, function (end, style) {
+ var start = i;
+ // Ensure there's a token end at the current position, and that i points at it
+ while (at < end) {
+ var i_end = st[i];
+ if (i_end > end)
+ { st.splice(i, 1, end, st[i+1], i_end); }
+ i += 2;
+ at = Math.min(end, i_end);
+ }
+ if (!style) { return }
+ if (overlay.opaque) {
+ st.splice(start, i - start, end, "overlay " + style);
+ i = start + 2;
+ } else {
+ for (; start < i; start += 2) {
+ var cur = st[start+1];
+ st[start+1] = (cur ? cur + " " : "") + "overlay " + style;
+ }
+ }
+ }, lineClasses);
+ context.state = state;
+ context.baseTokens = null;
+ context.baseTokenPos = 1;
+ };
+
+ for (var o = 0; o < cm.state.overlays.length; ++o) loop( o );
+
+ return {styles: st, classes: lineClasses.bgClass || lineClasses.textClass ? lineClasses : null}
+}
+
+function getLineStyles(cm, line, updateFrontier) {
+ if (!line.styles || line.styles[0] != cm.state.modeGen) {
+ var context = getContextBefore(cm, lineNo(line));
+ var resetState = line.text.length > cm.options.maxHighlightLength && copyState(cm.doc.mode, context.state);
+ var result = highlightLine(cm, line, context);
+ if (resetState) { context.state = resetState; }
+ line.stateAfter = context.save(!resetState);
+ line.styles = result.styles;
+ if (result.classes) { line.styleClasses = result.classes; }
+ else if (line.styleClasses) { line.styleClasses = null; }
+ if (updateFrontier === cm.doc.highlightFrontier)
+ { cm.doc.modeFrontier = Math.max(cm.doc.modeFrontier, ++cm.doc.highlightFrontier); }
+ }
+ return line.styles
+}
+
+function getContextBefore(cm, n, precise) {
+ var doc = cm.doc, display = cm.display;
+ if (!doc.mode.startState) { return new Context(doc, true, n) }
+ var start = findStartLine(cm, n, precise);
+ var saved = start > doc.first && getLine(doc, start - 1).stateAfter;
+ var context = saved ? Context.fromSaved(doc, saved, start) : new Context(doc, startState(doc.mode), start);
+
+ doc.iter(start, n, function (line) {
+ processLine(cm, line.text, context);
+ var pos = context.line;
+ line.stateAfter = pos == n - 1 || pos % 5 == 0 || pos >= display.viewFrom && pos < display.viewTo ? context.save() : null;
+ context.nextLine();
+ });
+ if (precise) { doc.modeFrontier = context.line; }
+ return context
+}
+
+// Lightweight form of highlight -- proceed over this line and
+// update state, but don't save a style array. Used for lines that
+// aren't currently visible.
+function processLine(cm, text, context, startAt) {
+ var mode = cm.doc.mode;
+ var stream = new StringStream(text, cm.options.tabSize, context);
+ stream.start = stream.pos = startAt || 0;
+ if (text == "") { callBlankLine(mode, context.state); }
+ while (!stream.eol()) {
+ readToken(mode, stream, context.state);
+ stream.start = stream.pos;
+ }
+}
+
+function callBlankLine(mode, state) {
+ if (mode.blankLine) { return mode.blankLine(state) }
+ if (!mode.innerMode) { return }
+ var inner = innerMode(mode, state);
+ if (inner.mode.blankLine) { return inner.mode.blankLine(inner.state) }
+}
+
+function readToken(mode, stream, state, inner) {
+ for (var i = 0; i < 10; i++) {
+ if (inner) { inner[0] = innerMode(mode, state).mode; }
+ var style = mode.token(stream, state);
+ if (stream.pos > stream.start) { return style }
+ }
+ throw new Error("Mode " + mode.name + " failed to advance stream.")
+}
+
+var Token = function(stream, type, state) {
+ this.start = stream.start; this.end = stream.pos;
+ this.string = stream.current();
+ this.type = type || null;
+ this.state = state;
+};
+
+// Utility for getTokenAt and getLineTokens
+function takeToken(cm, pos, precise, asArray) {
+ var doc = cm.doc, mode = doc.mode, style;
+ pos = clipPos(doc, pos);
+ var line = getLine(doc, pos.line), context = getContextBefore(cm, pos.line, precise);
+ var stream = new StringStream(line.text, cm.options.tabSize, context), tokens;
+ if (asArray) { tokens = []; }
+ while ((asArray || stream.pos < pos.ch) && !stream.eol()) {
+ stream.start = stream.pos;
+ style = readToken(mode, stream, context.state);
+ if (asArray) { tokens.push(new Token(stream, style, copyState(doc.mode, context.state))); }
+ }
+ return asArray ? tokens : new Token(stream, style, context.state)
+}
+
+function extractLineClasses(type, output) {
+ if (type) { for (;;) {
+ var lineClass = type.match(/(?:^|\s+)line-(background-)?(\S+)/);
+ if (!lineClass) { break }
+ type = type.slice(0, lineClass.index) + type.slice(lineClass.index + lineClass[0].length);
+ var prop = lineClass[1] ? "bgClass" : "textClass";
+ if (output[prop] == null)
+ { output[prop] = lineClass[2]; }
+ else if (!(new RegExp("(?:^|\s)" + lineClass[2] + "(?:$|\s)")).test(output[prop]))
+ { output[prop] += " " + lineClass[2]; }
+ } }
+ return type
+}
+
+// Run the given mode's parser over a line, calling f for each token.
+function runMode(cm, text, mode, context, f, lineClasses, forceToEnd) {
+ var flattenSpans = mode.flattenSpans;
+ if (flattenSpans == null) { flattenSpans = cm.options.flattenSpans; }
+ var curStart = 0, curStyle = null;
+ var stream = new StringStream(text, cm.options.tabSize, context), style;
+ var inner = cm.options.addModeClass && [null];
+ if (text == "") { extractLineClasses(callBlankLine(mode, context.state), lineClasses); }
+ while (!stream.eol()) {
+ if (stream.pos > cm.options.maxHighlightLength) {
+ flattenSpans = false;
+ if (forceToEnd) { processLine(cm, text, context, stream.pos); }
+ stream.pos = text.length;
+ style = null;
+ } else {
+ style = extractLineClasses(readToken(mode, stream, context.state, inner), lineClasses);
+ }
+ if (inner) {
+ var mName = inner[0].name;
+ if (mName) { style = "m-" + (style ? mName + " " + style : mName); }
+ }
+ if (!flattenSpans || curStyle != style) {
+ while (curStart < stream.start) {
+ curStart = Math.min(stream.start, curStart + 5000);
+ f(curStart, curStyle);
+ }
+ curStyle = style;
+ }
+ stream.start = stream.pos;
+ }
+ while (curStart < stream.pos) {
+ // Webkit seems to refuse to render text nodes longer than 57444
+ // characters, and returns inaccurate measurements in nodes
+ // starting around 5000 chars.
+ var pos = Math.min(stream.pos, curStart + 5000);
+ f(pos, curStyle);
+ curStart = pos;
+ }
+}
+
+// Finds the line to start with when starting a parse. Tries to
+// find a line with a stateAfter, so that it can start with a
+// valid state. If that fails, it returns the line with the
+// smallest indentation, which tends to need the least context to
+// parse correctly.
+function findStartLine(cm, n, precise) {
+ var minindent, minline, doc = cm.doc;
+ var lim = precise ? -1 : n - (cm.doc.mode.innerMode ? 1000 : 100);
+ for (var search = n; search > lim; --search) {
+ if (search <= doc.first) { return doc.first }
+ var line = getLine(doc, search - 1), after = line.stateAfter;
+ if (after && (!precise || search + (after instanceof SavedContext ? after.lookAhead : 0) <= doc.modeFrontier))
+ { return search }
+ var indented = countColumn(line.text, null, cm.options.tabSize);
+ if (minline == null || minindent > indented) {
+ minline = search - 1;
+ minindent = indented;
+ }
+ }
+ return minline
+}
+
+function retreatFrontier(doc, n) {
+ doc.modeFrontier = Math.min(doc.modeFrontier, n);
+ if (doc.highlightFrontier < n - 10) { return }
+ var start = doc.first;
+ for (var line = n - 1; line > start; line--) {
+ var saved = getLine(doc, line).stateAfter;
+ // change is on 3
+ // state on line 1 looked ahead 2 -- so saw 3
+ // test 1 + 2 < 3 should cover this
+ if (saved && (!(saved instanceof SavedContext) || line + saved.lookAhead < n)) {
+ start = line + 1;
+ break
+ }
+ }
+ doc.highlightFrontier = Math.min(doc.highlightFrontier, start);
+}
+
+// LINE DATA STRUCTURE
+
+// Line objects. These hold state related to a line, including
+// highlighting info (the styles array).
+var Line = function(text, markedSpans, estimateHeight) {
+ this.text = text;
+ attachMarkedSpans(this, markedSpans);
+ this.height = estimateHeight ? estimateHeight(this) : 1;
+};
+
+Line.prototype.lineNo = function () { return lineNo(this) };
+eventMixin(Line);
+
+// Change the content (text, markers) of a line. Automatically
+// invalidates cached information and tries to re-estimate the
+// line's height.
+function updateLine(line, text, markedSpans, estimateHeight) {
+ line.text = text;
+ if (line.stateAfter) { line.stateAfter = null; }
+ if (line.styles) { line.styles = null; }
+ if (line.order != null) { line.order = null; }
+ detachMarkedSpans(line);
+ attachMarkedSpans(line, markedSpans);
+ var estHeight = estimateHeight ? estimateHeight(line) : 1;
+ if (estHeight != line.height) { updateLineHeight(line, estHeight); }
+}
+
+// Detach a line from the document tree and its markers.
+function cleanUpLine(line) {
+ line.parent = null;
+ detachMarkedSpans(line);
+}
+
+// Convert a style as returned by a mode (either null, or a string
+// containing one or more styles) to a CSS style. This is cached,
+// and also looks for line-wide styles.
+var styleToClassCache = {};
+var styleToClassCacheWithMode = {};
+function interpretTokenStyle(style, options) {
+ if (!style || /^\s*$/.test(style)) { return null }
+ var cache = options.addModeClass ? styleToClassCacheWithMode : styleToClassCache;
+ return cache[style] ||
+ (cache[style] = style.replace(/\S+/g, "cm-$&"))
+}
+
+// Render the DOM representation of the text of a line. Also builds
+// up a 'line map', which points at the DOM nodes that represent
+// specific stretches of text, and is used by the measuring code.
+// The returned object contains the DOM node, this map, and
+// information about line-wide styles that were set by the mode.
+function buildLineContent(cm, lineView) {
+ // The padding-right forces the element to have a 'border', which
+ // is needed on Webkit to be able to get line-level bounding
+ // rectangles for it (in measureChar).
+ var content = eltP("span", null, null, webkit ? "padding-right: .1px" : null);
+ var builder = {pre: eltP("pre", [content], "CodeMirror-line"), content: content,
+ col: 0, pos: 0, cm: cm,
+ trailingSpace: false,
+ splitSpaces: (ie || webkit) && cm.getOption("lineWrapping")};
+ lineView.measure = {};
+
+ // Iterate over the logical lines that make up this visual line.
+ for (var i = 0; i <= (lineView.rest ? lineView.rest.length : 0); i++) {
+ var line = i ? lineView.rest[i - 1] : lineView.line, order = (void 0);
+ builder.pos = 0;
+ builder.addToken = buildToken;
+ // Optionally wire in some hacks into the token-rendering
+ // algorithm, to deal with browser quirks.
+ if (hasBadBidiRects(cm.display.measure) && (order = getOrder(line, cm.doc.direction)))
+ { builder.addToken = buildTokenBadBidi(builder.addToken, order); }
+ builder.map = [];
+ var allowFrontierUpdate = lineView != cm.display.externalMeasured && lineNo(line);
+ insertLineContent(line, builder, getLineStyles(cm, line, allowFrontierUpdate));
+ if (line.styleClasses) {
+ if (line.styleClasses.bgClass)
+ { builder.bgClass = joinClasses(line.styleClasses.bgClass, builder.bgClass || ""); }
+ if (line.styleClasses.textClass)
+ { builder.textClass = joinClasses(line.styleClasses.textClass, builder.textClass || ""); }
+ }
+
+ // Ensure at least a single node is present, for measuring.
+ if (builder.map.length == 0)
+ { builder.map.push(0, 0, builder.content.appendChild(zeroWidthElement(cm.display.measure))); }
+
+ // Store the map and a cache object for the current logical line
+ if (i == 0) {
+ lineView.measure.map = builder.map;
+ lineView.measure.cache = {};
+ } else {
+ (lineView.measure.maps || (lineView.measure.maps = [])).push(builder.map)
+ ;(lineView.measure.caches || (lineView.measure.caches = [])).push({});
+ }
+ }
+
+ // See issue #2901
+ if (webkit) {
+ var last = builder.content.lastChild;
+ if (/\bcm-tab\b/.test(last.className) || (last.querySelector && last.querySelector(".cm-tab")))
+ { builder.content.className = "cm-tab-wrap-hack"; }
+ }
+
+ signal(cm, "renderLine", cm, lineView.line, builder.pre);
+ if (builder.pre.className)
+ { builder.textClass = joinClasses(builder.pre.className, builder.textClass || ""); }
+
+ return builder
+}
+
+function defaultSpecialCharPlaceholder(ch) {
+ var token = elt("span", "\u2022", "cm-invalidchar");
+ token.title = "\\u" + ch.charCodeAt(0).toString(16);
+ token.setAttribute("aria-label", token.title);
+ return token
+}
+
+// Build up the DOM representation for a single token, and add it to
+// the line map. Takes care to render special characters separately.
+function buildToken(builder, text, style, startStyle, endStyle, title, css) {
+ if (!text) { return }
+ var displayText = builder.splitSpaces ? splitSpaces(text, builder.trailingSpace) : text;
+ var special = builder.cm.state.specialChars, mustWrap = false;
+ var content;
+ if (!special.test(text)) {
+ builder.col += text.length;
+ content = document.createTextNode(displayText);
+ builder.map.push(builder.pos, builder.pos + text.length, content);
+ if (ie && ie_version < 9) { mustWrap = true; }
+ builder.pos += text.length;
+ } else {
+ content = document.createDocumentFragment();
+ var pos = 0;
+ while (true) {
+ special.lastIndex = pos;
+ var m = special.exec(text);
+ var skipped = m ? m.index - pos : text.length - pos;
+ if (skipped) {
+ var txt = document.createTextNode(displayText.slice(pos, pos + skipped));
+ if (ie && ie_version < 9) { content.appendChild(elt("span", [txt])); }
+ else { content.appendChild(txt); }
+ builder.map.push(builder.pos, builder.pos + skipped, txt);
+ builder.col += skipped;
+ builder.pos += skipped;
+ }
+ if (!m) { break }
+ pos += skipped + 1;
+ var txt$1 = (void 0);
+ if (m[0] == "\t") {
+ var tabSize = builder.cm.options.tabSize, tabWidth = tabSize - builder.col % tabSize;
+ txt$1 = content.appendChild(elt("span", spaceStr(tabWidth), "cm-tab"));
+ txt$1.setAttribute("role", "presentation");
+ txt$1.setAttribute("cm-text", "\t");
+ builder.col += tabWidth;
+ } else if (m[0] == "\r" || m[0] == "\n") {
+ txt$1 = content.appendChild(elt("span", m[0] == "\r" ? "\u240d" : "\u2424", "cm-invalidchar"));
+ txt$1.setAttribute("cm-text", m[0]);
+ builder.col += 1;
+ } else {
+ txt$1 = builder.cm.options.specialCharPlaceholder(m[0]);
+ txt$1.setAttribute("cm-text", m[0]);
+ if (ie && ie_version < 9) { content.appendChild(elt("span", [txt$1])); }
+ else { content.appendChild(txt$1); }
+ builder.col += 1;
+ }
+ builder.map.push(builder.pos, builder.pos + 1, txt$1);
+ builder.pos++;
+ }
+ }
+ builder.trailingSpace = displayText.charCodeAt(text.length - 1) == 32;
+ if (style || startStyle || endStyle || mustWrap || css) {
+ var fullStyle = style || "";
+ if (startStyle) { fullStyle += startStyle; }
+ if (endStyle) { fullStyle += endStyle; }
+ var token = elt("span", [content], fullStyle, css);
+ if (title) { token.title = title; }
+ return builder.content.appendChild(token)
+ }
+ builder.content.appendChild(content);
+}
+
+function splitSpaces(text, trailingBefore) {
+ if (text.length > 1 && !/ /.test(text)) { return text }
+ var spaceBefore = trailingBefore, result = "";
+ for (var i = 0; i < text.length; i++) {
+ var ch = text.charAt(i);
+ if (ch == " " && spaceBefore && (i == text.length - 1 || text.charCodeAt(i + 1) == 32))
+ { ch = "\u00a0"; }
+ result += ch;
+ spaceBefore = ch == " ";
+ }
+ return result
+}
+
+// Work around nonsense dimensions being reported for stretches of
+// right-to-left text.
+function buildTokenBadBidi(inner, order) {
+ return function (builder, text, style, startStyle, endStyle, title, css) {
+ style = style ? style + " cm-force-border" : "cm-force-border";
+ var start = builder.pos, end = start + text.length;
+ for (;;) {
+ // Find the part that overlaps with the start of this text
+ var part = (void 0);
+ for (var i = 0; i < order.length; i++) {
+ part = order[i];
+ if (part.to > start && part.from <= start) { break }
+ }
+ if (part.to >= end) { return inner(builder, text, style, startStyle, endStyle, title, css) }
+ inner(builder, text.slice(0, part.to - start), style, startStyle, null, title, css);
+ startStyle = null;
+ text = text.slice(part.to - start);
+ start = part.to;
+ }
+ }
+}
+
+function buildCollapsedSpan(builder, size, marker, ignoreWidget) {
+ var widget = !ignoreWidget && marker.widgetNode;
+ if (widget) { builder.map.push(builder.pos, builder.pos + size, widget); }
+ if (!ignoreWidget && builder.cm.display.input.needsContentAttribute) {
+ if (!widget)
+ { widget = builder.content.appendChild(document.createElement("span")); }
+ widget.setAttribute("cm-marker", marker.id);
+ }
+ if (widget) {
+ builder.cm.display.input.setUneditable(widget);
+ builder.content.appendChild(widget);
+ }
+ builder.pos += size;
+ builder.trailingSpace = false;
+}
+
+// Outputs a number of spans to make up a line, taking highlighting
+// and marked text into account.
+function insertLineContent(line, builder, styles) {
+ var spans = line.markedSpans, allText = line.text, at = 0;
+ if (!spans) {
+ for (var i$1 = 1; i$1 < styles.length; i$1+=2)
+ { builder.addToken(builder, allText.slice(at, at = styles[i$1]), interpretTokenStyle(styles[i$1+1], builder.cm.options)); }
+ return
+ }
+
+ var len = allText.length, pos = 0, i = 1, text = "", style, css;
+ var nextChange = 0, spanStyle, spanEndStyle, spanStartStyle, title, collapsed;
+ for (;;) {
+ if (nextChange == pos) { // Update current marker set
+ spanStyle = spanEndStyle = spanStartStyle = title = css = "";
+ collapsed = null; nextChange = Infinity;
+ var foundBookmarks = [], endStyles = (void 0);
+ for (var j = 0; j < spans.length; ++j) {
+ var sp = spans[j], m = sp.marker;
+ if (m.type == "bookmark" && sp.from == pos && m.widgetNode) {
+ foundBookmarks.push(m);
+ } else if (sp.from <= pos && (sp.to == null || sp.to > pos || m.collapsed && sp.to == pos && sp.from == pos)) {
+ if (sp.to != null && sp.to != pos && nextChange > sp.to) {
+ nextChange = sp.to;
+ spanEndStyle = "";
+ }
+ if (m.className) { spanStyle += " " + m.className; }
+ if (m.css) { css = (css ? css + ";" : "") + m.css; }
+ if (m.startStyle && sp.from == pos) { spanStartStyle += " " + m.startStyle; }
+ if (m.endStyle && sp.to == nextChange) { (endStyles || (endStyles = [])).push(m.endStyle, sp.to); }
+ if (m.title && !title) { title = m.title; }
+ if (m.collapsed && (!collapsed || compareCollapsedMarkers(collapsed.marker, m) < 0))
+ { collapsed = sp; }
+ } else if (sp.from > pos && nextChange > sp.from) {
+ nextChange = sp.from;
+ }
+ }
+ if (endStyles) { for (var j$1 = 0; j$1 < endStyles.length; j$1 += 2)
+ { if (endStyles[j$1 + 1] == nextChange) { spanEndStyle += " " + endStyles[j$1]; } } }
+
+ if (!collapsed || collapsed.from == pos) { for (var j$2 = 0; j$2 < foundBookmarks.length; ++j$2)
+ { buildCollapsedSpan(builder, 0, foundBookmarks[j$2]); } }
+ if (collapsed && (collapsed.from || 0) == pos) {
+ buildCollapsedSpan(builder, (collapsed.to == null ? len + 1 : collapsed.to) - pos,
+ collapsed.marker, collapsed.from == null);
+ if (collapsed.to == null) { return }
+ if (collapsed.to == pos) { collapsed = false; }
+ }
+ }
+ if (pos >= len) { break }
+
+ var upto = Math.min(len, nextChange);
+ while (true) {
+ if (text) {
+ var end = pos + text.length;
+ if (!collapsed) {
+ var tokenText = end > upto ? text.slice(0, upto - pos) : text;
+ builder.addToken(builder, tokenText, style ? style + spanStyle : spanStyle,
+ spanStartStyle, pos + tokenText.length == nextChange ? spanEndStyle : "", title, css);
+ }
+ if (end >= upto) {text = text.slice(upto - pos); pos = upto; break}
+ pos = end;
+ spanStartStyle = "";
+ }
+ text = allText.slice(at, at = styles[i++]);
+ style = interpretTokenStyle(styles[i++], builder.cm.options);
+ }
+ }
+}
+
+
+// These objects are used to represent the visible (currently drawn)
+// part of the document. A LineView may correspond to multiple
+// logical lines, if those are connected by collapsed ranges.
+function LineView(doc, line, lineN) {
+ // The starting line
+ this.line = line;
+ // Continuing lines, if any
+ this.rest = visualLineContinued(line);
+ // Number of logical lines in this visual line
+ this.size = this.rest ? lineNo(lst(this.rest)) - lineN + 1 : 1;
+ this.node = this.text = null;
+ this.hidden = lineIsHidden(doc, line);
+}
+
+// Create a range of LineView objects for the given lines.
+function buildViewArray(cm, from, to) {
+ var array = [], nextPos;
+ for (var pos = from; pos < to; pos = nextPos) {
+ var view = new LineView(cm.doc, getLine(cm.doc, pos), pos);
+ nextPos = pos + view.size;
+ array.push(view);
+ }
+ return array
+}
+
+var operationGroup = null;
+
+function pushOperation(op) {
+ if (operationGroup) {
+ operationGroup.ops.push(op);
+ } else {
+ op.ownsGroup = operationGroup = {
+ ops: [op],
+ delayedCallbacks: []
+ };
+ }
+}
+
+function fireCallbacksForOps(group) {
+ // Calls delayed callbacks and cursorActivity handlers until no
+ // new ones appear
+ var callbacks = group.delayedCallbacks, i = 0;
+ do {
+ for (; i < callbacks.length; i++)
+ { callbacks[i].call(null); }
+ for (var j = 0; j < group.ops.length; j++) {
+ var op = group.ops[j];
+ if (op.cursorActivityHandlers)
+ { while (op.cursorActivityCalled < op.cursorActivityHandlers.length)
+ { op.cursorActivityHandlers[op.cursorActivityCalled++].call(null, op.cm); } }
+ }
+ } while (i < callbacks.length)
+}
+
+function finishOperation(op, endCb) {
+ var group = op.ownsGroup;
+ if (!group) { return }
+
+ try { fireCallbacksForOps(group); }
+ finally {
+ operationGroup = null;
+ endCb(group);
+ }
+}
+
+var orphanDelayedCallbacks = null;
+
+// Often, we want to signal events at a point where we are in the
+// middle of some work, but don't want the handler to start calling
+// other methods on the editor, which might be in an inconsistent
+// state or simply not expect any other events to happen.
+// signalLater looks whether there are any handlers, and schedules
+// them to be executed when the last operation ends, or, if no
+// operation is active, when a timeout fires.
+function signalLater(emitter, type /*, values...*/) {
+ var arr = getHandlers(emitter, type);
+ if (!arr.length) { return }
+ var args = Array.prototype.slice.call(arguments, 2), list;
+ if (operationGroup) {
+ list = operationGroup.delayedCallbacks;
+ } else if (orphanDelayedCallbacks) {
+ list = orphanDelayedCallbacks;
+ } else {
+ list = orphanDelayedCallbacks = [];
+ setTimeout(fireOrphanDelayed, 0);
+ }
+ var loop = function ( i ) {
+ list.push(function () { return arr[i].apply(null, args); });
+ };
+
+ for (var i = 0; i < arr.length; ++i)
+ loop( i );
+}
+
+function fireOrphanDelayed() {
+ var delayed = orphanDelayedCallbacks;
+ orphanDelayedCallbacks = null;
+ for (var i = 0; i < delayed.length; ++i) { delayed[i](); }
+}
+
+// When an aspect of a line changes, a string is added to
+// lineView.changes. This updates the relevant part of the line's
+// DOM structure.
+function updateLineForChanges(cm, lineView, lineN, dims) {
+ for (var j = 0; j < lineView.changes.length; j++) {
+ var type = lineView.changes[j];
+ if (type == "text") { updateLineText(cm, lineView); }
+ else if (type == "gutter") { updateLineGutter(cm, lineView, lineN, dims); }
+ else if (type == "class") { updateLineClasses(cm, lineView); }
+ else if (type == "widget") { updateLineWidgets(cm, lineView, dims); }
+ }
+ lineView.changes = null;
+}
+
+// Lines with gutter elements, widgets or a background class need to
+// be wrapped, and have the extra elements added to the wrapper div
+function ensureLineWrapped(lineView) {
+ if (lineView.node == lineView.text) {
+ lineView.node = elt("div", null, null, "position: relative");
+ if (lineView.text.parentNode)
+ { lineView.text.parentNode.replaceChild(lineView.node, lineView.text); }
+ lineView.node.appendChild(lineView.text);
+ if (ie && ie_version < 8) { lineView.node.style.zIndex = 2; }
+ }
+ return lineView.node
+}
+
+function updateLineBackground(cm, lineView) {
+ var cls = lineView.bgClass ? lineView.bgClass + " " + (lineView.line.bgClass || "") : lineView.line.bgClass;
+ if (cls) { cls += " CodeMirror-linebackground"; }
+ if (lineView.background) {
+ if (cls) { lineView.background.className = cls; }
+ else { lineView.background.parentNode.removeChild(lineView.background); lineView.background = null; }
+ } else if (cls) {
+ var wrap = ensureLineWrapped(lineView);
+ lineView.background = wrap.insertBefore(elt("div", null, cls), wrap.firstChild);
+ cm.display.input.setUneditable(lineView.background);
+ }
+}
+
+// Wrapper around buildLineContent which will reuse the structure
+// in display.externalMeasured when possible.
+function getLineContent(cm, lineView) {
+ var ext = cm.display.externalMeasured;
+ if (ext && ext.line == lineView.line) {
+ cm.display.externalMeasured = null;
+ lineView.measure = ext.measure;
+ return ext.built
+ }
+ return buildLineContent(cm, lineView)
+}
+
+// Redraw the line's text. Interacts with the background and text
+// classes because the mode may output tokens that influence these
+// classes.
+function updateLineText(cm, lineView) {
+ var cls = lineView.text.className;
+ var built = getLineContent(cm, lineView);
+ if (lineView.text == lineView.node) { lineView.node = built.pre; }
+ lineView.text.parentNode.replaceChild(built.pre, lineView.text);
+ lineView.text = built.pre;
+ if (built.bgClass != lineView.bgClass || built.textClass != lineView.textClass) {
+ lineView.bgClass = built.bgClass;
+ lineView.textClass = built.textClass;
+ updateLineClasses(cm, lineView);
+ } else if (cls) {
+ lineView.text.className = cls;
+ }
+}
+
+function updateLineClasses(cm, lineView) {
+ updateLineBackground(cm, lineView);
+ if (lineView.line.wrapClass)
+ { ensureLineWrapped(lineView).className = lineView.line.wrapClass; }
+ else if (lineView.node != lineView.text)
+ { lineView.node.className = ""; }
+ var textClass = lineView.textClass ? lineView.textClass + " " + (lineView.line.textClass || "") : lineView.line.textClass;
+ lineView.text.className = textClass || "";
+}
+
+function updateLineGutter(cm, lineView, lineN, dims) {
+ if (lineView.gutter) {
+ lineView.node.removeChild(lineView.gutter);
+ lineView.gutter = null;
+ }
+ if (lineView.gutterBackground) {
+ lineView.node.removeChild(lineView.gutterBackground);
+ lineView.gutterBackground = null;
+ }
+ if (lineView.line.gutterClass) {
+ var wrap = ensureLineWrapped(lineView);
+ lineView.gutterBackground = elt("div", null, "CodeMirror-gutter-background " + lineView.line.gutterClass,
+ ("left: " + (cm.options.fixedGutter ? dims.fixedPos : -dims.gutterTotalWidth) + "px; width: " + (dims.gutterTotalWidth) + "px"));
+ cm.display.input.setUneditable(lineView.gutterBackground);
+ wrap.insertBefore(lineView.gutterBackground, lineView.text);
+ }
+ var markers = lineView.line.gutterMarkers;
+ if (cm.options.lineNumbers || markers) {
+ var wrap$1 = ensureLineWrapped(lineView);
+ var gutterWrap = lineView.gutter = elt("div", null, "CodeMirror-gutter-wrapper", ("left: " + (cm.options.fixedGutter ? dims.fixedPos : -dims.gutterTotalWidth) + "px"));
+ cm.display.input.setUneditable(gutterWrap);
+ wrap$1.insertBefore(gutterWrap, lineView.text);
+ if (lineView.line.gutterClass)
+ { gutterWrap.className += " " + lineView.line.gutterClass; }
+ if (cm.options.lineNumbers && (!markers || !markers["CodeMirror-linenumbers"]))
+ { lineView.lineNumber = gutterWrap.appendChild(
+ elt("div", lineNumberFor(cm.options, lineN),
+ "CodeMirror-linenumber CodeMirror-gutter-elt",
+ ("left: " + (dims.gutterLeft["CodeMirror-linenumbers"]) + "px; width: " + (cm.display.lineNumInnerWidth) + "px"))); }
+ if (markers) { for (var k = 0; k < cm.options.gutters.length; ++k) {
+ var id = cm.options.gutters[k], found = markers.hasOwnProperty(id) && markers[id];
+ if (found)
+ { gutterWrap.appendChild(elt("div", [found], "CodeMirror-gutter-elt",
+ ("left: " + (dims.gutterLeft[id]) + "px; width: " + (dims.gutterWidth[id]) + "px"))); }
+ } }
+ }
+}
+
+function updateLineWidgets(cm, lineView, dims) {
+ if (lineView.alignable) { lineView.alignable = null; }
+ for (var node = lineView.node.firstChild, next = (void 0); node; node = next) {
+ next = node.nextSibling;
+ if (node.className == "CodeMirror-linewidget")
+ { lineView.node.removeChild(node); }
+ }
+ insertLineWidgets(cm, lineView, dims);
+}
+
+// Build a line's DOM representation from scratch
+function buildLineElement(cm, lineView, lineN, dims) {
+ var built = getLineContent(cm, lineView);
+ lineView.text = lineView.node = built.pre;
+ if (built.bgClass) { lineView.bgClass = built.bgClass; }
+ if (built.textClass) { lineView.textClass = built.textClass; }
+
+ updateLineClasses(cm, lineView);
+ updateLineGutter(cm, lineView, lineN, dims);
+ insertLineWidgets(cm, lineView, dims);
+ return lineView.node
+}
+
+// A lineView may contain multiple logical lines (when merged by
+// collapsed spans). The widgets for all of them need to be drawn.
+function insertLineWidgets(cm, lineView, dims) {
+ insertLineWidgetsFor(cm, lineView.line, lineView, dims, true);
+ if (lineView.rest) { for (var i = 0; i < lineView.rest.length; i++)
+ { insertLineWidgetsFor(cm, lineView.rest[i], lineView, dims, false); } }
+}
+
+function insertLineWidgetsFor(cm, line, lineView, dims, allowAbove) {
+ if (!line.widgets) { return }
+ var wrap = ensureLineWrapped(lineView);
+ for (var i = 0, ws = line.widgets; i < ws.length; ++i) {
+ var widget = ws[i], node = elt("div", [widget.node], "CodeMirror-linewidget");
+ if (!widget.handleMouseEvents) { node.setAttribute("cm-ignore-events", "true"); }
+ positionLineWidget(widget, node, lineView, dims);
+ cm.display.input.setUneditable(node);
+ if (allowAbove && widget.above)
+ { wrap.insertBefore(node, lineView.gutter || lineView.text); }
+ else
+ { wrap.appendChild(node); }
+ signalLater(widget, "redraw");
+ }
+}
+
+function positionLineWidget(widget, node, lineView, dims) {
+ if (widget.noHScroll) {
+ (lineView.alignable || (lineView.alignable = [])).push(node);
+ var width = dims.wrapperWidth;
+ node.style.left = dims.fixedPos + "px";
+ if (!widget.coverGutter) {
+ width -= dims.gutterTotalWidth;
+ node.style.paddingLeft = dims.gutterTotalWidth + "px";
+ }
+ node.style.width = width + "px";
+ }
+ if (widget.coverGutter) {
+ node.style.zIndex = 5;
+ node.style.position = "relative";
+ if (!widget.noHScroll) { node.style.marginLeft = -dims.gutterTotalWidth + "px"; }
+ }
+}
+
+function widgetHeight(widget) {
+ if (widget.height != null) { return widget.height }
+ var cm = widget.doc.cm;
+ if (!cm) { return 0 }
+ if (!contains(document.body, widget.node)) {
+ var parentStyle = "position: relative;";
+ if (widget.coverGutter)
+ { parentStyle += "margin-left: -" + cm.display.gutters.offsetWidth + "px;"; }
+ if (widget.noHScroll)
+ { parentStyle += "width: " + cm.display.wrapper.clientWidth + "px;"; }
+ removeChildrenAndAdd(cm.display.measure, elt("div", [widget.node], null, parentStyle));
+ }
+ return widget.height = widget.node.parentNode.offsetHeight
+}
+
+// Return true when the given mouse event happened in a widget
+function eventInWidget(display, e) {
+ for (var n = e_target(e); n != display.wrapper; n = n.parentNode) {
+ if (!n || (n.nodeType == 1 && n.getAttribute("cm-ignore-events") == "true") ||
+ (n.parentNode == display.sizer && n != display.mover))
+ { return true }
+ }
+}
+
+// POSITION MEASUREMENT
+
+function paddingTop(display) {return display.lineSpace.offsetTop}
+function paddingVert(display) {return display.mover.offsetHeight - display.lineSpace.offsetHeight}
+function paddingH(display) {
+ if (display.cachedPaddingH) { return display.cachedPaddingH }
+ var e = removeChildrenAndAdd(display.measure, elt("pre", "x"));
+ var style = window.getComputedStyle ? window.getComputedStyle(e) : e.currentStyle;
+ var data = {left: parseInt(style.paddingLeft), right: parseInt(style.paddingRight)};
+ if (!isNaN(data.left) && !isNaN(data.right)) { display.cachedPaddingH = data; }
+ return data
+}
+
+function scrollGap(cm) { return scrollerGap - cm.display.nativeBarWidth }
+function displayWidth(cm) {
+ return cm.display.scroller.clientWidth - scrollGap(cm) - cm.display.barWidth
+}
+function displayHeight(cm) {
+ return cm.display.scroller.clientHeight - scrollGap(cm) - cm.display.barHeight
+}
+
+// Ensure the lineView.wrapping.heights array is populated. This is
+// an array of bottom offsets for the lines that make up a drawn
+// line. When lineWrapping is on, there might be more than one
+// height.
+function ensureLineHeights(cm, lineView, rect) {
+ var wrapping = cm.options.lineWrapping;
+ var curWidth = wrapping && displayWidth(cm);
+ if (!lineView.measure.heights || wrapping && lineView.measure.width != curWidth) {
+ var heights = lineView.measure.heights = [];
+ if (wrapping) {
+ lineView.measure.width = curWidth;
+ var rects = lineView.text.firstChild.getClientRects();
+ for (var i = 0; i < rects.length - 1; i++) {
+ var cur = rects[i], next = rects[i + 1];
+ if (Math.abs(cur.bottom - next.bottom) > 2)
+ { heights.push((cur.bottom + next.top) / 2 - rect.top); }
+ }
+ }
+ heights.push(rect.bottom - rect.top);
+ }
+}
+
+// Find a line map (mapping character offsets to text nodes) and a
+// measurement cache for the given line number. (A line view might
+// contain multiple lines when collapsed ranges are present.)
+function mapFromLineView(lineView, line, lineN) {
+ if (lineView.line == line)
+ { return {map: lineView.measure.map, cache: lineView.measure.cache} }
+ for (var i = 0; i < lineView.rest.length; i++)
+ { if (lineView.rest[i] == line)
+ { return {map: lineView.measure.maps[i], cache: lineView.measure.caches[i]} } }
+ for (var i$1 = 0; i$1 < lineView.rest.length; i$1++)
+ { if (lineNo(lineView.rest[i$1]) > lineN)
+ { return {map: lineView.measure.maps[i$1], cache: lineView.measure.caches[i$1], before: true} } }
+}
+
+// Render a line into the hidden node display.externalMeasured. Used
+// when measurement is needed for a line that's not in the viewport.
+function updateExternalMeasurement(cm, line) {
+ line = visualLine(line);
+ var lineN = lineNo(line);
+ var view = cm.display.externalMeasured = new LineView(cm.doc, line, lineN);
+ view.lineN = lineN;
+ var built = view.built = buildLineContent(cm, view);
+ view.text = built.pre;
+ removeChildrenAndAdd(cm.display.lineMeasure, built.pre);
+ return view
+}
+
+// Get a {top, bottom, left, right} box (in line-local coordinates)
+// for a given character.
+function measureChar(cm, line, ch, bias) {
+ return measureCharPrepared(cm, prepareMeasureForLine(cm, line), ch, bias)
+}
+
+// Find a line view that corresponds to the given line number.
+function findViewForLine(cm, lineN) {
+ if (lineN >= cm.display.viewFrom && lineN < cm.display.viewTo)
+ { return cm.display.view[findViewIndex(cm, lineN)] }
+ var ext = cm.display.externalMeasured;
+ if (ext && lineN >= ext.lineN && lineN < ext.lineN + ext.size)
+ { return ext }
+}
+
+// Measurement can be split in two steps, the set-up work that
+// applies to the whole line, and the measurement of the actual
+// character. Functions like coordsChar, that need to do a lot of
+// measurements in a row, can thus ensure that the set-up work is
+// only done once.
+function prepareMeasureForLine(cm, line) {
+ var lineN = lineNo(line);
+ var view = findViewForLine(cm, lineN);
+ if (view && !view.text) {
+ view = null;
+ } else if (view && view.changes) {
+ updateLineForChanges(cm, view, lineN, getDimensions(cm));
+ cm.curOp.forceUpdate = true;
+ }
+ if (!view)
+ { view = updateExternalMeasurement(cm, line); }
+
+ var info = mapFromLineView(view, line, lineN);
+ return {
+ line: line, view: view, rect: null,
+ map: info.map, cache: info.cache, before: info.before,
+ hasHeights: false
+ }
+}
+
+// Given a prepared measurement object, measures the position of an
+// actual character (or fetches it from the cache).
+function measureCharPrepared(cm, prepared, ch, bias, varHeight) {
+ if (prepared.before) { ch = -1; }
+ var key = ch + (bias || ""), found;
+ if (prepared.cache.hasOwnProperty(key)) {
+ found = prepared.cache[key];
+ } else {
+ if (!prepared.rect)
+ { prepared.rect = prepared.view.text.getBoundingClientRect(); }
+ if (!prepared.hasHeights) {
+ ensureLineHeights(cm, prepared.view, prepared.rect);
+ prepared.hasHeights = true;
+ }
+ found = measureCharInner(cm, prepared, ch, bias);
+ if (!found.bogus) { prepared.cache[key] = found; }
+ }
+ return {left: found.left, right: found.right,
+ top: varHeight ? found.rtop : found.top,
+ bottom: varHeight ? found.rbottom : found.bottom}
+}
+
+var nullRect = {left: 0, right: 0, top: 0, bottom: 0};
+
+function nodeAndOffsetInLineMap(map$$1, ch, bias) {
+ var node, start, end, collapse, mStart, mEnd;
+ // First, search the line map for the text node corresponding to,
+ // or closest to, the target character.
+ for (var i = 0; i < map$$1.length; i += 3) {
+ mStart = map$$1[i];
+ mEnd = map$$1[i + 1];
+ if (ch < mStart) {
+ start = 0; end = 1;
+ collapse = "left";
+ } else if (ch < mEnd) {
+ start = ch - mStart;
+ end = start + 1;
+ } else if (i == map$$1.length - 3 || ch == mEnd && map$$1[i + 3] > ch) {
+ end = mEnd - mStart;
+ start = end - 1;
+ if (ch >= mEnd) { collapse = "right"; }
+ }
+ if (start != null) {
+ node = map$$1[i + 2];
+ if (mStart == mEnd && bias == (node.insertLeft ? "left" : "right"))
+ { collapse = bias; }
+ if (bias == "left" && start == 0)
+ { while (i && map$$1[i - 2] == map$$1[i - 3] && map$$1[i - 1].insertLeft) {
+ node = map$$1[(i -= 3) + 2];
+ collapse = "left";
+ } }
+ if (bias == "right" && start == mEnd - mStart)
+ { while (i < map$$1.length - 3 && map$$1[i + 3] == map$$1[i + 4] && !map$$1[i + 5].insertLeft) {
+ node = map$$1[(i += 3) + 2];
+ collapse = "right";
+ } }
+ break
+ }
+ }
+ return {node: node, start: start, end: end, collapse: collapse, coverStart: mStart, coverEnd: mEnd}
+}
+
+function getUsefulRect(rects, bias) {
+ var rect = nullRect;
+ if (bias == "left") { for (var i = 0; i < rects.length; i++) {
+ if ((rect = rects[i]).left != rect.right) { break }
+ } } else { for (var i$1 = rects.length - 1; i$1 >= 0; i$1--) {
+ if ((rect = rects[i$1]).left != rect.right) { break }
+ } }
+ return rect
+}
+
+function measureCharInner(cm, prepared, ch, bias) {
+ var place = nodeAndOffsetInLineMap(prepared.map, ch, bias);
+ var node = place.node, start = place.start, end = place.end, collapse = place.collapse;
+
+ var rect;
+ if (node.nodeType == 3) { // If it is a text node, use a range to retrieve the coordinates.
+ for (var i$1 = 0; i$1 < 4; i$1++) { // Retry a maximum of 4 times when nonsense rectangles are returned
+ while (start && isExtendingChar(prepared.line.text.charAt(place.coverStart + start))) { --start; }
+ while (place.coverStart + end < place.coverEnd && isExtendingChar(prepared.line.text.charAt(place.coverStart + end))) { ++end; }
+ if (ie && ie_version < 9 && start == 0 && end == place.coverEnd - place.coverStart)
+ { rect = node.parentNode.getBoundingClientRect(); }
+ else
+ { rect = getUsefulRect(range(node, start, end).getClientRects(), bias); }
+ if (rect.left || rect.right || start == 0) { break }
+ end = start;
+ start = start - 1;
+ collapse = "right";
+ }
+ if (ie && ie_version < 11) { rect = maybeUpdateRectForZooming(cm.display.measure, rect); }
+ } else { // If it is a widget, simply get the box for the whole widget.
+ if (start > 0) { collapse = bias = "right"; }
+ var rects;
+ if (cm.options.lineWrapping && (rects = node.getClientRects()).length > 1)
+ { rect = rects[bias == "right" ? rects.length - 1 : 0]; }
+ else
+ { rect = node.getBoundingClientRect(); }
+ }
+ if (ie && ie_version < 9 && !start && (!rect || !rect.left && !rect.right)) {
+ var rSpan = node.parentNode.getClientRects()[0];
+ if (rSpan)
+ { rect = {left: rSpan.left, right: rSpan.left + charWidth(cm.display), top: rSpan.top, bottom: rSpan.bottom}; }
+ else
+ { rect = nullRect; }
+ }
+
+ var rtop = rect.top - prepared.rect.top, rbot = rect.bottom - prepared.rect.top;
+ var mid = (rtop + rbot) / 2;
+ var heights = prepared.view.measure.heights;
+ var i = 0;
+ for (; i < heights.length - 1; i++)
+ { if (mid < heights[i]) { break } }
+ var top = i ? heights[i - 1] : 0, bot = heights[i];
+ var result = {left: (collapse == "right" ? rect.right : rect.left) - prepared.rect.left,
+ right: (collapse == "left" ? rect.left : rect.right) - prepared.rect.left,
+ top: top, bottom: bot};
+ if (!rect.left && !rect.right) { result.bogus = true; }
+ if (!cm.options.singleCursorHeightPerLine) { result.rtop = rtop; result.rbottom = rbot; }
+
+ return result
+}
+
+// Work around problem with bounding client rects on ranges being
+// returned incorrectly when zoomed on IE10 and below.
+function maybeUpdateRectForZooming(measure, rect) {
+ if (!window.screen || screen.logicalXDPI == null ||
+ screen.logicalXDPI == screen.deviceXDPI || !hasBadZoomedRects(measure))
+ { return rect }
+ var scaleX = screen.logicalXDPI / screen.deviceXDPI;
+ var scaleY = screen.logicalYDPI / screen.deviceYDPI;
+ return {left: rect.left * scaleX, right: rect.right * scaleX,
+ top: rect.top * scaleY, bottom: rect.bottom * scaleY}
+}
+
+function clearLineMeasurementCacheFor(lineView) {
+ if (lineView.measure) {
+ lineView.measure.cache = {};
+ lineView.measure.heights = null;
+ if (lineView.rest) { for (var i = 0; i < lineView.rest.length; i++)
+ { lineView.measure.caches[i] = {}; } }
+ }
+}
+
+function clearLineMeasurementCache(cm) {
+ cm.display.externalMeasure = null;
+ removeChildren(cm.display.lineMeasure);
+ for (var i = 0; i < cm.display.view.length; i++)
+ { clearLineMeasurementCacheFor(cm.display.view[i]); }
+}
+
+function clearCaches(cm) {
+ clearLineMeasurementCache(cm);
+ cm.display.cachedCharWidth = cm.display.cachedTextHeight = cm.display.cachedPaddingH = null;
+ if (!cm.options.lineWrapping) { cm.display.maxLineChanged = true; }
+ cm.display.lineNumChars = null;
+}
+
+function pageScrollX() {
+ // Work around https://bugs.chromium.org/p/chromium/issues/detail?id=489206
+ // which causes page_Offset and bounding client rects to use
+ // different reference viewports and invalidate our calculations.
+ if (chrome && android) { return -(document.body.getBoundingClientRect().left - parseInt(getComputedStyle(document.body).marginLeft)) }
+ return window.pageXOffset || (document.documentElement || document.body).scrollLeft
+}
+function pageScrollY() {
+ if (chrome && android) { return -(document.body.getBoundingClientRect().top - parseInt(getComputedStyle(document.body).marginTop)) }
+ return window.pageYOffset || (document.documentElement || document.body).scrollTop
+}
+
+function widgetTopHeight(lineObj) {
+ var height = 0;
+ if (lineObj.widgets) { for (var i = 0; i < lineObj.widgets.length; ++i) { if (lineObj.widgets[i].above)
+ { height += widgetHeight(lineObj.widgets[i]); } } }
+ return height
+}
+
+// Converts a {top, bottom, left, right} box from line-local
+// coordinates into another coordinate system. Context may be one of
+// "line", "div" (display.lineDiv), "local"./null (editor), "window",
+// or "page".
+function intoCoordSystem(cm, lineObj, rect, context, includeWidgets) {
+ if (!includeWidgets) {
+ var height = widgetTopHeight(lineObj);
+ rect.top += height; rect.bottom += height;
+ }
+ if (context == "line") { return rect }
+ if (!context) { context = "local"; }
+ var yOff = heightAtLine(lineObj);
+ if (context == "local") { yOff += paddingTop(cm.display); }
+ else { yOff -= cm.display.viewOffset; }
+ if (context == "page" || context == "window") {
+ var lOff = cm.display.lineSpace.getBoundingClientRect();
+ yOff += lOff.top + (context == "window" ? 0 : pageScrollY());
+ var xOff = lOff.left + (context == "window" ? 0 : pageScrollX());
+ rect.left += xOff; rect.right += xOff;
+ }
+ rect.top += yOff; rect.bottom += yOff;
+ return rect
+}
+
+// Coverts a box from "div" coords to another coordinate system.
+// Context may be "window", "page", "div", or "local"./null.
+function fromCoordSystem(cm, coords, context) {
+ if (context == "div") { return coords }
+ var left = coords.left, top = coords.top;
+ // First move into "page" coordinate system
+ if (context == "page") {
+ left -= pageScrollX();
+ top -= pageScrollY();
+ } else if (context == "local" || !context) {
+ var localBox = cm.display.sizer.getBoundingClientRect();
+ left += localBox.left;
+ top += localBox.top;
+ }
+
+ var lineSpaceBox = cm.display.lineSpace.getBoundingClientRect();
+ return {left: left - lineSpaceBox.left, top: top - lineSpaceBox.top}
+}
+
+function charCoords(cm, pos, context, lineObj, bias) {
+ if (!lineObj) { lineObj = getLine(cm.doc, pos.line); }
+ return intoCoordSystem(cm, lineObj, measureChar(cm, lineObj, pos.ch, bias), context)
+}
+
+// Returns a box for a given cursor position, which may have an
+// 'other' property containing the position of the secondary cursor
+// on a bidi boundary.
+// A cursor Pos(line, char, "before") is on the same visual line as `char - 1`
+// and after `char - 1` in writing order of `char - 1`
+// A cursor Pos(line, char, "after") is on the same visual line as `char`
+// and before `char` in writing order of `char`
+// Examples (upper-case letters are RTL, lower-case are LTR):
+// Pos(0, 1, ...)
+// before after
+// ab a|b a|b
+// aB a|B aB|
+// Ab |Ab A|b
+// AB B|A B|A
+// Every position after the last character on a line is considered to stick
+// to the last character on the line.
+function cursorCoords(cm, pos, context, lineObj, preparedMeasure, varHeight) {
+ lineObj = lineObj || getLine(cm.doc, pos.line);
+ if (!preparedMeasure) { preparedMeasure = prepareMeasureForLine(cm, lineObj); }
+ function get(ch, right) {
+ var m = measureCharPrepared(cm, preparedMeasure, ch, right ? "right" : "left", varHeight);
+ if (right) { m.left = m.right; } else { m.right = m.left; }
+ return intoCoordSystem(cm, lineObj, m, context)
+ }
+ var order = getOrder(lineObj, cm.doc.direction), ch = pos.ch, sticky = pos.sticky;
+ if (ch >= lineObj.text.length) {
+ ch = lineObj.text.length;
+ sticky = "before";
+ } else if (ch <= 0) {
+ ch = 0;
+ sticky = "after";
+ }
+ if (!order) { return get(sticky == "before" ? ch - 1 : ch, sticky == "before") }
+
+ function getBidi(ch, partPos, invert) {
+ var part = order[partPos], right = part.level == 1;
+ return get(invert ? ch - 1 : ch, right != invert)
+ }
+ var partPos = getBidiPartAt(order, ch, sticky);
+ var other = bidiOther;
+ var val = getBidi(ch, partPos, sticky == "before");
+ if (other != null) { val.other = getBidi(ch, other, sticky != "before"); }
+ return val
+}
+
+// Used to cheaply estimate the coordinates for a position. Used for
+// intermediate scroll updates.
+function estimateCoords(cm, pos) {
+ var left = 0;
+ pos = clipPos(cm.doc, pos);
+ if (!cm.options.lineWrapping) { left = charWidth(cm.display) * pos.ch; }
+ var lineObj = getLine(cm.doc, pos.line);
+ var top = heightAtLine(lineObj) + paddingTop(cm.display);
+ return {left: left, right: left, top: top, bottom: top + lineObj.height}
+}
+
+// Positions returned by coordsChar contain some extra information.
+// xRel is the relative x position of the input coordinates compared
+// to the found position (so xRel > 0 means the coordinates are to
+// the right of the character position, for example). When outside
+// is true, that means the coordinates lie outside the line's
+// vertical range.
+function PosWithInfo(line, ch, sticky, outside, xRel) {
+ var pos = Pos(line, ch, sticky);
+ pos.xRel = xRel;
+ if (outside) { pos.outside = true; }
+ return pos
+}
+
+// Compute the character position closest to the given coordinates.
+// Input must be lineSpace-local ("div" coordinate system).
+function coordsChar(cm, x, y) {
+ var doc = cm.doc;
+ y += cm.display.viewOffset;
+ if (y < 0) { return PosWithInfo(doc.first, 0, null, true, -1) }
+ var lineN = lineAtHeight(doc, y), last = doc.first + doc.size - 1;
+ if (lineN > last)
+ { return PosWithInfo(doc.first + doc.size - 1, getLine(doc, last).text.length, null, true, 1) }
+ if (x < 0) { x = 0; }
+
+ var lineObj = getLine(doc, lineN);
+ for (;;) {
+ var found = coordsCharInner(cm, lineObj, lineN, x, y);
+ var merged = collapsedSpanAtEnd(lineObj);
+ var mergedPos = merged && merged.find(0, true);
+ if (merged && (found.ch > mergedPos.from.ch || found.ch == mergedPos.from.ch && found.xRel > 0))
+ { lineN = lineNo(lineObj = mergedPos.to.line); }
+ else
+ { return found }
+ }
+}
+
+function wrappedLineExtent(cm, lineObj, preparedMeasure, y) {
+ y -= widgetTopHeight(lineObj);
+ var end = lineObj.text.length;
+ var begin = findFirst(function (ch) { return measureCharPrepared(cm, preparedMeasure, ch - 1).bottom <= y; }, end, 0);
+ end = findFirst(function (ch) { return measureCharPrepared(cm, preparedMeasure, ch).top > y; }, begin, end);
+ return {begin: begin, end: end}
+}
+
+function wrappedLineExtentChar(cm, lineObj, preparedMeasure, target) {
+ if (!preparedMeasure) { preparedMeasure = prepareMeasureForLine(cm, lineObj); }
+ var targetTop = intoCoordSystem(cm, lineObj, measureCharPrepared(cm, preparedMeasure, target), "line").top;
+ return wrappedLineExtent(cm, lineObj, preparedMeasure, targetTop)
+}
+
+// Returns true if the given side of a box is after the given
+// coordinates, in top-to-bottom, left-to-right order.
+function boxIsAfter(box, x, y, left) {
+ return box.bottom <= y ? false : box.top > y ? true : (left ? box.left : box.right) > x
+}
+
+function coordsCharInner(cm, lineObj, lineNo$$1, x, y) {
+ // Move y into line-local coordinate space
+ y -= heightAtLine(lineObj);
+ var preparedMeasure = prepareMeasureForLine(cm, lineObj);
+ // When directly calling `measureCharPrepared`, we have to adjust
+ // for the widgets at this line.
+ var widgetHeight$$1 = widgetTopHeight(lineObj);
+ var begin = 0, end = lineObj.text.length, ltr = true;
+
+ var order = getOrder(lineObj, cm.doc.direction);
+ // If the line isn't plain left-to-right text, first figure out
+ // which bidi section the coordinates fall into.
+ if (order) {
+ var part = (cm.options.lineWrapping ? coordsBidiPartWrapped : coordsBidiPart)
+ (cm, lineObj, lineNo$$1, preparedMeasure, order, x, y);
+ ltr = part.level != 1;
+ // The awkward -1 offsets are needed because findFirst (called
+ // on these below) will treat its first bound as inclusive,
+ // second as exclusive, but we want to actually address the
+ // characters in the part's range
+ begin = ltr ? part.from : part.to - 1;
+ end = ltr ? part.to : part.from - 1;
+ }
+
+ // A binary search to find the first character whose bounding box
+ // starts after the coordinates. If we run across any whose box wrap
+ // the coordinates, store that.
+ var chAround = null, boxAround = null;
+ var ch = findFirst(function (ch) {
+ var box = measureCharPrepared(cm, preparedMeasure, ch);
+ box.top += widgetHeight$$1; box.bottom += widgetHeight$$1;
+ if (!boxIsAfter(box, x, y, false)) { return false }
+ if (box.top <= y && box.left <= x) {
+ chAround = ch;
+ boxAround = box;
+ }
+ return true
+ }, begin, end);
+
+ var baseX, sticky, outside = false;
+ // If a box around the coordinates was found, use that
+ if (boxAround) {
+ // Distinguish coordinates nearer to the left or right side of the box
+ var atLeft = x - boxAround.left < boxAround.right - x, atStart = atLeft == ltr;
+ ch = chAround + (atStart ? 0 : 1);
+ sticky = atStart ? "after" : "before";
+ baseX = atLeft ? boxAround.left : boxAround.right;
+ } else {
+ // (Adjust for extended bound, if necessary.)
+ if (!ltr && (ch == end || ch == begin)) { ch++; }
+ // To determine which side to associate with, get the box to the
+ // left of the character and compare it's vertical position to the
+ // coordinates
+ sticky = ch == 0 ? "after" : ch == lineObj.text.length ? "before" :
+ (measureCharPrepared(cm, preparedMeasure, ch - (ltr ? 1 : 0)).bottom + widgetHeight$$1 <= y) == ltr ?
+ "after" : "before";
+ // Now get accurate coordinates for this place, in order to get a
+ // base X position
+ var coords = cursorCoords(cm, Pos(lineNo$$1, ch, sticky), "line", lineObj, preparedMeasure);
+ baseX = coords.left;
+ outside = y < coords.top || y >= coords.bottom;
+ }
+
+ ch = skipExtendingChars(lineObj.text, ch, 1);
+ return PosWithInfo(lineNo$$1, ch, sticky, outside, x - baseX)
+}
+
+function coordsBidiPart(cm, lineObj, lineNo$$1, preparedMeasure, order, x, y) {
+ // Bidi parts are sorted left-to-right, and in a non-line-wrapping
+ // situation, we can take this ordering to correspond to the visual
+ // ordering. This finds the first part whose end is after the given
+ // coordinates.
+ var index = findFirst(function (i) {
+ var part = order[i], ltr = part.level != 1;
+ return boxIsAfter(cursorCoords(cm, Pos(lineNo$$1, ltr ? part.to : part.from, ltr ? "before" : "after"),
+ "line", lineObj, preparedMeasure), x, y, true)
+ }, 0, order.length - 1);
+ var part = order[index];
+ // If this isn't the first part, the part's start is also after
+ // the coordinates, and the coordinates aren't on the same line as
+ // that start, move one part back.
+ if (index > 0) {
+ var ltr = part.level != 1;
+ var start = cursorCoords(cm, Pos(lineNo$$1, ltr ? part.from : part.to, ltr ? "after" : "before"),
+ "line", lineObj, preparedMeasure);
+ if (boxIsAfter(start, x, y, true) && start.top > y)
+ { part = order[index - 1]; }
+ }
+ return part
+}
+
+function coordsBidiPartWrapped(cm, lineObj, _lineNo, preparedMeasure, order, x, y) {
+ // In a wrapped line, rtl text on wrapping boundaries can do things
+ // that don't correspond to the ordering in our `order` array at
+ // all, so a binary search doesn't work, and we want to return a
+ // part that only spans one line so that the binary search in
+ // coordsCharInner is safe. As such, we first find the extent of the
+ // wrapped line, and then do a flat search in which we discard any
+ // spans that aren't on the line.
+ var ref = wrappedLineExtent(cm, lineObj, preparedMeasure, y);
+ var begin = ref.begin;
+ var end = ref.end;
+ if (/\s/.test(lineObj.text.charAt(end - 1))) { end--; }
+ var part = null, closestDist = null;
+ for (var i = 0; i < order.length; i++) {
+ var p = order[i];
+ if (p.from >= end || p.to <= begin) { continue }
+ var ltr = p.level != 1;
+ var endX = measureCharPrepared(cm, preparedMeasure, ltr ? Math.min(end, p.to) - 1 : Math.max(begin, p.from)).right;
+ // Weigh against spans ending before this, so that they are only
+ // picked if nothing ends after
+ var dist = endX < x ? x - endX + 1e9 : endX - x;
+ if (!part || closestDist > dist) {
+ part = p;
+ closestDist = dist;
+ }
+ }
+ if (!part) { part = order[order.length - 1]; }
+ // Clip the part to the wrapped line.
+ if (part.from < begin) { part = {from: begin, to: part.to, level: part.level}; }
+ if (part.to > end) { part = {from: part.from, to: end, level: part.level}; }
+ return part
+}
+
+var measureText;
+// Compute the default text height.
+function textHeight(display) {
+ if (display.cachedTextHeight != null) { return display.cachedTextHeight }
+ if (measureText == null) {
+ measureText = elt("pre");
+ // Measure a bunch of lines, for browsers that compute
+ // fractional heights.
+ for (var i = 0; i < 49; ++i) {
+ measureText.appendChild(document.createTextNode("x"));
+ measureText.appendChild(elt("br"));
+ }
+ measureText.appendChild(document.createTextNode("x"));
+ }
+ removeChildrenAndAdd(display.measure, measureText);
+ var height = measureText.offsetHeight / 50;
+ if (height > 3) { display.cachedTextHeight = height; }
+ removeChildren(display.measure);
+ return height || 1
+}
+
+// Compute the default character width.
+function charWidth(display) {
+ if (display.cachedCharWidth != null) { return display.cachedCharWidth }
+ var anchor = elt("span", "xxxxxxxxxx");
+ var pre = elt("pre", [anchor]);
+ removeChildrenAndAdd(display.measure, pre);
+ var rect = anchor.getBoundingClientRect(), width = (rect.right - rect.left) / 10;
+ if (width > 2) { display.cachedCharWidth = width; }
+ return width || 10
+}
+
+// Do a bulk-read of the DOM positions and sizes needed to draw the
+// view, so that we don't interleave reading and writing to the DOM.
+function getDimensions(cm) {
+ var d = cm.display, left = {}, width = {};
+ var gutterLeft = d.gutters.clientLeft;
+ for (var n = d.gutters.firstChild, i = 0; n; n = n.nextSibling, ++i) {
+ left[cm.options.gutters[i]] = n.offsetLeft + n.clientLeft + gutterLeft;
+ width[cm.options.gutters[i]] = n.clientWidth;
+ }
+ return {fixedPos: compensateForHScroll(d),
+ gutterTotalWidth: d.gutters.offsetWidth,
+ gutterLeft: left,
+ gutterWidth: width,
+ wrapperWidth: d.wrapper.clientWidth}
+}
+
+// Computes display.scroller.scrollLeft + display.gutters.offsetWidth,
+// but using getBoundingClientRect to get a sub-pixel-accurate
+// result.
+function compensateForHScroll(display) {
+ return display.scroller.getBoundingClientRect().left - display.sizer.getBoundingClientRect().left
+}
+
+// Returns a function that estimates the height of a line, to use as
+// first approximation until the line becomes visible (and is thus
+// properly measurable).
+function estimateHeight(cm) {
+ var th = textHeight(cm.display), wrapping = cm.options.lineWrapping;
+ var perLine = wrapping && Math.max(5, cm.display.scroller.clientWidth / charWidth(cm.display) - 3);
+ return function (line) {
+ if (lineIsHidden(cm.doc, line)) { return 0 }
+
+ var widgetsHeight = 0;
+ if (line.widgets) { for (var i = 0; i < line.widgets.length; i++) {
+ if (line.widgets[i].height) { widgetsHeight += line.widgets[i].height; }
+ } }
+
+ if (wrapping)
+ { return widgetsHeight + (Math.ceil(line.text.length / perLine) || 1) * th }
+ else
+ { return widgetsHeight + th }
+ }
+}
+
+function estimateLineHeights(cm) {
+ var doc = cm.doc, est = estimateHeight(cm);
+ doc.iter(function (line) {
+ var estHeight = est(line);
+ if (estHeight != line.height) { updateLineHeight(line, estHeight); }
+ });
+}
+
+// Given a mouse event, find the corresponding position. If liberal
+// is false, it checks whether a gutter or scrollbar was clicked,
+// and returns null if it was. forRect is used by rectangular
+// selections, and tries to estimate a character position even for
+// coordinates beyond the right of the text.
+function posFromMouse(cm, e, liberal, forRect) {
+ var display = cm.display;
+ if (!liberal && e_target(e).getAttribute("cm-not-content") == "true") { return null }
+
+ var x, y, space = display.lineSpace.getBoundingClientRect();
+ // Fails unpredictably on IE[67] when mouse is dragged around quickly.
+ try { x = e.clientX - space.left; y = e.clientY - space.top; }
+ catch (e) { return null }
+ var coords = coordsChar(cm, x, y), line;
+ if (forRect && coords.xRel == 1 && (line = getLine(cm.doc, coords.line).text).length == coords.ch) {
+ var colDiff = countColumn(line, line.length, cm.options.tabSize) - line.length;
+ coords = Pos(coords.line, Math.max(0, Math.round((x - paddingH(cm.display).left) / charWidth(cm.display)) - colDiff));
+ }
+ return coords
+}
+
+// Find the view element corresponding to a given line. Return null
+// when the line isn't visible.
+function findViewIndex(cm, n) {
+ if (n >= cm.display.viewTo) { return null }
+ n -= cm.display.viewFrom;
+ if (n < 0) { return null }
+ var view = cm.display.view;
+ for (var i = 0; i < view.length; i++) {
+ n -= view[i].size;
+ if (n < 0) { return i }
+ }
+}
+
+function updateSelection(cm) {
+ cm.display.input.showSelection(cm.display.input.prepareSelection());
+}
+
+function prepareSelection(cm, primary) {
+ if ( primary === void 0 ) primary = true;
+
+ var doc = cm.doc, result = {};
+ var curFragment = result.cursors = document.createDocumentFragment();
+ var selFragment = result.selection = document.createDocumentFragment();
+
+ for (var i = 0; i < doc.sel.ranges.length; i++) {
+ if (!primary && i == doc.sel.primIndex) { continue }
+ var range$$1 = doc.sel.ranges[i];
+ if (range$$1.from().line >= cm.display.viewTo || range$$1.to().line < cm.display.viewFrom) { continue }
+ var collapsed = range$$1.empty();
+ if (collapsed || cm.options.showCursorWhenSelecting)
+ { drawSelectionCursor(cm, range$$1.head, curFragment); }
+ if (!collapsed)
+ { drawSelectionRange(cm, range$$1, selFragment); }
+ }
+ return result
+}
+
+// Draws a cursor for the given range
+function drawSelectionCursor(cm, head, output) {
+ var pos = cursorCoords(cm, head, "div", null, null, !cm.options.singleCursorHeightPerLine);
+
+ var cursor = output.appendChild(elt("div", "\u00a0", "CodeMirror-cursor"));
+ cursor.style.left = pos.left + "px";
+ cursor.style.top = pos.top + "px";
+ cursor.style.height = Math.max(0, pos.bottom - pos.top) * cm.options.cursorHeight + "px";
+
+ if (pos.other) {
+ // Secondary cursor, shown when on a 'jump' in bi-directional text
+ var otherCursor = output.appendChild(elt("div", "\u00a0", "CodeMirror-cursor CodeMirror-secondarycursor"));
+ otherCursor.style.display = "";
+ otherCursor.style.left = pos.other.left + "px";
+ otherCursor.style.top = pos.other.top + "px";
+ otherCursor.style.height = (pos.other.bottom - pos.other.top) * .85 + "px";
+ }
+}
+
+function cmpCoords(a, b) { return a.top - b.top || a.left - b.left }
+
+// Draws the given range as a highlighted selection
+function drawSelectionRange(cm, range$$1, output) {
+ var display = cm.display, doc = cm.doc;
+ var fragment = document.createDocumentFragment();
+ var padding = paddingH(cm.display), leftSide = padding.left;
+ var rightSide = Math.max(display.sizerWidth, displayWidth(cm) - display.sizer.offsetLeft) - padding.right;
+ var docLTR = doc.direction == "ltr";
+
+ function add(left, top, width, bottom) {
+ if (top < 0) { top = 0; }
+ top = Math.round(top);
+ bottom = Math.round(bottom);
+ fragment.appendChild(elt("div", null, "CodeMirror-selected", ("position: absolute; left: " + left + "px;\n top: " + top + "px; width: " + (width == null ? rightSide - left : width) + "px;\n height: " + (bottom - top) + "px")));
+ }
+
+ function drawForLine(line, fromArg, toArg) {
+ var lineObj = getLine(doc, line);
+ var lineLen = lineObj.text.length;
+ var start, end;
+ function coords(ch, bias) {
+ return charCoords(cm, Pos(line, ch), "div", lineObj, bias)
+ }
+
+ function wrapX(pos, dir, side) {
+ var extent = wrappedLineExtentChar(cm, lineObj, null, pos);
+ var prop = (dir == "ltr") == (side == "after") ? "left" : "right";
+ var ch = side == "after" ? extent.begin : extent.end - (/\s/.test(lineObj.text.charAt(extent.end - 1)) ? 2 : 1);
+ return coords(ch, prop)[prop]
+ }
+
+ var order = getOrder(lineObj, doc.direction);
+ iterateBidiSections(order, fromArg || 0, toArg == null ? lineLen : toArg, function (from, to, dir, i) {
+ var ltr = dir == "ltr";
+ var fromPos = coords(from, ltr ? "left" : "right");
+ var toPos = coords(to - 1, ltr ? "right" : "left");
+
+ var openStart = fromArg == null && from == 0, openEnd = toArg == null && to == lineLen;
+ var first = i == 0, last = !order || i == order.length - 1;
+ if (toPos.top - fromPos.top <= 3) { // Single line
+ var openLeft = (docLTR ? openStart : openEnd) && first;
+ var openRight = (docLTR ? openEnd : openStart) && last;
+ var left = openLeft ? leftSide : (ltr ? fromPos : toPos).left;
+ var right = openRight ? rightSide : (ltr ? toPos : fromPos).right;
+ add(left, fromPos.top, right - left, fromPos.bottom);
+ } else { // Multiple lines
+ var topLeft, topRight, botLeft, botRight;
+ if (ltr) {
+ topLeft = docLTR && openStart && first ? leftSide : fromPos.left;
+ topRight = docLTR ? rightSide : wrapX(from, dir, "before");
+ botLeft = docLTR ? leftSide : wrapX(to, dir, "after");
+ botRight = docLTR && openEnd && last ? rightSide : toPos.right;
+ } else {
+ topLeft = !docLTR ? leftSide : wrapX(from, dir, "before");
+ topRight = !docLTR && openStart && first ? rightSide : fromPos.right;
+ botLeft = !docLTR && openEnd && last ? leftSide : toPos.left;
+ botRight = !docLTR ? rightSide : wrapX(to, dir, "after");
+ }
+ add(topLeft, fromPos.top, topRight - topLeft, fromPos.bottom);
+ if (fromPos.bottom < toPos.top) { add(leftSide, fromPos.bottom, null, toPos.top); }
+ add(botLeft, toPos.top, botRight - botLeft, toPos.bottom);
+ }
+
+ if (!start || cmpCoords(fromPos, start) < 0) { start = fromPos; }
+ if (cmpCoords(toPos, start) < 0) { start = toPos; }
+ if (!end || cmpCoords(fromPos, end) < 0) { end = fromPos; }
+ if (cmpCoords(toPos, end) < 0) { end = toPos; }
+ });
+ return {start: start, end: end}
+ }
+
+ var sFrom = range$$1.from(), sTo = range$$1.to();
+ if (sFrom.line == sTo.line) {
+ drawForLine(sFrom.line, sFrom.ch, sTo.ch);
+ } else {
+ var fromLine = getLine(doc, sFrom.line), toLine = getLine(doc, sTo.line);
+ var singleVLine = visualLine(fromLine) == visualLine(toLine);
+ var leftEnd = drawForLine(sFrom.line, sFrom.ch, singleVLine ? fromLine.text.length + 1 : null).end;
+ var rightStart = drawForLine(sTo.line, singleVLine ? 0 : null, sTo.ch).start;
+ if (singleVLine) {
+ if (leftEnd.top < rightStart.top - 2) {
+ add(leftEnd.right, leftEnd.top, null, leftEnd.bottom);
+ add(leftSide, rightStart.top, rightStart.left, rightStart.bottom);
+ } else {
+ add(leftEnd.right, leftEnd.top, rightStart.left - leftEnd.right, leftEnd.bottom);
+ }
+ }
+ if (leftEnd.bottom < rightStart.top)
+ { add(leftSide, leftEnd.bottom, null, rightStart.top); }
+ }
+
+ output.appendChild(fragment);
+}
+
+// Cursor-blinking
+function restartBlink(cm) {
+ if (!cm.state.focused) { return }
+ var display = cm.display;
+ clearInterval(display.blinker);
+ var on = true;
+ display.cursorDiv.style.visibility = "";
+ if (cm.options.cursorBlinkRate > 0)
+ { display.blinker = setInterval(function () { return display.cursorDiv.style.visibility = (on = !on) ? "" : "hidden"; },
+ cm.options.cursorBlinkRate); }
+ else if (cm.options.cursorBlinkRate < 0)
+ { display.cursorDiv.style.visibility = "hidden"; }
+}
+
+function ensureFocus(cm) {
+ if (!cm.state.focused) { cm.display.input.focus(); onFocus(cm); }
+}
+
+function delayBlurEvent(cm) {
+ cm.state.delayingBlurEvent = true;
+ setTimeout(function () { if (cm.state.delayingBlurEvent) {
+ cm.state.delayingBlurEvent = false;
+ onBlur(cm);
+ } }, 100);
+}
+
+function onFocus(cm, e) {
+ if (cm.state.delayingBlurEvent) { cm.state.delayingBlurEvent = false; }
+
+ if (cm.options.readOnly == "nocursor") { return }
+ if (!cm.state.focused) {
+ signal(cm, "focus", cm, e);
+ cm.state.focused = true;
+ addClass(cm.display.wrapper, "CodeMirror-focused");
+ // This test prevents this from firing when a context
+ // menu is closed (since the input reset would kill the
+ // select-all detection hack)
+ if (!cm.curOp && cm.display.selForContextMenu != cm.doc.sel) {
+ cm.display.input.reset();
+ if (webkit) { setTimeout(function () { return cm.display.input.reset(true); }, 20); } // Issue #1730
+ }
+ cm.display.input.receivedFocus();
+ }
+ restartBlink(cm);
+}
+function onBlur(cm, e) {
+ if (cm.state.delayingBlurEvent) { return }
+
+ if (cm.state.focused) {
+ signal(cm, "blur", cm, e);
+ cm.state.focused = false;
+ rmClass(cm.display.wrapper, "CodeMirror-focused");
+ }
+ clearInterval(cm.display.blinker);
+ setTimeout(function () { if (!cm.state.focused) { cm.display.shift = false; } }, 150);
+}
+
+// Read the actual heights of the rendered lines, and update their
+// stored heights to match.
+function updateHeightsInViewport(cm) {
+ var display = cm.display;
+ var prevBottom = display.lineDiv.offsetTop;
+ for (var i = 0; i < display.view.length; i++) {
+ var cur = display.view[i], height = (void 0);
+ if (cur.hidden) { continue }
+ if (ie && ie_version < 8) {
+ var bot = cur.node.offsetTop + cur.node.offsetHeight;
+ height = bot - prevBottom;
+ prevBottom = bot;
+ } else {
+ var box = cur.node.getBoundingClientRect();
+ height = box.bottom - box.top;
+ }
+ var diff = cur.line.height - height;
+ if (height < 2) { height = textHeight(display); }
+ if (diff > .005 || diff < -.005) {
+ updateLineHeight(cur.line, height);
+ updateWidgetHeight(cur.line);
+ if (cur.rest) { for (var j = 0; j < cur.rest.length; j++)
+ { updateWidgetHeight(cur.rest[j]); } }
+ }
+ }
+}
+
+// Read and store the height of line widgets associated with the
+// given line.
+function updateWidgetHeight(line) {
+ if (line.widgets) { for (var i = 0; i < line.widgets.length; ++i) {
+ var w = line.widgets[i], parent = w.node.parentNode;
+ if (parent) { w.height = parent.offsetHeight; }
+ } }
+}
+
+// Compute the lines that are visible in a given viewport (defaults
+// the the current scroll position). viewport may contain top,
+// height, and ensure (see op.scrollToPos) properties.
+function visibleLines(display, doc, viewport) {
+ var top = viewport && viewport.top != null ? Math.max(0, viewport.top) : display.scroller.scrollTop;
+ top = Math.floor(top - paddingTop(display));
+ var bottom = viewport && viewport.bottom != null ? viewport.bottom : top + display.wrapper.clientHeight;
+
+ var from = lineAtHeight(doc, top), to = lineAtHeight(doc, bottom);
+ // Ensure is a {from: {line, ch}, to: {line, ch}} object, and
+ // forces those lines into the viewport (if possible).
+ if (viewport && viewport.ensure) {
+ var ensureFrom = viewport.ensure.from.line, ensureTo = viewport.ensure.to.line;
+ if (ensureFrom < from) {
+ from = ensureFrom;
+ to = lineAtHeight(doc, heightAtLine(getLine(doc, ensureFrom)) + display.wrapper.clientHeight);
+ } else if (Math.min(ensureTo, doc.lastLine()) >= to) {
+ from = lineAtHeight(doc, heightAtLine(getLine(doc, ensureTo)) - display.wrapper.clientHeight);
+ to = ensureTo;
+ }
+ }
+ return {from: from, to: Math.max(to, from + 1)}
+}
+
+// Re-align line numbers and gutter marks to compensate for
+// horizontal scrolling.
+function alignHorizontally(cm) {
+ var display = cm.display, view = display.view;
+ if (!display.alignWidgets && (!display.gutters.firstChild || !cm.options.fixedGutter)) { return }
+ var comp = compensateForHScroll(display) - display.scroller.scrollLeft + cm.doc.scrollLeft;
+ var gutterW = display.gutters.offsetWidth, left = comp + "px";
+ for (var i = 0; i < view.length; i++) { if (!view[i].hidden) {
+ if (cm.options.fixedGutter) {
+ if (view[i].gutter)
+ { view[i].gutter.style.left = left; }
+ if (view[i].gutterBackground)
+ { view[i].gutterBackground.style.left = left; }
+ }
+ var align = view[i].alignable;
+ if (align) { for (var j = 0; j < align.length; j++)
+ { align[j].style.left = left; } }
+ } }
+ if (cm.options.fixedGutter)
+ { display.gutters.style.left = (comp + gutterW) + "px"; }
+}
+
+// Used to ensure that the line number gutter is still the right
+// size for the current document size. Returns true when an update
+// is needed.
+function maybeUpdateLineNumberWidth(cm) {
+ if (!cm.options.lineNumbers) { return false }
+ var doc = cm.doc, last = lineNumberFor(cm.options, doc.first + doc.size - 1), display = cm.display;
+ if (last.length != display.lineNumChars) {
+ var test = display.measure.appendChild(elt("div", [elt("div", last)],
+ "CodeMirror-linenumber CodeMirror-gutter-elt"));
+ var innerW = test.firstChild.offsetWidth, padding = test.offsetWidth - innerW;
+ display.lineGutter.style.width = "";
+ display.lineNumInnerWidth = Math.max(innerW, display.lineGutter.offsetWidth - padding) + 1;
+ display.lineNumWidth = display.lineNumInnerWidth + padding;
+ display.lineNumChars = display.lineNumInnerWidth ? last.length : -1;
+ display.lineGutter.style.width = display.lineNumWidth + "px";
+ updateGutterSpace(cm);
+ return true
+ }
+ return false
+}
+
+// SCROLLING THINGS INTO VIEW
+
+// If an editor sits on the top or bottom of the window, partially
+// scrolled out of view, this ensures that the cursor is visible.
+function maybeScrollWindow(cm, rect) {
+ if (signalDOMEvent(cm, "scrollCursorIntoView")) { return }
+
+ var display = cm.display, box = display.sizer.getBoundingClientRect(), doScroll = null;
+ if (rect.top + box.top < 0) { doScroll = true; }
+ else if (rect.bottom + box.top > (window.innerHeight || document.documentElement.clientHeight)) { doScroll = false; }
+ if (doScroll != null && !phantom) {
+ var scrollNode = elt("div", "\u200b", null, ("position: absolute;\n top: " + (rect.top - display.viewOffset - paddingTop(cm.display)) + "px;\n height: " + (rect.bottom - rect.top + scrollGap(cm) + display.barHeight) + "px;\n left: " + (rect.left) + "px; width: " + (Math.max(2, rect.right - rect.left)) + "px;"));
+ cm.display.lineSpace.appendChild(scrollNode);
+ scrollNode.scrollIntoView(doScroll);
+ cm.display.lineSpace.removeChild(scrollNode);
+ }
+}
+
+// Scroll a given position into view (immediately), verifying that
+// it actually became visible (as line heights are accurately
+// measured, the position of something may 'drift' during drawing).
+function scrollPosIntoView(cm, pos, end, margin) {
+ if (margin == null) { margin = 0; }
+ var rect;
+ if (!cm.options.lineWrapping && pos == end) {
+ // Set pos and end to the cursor positions around the character pos sticks to
+ // If pos.sticky == "before", that is around pos.ch - 1, otherwise around pos.ch
+ // If pos == Pos(_, 0, "before"), pos and end are unchanged
+ pos = pos.ch ? Pos(pos.line, pos.sticky == "before" ? pos.ch - 1 : pos.ch, "after") : pos;
+ end = pos.sticky == "before" ? Pos(pos.line, pos.ch + 1, "before") : pos;
+ }
+ for (var limit = 0; limit < 5; limit++) {
+ var changed = false;
+ var coords = cursorCoords(cm, pos);
+ var endCoords = !end || end == pos ? coords : cursorCoords(cm, end);
+ rect = {left: Math.min(coords.left, endCoords.left),
+ top: Math.min(coords.top, endCoords.top) - margin,
+ right: Math.max(coords.left, endCoords.left),
+ bottom: Math.max(coords.bottom, endCoords.bottom) + margin};
+ var scrollPos = calculateScrollPos(cm, rect);
+ var startTop = cm.doc.scrollTop, startLeft = cm.doc.scrollLeft;
+ if (scrollPos.scrollTop != null) {
+ updateScrollTop(cm, scrollPos.scrollTop);
+ if (Math.abs(cm.doc.scrollTop - startTop) > 1) { changed = true; }
+ }
+ if (scrollPos.scrollLeft != null) {
+ setScrollLeft(cm, scrollPos.scrollLeft);
+ if (Math.abs(cm.doc.scrollLeft - startLeft) > 1) { changed = true; }
+ }
+ if (!changed) { break }
+ }
+ return rect
+}
+
+// Scroll a given set of coordinates into view (immediately).
+function scrollIntoView(cm, rect) {
+ var scrollPos = calculateScrollPos(cm, rect);
+ if (scrollPos.scrollTop != null) { updateScrollTop(cm, scrollPos.scrollTop); }
+ if (scrollPos.scrollLeft != null) { setScrollLeft(cm, scrollPos.scrollLeft); }
+}
+
+// Calculate a new scroll position needed to scroll the given
+// rectangle into view. Returns an object with scrollTop and
+// scrollLeft properties. When these are undefined, the
+// vertical/horizontal position does not need to be adjusted.
+function calculateScrollPos(cm, rect) {
+ var display = cm.display, snapMargin = textHeight(cm.display);
+ if (rect.top < 0) { rect.top = 0; }
+ var screentop = cm.curOp && cm.curOp.scrollTop != null ? cm.curOp.scrollTop : display.scroller.scrollTop;
+ var screen = displayHeight(cm), result = {};
+ if (rect.bottom - rect.top > screen) { rect.bottom = rect.top + screen; }
+ var docBottom = cm.doc.height + paddingVert(display);
+ var atTop = rect.top < snapMargin, atBottom = rect.bottom > docBottom - snapMargin;
+ if (rect.top < screentop) {
+ result.scrollTop = atTop ? 0 : rect.top;
+ } else if (rect.bottom > screentop + screen) {
+ var newTop = Math.min(rect.top, (atBottom ? docBottom : rect.bottom) - screen);
+ if (newTop != screentop) { result.scrollTop = newTop; }
+ }
+
+ var screenleft = cm.curOp && cm.curOp.scrollLeft != null ? cm.curOp.scrollLeft : display.scroller.scrollLeft;
+ var screenw = displayWidth(cm) - (cm.options.fixedGutter ? display.gutters.offsetWidth : 0);
+ var tooWide = rect.right - rect.left > screenw;
+ if (tooWide) { rect.right = rect.left + screenw; }
+ if (rect.left < 10)
+ { result.scrollLeft = 0; }
+ else if (rect.left < screenleft)
+ { result.scrollLeft = Math.max(0, rect.left - (tooWide ? 0 : 10)); }
+ else if (rect.right > screenw + screenleft - 3)
+ { result.scrollLeft = rect.right + (tooWide ? 0 : 10) - screenw; }
+ return result
+}
+
+// Store a relative adjustment to the scroll position in the current
+// operation (to be applied when the operation finishes).
+function addToScrollTop(cm, top) {
+ if (top == null) { return }
+ resolveScrollToPos(cm);
+ cm.curOp.scrollTop = (cm.curOp.scrollTop == null ? cm.doc.scrollTop : cm.curOp.scrollTop) + top;
+}
+
+// Make sure that at the end of the operation the current cursor is
+// shown.
+function ensureCursorVisible(cm) {
+ resolveScrollToPos(cm);
+ var cur = cm.getCursor();
+ cm.curOp.scrollToPos = {from: cur, to: cur, margin: cm.options.cursorScrollMargin};
+}
+
+function scrollToCoords(cm, x, y) {
+ if (x != null || y != null) { resolveScrollToPos(cm); }
+ if (x != null) { cm.curOp.scrollLeft = x; }
+ if (y != null) { cm.curOp.scrollTop = y; }
+}
+
+function scrollToRange(cm, range$$1) {
+ resolveScrollToPos(cm);
+ cm.curOp.scrollToPos = range$$1;
+}
+
+// When an operation has its scrollToPos property set, and another
+// scroll action is applied before the end of the operation, this
+// 'simulates' scrolling that position into view in a cheap way, so
+// that the effect of intermediate scroll commands is not ignored.
+function resolveScrollToPos(cm) {
+ var range$$1 = cm.curOp.scrollToPos;
+ if (range$$1) {
+ cm.curOp.scrollToPos = null;
+ var from = estimateCoords(cm, range$$1.from), to = estimateCoords(cm, range$$1.to);
+ scrollToCoordsRange(cm, from, to, range$$1.margin);
+ }
+}
+
+function scrollToCoordsRange(cm, from, to, margin) {
+ var sPos = calculateScrollPos(cm, {
+ left: Math.min(from.left, to.left),
+ top: Math.min(from.top, to.top) - margin,
+ right: Math.max(from.right, to.right),
+ bottom: Math.max(from.bottom, to.bottom) + margin
+ });
+ scrollToCoords(cm, sPos.scrollLeft, sPos.scrollTop);
+}
+
+// Sync the scrollable area and scrollbars, ensure the viewport
+// covers the visible area.
+function updateScrollTop(cm, val) {
+ if (Math.abs(cm.doc.scrollTop - val) < 2) { return }
+ if (!gecko) { updateDisplaySimple(cm, {top: val}); }
+ setScrollTop(cm, val, true);
+ if (gecko) { updateDisplaySimple(cm); }
+ startWorker(cm, 100);
+}
+
+function setScrollTop(cm, val, forceScroll) {
+ val = Math.min(cm.display.scroller.scrollHeight - cm.display.scroller.clientHeight, val);
+ if (cm.display.scroller.scrollTop == val && !forceScroll) { return }
+ cm.doc.scrollTop = val;
+ cm.display.scrollbars.setScrollTop(val);
+ if (cm.display.scroller.scrollTop != val) { cm.display.scroller.scrollTop = val; }
+}
+
+// Sync scroller and scrollbar, ensure the gutter elements are
+// aligned.
+function setScrollLeft(cm, val, isScroller, forceScroll) {
+ val = Math.min(val, cm.display.scroller.scrollWidth - cm.display.scroller.clientWidth);
+ if ((isScroller ? val == cm.doc.scrollLeft : Math.abs(cm.doc.scrollLeft - val) < 2) && !forceScroll) { return }
+ cm.doc.scrollLeft = val;
+ alignHorizontally(cm);
+ if (cm.display.scroller.scrollLeft != val) { cm.display.scroller.scrollLeft = val; }
+ cm.display.scrollbars.setScrollLeft(val);
+}
+
+// SCROLLBARS
+
+// Prepare DOM reads needed to update the scrollbars. Done in one
+// shot to minimize update/measure roundtrips.
+function measureForScrollbars(cm) {
+ var d = cm.display, gutterW = d.gutters.offsetWidth;
+ var docH = Math.round(cm.doc.height + paddingVert(cm.display));
+ return {
+ clientHeight: d.scroller.clientHeight,
+ viewHeight: d.wrapper.clientHeight,
+ scrollWidth: d.scroller.scrollWidth, clientWidth: d.scroller.clientWidth,
+ viewWidth: d.wrapper.clientWidth,
+ barLeft: cm.options.fixedGutter ? gutterW : 0,
+ docHeight: docH,
+ scrollHeight: docH + scrollGap(cm) + d.barHeight,
+ nativeBarWidth: d.nativeBarWidth,
+ gutterWidth: gutterW
+ }
+}
+
+var NativeScrollbars = function(place, scroll, cm) {
+ this.cm = cm;
+ var vert = this.vert = elt("div", [elt("div", null, null, "min-width: 1px")], "CodeMirror-vscrollbar");
+ var horiz = this.horiz = elt("div", [elt("div", null, null, "height: 100%; min-height: 1px")], "CodeMirror-hscrollbar");
+ place(vert); place(horiz);
+
+ on(vert, "scroll", function () {
+ if (vert.clientHeight) { scroll(vert.scrollTop, "vertical"); }
+ });
+ on(horiz, "scroll", function () {
+ if (horiz.clientWidth) { scroll(horiz.scrollLeft, "horizontal"); }
+ });
+
+ this.checkedZeroWidth = false;
+ // Need to set a minimum width to see the scrollbar on IE7 (but must not set it on IE8).
+ if (ie && ie_version < 8) { this.horiz.style.minHeight = this.vert.style.minWidth = "18px"; }
+};
+
+NativeScrollbars.prototype.update = function (measure) {
+ var needsH = measure.scrollWidth > measure.clientWidth + 1;
+ var needsV = measure.scrollHeight > measure.clientHeight + 1;
+ var sWidth = measure.nativeBarWidth;
+
+ if (needsV) {
+ this.vert.style.display = "block";
+ this.vert.style.bottom = needsH ? sWidth + "px" : "0";
+ var totalHeight = measure.viewHeight - (needsH ? sWidth : 0);
+ // A bug in IE8 can cause this value to be negative, so guard it.
+ this.vert.firstChild.style.height =
+ Math.max(0, measure.scrollHeight - measure.clientHeight + totalHeight) + "px";
+ } else {
+ this.vert.style.display = "";
+ this.vert.firstChild.style.height = "0";
+ }
+
+ if (needsH) {
+ this.horiz.style.display = "block";
+ this.horiz.style.right = needsV ? sWidth + "px" : "0";
+ this.horiz.style.left = measure.barLeft + "px";
+ var totalWidth = measure.viewWidth - measure.barLeft - (needsV ? sWidth : 0);
+ this.horiz.firstChild.style.width =
+ Math.max(0, measure.scrollWidth - measure.clientWidth + totalWidth) + "px";
+ } else {
+ this.horiz.style.display = "";
+ this.horiz.firstChild.style.width = "0";
+ }
+
+ if (!this.checkedZeroWidth && measure.clientHeight > 0) {
+ if (sWidth == 0) { this.zeroWidthHack(); }
+ this.checkedZeroWidth = true;
+ }
+
+ return {right: needsV ? sWidth : 0, bottom: needsH ? sWidth : 0}
+};
+
+NativeScrollbars.prototype.setScrollLeft = function (pos) {
+ if (this.horiz.scrollLeft != pos) { this.horiz.scrollLeft = pos; }
+ if (this.disableHoriz) { this.enableZeroWidthBar(this.horiz, this.disableHoriz, "horiz"); }
+};
+
+NativeScrollbars.prototype.setScrollTop = function (pos) {
+ if (this.vert.scrollTop != pos) { this.vert.scrollTop = pos; }
+ if (this.disableVert) { this.enableZeroWidthBar(this.vert, this.disableVert, "vert"); }
+};
+
+NativeScrollbars.prototype.zeroWidthHack = function () {
+ var w = mac && !mac_geMountainLion ? "12px" : "18px";
+ this.horiz.style.height = this.vert.style.width = w;
+ this.horiz.style.pointerEvents = this.vert.style.pointerEvents = "none";
+ this.disableHoriz = new Delayed;
+ this.disableVert = new Delayed;
+};
+
+NativeScrollbars.prototype.enableZeroWidthBar = function (bar, delay, type) {
+ bar.style.pointerEvents = "auto";
+ function maybeDisable() {
+ // To find out whether the scrollbar is still visible, we
+ // check whether the element under the pixel in the bottom
+ // right corner of the scrollbar box is the scrollbar box
+ // itself (when the bar is still visible) or its filler child
+ // (when the bar is hidden). If it is still visible, we keep
+ // it enabled, if it's hidden, we disable pointer events.
+ var box = bar.getBoundingClientRect();
+ var elt$$1 = type == "vert" ? document.elementFromPoint(box.right - 1, (box.top + box.bottom) / 2)
+ : document.elementFromPoint((box.right + box.left) / 2, box.bottom - 1);
+ if (elt$$1 != bar) { bar.style.pointerEvents = "none"; }
+ else { delay.set(1000, maybeDisable); }
+ }
+ delay.set(1000, maybeDisable);
+};
+
+NativeScrollbars.prototype.clear = function () {
+ var parent = this.horiz.parentNode;
+ parent.removeChild(this.horiz);
+ parent.removeChild(this.vert);
+};
+
+var NullScrollbars = function () {};
+
+NullScrollbars.prototype.update = function () { return {bottom: 0, right: 0} };
+NullScrollbars.prototype.setScrollLeft = function () {};
+NullScrollbars.prototype.setScrollTop = function () {};
+NullScrollbars.prototype.clear = function () {};
+
+function updateScrollbars(cm, measure) {
+ if (!measure) { measure = measureForScrollbars(cm); }
+ var startWidth = cm.display.barWidth, startHeight = cm.display.barHeight;
+ updateScrollbarsInner(cm, measure);
+ for (var i = 0; i < 4 && startWidth != cm.display.barWidth || startHeight != cm.display.barHeight; i++) {
+ if (startWidth != cm.display.barWidth && cm.options.lineWrapping)
+ { updateHeightsInViewport(cm); }
+ updateScrollbarsInner(cm, measureForScrollbars(cm));
+ startWidth = cm.display.barWidth; startHeight = cm.display.barHeight;
+ }
+}
+
+// Re-synchronize the fake scrollbars with the actual size of the
+// content.
+function updateScrollbarsInner(cm, measure) {
+ var d = cm.display;
+ var sizes = d.scrollbars.update(measure);
+
+ d.sizer.style.paddingRight = (d.barWidth = sizes.right) + "px";
+ d.sizer.style.paddingBottom = (d.barHeight = sizes.bottom) + "px";
+ d.heightForcer.style.borderBottom = sizes.bottom + "px solid transparent";
+
+ if (sizes.right && sizes.bottom) {
+ d.scrollbarFiller.style.display = "block";
+ d.scrollbarFiller.style.height = sizes.bottom + "px";
+ d.scrollbarFiller.style.width = sizes.right + "px";
+ } else { d.scrollbarFiller.style.display = ""; }
+ if (sizes.bottom && cm.options.coverGutterNextToScrollbar && cm.options.fixedGutter) {
+ d.gutterFiller.style.display = "block";
+ d.gutterFiller.style.height = sizes.bottom + "px";
+ d.gutterFiller.style.width = measure.gutterWidth + "px";
+ } else { d.gutterFiller.style.display = ""; }
+}
+
+var scrollbarModel = {"native": NativeScrollbars, "null": NullScrollbars};
+
+function initScrollbars(cm) {
+ if (cm.display.scrollbars) {
+ cm.display.scrollbars.clear();
+ if (cm.display.scrollbars.addClass)
+ { rmClass(cm.display.wrapper, cm.display.scrollbars.addClass); }
+ }
+
+ cm.display.scrollbars = new scrollbarModel[cm.options.scrollbarStyle](function (node) {
+ cm.display.wrapper.insertBefore(node, cm.display.scrollbarFiller);
+ // Prevent clicks in the scrollbars from killing focus
+ on(node, "mousedown", function () {
+ if (cm.state.focused) { setTimeout(function () { return cm.display.input.focus(); }, 0); }
+ });
+ node.setAttribute("cm-not-content", "true");
+ }, function (pos, axis) {
+ if (axis == "horizontal") { setScrollLeft(cm, pos); }
+ else { updateScrollTop(cm, pos); }
+ }, cm);
+ if (cm.display.scrollbars.addClass)
+ { addClass(cm.display.wrapper, cm.display.scrollbars.addClass); }
+}
+
+// Operations are used to wrap a series of changes to the editor
+// state in such a way that each change won't have to update the
+// cursor and display (which would be awkward, slow, and
+// error-prone). Instead, display updates are batched and then all
+// combined and executed at once.
+
+var nextOpId = 0;
+// Start a new operation.
+function startOperation(cm) {
+ cm.curOp = {
+ cm: cm,
+ viewChanged: false, // Flag that indicates that lines might need to be redrawn
+ startHeight: cm.doc.height, // Used to detect need to update scrollbar
+ forceUpdate: false, // Used to force a redraw
+ updateInput: null, // Whether to reset the input textarea
+ typing: false, // Whether this reset should be careful to leave existing text (for compositing)
+ changeObjs: null, // Accumulated changes, for firing change events
+ cursorActivityHandlers: null, // Set of handlers to fire cursorActivity on
+ cursorActivityCalled: 0, // Tracks which cursorActivity handlers have been called already
+ selectionChanged: false, // Whether the selection needs to be redrawn
+ updateMaxLine: false, // Set when the widest line needs to be determined anew
+ scrollLeft: null, scrollTop: null, // Intermediate scroll position, not pushed to DOM yet
+ scrollToPos: null, // Used to scroll to a specific position
+ focus: false,
+ id: ++nextOpId // Unique ID
+ };
+ pushOperation(cm.curOp);
+}
+
+// Finish an operation, updating the display and signalling delayed events
+function endOperation(cm) {
+ var op = cm.curOp;
+ finishOperation(op, function (group) {
+ for (var i = 0; i < group.ops.length; i++)
+ { group.ops[i].cm.curOp = null; }
+ endOperations(group);
+ });
+}
+
+// The DOM updates done when an operation finishes are batched so
+// that the minimum number of relayouts are required.
+function endOperations(group) {
+ var ops = group.ops;
+ for (var i = 0; i < ops.length; i++) // Read DOM
+ { endOperation_R1(ops[i]); }
+ for (var i$1 = 0; i$1 < ops.length; i$1++) // Write DOM (maybe)
+ { endOperation_W1(ops[i$1]); }
+ for (var i$2 = 0; i$2 < ops.length; i$2++) // Read DOM
+ { endOperation_R2(ops[i$2]); }
+ for (var i$3 = 0; i$3 < ops.length; i$3++) // Write DOM (maybe)
+ { endOperation_W2(ops[i$3]); }
+ for (var i$4 = 0; i$4 < ops.length; i$4++) // Read DOM
+ { endOperation_finish(ops[i$4]); }
+}
+
+function endOperation_R1(op) {
+ var cm = op.cm, display = cm.display;
+ maybeClipScrollbars(cm);
+ if (op.updateMaxLine) { findMaxLine(cm); }
+
+ op.mustUpdate = op.viewChanged || op.forceUpdate || op.scrollTop != null ||
+ op.scrollToPos && (op.scrollToPos.from.line < display.viewFrom ||
+ op.scrollToPos.to.line >= display.viewTo) ||
+ display.maxLineChanged && cm.options.lineWrapping;
+ op.update = op.mustUpdate &&
+ new DisplayUpdate(cm, op.mustUpdate && {top: op.scrollTop, ensure: op.scrollToPos}, op.forceUpdate);
+}
+
+function endOperation_W1(op) {
+ op.updatedDisplay = op.mustUpdate && updateDisplayIfNeeded(op.cm, op.update);
+}
+
+function endOperation_R2(op) {
+ var cm = op.cm, display = cm.display;
+ if (op.updatedDisplay) { updateHeightsInViewport(cm); }
+
+ op.barMeasure = measureForScrollbars(cm);
+
+ // If the max line changed since it was last measured, measure it,
+ // and ensure the document's width matches it.
+ // updateDisplay_W2 will use these properties to do the actual resizing
+ if (display.maxLineChanged && !cm.options.lineWrapping) {
+ op.adjustWidthTo = measureChar(cm, display.maxLine, display.maxLine.text.length).left + 3;
+ cm.display.sizerWidth = op.adjustWidthTo;
+ op.barMeasure.scrollWidth =
+ Math.max(display.scroller.clientWidth, display.sizer.offsetLeft + op.adjustWidthTo + scrollGap(cm) + cm.display.barWidth);
+ op.maxScrollLeft = Math.max(0, display.sizer.offsetLeft + op.adjustWidthTo - displayWidth(cm));
+ }
+
+ if (op.updatedDisplay || op.selectionChanged)
+ { op.preparedSelection = display.input.prepareSelection(); }
+}
+
+function endOperation_W2(op) {
+ var cm = op.cm;
+
+ if (op.adjustWidthTo != null) {
+ cm.display.sizer.style.minWidth = op.adjustWidthTo + "px";
+ if (op.maxScrollLeft < cm.doc.scrollLeft)
+ { setScrollLeft(cm, Math.min(cm.display.scroller.scrollLeft, op.maxScrollLeft), true); }
+ cm.display.maxLineChanged = false;
+ }
+
+ var takeFocus = op.focus && op.focus == activeElt();
+ if (op.preparedSelection)
+ { cm.display.input.showSelection(op.preparedSelection, takeFocus); }
+ if (op.updatedDisplay || op.startHeight != cm.doc.height)
+ { updateScrollbars(cm, op.barMeasure); }
+ if (op.updatedDisplay)
+ { setDocumentHeight(cm, op.barMeasure); }
+
+ if (op.selectionChanged) { restartBlink(cm); }
+
+ if (cm.state.focused && op.updateInput)
+ { cm.display.input.reset(op.typing); }
+ if (takeFocus) { ensureFocus(op.cm); }
+}
+
+function endOperation_finish(op) {
+ var cm = op.cm, display = cm.display, doc = cm.doc;
+
+ if (op.updatedDisplay) { postUpdateDisplay(cm, op.update); }
+
+ // Abort mouse wheel delta measurement, when scrolling explicitly
+ if (display.wheelStartX != null && (op.scrollTop != null || op.scrollLeft != null || op.scrollToPos))
+ { display.wheelStartX = display.wheelStartY = null; }
+
+ // Propagate the scroll position to the actual DOM scroller
+ if (op.scrollTop != null) { setScrollTop(cm, op.scrollTop, op.forceScroll); }
+
+ if (op.scrollLeft != null) { setScrollLeft(cm, op.scrollLeft, true, true); }
+ // If we need to scroll a specific position into view, do so.
+ if (op.scrollToPos) {
+ var rect = scrollPosIntoView(cm, clipPos(doc, op.scrollToPos.from),
+ clipPos(doc, op.scrollToPos.to), op.scrollToPos.margin);
+ maybeScrollWindow(cm, rect);
+ }
+
+ // Fire events for markers that are hidden/unidden by editing or
+ // undoing
+ var hidden = op.maybeHiddenMarkers, unhidden = op.maybeUnhiddenMarkers;
+ if (hidden) { for (var i = 0; i < hidden.length; ++i)
+ { if (!hidden[i].lines.length) { signal(hidden[i], "hide"); } } }
+ if (unhidden) { for (var i$1 = 0; i$1 < unhidden.length; ++i$1)
+ { if (unhidden[i$1].lines.length) { signal(unhidden[i$1], "unhide"); } } }
+
+ if (display.wrapper.offsetHeight)
+ { doc.scrollTop = cm.display.scroller.scrollTop; }
+
+ // Fire change events, and delayed event handlers
+ if (op.changeObjs)
+ { signal(cm, "changes", cm, op.changeObjs); }
+ if (op.update)
+ { op.update.finish(); }
+}
+
+// Run the given function in an operation
+function runInOp(cm, f) {
+ if (cm.curOp) { return f() }
+ startOperation(cm);
+ try { return f() }
+ finally { endOperation(cm); }
+}
+// Wraps a function in an operation. Returns the wrapped function.
+function operation(cm, f) {
+ return function() {
+ if (cm.curOp) { return f.apply(cm, arguments) }
+ startOperation(cm);
+ try { return f.apply(cm, arguments) }
+ finally { endOperation(cm); }
+ }
+}
+// Used to add methods to editor and doc instances, wrapping them in
+// operations.
+function methodOp(f) {
+ return function() {
+ if (this.curOp) { return f.apply(this, arguments) }
+ startOperation(this);
+ try { return f.apply(this, arguments) }
+ finally { endOperation(this); }
+ }
+}
+function docMethodOp(f) {
+ return function() {
+ var cm = this.cm;
+ if (!cm || cm.curOp) { return f.apply(this, arguments) }
+ startOperation(cm);
+ try { return f.apply(this, arguments) }
+ finally { endOperation(cm); }
+ }
+}
+
+// Updates the display.view data structure for a given change to the
+// document. From and to are in pre-change coordinates. Lendiff is
+// the amount of lines added or subtracted by the change. This is
+// used for changes that span multiple lines, or change the way
+// lines are divided into visual lines. regLineChange (below)
+// registers single-line changes.
+function regChange(cm, from, to, lendiff) {
+ if (from == null) { from = cm.doc.first; }
+ if (to == null) { to = cm.doc.first + cm.doc.size; }
+ if (!lendiff) { lendiff = 0; }
+
+ var display = cm.display;
+ if (lendiff && to < display.viewTo &&
+ (display.updateLineNumbers == null || display.updateLineNumbers > from))
+ { display.updateLineNumbers = from; }
+
+ cm.curOp.viewChanged = true;
+
+ if (from >= display.viewTo) { // Change after
+ if (sawCollapsedSpans && visualLineNo(cm.doc, from) < display.viewTo)
+ { resetView(cm); }
+ } else if (to <= display.viewFrom) { // Change before
+ if (sawCollapsedSpans && visualLineEndNo(cm.doc, to + lendiff) > display.viewFrom) {
+ resetView(cm);
+ } else {
+ display.viewFrom += lendiff;
+ display.viewTo += lendiff;
+ }
+ } else if (from <= display.viewFrom && to >= display.viewTo) { // Full overlap
+ resetView(cm);
+ } else if (from <= display.viewFrom) { // Top overlap
+ var cut = viewCuttingPoint(cm, to, to + lendiff, 1);
+ if (cut) {
+ display.view = display.view.slice(cut.index);
+ display.viewFrom = cut.lineN;
+ display.viewTo += lendiff;
+ } else {
+ resetView(cm);
+ }
+ } else if (to >= display.viewTo) { // Bottom overlap
+ var cut$1 = viewCuttingPoint(cm, from, from, -1);
+ if (cut$1) {
+ display.view = display.view.slice(0, cut$1.index);
+ display.viewTo = cut$1.lineN;
+ } else {
+ resetView(cm);
+ }
+ } else { // Gap in the middle
+ var cutTop = viewCuttingPoint(cm, from, from, -1);
+ var cutBot = viewCuttingPoint(cm, to, to + lendiff, 1);
+ if (cutTop && cutBot) {
+ display.view = display.view.slice(0, cutTop.index)
+ .concat(buildViewArray(cm, cutTop.lineN, cutBot.lineN))
+ .concat(display.view.slice(cutBot.index));
+ display.viewTo += lendiff;
+ } else {
+ resetView(cm);
+ }
+ }
+
+ var ext = display.externalMeasured;
+ if (ext) {
+ if (to < ext.lineN)
+ { ext.lineN += lendiff; }
+ else if (from < ext.lineN + ext.size)
+ { display.externalMeasured = null; }
+ }
+}
+
+// Register a change to a single line. Type must be one of "text",
+// "gutter", "class", "widget"
+function regLineChange(cm, line, type) {
+ cm.curOp.viewChanged = true;
+ var display = cm.display, ext = cm.display.externalMeasured;
+ if (ext && line >= ext.lineN && line < ext.lineN + ext.size)
+ { display.externalMeasured = null; }
+
+ if (line < display.viewFrom || line >= display.viewTo) { return }
+ var lineView = display.view[findViewIndex(cm, line)];
+ if (lineView.node == null) { return }
+ var arr = lineView.changes || (lineView.changes = []);
+ if (indexOf(arr, type) == -1) { arr.push(type); }
+}
+
+// Clear the view.
+function resetView(cm) {
+ cm.display.viewFrom = cm.display.viewTo = cm.doc.first;
+ cm.display.view = [];
+ cm.display.viewOffset = 0;
+}
+
+function viewCuttingPoint(cm, oldN, newN, dir) {
+ var index = findViewIndex(cm, oldN), diff, view = cm.display.view;
+ if (!sawCollapsedSpans || newN == cm.doc.first + cm.doc.size)
+ { return {index: index, lineN: newN} }
+ var n = cm.display.viewFrom;
+ for (var i = 0; i < index; i++)
+ { n += view[i].size; }
+ if (n != oldN) {
+ if (dir > 0) {
+ if (index == view.length - 1) { return null }
+ diff = (n + view[index].size) - oldN;
+ index++;
+ } else {
+ diff = n - oldN;
+ }
+ oldN += diff; newN += diff;
+ }
+ while (visualLineNo(cm.doc, newN) != newN) {
+ if (index == (dir < 0 ? 0 : view.length - 1)) { return null }
+ newN += dir * view[index - (dir < 0 ? 1 : 0)].size;
+ index += dir;
+ }
+ return {index: index, lineN: newN}
+}
+
+// Force the view to cover a given range, adding empty view element
+// or clipping off existing ones as needed.
+function adjustView(cm, from, to) {
+ var display = cm.display, view = display.view;
+ if (view.length == 0 || from >= display.viewTo || to <= display.viewFrom) {
+ display.view = buildViewArray(cm, from, to);
+ display.viewFrom = from;
+ } else {
+ if (display.viewFrom > from)
+ { display.view = buildViewArray(cm, from, display.viewFrom).concat(display.view); }
+ else if (display.viewFrom < from)
+ { display.view = display.view.slice(findViewIndex(cm, from)); }
+ display.viewFrom = from;
+ if (display.viewTo < to)
+ { display.view = display.view.concat(buildViewArray(cm, display.viewTo, to)); }
+ else if (display.viewTo > to)
+ { display.view = display.view.slice(0, findViewIndex(cm, to)); }
+ }
+ display.viewTo = to;
+}
+
+// Count the number of lines in the view whose DOM representation is
+// out of date (or nonexistent).
+function countDirtyView(cm) {
+ var view = cm.display.view, dirty = 0;
+ for (var i = 0; i < view.length; i++) {
+ var lineView = view[i];
+ if (!lineView.hidden && (!lineView.node || lineView.changes)) { ++dirty; }
+ }
+ return dirty
+}
+
+// HIGHLIGHT WORKER
+
+function startWorker(cm, time) {
+ if (cm.doc.highlightFrontier < cm.display.viewTo)
+ { cm.state.highlight.set(time, bind(highlightWorker, cm)); }
+}
+
+function highlightWorker(cm) {
+ var doc = cm.doc;
+ if (doc.highlightFrontier >= cm.display.viewTo) { return }
+ var end = +new Date + cm.options.workTime;
+ var context = getContextBefore(cm, doc.highlightFrontier);
+ var changedLines = [];
+
+ doc.iter(context.line, Math.min(doc.first + doc.size, cm.display.viewTo + 500), function (line) {
+ if (context.line >= cm.display.viewFrom) { // Visible
+ var oldStyles = line.styles;
+ var resetState = line.text.length > cm.options.maxHighlightLength ? copyState(doc.mode, context.state) : null;
+ var highlighted = highlightLine(cm, line, context, true);
+ if (resetState) { context.state = resetState; }
+ line.styles = highlighted.styles;
+ var oldCls = line.styleClasses, newCls = highlighted.classes;
+ if (newCls) { line.styleClasses = newCls; }
+ else if (oldCls) { line.styleClasses = null; }
+ var ischange = !oldStyles || oldStyles.length != line.styles.length ||
+ oldCls != newCls && (!oldCls || !newCls || oldCls.bgClass != newCls.bgClass || oldCls.textClass != newCls.textClass);
+ for (var i = 0; !ischange && i < oldStyles.length; ++i) { ischange = oldStyles[i] != line.styles[i]; }
+ if (ischange) { changedLines.push(context.line); }
+ line.stateAfter = context.save();
+ context.nextLine();
+ } else {
+ if (line.text.length <= cm.options.maxHighlightLength)
+ { processLine(cm, line.text, context); }
+ line.stateAfter = context.line % 5 == 0 ? context.save() : null;
+ context.nextLine();
+ }
+ if (+new Date > end) {
+ startWorker(cm, cm.options.workDelay);
+ return true
+ }
+ });
+ doc.highlightFrontier = context.line;
+ doc.modeFrontier = Math.max(doc.modeFrontier, context.line);
+ if (changedLines.length) { runInOp(cm, function () {
+ for (var i = 0; i < changedLines.length; i++)
+ { regLineChange(cm, changedLines[i], "text"); }
+ }); }
+}
+
+// DISPLAY DRAWING
+
+var DisplayUpdate = function(cm, viewport, force) {
+ var display = cm.display;
+
+ this.viewport = viewport;
+ // Store some values that we'll need later (but don't want to force a relayout for)
+ this.visible = visibleLines(display, cm.doc, viewport);
+ this.editorIsHidden = !display.wrapper.offsetWidth;
+ this.wrapperHeight = display.wrapper.clientHeight;
+ this.wrapperWidth = display.wrapper.clientWidth;
+ this.oldDisplayWidth = displayWidth(cm);
+ this.force = force;
+ this.dims = getDimensions(cm);
+ this.events = [];
+};
+
+DisplayUpdate.prototype.signal = function (emitter, type) {
+ if (hasHandler(emitter, type))
+ { this.events.push(arguments); }
+};
+DisplayUpdate.prototype.finish = function () {
+ var this$1 = this;
+
+ for (var i = 0; i < this.events.length; i++)
+ { signal.apply(null, this$1.events[i]); }
+};
+
+function maybeClipScrollbars(cm) {
+ var display = cm.display;
+ if (!display.scrollbarsClipped && display.scroller.offsetWidth) {
+ display.nativeBarWidth = display.scroller.offsetWidth - display.scroller.clientWidth;
+ display.heightForcer.style.height = scrollGap(cm) + "px";
+ display.sizer.style.marginBottom = -display.nativeBarWidth + "px";
+ display.sizer.style.borderRightWidth = scrollGap(cm) + "px";
+ display.scrollbarsClipped = true;
+ }
+}
+
+function selectionSnapshot(cm) {
+ if (cm.hasFocus()) { return null }
+ var active = activeElt();
+ if (!active || !contains(cm.display.lineDiv, active)) { return null }
+ var result = {activeElt: active};
+ if (window.getSelection) {
+ var sel = window.getSelection();
+ if (sel.anchorNode && sel.extend && contains(cm.display.lineDiv, sel.anchorNode)) {
+ result.anchorNode = sel.anchorNode;
+ result.anchorOffset = sel.anchorOffset;
+ result.focusNode = sel.focusNode;
+ result.focusOffset = sel.focusOffset;
+ }
+ }
+ return result
+}
+
+function restoreSelection(snapshot) {
+ if (!snapshot || !snapshot.activeElt || snapshot.activeElt == activeElt()) { return }
+ snapshot.activeElt.focus();
+ if (snapshot.anchorNode && contains(document.body, snapshot.anchorNode) && contains(document.body, snapshot.focusNode)) {
+ var sel = window.getSelection(), range$$1 = document.createRange();
+ range$$1.setEnd(snapshot.anchorNode, snapshot.anchorOffset);
+ range$$1.collapse(false);
+ sel.removeAllRanges();
+ sel.addRange(range$$1);
+ sel.extend(snapshot.focusNode, snapshot.focusOffset);
+ }
+}
+
+// Does the actual updating of the line display. Bails out
+// (returning false) when there is nothing to be done and forced is
+// false.
+function updateDisplayIfNeeded(cm, update) {
+ var display = cm.display, doc = cm.doc;
+
+ if (update.editorIsHidden) {
+ resetView(cm);
+ return false
+ }
+
+ // Bail out if the visible area is already rendered and nothing changed.
+ if (!update.force &&
+ update.visible.from >= display.viewFrom && update.visible.to <= display.viewTo &&
+ (display.updateLineNumbers == null || display.updateLineNumbers >= display.viewTo) &&
+ display.renderedView == display.view && countDirtyView(cm) == 0)
+ { return false }
+
+ if (maybeUpdateLineNumberWidth(cm)) {
+ resetView(cm);
+ update.dims = getDimensions(cm);
+ }
+
+ // Compute a suitable new viewport (from & to)
+ var end = doc.first + doc.size;
+ var from = Math.max(update.visible.from - cm.options.viewportMargin, doc.first);
+ var to = Math.min(end, update.visible.to + cm.options.viewportMargin);
+ if (display.viewFrom < from && from - display.viewFrom < 20) { from = Math.max(doc.first, display.viewFrom); }
+ if (display.viewTo > to && display.viewTo - to < 20) { to = Math.min(end, display.viewTo); }
+ if (sawCollapsedSpans) {
+ from = visualLineNo(cm.doc, from);
+ to = visualLineEndNo(cm.doc, to);
+ }
+
+ var different = from != display.viewFrom || to != display.viewTo ||
+ display.lastWrapHeight != update.wrapperHeight || display.lastWrapWidth != update.wrapperWidth;
+ adjustView(cm, from, to);
+
+ display.viewOffset = heightAtLine(getLine(cm.doc, display.viewFrom));
+ // Position the mover div to align with the current scroll position
+ cm.display.mover.style.top = display.viewOffset + "px";
+
+ var toUpdate = countDirtyView(cm);
+ if (!different && toUpdate == 0 && !update.force && display.renderedView == display.view &&
+ (display.updateLineNumbers == null || display.updateLineNumbers >= display.viewTo))
+ { return false }
+
+ // For big changes, we hide the enclosing element during the
+ // update, since that speeds up the operations on most browsers.
+ var selSnapshot = selectionSnapshot(cm);
+ if (toUpdate > 4) { display.lineDiv.style.display = "none"; }
+ patchDisplay(cm, display.updateLineNumbers, update.dims);
+ if (toUpdate > 4) { display.lineDiv.style.display = ""; }
+ display.renderedView = display.view;
+ // There might have been a widget with a focused element that got
+ // hidden or updated, if so re-focus it.
+ restoreSelection(selSnapshot);
+
+ // Prevent selection and cursors from interfering with the scroll
+ // width and height.
+ removeChildren(display.cursorDiv);
+ removeChildren(display.selectionDiv);
+ display.gutters.style.height = display.sizer.style.minHeight = 0;
+
+ if (different) {
+ display.lastWrapHeight = update.wrapperHeight;
+ display.lastWrapWidth = update.wrapperWidth;
+ startWorker(cm, 400);
+ }
+
+ display.updateLineNumbers = null;
+
+ return true
+}
+
+function postUpdateDisplay(cm, update) {
+ var viewport = update.viewport;
+
+ for (var first = true;; first = false) {
+ if (!first || !cm.options.lineWrapping || update.oldDisplayWidth == displayWidth(cm)) {
+ // Clip forced viewport to actual scrollable area.
+ if (viewport && viewport.top != null)
+ { viewport = {top: Math.min(cm.doc.height + paddingVert(cm.display) - displayHeight(cm), viewport.top)}; }
+ // Updated line heights might result in the drawn area not
+ // actually covering the viewport. Keep looping until it does.
+ update.visible = visibleLines(cm.display, cm.doc, viewport);
+ if (update.visible.from >= cm.display.viewFrom && update.visible.to <= cm.display.viewTo)
+ { break }
+ }
+ if (!updateDisplayIfNeeded(cm, update)) { break }
+ updateHeightsInViewport(cm);
+ var barMeasure = measureForScrollbars(cm);
+ updateSelection(cm);
+ updateScrollbars(cm, barMeasure);
+ setDocumentHeight(cm, barMeasure);
+ update.force = false;
+ }
+
+ update.signal(cm, "update", cm);
+ if (cm.display.viewFrom != cm.display.reportedViewFrom || cm.display.viewTo != cm.display.reportedViewTo) {
+ update.signal(cm, "viewportChange", cm, cm.display.viewFrom, cm.display.viewTo);
+ cm.display.reportedViewFrom = cm.display.viewFrom; cm.display.reportedViewTo = cm.display.viewTo;
+ }
+}
+
+function updateDisplaySimple(cm, viewport) {
+ var update = new DisplayUpdate(cm, viewport);
+ if (updateDisplayIfNeeded(cm, update)) {
+ updateHeightsInViewport(cm);
+ postUpdateDisplay(cm, update);
+ var barMeasure = measureForScrollbars(cm);
+ updateSelection(cm);
+ updateScrollbars(cm, barMeasure);
+ setDocumentHeight(cm, barMeasure);
+ update.finish();
+ }
+}
+
+// Sync the actual display DOM structure with display.view, removing
+// nodes for lines that are no longer in view, and creating the ones
+// that are not there yet, and updating the ones that are out of
+// date.
+function patchDisplay(cm, updateNumbersFrom, dims) {
+ var display = cm.display, lineNumbers = cm.options.lineNumbers;
+ var container = display.lineDiv, cur = container.firstChild;
+
+ function rm(node) {
+ var next = node.nextSibling;
+ // Works around a throw-scroll bug in OS X Webkit
+ if (webkit && mac && cm.display.currentWheelTarget == node)
+ { node.style.display = "none"; }
+ else
+ { node.parentNode.removeChild(node); }
+ return next
+ }
+
+ var view = display.view, lineN = display.viewFrom;
+ // Loop over the elements in the view, syncing cur (the DOM nodes
+ // in display.lineDiv) with the view as we go.
+ for (var i = 0; i < view.length; i++) {
+ var lineView = view[i];
+ if (lineView.hidden) {
+ } else if (!lineView.node || lineView.node.parentNode != container) { // Not drawn yet
+ var node = buildLineElement(cm, lineView, lineN, dims);
+ container.insertBefore(node, cur);
+ } else { // Already drawn
+ while (cur != lineView.node) { cur = rm(cur); }
+ var updateNumber = lineNumbers && updateNumbersFrom != null &&
+ updateNumbersFrom <= lineN && lineView.lineNumber;
+ if (lineView.changes) {
+ if (indexOf(lineView.changes, "gutter") > -1) { updateNumber = false; }
+ updateLineForChanges(cm, lineView, lineN, dims);
+ }
+ if (updateNumber) {
+ removeChildren(lineView.lineNumber);
+ lineView.lineNumber.appendChild(document.createTextNode(lineNumberFor(cm.options, lineN)));
+ }
+ cur = lineView.node.nextSibling;
+ }
+ lineN += lineView.size;
+ }
+ while (cur) { cur = rm(cur); }
+}
+
+function updateGutterSpace(cm) {
+ var width = cm.display.gutters.offsetWidth;
+ cm.display.sizer.style.marginLeft = width + "px";
+}
+
+function setDocumentHeight(cm, measure) {
+ cm.display.sizer.style.minHeight = measure.docHeight + "px";
+ cm.display.heightForcer.style.top = measure.docHeight + "px";
+ cm.display.gutters.style.height = (measure.docHeight + cm.display.barHeight + scrollGap(cm)) + "px";
+}
+
+// Rebuild the gutter elements, ensure the margin to the left of the
+// code matches their width.
+function updateGutters(cm) {
+ var gutters = cm.display.gutters, specs = cm.options.gutters;
+ removeChildren(gutters);
+ var i = 0;
+ for (; i < specs.length; ++i) {
+ var gutterClass = specs[i];
+ var gElt = gutters.appendChild(elt("div", null, "CodeMirror-gutter " + gutterClass));
+ if (gutterClass == "CodeMirror-linenumbers") {
+ cm.display.lineGutter = gElt;
+ gElt.style.width = (cm.display.lineNumWidth || 1) + "px";
+ }
+ }
+ gutters.style.display = i ? "" : "none";
+ updateGutterSpace(cm);
+}
+
+// Make sure the gutters options contains the element
+// "CodeMirror-linenumbers" when the lineNumbers option is true.
+function setGuttersForLineNumbers(options) {
+ var found = indexOf(options.gutters, "CodeMirror-linenumbers");
+ if (found == -1 && options.lineNumbers) {
+ options.gutters = options.gutters.concat(["CodeMirror-linenumbers"]);
+ } else if (found > -1 && !options.lineNumbers) {
+ options.gutters = options.gutters.slice(0);
+ options.gutters.splice(found, 1);
+ }
+}
+
+// Since the delta values reported on mouse wheel events are
+// unstandardized between browsers and even browser versions, and
+// generally horribly unpredictable, this code starts by measuring
+// the scroll effect that the first few mouse wheel events have,
+// and, from that, detects the way it can convert deltas to pixel
+// offsets afterwards.
+//
+// The reason we want to know the amount a wheel event will scroll
+// is that it gives us a chance to update the display before the
+// actual scrolling happens, reducing flickering.
+
+var wheelSamples = 0;
+var wheelPixelsPerUnit = null;
+// Fill in a browser-detected starting value on browsers where we
+// know one. These don't have to be accurate -- the result of them
+// being wrong would just be a slight flicker on the first wheel
+// scroll (if it is large enough).
+if (ie) { wheelPixelsPerUnit = -.53; }
+else if (gecko) { wheelPixelsPerUnit = 15; }
+else if (chrome) { wheelPixelsPerUnit = -.7; }
+else if (safari) { wheelPixelsPerUnit = -1/3; }
+
+function wheelEventDelta(e) {
+ var dx = e.wheelDeltaX, dy = e.wheelDeltaY;
+ if (dx == null && e.detail && e.axis == e.HORIZONTAL_AXIS) { dx = e.detail; }
+ if (dy == null && e.detail && e.axis == e.VERTICAL_AXIS) { dy = e.detail; }
+ else if (dy == null) { dy = e.wheelDelta; }
+ return {x: dx, y: dy}
+}
+function wheelEventPixels(e) {
+ var delta = wheelEventDelta(e);
+ delta.x *= wheelPixelsPerUnit;
+ delta.y *= wheelPixelsPerUnit;
+ return delta
+}
+
+function onScrollWheel(cm, e) {
+ var delta = wheelEventDelta(e), dx = delta.x, dy = delta.y;
+
+ var display = cm.display, scroll = display.scroller;
+ // Quit if there's nothing to scroll here
+ var canScrollX = scroll.scrollWidth > scroll.clientWidth;
+ var canScrollY = scroll.scrollHeight > scroll.clientHeight;
+ if (!(dx && canScrollX || dy && canScrollY)) { return }
+
+ // Webkit browsers on OS X abort momentum scrolls when the target
+ // of the scroll event is removed from the scrollable element.
+ // This hack (see related code in patchDisplay) makes sure the
+ // element is kept around.
+ if (dy && mac && webkit) {
+ outer: for (var cur = e.target, view = display.view; cur != scroll; cur = cur.parentNode) {
+ for (var i = 0; i < view.length; i++) {
+ if (view[i].node == cur) {
+ cm.display.currentWheelTarget = cur;
+ break outer
+ }
+ }
+ }
+ }
+
+ // On some browsers, horizontal scrolling will cause redraws to
+ // happen before the gutter has been realigned, causing it to
+ // wriggle around in a most unseemly way. When we have an
+ // estimated pixels/delta value, we just handle horizontal
+ // scrolling entirely here. It'll be slightly off from native, but
+ // better than glitching out.
+ if (dx && !gecko && !presto && wheelPixelsPerUnit != null) {
+ if (dy && canScrollY)
+ { updateScrollTop(cm, Math.max(0, scroll.scrollTop + dy * wheelPixelsPerUnit)); }
+ setScrollLeft(cm, Math.max(0, scroll.scrollLeft + dx * wheelPixelsPerUnit));
+ // Only prevent default scrolling if vertical scrolling is
+ // actually possible. Otherwise, it causes vertical scroll
+ // jitter on OSX trackpads when deltaX is small and deltaY
+ // is large (issue #3579)
+ if (!dy || (dy && canScrollY))
+ { e_preventDefault(e); }
+ display.wheelStartX = null; // Abort measurement, if in progress
+ return
+ }
+
+ // 'Project' the visible viewport to cover the area that is being
+ // scrolled into view (if we know enough to estimate it).
+ if (dy && wheelPixelsPerUnit != null) {
+ var pixels = dy * wheelPixelsPerUnit;
+ var top = cm.doc.scrollTop, bot = top + display.wrapper.clientHeight;
+ if (pixels < 0) { top = Math.max(0, top + pixels - 50); }
+ else { bot = Math.min(cm.doc.height, bot + pixels + 50); }
+ updateDisplaySimple(cm, {top: top, bottom: bot});
+ }
+
+ if (wheelSamples < 20) {
+ if (display.wheelStartX == null) {
+ display.wheelStartX = scroll.scrollLeft; display.wheelStartY = scroll.scrollTop;
+ display.wheelDX = dx; display.wheelDY = dy;
+ setTimeout(function () {
+ if (display.wheelStartX == null) { return }
+ var movedX = scroll.scrollLeft - display.wheelStartX;
+ var movedY = scroll.scrollTop - display.wheelStartY;
+ var sample = (movedY && display.wheelDY && movedY / display.wheelDY) ||
+ (movedX && display.wheelDX && movedX / display.wheelDX);
+ display.wheelStartX = display.wheelStartY = null;
+ if (!sample) { return }
+ wheelPixelsPerUnit = (wheelPixelsPerUnit * wheelSamples + sample) / (wheelSamples + 1);
+ ++wheelSamples;
+ }, 200);
+ } else {
+ display.wheelDX += dx; display.wheelDY += dy;
+ }
+ }
+}
+
+// Selection objects are immutable. A new one is created every time
+// the selection changes. A selection is one or more non-overlapping
+// (and non-touching) ranges, sorted, and an integer that indicates
+// which one is the primary selection (the one that's scrolled into
+// view, that getCursor returns, etc).
+var Selection = function(ranges, primIndex) {
+ this.ranges = ranges;
+ this.primIndex = primIndex;
+};
+
+Selection.prototype.primary = function () { return this.ranges[this.primIndex] };
+
+Selection.prototype.equals = function (other) {
+ var this$1 = this;
+
+ if (other == this) { return true }
+ if (other.primIndex != this.primIndex || other.ranges.length != this.ranges.length) { return false }
+ for (var i = 0; i < this.ranges.length; i++) {
+ var here = this$1.ranges[i], there = other.ranges[i];
+ if (!equalCursorPos(here.anchor, there.anchor) || !equalCursorPos(here.head, there.head)) { return false }
+ }
+ return true
+};
+
+Selection.prototype.deepCopy = function () {
+ var this$1 = this;
+
+ var out = [];
+ for (var i = 0; i < this.ranges.length; i++)
+ { out[i] = new Range(copyPos(this$1.ranges[i].anchor), copyPos(this$1.ranges[i].head)); }
+ return new Selection(out, this.primIndex)
+};
+
+Selection.prototype.somethingSelected = function () {
+ var this$1 = this;
+
+ for (var i = 0; i < this.ranges.length; i++)
+ { if (!this$1.ranges[i].empty()) { return true } }
+ return false
+};
+
+Selection.prototype.contains = function (pos, end) {
+ var this$1 = this;
+
+ if (!end) { end = pos; }
+ for (var i = 0; i < this.ranges.length; i++) {
+ var range = this$1.ranges[i];
+ if (cmp(end, range.from()) >= 0 && cmp(pos, range.to()) <= 0)
+ { return i }
+ }
+ return -1
+};
+
+var Range = function(anchor, head) {
+ this.anchor = anchor; this.head = head;
+};
+
+Range.prototype.from = function () { return minPos(this.anchor, this.head) };
+Range.prototype.to = function () { return maxPos(this.anchor, this.head) };
+Range.prototype.empty = function () { return this.head.line == this.anchor.line && this.head.ch == this.anchor.ch };
+
+// Take an unsorted, potentially overlapping set of ranges, and
+// build a selection out of it. 'Consumes' ranges array (modifying
+// it).
+function normalizeSelection(ranges, primIndex) {
+ var prim = ranges[primIndex];
+ ranges.sort(function (a, b) { return cmp(a.from(), b.from()); });
+ primIndex = indexOf(ranges, prim);
+ for (var i = 1; i < ranges.length; i++) {
+ var cur = ranges[i], prev = ranges[i - 1];
+ if (cmp(prev.to(), cur.from()) >= 0) {
+ var from = minPos(prev.from(), cur.from()), to = maxPos(prev.to(), cur.to());
+ var inv = prev.empty() ? cur.from() == cur.head : prev.from() == prev.head;
+ if (i <= primIndex) { --primIndex; }
+ ranges.splice(--i, 2, new Range(inv ? to : from, inv ? from : to));
+ }
+ }
+ return new Selection(ranges, primIndex)
+}
+
+function simpleSelection(anchor, head) {
+ return new Selection([new Range(anchor, head || anchor)], 0)
+}
+
+// Compute the position of the end of a change (its 'to' property
+// refers to the pre-change end).
+function changeEnd(change) {
+ if (!change.text) { return change.to }
+ return Pos(change.from.line + change.text.length - 1,
+ lst(change.text).length + (change.text.length == 1 ? change.from.ch : 0))
+}
+
+// Adjust a position to refer to the post-change position of the
+// same text, or the end of the change if the change covers it.
+function adjustForChange(pos, change) {
+ if (cmp(pos, change.from) < 0) { return pos }
+ if (cmp(pos, change.to) <= 0) { return changeEnd(change) }
+
+ var line = pos.line + change.text.length - (change.to.line - change.from.line) - 1, ch = pos.ch;
+ if (pos.line == change.to.line) { ch += changeEnd(change).ch - change.to.ch; }
+ return Pos(line, ch)
+}
+
+function computeSelAfterChange(doc, change) {
+ var out = [];
+ for (var i = 0; i < doc.sel.ranges.length; i++) {
+ var range = doc.sel.ranges[i];
+ out.push(new Range(adjustForChange(range.anchor, change),
+ adjustForChange(range.head, change)));
+ }
+ return normalizeSelection(out, doc.sel.primIndex)
+}
+
+function offsetPos(pos, old, nw) {
+ if (pos.line == old.line)
+ { return Pos(nw.line, pos.ch - old.ch + nw.ch) }
+ else
+ { return Pos(nw.line + (pos.line - old.line), pos.ch) }
+}
+
+// Used by replaceSelections to allow moving the selection to the
+// start or around the replaced test. Hint may be "start" or "around".
+function computeReplacedSel(doc, changes, hint) {
+ var out = [];
+ var oldPrev = Pos(doc.first, 0), newPrev = oldPrev;
+ for (var i = 0; i < changes.length; i++) {
+ var change = changes[i];
+ var from = offsetPos(change.from, oldPrev, newPrev);
+ var to = offsetPos(changeEnd(change), oldPrev, newPrev);
+ oldPrev = change.to;
+ newPrev = to;
+ if (hint == "around") {
+ var range = doc.sel.ranges[i], inv = cmp(range.head, range.anchor) < 0;
+ out[i] = new Range(inv ? to : from, inv ? from : to);
+ } else {
+ out[i] = new Range(from, from);
+ }
+ }
+ return new Selection(out, doc.sel.primIndex)
+}
+
+// Used to get the editor into a consistent state again when options change.
+
+function loadMode(cm) {
+ cm.doc.mode = getMode(cm.options, cm.doc.modeOption);
+ resetModeState(cm);
+}
+
+function resetModeState(cm) {
+ cm.doc.iter(function (line) {
+ if (line.stateAfter) { line.stateAfter = null; }
+ if (line.styles) { line.styles = null; }
+ });
+ cm.doc.modeFrontier = cm.doc.highlightFrontier = cm.doc.first;
+ startWorker(cm, 100);
+ cm.state.modeGen++;
+ if (cm.curOp) { regChange(cm); }
+}
+
+// DOCUMENT DATA STRUCTURE
+
+// By default, updates that start and end at the beginning of a line
+// are treated specially, in order to make the association of line
+// widgets and marker elements with the text behave more intuitive.
+function isWholeLineUpdate(doc, change) {
+ return change.from.ch == 0 && change.to.ch == 0 && lst(change.text) == "" &&
+ (!doc.cm || doc.cm.options.wholeLineUpdateBefore)
+}
+
+// Perform a change on the document data structure.
+function updateDoc(doc, change, markedSpans, estimateHeight$$1) {
+ function spansFor(n) {return markedSpans ? markedSpans[n] : null}
+ function update(line, text, spans) {
+ updateLine(line, text, spans, estimateHeight$$1);
+ signalLater(line, "change", line, change);
+ }
+ function linesFor(start, end) {
+ var result = [];
+ for (var i = start; i < end; ++i)
+ { result.push(new Line(text[i], spansFor(i), estimateHeight$$1)); }
+ return result
+ }
+
+ var from = change.from, to = change.to, text = change.text;
+ var firstLine = getLine(doc, from.line), lastLine = getLine(doc, to.line);
+ var lastText = lst(text), lastSpans = spansFor(text.length - 1), nlines = to.line - from.line;
+
+ // Adjust the line structure
+ if (change.full) {
+ doc.insert(0, linesFor(0, text.length));
+ doc.remove(text.length, doc.size - text.length);
+ } else if (isWholeLineUpdate(doc, change)) {
+ // This is a whole-line replace. Treated specially to make
+ // sure line objects move the way they are supposed to.
+ var added = linesFor(0, text.length - 1);
+ update(lastLine, lastLine.text, lastSpans);
+ if (nlines) { doc.remove(from.line, nlines); }
+ if (added.length) { doc.insert(from.line, added); }
+ } else if (firstLine == lastLine) {
+ if (text.length == 1) {
+ update(firstLine, firstLine.text.slice(0, from.ch) + lastText + firstLine.text.slice(to.ch), lastSpans);
+ } else {
+ var added$1 = linesFor(1, text.length - 1);
+ added$1.push(new Line(lastText + firstLine.text.slice(to.ch), lastSpans, estimateHeight$$1));
+ update(firstLine, firstLine.text.slice(0, from.ch) + text[0], spansFor(0));
+ doc.insert(from.line + 1, added$1);
+ }
+ } else if (text.length == 1) {
+ update(firstLine, firstLine.text.slice(0, from.ch) + text[0] + lastLine.text.slice(to.ch), spansFor(0));
+ doc.remove(from.line + 1, nlines);
+ } else {
+ update(firstLine, firstLine.text.slice(0, from.ch) + text[0], spansFor(0));
+ update(lastLine, lastText + lastLine.text.slice(to.ch), lastSpans);
+ var added$2 = linesFor(1, text.length - 1);
+ if (nlines > 1) { doc.remove(from.line + 1, nlines - 1); }
+ doc.insert(from.line + 1, added$2);
+ }
+
+ signalLater(doc, "change", doc, change);
+}
+
+// Call f for all linked documents.
+function linkedDocs(doc, f, sharedHistOnly) {
+ function propagate(doc, skip, sharedHist) {
+ if (doc.linked) { for (var i = 0; i < doc.linked.length; ++i) {
+ var rel = doc.linked[i];
+ if (rel.doc == skip) { continue }
+ var shared = sharedHist && rel.sharedHist;
+ if (sharedHistOnly && !shared) { continue }
+ f(rel.doc, shared);
+ propagate(rel.doc, doc, shared);
+ } }
+ }
+ propagate(doc, null, true);
+}
+
+// Attach a document to an editor.
+function attachDoc(cm, doc) {
+ if (doc.cm) { throw new Error("This document is already in use.") }
+ cm.doc = doc;
+ doc.cm = cm;
+ estimateLineHeights(cm);
+ loadMode(cm);
+ setDirectionClass(cm);
+ if (!cm.options.lineWrapping) { findMaxLine(cm); }
+ cm.options.mode = doc.modeOption;
+ regChange(cm);
+}
+
+function setDirectionClass(cm) {
+ (cm.doc.direction == "rtl" ? addClass : rmClass)(cm.display.lineDiv, "CodeMirror-rtl");
+}
+
+function directionChanged(cm) {
+ runInOp(cm, function () {
+ setDirectionClass(cm);
+ regChange(cm);
+ });
+}
+
+function History(startGen) {
+ // Arrays of change events and selections. Doing something adds an
+ // event to done and clears undo. Undoing moves events from done
+ // to undone, redoing moves them in the other direction.
+ this.done = []; this.undone = [];
+ this.undoDepth = Infinity;
+ // Used to track when changes can be merged into a single undo
+ // event
+ this.lastModTime = this.lastSelTime = 0;
+ this.lastOp = this.lastSelOp = null;
+ this.lastOrigin = this.lastSelOrigin = null;
+ // Used by the isClean() method
+ this.generation = this.maxGeneration = startGen || 1;
+}
+
+// Create a history change event from an updateDoc-style change
+// object.
+function historyChangeFromChange(doc, change) {
+ var histChange = {from: copyPos(change.from), to: changeEnd(change), text: getBetween(doc, change.from, change.to)};
+ attachLocalSpans(doc, histChange, change.from.line, change.to.line + 1);
+ linkedDocs(doc, function (doc) { return attachLocalSpans(doc, histChange, change.from.line, change.to.line + 1); }, true);
+ return histChange
+}
+
+// Pop all selection events off the end of a history array. Stop at
+// a change event.
+function clearSelectionEvents(array) {
+ while (array.length) {
+ var last = lst(array);
+ if (last.ranges) { array.pop(); }
+ else { break }
+ }
+}
+
+// Find the top change event in the history. Pop off selection
+// events that are in the way.
+function lastChangeEvent(hist, force) {
+ if (force) {
+ clearSelectionEvents(hist.done);
+ return lst(hist.done)
+ } else if (hist.done.length && !lst(hist.done).ranges) {
+ return lst(hist.done)
+ } else if (hist.done.length > 1 && !hist.done[hist.done.length - 2].ranges) {
+ hist.done.pop();
+ return lst(hist.done)
+ }
+}
+
+// Register a change in the history. Merges changes that are within
+// a single operation, or are close together with an origin that
+// allows merging (starting with "+") into a single event.
+function addChangeToHistory(doc, change, selAfter, opId) {
+ var hist = doc.history;
+ hist.undone.length = 0;
+ var time = +new Date, cur;
+ var last;
+
+ if ((hist.lastOp == opId ||
+ hist.lastOrigin == change.origin && change.origin &&
+ ((change.origin.charAt(0) == "+" && doc.cm && hist.lastModTime > time - doc.cm.options.historyEventDelay) ||
+ change.origin.charAt(0) == "*")) &&
+ (cur = lastChangeEvent(hist, hist.lastOp == opId))) {
+ // Merge this change into the last event
+ last = lst(cur.changes);
+ if (cmp(change.from, change.to) == 0 && cmp(change.from, last.to) == 0) {
+ // Optimized case for simple insertion -- don't want to add
+ // new changesets for every character typed
+ last.to = changeEnd(change);
+ } else {
+ // Add new sub-event
+ cur.changes.push(historyChangeFromChange(doc, change));
+ }
+ } else {
+ // Can not be merged, start a new event.
+ var before = lst(hist.done);
+ if (!before || !before.ranges)
+ { pushSelectionToHistory(doc.sel, hist.done); }
+ cur = {changes: [historyChangeFromChange(doc, change)],
+ generation: hist.generation};
+ hist.done.push(cur);
+ while (hist.done.length > hist.undoDepth) {
+ hist.done.shift();
+ if (!hist.done[0].ranges) { hist.done.shift(); }
+ }
+ }
+ hist.done.push(selAfter);
+ hist.generation = ++hist.maxGeneration;
+ hist.lastModTime = hist.lastSelTime = time;
+ hist.lastOp = hist.lastSelOp = opId;
+ hist.lastOrigin = hist.lastSelOrigin = change.origin;
+
+ if (!last) { signal(doc, "historyAdded"); }
+}
+
+function selectionEventCanBeMerged(doc, origin, prev, sel) {
+ var ch = origin.charAt(0);
+ return ch == "*" ||
+ ch == "+" &&
+ prev.ranges.length == sel.ranges.length &&
+ prev.somethingSelected() == sel.somethingSelected() &&
+ new Date - doc.history.lastSelTime <= (doc.cm ? doc.cm.options.historyEventDelay : 500)
+}
+
+// Called whenever the selection changes, sets the new selection as
+// the pending selection in the history, and pushes the old pending
+// selection into the 'done' array when it was significantly
+// different (in number of selected ranges, emptiness, or time).
+function addSelectionToHistory(doc, sel, opId, options) {
+ var hist = doc.history, origin = options && options.origin;
+
+ // A new event is started when the previous origin does not match
+ // the current, or the origins don't allow matching. Origins
+ // starting with * are always merged, those starting with + are
+ // merged when similar and close together in time.
+ if (opId == hist.lastSelOp ||
+ (origin && hist.lastSelOrigin == origin &&
+ (hist.lastModTime == hist.lastSelTime && hist.lastOrigin == origin ||
+ selectionEventCanBeMerged(doc, origin, lst(hist.done), sel))))
+ { hist.done[hist.done.length - 1] = sel; }
+ else
+ { pushSelectionToHistory(sel, hist.done); }
+
+ hist.lastSelTime = +new Date;
+ hist.lastSelOrigin = origin;
+ hist.lastSelOp = opId;
+ if (options && options.clearRedo !== false)
+ { clearSelectionEvents(hist.undone); }
+}
+
+function pushSelectionToHistory(sel, dest) {
+ var top = lst(dest);
+ if (!(top && top.ranges && top.equals(sel)))
+ { dest.push(sel); }
+}
+
+// Used to store marked span information in the history.
+function attachLocalSpans(doc, change, from, to) {
+ var existing = change["spans_" + doc.id], n = 0;
+ doc.iter(Math.max(doc.first, from), Math.min(doc.first + doc.size, to), function (line) {
+ if (line.markedSpans)
+ { (existing || (existing = change["spans_" + doc.id] = {}))[n] = line.markedSpans; }
+ ++n;
+ });
+}
+
+// When un/re-doing restores text containing marked spans, those
+// that have been explicitly cleared should not be restored.
+function removeClearedSpans(spans) {
+ if (!spans) { return null }
+ var out;
+ for (var i = 0; i < spans.length; ++i) {
+ if (spans[i].marker.explicitlyCleared) { if (!out) { out = spans.slice(0, i); } }
+ else if (out) { out.push(spans[i]); }
+ }
+ return !out ? spans : out.length ? out : null
+}
+
+// Retrieve and filter the old marked spans stored in a change event.
+function getOldSpans(doc, change) {
+ var found = change["spans_" + doc.id];
+ if (!found) { return null }
+ var nw = [];
+ for (var i = 0; i < change.text.length; ++i)
+ { nw.push(removeClearedSpans(found[i])); }
+ return nw
+}
+
+// Used for un/re-doing changes from the history. Combines the
+// result of computing the existing spans with the set of spans that
+// existed in the history (so that deleting around a span and then
+// undoing brings back the span).
+function mergeOldSpans(doc, change) {
+ var old = getOldSpans(doc, change);
+ var stretched = stretchSpansOverChange(doc, change);
+ if (!old) { return stretched }
+ if (!stretched) { return old }
+
+ for (var i = 0; i < old.length; ++i) {
+ var oldCur = old[i], stretchCur = stretched[i];
+ if (oldCur && stretchCur) {
+ spans: for (var j = 0; j < stretchCur.length; ++j) {
+ var span = stretchCur[j];
+ for (var k = 0; k < oldCur.length; ++k)
+ { if (oldCur[k].marker == span.marker) { continue spans } }
+ oldCur.push(span);
+ }
+ } else if (stretchCur) {
+ old[i] = stretchCur;
+ }
+ }
+ return old
+}
+
+// Used both to provide a JSON-safe object in .getHistory, and, when
+// detaching a document, to split the history in two
+function copyHistoryArray(events, newGroup, instantiateSel) {
+ var copy = [];
+ for (var i = 0; i < events.length; ++i) {
+ var event = events[i];
+ if (event.ranges) {
+ copy.push(instantiateSel ? Selection.prototype.deepCopy.call(event) : event);
+ continue
+ }
+ var changes = event.changes, newChanges = [];
+ copy.push({changes: newChanges});
+ for (var j = 0; j < changes.length; ++j) {
+ var change = changes[j], m = (void 0);
+ newChanges.push({from: change.from, to: change.to, text: change.text});
+ if (newGroup) { for (var prop in change) { if (m = prop.match(/^spans_(\d+)$/)) {
+ if (indexOf(newGroup, Number(m[1])) > -1) {
+ lst(newChanges)[prop] = change[prop];
+ delete change[prop];
+ }
+ } } }
+ }
+ }
+ return copy
+}
+
+// The 'scroll' parameter given to many of these indicated whether
+// the new cursor position should be scrolled into view after
+// modifying the selection.
+
+// If shift is held or the extend flag is set, extends a range to
+// include a given position (and optionally a second position).
+// Otherwise, simply returns the range between the given positions.
+// Used for cursor motion and such.
+function extendRange(range, head, other, extend) {
+ if (extend) {
+ var anchor = range.anchor;
+ if (other) {
+ var posBefore = cmp(head, anchor) < 0;
+ if (posBefore != (cmp(other, anchor) < 0)) {
+ anchor = head;
+ head = other;
+ } else if (posBefore != (cmp(head, other) < 0)) {
+ head = other;
+ }
+ }
+ return new Range(anchor, head)
+ } else {
+ return new Range(other || head, head)
+ }
+}
+
+// Extend the primary selection range, discard the rest.
+function extendSelection(doc, head, other, options, extend) {
+ if (extend == null) { extend = doc.cm && (doc.cm.display.shift || doc.extend); }
+ setSelection(doc, new Selection([extendRange(doc.sel.primary(), head, other, extend)], 0), options);
+}
+
+// Extend all selections (pos is an array of selections with length
+// equal the number of selections)
+function extendSelections(doc, heads, options) {
+ var out = [];
+ var extend = doc.cm && (doc.cm.display.shift || doc.extend);
+ for (var i = 0; i < doc.sel.ranges.length; i++)
+ { out[i] = extendRange(doc.sel.ranges[i], heads[i], null, extend); }
+ var newSel = normalizeSelection(out, doc.sel.primIndex);
+ setSelection(doc, newSel, options);
+}
+
+// Updates a single range in the selection.
+function replaceOneSelection(doc, i, range, options) {
+ var ranges = doc.sel.ranges.slice(0);
+ ranges[i] = range;
+ setSelection(doc, normalizeSelection(ranges, doc.sel.primIndex), options);
+}
+
+// Reset the selection to a single range.
+function setSimpleSelection(doc, anchor, head, options) {
+ setSelection(doc, simpleSelection(anchor, head), options);
+}
+
+// Give beforeSelectionChange handlers a change to influence a
+// selection update.
+function filterSelectionChange(doc, sel, options) {
+ var obj = {
+ ranges: sel.ranges,
+ update: function(ranges) {
+ var this$1 = this;
+
+ this.ranges = [];
+ for (var i = 0; i < ranges.length; i++)
+ { this$1.ranges[i] = new Range(clipPos(doc, ranges[i].anchor),
+ clipPos(doc, ranges[i].head)); }
+ },
+ origin: options && options.origin
+ };
+ signal(doc, "beforeSelectionChange", doc, obj);
+ if (doc.cm) { signal(doc.cm, "beforeSelectionChange", doc.cm, obj); }
+ if (obj.ranges != sel.ranges) { return normalizeSelection(obj.ranges, obj.ranges.length - 1) }
+ else { return sel }
+}
+
+function setSelectionReplaceHistory(doc, sel, options) {
+ var done = doc.history.done, last = lst(done);
+ if (last && last.ranges) {
+ done[done.length - 1] = sel;
+ setSelectionNoUndo(doc, sel, options);
+ } else {
+ setSelection(doc, sel, options);
+ }
+}
+
+// Set a new selection.
+function setSelection(doc, sel, options) {
+ setSelectionNoUndo(doc, sel, options);
+ addSelectionToHistory(doc, doc.sel, doc.cm ? doc.cm.curOp.id : NaN, options);
+}
+
+function setSelectionNoUndo(doc, sel, options) {
+ if (hasHandler(doc, "beforeSelectionChange") || doc.cm && hasHandler(doc.cm, "beforeSelectionChange"))
+ { sel = filterSelectionChange(doc, sel, options); }
+
+ var bias = options && options.bias ||
+ (cmp(sel.primary().head, doc.sel.primary().head) < 0 ? -1 : 1);
+ setSelectionInner(doc, skipAtomicInSelection(doc, sel, bias, true));
+
+ if (!(options && options.scroll === false) && doc.cm)
+ { ensureCursorVisible(doc.cm); }
+}
+
+function setSelectionInner(doc, sel) {
+ if (sel.equals(doc.sel)) { return }
+
+ doc.sel = sel;
+
+ if (doc.cm) {
+ doc.cm.curOp.updateInput = doc.cm.curOp.selectionChanged = true;
+ signalCursorActivity(doc.cm);
+ }
+ signalLater(doc, "cursorActivity", doc);
+}
+
+// Verify that the selection does not partially select any atomic
+// marked ranges.
+function reCheckSelection(doc) {
+ setSelectionInner(doc, skipAtomicInSelection(doc, doc.sel, null, false));
+}
+
+// Return a selection that does not partially select any atomic
+// ranges.
+function skipAtomicInSelection(doc, sel, bias, mayClear) {
+ var out;
+ for (var i = 0; i < sel.ranges.length; i++) {
+ var range = sel.ranges[i];
+ var old = sel.ranges.length == doc.sel.ranges.length && doc.sel.ranges[i];
+ var newAnchor = skipAtomic(doc, range.anchor, old && old.anchor, bias, mayClear);
+ var newHead = skipAtomic(doc, range.head, old && old.head, bias, mayClear);
+ if (out || newAnchor != range.anchor || newHead != range.head) {
+ if (!out) { out = sel.ranges.slice(0, i); }
+ out[i] = new Range(newAnchor, newHead);
+ }
+ }
+ return out ? normalizeSelection(out, sel.primIndex) : sel
+}
+
+function skipAtomicInner(doc, pos, oldPos, dir, mayClear) {
+ var line = getLine(doc, pos.line);
+ if (line.markedSpans) { for (var i = 0; i < line.markedSpans.length; ++i) {
+ var sp = line.markedSpans[i], m = sp.marker;
+ if ((sp.from == null || (m.inclusiveLeft ? sp.from <= pos.ch : sp.from < pos.ch)) &&
+ (sp.to == null || (m.inclusiveRight ? sp.to >= pos.ch : sp.to > pos.ch))) {
+ if (mayClear) {
+ signal(m, "beforeCursorEnter");
+ if (m.explicitlyCleared) {
+ if (!line.markedSpans) { break }
+ else {--i; continue}
+ }
+ }
+ if (!m.atomic) { continue }
+
+ if (oldPos) {
+ var near = m.find(dir < 0 ? 1 : -1), diff = (void 0);
+ if (dir < 0 ? m.inclusiveRight : m.inclusiveLeft)
+ { near = movePos(doc, near, -dir, near && near.line == pos.line ? line : null); }
+ if (near && near.line == pos.line && (diff = cmp(near, oldPos)) && (dir < 0 ? diff < 0 : diff > 0))
+ { return skipAtomicInner(doc, near, pos, dir, mayClear) }
+ }
+
+ var far = m.find(dir < 0 ? -1 : 1);
+ if (dir < 0 ? m.inclusiveLeft : m.inclusiveRight)
+ { far = movePos(doc, far, dir, far.line == pos.line ? line : null); }
+ return far ? skipAtomicInner(doc, far, pos, dir, mayClear) : null
+ }
+ } }
+ return pos
+}
+
+// Ensure a given position is not inside an atomic range.
+function skipAtomic(doc, pos, oldPos, bias, mayClear) {
+ var dir = bias || 1;
+ var found = skipAtomicInner(doc, pos, oldPos, dir, mayClear) ||
+ (!mayClear && skipAtomicInner(doc, pos, oldPos, dir, true)) ||
+ skipAtomicInner(doc, pos, oldPos, -dir, mayClear) ||
+ (!mayClear && skipAtomicInner(doc, pos, oldPos, -dir, true));
+ if (!found) {
+ doc.cantEdit = true;
+ return Pos(doc.first, 0)
+ }
+ return found
+}
+
+function movePos(doc, pos, dir, line) {
+ if (dir < 0 && pos.ch == 0) {
+ if (pos.line > doc.first) { return clipPos(doc, Pos(pos.line - 1)) }
+ else { return null }
+ } else if (dir > 0 && pos.ch == (line || getLine(doc, pos.line)).text.length) {
+ if (pos.line < doc.first + doc.size - 1) { return Pos(pos.line + 1, 0) }
+ else { return null }
+ } else {
+ return new Pos(pos.line, pos.ch + dir)
+ }
+}
+
+function selectAll(cm) {
+ cm.setSelection(Pos(cm.firstLine(), 0), Pos(cm.lastLine()), sel_dontScroll);
+}
+
+// UPDATING
+
+// Allow "beforeChange" event handlers to influence a change
+function filterChange(doc, change, update) {
+ var obj = {
+ canceled: false,
+ from: change.from,
+ to: change.to,
+ text: change.text,
+ origin: change.origin,
+ cancel: function () { return obj.canceled = true; }
+ };
+ if (update) { obj.update = function (from, to, text, origin) {
+ if (from) { obj.from = clipPos(doc, from); }
+ if (to) { obj.to = clipPos(doc, to); }
+ if (text) { obj.text = text; }
+ if (origin !== undefined) { obj.origin = origin; }
+ }; }
+ signal(doc, "beforeChange", doc, obj);
+ if (doc.cm) { signal(doc.cm, "beforeChange", doc.cm, obj); }
+
+ if (obj.canceled) { return null }
+ return {from: obj.from, to: obj.to, text: obj.text, origin: obj.origin}
+}
+
+// Apply a change to a document, and add it to the document's
+// history, and propagating it to all linked documents.
+function makeChange(doc, change, ignoreReadOnly) {
+ if (doc.cm) {
+ if (!doc.cm.curOp) { return operation(doc.cm, makeChange)(doc, change, ignoreReadOnly) }
+ if (doc.cm.state.suppressEdits) { return }
+ }
+
+ if (hasHandler(doc, "beforeChange") || doc.cm && hasHandler(doc.cm, "beforeChange")) {
+ change = filterChange(doc, change, true);
+ if (!change) { return }
+ }
+
+ // Possibly split or suppress the update based on the presence
+ // of read-only spans in its range.
+ var split = sawReadOnlySpans && !ignoreReadOnly && removeReadOnlyRanges(doc, change.from, change.to);
+ if (split) {
+ for (var i = split.length - 1; i >= 0; --i)
+ { makeChangeInner(doc, {from: split[i].from, to: split[i].to, text: i ? [""] : change.text, origin: change.origin}); }
+ } else {
+ makeChangeInner(doc, change);
+ }
+}
+
+function makeChangeInner(doc, change) {
+ if (change.text.length == 1 && change.text[0] == "" && cmp(change.from, change.to) == 0) { return }
+ var selAfter = computeSelAfterChange(doc, change);
+ addChangeToHistory(doc, change, selAfter, doc.cm ? doc.cm.curOp.id : NaN);
+
+ makeChangeSingleDoc(doc, change, selAfter, stretchSpansOverChange(doc, change));
+ var rebased = [];
+
+ linkedDocs(doc, function (doc, sharedHist) {
+ if (!sharedHist && indexOf(rebased, doc.history) == -1) {
+ rebaseHist(doc.history, change);
+ rebased.push(doc.history);
+ }
+ makeChangeSingleDoc(doc, change, null, stretchSpansOverChange(doc, change));
+ });
+}
+
+// Revert a change stored in a document's history.
+function makeChangeFromHistory(doc, type, allowSelectionOnly) {
+ if (doc.cm && doc.cm.state.suppressEdits && !allowSelectionOnly) { return }
+
+ var hist = doc.history, event, selAfter = doc.sel;
+ var source = type == "undo" ? hist.done : hist.undone, dest = type == "undo" ? hist.undone : hist.done;
+
+ // Verify that there is a useable event (so that ctrl-z won't
+ // needlessly clear selection events)
+ var i = 0;
+ for (; i < source.length; i++) {
+ event = source[i];
+ if (allowSelectionOnly ? event.ranges && !event.equals(doc.sel) : !event.ranges)
+ { break }
+ }
+ if (i == source.length) { return }
+ hist.lastOrigin = hist.lastSelOrigin = null;
+
+ for (;;) {
+ event = source.pop();
+ if (event.ranges) {
+ pushSelectionToHistory(event, dest);
+ if (allowSelectionOnly && !event.equals(doc.sel)) {
+ setSelection(doc, event, {clearRedo: false});
+ return
+ }
+ selAfter = event;
+ }
+ else { break }
+ }
+
+ // Build up a reverse change object to add to the opposite history
+ // stack (redo when undoing, and vice versa).
+ var antiChanges = [];
+ pushSelectionToHistory(selAfter, dest);
+ dest.push({changes: antiChanges, generation: hist.generation});
+ hist.generation = event.generation || ++hist.maxGeneration;
+
+ var filter = hasHandler(doc, "beforeChange") || doc.cm && hasHandler(doc.cm, "beforeChange");
+
+ var loop = function ( i ) {
+ var change = event.changes[i];
+ change.origin = type;
+ if (filter && !filterChange(doc, change, false)) {
+ source.length = 0;
+ return {}
+ }
+
+ antiChanges.push(historyChangeFromChange(doc, change));
+
+ var after = i ? computeSelAfterChange(doc, change) : lst(source);
+ makeChangeSingleDoc(doc, change, after, mergeOldSpans(doc, change));
+ if (!i && doc.cm) { doc.cm.scrollIntoView({from: change.from, to: changeEnd(change)}); }
+ var rebased = [];
+
+ // Propagate to the linked documents
+ linkedDocs(doc, function (doc, sharedHist) {
+ if (!sharedHist && indexOf(rebased, doc.history) == -1) {
+ rebaseHist(doc.history, change);
+ rebased.push(doc.history);
+ }
+ makeChangeSingleDoc(doc, change, null, mergeOldSpans(doc, change));
+ });
+ };
+
+ for (var i$1 = event.changes.length - 1; i$1 >= 0; --i$1) {
+ var returned = loop( i$1 );
+
+ if ( returned ) return returned.v;
+ }
+}
+
+// Sub-views need their line numbers shifted when text is added
+// above or below them in the parent document.
+function shiftDoc(doc, distance) {
+ if (distance == 0) { return }
+ doc.first += distance;
+ doc.sel = new Selection(map(doc.sel.ranges, function (range) { return new Range(
+ Pos(range.anchor.line + distance, range.anchor.ch),
+ Pos(range.head.line + distance, range.head.ch)
+ ); }), doc.sel.primIndex);
+ if (doc.cm) {
+ regChange(doc.cm, doc.first, doc.first - distance, distance);
+ for (var d = doc.cm.display, l = d.viewFrom; l < d.viewTo; l++)
+ { regLineChange(doc.cm, l, "gutter"); }
+ }
+}
+
+// More lower-level change function, handling only a single document
+// (not linked ones).
+function makeChangeSingleDoc(doc, change, selAfter, spans) {
+ if (doc.cm && !doc.cm.curOp)
+ { return operation(doc.cm, makeChangeSingleDoc)(doc, change, selAfter, spans) }
+
+ if (change.to.line < doc.first) {
+ shiftDoc(doc, change.text.length - 1 - (change.to.line - change.from.line));
+ return
+ }
+ if (change.from.line > doc.lastLine()) { return }
+
+ // Clip the change to the size of this doc
+ if (change.from.line < doc.first) {
+ var shift = change.text.length - 1 - (doc.first - change.from.line);
+ shiftDoc(doc, shift);
+ change = {from: Pos(doc.first, 0), to: Pos(change.to.line + shift, change.to.ch),
+ text: [lst(change.text)], origin: change.origin};
+ }
+ var last = doc.lastLine();
+ if (change.to.line > last) {
+ change = {from: change.from, to: Pos(last, getLine(doc, last).text.length),
+ text: [change.text[0]], origin: change.origin};
+ }
+
+ change.removed = getBetween(doc, change.from, change.to);
+
+ if (!selAfter) { selAfter = computeSelAfterChange(doc, change); }
+ if (doc.cm) { makeChangeSingleDocInEditor(doc.cm, change, spans); }
+ else { updateDoc(doc, change, spans); }
+ setSelectionNoUndo(doc, selAfter, sel_dontScroll);
+}
+
+// Handle the interaction of a change to a document with the editor
+// that this document is part of.
+function makeChangeSingleDocInEditor(cm, change, spans) {
+ var doc = cm.doc, display = cm.display, from = change.from, to = change.to;
+
+ var recomputeMaxLength = false, checkWidthStart = from.line;
+ if (!cm.options.lineWrapping) {
+ checkWidthStart = lineNo(visualLine(getLine(doc, from.line)));
+ doc.iter(checkWidthStart, to.line + 1, function (line) {
+ if (line == display.maxLine) {
+ recomputeMaxLength = true;
+ return true
+ }
+ });
+ }
+
+ if (doc.sel.contains(change.from, change.to) > -1)
+ { signalCursorActivity(cm); }
+
+ updateDoc(doc, change, spans, estimateHeight(cm));
+
+ if (!cm.options.lineWrapping) {
+ doc.iter(checkWidthStart, from.line + change.text.length, function (line) {
+ var len = lineLength(line);
+ if (len > display.maxLineLength) {
+ display.maxLine = line;
+ display.maxLineLength = len;
+ display.maxLineChanged = true;
+ recomputeMaxLength = false;
+ }
+ });
+ if (recomputeMaxLength) { cm.curOp.updateMaxLine = true; }
+ }
+
+ retreatFrontier(doc, from.line);
+ startWorker(cm, 400);
+
+ var lendiff = change.text.length - (to.line - from.line) - 1;
+ // Remember that these lines changed, for updating the display
+ if (change.full)
+ { regChange(cm); }
+ else if (from.line == to.line && change.text.length == 1 && !isWholeLineUpdate(cm.doc, change))
+ { regLineChange(cm, from.line, "text"); }
+ else
+ { regChange(cm, from.line, to.line + 1, lendiff); }
+
+ var changesHandler = hasHandler(cm, "changes"), changeHandler = hasHandler(cm, "change");
+ if (changeHandler || changesHandler) {
+ var obj = {
+ from: from, to: to,
+ text: change.text,
+ removed: change.removed,
+ origin: change.origin
+ };
+ if (changeHandler) { signalLater(cm, "change", cm, obj); }
+ if (changesHandler) { (cm.curOp.changeObjs || (cm.curOp.changeObjs = [])).push(obj); }
+ }
+ cm.display.selForContextMenu = null;
+}
+
+function replaceRange(doc, code, from, to, origin) {
+ if (!to) { to = from; }
+ if (cmp(to, from) < 0) { var assign;
+ (assign = [to, from], from = assign[0], to = assign[1], assign); }
+ if (typeof code == "string") { code = doc.splitLines(code); }
+ makeChange(doc, {from: from, to: to, text: code, origin: origin});
+}
+
+// Rebasing/resetting history to deal with externally-sourced changes
+
+function rebaseHistSelSingle(pos, from, to, diff) {
+ if (to < pos.line) {
+ pos.line += diff;
+ } else if (from < pos.line) {
+ pos.line = from;
+ pos.ch = 0;
+ }
+}
+
+// Tries to rebase an array of history events given a change in the
+// document. If the change touches the same lines as the event, the
+// event, and everything 'behind' it, is discarded. If the change is
+// before the event, the event's positions are updated. Uses a
+// copy-on-write scheme for the positions, to avoid having to
+// reallocate them all on every rebase, but also avoid problems with
+// shared position objects being unsafely updated.
+function rebaseHistArray(array, from, to, diff) {
+ for (var i = 0; i < array.length; ++i) {
+ var sub = array[i], ok = true;
+ if (sub.ranges) {
+ if (!sub.copied) { sub = array[i] = sub.deepCopy(); sub.copied = true; }
+ for (var j = 0; j < sub.ranges.length; j++) {
+ rebaseHistSelSingle(sub.ranges[j].anchor, from, to, diff);
+ rebaseHistSelSingle(sub.ranges[j].head, from, to, diff);
+ }
+ continue
+ }
+ for (var j$1 = 0; j$1 < sub.changes.length; ++j$1) {
+ var cur = sub.changes[j$1];
+ if (to < cur.from.line) {
+ cur.from = Pos(cur.from.line + diff, cur.from.ch);
+ cur.to = Pos(cur.to.line + diff, cur.to.ch);
+ } else if (from <= cur.to.line) {
+ ok = false;
+ break
+ }
+ }
+ if (!ok) {
+ array.splice(0, i + 1);
+ i = 0;
+ }
+ }
+}
+
+function rebaseHist(hist, change) {
+ var from = change.from.line, to = change.to.line, diff = change.text.length - (to - from) - 1;
+ rebaseHistArray(hist.done, from, to, diff);
+ rebaseHistArray(hist.undone, from, to, diff);
+}
+
+// Utility for applying a change to a line by handle or number,
+// returning the number and optionally registering the line as
+// changed.
+function changeLine(doc, handle, changeType, op) {
+ var no = handle, line = handle;
+ if (typeof handle == "number") { line = getLine(doc, clipLine(doc, handle)); }
+ else { no = lineNo(handle); }
+ if (no == null) { return null }
+ if (op(line, no) && doc.cm) { regLineChange(doc.cm, no, changeType); }
+ return line
+}
+
+// The document is represented as a BTree consisting of leaves, with
+// chunk of lines in them, and branches, with up to ten leaves or
+// other branch nodes below them. The top node is always a branch
+// node, and is the document object itself (meaning it has
+// additional methods and properties).
+//
+// All nodes have parent links. The tree is used both to go from
+// line numbers to line objects, and to go from objects to numbers.
+// It also indexes by height, and is used to convert between height
+// and line object, and to find the total height of the document.
+//
+// See also http://marijnhaverbeke.nl/blog/codemirror-line-tree.html
+
+function LeafChunk(lines) {
+ var this$1 = this;
+
+ this.lines = lines;
+ this.parent = null;
+ var height = 0;
+ for (var i = 0; i < lines.length; ++i) {
+ lines[i].parent = this$1;
+ height += lines[i].height;
+ }
+ this.height = height;
+}
+
+LeafChunk.prototype = {
+ chunkSize: function chunkSize() { return this.lines.length },
+
+ // Remove the n lines at offset 'at'.
+ removeInner: function removeInner(at, n) {
+ var this$1 = this;
+
+ for (var i = at, e = at + n; i < e; ++i) {
+ var line = this$1.lines[i];
+ this$1.height -= line.height;
+ cleanUpLine(line);
+ signalLater(line, "delete");
+ }
+ this.lines.splice(at, n);
+ },
+
+ // Helper used to collapse a small branch into a single leaf.
+ collapse: function collapse(lines) {
+ lines.push.apply(lines, this.lines);
+ },
+
+ // Insert the given array of lines at offset 'at', count them as
+ // having the given height.
+ insertInner: function insertInner(at, lines, height) {
+ var this$1 = this;
+
+ this.height += height;
+ this.lines = this.lines.slice(0, at).concat(lines).concat(this.lines.slice(at));
+ for (var i = 0; i < lines.length; ++i) { lines[i].parent = this$1; }
+ },
+
+ // Used to iterate over a part of the tree.
+ iterN: function iterN(at, n, op) {
+ var this$1 = this;
+
+ for (var e = at + n; at < e; ++at)
+ { if (op(this$1.lines[at])) { return true } }
+ }
+};
+
+function BranchChunk(children) {
+ var this$1 = this;
+
+ this.children = children;
+ var size = 0, height = 0;
+ for (var i = 0; i < children.length; ++i) {
+ var ch = children[i];
+ size += ch.chunkSize(); height += ch.height;
+ ch.parent = this$1;
+ }
+ this.size = size;
+ this.height = height;
+ this.parent = null;
+}
+
+BranchChunk.prototype = {
+ chunkSize: function chunkSize() { return this.size },
+
+ removeInner: function removeInner(at, n) {
+ var this$1 = this;
+
+ this.size -= n;
+ for (var i = 0; i < this.children.length; ++i) {
+ var child = this$1.children[i], sz = child.chunkSize();
+ if (at < sz) {
+ var rm = Math.min(n, sz - at), oldHeight = child.height;
+ child.removeInner(at, rm);
+ this$1.height -= oldHeight - child.height;
+ if (sz == rm) { this$1.children.splice(i--, 1); child.parent = null; }
+ if ((n -= rm) == 0) { break }
+ at = 0;
+ } else { at -= sz; }
+ }
+ // If the result is smaller than 25 lines, ensure that it is a
+ // single leaf node.
+ if (this.size - n < 25 &&
+ (this.children.length > 1 || !(this.children[0] instanceof LeafChunk))) {
+ var lines = [];
+ this.collapse(lines);
+ this.children = [new LeafChunk(lines)];
+ this.children[0].parent = this;
+ }
+ },
+
+ collapse: function collapse(lines) {
+ var this$1 = this;
+
+ for (var i = 0; i < this.children.length; ++i) { this$1.children[i].collapse(lines); }
+ },
+
+ insertInner: function insertInner(at, lines, height) {
+ var this$1 = this;
+
+ this.size += lines.length;
+ this.height += height;
+ for (var i = 0; i < this.children.length; ++i) {
+ var child = this$1.children[i], sz = child.chunkSize();
+ if (at <= sz) {
+ child.insertInner(at, lines, height);
+ if (child.lines && child.lines.length > 50) {
+ // To avoid memory thrashing when child.lines is huge (e.g. first view of a large file), it's never spliced.
+ // Instead, small slices are taken. They're taken in order because sequential memory accesses are fastest.
+ var remaining = child.lines.length % 25 + 25;
+ for (var pos = remaining; pos < child.lines.length;) {
+ var leaf = new LeafChunk(child.lines.slice(pos, pos += 25));
+ child.height -= leaf.height;
+ this$1.children.splice(++i, 0, leaf);
+ leaf.parent = this$1;
+ }
+ child.lines = child.lines.slice(0, remaining);
+ this$1.maybeSpill();
+ }
+ break
+ }
+ at -= sz;
+ }
+ },
+
+ // When a node has grown, check whether it should be split.
+ maybeSpill: function maybeSpill() {
+ if (this.children.length <= 10) { return }
+ var me = this;
+ do {
+ var spilled = me.children.splice(me.children.length - 5, 5);
+ var sibling = new BranchChunk(spilled);
+ if (!me.parent) { // Become the parent node
+ var copy = new BranchChunk(me.children);
+ copy.parent = me;
+ me.children = [copy, sibling];
+ me = copy;
+ } else {
+ me.size -= sibling.size;
+ me.height -= sibling.height;
+ var myIndex = indexOf(me.parent.children, me);
+ me.parent.children.splice(myIndex + 1, 0, sibling);
+ }
+ sibling.parent = me.parent;
+ } while (me.children.length > 10)
+ me.parent.maybeSpill();
+ },
+
+ iterN: function iterN(at, n, op) {
+ var this$1 = this;
+
+ for (var i = 0; i < this.children.length; ++i) {
+ var child = this$1.children[i], sz = child.chunkSize();
+ if (at < sz) {
+ var used = Math.min(n, sz - at);
+ if (child.iterN(at, used, op)) { return true }
+ if ((n -= used) == 0) { break }
+ at = 0;
+ } else { at -= sz; }
+ }
+ }
+};
+
+// Line widgets are block elements displayed above or below a line.
+
+var LineWidget = function(doc, node, options) {
+ var this$1 = this;
+
+ if (options) { for (var opt in options) { if (options.hasOwnProperty(opt))
+ { this$1[opt] = options[opt]; } } }
+ this.doc = doc;
+ this.node = node;
+};
+
+LineWidget.prototype.clear = function () {
+ var this$1 = this;
+
+ var cm = this.doc.cm, ws = this.line.widgets, line = this.line, no = lineNo(line);
+ if (no == null || !ws) { return }
+ for (var i = 0; i < ws.length; ++i) { if (ws[i] == this$1) { ws.splice(i--, 1); } }
+ if (!ws.length) { line.widgets = null; }
+ var height = widgetHeight(this);
+ updateLineHeight(line, Math.max(0, line.height - height));
+ if (cm) {
+ runInOp(cm, function () {
+ adjustScrollWhenAboveVisible(cm, line, -height);
+ regLineChange(cm, no, "widget");
+ });
+ signalLater(cm, "lineWidgetCleared", cm, this, no);
+ }
+};
+
+LineWidget.prototype.changed = function () {
+ var this$1 = this;
+
+ var oldH = this.height, cm = this.doc.cm, line = this.line;
+ this.height = null;
+ var diff = widgetHeight(this) - oldH;
+ if (!diff) { return }
+ updateLineHeight(line, line.height + diff);
+ if (cm) {
+ runInOp(cm, function () {
+ cm.curOp.forceUpdate = true;
+ adjustScrollWhenAboveVisible(cm, line, diff);
+ signalLater(cm, "lineWidgetChanged", cm, this$1, lineNo(line));
+ });
+ }
+};
+eventMixin(LineWidget);
+
+function adjustScrollWhenAboveVisible(cm, line, diff) {
+ if (heightAtLine(line) < ((cm.curOp && cm.curOp.scrollTop) || cm.doc.scrollTop))
+ { addToScrollTop(cm, diff); }
+}
+
+function addLineWidget(doc, handle, node, options) {
+ var widget = new LineWidget(doc, node, options);
+ var cm = doc.cm;
+ if (cm && widget.noHScroll) { cm.display.alignWidgets = true; }
+ changeLine(doc, handle, "widget", function (line) {
+ var widgets = line.widgets || (line.widgets = []);
+ if (widget.insertAt == null) { widgets.push(widget); }
+ else { widgets.splice(Math.min(widgets.length - 1, Math.max(0, widget.insertAt)), 0, widget); }
+ widget.line = line;
+ if (cm && !lineIsHidden(doc, line)) {
+ var aboveVisible = heightAtLine(line) < doc.scrollTop;
+ updateLineHeight(line, line.height + widgetHeight(widget));
+ if (aboveVisible) { addToScrollTop(cm, widget.height); }
+ cm.curOp.forceUpdate = true;
+ }
+ return true
+ });
+ signalLater(cm, "lineWidgetAdded", cm, widget, typeof handle == "number" ? handle : lineNo(handle));
+ return widget
+}
+
+// TEXTMARKERS
+
+// Created with markText and setBookmark methods. A TextMarker is a
+// handle that can be used to clear or find a marked position in the
+// document. Line objects hold arrays (markedSpans) containing
+// {from, to, marker} object pointing to such marker objects, and
+// indicating that such a marker is present on that line. Multiple
+// lines may point to the same marker when it spans across lines.
+// The spans will have null for their from/to properties when the
+// marker continues beyond the start/end of the line. Markers have
+// links back to the lines they currently touch.
+
+// Collapsed markers have unique ids, in order to be able to order
+// them, which is needed for uniquely determining an outer marker
+// when they overlap (they may nest, but not partially overlap).
+var nextMarkerId = 0;
+
+var TextMarker = function(doc, type) {
+ this.lines = [];
+ this.type = type;
+ this.doc = doc;
+ this.id = ++nextMarkerId;
+};
+
+// Clear the marker.
+TextMarker.prototype.clear = function () {
+ var this$1 = this;
+
+ if (this.explicitlyCleared) { return }
+ var cm = this.doc.cm, withOp = cm && !cm.curOp;
+ if (withOp) { startOperation(cm); }
+ if (hasHandler(this, "clear")) {
+ var found = this.find();
+ if (found) { signalLater(this, "clear", found.from, found.to); }
+ }
+ var min = null, max = null;
+ for (var i = 0; i < this.lines.length; ++i) {
+ var line = this$1.lines[i];
+ var span = getMarkedSpanFor(line.markedSpans, this$1);
+ if (cm && !this$1.collapsed) { regLineChange(cm, lineNo(line), "text"); }
+ else if (cm) {
+ if (span.to != null) { max = lineNo(line); }
+ if (span.from != null) { min = lineNo(line); }
+ }
+ line.markedSpans = removeMarkedSpan(line.markedSpans, span);
+ if (span.from == null && this$1.collapsed && !lineIsHidden(this$1.doc, line) && cm)
+ { updateLineHeight(line, textHeight(cm.display)); }
+ }
+ if (cm && this.collapsed && !cm.options.lineWrapping) { for (var i$1 = 0; i$1 < this.lines.length; ++i$1) {
+ var visual = visualLine(this$1.lines[i$1]), len = lineLength(visual);
+ if (len > cm.display.maxLineLength) {
+ cm.display.maxLine = visual;
+ cm.display.maxLineLength = len;
+ cm.display.maxLineChanged = true;
+ }
+ } }
+
+ if (min != null && cm && this.collapsed) { regChange(cm, min, max + 1); }
+ this.lines.length = 0;
+ this.explicitlyCleared = true;
+ if (this.atomic && this.doc.cantEdit) {
+ this.doc.cantEdit = false;
+ if (cm) { reCheckSelection(cm.doc); }
+ }
+ if (cm) { signalLater(cm, "markerCleared", cm, this, min, max); }
+ if (withOp) { endOperation(cm); }
+ if (this.parent) { this.parent.clear(); }
+};
+
+// Find the position of the marker in the document. Returns a {from,
+// to} object by default. Side can be passed to get a specific side
+// -- 0 (both), -1 (left), or 1 (right). When lineObj is true, the
+// Pos objects returned contain a line object, rather than a line
+// number (used to prevent looking up the same line twice).
+TextMarker.prototype.find = function (side, lineObj) {
+ var this$1 = this;
+
+ if (side == null && this.type == "bookmark") { side = 1; }
+ var from, to;
+ for (var i = 0; i < this.lines.length; ++i) {
+ var line = this$1.lines[i];
+ var span = getMarkedSpanFor(line.markedSpans, this$1);
+ if (span.from != null) {
+ from = Pos(lineObj ? line : lineNo(line), span.from);
+ if (side == -1) { return from }
+ }
+ if (span.to != null) {
+ to = Pos(lineObj ? line : lineNo(line), span.to);
+ if (side == 1) { return to }
+ }
+ }
+ return from && {from: from, to: to}
+};
+
+// Signals that the marker's widget changed, and surrounding layout
+// should be recomputed.
+TextMarker.prototype.changed = function () {
+ var this$1 = this;
+
+ var pos = this.find(-1, true), widget = this, cm = this.doc.cm;
+ if (!pos || !cm) { return }
+ runInOp(cm, function () {
+ var line = pos.line, lineN = lineNo(pos.line);
+ var view = findViewForLine(cm, lineN);
+ if (view) {
+ clearLineMeasurementCacheFor(view);
+ cm.curOp.selectionChanged = cm.curOp.forceUpdate = true;
+ }
+ cm.curOp.updateMaxLine = true;
+ if (!lineIsHidden(widget.doc, line) && widget.height != null) {
+ var oldHeight = widget.height;
+ widget.height = null;
+ var dHeight = widgetHeight(widget) - oldHeight;
+ if (dHeight)
+ { updateLineHeight(line, line.height + dHeight); }
+ }
+ signalLater(cm, "markerChanged", cm, this$1);
+ });
+};
+
+TextMarker.prototype.attachLine = function (line) {
+ if (!this.lines.length && this.doc.cm) {
+ var op = this.doc.cm.curOp;
+ if (!op.maybeHiddenMarkers || indexOf(op.maybeHiddenMarkers, this) == -1)
+ { (op.maybeUnhiddenMarkers || (op.maybeUnhiddenMarkers = [])).push(this); }
+ }
+ this.lines.push(line);
+};
+
+TextMarker.prototype.detachLine = function (line) {
+ this.lines.splice(indexOf(this.lines, line), 1);
+ if (!this.lines.length && this.doc.cm) {
+ var op = this.doc.cm.curOp;(op.maybeHiddenMarkers || (op.maybeHiddenMarkers = [])).push(this);
+ }
+};
+eventMixin(TextMarker);
+
+// Create a marker, wire it up to the right lines, and
+function markText(doc, from, to, options, type) {
+ // Shared markers (across linked documents) are handled separately
+ // (markTextShared will call out to this again, once per
+ // document).
+ if (options && options.shared) { return markTextShared(doc, from, to, options, type) }
+ // Ensure we are in an operation.
+ if (doc.cm && !doc.cm.curOp) { return operation(doc.cm, markText)(doc, from, to, options, type) }
+
+ var marker = new TextMarker(doc, type), diff = cmp(from, to);
+ if (options) { copyObj(options, marker, false); }
+ // Don't connect empty markers unless clearWhenEmpty is false
+ if (diff > 0 || diff == 0 && marker.clearWhenEmpty !== false)
+ { return marker }
+ if (marker.replacedWith) {
+ // Showing up as a widget implies collapsed (widget replaces text)
+ marker.collapsed = true;
+ marker.widgetNode = eltP("span", [marker.replacedWith], "CodeMirror-widget");
+ if (!options.handleMouseEvents) { marker.widgetNode.setAttribute("cm-ignore-events", "true"); }
+ if (options.insertLeft) { marker.widgetNode.insertLeft = true; }
+ }
+ if (marker.collapsed) {
+ if (conflictingCollapsedRange(doc, from.line, from, to, marker) ||
+ from.line != to.line && conflictingCollapsedRange(doc, to.line, from, to, marker))
+ { throw new Error("Inserting collapsed marker partially overlapping an existing one") }
+ seeCollapsedSpans();
+ }
+
+ if (marker.addToHistory)
+ { addChangeToHistory(doc, {from: from, to: to, origin: "markText"}, doc.sel, NaN); }
+
+ var curLine = from.line, cm = doc.cm, updateMaxLine;
+ doc.iter(curLine, to.line + 1, function (line) {
+ if (cm && marker.collapsed && !cm.options.lineWrapping && visualLine(line) == cm.display.maxLine)
+ { updateMaxLine = true; }
+ if (marker.collapsed && curLine != from.line) { updateLineHeight(line, 0); }
+ addMarkedSpan(line, new MarkedSpan(marker,
+ curLine == from.line ? from.ch : null,
+ curLine == to.line ? to.ch : null));
+ ++curLine;
+ });
+ // lineIsHidden depends on the presence of the spans, so needs a second pass
+ if (marker.collapsed) { doc.iter(from.line, to.line + 1, function (line) {
+ if (lineIsHidden(doc, line)) { updateLineHeight(line, 0); }
+ }); }
+
+ if (marker.clearOnEnter) { on(marker, "beforeCursorEnter", function () { return marker.clear(); }); }
+
+ if (marker.readOnly) {
+ seeReadOnlySpans();
+ if (doc.history.done.length || doc.history.undone.length)
+ { doc.clearHistory(); }
+ }
+ if (marker.collapsed) {
+ marker.id = ++nextMarkerId;
+ marker.atomic = true;
+ }
+ if (cm) {
+ // Sync editor state
+ if (updateMaxLine) { cm.curOp.updateMaxLine = true; }
+ if (marker.collapsed)
+ { regChange(cm, from.line, to.line + 1); }
+ else if (marker.className || marker.title || marker.startStyle || marker.endStyle || marker.css)
+ { for (var i = from.line; i <= to.line; i++) { regLineChange(cm, i, "text"); } }
+ if (marker.atomic) { reCheckSelection(cm.doc); }
+ signalLater(cm, "markerAdded", cm, marker);
+ }
+ return marker
+}
+
+// SHARED TEXTMARKERS
+
+// A shared marker spans multiple linked documents. It is
+// implemented as a meta-marker-object controlling multiple normal
+// markers.
+var SharedTextMarker = function(markers, primary) {
+ var this$1 = this;
+
+ this.markers = markers;
+ this.primary = primary;
+ for (var i = 0; i < markers.length; ++i)
+ { markers[i].parent = this$1; }
+};
+
+SharedTextMarker.prototype.clear = function () {
+ var this$1 = this;
+
+ if (this.explicitlyCleared) { return }
+ this.explicitlyCleared = true;
+ for (var i = 0; i < this.markers.length; ++i)
+ { this$1.markers[i].clear(); }
+ signalLater(this, "clear");
+};
+
+SharedTextMarker.prototype.find = function (side, lineObj) {
+ return this.primary.find(side, lineObj)
+};
+eventMixin(SharedTextMarker);
+
+function markTextShared(doc, from, to, options, type) {
+ options = copyObj(options);
+ options.shared = false;
+ var markers = [markText(doc, from, to, options, type)], primary = markers[0];
+ var widget = options.widgetNode;
+ linkedDocs(doc, function (doc) {
+ if (widget) { options.widgetNode = widget.cloneNode(true); }
+ markers.push(markText(doc, clipPos(doc, from), clipPos(doc, to), options, type));
+ for (var i = 0; i < doc.linked.length; ++i)
+ { if (doc.linked[i].isParent) { return } }
+ primary = lst(markers);
+ });
+ return new SharedTextMarker(markers, primary)
+}
+
+function findSharedMarkers(doc) {
+ return doc.findMarks(Pos(doc.first, 0), doc.clipPos(Pos(doc.lastLine())), function (m) { return m.parent; })
+}
+
+function copySharedMarkers(doc, markers) {
+ for (var i = 0; i < markers.length; i++) {
+ var marker = markers[i], pos = marker.find();
+ var mFrom = doc.clipPos(pos.from), mTo = doc.clipPos(pos.to);
+ if (cmp(mFrom, mTo)) {
+ var subMark = markText(doc, mFrom, mTo, marker.primary, marker.primary.type);
+ marker.markers.push(subMark);
+ subMark.parent = marker;
+ }
+ }
+}
+
+function detachSharedMarkers(markers) {
+ var loop = function ( i ) {
+ var marker = markers[i], linked = [marker.primary.doc];
+ linkedDocs(marker.primary.doc, function (d) { return linked.push(d); });
+ for (var j = 0; j < marker.markers.length; j++) {
+ var subMarker = marker.markers[j];
+ if (indexOf(linked, subMarker.doc) == -1) {
+ subMarker.parent = null;
+ marker.markers.splice(j--, 1);
+ }
+ }
+ };
+
+ for (var i = 0; i < markers.length; i++) loop( i );
+}
+
+var nextDocId = 0;
+var Doc = function(text, mode, firstLine, lineSep, direction) {
+ if (!(this instanceof Doc)) { return new Doc(text, mode, firstLine, lineSep, direction) }
+ if (firstLine == null) { firstLine = 0; }
+
+ BranchChunk.call(this, [new LeafChunk([new Line("", null)])]);
+ this.first = firstLine;
+ this.scrollTop = this.scrollLeft = 0;
+ this.cantEdit = false;
+ this.cleanGeneration = 1;
+ this.modeFrontier = this.highlightFrontier = firstLine;
+ var start = Pos(firstLine, 0);
+ this.sel = simpleSelection(start);
+ this.history = new History(null);
+ this.id = ++nextDocId;
+ this.modeOption = mode;
+ this.lineSep = lineSep;
+ this.direction = (direction == "rtl") ? "rtl" : "ltr";
+ this.extend = false;
+
+ if (typeof text == "string") { text = this.splitLines(text); }
+ updateDoc(this, {from: start, to: start, text: text});
+ setSelection(this, simpleSelection(start), sel_dontScroll);
+};
+
+Doc.prototype = createObj(BranchChunk.prototype, {
+ constructor: Doc,
+ // Iterate over the document. Supports two forms -- with only one
+ // argument, it calls that for each line in the document. With
+ // three, it iterates over the range given by the first two (with
+ // the second being non-inclusive).
+ iter: function(from, to, op) {
+ if (op) { this.iterN(from - this.first, to - from, op); }
+ else { this.iterN(this.first, this.first + this.size, from); }
+ },
+
+ // Non-public interface for adding and removing lines.
+ insert: function(at, lines) {
+ var height = 0;
+ for (var i = 0; i < lines.length; ++i) { height += lines[i].height; }
+ this.insertInner(at - this.first, lines, height);
+ },
+ remove: function(at, n) { this.removeInner(at - this.first, n); },
+
+ // From here, the methods are part of the public interface. Most
+ // are also available from CodeMirror (editor) instances.
+
+ getValue: function(lineSep) {
+ var lines = getLines(this, this.first, this.first + this.size);
+ if (lineSep === false) { return lines }
+ return lines.join(lineSep || this.lineSeparator())
+ },
+ setValue: docMethodOp(function(code) {
+ var top = Pos(this.first, 0), last = this.first + this.size - 1;
+ makeChange(this, {from: top, to: Pos(last, getLine(this, last).text.length),
+ text: this.splitLines(code), origin: "setValue", full: true}, true);
+ if (this.cm) { scrollToCoords(this.cm, 0, 0); }
+ setSelection(this, simpleSelection(top), sel_dontScroll);
+ }),
+ replaceRange: function(code, from, to, origin) {
+ from = clipPos(this, from);
+ to = to ? clipPos(this, to) : from;
+ replaceRange(this, code, from, to, origin);
+ },
+ getRange: function(from, to, lineSep) {
+ var lines = getBetween(this, clipPos(this, from), clipPos(this, to));
+ if (lineSep === false) { return lines }
+ return lines.join(lineSep || this.lineSeparator())
+ },
+
+ getLine: function(line) {var l = this.getLineHandle(line); return l && l.text},
+
+ getLineHandle: function(line) {if (isLine(this, line)) { return getLine(this, line) }},
+ getLineNumber: function(line) {return lineNo(line)},
+
+ getLineHandleVisualStart: function(line) {
+ if (typeof line == "number") { line = getLine(this, line); }
+ return visualLine(line)
+ },
+
+ lineCount: function() {return this.size},
+ firstLine: function() {return this.first},
+ lastLine: function() {return this.first + this.size - 1},
+
+ clipPos: function(pos) {return clipPos(this, pos)},
+
+ getCursor: function(start) {
+ var range$$1 = this.sel.primary(), pos;
+ if (start == null || start == "head") { pos = range$$1.head; }
+ else if (start == "anchor") { pos = range$$1.anchor; }
+ else if (start == "end" || start == "to" || start === false) { pos = range$$1.to(); }
+ else { pos = range$$1.from(); }
+ return pos
+ },
+ listSelections: function() { return this.sel.ranges },
+ somethingSelected: function() {return this.sel.somethingSelected()},
+
+ setCursor: docMethodOp(function(line, ch, options) {
+ setSimpleSelection(this, clipPos(this, typeof line == "number" ? Pos(line, ch || 0) : line), null, options);
+ }),
+ setSelection: docMethodOp(function(anchor, head, options) {
+ setSimpleSelection(this, clipPos(this, anchor), clipPos(this, head || anchor), options);
+ }),
+ extendSelection: docMethodOp(function(head, other, options) {
+ extendSelection(this, clipPos(this, head), other && clipPos(this, other), options);
+ }),
+ extendSelections: docMethodOp(function(heads, options) {
+ extendSelections(this, clipPosArray(this, heads), options);
+ }),
+ extendSelectionsBy: docMethodOp(function(f, options) {
+ var heads = map(this.sel.ranges, f);
+ extendSelections(this, clipPosArray(this, heads), options);
+ }),
+ setSelections: docMethodOp(function(ranges, primary, options) {
+ var this$1 = this;
+
+ if (!ranges.length) { return }
+ var out = [];
+ for (var i = 0; i < ranges.length; i++)
+ { out[i] = new Range(clipPos(this$1, ranges[i].anchor),
+ clipPos(this$1, ranges[i].head)); }
+ if (primary == null) { primary = Math.min(ranges.length - 1, this.sel.primIndex); }
+ setSelection(this, normalizeSelection(out, primary), options);
+ }),
+ addSelection: docMethodOp(function(anchor, head, options) {
+ var ranges = this.sel.ranges.slice(0);
+ ranges.push(new Range(clipPos(this, anchor), clipPos(this, head || anchor)));
+ setSelection(this, normalizeSelection(ranges, ranges.length - 1), options);
+ }),
+
+ getSelection: function(lineSep) {
+ var this$1 = this;
+
+ var ranges = this.sel.ranges, lines;
+ for (var i = 0; i < ranges.length; i++) {
+ var sel = getBetween(this$1, ranges[i].from(), ranges[i].to());
+ lines = lines ? lines.concat(sel) : sel;
+ }
+ if (lineSep === false) { return lines }
+ else { return lines.join(lineSep || this.lineSeparator()) }
+ },
+ getSelections: function(lineSep) {
+ var this$1 = this;
+
+ var parts = [], ranges = this.sel.ranges;
+ for (var i = 0; i < ranges.length; i++) {
+ var sel = getBetween(this$1, ranges[i].from(), ranges[i].to());
+ if (lineSep !== false) { sel = sel.join(lineSep || this$1.lineSeparator()); }
+ parts[i] = sel;
+ }
+ return parts
+ },
+ replaceSelection: function(code, collapse, origin) {
+ var dup = [];
+ for (var i = 0; i < this.sel.ranges.length; i++)
+ { dup[i] = code; }
+ this.replaceSelections(dup, collapse, origin || "+input");
+ },
+ replaceSelections: docMethodOp(function(code, collapse, origin) {
+ var this$1 = this;
+
+ var changes = [], sel = this.sel;
+ for (var i = 0; i < sel.ranges.length; i++) {
+ var range$$1 = sel.ranges[i];
+ changes[i] = {from: range$$1.from(), to: range$$1.to(), text: this$1.splitLines(code[i]), origin: origin};
+ }
+ var newSel = collapse && collapse != "end" && computeReplacedSel(this, changes, collapse);
+ for (var i$1 = changes.length - 1; i$1 >= 0; i$1--)
+ { makeChange(this$1, changes[i$1]); }
+ if (newSel) { setSelectionReplaceHistory(this, newSel); }
+ else if (this.cm) { ensureCursorVisible(this.cm); }
+ }),
+ undo: docMethodOp(function() {makeChangeFromHistory(this, "undo");}),
+ redo: docMethodOp(function() {makeChangeFromHistory(this, "redo");}),
+ undoSelection: docMethodOp(function() {makeChangeFromHistory(this, "undo", true);}),
+ redoSelection: docMethodOp(function() {makeChangeFromHistory(this, "redo", true);}),
+
+ setExtending: function(val) {this.extend = val;},
+ getExtending: function() {return this.extend},
+
+ historySize: function() {
+ var hist = this.history, done = 0, undone = 0;
+ for (var i = 0; i < hist.done.length; i++) { if (!hist.done[i].ranges) { ++done; } }
+ for (var i$1 = 0; i$1 < hist.undone.length; i$1++) { if (!hist.undone[i$1].ranges) { ++undone; } }
+ return {undo: done, redo: undone}
+ },
+ clearHistory: function() {this.history = new History(this.history.maxGeneration);},
+
+ markClean: function() {
+ this.cleanGeneration = this.changeGeneration(true);
+ },
+ changeGeneration: function(forceSplit) {
+ if (forceSplit)
+ { this.history.lastOp = this.history.lastSelOp = this.history.lastOrigin = null; }
+ return this.history.generation
+ },
+ isClean: function (gen) {
+ return this.history.generation == (gen || this.cleanGeneration)
+ },
+
+ getHistory: function() {
+ return {done: copyHistoryArray(this.history.done),
+ undone: copyHistoryArray(this.history.undone)}
+ },
+ setHistory: function(histData) {
+ var hist = this.history = new History(this.history.maxGeneration);
+ hist.done = copyHistoryArray(histData.done.slice(0), null, true);
+ hist.undone = copyHistoryArray(histData.undone.slice(0), null, true);
+ },
+
+ setGutterMarker: docMethodOp(function(line, gutterID, value) {
+ return changeLine(this, line, "gutter", function (line) {
+ var markers = line.gutterMarkers || (line.gutterMarkers = {});
+ markers[gutterID] = value;
+ if (!value && isEmpty(markers)) { line.gutterMarkers = null; }
+ return true
+ })
+ }),
+
+ clearGutter: docMethodOp(function(gutterID) {
+ var this$1 = this;
+
+ this.iter(function (line) {
+ if (line.gutterMarkers && line.gutterMarkers[gutterID]) {
+ changeLine(this$1, line, "gutter", function () {
+ line.gutterMarkers[gutterID] = null;
+ if (isEmpty(line.gutterMarkers)) { line.gutterMarkers = null; }
+ return true
+ });
+ }
+ });
+ }),
+
+ lineInfo: function(line) {
+ var n;
+ if (typeof line == "number") {
+ if (!isLine(this, line)) { return null }
+ n = line;
+ line = getLine(this, line);
+ if (!line) { return null }
+ } else {
+ n = lineNo(line);
+ if (n == null) { return null }
+ }
+ return {line: n, handle: line, text: line.text, gutterMarkers: line.gutterMarkers,
+ textClass: line.textClass, bgClass: line.bgClass, wrapClass: line.wrapClass,
+ widgets: line.widgets}
+ },
+
+ addLineClass: docMethodOp(function(handle, where, cls) {
+ return changeLine(this, handle, where == "gutter" ? "gutter" : "class", function (line) {
+ var prop = where == "text" ? "textClass"
+ : where == "background" ? "bgClass"
+ : where == "gutter" ? "gutterClass" : "wrapClass";
+ if (!line[prop]) { line[prop] = cls; }
+ else if (classTest(cls).test(line[prop])) { return false }
+ else { line[prop] += " " + cls; }
+ return true
+ })
+ }),
+ removeLineClass: docMethodOp(function(handle, where, cls) {
+ return changeLine(this, handle, where == "gutter" ? "gutter" : "class", function (line) {
+ var prop = where == "text" ? "textClass"
+ : where == "background" ? "bgClass"
+ : where == "gutter" ? "gutterClass" : "wrapClass";
+ var cur = line[prop];
+ if (!cur) { return false }
+ else if (cls == null) { line[prop] = null; }
+ else {
+ var found = cur.match(classTest(cls));
+ if (!found) { return false }
+ var end = found.index + found[0].length;
+ line[prop] = cur.slice(0, found.index) + (!found.index || end == cur.length ? "" : " ") + cur.slice(end) || null;
+ }
+ return true
+ })
+ }),
+
+ addLineWidget: docMethodOp(function(handle, node, options) {
+ return addLineWidget(this, handle, node, options)
+ }),
+ removeLineWidget: function(widget) { widget.clear(); },
+
+ markText: function(from, to, options) {
+ return markText(this, clipPos(this, from), clipPos(this, to), options, options && options.type || "range")
+ },
+ setBookmark: function(pos, options) {
+ var realOpts = {replacedWith: options && (options.nodeType == null ? options.widget : options),
+ insertLeft: options && options.insertLeft,
+ clearWhenEmpty: false, shared: options && options.shared,
+ handleMouseEvents: options && options.handleMouseEvents};
+ pos = clipPos(this, pos);
+ return markText(this, pos, pos, realOpts, "bookmark")
+ },
+ findMarksAt: function(pos) {
+ pos = clipPos(this, pos);
+ var markers = [], spans = getLine(this, pos.line).markedSpans;
+ if (spans) { for (var i = 0; i < spans.length; ++i) {
+ var span = spans[i];
+ if ((span.from == null || span.from <= pos.ch) &&
+ (span.to == null || span.to >= pos.ch))
+ { markers.push(span.marker.parent || span.marker); }
+ } }
+ return markers
+ },
+ findMarks: function(from, to, filter) {
+ from = clipPos(this, from); to = clipPos(this, to);
+ var found = [], lineNo$$1 = from.line;
+ this.iter(from.line, to.line + 1, function (line) {
+ var spans = line.markedSpans;
+ if (spans) { for (var i = 0; i < spans.length; i++) {
+ var span = spans[i];
+ if (!(span.to != null && lineNo$$1 == from.line && from.ch >= span.to ||
+ span.from == null && lineNo$$1 != from.line ||
+ span.from != null && lineNo$$1 == to.line && span.from >= to.ch) &&
+ (!filter || filter(span.marker)))
+ { found.push(span.marker.parent || span.marker); }
+ } }
+ ++lineNo$$1;
+ });
+ return found
+ },
+ getAllMarks: function() {
+ var markers = [];
+ this.iter(function (line) {
+ var sps = line.markedSpans;
+ if (sps) { for (var i = 0; i < sps.length; ++i)
+ { if (sps[i].from != null) { markers.push(sps[i].marker); } } }
+ });
+ return markers
+ },
+
+ posFromIndex: function(off) {
+ var ch, lineNo$$1 = this.first, sepSize = this.lineSeparator().length;
+ this.iter(function (line) {
+ var sz = line.text.length + sepSize;
+ if (sz > off) { ch = off; return true }
+ off -= sz;
+ ++lineNo$$1;
+ });
+ return clipPos(this, Pos(lineNo$$1, ch))
+ },
+ indexFromPos: function (coords) {
+ coords = clipPos(this, coords);
+ var index = coords.ch;
+ if (coords.line < this.first || coords.ch < 0) { return 0 }
+ var sepSize = this.lineSeparator().length;
+ this.iter(this.first, coords.line, function (line) { // iter aborts when callback returns a truthy value
+ index += line.text.length + sepSize;
+ });
+ return index
+ },
+
+ copy: function(copyHistory) {
+ var doc = new Doc(getLines(this, this.first, this.first + this.size),
+ this.modeOption, this.first, this.lineSep, this.direction);
+ doc.scrollTop = this.scrollTop; doc.scrollLeft = this.scrollLeft;
+ doc.sel = this.sel;
+ doc.extend = false;
+ if (copyHistory) {
+ doc.history.undoDepth = this.history.undoDepth;
+ doc.setHistory(this.getHistory());
+ }
+ return doc
+ },
+
+ linkedDoc: function(options) {
+ if (!options) { options = {}; }
+ var from = this.first, to = this.first + this.size;
+ if (options.from != null && options.from > from) { from = options.from; }
+ if (options.to != null && options.to < to) { to = options.to; }
+ var copy = new Doc(getLines(this, from, to), options.mode || this.modeOption, from, this.lineSep, this.direction);
+ if (options.sharedHist) { copy.history = this.history
+ ; }(this.linked || (this.linked = [])).push({doc: copy, sharedHist: options.sharedHist});
+ copy.linked = [{doc: this, isParent: true, sharedHist: options.sharedHist}];
+ copySharedMarkers(copy, findSharedMarkers(this));
+ return copy
+ },
+ unlinkDoc: function(other) {
+ var this$1 = this;
+
+ if (other instanceof CodeMirror$1) { other = other.doc; }
+ if (this.linked) { for (var i = 0; i < this.linked.length; ++i) {
+ var link = this$1.linked[i];
+ if (link.doc != other) { continue }
+ this$1.linked.splice(i, 1);
+ other.unlinkDoc(this$1);
+ detachSharedMarkers(findSharedMarkers(this$1));
+ break
+ } }
+ // If the histories were shared, split them again
+ if (other.history == this.history) {
+ var splitIds = [other.id];
+ linkedDocs(other, function (doc) { return splitIds.push(doc.id); }, true);
+ other.history = new History(null);
+ other.history.done = copyHistoryArray(this.history.done, splitIds);
+ other.history.undone = copyHistoryArray(this.history.undone, splitIds);
+ }
+ },
+ iterLinkedDocs: function(f) {linkedDocs(this, f);},
+
+ getMode: function() {return this.mode},
+ getEditor: function() {return this.cm},
+
+ splitLines: function(str) {
+ if (this.lineSep) { return str.split(this.lineSep) }
+ return splitLinesAuto(str)
+ },
+ lineSeparator: function() { return this.lineSep || "\n" },
+
+ setDirection: docMethodOp(function (dir) {
+ if (dir != "rtl") { dir = "ltr"; }
+ if (dir == this.direction) { return }
+ this.direction = dir;
+ this.iter(function (line) { return line.order = null; });
+ if (this.cm) { directionChanged(this.cm); }
+ })
+});
+
+// Public alias.
+Doc.prototype.eachLine = Doc.prototype.iter;
+
+// Kludge to work around strange IE behavior where it'll sometimes
+// re-fire a series of drag-related events right after the drop (#1551)
+var lastDrop = 0;
+
+function onDrop(e) {
+ var cm = this;
+ clearDragCursor(cm);
+ if (signalDOMEvent(cm, e) || eventInWidget(cm.display, e))
+ { return }
+ e_preventDefault(e);
+ if (ie) { lastDrop = +new Date; }
+ var pos = posFromMouse(cm, e, true), files = e.dataTransfer.files;
+ if (!pos || cm.isReadOnly()) { return }
+ // Might be a file drop, in which case we simply extract the text
+ // and insert it.
+ if (files && files.length && window.FileReader && window.File) {
+ var n = files.length, text = Array(n), read = 0;
+ var loadFile = function (file, i) {
+ if (cm.options.allowDropFileTypes &&
+ indexOf(cm.options.allowDropFileTypes, file.type) == -1)
+ { return }
+
+ var reader = new FileReader;
+ reader.onload = operation(cm, function () {
+ var content = reader.result;
+ if (/[\x00-\x08\x0e-\x1f]{2}/.test(content)) { content = ""; }
+ text[i] = content;
+ if (++read == n) {
+ pos = clipPos(cm.doc, pos);
+ var change = {from: pos, to: pos,
+ text: cm.doc.splitLines(text.join(cm.doc.lineSeparator())),
+ origin: "paste"};
+ makeChange(cm.doc, change);
+ setSelectionReplaceHistory(cm.doc, simpleSelection(pos, changeEnd(change)));
+ }
+ });
+ reader.readAsText(file);
+ };
+ for (var i = 0; i < n; ++i) { loadFile(files[i], i); }
+ } else { // Normal drop
+ // Don't do a replace if the drop happened inside of the selected text.
+ if (cm.state.draggingText && cm.doc.sel.contains(pos) > -1) {
+ cm.state.draggingText(e);
+ // Ensure the editor is re-focused
+ setTimeout(function () { return cm.display.input.focus(); }, 20);
+ return
+ }
+ try {
+ var text$1 = e.dataTransfer.getData("Text");
+ if (text$1) {
+ var selected;
+ if (cm.state.draggingText && !cm.state.draggingText.copy)
+ { selected = cm.listSelections(); }
+ setSelectionNoUndo(cm.doc, simpleSelection(pos, pos));
+ if (selected) { for (var i$1 = 0; i$1 < selected.length; ++i$1)
+ { replaceRange(cm.doc, "", selected[i$1].anchor, selected[i$1].head, "drag"); } }
+ cm.replaceSelection(text$1, "around", "paste");
+ cm.display.input.focus();
+ }
+ }
+ catch(e){}
+ }
+}
+
+function onDragStart(cm, e) {
+ if (ie && (!cm.state.draggingText || +new Date - lastDrop < 100)) { e_stop(e); return }
+ if (signalDOMEvent(cm, e) || eventInWidget(cm.display, e)) { return }
+
+ e.dataTransfer.setData("Text", cm.getSelection());
+ e.dataTransfer.effectAllowed = "copyMove";
+
+ // Use dummy image instead of default browsers image.
+ // Recent Safari (~6.0.2) have a tendency to segfault when this happens, so we don't do it there.
+ if (e.dataTransfer.setDragImage && !safari) {
+ var img = elt("img", null, null, "position: fixed; left: 0; top: 0;");
+ img.src = "data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==";
+ if (presto) {
+ img.width = img.height = 1;
+ cm.display.wrapper.appendChild(img);
+ // Force a relayout, or Opera won't use our image for some obscure reason
+ img._top = img.offsetTop;
+ }
+ e.dataTransfer.setDragImage(img, 0, 0);
+ if (presto) { img.parentNode.removeChild(img); }
+ }
+}
+
+function onDragOver(cm, e) {
+ var pos = posFromMouse(cm, e);
+ if (!pos) { return }
+ var frag = document.createDocumentFragment();
+ drawSelectionCursor(cm, pos, frag);
+ if (!cm.display.dragCursor) {
+ cm.display.dragCursor = elt("div", null, "CodeMirror-cursors CodeMirror-dragcursors");
+ cm.display.lineSpace.insertBefore(cm.display.dragCursor, cm.display.cursorDiv);
+ }
+ removeChildrenAndAdd(cm.display.dragCursor, frag);
+}
+
+function clearDragCursor(cm) {
+ if (cm.display.dragCursor) {
+ cm.display.lineSpace.removeChild(cm.display.dragCursor);
+ cm.display.dragCursor = null;
+ }
+}
+
+// These must be handled carefully, because naively registering a
+// handler for each editor will cause the editors to never be
+// garbage collected.
+
+function forEachCodeMirror(f) {
+ if (!document.getElementsByClassName) { return }
+ var byClass = document.getElementsByClassName("CodeMirror");
+ for (var i = 0; i < byClass.length; i++) {
+ var cm = byClass[i].CodeMirror;
+ if (cm) { f(cm); }
+ }
+}
+
+var globalsRegistered = false;
+function ensureGlobalHandlers() {
+ if (globalsRegistered) { return }
+ registerGlobalHandlers();
+ globalsRegistered = true;
+}
+function registerGlobalHandlers() {
+ // When the window resizes, we need to refresh active editors.
+ var resizeTimer;
+ on(window, "resize", function () {
+ if (resizeTimer == null) { resizeTimer = setTimeout(function () {
+ resizeTimer = null;
+ forEachCodeMirror(onResize);
+ }, 100); }
+ });
+ // When the window loses focus, we want to show the editor as blurred
+ on(window, "blur", function () { return forEachCodeMirror(onBlur); });
+}
+// Called when the window resizes
+function onResize(cm) {
+ var d = cm.display;
+ if (d.lastWrapHeight == d.wrapper.clientHeight && d.lastWrapWidth == d.wrapper.clientWidth)
+ { return }
+ // Might be a text scaling operation, clear size caches.
+ d.cachedCharWidth = d.cachedTextHeight = d.cachedPaddingH = null;
+ d.scrollbarsClipped = false;
+ cm.setSize();
+}
+
+var keyNames = {
+ 3: "Enter", 8: "Backspace", 9: "Tab", 13: "Enter", 16: "Shift", 17: "Ctrl", 18: "Alt",
+ 19: "Pause", 20: "CapsLock", 27: "Esc", 32: "Space", 33: "PageUp", 34: "PageDown", 35: "End",
+ 36: "Home", 37: "Left", 38: "Up", 39: "Right", 40: "Down", 44: "PrintScrn", 45: "Insert",
+ 46: "Delete", 59: ";", 61: "=", 91: "Mod", 92: "Mod", 93: "Mod",
+ 106: "*", 107: "=", 109: "-", 110: ".", 111: "/", 127: "Delete",
+ 173: "-", 186: ";", 187: "=", 188: ",", 189: "-", 190: ".", 191: "/", 192: "`", 219: "[", 220: "\\",
+ 221: "]", 222: "'", 63232: "Up", 63233: "Down", 63234: "Left", 63235: "Right", 63272: "Delete",
+ 63273: "Home", 63275: "End", 63276: "PageUp", 63277: "PageDown", 63302: "Insert"
+};
+
+// Number keys
+for (var i = 0; i < 10; i++) { keyNames[i + 48] = keyNames[i + 96] = String(i); }
+// Alphabetic keys
+for (var i$1 = 65; i$1 <= 90; i$1++) { keyNames[i$1] = String.fromCharCode(i$1); }
+// Function keys
+for (var i$2 = 1; i$2 <= 12; i$2++) { keyNames[i$2 + 111] = keyNames[i$2 + 63235] = "F" + i$2; }
+
+var keyMap = {};
+
+keyMap.basic = {
+ "Left": "goCharLeft", "Right": "goCharRight", "Up": "goLineUp", "Down": "goLineDown",
+ "End": "goLineEnd", "Home": "goLineStartSmart", "PageUp": "goPageUp", "PageDown": "goPageDown",
+ "Delete": "delCharAfter", "Backspace": "delCharBefore", "Shift-Backspace": "delCharBefore",
+ "Tab": "defaultTab", "Shift-Tab": "indentAuto",
+ "Enter": "newlineAndIndent", "Insert": "toggleOverwrite",
+ "Esc": "singleSelection"
+};
+// Note that the save and find-related commands aren't defined by
+// default. User code or addons can define them. Unknown commands
+// are simply ignored.
+keyMap.pcDefault = {
+ "Ctrl-A": "selectAll", "Ctrl-D": "deleteLine", "Ctrl-Z": "undo", "Shift-Ctrl-Z": "redo", "Ctrl-Y": "redo",
+ "Ctrl-Home": "goDocStart", "Ctrl-End": "goDocEnd", "Ctrl-Up": "goLineUp", "Ctrl-Down": "goLineDown",
+ "Ctrl-Left": "goGroupLeft", "Ctrl-Right": "goGroupRight", "Alt-Left": "goLineStart", "Alt-Right": "goLineEnd",
+ "Ctrl-Backspace": "delGroupBefore", "Ctrl-Delete": "delGroupAfter", "Ctrl-S": "save", "Ctrl-F": "find",
+ "Ctrl-G": "findNext", "Shift-Ctrl-G": "findPrev", "Shift-Ctrl-F": "replace", "Shift-Ctrl-R": "replaceAll",
+ "Ctrl-[": "indentLess", "Ctrl-]": "indentMore",
+ "Ctrl-U": "undoSelection", "Shift-Ctrl-U": "redoSelection", "Alt-U": "redoSelection",
+ fallthrough: "basic"
+};
+// Very basic readline/emacs-style bindings, which are standard on Mac.
+keyMap.emacsy = {
+ "Ctrl-F": "goCharRight", "Ctrl-B": "goCharLeft", "Ctrl-P": "goLineUp", "Ctrl-N": "goLineDown",
+ "Alt-F": "goWordRight", "Alt-B": "goWordLeft", "Ctrl-A": "goLineStart", "Ctrl-E": "goLineEnd",
+ "Ctrl-V": "goPageDown", "Shift-Ctrl-V": "goPageUp", "Ctrl-D": "delCharAfter", "Ctrl-H": "delCharBefore",
+ "Alt-D": "delWordAfter", "Alt-Backspace": "delWordBefore", "Ctrl-K": "killLine", "Ctrl-T": "transposeChars",
+ "Ctrl-O": "openLine"
+};
+keyMap.macDefault = {
+ "Cmd-A": "selectAll", "Cmd-D": "deleteLine", "Cmd-Z": "undo", "Shift-Cmd-Z": "redo", "Cmd-Y": "redo",
+ "Cmd-Home": "goDocStart", "Cmd-Up": "goDocStart", "Cmd-End": "goDocEnd", "Cmd-Down": "goDocEnd", "Alt-Left": "goGroupLeft",
+ "Alt-Right": "goGroupRight", "Cmd-Left": "goLineLeft", "Cmd-Right": "goLineRight", "Alt-Backspace": "delGroupBefore",
+ "Ctrl-Alt-Backspace": "delGroupAfter", "Alt-Delete": "delGroupAfter", "Cmd-S": "save", "Cmd-F": "find",
+ "Cmd-G": "findNext", "Shift-Cmd-G": "findPrev", "Cmd-Alt-F": "replace", "Shift-Cmd-Alt-F": "replaceAll",
+ "Cmd-[": "indentLess", "Cmd-]": "indentMore", "Cmd-Backspace": "delWrappedLineLeft", "Cmd-Delete": "delWrappedLineRight",
+ "Cmd-U": "undoSelection", "Shift-Cmd-U": "redoSelection", "Ctrl-Up": "goDocStart", "Ctrl-Down": "goDocEnd",
+ fallthrough: ["basic", "emacsy"]
+};
+keyMap["default"] = mac ? keyMap.macDefault : keyMap.pcDefault;
+
+// KEYMAP DISPATCH
+
+function normalizeKeyName(name) {
+ var parts = name.split(/-(?!$)/);
+ name = parts[parts.length - 1];
+ var alt, ctrl, shift, cmd;
+ for (var i = 0; i < parts.length - 1; i++) {
+ var mod = parts[i];
+ if (/^(cmd|meta|m)$/i.test(mod)) { cmd = true; }
+ else if (/^a(lt)?$/i.test(mod)) { alt = true; }
+ else if (/^(c|ctrl|control)$/i.test(mod)) { ctrl = true; }
+ else if (/^s(hift)?$/i.test(mod)) { shift = true; }
+ else { throw new Error("Unrecognized modifier name: " + mod) }
+ }
+ if (alt) { name = "Alt-" + name; }
+ if (ctrl) { name = "Ctrl-" + name; }
+ if (cmd) { name = "Cmd-" + name; }
+ if (shift) { name = "Shift-" + name; }
+ return name
+}
+
+// This is a kludge to keep keymaps mostly working as raw objects
+// (backwards compatibility) while at the same time support features
+// like normalization and multi-stroke key bindings. It compiles a
+// new normalized keymap, and then updates the old object to reflect
+// this.
+function normalizeKeyMap(keymap) {
+ var copy = {};
+ for (var keyname in keymap) { if (keymap.hasOwnProperty(keyname)) {
+ var value = keymap[keyname];
+ if (/^(name|fallthrough|(de|at)tach)$/.test(keyname)) { continue }
+ if (value == "...") { delete keymap[keyname]; continue }
+
+ var keys = map(keyname.split(" "), normalizeKeyName);
+ for (var i = 0; i < keys.length; i++) {
+ var val = (void 0), name = (void 0);
+ if (i == keys.length - 1) {
+ name = keys.join(" ");
+ val = value;
+ } else {
+ name = keys.slice(0, i + 1).join(" ");
+ val = "...";
+ }
+ var prev = copy[name];
+ if (!prev) { copy[name] = val; }
+ else if (prev != val) { throw new Error("Inconsistent bindings for " + name) }
+ }
+ delete keymap[keyname];
+ } }
+ for (var prop in copy) { keymap[prop] = copy[prop]; }
+ return keymap
+}
+
+function lookupKey(key, map$$1, handle, context) {
+ map$$1 = getKeyMap(map$$1);
+ var found = map$$1.call ? map$$1.call(key, context) : map$$1[key];
+ if (found === false) { return "nothing" }
+ if (found === "...") { return "multi" }
+ if (found != null && handle(found)) { return "handled" }
+
+ if (map$$1.fallthrough) {
+ if (Object.prototype.toString.call(map$$1.fallthrough) != "[object Array]")
+ { return lookupKey(key, map$$1.fallthrough, handle, context) }
+ for (var i = 0; i < map$$1.fallthrough.length; i++) {
+ var result = lookupKey(key, map$$1.fallthrough[i], handle, context);
+ if (result) { return result }
+ }
+ }
+}
+
+// Modifier key presses don't count as 'real' key presses for the
+// purpose of keymap fallthrough.
+function isModifierKey(value) {
+ var name = typeof value == "string" ? value : keyNames[value.keyCode];
+ return name == "Ctrl" || name == "Alt" || name == "Shift" || name == "Mod"
+}
+
+function addModifierNames(name, event, noShift) {
+ var base = name;
+ if (event.altKey && base != "Alt") { name = "Alt-" + name; }
+ if ((flipCtrlCmd ? event.metaKey : event.ctrlKey) && base != "Ctrl") { name = "Ctrl-" + name; }
+ if ((flipCtrlCmd ? event.ctrlKey : event.metaKey) && base != "Cmd") { name = "Cmd-" + name; }
+ if (!noShift && event.shiftKey && base != "Shift") { name = "Shift-" + name; }
+ return name
+}
+
+// Look up the name of a key as indicated by an event object.
+function keyName(event, noShift) {
+ if (presto && event.keyCode == 34 && event["char"]) { return false }
+ var name = keyNames[event.keyCode];
+ if (name == null || event.altGraphKey) { return false }
+ return addModifierNames(name, event, noShift)
+}
+
+function getKeyMap(val) {
+ return typeof val == "string" ? keyMap[val] : val
+}
+
+// Helper for deleting text near the selection(s), used to implement
+// backspace, delete, and similar functionality.
+function deleteNearSelection(cm, compute) {
+ var ranges = cm.doc.sel.ranges, kill = [];
+ // Build up a set of ranges to kill first, merging overlapping
+ // ranges.
+ for (var i = 0; i < ranges.length; i++) {
+ var toKill = compute(ranges[i]);
+ while (kill.length && cmp(toKill.from, lst(kill).to) <= 0) {
+ var replaced = kill.pop();
+ if (cmp(replaced.from, toKill.from) < 0) {
+ toKill.from = replaced.from;
+ break
+ }
+ }
+ kill.push(toKill);
+ }
+ // Next, remove those actual ranges.
+ runInOp(cm, function () {
+ for (var i = kill.length - 1; i >= 0; i--)
+ { replaceRange(cm.doc, "", kill[i].from, kill[i].to, "+delete"); }
+ ensureCursorVisible(cm);
+ });
+}
+
+function moveCharLogically(line, ch, dir) {
+ var target = skipExtendingChars(line.text, ch + dir, dir);
+ return target < 0 || target > line.text.length ? null : target
+}
+
+function moveLogically(line, start, dir) {
+ var ch = moveCharLogically(line, start.ch, dir);
+ return ch == null ? null : new Pos(start.line, ch, dir < 0 ? "after" : "before")
+}
+
+function endOfLine(visually, cm, lineObj, lineNo, dir) {
+ if (visually) {
+ var order = getOrder(lineObj, cm.doc.direction);
+ if (order) {
+ var part = dir < 0 ? lst(order) : order[0];
+ var moveInStorageOrder = (dir < 0) == (part.level == 1);
+ var sticky = moveInStorageOrder ? "after" : "before";
+ var ch;
+ // With a wrapped rtl chunk (possibly spanning multiple bidi parts),
+ // it could be that the last bidi part is not on the last visual line,
+ // since visual lines contain content order-consecutive chunks.
+ // Thus, in rtl, we are looking for the first (content-order) character
+ // in the rtl chunk that is on the last line (that is, the same line
+ // as the last (content-order) character).
+ if (part.level > 0 || cm.doc.direction == "rtl") {
+ var prep = prepareMeasureForLine(cm, lineObj);
+ ch = dir < 0 ? lineObj.text.length - 1 : 0;
+ var targetTop = measureCharPrepared(cm, prep, ch).top;
+ ch = findFirst(function (ch) { return measureCharPrepared(cm, prep, ch).top == targetTop; }, (dir < 0) == (part.level == 1) ? part.from : part.to - 1, ch);
+ if (sticky == "before") { ch = moveCharLogically(lineObj, ch, 1); }
+ } else { ch = dir < 0 ? part.to : part.from; }
+ return new Pos(lineNo, ch, sticky)
+ }
+ }
+ return new Pos(lineNo, dir < 0 ? lineObj.text.length : 0, dir < 0 ? "before" : "after")
+}
+
+function moveVisually(cm, line, start, dir) {
+ var bidi = getOrder(line, cm.doc.direction);
+ if (!bidi) { return moveLogically(line, start, dir) }
+ if (start.ch >= line.text.length) {
+ start.ch = line.text.length;
+ start.sticky = "before";
+ } else if (start.ch <= 0) {
+ start.ch = 0;
+ start.sticky = "after";
+ }
+ var partPos = getBidiPartAt(bidi, start.ch, start.sticky), part = bidi[partPos];
+ if (cm.doc.direction == "ltr" && part.level % 2 == 0 && (dir > 0 ? part.to > start.ch : part.from < start.ch)) {
+ // Case 1: We move within an ltr part in an ltr editor. Even with wrapped lines,
+ // nothing interesting happens.
+ return moveLogically(line, start, dir)
+ }
+
+ var mv = function (pos, dir) { return moveCharLogically(line, pos instanceof Pos ? pos.ch : pos, dir); };
+ var prep;
+ var getWrappedLineExtent = function (ch) {
+ if (!cm.options.lineWrapping) { return {begin: 0, end: line.text.length} }
+ prep = prep || prepareMeasureForLine(cm, line);
+ return wrappedLineExtentChar(cm, line, prep, ch)
+ };
+ var wrappedLineExtent = getWrappedLineExtent(start.sticky == "before" ? mv(start, -1) : start.ch);
+
+ if (cm.doc.direction == "rtl" || part.level == 1) {
+ var moveInStorageOrder = (part.level == 1) == (dir < 0);
+ var ch = mv(start, moveInStorageOrder ? 1 : -1);
+ if (ch != null && (!moveInStorageOrder ? ch >= part.from && ch >= wrappedLineExtent.begin : ch <= part.to && ch <= wrappedLineExtent.end)) {
+ // Case 2: We move within an rtl part or in an rtl editor on the same visual line
+ var sticky = moveInStorageOrder ? "before" : "after";
+ return new Pos(start.line, ch, sticky)
+ }
+ }
+
+ // Case 3: Could not move within this bidi part in this visual line, so leave
+ // the current bidi part
+
+ var searchInVisualLine = function (partPos, dir, wrappedLineExtent) {
+ var getRes = function (ch, moveInStorageOrder) { return moveInStorageOrder
+ ? new Pos(start.line, mv(ch, 1), "before")
+ : new Pos(start.line, ch, "after"); };
+
+ for (; partPos >= 0 && partPos < bidi.length; partPos += dir) {
+ var part = bidi[partPos];
+ var moveInStorageOrder = (dir > 0) == (part.level != 1);
+ var ch = moveInStorageOrder ? wrappedLineExtent.begin : mv(wrappedLineExtent.end, -1);
+ if (part.from <= ch && ch < part.to) { return getRes(ch, moveInStorageOrder) }
+ ch = moveInStorageOrder ? part.from : mv(part.to, -1);
+ if (wrappedLineExtent.begin <= ch && ch < wrappedLineExtent.end) { return getRes(ch, moveInStorageOrder) }
+ }
+ };
+
+ // Case 3a: Look for other bidi parts on the same visual line
+ var res = searchInVisualLine(partPos + dir, dir, wrappedLineExtent);
+ if (res) { return res }
+
+ // Case 3b: Look for other bidi parts on the next visual line
+ var nextCh = dir > 0 ? wrappedLineExtent.end : mv(wrappedLineExtent.begin, -1);
+ if (nextCh != null && !(dir > 0 && nextCh == line.text.length)) {
+ res = searchInVisualLine(dir > 0 ? 0 : bidi.length - 1, dir, getWrappedLineExtent(nextCh));
+ if (res) { return res }
+ }
+
+ // Case 4: Nowhere to move
+ return null
+}
+
+// Commands are parameter-less actions that can be performed on an
+// editor, mostly used for keybindings.
+var commands = {
+ selectAll: selectAll,
+ singleSelection: function (cm) { return cm.setSelection(cm.getCursor("anchor"), cm.getCursor("head"), sel_dontScroll); },
+ killLine: function (cm) { return deleteNearSelection(cm, function (range) {
+ if (range.empty()) {
+ var len = getLine(cm.doc, range.head.line).text.length;
+ if (range.head.ch == len && range.head.line < cm.lastLine())
+ { return {from: range.head, to: Pos(range.head.line + 1, 0)} }
+ else
+ { return {from: range.head, to: Pos(range.head.line, len)} }
+ } else {
+ return {from: range.from(), to: range.to()}
+ }
+ }); },
+ deleteLine: function (cm) { return deleteNearSelection(cm, function (range) { return ({
+ from: Pos(range.from().line, 0),
+ to: clipPos(cm.doc, Pos(range.to().line + 1, 0))
+ }); }); },
+ delLineLeft: function (cm) { return deleteNearSelection(cm, function (range) { return ({
+ from: Pos(range.from().line, 0), to: range.from()
+ }); }); },
+ delWrappedLineLeft: function (cm) { return deleteNearSelection(cm, function (range) {
+ var top = cm.charCoords(range.head, "div").top + 5;
+ var leftPos = cm.coordsChar({left: 0, top: top}, "div");
+ return {from: leftPos, to: range.from()}
+ }); },
+ delWrappedLineRight: function (cm) { return deleteNearSelection(cm, function (range) {
+ var top = cm.charCoords(range.head, "div").top + 5;
+ var rightPos = cm.coordsChar({left: cm.display.lineDiv.offsetWidth + 100, top: top}, "div");
+ return {from: range.from(), to: rightPos }
+ }); },
+ undo: function (cm) { return cm.undo(); },
+ redo: function (cm) { return cm.redo(); },
+ undoSelection: function (cm) { return cm.undoSelection(); },
+ redoSelection: function (cm) { return cm.redoSelection(); },
+ goDocStart: function (cm) { return cm.extendSelection(Pos(cm.firstLine(), 0)); },
+ goDocEnd: function (cm) { return cm.extendSelection(Pos(cm.lastLine())); },
+ goLineStart: function (cm) { return cm.extendSelectionsBy(function (range) { return lineStart(cm, range.head.line); },
+ {origin: "+move", bias: 1}
+ ); },
+ goLineStartSmart: function (cm) { return cm.extendSelectionsBy(function (range) { return lineStartSmart(cm, range.head); },
+ {origin: "+move", bias: 1}
+ ); },
+ goLineEnd: function (cm) { return cm.extendSelectionsBy(function (range) { return lineEnd(cm, range.head.line); },
+ {origin: "+move", bias: -1}
+ ); },
+ goLineRight: function (cm) { return cm.extendSelectionsBy(function (range) {
+ var top = cm.cursorCoords(range.head, "div").top + 5;
+ return cm.coordsChar({left: cm.display.lineDiv.offsetWidth + 100, top: top}, "div")
+ }, sel_move); },
+ goLineLeft: function (cm) { return cm.extendSelectionsBy(function (range) {
+ var top = cm.cursorCoords(range.head, "div").top + 5;
+ return cm.coordsChar({left: 0, top: top}, "div")
+ }, sel_move); },
+ goLineLeftSmart: function (cm) { return cm.extendSelectionsBy(function (range) {
+ var top = cm.cursorCoords(range.head, "div").top + 5;
+ var pos = cm.coordsChar({left: 0, top: top}, "div");
+ if (pos.ch < cm.getLine(pos.line).search(/\S/)) { return lineStartSmart(cm, range.head) }
+ return pos
+ }, sel_move); },
+ goLineUp: function (cm) { return cm.moveV(-1, "line"); },
+ goLineDown: function (cm) { return cm.moveV(1, "line"); },
+ goPageUp: function (cm) { return cm.moveV(-1, "page"); },
+ goPageDown: function (cm) { return cm.moveV(1, "page"); },
+ goCharLeft: function (cm) { return cm.moveH(-1, "char"); },
+ goCharRight: function (cm) { return cm.moveH(1, "char"); },
+ goColumnLeft: function (cm) { return cm.moveH(-1, "column"); },
+ goColumnRight: function (cm) { return cm.moveH(1, "column"); },
+ goWordLeft: function (cm) { return cm.moveH(-1, "word"); },
+ goGroupRight: function (cm) { return cm.moveH(1, "group"); },
+ goGroupLeft: function (cm) { return cm.moveH(-1, "group"); },
+ goWordRight: function (cm) { return cm.moveH(1, "word"); },
+ delCharBefore: function (cm) { return cm.deleteH(-1, "char"); },
+ delCharAfter: function (cm) { return cm.deleteH(1, "char"); },
+ delWordBefore: function (cm) { return cm.deleteH(-1, "word"); },
+ delWordAfter: function (cm) { return cm.deleteH(1, "word"); },
+ delGroupBefore: function (cm) { return cm.deleteH(-1, "group"); },
+ delGroupAfter: function (cm) { return cm.deleteH(1, "group"); },
+ indentAuto: function (cm) { return cm.indentSelection("smart"); },
+ indentMore: function (cm) { return cm.indentSelection("add"); },
+ indentLess: function (cm) { return cm.indentSelection("subtract"); },
+ insertTab: function (cm) { return cm.replaceSelection("\t"); },
+ insertSoftTab: function (cm) {
+ var spaces = [], ranges = cm.listSelections(), tabSize = cm.options.tabSize;
+ for (var i = 0; i < ranges.length; i++) {
+ var pos = ranges[i].from();
+ var col = countColumn(cm.getLine(pos.line), pos.ch, tabSize);
+ spaces.push(spaceStr(tabSize - col % tabSize));
+ }
+ cm.replaceSelections(spaces);
+ },
+ defaultTab: function (cm) {
+ if (cm.somethingSelected()) { cm.indentSelection("add"); }
+ else { cm.execCommand("insertTab"); }
+ },
+ // Swap the two chars left and right of each selection's head.
+ // Move cursor behind the two swapped characters afterwards.
+ //
+ // Doesn't consider line feeds a character.
+ // Doesn't scan more than one line above to find a character.
+ // Doesn't do anything on an empty line.
+ // Doesn't do anything with non-empty selections.
+ transposeChars: function (cm) { return runInOp(cm, function () {
+ var ranges = cm.listSelections(), newSel = [];
+ for (var i = 0; i < ranges.length; i++) {
+ if (!ranges[i].empty()) { continue }
+ var cur = ranges[i].head, line = getLine(cm.doc, cur.line).text;
+ if (line) {
+ if (cur.ch == line.length) { cur = new Pos(cur.line, cur.ch - 1); }
+ if (cur.ch > 0) {
+ cur = new Pos(cur.line, cur.ch + 1);
+ cm.replaceRange(line.charAt(cur.ch - 1) + line.charAt(cur.ch - 2),
+ Pos(cur.line, cur.ch - 2), cur, "+transpose");
+ } else if (cur.line > cm.doc.first) {
+ var prev = getLine(cm.doc, cur.line - 1).text;
+ if (prev) {
+ cur = new Pos(cur.line, 1);
+ cm.replaceRange(line.charAt(0) + cm.doc.lineSeparator() +
+ prev.charAt(prev.length - 1),
+ Pos(cur.line - 1, prev.length - 1), cur, "+transpose");
+ }
+ }
+ }
+ newSel.push(new Range(cur, cur));
+ }
+ cm.setSelections(newSel);
+ }); },
+ newlineAndIndent: function (cm) { return runInOp(cm, function () {
+ var sels = cm.listSelections();
+ for (var i = sels.length - 1; i >= 0; i--)
+ { cm.replaceRange(cm.doc.lineSeparator(), sels[i].anchor, sels[i].head, "+input"); }
+ sels = cm.listSelections();
+ for (var i$1 = 0; i$1 < sels.length; i$1++)
+ { cm.indentLine(sels[i$1].from().line, null, true); }
+ ensureCursorVisible(cm);
+ }); },
+ openLine: function (cm) { return cm.replaceSelection("\n", "start"); },
+ toggleOverwrite: function (cm) { return cm.toggleOverwrite(); }
+};
+
+
+function lineStart(cm, lineN) {
+ var line = getLine(cm.doc, lineN);
+ var visual = visualLine(line);
+ if (visual != line) { lineN = lineNo(visual); }
+ return endOfLine(true, cm, visual, lineN, 1)
+}
+function lineEnd(cm, lineN) {
+ var line = getLine(cm.doc, lineN);
+ var visual = visualLineEnd(line);
+ if (visual != line) { lineN = lineNo(visual); }
+ return endOfLine(true, cm, line, lineN, -1)
+}
+function lineStartSmart(cm, pos) {
+ var start = lineStart(cm, pos.line);
+ var line = getLine(cm.doc, start.line);
+ var order = getOrder(line, cm.doc.direction);
+ if (!order || order[0].level == 0) {
+ var firstNonWS = Math.max(0, line.text.search(/\S/));
+ var inWS = pos.line == start.line && pos.ch <= firstNonWS && pos.ch;
+ return Pos(start.line, inWS ? 0 : firstNonWS, start.sticky)
+ }
+ return start
+}
+
+// Run a handler that was bound to a key.
+function doHandleBinding(cm, bound, dropShift) {
+ if (typeof bound == "string") {
+ bound = commands[bound];
+ if (!bound) { return false }
+ }
+ // Ensure previous input has been read, so that the handler sees a
+ // consistent view of the document
+ cm.display.input.ensurePolled();
+ var prevShift = cm.display.shift, done = false;
+ try {
+ if (cm.isReadOnly()) { cm.state.suppressEdits = true; }
+ if (dropShift) { cm.display.shift = false; }
+ done = bound(cm) != Pass;
+ } finally {
+ cm.display.shift = prevShift;
+ cm.state.suppressEdits = false;
+ }
+ return done
+}
+
+function lookupKeyForEditor(cm, name, handle) {
+ for (var i = 0; i < cm.state.keyMaps.length; i++) {
+ var result = lookupKey(name, cm.state.keyMaps[i], handle, cm);
+ if (result) { return result }
+ }
+ return (cm.options.extraKeys && lookupKey(name, cm.options.extraKeys, handle, cm))
+ || lookupKey(name, cm.options.keyMap, handle, cm)
+}
+
+// Note that, despite the name, this function is also used to check
+// for bound mouse clicks.
+
+var stopSeq = new Delayed;
+
+function dispatchKey(cm, name, e, handle) {
+ var seq = cm.state.keySeq;
+ if (seq) {
+ if (isModifierKey(name)) { return "handled" }
+ if (/\'$/.test(name))
+ { cm.state.keySeq = null; }
+ else
+ { stopSeq.set(50, function () {
+ if (cm.state.keySeq == seq) {
+ cm.state.keySeq = null;
+ cm.display.input.reset();
+ }
+ }); }
+ if (dispatchKeyInner(cm, seq + " " + name, e, handle)) { return true }
+ }
+ return dispatchKeyInner(cm, name, e, handle)
+}
+
+function dispatchKeyInner(cm, name, e, handle) {
+ var result = lookupKeyForEditor(cm, name, handle);
+
+ if (result == "multi")
+ { cm.state.keySeq = name; }
+ if (result == "handled")
+ { signalLater(cm, "keyHandled", cm, name, e); }
+
+ if (result == "handled" || result == "multi") {
+ e_preventDefault(e);
+ restartBlink(cm);
+ }
+
+ return !!result
+}
+
+// Handle a key from the keydown event.
+function handleKeyBinding(cm, e) {
+ var name = keyName(e, true);
+ if (!name) { return false }
+
+ if (e.shiftKey && !cm.state.keySeq) {
+ // First try to resolve full name (including 'Shift-'). Failing
+ // that, see if there is a cursor-motion command (starting with
+ // 'go') bound to the keyname without 'Shift-'.
+ return dispatchKey(cm, "Shift-" + name, e, function (b) { return doHandleBinding(cm, b, true); })
+ || dispatchKey(cm, name, e, function (b) {
+ if (typeof b == "string" ? /^go[A-Z]/.test(b) : b.motion)
+ { return doHandleBinding(cm, b) }
+ })
+ } else {
+ return dispatchKey(cm, name, e, function (b) { return doHandleBinding(cm, b); })
+ }
+}
+
+// Handle a key from the keypress event
+function handleCharBinding(cm, e, ch) {
+ return dispatchKey(cm, "'" + ch + "'", e, function (b) { return doHandleBinding(cm, b, true); })
+}
+
+var lastStoppedKey = null;
+function onKeyDown(e) {
+ var cm = this;
+ cm.curOp.focus = activeElt();
+ if (signalDOMEvent(cm, e)) { return }
+ // IE does strange things with escape.
+ if (ie && ie_version < 11 && e.keyCode == 27) { e.returnValue = false; }
+ var code = e.keyCode;
+ cm.display.shift = code == 16 || e.shiftKey;
+ var handled = handleKeyBinding(cm, e);
+ if (presto) {
+ lastStoppedKey = handled ? code : null;
+ // Opera has no cut event... we try to at least catch the key combo
+ if (!handled && code == 88 && !hasCopyEvent && (mac ? e.metaKey : e.ctrlKey))
+ { cm.replaceSelection("", null, "cut"); }
+ }
+
+ // Turn mouse into crosshair when Alt is held on Mac.
+ if (code == 18 && !/\bCodeMirror-crosshair\b/.test(cm.display.lineDiv.className))
+ { showCrossHair(cm); }
+}
+
+function showCrossHair(cm) {
+ var lineDiv = cm.display.lineDiv;
+ addClass(lineDiv, "CodeMirror-crosshair");
+
+ function up(e) {
+ if (e.keyCode == 18 || !e.altKey) {
+ rmClass(lineDiv, "CodeMirror-crosshair");
+ off(document, "keyup", up);
+ off(document, "mouseover", up);
+ }
+ }
+ on(document, "keyup", up);
+ on(document, "mouseover", up);
+}
+
+function onKeyUp(e) {
+ if (e.keyCode == 16) { this.doc.sel.shift = false; }
+ signalDOMEvent(this, e);
+}
+
+function onKeyPress(e) {
+ var cm = this;
+ if (eventInWidget(cm.display, e) || signalDOMEvent(cm, e) || e.ctrlKey && !e.altKey || mac && e.metaKey) { return }
+ var keyCode = e.keyCode, charCode = e.charCode;
+ if (presto && keyCode == lastStoppedKey) {lastStoppedKey = null; e_preventDefault(e); return}
+ if ((presto && (!e.which || e.which < 10)) && handleKeyBinding(cm, e)) { return }
+ var ch = String.fromCharCode(charCode == null ? keyCode : charCode);
+ // Some browsers fire keypress events for backspace
+ if (ch == "\x08") { return }
+ if (handleCharBinding(cm, e, ch)) { return }
+ cm.display.input.onKeyPress(e);
+}
+
+var DOUBLECLICK_DELAY = 400;
+
+var PastClick = function(time, pos, button) {
+ this.time = time;
+ this.pos = pos;
+ this.button = button;
+};
+
+PastClick.prototype.compare = function (time, pos, button) {
+ return this.time + DOUBLECLICK_DELAY > time &&
+ cmp(pos, this.pos) == 0 && button == this.button
+};
+
+var lastClick;
+var lastDoubleClick;
+function clickRepeat(pos, button) {
+ var now = +new Date;
+ if (lastDoubleClick && lastDoubleClick.compare(now, pos, button)) {
+ lastClick = lastDoubleClick = null;
+ return "triple"
+ } else if (lastClick && lastClick.compare(now, pos, button)) {
+ lastDoubleClick = new PastClick(now, pos, button);
+ lastClick = null;
+ return "double"
+ } else {
+ lastClick = new PastClick(now, pos, button);
+ lastDoubleClick = null;
+ return "single"
+ }
+}
+
+// A mouse down can be a single click, double click, triple click,
+// start of selection drag, start of text drag, new cursor
+// (ctrl-click), rectangle drag (alt-drag), or xwin
+// middle-click-paste. Or it might be a click on something we should
+// not interfere with, such as a scrollbar or widget.
+function onMouseDown(e) {
+ var cm = this, display = cm.display;
+ if (signalDOMEvent(cm, e) || display.activeTouch && display.input.supportsTouch()) { return }
+ display.input.ensurePolled();
+ display.shift = e.shiftKey;
+
+ if (eventInWidget(display, e)) {
+ if (!webkit) {
+ // Briefly turn off draggability, to allow widgets to do
+ // normal dragging things.
+ display.scroller.draggable = false;
+ setTimeout(function () { return display.scroller.draggable = true; }, 100);
+ }
+ return
+ }
+ if (clickInGutter(cm, e)) { return }
+ var pos = posFromMouse(cm, e), button = e_button(e), repeat = pos ? clickRepeat(pos, button) : "single";
+ window.focus();
+
+ // #3261: make sure, that we're not starting a second selection
+ if (button == 1 && cm.state.selectingText)
+ { cm.state.selectingText(e); }
+
+ if (pos && handleMappedButton(cm, button, pos, repeat, e)) { return }
+
+ if (button == 1) {
+ if (pos) { leftButtonDown(cm, pos, repeat, e); }
+ else if (e_target(e) == display.scroller) { e_preventDefault(e); }
+ } else if (button == 2) {
+ if (pos) { extendSelection(cm.doc, pos); }
+ setTimeout(function () { return display.input.focus(); }, 20);
+ } else if (button == 3) {
+ if (captureRightClick) { onContextMenu(cm, e); }
+ else { delayBlurEvent(cm); }
+ }
+}
+
+function handleMappedButton(cm, button, pos, repeat, event) {
+ var name = "Click";
+ if (repeat == "double") { name = "Double" + name; }
+ else if (repeat == "triple") { name = "Triple" + name; }
+ name = (button == 1 ? "Left" : button == 2 ? "Middle" : "Right") + name;
+
+ return dispatchKey(cm, addModifierNames(name, event), event, function (bound) {
+ if (typeof bound == "string") { bound = commands[bound]; }
+ if (!bound) { return false }
+ var done = false;
+ try {
+ if (cm.isReadOnly()) { cm.state.suppressEdits = true; }
+ done = bound(cm, pos) != Pass;
+ } finally {
+ cm.state.suppressEdits = false;
+ }
+ return done
+ })
+}
+
+function configureMouse(cm, repeat, event) {
+ var option = cm.getOption("configureMouse");
+ var value = option ? option(cm, repeat, event) : {};
+ if (value.unit == null) {
+ var rect = chromeOS ? event.shiftKey && event.metaKey : event.altKey;
+ value.unit = rect ? "rectangle" : repeat == "single" ? "char" : repeat == "double" ? "word" : "line";
+ }
+ if (value.extend == null || cm.doc.extend) { value.extend = cm.doc.extend || event.shiftKey; }
+ if (value.addNew == null) { value.addNew = mac ? event.metaKey : event.ctrlKey; }
+ if (value.moveOnDrag == null) { value.moveOnDrag = !(mac ? event.altKey : event.ctrlKey); }
+ return value
+}
+
+function leftButtonDown(cm, pos, repeat, event) {
+ if (ie) { setTimeout(bind(ensureFocus, cm), 0); }
+ else { cm.curOp.focus = activeElt(); }
+
+ var behavior = configureMouse(cm, repeat, event);
+
+ var sel = cm.doc.sel, contained;
+ if (cm.options.dragDrop && dragAndDrop && !cm.isReadOnly() &&
+ repeat == "single" && (contained = sel.contains(pos)) > -1 &&
+ (cmp((contained = sel.ranges[contained]).from(), pos) < 0 || pos.xRel > 0) &&
+ (cmp(contained.to(), pos) > 0 || pos.xRel < 0))
+ { leftButtonStartDrag(cm, event, pos, behavior); }
+ else
+ { leftButtonSelect(cm, event, pos, behavior); }
+}
+
+// Start a text drag. When it ends, see if any dragging actually
+// happen, and treat as a click if it didn't.
+function leftButtonStartDrag(cm, event, pos, behavior) {
+ var display = cm.display, moved = false;
+ var dragEnd = operation(cm, function (e) {
+ if (webkit) { display.scroller.draggable = false; }
+ cm.state.draggingText = false;
+ off(document, "mouseup", dragEnd);
+ off(document, "mousemove", mouseMove);
+ off(display.scroller, "dragstart", dragStart);
+ off(display.scroller, "drop", dragEnd);
+ if (!moved) {
+ e_preventDefault(e);
+ if (!behavior.addNew)
+ { extendSelection(cm.doc, pos, null, null, behavior.extend); }
+ // Work around unexplainable focus problem in IE9 (#2127) and Chrome (#3081)
+ if (webkit || ie && ie_version == 9)
+ { setTimeout(function () {document.body.focus(); display.input.focus();}, 20); }
+ else
+ { display.input.focus(); }
+ }
+ });
+ var mouseMove = function(e2) {
+ moved = moved || Math.abs(event.clientX - e2.clientX) + Math.abs(event.clientY - e2.clientY) >= 10;
+ };
+ var dragStart = function () { return moved = true; };
+ // Let the drag handler handle this.
+ if (webkit) { display.scroller.draggable = true; }
+ cm.state.draggingText = dragEnd;
+ dragEnd.copy = !behavior.moveOnDrag;
+ // IE's approach to draggable
+ if (display.scroller.dragDrop) { display.scroller.dragDrop(); }
+ on(document, "mouseup", dragEnd);
+ on(document, "mousemove", mouseMove);
+ on(display.scroller, "dragstart", dragStart);
+ on(display.scroller, "drop", dragEnd);
+
+ delayBlurEvent(cm);
+ setTimeout(function () { return display.input.focus(); }, 20);
+}
+
+function rangeForUnit(cm, pos, unit) {
+ if (unit == "char") { return new Range(pos, pos) }
+ if (unit == "word") { return cm.findWordAt(pos) }
+ if (unit == "line") { return new Range(Pos(pos.line, 0), clipPos(cm.doc, Pos(pos.line + 1, 0))) }
+ var result = unit(cm, pos);
+ return new Range(result.from, result.to)
+}
+
+// Normal selection, as opposed to text dragging.
+function leftButtonSelect(cm, event, start, behavior) {
+ var display = cm.display, doc = cm.doc;
+ e_preventDefault(event);
+
+ var ourRange, ourIndex, startSel = doc.sel, ranges = startSel.ranges;
+ if (behavior.addNew && !behavior.extend) {
+ ourIndex = doc.sel.contains(start);
+ if (ourIndex > -1)
+ { ourRange = ranges[ourIndex]; }
+ else
+ { ourRange = new Range(start, start); }
+ } else {
+ ourRange = doc.sel.primary();
+ ourIndex = doc.sel.primIndex;
+ }
+
+ if (behavior.unit == "rectangle") {
+ if (!behavior.addNew) { ourRange = new Range(start, start); }
+ start = posFromMouse(cm, event, true, true);
+ ourIndex = -1;
+ } else {
+ var range$$1 = rangeForUnit(cm, start, behavior.unit);
+ if (behavior.extend)
+ { ourRange = extendRange(ourRange, range$$1.anchor, range$$1.head, behavior.extend); }
+ else
+ { ourRange = range$$1; }
+ }
+
+ if (!behavior.addNew) {
+ ourIndex = 0;
+ setSelection(doc, new Selection([ourRange], 0), sel_mouse);
+ startSel = doc.sel;
+ } else if (ourIndex == -1) {
+ ourIndex = ranges.length;
+ setSelection(doc, normalizeSelection(ranges.concat([ourRange]), ourIndex),
+ {scroll: false, origin: "*mouse"});
+ } else if (ranges.length > 1 && ranges[ourIndex].empty() && behavior.unit == "char" && !behavior.extend) {
+ setSelection(doc, normalizeSelection(ranges.slice(0, ourIndex).concat(ranges.slice(ourIndex + 1)), 0),
+ {scroll: false, origin: "*mouse"});
+ startSel = doc.sel;
+ } else {
+ replaceOneSelection(doc, ourIndex, ourRange, sel_mouse);
+ }
+
+ var lastPos = start;
+ function extendTo(pos) {
+ if (cmp(lastPos, pos) == 0) { return }
+ lastPos = pos;
+
+ if (behavior.unit == "rectangle") {
+ var ranges = [], tabSize = cm.options.tabSize;
+ var startCol = countColumn(getLine(doc, start.line).text, start.ch, tabSize);
+ var posCol = countColumn(getLine(doc, pos.line).text, pos.ch, tabSize);
+ var left = Math.min(startCol, posCol), right = Math.max(startCol, posCol);
+ for (var line = Math.min(start.line, pos.line), end = Math.min(cm.lastLine(), Math.max(start.line, pos.line));
+ line <= end; line++) {
+ var text = getLine(doc, line).text, leftPos = findColumn(text, left, tabSize);
+ if (left == right)
+ { ranges.push(new Range(Pos(line, leftPos), Pos(line, leftPos))); }
+ else if (text.length > leftPos)
+ { ranges.push(new Range(Pos(line, leftPos), Pos(line, findColumn(text, right, tabSize)))); }
+ }
+ if (!ranges.length) { ranges.push(new Range(start, start)); }
+ setSelection(doc, normalizeSelection(startSel.ranges.slice(0, ourIndex).concat(ranges), ourIndex),
+ {origin: "*mouse", scroll: false});
+ cm.scrollIntoView(pos);
+ } else {
+ var oldRange = ourRange;
+ var range$$1 = rangeForUnit(cm, pos, behavior.unit);
+ var anchor = oldRange.anchor, head;
+ if (cmp(range$$1.anchor, anchor) > 0) {
+ head = range$$1.head;
+ anchor = minPos(oldRange.from(), range$$1.anchor);
+ } else {
+ head = range$$1.anchor;
+ anchor = maxPos(oldRange.to(), range$$1.head);
+ }
+ var ranges$1 = startSel.ranges.slice(0);
+ ranges$1[ourIndex] = bidiSimplify(cm, new Range(clipPos(doc, anchor), head));
+ setSelection(doc, normalizeSelection(ranges$1, ourIndex), sel_mouse);
+ }
+ }
+
+ var editorSize = display.wrapper.getBoundingClientRect();
+ // Used to ensure timeout re-tries don't fire when another extend
+ // happened in the meantime (clearTimeout isn't reliable -- at
+ // least on Chrome, the timeouts still happen even when cleared,
+ // if the clear happens after their scheduled firing time).
+ var counter = 0;
+
+ function extend(e) {
+ var curCount = ++counter;
+ var cur = posFromMouse(cm, e, true, behavior.unit == "rectangle");
+ if (!cur) { return }
+ if (cmp(cur, lastPos) != 0) {
+ cm.curOp.focus = activeElt();
+ extendTo(cur);
+ var visible = visibleLines(display, doc);
+ if (cur.line >= visible.to || cur.line < visible.from)
+ { setTimeout(operation(cm, function () {if (counter == curCount) { extend(e); }}), 150); }
+ } else {
+ var outside = e.clientY < editorSize.top ? -20 : e.clientY > editorSize.bottom ? 20 : 0;
+ if (outside) { setTimeout(operation(cm, function () {
+ if (counter != curCount) { return }
+ display.scroller.scrollTop += outside;
+ extend(e);
+ }), 50); }
+ }
+ }
+
+ function done(e) {
+ cm.state.selectingText = false;
+ counter = Infinity;
+ e_preventDefault(e);
+ display.input.focus();
+ off(document, "mousemove", move);
+ off(document, "mouseup", up);
+ doc.history.lastSelOrigin = null;
+ }
+
+ var move = operation(cm, function (e) {
+ if (!e_button(e)) { done(e); }
+ else { extend(e); }
+ });
+ var up = operation(cm, done);
+ cm.state.selectingText = up;
+ on(document, "mousemove", move);
+ on(document, "mouseup", up);
+}
+
+// Used when mouse-selecting to adjust the anchor to the proper side
+// of a bidi jump depending on the visual position of the head.
+function bidiSimplify(cm, range$$1) {
+ var anchor = range$$1.anchor;
+ var head = range$$1.head;
+ var anchorLine = getLine(cm.doc, anchor.line);
+ if (cmp(anchor, head) == 0 && anchor.sticky == head.sticky) { return range$$1 }
+ var order = getOrder(anchorLine);
+ if (!order) { return range$$1 }
+ var index = getBidiPartAt(order, anchor.ch, anchor.sticky), part = order[index];
+ if (part.from != anchor.ch && part.to != anchor.ch) { return range$$1 }
+ var boundary = index + ((part.from == anchor.ch) == (part.level != 1) ? 0 : 1);
+ if (boundary == 0 || boundary == order.length) { return range$$1 }
+
+ // Compute the relative visual position of the head compared to the
+ // anchor (<0 is to the left, >0 to the right)
+ var leftSide;
+ if (head.line != anchor.line) {
+ leftSide = (head.line - anchor.line) * (cm.doc.direction == "ltr" ? 1 : -1) > 0;
+ } else {
+ var headIndex = getBidiPartAt(order, head.ch, head.sticky);
+ var dir = headIndex - index || (head.ch - anchor.ch) * (part.level == 1 ? -1 : 1);
+ if (headIndex == boundary - 1 || headIndex == boundary)
+ { leftSide = dir < 0; }
+ else
+ { leftSide = dir > 0; }
+ }
+
+ var usePart = order[boundary + (leftSide ? -1 : 0)];
+ var from = leftSide == (usePart.level == 1);
+ var ch = from ? usePart.from : usePart.to, sticky = from ? "after" : "before";
+ return anchor.ch == ch && anchor.sticky == sticky ? range$$1 : new Range(new Pos(anchor.line, ch, sticky), head)
+}
+
+
+// Determines whether an event happened in the gutter, and fires the
+// handlers for the corresponding event.
+function gutterEvent(cm, e, type, prevent) {
+ var mX, mY;
+ if (e.touches) {
+ mX = e.touches[0].clientX;
+ mY = e.touches[0].clientY;
+ } else {
+ try { mX = e.clientX; mY = e.clientY; }
+ catch(e) { return false }
+ }
+ if (mX >= Math.floor(cm.display.gutters.getBoundingClientRect().right)) { return false }
+ if (prevent) { e_preventDefault(e); }
+
+ var display = cm.display;
+ var lineBox = display.lineDiv.getBoundingClientRect();
+
+ if (mY > lineBox.bottom || !hasHandler(cm, type)) { return e_defaultPrevented(e) }
+ mY -= lineBox.top - display.viewOffset;
+
+ for (var i = 0; i < cm.options.gutters.length; ++i) {
+ var g = display.gutters.childNodes[i];
+ if (g && g.getBoundingClientRect().right >= mX) {
+ var line = lineAtHeight(cm.doc, mY);
+ var gutter = cm.options.gutters[i];
+ signal(cm, type, cm, line, gutter, e);
+ return e_defaultPrevented(e)
+ }
+ }
+}
+
+function clickInGutter(cm, e) {
+ return gutterEvent(cm, e, "gutterClick", true)
+}
+
+// CONTEXT MENU HANDLING
+
+// To make the context menu work, we need to briefly unhide the
+// textarea (making it as unobtrusive as possible) to let the
+// right-click take effect on it.
+function onContextMenu(cm, e) {
+ if (eventInWidget(cm.display, e) || contextMenuInGutter(cm, e)) { return }
+ if (signalDOMEvent(cm, e, "contextmenu")) { return }
+ cm.display.input.onContextMenu(e);
+}
+
+function contextMenuInGutter(cm, e) {
+ if (!hasHandler(cm, "gutterContextMenu")) { return false }
+ return gutterEvent(cm, e, "gutterContextMenu", false)
+}
+
+function themeChanged(cm) {
+ cm.display.wrapper.className = cm.display.wrapper.className.replace(/\s*cm-s-\S+/g, "") +
+ cm.options.theme.replace(/(^|\s)\s*/g, " cm-s-");
+ clearCaches(cm);
+}
+
+var Init = {toString: function(){return "CodeMirror.Init"}};
+
+var defaults = {};
+var optionHandlers = {};
+
+function defineOptions(CodeMirror) {
+ var optionHandlers = CodeMirror.optionHandlers;
+
+ function option(name, deflt, handle, notOnInit) {
+ CodeMirror.defaults[name] = deflt;
+ if (handle) { optionHandlers[name] =
+ notOnInit ? function (cm, val, old) {if (old != Init) { handle(cm, val, old); }} : handle; }
+ }
+
+ CodeMirror.defineOption = option;
+
+ // Passed to option handlers when there is no old value.
+ CodeMirror.Init = Init;
+
+ // These two are, on init, called from the constructor because they
+ // have to be initialized before the editor can start at all.
+ option("value", "", function (cm, val) { return cm.setValue(val); }, true);
+ option("mode", null, function (cm, val) {
+ cm.doc.modeOption = val;
+ loadMode(cm);
+ }, true);
+
+ option("indentUnit", 2, loadMode, true);
+ option("indentWithTabs", false);
+ option("smartIndent", true);
+ option("tabSize", 4, function (cm) {
+ resetModeState(cm);
+ clearCaches(cm);
+ regChange(cm);
+ }, true);
+ option("lineSeparator", null, function (cm, val) {
+ cm.doc.lineSep = val;
+ if (!val) { return }
+ var newBreaks = [], lineNo = cm.doc.first;
+ cm.doc.iter(function (line) {
+ for (var pos = 0;;) {
+ var found = line.text.indexOf(val, pos);
+ if (found == -1) { break }
+ pos = found + val.length;
+ newBreaks.push(Pos(lineNo, found));
+ }
+ lineNo++;
+ });
+ for (var i = newBreaks.length - 1; i >= 0; i--)
+ { replaceRange(cm.doc, val, newBreaks[i], Pos(newBreaks[i].line, newBreaks[i].ch + val.length)); }
+ });
+ option("specialChars", /[\u0000-\u001f\u007f-\u009f\u00ad\u061c\u200b-\u200f\u2028\u2029\ufeff]/g, function (cm, val, old) {
+ cm.state.specialChars = new RegExp(val.source + (val.test("\t") ? "" : "|\t"), "g");
+ if (old != Init) { cm.refresh(); }
+ });
+ option("specialCharPlaceholder", defaultSpecialCharPlaceholder, function (cm) { return cm.refresh(); }, true);
+ option("electricChars", true);
+ option("inputStyle", mobile ? "contenteditable" : "textarea", function () {
+ throw new Error("inputStyle can not (yet) be changed in a running editor") // FIXME
+ }, true);
+ option("spellcheck", false, function (cm, val) { return cm.getInputField().spellcheck = val; }, true);
+ option("rtlMoveVisually", !windows);
+ option("wholeLineUpdateBefore", true);
+
+ option("theme", "default", function (cm) {
+ themeChanged(cm);
+ guttersChanged(cm);
+ }, true);
+ option("keyMap", "default", function (cm, val, old) {
+ var next = getKeyMap(val);
+ var prev = old != Init && getKeyMap(old);
+ if (prev && prev.detach) { prev.detach(cm, next); }
+ if (next.attach) { next.attach(cm, prev || null); }
+ });
+ option("extraKeys", null);
+ option("configureMouse", null);
+
+ option("lineWrapping", false, wrappingChanged, true);
+ option("gutters", [], function (cm) {
+ setGuttersForLineNumbers(cm.options);
+ guttersChanged(cm);
+ }, true);
+ option("fixedGutter", true, function (cm, val) {
+ cm.display.gutters.style.left = val ? compensateForHScroll(cm.display) + "px" : "0";
+ cm.refresh();
+ }, true);
+ option("coverGutterNextToScrollbar", false, function (cm) { return updateScrollbars(cm); }, true);
+ option("scrollbarStyle", "native", function (cm) {
+ initScrollbars(cm);
+ updateScrollbars(cm);
+ cm.display.scrollbars.setScrollTop(cm.doc.scrollTop);
+ cm.display.scrollbars.setScrollLeft(cm.doc.scrollLeft);
+ }, true);
+ option("lineNumbers", false, function (cm) {
+ setGuttersForLineNumbers(cm.options);
+ guttersChanged(cm);
+ }, true);
+ option("firstLineNumber", 1, guttersChanged, true);
+ option("lineNumberFormatter", function (integer) { return integer; }, guttersChanged, true);
+ option("showCursorWhenSelecting", false, updateSelection, true);
+
+ option("resetSelectionOnContextMenu", true);
+ option("lineWiseCopyCut", true);
+ option("pasteLinesPerSelection", true);
+
+ option("readOnly", false, function (cm, val) {
+ if (val == "nocursor") {
+ onBlur(cm);
+ cm.display.input.blur();
+ }
+ cm.display.input.readOnlyChanged(val);
+ });
+ option("disableInput", false, function (cm, val) {if (!val) { cm.display.input.reset(); }}, true);
+ option("dragDrop", true, dragDropChanged);
+ option("allowDropFileTypes", null);
+
+ option("cursorBlinkRate", 530);
+ option("cursorScrollMargin", 0);
+ option("cursorHeight", 1, updateSelection, true);
+ option("singleCursorHeightPerLine", true, updateSelection, true);
+ option("workTime", 100);
+ option("workDelay", 100);
+ option("flattenSpans", true, resetModeState, true);
+ option("addModeClass", false, resetModeState, true);
+ option("pollInterval", 100);
+ option("undoDepth", 200, function (cm, val) { return cm.doc.history.undoDepth = val; });
+ option("historyEventDelay", 1250);
+ option("viewportMargin", 10, function (cm) { return cm.refresh(); }, true);
+ option("maxHighlightLength", 10000, resetModeState, true);
+ option("moveInputWithCursor", true, function (cm, val) {
+ if (!val) { cm.display.input.resetPosition(); }
+ });
+
+ option("tabindex", null, function (cm, val) { return cm.display.input.getField().tabIndex = val || ""; });
+ option("autofocus", null);
+ option("direction", "ltr", function (cm, val) { return cm.doc.setDirection(val); }, true);
+}
+
+function guttersChanged(cm) {
+ updateGutters(cm);
+ regChange(cm);
+ alignHorizontally(cm);
+}
+
+function dragDropChanged(cm, value, old) {
+ var wasOn = old && old != Init;
+ if (!value != !wasOn) {
+ var funcs = cm.display.dragFunctions;
+ var toggle = value ? on : off;
+ toggle(cm.display.scroller, "dragstart", funcs.start);
+ toggle(cm.display.scroller, "dragenter", funcs.enter);
+ toggle(cm.display.scroller, "dragover", funcs.over);
+ toggle(cm.display.scroller, "dragleave", funcs.leave);
+ toggle(cm.display.scroller, "drop", funcs.drop);
+ }
+}
+
+function wrappingChanged(cm) {
+ if (cm.options.lineWrapping) {
+ addClass(cm.display.wrapper, "CodeMirror-wrap");
+ cm.display.sizer.style.minWidth = "";
+ cm.display.sizerWidth = null;
+ } else {
+ rmClass(cm.display.wrapper, "CodeMirror-wrap");
+ findMaxLine(cm);
+ }
+ estimateLineHeights(cm);
+ regChange(cm);
+ clearCaches(cm);
+ setTimeout(function () { return updateScrollbars(cm); }, 100);
+}
+
+// A CodeMirror instance represents an editor. This is the object
+// that user code is usually dealing with.
+
+function CodeMirror$1(place, options) {
+ var this$1 = this;
+
+ if (!(this instanceof CodeMirror$1)) { return new CodeMirror$1(place, options) }
+
+ this.options = options = options ? copyObj(options) : {};
+ // Determine effective options based on given values and defaults.
+ copyObj(defaults, options, false);
+ setGuttersForLineNumbers(options);
+
+ var doc = options.value;
+ if (typeof doc == "string") { doc = new Doc(doc, options.mode, null, options.lineSeparator, options.direction); }
+ this.doc = doc;
+
+ var input = new CodeMirror$1.inputStyles[options.inputStyle](this);
+ var display = this.display = new Display(place, doc, input);
+ display.wrapper.CodeMirror = this;
+ updateGutters(this);
+ themeChanged(this);
+ if (options.lineWrapping)
+ { this.display.wrapper.className += " CodeMirror-wrap"; }
+ initScrollbars(this);
+
+ this.state = {
+ keyMaps: [], // stores maps added by addKeyMap
+ overlays: [], // highlighting overlays, as added by addOverlay
+ modeGen: 0, // bumped when mode/overlay changes, used to invalidate highlighting info
+ overwrite: false,
+ delayingBlurEvent: false,
+ focused: false,
+ suppressEdits: false, // used to disable editing during key handlers when in readOnly mode
+ pasteIncoming: false, cutIncoming: false, // help recognize paste/cut edits in input.poll
+ selectingText: false,
+ draggingText: false,
+ highlight: new Delayed(), // stores highlight worker timeout
+ keySeq: null, // Unfinished key sequence
+ specialChars: null
+ };
+
+ if (options.autofocus && !mobile) { display.input.focus(); }
+
+ // Override magic textarea content restore that IE sometimes does
+ // on our hidden textarea on reload
+ if (ie && ie_version < 11) { setTimeout(function () { return this$1.display.input.reset(true); }, 20); }
+
+ registerEventHandlers(this);
+ ensureGlobalHandlers();
+
+ startOperation(this);
+ this.curOp.forceUpdate = true;
+ attachDoc(this, doc);
+
+ if ((options.autofocus && !mobile) || this.hasFocus())
+ { setTimeout(bind(onFocus, this), 20); }
+ else
+ { onBlur(this); }
+
+ for (var opt in optionHandlers) { if (optionHandlers.hasOwnProperty(opt))
+ { optionHandlers[opt](this$1, options[opt], Init); } }
+ maybeUpdateLineNumberWidth(this);
+ if (options.finishInit) { options.finishInit(this); }
+ for (var i = 0; i < initHooks.length; ++i) { initHooks[i](this$1); }
+ endOperation(this);
+ // Suppress optimizelegibility in Webkit, since it breaks text
+ // measuring on line wrapping boundaries.
+ if (webkit && options.lineWrapping &&
+ getComputedStyle(display.lineDiv).textRendering == "optimizelegibility")
+ { display.lineDiv.style.textRendering = "auto"; }
+}
+
+// The default configuration options.
+CodeMirror$1.defaults = defaults;
+// Functions to run when options are changed.
+CodeMirror$1.optionHandlers = optionHandlers;
+
+// Attach the necessary event handlers when initializing the editor
+function registerEventHandlers(cm) {
+ var d = cm.display;
+ on(d.scroller, "mousedown", operation(cm, onMouseDown));
+ // Older IE's will not fire a second mousedown for a double click
+ if (ie && ie_version < 11)
+ { on(d.scroller, "dblclick", operation(cm, function (e) {
+ if (signalDOMEvent(cm, e)) { return }
+ var pos = posFromMouse(cm, e);
+ if (!pos || clickInGutter(cm, e) || eventInWidget(cm.display, e)) { return }
+ e_preventDefault(e);
+ var word = cm.findWordAt(pos);
+ extendSelection(cm.doc, word.anchor, word.head);
+ })); }
+ else
+ { on(d.scroller, "dblclick", function (e) { return signalDOMEvent(cm, e) || e_preventDefault(e); }); }
+ // Some browsers fire contextmenu *after* opening the menu, at
+ // which point we can't mess with it anymore. Context menu is
+ // handled in onMouseDown for these browsers.
+ if (!captureRightClick) { on(d.scroller, "contextmenu", function (e) { return onContextMenu(cm, e); }); }
+
+ // Used to suppress mouse event handling when a touch happens
+ var touchFinished, prevTouch = {end: 0};
+ function finishTouch() {
+ if (d.activeTouch) {
+ touchFinished = setTimeout(function () { return d.activeTouch = null; }, 1000);
+ prevTouch = d.activeTouch;
+ prevTouch.end = +new Date;
+ }
+ }
+ function isMouseLikeTouchEvent(e) {
+ if (e.touches.length != 1) { return false }
+ var touch = e.touches[0];
+ return touch.radiusX <= 1 && touch.radiusY <= 1
+ }
+ function farAway(touch, other) {
+ if (other.left == null) { return true }
+ var dx = other.left - touch.left, dy = other.top - touch.top;
+ return dx * dx + dy * dy > 20 * 20
+ }
+ on(d.scroller, "touchstart", function (e) {
+ if (!signalDOMEvent(cm, e) && !isMouseLikeTouchEvent(e) && !clickInGutter(cm, e)) {
+ d.input.ensurePolled();
+ clearTimeout(touchFinished);
+ var now = +new Date;
+ d.activeTouch = {start: now, moved: false,
+ prev: now - prevTouch.end <= 300 ? prevTouch : null};
+ if (e.touches.length == 1) {
+ d.activeTouch.left = e.touches[0].pageX;
+ d.activeTouch.top = e.touches[0].pageY;
+ }
+ }
+ });
+ on(d.scroller, "touchmove", function () {
+ if (d.activeTouch) { d.activeTouch.moved = true; }
+ });
+ on(d.scroller, "touchend", function (e) {
+ var touch = d.activeTouch;
+ if (touch && !eventInWidget(d, e) && touch.left != null &&
+ !touch.moved && new Date - touch.start < 300) {
+ var pos = cm.coordsChar(d.activeTouch, "page"), range;
+ if (!touch.prev || farAway(touch, touch.prev)) // Single tap
+ { range = new Range(pos, pos); }
+ else if (!touch.prev.prev || farAway(touch, touch.prev.prev)) // Double tap
+ { range = cm.findWordAt(pos); }
+ else // Triple tap
+ { range = new Range(Pos(pos.line, 0), clipPos(cm.doc, Pos(pos.line + 1, 0))); }
+ cm.setSelection(range.anchor, range.head);
+ cm.focus();
+ e_preventDefault(e);
+ }
+ finishTouch();
+ });
+ on(d.scroller, "touchcancel", finishTouch);
+
+ // Sync scrolling between fake scrollbars and real scrollable
+ // area, ensure viewport is updated when scrolling.
+ on(d.scroller, "scroll", function () {
+ if (d.scroller.clientHeight) {
+ updateScrollTop(cm, d.scroller.scrollTop);
+ setScrollLeft(cm, d.scroller.scrollLeft, true);
+ signal(cm, "scroll", cm);
+ }
+ });
+
+ // Listen to wheel events in order to try and update the viewport on time.
+ on(d.scroller, "mousewheel", function (e) { return onScrollWheel(cm, e); });
+ on(d.scroller, "DOMMouseScroll", function (e) { return onScrollWheel(cm, e); });
+
+ // Prevent wrapper from ever scrolling
+ on(d.wrapper, "scroll", function () { return d.wrapper.scrollTop = d.wrapper.scrollLeft = 0; });
+
+ d.dragFunctions = {
+ enter: function (e) {if (!signalDOMEvent(cm, e)) { e_stop(e); }},
+ over: function (e) {if (!signalDOMEvent(cm, e)) { onDragOver(cm, e); e_stop(e); }},
+ start: function (e) { return onDragStart(cm, e); },
+ drop: operation(cm, onDrop),
+ leave: function (e) {if (!signalDOMEvent(cm, e)) { clearDragCursor(cm); }}
+ };
+
+ var inp = d.input.getField();
+ on(inp, "keyup", function (e) { return onKeyUp.call(cm, e); });
+ on(inp, "keydown", operation(cm, onKeyDown));
+ on(inp, "keypress", operation(cm, onKeyPress));
+ on(inp, "focus", function (e) { return onFocus(cm, e); });
+ on(inp, "blur", function (e) { return onBlur(cm, e); });
+}
+
+var initHooks = [];
+CodeMirror$1.defineInitHook = function (f) { return initHooks.push(f); };
+
+// Indent the given line. The how parameter can be "smart",
+// "add"/null, "subtract", or "prev". When aggressive is false
+// (typically set to true for forced single-line indents), empty
+// lines are not indented, and places where the mode returns Pass
+// are left alone.
+function indentLine(cm, n, how, aggressive) {
+ var doc = cm.doc, state;
+ if (how == null) { how = "add"; }
+ if (how == "smart") {
+ // Fall back to "prev" when the mode doesn't have an indentation
+ // method.
+ if (!doc.mode.indent) { how = "prev"; }
+ else { state = getContextBefore(cm, n).state; }
+ }
+
+ var tabSize = cm.options.tabSize;
+ var line = getLine(doc, n), curSpace = countColumn(line.text, null, tabSize);
+ if (line.stateAfter) { line.stateAfter = null; }
+ var curSpaceString = line.text.match(/^\s*/)[0], indentation;
+ if (!aggressive && !/\S/.test(line.text)) {
+ indentation = 0;
+ how = "not";
+ } else if (how == "smart") {
+ indentation = doc.mode.indent(state, line.text.slice(curSpaceString.length), line.text);
+ if (indentation == Pass || indentation > 150) {
+ if (!aggressive) { return }
+ how = "prev";
+ }
+ }
+ if (how == "prev") {
+ if (n > doc.first) { indentation = countColumn(getLine(doc, n-1).text, null, tabSize); }
+ else { indentation = 0; }
+ } else if (how == "add") {
+ indentation = curSpace + cm.options.indentUnit;
+ } else if (how == "subtract") {
+ indentation = curSpace - cm.options.indentUnit;
+ } else if (typeof how == "number") {
+ indentation = curSpace + how;
+ }
+ indentation = Math.max(0, indentation);
+
+ var indentString = "", pos = 0;
+ if (cm.options.indentWithTabs)
+ { for (var i = Math.floor(indentation / tabSize); i; --i) {pos += tabSize; indentString += "\t";} }
+ if (pos < indentation) { indentString += spaceStr(indentation - pos); }
+
+ if (indentString != curSpaceString) {
+ replaceRange(doc, indentString, Pos(n, 0), Pos(n, curSpaceString.length), "+input");
+ line.stateAfter = null;
+ return true
+ } else {
+ // Ensure that, if the cursor was in the whitespace at the start
+ // of the line, it is moved to the end of that space.
+ for (var i$1 = 0; i$1 < doc.sel.ranges.length; i$1++) {
+ var range = doc.sel.ranges[i$1];
+ if (range.head.line == n && range.head.ch < curSpaceString.length) {
+ var pos$1 = Pos(n, curSpaceString.length);
+ replaceOneSelection(doc, i$1, new Range(pos$1, pos$1));
+ break
+ }
+ }
+ }
+}
+
+// This will be set to a {lineWise: bool, text: [string]} object, so
+// that, when pasting, we know what kind of selections the copied
+// text was made out of.
+var lastCopied = null;
+
+function setLastCopied(newLastCopied) {
+ lastCopied = newLastCopied;
+}
+
+function applyTextInput(cm, inserted, deleted, sel, origin) {
+ var doc = cm.doc;
+ cm.display.shift = false;
+ if (!sel) { sel = doc.sel; }
+
+ var paste = cm.state.pasteIncoming || origin == "paste";
+ var textLines = splitLinesAuto(inserted), multiPaste = null;
+ // When pasing N lines into N selections, insert one line per selection
+ if (paste && sel.ranges.length > 1) {
+ if (lastCopied && lastCopied.text.join("\n") == inserted) {
+ if (sel.ranges.length % lastCopied.text.length == 0) {
+ multiPaste = [];
+ for (var i = 0; i < lastCopied.text.length; i++)
+ { multiPaste.push(doc.splitLines(lastCopied.text[i])); }
+ }
+ } else if (textLines.length == sel.ranges.length && cm.options.pasteLinesPerSelection) {
+ multiPaste = map(textLines, function (l) { return [l]; });
+ }
+ }
+
+ var updateInput;
+ // Normal behavior is to insert the new text into every selection
+ for (var i$1 = sel.ranges.length - 1; i$1 >= 0; i$1--) {
+ var range$$1 = sel.ranges[i$1];
+ var from = range$$1.from(), to = range$$1.to();
+ if (range$$1.empty()) {
+ if (deleted && deleted > 0) // Handle deletion
+ { from = Pos(from.line, from.ch - deleted); }
+ else if (cm.state.overwrite && !paste) // Handle overwrite
+ { to = Pos(to.line, Math.min(getLine(doc, to.line).text.length, to.ch + lst(textLines).length)); }
+ else if (lastCopied && lastCopied.lineWise && lastCopied.text.join("\n") == inserted)
+ { from = to = Pos(from.line, 0); }
+ }
+ updateInput = cm.curOp.updateInput;
+ var changeEvent = {from: from, to: to, text: multiPaste ? multiPaste[i$1 % multiPaste.length] : textLines,
+ origin: origin || (paste ? "paste" : cm.state.cutIncoming ? "cut" : "+input")};
+ makeChange(cm.doc, changeEvent);
+ signalLater(cm, "inputRead", cm, changeEvent);
+ }
+ if (inserted && !paste)
+ { triggerElectric(cm, inserted); }
+
+ ensureCursorVisible(cm);
+ cm.curOp.updateInput = updateInput;
+ cm.curOp.typing = true;
+ cm.state.pasteIncoming = cm.state.cutIncoming = false;
+}
+
+function handlePaste(e, cm) {
+ var pasted = e.clipboardData && e.clipboardData.getData("Text");
+ if (pasted) {
+ e.preventDefault();
+ if (!cm.isReadOnly() && !cm.options.disableInput)
+ { runInOp(cm, function () { return applyTextInput(cm, pasted, 0, null, "paste"); }); }
+ return true
+ }
+}
+
+function triggerElectric(cm, inserted) {
+ // When an 'electric' character is inserted, immediately trigger a reindent
+ if (!cm.options.electricChars || !cm.options.smartIndent) { return }
+ var sel = cm.doc.sel;
+
+ for (var i = sel.ranges.length - 1; i >= 0; i--) {
+ var range$$1 = sel.ranges[i];
+ if (range$$1.head.ch > 100 || (i && sel.ranges[i - 1].head.line == range$$1.head.line)) { continue }
+ var mode = cm.getModeAt(range$$1.head);
+ var indented = false;
+ if (mode.electricChars) {
+ for (var j = 0; j < mode.electricChars.length; j++)
+ { if (inserted.indexOf(mode.electricChars.charAt(j)) > -1) {
+ indented = indentLine(cm, range$$1.head.line, "smart");
+ break
+ } }
+ } else if (mode.electricInput) {
+ if (mode.electricInput.test(getLine(cm.doc, range$$1.head.line).text.slice(0, range$$1.head.ch)))
+ { indented = indentLine(cm, range$$1.head.line, "smart"); }
+ }
+ if (indented) { signalLater(cm, "electricInput", cm, range$$1.head.line); }
+ }
+}
+
+function copyableRanges(cm) {
+ var text = [], ranges = [];
+ for (var i = 0; i < cm.doc.sel.ranges.length; i++) {
+ var line = cm.doc.sel.ranges[i].head.line;
+ var lineRange = {anchor: Pos(line, 0), head: Pos(line + 1, 0)};
+ ranges.push(lineRange);
+ text.push(cm.getRange(lineRange.anchor, lineRange.head));
+ }
+ return {text: text, ranges: ranges}
+}
+
+function disableBrowserMagic(field, spellcheck) {
+ field.setAttribute("autocorrect", "off");
+ field.setAttribute("autocapitalize", "off");
+ field.setAttribute("spellcheck", !!spellcheck);
+}
+
+function hiddenTextarea() {
+ var te = elt("textarea", null, null, "position: absolute; bottom: -1em; padding: 0; width: 1px; height: 1em; outline: none");
+ var div = elt("div", [te], null, "overflow: hidden; position: relative; width: 3px; height: 0px;");
+ // The textarea is kept positioned near the cursor to prevent the
+ // fact that it'll be scrolled into view on input from scrolling
+ // our fake cursor out of view. On webkit, when wrap=off, paste is
+ // very slow. So make the area wide instead.
+ if (webkit) { te.style.width = "1000px"; }
+ else { te.setAttribute("wrap", "off"); }
+ // If border: 0; -- iOS fails to open keyboard (issue #1287)
+ if (ios) { te.style.border = "1px solid black"; }
+ disableBrowserMagic(te);
+ return div
+}
+
+// The publicly visible API. Note that methodOp(f) means
+// 'wrap f in an operation, performed on its `this` parameter'.
+
+// This is not the complete set of editor methods. Most of the
+// methods defined on the Doc type are also injected into
+// CodeMirror.prototype, for backwards compatibility and
+// convenience.
+
+var addEditorMethods = function(CodeMirror) {
+ var optionHandlers = CodeMirror.optionHandlers;
+
+ var helpers = CodeMirror.helpers = {};
+
+ CodeMirror.prototype = {
+ constructor: CodeMirror,
+ focus: function(){window.focus(); this.display.input.focus();},
+
+ setOption: function(option, value) {
+ var options = this.options, old = options[option];
+ if (options[option] == value && option != "mode") { return }
+ options[option] = value;
+ if (optionHandlers.hasOwnProperty(option))
+ { operation(this, optionHandlers[option])(this, value, old); }
+ signal(this, "optionChange", this, option);
+ },
+
+ getOption: function(option) {return this.options[option]},
+ getDoc: function() {return this.doc},
+
+ addKeyMap: function(map$$1, bottom) {
+ this.state.keyMaps[bottom ? "push" : "unshift"](getKeyMap(map$$1));
+ },
+ removeKeyMap: function(map$$1) {
+ var maps = this.state.keyMaps;
+ for (var i = 0; i < maps.length; ++i)
+ { if (maps[i] == map$$1 || maps[i].name == map$$1) {
+ maps.splice(i, 1);
+ return true
+ } }
+ },
+
+ addOverlay: methodOp(function(spec, options) {
+ var mode = spec.token ? spec : CodeMirror.getMode(this.options, spec);
+ if (mode.startState) { throw new Error("Overlays may not be stateful.") }
+ insertSorted(this.state.overlays,
+ {mode: mode, modeSpec: spec, opaque: options && options.opaque,
+ priority: (options && options.priority) || 0},
+ function (overlay) { return overlay.priority; });
+ this.state.modeGen++;
+ regChange(this);
+ }),
+ removeOverlay: methodOp(function(spec) {
+ var this$1 = this;
+
+ var overlays = this.state.overlays;
+ for (var i = 0; i < overlays.length; ++i) {
+ var cur = overlays[i].modeSpec;
+ if (cur == spec || typeof spec == "string" && cur.name == spec) {
+ overlays.splice(i, 1);
+ this$1.state.modeGen++;
+ regChange(this$1);
+ return
+ }
+ }
+ }),
+
+ indentLine: methodOp(function(n, dir, aggressive) {
+ if (typeof dir != "string" && typeof dir != "number") {
+ if (dir == null) { dir = this.options.smartIndent ? "smart" : "prev"; }
+ else { dir = dir ? "add" : "subtract"; }
+ }
+ if (isLine(this.doc, n)) { indentLine(this, n, dir, aggressive); }
+ }),
+ indentSelection: methodOp(function(how) {
+ var this$1 = this;
+
+ var ranges = this.doc.sel.ranges, end = -1;
+ for (var i = 0; i < ranges.length; i++) {
+ var range$$1 = ranges[i];
+ if (!range$$1.empty()) {
+ var from = range$$1.from(), to = range$$1.to();
+ var start = Math.max(end, from.line);
+ end = Math.min(this$1.lastLine(), to.line - (to.ch ? 0 : 1)) + 1;
+ for (var j = start; j < end; ++j)
+ { indentLine(this$1, j, how); }
+ var newRanges = this$1.doc.sel.ranges;
+ if (from.ch == 0 && ranges.length == newRanges.length && newRanges[i].from().ch > 0)
+ { replaceOneSelection(this$1.doc, i, new Range(from, newRanges[i].to()), sel_dontScroll); }
+ } else if (range$$1.head.line > end) {
+ indentLine(this$1, range$$1.head.line, how, true);
+ end = range$$1.head.line;
+ if (i == this$1.doc.sel.primIndex) { ensureCursorVisible(this$1); }
+ }
+ }
+ }),
+
+ // Fetch the parser token for a given character. Useful for hacks
+ // that want to inspect the mode state (say, for completion).
+ getTokenAt: function(pos, precise) {
+ return takeToken(this, pos, precise)
+ },
+
+ getLineTokens: function(line, precise) {
+ return takeToken(this, Pos(line), precise, true)
+ },
+
+ getTokenTypeAt: function(pos) {
+ pos = clipPos(this.doc, pos);
+ var styles = getLineStyles(this, getLine(this.doc, pos.line));
+ var before = 0, after = (styles.length - 1) / 2, ch = pos.ch;
+ var type;
+ if (ch == 0) { type = styles[2]; }
+ else { for (;;) {
+ var mid = (before + after) >> 1;
+ if ((mid ? styles[mid * 2 - 1] : 0) >= ch) { after = mid; }
+ else if (styles[mid * 2 + 1] < ch) { before = mid + 1; }
+ else { type = styles[mid * 2 + 2]; break }
+ } }
+ var cut = type ? type.indexOf("overlay ") : -1;
+ return cut < 0 ? type : cut == 0 ? null : type.slice(0, cut - 1)
+ },
+
+ getModeAt: function(pos) {
+ var mode = this.doc.mode;
+ if (!mode.innerMode) { return mode }
+ return CodeMirror.innerMode(mode, this.getTokenAt(pos).state).mode
+ },
+
+ getHelper: function(pos, type) {
+ return this.getHelpers(pos, type)[0]
+ },
+
+ getHelpers: function(pos, type) {
+ var this$1 = this;
+
+ var found = [];
+ if (!helpers.hasOwnProperty(type)) { return found }
+ var help = helpers[type], mode = this.getModeAt(pos);
+ if (typeof mode[type] == "string") {
+ if (help[mode[type]]) { found.push(help[mode[type]]); }
+ } else if (mode[type]) {
+ for (var i = 0; i < mode[type].length; i++) {
+ var val = help[mode[type][i]];
+ if (val) { found.push(val); }
+ }
+ } else if (mode.helperType && help[mode.helperType]) {
+ found.push(help[mode.helperType]);
+ } else if (help[mode.name]) {
+ found.push(help[mode.name]);
+ }
+ for (var i$1 = 0; i$1 < help._global.length; i$1++) {
+ var cur = help._global[i$1];
+ if (cur.pred(mode, this$1) && indexOf(found, cur.val) == -1)
+ { found.push(cur.val); }
+ }
+ return found
+ },
+
+ getStateAfter: function(line, precise) {
+ var doc = this.doc;
+ line = clipLine(doc, line == null ? doc.first + doc.size - 1: line);
+ return getContextBefore(this, line + 1, precise).state
+ },
+
+ cursorCoords: function(start, mode) {
+ var pos, range$$1 = this.doc.sel.primary();
+ if (start == null) { pos = range$$1.head; }
+ else if (typeof start == "object") { pos = clipPos(this.doc, start); }
+ else { pos = start ? range$$1.from() : range$$1.to(); }
+ return cursorCoords(this, pos, mode || "page")
+ },
+
+ charCoords: function(pos, mode) {
+ return charCoords(this, clipPos(this.doc, pos), mode || "page")
+ },
+
+ coordsChar: function(coords, mode) {
+ coords = fromCoordSystem(this, coords, mode || "page");
+ return coordsChar(this, coords.left, coords.top)
+ },
+
+ lineAtHeight: function(height, mode) {
+ height = fromCoordSystem(this, {top: height, left: 0}, mode || "page").top;
+ return lineAtHeight(this.doc, height + this.display.viewOffset)
+ },
+ heightAtLine: function(line, mode, includeWidgets) {
+ var end = false, lineObj;
+ if (typeof line == "number") {
+ var last = this.doc.first + this.doc.size - 1;
+ if (line < this.doc.first) { line = this.doc.first; }
+ else if (line > last) { line = last; end = true; }
+ lineObj = getLine(this.doc, line);
+ } else {
+ lineObj = line;
+ }
+ return intoCoordSystem(this, lineObj, {top: 0, left: 0}, mode || "page", includeWidgets || end).top +
+ (end ? this.doc.height - heightAtLine(lineObj) : 0)
+ },
+
+ defaultTextHeight: function() { return textHeight(this.display) },
+ defaultCharWidth: function() { return charWidth(this.display) },
+
+ getViewport: function() { return {from: this.display.viewFrom, to: this.display.viewTo}},
+
+ addWidget: function(pos, node, scroll, vert, horiz) {
+ var display = this.display;
+ pos = cursorCoords(this, clipPos(this.doc, pos));
+ var top = pos.bottom, left = pos.left;
+ node.style.position = "absolute";
+ node.setAttribute("cm-ignore-events", "true");
+ this.display.input.setUneditable(node);
+ display.sizer.appendChild(node);
+ if (vert == "over") {
+ top = pos.top;
+ } else if (vert == "above" || vert == "near") {
+ var vspace = Math.max(display.wrapper.clientHeight, this.doc.height),
+ hspace = Math.max(display.sizer.clientWidth, display.lineSpace.clientWidth);
+ // Default to positioning above (if specified and possible); otherwise default to positioning below
+ if ((vert == 'above' || pos.bottom + node.offsetHeight > vspace) && pos.top > node.offsetHeight)
+ { top = pos.top - node.offsetHeight; }
+ else if (pos.bottom + node.offsetHeight <= vspace)
+ { top = pos.bottom; }
+ if (left + node.offsetWidth > hspace)
+ { left = hspace - node.offsetWidth; }
+ }
+ node.style.top = top + "px";
+ node.style.left = node.style.right = "";
+ if (horiz == "right") {
+ left = display.sizer.clientWidth - node.offsetWidth;
+ node.style.right = "0px";
+ } else {
+ if (horiz == "left") { left = 0; }
+ else if (horiz == "middle") { left = (display.sizer.clientWidth - node.offsetWidth) / 2; }
+ node.style.left = left + "px";
+ }
+ if (scroll)
+ { scrollIntoView(this, {left: left, top: top, right: left + node.offsetWidth, bottom: top + node.offsetHeight}); }
+ },
+
+ triggerOnKeyDown: methodOp(onKeyDown),
+ triggerOnKeyPress: methodOp(onKeyPress),
+ triggerOnKeyUp: onKeyUp,
+ triggerOnMouseDown: methodOp(onMouseDown),
+
+ execCommand: function(cmd) {
+ if (commands.hasOwnProperty(cmd))
+ { return commands[cmd].call(null, this) }
+ },
+
+ triggerElectric: methodOp(function(text) { triggerElectric(this, text); }),
+
+ findPosH: function(from, amount, unit, visually) {
+ var this$1 = this;
+
+ var dir = 1;
+ if (amount < 0) { dir = -1; amount = -amount; }
+ var cur = clipPos(this.doc, from);
+ for (var i = 0; i < amount; ++i) {
+ cur = findPosH(this$1.doc, cur, dir, unit, visually);
+ if (cur.hitSide) { break }
+ }
+ return cur
+ },
+
+ moveH: methodOp(function(dir, unit) {
+ var this$1 = this;
+
+ this.extendSelectionsBy(function (range$$1) {
+ if (this$1.display.shift || this$1.doc.extend || range$$1.empty())
+ { return findPosH(this$1.doc, range$$1.head, dir, unit, this$1.options.rtlMoveVisually) }
+ else
+ { return dir < 0 ? range$$1.from() : range$$1.to() }
+ }, sel_move);
+ }),
+
+ deleteH: methodOp(function(dir, unit) {
+ var sel = this.doc.sel, doc = this.doc;
+ if (sel.somethingSelected())
+ { doc.replaceSelection("", null, "+delete"); }
+ else
+ { deleteNearSelection(this, function (range$$1) {
+ var other = findPosH(doc, range$$1.head, dir, unit, false);
+ return dir < 0 ? {from: other, to: range$$1.head} : {from: range$$1.head, to: other}
+ }); }
+ }),
+
+ findPosV: function(from, amount, unit, goalColumn) {
+ var this$1 = this;
+
+ var dir = 1, x = goalColumn;
+ if (amount < 0) { dir = -1; amount = -amount; }
+ var cur = clipPos(this.doc, from);
+ for (var i = 0; i < amount; ++i) {
+ var coords = cursorCoords(this$1, cur, "div");
+ if (x == null) { x = coords.left; }
+ else { coords.left = x; }
+ cur = findPosV(this$1, coords, dir, unit);
+ if (cur.hitSide) { break }
+ }
+ return cur
+ },
+
+ moveV: methodOp(function(dir, unit) {
+ var this$1 = this;
+
+ var doc = this.doc, goals = [];
+ var collapse = !this.display.shift && !doc.extend && doc.sel.somethingSelected();
+ doc.extendSelectionsBy(function (range$$1) {
+ if (collapse)
+ { return dir < 0 ? range$$1.from() : range$$1.to() }
+ var headPos = cursorCoords(this$1, range$$1.head, "div");
+ if (range$$1.goalColumn != null) { headPos.left = range$$1.goalColumn; }
+ goals.push(headPos.left);
+ var pos = findPosV(this$1, headPos, dir, unit);
+ if (unit == "page" && range$$1 == doc.sel.primary())
+ { addToScrollTop(this$1, charCoords(this$1, pos, "div").top - headPos.top); }
+ return pos
+ }, sel_move);
+ if (goals.length) { for (var i = 0; i < doc.sel.ranges.length; i++)
+ { doc.sel.ranges[i].goalColumn = goals[i]; } }
+ }),
+
+ // Find the word at the given position (as returned by coordsChar).
+ findWordAt: function(pos) {
+ var doc = this.doc, line = getLine(doc, pos.line).text;
+ var start = pos.ch, end = pos.ch;
+ if (line) {
+ var helper = this.getHelper(pos, "wordChars");
+ if ((pos.sticky == "before" || end == line.length) && start) { --start; } else { ++end; }
+ var startChar = line.charAt(start);
+ var check = isWordChar(startChar, helper)
+ ? function (ch) { return isWordChar(ch, helper); }
+ : /\s/.test(startChar) ? function (ch) { return /\s/.test(ch); }
+ : function (ch) { return (!/\s/.test(ch) && !isWordChar(ch)); };
+ while (start > 0 && check(line.charAt(start - 1))) { --start; }
+ while (end < line.length && check(line.charAt(end))) { ++end; }
+ }
+ return new Range(Pos(pos.line, start), Pos(pos.line, end))
+ },
+
+ toggleOverwrite: function(value) {
+ if (value != null && value == this.state.overwrite) { return }
+ if (this.state.overwrite = !this.state.overwrite)
+ { addClass(this.display.cursorDiv, "CodeMirror-overwrite"); }
+ else
+ { rmClass(this.display.cursorDiv, "CodeMirror-overwrite"); }
+
+ signal(this, "overwriteToggle", this, this.state.overwrite);
+ },
+ hasFocus: function() { return this.display.input.getField() == activeElt() },
+ isReadOnly: function() { return !!(this.options.readOnly || this.doc.cantEdit) },
+
+ scrollTo: methodOp(function (x, y) { scrollToCoords(this, x, y); }),
+ getScrollInfo: function() {
+ var scroller = this.display.scroller;
+ return {left: scroller.scrollLeft, top: scroller.scrollTop,
+ height: scroller.scrollHeight - scrollGap(this) - this.display.barHeight,
+ width: scroller.scrollWidth - scrollGap(this) - this.display.barWidth,
+ clientHeight: displayHeight(this), clientWidth: displayWidth(this)}
+ },
+
+ scrollIntoView: methodOp(function(range$$1, margin) {
+ if (range$$1 == null) {
+ range$$1 = {from: this.doc.sel.primary().head, to: null};
+ if (margin == null) { margin = this.options.cursorScrollMargin; }
+ } else if (typeof range$$1 == "number") {
+ range$$1 = {from: Pos(range$$1, 0), to: null};
+ } else if (range$$1.from == null) {
+ range$$1 = {from: range$$1, to: null};
+ }
+ if (!range$$1.to) { range$$1.to = range$$1.from; }
+ range$$1.margin = margin || 0;
+
+ if (range$$1.from.line != null) {
+ scrollToRange(this, range$$1);
+ } else {
+ scrollToCoordsRange(this, range$$1.from, range$$1.to, range$$1.margin);
+ }
+ }),
+
+ setSize: methodOp(function(width, height) {
+ var this$1 = this;
+
+ var interpret = function (val) { return typeof val == "number" || /^\d+$/.test(String(val)) ? val + "px" : val; };
+ if (width != null) { this.display.wrapper.style.width = interpret(width); }
+ if (height != null) { this.display.wrapper.style.height = interpret(height); }
+ if (this.options.lineWrapping) { clearLineMeasurementCache(this); }
+ var lineNo$$1 = this.display.viewFrom;
+ this.doc.iter(lineNo$$1, this.display.viewTo, function (line) {
+ if (line.widgets) { for (var i = 0; i < line.widgets.length; i++)
+ { if (line.widgets[i].noHScroll) { regLineChange(this$1, lineNo$$1, "widget"); break } } }
+ ++lineNo$$1;
+ });
+ this.curOp.forceUpdate = true;
+ signal(this, "refresh", this);
+ }),
+
+ operation: function(f){return runInOp(this, f)},
+ startOperation: function(){return startOperation(this)},
+ endOperation: function(){return endOperation(this)},
+
+ refresh: methodOp(function() {
+ var oldHeight = this.display.cachedTextHeight;
+ regChange(this);
+ this.curOp.forceUpdate = true;
+ clearCaches(this);
+ scrollToCoords(this, this.doc.scrollLeft, this.doc.scrollTop);
+ updateGutterSpace(this);
+ if (oldHeight == null || Math.abs(oldHeight - textHeight(this.display)) > .5)
+ { estimateLineHeights(this); }
+ signal(this, "refresh", this);
+ }),
+
+ swapDoc: methodOp(function(doc) {
+ var old = this.doc;
+ old.cm = null;
+ attachDoc(this, doc);
+ clearCaches(this);
+ this.display.input.reset();
+ scrollToCoords(this, doc.scrollLeft, doc.scrollTop);
+ this.curOp.forceScroll = true;
+ signalLater(this, "swapDoc", this, old);
+ return old
+ }),
+
+ getInputField: function(){return this.display.input.getField()},
+ getWrapperElement: function(){return this.display.wrapper},
+ getScrollerElement: function(){return this.display.scroller},
+ getGutterElement: function(){return this.display.gutters}
+ };
+ eventMixin(CodeMirror);
+
+ CodeMirror.registerHelper = function(type, name, value) {
+ if (!helpers.hasOwnProperty(type)) { helpers[type] = CodeMirror[type] = {_global: []}; }
+ helpers[type][name] = value;
+ };
+ CodeMirror.registerGlobalHelper = function(type, name, predicate, value) {
+ CodeMirror.registerHelper(type, name, value);
+ helpers[type]._global.push({pred: predicate, val: value});
+ };
+};
+
+// Used for horizontal relative motion. Dir is -1 or 1 (left or
+// right), unit can be "char", "column" (like char, but doesn't
+// cross line boundaries), "word" (across next word), or "group" (to
+// the start of next group of word or non-word-non-whitespace
+// chars). The visually param controls whether, in right-to-left
+// text, direction 1 means to move towards the next index in the
+// string, or towards the character to the right of the current
+// position. The resulting position will have a hitSide=true
+// property if it reached the end of the document.
+function findPosH(doc, pos, dir, unit, visually) {
+ var oldPos = pos;
+ var origDir = dir;
+ var lineObj = getLine(doc, pos.line);
+ function findNextLine() {
+ var l = pos.line + dir;
+ if (l < doc.first || l >= doc.first + doc.size) { return false }
+ pos = new Pos(l, pos.ch, pos.sticky);
+ return lineObj = getLine(doc, l)
+ }
+ function moveOnce(boundToLine) {
+ var next;
+ if (visually) {
+ next = moveVisually(doc.cm, lineObj, pos, dir);
+ } else {
+ next = moveLogically(lineObj, pos, dir);
+ }
+ if (next == null) {
+ if (!boundToLine && findNextLine())
+ { pos = endOfLine(visually, doc.cm, lineObj, pos.line, dir); }
+ else
+ { return false }
+ } else {
+ pos = next;
+ }
+ return true
+ }
+
+ if (unit == "char") {
+ moveOnce();
+ } else if (unit == "column") {
+ moveOnce(true);
+ } else if (unit == "word" || unit == "group") {
+ var sawType = null, group = unit == "group";
+ var helper = doc.cm && doc.cm.getHelper(pos, "wordChars");
+ for (var first = true;; first = false) {
+ if (dir < 0 && !moveOnce(!first)) { break }
+ var cur = lineObj.text.charAt(pos.ch) || "\n";
+ var type = isWordChar(cur, helper) ? "w"
+ : group && cur == "\n" ? "n"
+ : !group || /\s/.test(cur) ? null
+ : "p";
+ if (group && !first && !type) { type = "s"; }
+ if (sawType && sawType != type) {
+ if (dir < 0) {dir = 1; moveOnce(); pos.sticky = "after";}
+ break
+ }
+
+ if (type) { sawType = type; }
+ if (dir > 0 && !moveOnce(!first)) { break }
+ }
+ }
+ var result = skipAtomic(doc, pos, oldPos, origDir, true);
+ if (equalCursorPos(oldPos, result)) { result.hitSide = true; }
+ return result
+}
+
+// For relative vertical movement. Dir may be -1 or 1. Unit can be
+// "page" or "line". The resulting position will have a hitSide=true
+// property if it reached the end of the document.
+function findPosV(cm, pos, dir, unit) {
+ var doc = cm.doc, x = pos.left, y;
+ if (unit == "page") {
+ var pageSize = Math.min(cm.display.wrapper.clientHeight, window.innerHeight || document.documentElement.clientHeight);
+ var moveAmount = Math.max(pageSize - .5 * textHeight(cm.display), 3);
+ y = (dir > 0 ? pos.bottom : pos.top) + dir * moveAmount;
+
+ } else if (unit == "line") {
+ y = dir > 0 ? pos.bottom + 3 : pos.top - 3;
+ }
+ var target;
+ for (;;) {
+ target = coordsChar(cm, x, y);
+ if (!target.outside) { break }
+ if (dir < 0 ? y <= 0 : y >= doc.height) { target.hitSide = true; break }
+ y += dir * 5;
+ }
+ return target
+}
+
+// CONTENTEDITABLE INPUT STYLE
+
+var ContentEditableInput = function(cm) {
+ this.cm = cm;
+ this.lastAnchorNode = this.lastAnchorOffset = this.lastFocusNode = this.lastFocusOffset = null;
+ this.polling = new Delayed();
+ this.composing = null;
+ this.gracePeriod = false;
+ this.readDOMTimeout = null;
+};
+
+ContentEditableInput.prototype.init = function (display) {
+ var this$1 = this;
+
+ var input = this, cm = input.cm;
+ var div = input.div = display.lineDiv;
+ disableBrowserMagic(div, cm.options.spellcheck);
+
+ on(div, "paste", function (e) {
+ if (signalDOMEvent(cm, e) || handlePaste(e, cm)) { return }
+ // IE doesn't fire input events, so we schedule a read for the pasted content in this way
+ if (ie_version <= 11) { setTimeout(operation(cm, function () { return this$1.updateFromDOM(); }), 20); }
+ });
+
+ on(div, "compositionstart", function (e) {
+ this$1.composing = {data: e.data, done: false};
+ });
+ on(div, "compositionupdate", function (e) {
+ if (!this$1.composing) { this$1.composing = {data: e.data, done: false}; }
+ });
+ on(div, "compositionend", function (e) {
+ if (this$1.composing) {
+ if (e.data != this$1.composing.data) { this$1.readFromDOMSoon(); }
+ this$1.composing.done = true;
+ }
+ });
+
+ on(div, "touchstart", function () { return input.forceCompositionEnd(); });
+
+ on(div, "input", function () {
+ if (!this$1.composing) { this$1.readFromDOMSoon(); }
+ });
+
+ function onCopyCut(e) {
+ if (signalDOMEvent(cm, e)) { return }
+ if (cm.somethingSelected()) {
+ setLastCopied({lineWise: false, text: cm.getSelections()});
+ if (e.type == "cut") { cm.replaceSelection("", null, "cut"); }
+ } else if (!cm.options.lineWiseCopyCut) {
+ return
+ } else {
+ var ranges = copyableRanges(cm);
+ setLastCopied({lineWise: true, text: ranges.text});
+ if (e.type == "cut") {
+ cm.operation(function () {
+ cm.setSelections(ranges.ranges, 0, sel_dontScroll);
+ cm.replaceSelection("", null, "cut");
+ });
+ }
+ }
+ if (e.clipboardData) {
+ e.clipboardData.clearData();
+ var content = lastCopied.text.join("\n");
+ // iOS exposes the clipboard API, but seems to discard content inserted into it
+ e.clipboardData.setData("Text", content);
+ if (e.clipboardData.getData("Text") == content) {
+ e.preventDefault();
+ return
+ }
+ }
+ // Old-fashioned briefly-focus-a-textarea hack
+ var kludge = hiddenTextarea(), te = kludge.firstChild;
+ cm.display.lineSpace.insertBefore(kludge, cm.display.lineSpace.firstChild);
+ te.value = lastCopied.text.join("\n");
+ var hadFocus = document.activeElement;
+ selectInput(te);
+ setTimeout(function () {
+ cm.display.lineSpace.removeChild(kludge);
+ hadFocus.focus();
+ if (hadFocus == div) { input.showPrimarySelection(); }
+ }, 50);
+ }
+ on(div, "copy", onCopyCut);
+ on(div, "cut", onCopyCut);
+};
+
+ContentEditableInput.prototype.prepareSelection = function () {
+ var result = prepareSelection(this.cm, false);
+ result.focus = this.cm.state.focused;
+ return result
+};
+
+ContentEditableInput.prototype.showSelection = function (info, takeFocus) {
+ if (!info || !this.cm.display.view.length) { return }
+ if (info.focus || takeFocus) { this.showPrimarySelection(); }
+ this.showMultipleSelections(info);
+};
+
+ContentEditableInput.prototype.showPrimarySelection = function () {
+ var sel = window.getSelection(), cm = this.cm, prim = cm.doc.sel.primary();
+ var from = prim.from(), to = prim.to();
+
+ if (cm.display.viewTo == cm.display.viewFrom || from.line >= cm.display.viewTo || to.line < cm.display.viewFrom) {
+ sel.removeAllRanges();
+ return
+ }
+
+ var curAnchor = domToPos(cm, sel.anchorNode, sel.anchorOffset);
+ var curFocus = domToPos(cm, sel.focusNode, sel.focusOffset);
+ if (curAnchor && !curAnchor.bad && curFocus && !curFocus.bad &&
+ cmp(minPos(curAnchor, curFocus), from) == 0 &&
+ cmp(maxPos(curAnchor, curFocus), to) == 0)
+ { return }
+
+ var view = cm.display.view;
+ var start = (from.line >= cm.display.viewFrom && posToDOM(cm, from)) ||
+ {node: view[0].measure.map[2], offset: 0};
+ var end = to.line < cm.display.viewTo && posToDOM(cm, to);
+ if (!end) {
+ var measure = view[view.length - 1].measure;
+ var map$$1 = measure.maps ? measure.maps[measure.maps.length - 1] : measure.map;
+ end = {node: map$$1[map$$1.length - 1], offset: map$$1[map$$1.length - 2] - map$$1[map$$1.length - 3]};
+ }
+
+ if (!start || !end) {
+ sel.removeAllRanges();
+ return
+ }
+
+ var old = sel.rangeCount && sel.getRangeAt(0), rng;
+ try { rng = range(start.node, start.offset, end.offset, end.node); }
+ catch(e) {} // Our model of the DOM might be outdated, in which case the range we try to set can be impossible
+ if (rng) {
+ if (!gecko && cm.state.focused) {
+ sel.collapse(start.node, start.offset);
+ if (!rng.collapsed) {
+ sel.removeAllRanges();
+ sel.addRange(rng);
+ }
+ } else {
+ sel.removeAllRanges();
+ sel.addRange(rng);
+ }
+ if (old && sel.anchorNode == null) { sel.addRange(old); }
+ else if (gecko) { this.startGracePeriod(); }
+ }
+ this.rememberSelection();
+};
+
+ContentEditableInput.prototype.startGracePeriod = function () {
+ var this$1 = this;
+
+ clearTimeout(this.gracePeriod);
+ this.gracePeriod = setTimeout(function () {
+ this$1.gracePeriod = false;
+ if (this$1.selectionChanged())
+ { this$1.cm.operation(function () { return this$1.cm.curOp.selectionChanged = true; }); }
+ }, 20);
+};
+
+ContentEditableInput.prototype.showMultipleSelections = function (info) {
+ removeChildrenAndAdd(this.cm.display.cursorDiv, info.cursors);
+ removeChildrenAndAdd(this.cm.display.selectionDiv, info.selection);
+};
+
+ContentEditableInput.prototype.rememberSelection = function () {
+ var sel = window.getSelection();
+ this.lastAnchorNode = sel.anchorNode; this.lastAnchorOffset = sel.anchorOffset;
+ this.lastFocusNode = sel.focusNode; this.lastFocusOffset = sel.focusOffset;
+};
+
+ContentEditableInput.prototype.selectionInEditor = function () {
+ var sel = window.getSelection();
+ if (!sel.rangeCount) { return false }
+ var node = sel.getRangeAt(0).commonAncestorContainer;
+ return contains(this.div, node)
+};
+
+ContentEditableInput.prototype.focus = function () {
+ if (this.cm.options.readOnly != "nocursor") {
+ if (!this.selectionInEditor())
+ { this.showSelection(this.prepareSelection(), true); }
+ this.div.focus();
+ }
+};
+ContentEditableInput.prototype.blur = function () { this.div.blur(); };
+ContentEditableInput.prototype.getField = function () { return this.div };
+
+ContentEditableInput.prototype.supportsTouch = function () { return true };
+
+ContentEditableInput.prototype.receivedFocus = function () {
+ var input = this;
+ if (this.selectionInEditor())
+ { this.pollSelection(); }
+ else
+ { runInOp(this.cm, function () { return input.cm.curOp.selectionChanged = true; }); }
+
+ function poll() {
+ if (input.cm.state.focused) {
+ input.pollSelection();
+ input.polling.set(input.cm.options.pollInterval, poll);
+ }
+ }
+ this.polling.set(this.cm.options.pollInterval, poll);
+};
+
+ContentEditableInput.prototype.selectionChanged = function () {
+ var sel = window.getSelection();
+ return sel.anchorNode != this.lastAnchorNode || sel.anchorOffset != this.lastAnchorOffset ||
+ sel.focusNode != this.lastFocusNode || sel.focusOffset != this.lastFocusOffset
+};
+
+ContentEditableInput.prototype.pollSelection = function () {
+ if (this.readDOMTimeout != null || this.gracePeriod || !this.selectionChanged()) { return }
+ var sel = window.getSelection(), cm = this.cm;
+ // On Android Chrome (version 56, at least), backspacing into an
+ // uneditable block element will put the cursor in that element,
+ // and then, because it's not editable, hide the virtual keyboard.
+ // Because Android doesn't allow us to actually detect backspace
+ // presses in a sane way, this code checks for when that happens
+ // and simulates a backspace press in this case.
+ if (android && chrome && this.cm.options.gutters.length && isInGutter(sel.anchorNode)) {
+ this.cm.triggerOnKeyDown({type: "keydown", keyCode: 8, preventDefault: Math.abs});
+ this.blur();
+ this.focus();
+ return
+ }
+ if (this.composing) { return }
+ this.rememberSelection();
+ var anchor = domToPos(cm, sel.anchorNode, sel.anchorOffset);
+ var head = domToPos(cm, sel.focusNode, sel.focusOffset);
+ if (anchor && head) { runInOp(cm, function () {
+ setSelection(cm.doc, simpleSelection(anchor, head), sel_dontScroll);
+ if (anchor.bad || head.bad) { cm.curOp.selectionChanged = true; }
+ }); }
+};
+
+ContentEditableInput.prototype.pollContent = function () {
+ if (this.readDOMTimeout != null) {
+ clearTimeout(this.readDOMTimeout);
+ this.readDOMTimeout = null;
+ }
+
+ var cm = this.cm, display = cm.display, sel = cm.doc.sel.primary();
+ var from = sel.from(), to = sel.to();
+ if (from.ch == 0 && from.line > cm.firstLine())
+ { from = Pos(from.line - 1, getLine(cm.doc, from.line - 1).length); }
+ if (to.ch == getLine(cm.doc, to.line).text.length && to.line < cm.lastLine())
+ { to = Pos(to.line + 1, 0); }
+ if (from.line < display.viewFrom || to.line > display.viewTo - 1) { return false }
+
+ var fromIndex, fromLine, fromNode;
+ if (from.line == display.viewFrom || (fromIndex = findViewIndex(cm, from.line)) == 0) {
+ fromLine = lineNo(display.view[0].line);
+ fromNode = display.view[0].node;
+ } else {
+ fromLine = lineNo(display.view[fromIndex].line);
+ fromNode = display.view[fromIndex - 1].node.nextSibling;
+ }
+ var toIndex = findViewIndex(cm, to.line);
+ var toLine, toNode;
+ if (toIndex == display.view.length - 1) {
+ toLine = display.viewTo - 1;
+ toNode = display.lineDiv.lastChild;
+ } else {
+ toLine = lineNo(display.view[toIndex + 1].line) - 1;
+ toNode = display.view[toIndex + 1].node.previousSibling;
+ }
+
+ if (!fromNode) { return false }
+ var newText = cm.doc.splitLines(domTextBetween(cm, fromNode, toNode, fromLine, toLine));
+ var oldText = getBetween(cm.doc, Pos(fromLine, 0), Pos(toLine, getLine(cm.doc, toLine).text.length));
+ while (newText.length > 1 && oldText.length > 1) {
+ if (lst(newText) == lst(oldText)) { newText.pop(); oldText.pop(); toLine--; }
+ else if (newText[0] == oldText[0]) { newText.shift(); oldText.shift(); fromLine++; }
+ else { break }
+ }
+
+ var cutFront = 0, cutEnd = 0;
+ var newTop = newText[0], oldTop = oldText[0], maxCutFront = Math.min(newTop.length, oldTop.length);
+ while (cutFront < maxCutFront && newTop.charCodeAt(cutFront) == oldTop.charCodeAt(cutFront))
+ { ++cutFront; }
+ var newBot = lst(newText), oldBot = lst(oldText);
+ var maxCutEnd = Math.min(newBot.length - (newText.length == 1 ? cutFront : 0),
+ oldBot.length - (oldText.length == 1 ? cutFront : 0));
+ while (cutEnd < maxCutEnd &&
+ newBot.charCodeAt(newBot.length - cutEnd - 1) == oldBot.charCodeAt(oldBot.length - cutEnd - 1))
+ { ++cutEnd; }
+ // Try to move start of change to start of selection if ambiguous
+ if (newText.length == 1 && oldText.length == 1 && fromLine == from.line) {
+ while (cutFront && cutFront > from.ch &&
+ newBot.charCodeAt(newBot.length - cutEnd - 1) == oldBot.charCodeAt(oldBot.length - cutEnd - 1)) {
+ cutFront--;
+ cutEnd++;
+ }
+ }
+
+ newText[newText.length - 1] = newBot.slice(0, newBot.length - cutEnd).replace(/^\u200b+/, "");
+ newText[0] = newText[0].slice(cutFront).replace(/\u200b+$/, "");
+
+ var chFrom = Pos(fromLine, cutFront);
+ var chTo = Pos(toLine, oldText.length ? lst(oldText).length - cutEnd : 0);
+ if (newText.length > 1 || newText[0] || cmp(chFrom, chTo)) {
+ replaceRange(cm.doc, newText, chFrom, chTo, "+input");
+ return true
+ }
+};
+
+ContentEditableInput.prototype.ensurePolled = function () {
+ this.forceCompositionEnd();
+};
+ContentEditableInput.prototype.reset = function () {
+ this.forceCompositionEnd();
+};
+ContentEditableInput.prototype.forceCompositionEnd = function () {
+ if (!this.composing) { return }
+ clearTimeout(this.readDOMTimeout);
+ this.composing = null;
+ this.updateFromDOM();
+ this.div.blur();
+ this.div.focus();
+};
+ContentEditableInput.prototype.readFromDOMSoon = function () {
+ var this$1 = this;
+
+ if (this.readDOMTimeout != null) { return }
+ this.readDOMTimeout = setTimeout(function () {
+ this$1.readDOMTimeout = null;
+ if (this$1.composing) {
+ if (this$1.composing.done) { this$1.composing = null; }
+ else { return }
+ }
+ this$1.updateFromDOM();
+ }, 80);
+};
+
+ContentEditableInput.prototype.updateFromDOM = function () {
+ var this$1 = this;
+
+ if (this.cm.isReadOnly() || !this.pollContent())
+ { runInOp(this.cm, function () { return regChange(this$1.cm); }); }
+};
+
+ContentEditableInput.prototype.setUneditable = function (node) {
+ node.contentEditable = "false";
+};
+
+ContentEditableInput.prototype.onKeyPress = function (e) {
+ if (e.charCode == 0) { return }
+ e.preventDefault();
+ if (!this.cm.isReadOnly())
+ { operation(this.cm, applyTextInput)(this.cm, String.fromCharCode(e.charCode == null ? e.keyCode : e.charCode), 0); }
+};
+
+ContentEditableInput.prototype.readOnlyChanged = function (val) {
+ this.div.contentEditable = String(val != "nocursor");
+};
+
+ContentEditableInput.prototype.onContextMenu = function () {};
+ContentEditableInput.prototype.resetPosition = function () {};
+
+ContentEditableInput.prototype.needsContentAttribute = true;
+
+function posToDOM(cm, pos) {
+ var view = findViewForLine(cm, pos.line);
+ if (!view || view.hidden) { return null }
+ var line = getLine(cm.doc, pos.line);
+ var info = mapFromLineView(view, line, pos.line);
+
+ var order = getOrder(line, cm.doc.direction), side = "left";
+ if (order) {
+ var partPos = getBidiPartAt(order, pos.ch);
+ side = partPos % 2 ? "right" : "left";
+ }
+ var result = nodeAndOffsetInLineMap(info.map, pos.ch, side);
+ result.offset = result.collapse == "right" ? result.end : result.start;
+ return result
+}
+
+function isInGutter(node) {
+ for (var scan = node; scan; scan = scan.parentNode)
+ { if (/CodeMirror-gutter-wrapper/.test(scan.className)) { return true } }
+ return false
+}
+
+function badPos(pos, bad) { if (bad) { pos.bad = true; } return pos }
+
+function domTextBetween(cm, from, to, fromLine, toLine) {
+ var text = "", closing = false, lineSep = cm.doc.lineSeparator();
+ function recognizeMarker(id) { return function (marker) { return marker.id == id; } }
+ function close() {
+ if (closing) {
+ text += lineSep;
+ closing = false;
+ }
+ }
+ function addText(str) {
+ if (str) {
+ close();
+ text += str;
+ }
+ }
+ function walk(node) {
+ if (node.nodeType == 1) {
+ var cmText = node.getAttribute("cm-text");
+ if (cmText != null) {
+ addText(cmText || node.textContent.replace(/\u200b/g, ""));
+ return
+ }
+ var markerID = node.getAttribute("cm-marker"), range$$1;
+ if (markerID) {
+ var found = cm.findMarks(Pos(fromLine, 0), Pos(toLine + 1, 0), recognizeMarker(+markerID));
+ if (found.length && (range$$1 = found[0].find(0)))
+ { addText(getBetween(cm.doc, range$$1.from, range$$1.to).join(lineSep)); }
+ return
+ }
+ if (node.getAttribute("contenteditable") == "false") { return }
+ var isBlock = /^(pre|div|p)$/i.test(node.nodeName);
+ if (isBlock) { close(); }
+ for (var i = 0; i < node.childNodes.length; i++)
+ { walk(node.childNodes[i]); }
+ if (isBlock) { closing = true; }
+ } else if (node.nodeType == 3) {
+ addText(node.nodeValue);
+ }
+ }
+ for (;;) {
+ walk(from);
+ if (from == to) { break }
+ from = from.nextSibling;
+ }
+ return text
+}
+
+function domToPos(cm, node, offset) {
+ var lineNode;
+ if (node == cm.display.lineDiv) {
+ lineNode = cm.display.lineDiv.childNodes[offset];
+ if (!lineNode) { return badPos(cm.clipPos(Pos(cm.display.viewTo - 1)), true) }
+ node = null; offset = 0;
+ } else {
+ for (lineNode = node;; lineNode = lineNode.parentNode) {
+ if (!lineNode || lineNode == cm.display.lineDiv) { return null }
+ if (lineNode.parentNode && lineNode.parentNode == cm.display.lineDiv) { break }
+ }
+ }
+ for (var i = 0; i < cm.display.view.length; i++) {
+ var lineView = cm.display.view[i];
+ if (lineView.node == lineNode)
+ { return locateNodeInLineView(lineView, node, offset) }
+ }
+}
+
+function locateNodeInLineView(lineView, node, offset) {
+ var wrapper = lineView.text.firstChild, bad = false;
+ if (!node || !contains(wrapper, node)) { return badPos(Pos(lineNo(lineView.line), 0), true) }
+ if (node == wrapper) {
+ bad = true;
+ node = wrapper.childNodes[offset];
+ offset = 0;
+ if (!node) {
+ var line = lineView.rest ? lst(lineView.rest) : lineView.line;
+ return badPos(Pos(lineNo(line), line.text.length), bad)
+ }
+ }
+
+ var textNode = node.nodeType == 3 ? node : null, topNode = node;
+ if (!textNode && node.childNodes.length == 1 && node.firstChild.nodeType == 3) {
+ textNode = node.firstChild;
+ if (offset) { offset = textNode.nodeValue.length; }
+ }
+ while (topNode.parentNode != wrapper) { topNode = topNode.parentNode; }
+ var measure = lineView.measure, maps = measure.maps;
+
+ function find(textNode, topNode, offset) {
+ for (var i = -1; i < (maps ? maps.length : 0); i++) {
+ var map$$1 = i < 0 ? measure.map : maps[i];
+ for (var j = 0; j < map$$1.length; j += 3) {
+ var curNode = map$$1[j + 2];
+ if (curNode == textNode || curNode == topNode) {
+ var line = lineNo(i < 0 ? lineView.line : lineView.rest[i]);
+ var ch = map$$1[j] + offset;
+ if (offset < 0 || curNode != textNode) { ch = map$$1[j + (offset ? 1 : 0)]; }
+ return Pos(line, ch)
+ }
+ }
+ }
+ }
+ var found = find(textNode, topNode, offset);
+ if (found) { return badPos(found, bad) }
+
+ // FIXME this is all really shaky. might handle the few cases it needs to handle, but likely to cause problems
+ for (var after = topNode.nextSibling, dist = textNode ? textNode.nodeValue.length - offset : 0; after; after = after.nextSibling) {
+ found = find(after, after.firstChild, 0);
+ if (found)
+ { return badPos(Pos(found.line, found.ch - dist), bad) }
+ else
+ { dist += after.textContent.length; }
+ }
+ for (var before = topNode.previousSibling, dist$1 = offset; before; before = before.previousSibling) {
+ found = find(before, before.firstChild, -1);
+ if (found)
+ { return badPos(Pos(found.line, found.ch + dist$1), bad) }
+ else
+ { dist$1 += before.textContent.length; }
+ }
+}
+
+// TEXTAREA INPUT STYLE
+
+var TextareaInput = function(cm) {
+ this.cm = cm;
+ // See input.poll and input.reset
+ this.prevInput = "";
+
+ // Flag that indicates whether we expect input to appear real soon
+ // now (after some event like 'keypress' or 'input') and are
+ // polling intensively.
+ this.pollingFast = false;
+ // Self-resetting timeout for the poller
+ this.polling = new Delayed();
+ // Used to work around IE issue with selection being forgotten when focus moves away from textarea
+ this.hasSelection = false;
+ this.composing = null;
+};
+
+TextareaInput.prototype.init = function (display) {
+ var this$1 = this;
+
+ var input = this, cm = this.cm;
+
+ // Wraps and hides input textarea
+ var div = this.wrapper = hiddenTextarea();
+ // The semihidden textarea that is focused when the editor is
+ // focused, and receives input.
+ var te = this.textarea = div.firstChild;
+ display.wrapper.insertBefore(div, display.wrapper.firstChild);
+
+ // Needed to hide big blue blinking cursor on Mobile Safari (doesn't seem to work in iOS 8 anymore)
+ if (ios) { te.style.width = "0px"; }
+
+ on(te, "input", function () {
+ if (ie && ie_version >= 9 && this$1.hasSelection) { this$1.hasSelection = null; }
+ input.poll();
+ });
+
+ on(te, "paste", function (e) {
+ if (signalDOMEvent(cm, e) || handlePaste(e, cm)) { return }
+
+ cm.state.pasteIncoming = true;
+ input.fastPoll();
+ });
+
+ function prepareCopyCut(e) {
+ if (signalDOMEvent(cm, e)) { return }
+ if (cm.somethingSelected()) {
+ setLastCopied({lineWise: false, text: cm.getSelections()});
+ } else if (!cm.options.lineWiseCopyCut) {
+ return
+ } else {
+ var ranges = copyableRanges(cm);
+ setLastCopied({lineWise: true, text: ranges.text});
+ if (e.type == "cut") {
+ cm.setSelections(ranges.ranges, null, sel_dontScroll);
+ } else {
+ input.prevInput = "";
+ te.value = ranges.text.join("\n");
+ selectInput(te);
+ }
+ }
+ if (e.type == "cut") { cm.state.cutIncoming = true; }
+ }
+ on(te, "cut", prepareCopyCut);
+ on(te, "copy", prepareCopyCut);
+
+ on(display.scroller, "paste", function (e) {
+ if (eventInWidget(display, e) || signalDOMEvent(cm, e)) { return }
+ cm.state.pasteIncoming = true;
+ input.focus();
+ });
+
+ // Prevent normal selection in the editor (we handle our own)
+ on(display.lineSpace, "selectstart", function (e) {
+ if (!eventInWidget(display, e)) { e_preventDefault(e); }
+ });
+
+ on(te, "compositionstart", function () {
+ var start = cm.getCursor("from");
+ if (input.composing) { input.composing.range.clear(); }
+ input.composing = {
+ start: start,
+ range: cm.markText(start, cm.getCursor("to"), {className: "CodeMirror-composing"})
+ };
+ });
+ on(te, "compositionend", function () {
+ if (input.composing) {
+ input.poll();
+ input.composing.range.clear();
+ input.composing = null;
+ }
+ });
+};
+
+TextareaInput.prototype.prepareSelection = function () {
+ // Redraw the selection and/or cursor
+ var cm = this.cm, display = cm.display, doc = cm.doc;
+ var result = prepareSelection(cm);
+
+ // Move the hidden textarea near the cursor to prevent scrolling artifacts
+ if (cm.options.moveInputWithCursor) {
+ var headPos = cursorCoords(cm, doc.sel.primary().head, "div");
+ var wrapOff = display.wrapper.getBoundingClientRect(), lineOff = display.lineDiv.getBoundingClientRect();
+ result.teTop = Math.max(0, Math.min(display.wrapper.clientHeight - 10,
+ headPos.top + lineOff.top - wrapOff.top));
+ result.teLeft = Math.max(0, Math.min(display.wrapper.clientWidth - 10,
+ headPos.left + lineOff.left - wrapOff.left));
+ }
+
+ return result
+};
+
+TextareaInput.prototype.showSelection = function (drawn) {
+ var cm = this.cm, display = cm.display;
+ removeChildrenAndAdd(display.cursorDiv, drawn.cursors);
+ removeChildrenAndAdd(display.selectionDiv, drawn.selection);
+ if (drawn.teTop != null) {
+ this.wrapper.style.top = drawn.teTop + "px";
+ this.wrapper.style.left = drawn.teLeft + "px";
+ }
+};
+
+// Reset the input to correspond to the selection (or to be empty,
+// when not typing and nothing is selected)
+TextareaInput.prototype.reset = function (typing) {
+ if (this.contextMenuPending || this.composing) { return }
+ var cm = this.cm;
+ if (cm.somethingSelected()) {
+ this.prevInput = "";
+ var content = cm.getSelection();
+ this.textarea.value = content;
+ if (cm.state.focused) { selectInput(this.textarea); }
+ if (ie && ie_version >= 9) { this.hasSelection = content; }
+ } else if (!typing) {
+ this.prevInput = this.textarea.value = "";
+ if (ie && ie_version >= 9) { this.hasSelection = null; }
+ }
+};
+
+TextareaInput.prototype.getField = function () { return this.textarea };
+
+TextareaInput.prototype.supportsTouch = function () { return false };
+
+TextareaInput.prototype.focus = function () {
+ if (this.cm.options.readOnly != "nocursor" && (!mobile || activeElt() != this.textarea)) {
+ try { this.textarea.focus(); }
+ catch (e) {} // IE8 will throw if the textarea is display: none or not in DOM
+ }
+};
+
+TextareaInput.prototype.blur = function () { this.textarea.blur(); };
+
+TextareaInput.prototype.resetPosition = function () {
+ this.wrapper.style.top = this.wrapper.style.left = 0;
+};
+
+TextareaInput.prototype.receivedFocus = function () { this.slowPoll(); };
+
+// Poll for input changes, using the normal rate of polling. This
+// runs as long as the editor is focused.
+TextareaInput.prototype.slowPoll = function () {
+ var this$1 = this;
+
+ if (this.pollingFast) { return }
+ this.polling.set(this.cm.options.pollInterval, function () {
+ this$1.poll();
+ if (this$1.cm.state.focused) { this$1.slowPoll(); }
+ });
+};
+
+// When an event has just come in that is likely to add or change
+// something in the input textarea, we poll faster, to ensure that
+// the change appears on the screen quickly.
+TextareaInput.prototype.fastPoll = function () {
+ var missed = false, input = this;
+ input.pollingFast = true;
+ function p() {
+ var changed = input.poll();
+ if (!changed && !missed) {missed = true; input.polling.set(60, p);}
+ else {input.pollingFast = false; input.slowPoll();}
+ }
+ input.polling.set(20, p);
+};
+
+// Read input from the textarea, and update the document to match.
+// When something is selected, it is present in the textarea, and
+// selected (unless it is huge, in which case a placeholder is
+// used). When nothing is selected, the cursor sits after previously
+// seen text (can be empty), which is stored in prevInput (we must
+// not reset the textarea when typing, because that breaks IME).
+TextareaInput.prototype.poll = function () {
+ var this$1 = this;
+
+ var cm = this.cm, input = this.textarea, prevInput = this.prevInput;
+ // Since this is called a *lot*, try to bail out as cheaply as
+ // possible when it is clear that nothing happened. hasSelection
+ // will be the case when there is a lot of text in the textarea,
+ // in which case reading its value would be expensive.
+ if (this.contextMenuPending || !cm.state.focused ||
+ (hasSelection(input) && !prevInput && !this.composing) ||
+ cm.isReadOnly() || cm.options.disableInput || cm.state.keySeq)
+ { return false }
+
+ var text = input.value;
+ // If nothing changed, bail.
+ if (text == prevInput && !cm.somethingSelected()) { return false }
+ // Work around nonsensical selection resetting in IE9/10, and
+ // inexplicable appearance of private area unicode characters on
+ // some key combos in Mac (#2689).
+ if (ie && ie_version >= 9 && this.hasSelection === text ||
+ mac && /[\uf700-\uf7ff]/.test(text)) {
+ cm.display.input.reset();
+ return false
+ }
+
+ if (cm.doc.sel == cm.display.selForContextMenu) {
+ var first = text.charCodeAt(0);
+ if (first == 0x200b && !prevInput) { prevInput = "\u200b"; }
+ if (first == 0x21da) { this.reset(); return this.cm.execCommand("undo") }
+ }
+ // Find the part of the input that is actually new
+ var same = 0, l = Math.min(prevInput.length, text.length);
+ while (same < l && prevInput.charCodeAt(same) == text.charCodeAt(same)) { ++same; }
+
+ runInOp(cm, function () {
+ applyTextInput(cm, text.slice(same), prevInput.length - same,
+ null, this$1.composing ? "*compose" : null);
+
+ // Don't leave long text in the textarea, since it makes further polling slow
+ if (text.length > 1000 || text.indexOf("\n") > -1) { input.value = this$1.prevInput = ""; }
+ else { this$1.prevInput = text; }
+
+ if (this$1.composing) {
+ this$1.composing.range.clear();
+ this$1.composing.range = cm.markText(this$1.composing.start, cm.getCursor("to"),
+ {className: "CodeMirror-composing"});
+ }
+ });
+ return true
+};
+
+TextareaInput.prototype.ensurePolled = function () {
+ if (this.pollingFast && this.poll()) { this.pollingFast = false; }
+};
+
+TextareaInput.prototype.onKeyPress = function () {
+ if (ie && ie_version >= 9) { this.hasSelection = null; }
+ this.fastPoll();
+};
+
+TextareaInput.prototype.onContextMenu = function (e) {
+ var input = this, cm = input.cm, display = cm.display, te = input.textarea;
+ var pos = posFromMouse(cm, e), scrollPos = display.scroller.scrollTop;
+ if (!pos || presto) { return } // Opera is difficult.
+
+ // Reset the current text selection only if the click is done outside of the selection
+ // and 'resetSelectionOnContextMenu' option is true.
+ var reset = cm.options.resetSelectionOnContextMenu;
+ if (reset && cm.doc.sel.contains(pos) == -1)
+ { operation(cm, setSelection)(cm.doc, simpleSelection(pos), sel_dontScroll); }
+
+ var oldCSS = te.style.cssText, oldWrapperCSS = input.wrapper.style.cssText;
+ input.wrapper.style.cssText = "position: absolute";
+ var wrapperBox = input.wrapper.getBoundingClientRect();
+ te.style.cssText = "position: absolute; width: 30px; height: 30px;\n top: " + (e.clientY - wrapperBox.top - 5) + "px; left: " + (e.clientX - wrapperBox.left - 5) + "px;\n z-index: 1000; background: " + (ie ? "rgba(255, 255, 255, .05)" : "transparent") + ";\n outline: none; border-width: 0; outline: none; overflow: hidden; opacity: .05; filter: alpha(opacity=5);";
+ var oldScrollY;
+ if (webkit) { oldScrollY = window.scrollY; } // Work around Chrome issue (#2712)
+ display.input.focus();
+ if (webkit) { window.scrollTo(null, oldScrollY); }
+ display.input.reset();
+ // Adds "Select all" to context menu in FF
+ if (!cm.somethingSelected()) { te.value = input.prevInput = " "; }
+ input.contextMenuPending = true;
+ display.selForContextMenu = cm.doc.sel;
+ clearTimeout(display.detectingSelectAll);
+
+ // Select-all will be greyed out if there's nothing to select, so
+ // this adds a zero-width space so that we can later check whether
+ // it got selected.
+ function prepareSelectAllHack() {
+ if (te.selectionStart != null) {
+ var selected = cm.somethingSelected();
+ var extval = "\u200b" + (selected ? te.value : "");
+ te.value = "\u21da"; // Used to catch context-menu undo
+ te.value = extval;
+ input.prevInput = selected ? "" : "\u200b";
+ te.selectionStart = 1; te.selectionEnd = extval.length;
+ // Re-set this, in case some other handler touched the
+ // selection in the meantime.
+ display.selForContextMenu = cm.doc.sel;
+ }
+ }
+ function rehide() {
+ input.contextMenuPending = false;
+ input.wrapper.style.cssText = oldWrapperCSS;
+ te.style.cssText = oldCSS;
+ if (ie && ie_version < 9) { display.scrollbars.setScrollTop(display.scroller.scrollTop = scrollPos); }
+
+ // Try to detect the user choosing select-all
+ if (te.selectionStart != null) {
+ if (!ie || (ie && ie_version < 9)) { prepareSelectAllHack(); }
+ var i = 0, poll = function () {
+ if (display.selForContextMenu == cm.doc.sel && te.selectionStart == 0 &&
+ te.selectionEnd > 0 && input.prevInput == "\u200b") {
+ operation(cm, selectAll)(cm);
+ } else if (i++ < 10) {
+ display.detectingSelectAll = setTimeout(poll, 500);
+ } else {
+ display.selForContextMenu = null;
+ display.input.reset();
+ }
+ };
+ display.detectingSelectAll = setTimeout(poll, 200);
+ }
+ }
+
+ if (ie && ie_version >= 9) { prepareSelectAllHack(); }
+ if (captureRightClick) {
+ e_stop(e);
+ var mouseup = function () {
+ off(window, "mouseup", mouseup);
+ setTimeout(rehide, 20);
+ };
+ on(window, "mouseup", mouseup);
+ } else {
+ setTimeout(rehide, 50);
+ }
+};
+
+TextareaInput.prototype.readOnlyChanged = function (val) {
+ if (!val) { this.reset(); }
+ this.textarea.disabled = val == "nocursor";
+};
+
+TextareaInput.prototype.setUneditable = function () {};
+
+TextareaInput.prototype.needsContentAttribute = false;
+
+function fromTextArea(textarea, options) {
+ options = options ? copyObj(options) : {};
+ options.value = textarea.value;
+ if (!options.tabindex && textarea.tabIndex)
+ { options.tabindex = textarea.tabIndex; }
+ if (!options.placeholder && textarea.placeholder)
+ { options.placeholder = textarea.placeholder; }
+ // Set autofocus to true if this textarea is focused, or if it has
+ // autofocus and no other element is focused.
+ if (options.autofocus == null) {
+ var hasFocus = activeElt();
+ options.autofocus = hasFocus == textarea ||
+ textarea.getAttribute("autofocus") != null && hasFocus == document.body;
+ }
+
+ function save() {textarea.value = cm.getValue();}
+
+ var realSubmit;
+ if (textarea.form) {
+ on(textarea.form, "submit", save);
+ // Deplorable hack to make the submit method do the right thing.
+ if (!options.leaveSubmitMethodAlone) {
+ var form = textarea.form;
+ realSubmit = form.submit;
+ try {
+ var wrappedSubmit = form.submit = function () {
+ save();
+ form.submit = realSubmit;
+ form.submit();
+ form.submit = wrappedSubmit;
+ };
+ } catch(e) {}
+ }
+ }
+
+ options.finishInit = function (cm) {
+ cm.save = save;
+ cm.getTextArea = function () { return textarea; };
+ cm.toTextArea = function () {
+ cm.toTextArea = isNaN; // Prevent this from being ran twice
+ save();
+ textarea.parentNode.removeChild(cm.getWrapperElement());
+ textarea.style.display = "";
+ if (textarea.form) {
+ off(textarea.form, "submit", save);
+ if (typeof textarea.form.submit == "function")
+ { textarea.form.submit = realSubmit; }
+ }
+ };
+ };
+
+ textarea.style.display = "none";
+ var cm = CodeMirror$1(function (node) { return textarea.parentNode.insertBefore(node, textarea.nextSibling); },
+ options);
+ return cm
+}
+
+function addLegacyProps(CodeMirror) {
+ CodeMirror.off = off;
+ CodeMirror.on = on;
+ CodeMirror.wheelEventPixels = wheelEventPixels;
+ CodeMirror.Doc = Doc;
+ CodeMirror.splitLines = splitLinesAuto;
+ CodeMirror.countColumn = countColumn;
+ CodeMirror.findColumn = findColumn;
+ CodeMirror.isWordChar = isWordCharBasic;
+ CodeMirror.Pass = Pass;
+ CodeMirror.signal = signal;
+ CodeMirror.Line = Line;
+ CodeMirror.changeEnd = changeEnd;
+ CodeMirror.scrollbarModel = scrollbarModel;
+ CodeMirror.Pos = Pos;
+ CodeMirror.cmpPos = cmp;
+ CodeMirror.modes = modes;
+ CodeMirror.mimeModes = mimeModes;
+ CodeMirror.resolveMode = resolveMode;
+ CodeMirror.getMode = getMode;
+ CodeMirror.modeExtensions = modeExtensions;
+ CodeMirror.extendMode = extendMode;
+ CodeMirror.copyState = copyState;
+ CodeMirror.startState = startState;
+ CodeMirror.innerMode = innerMode;
+ CodeMirror.commands = commands;
+ CodeMirror.keyMap = keyMap;
+ CodeMirror.keyName = keyName;
+ CodeMirror.isModifierKey = isModifierKey;
+ CodeMirror.lookupKey = lookupKey;
+ CodeMirror.normalizeKeyMap = normalizeKeyMap;
+ CodeMirror.StringStream = StringStream;
+ CodeMirror.SharedTextMarker = SharedTextMarker;
+ CodeMirror.TextMarker = TextMarker;
+ CodeMirror.LineWidget = LineWidget;
+ CodeMirror.e_preventDefault = e_preventDefault;
+ CodeMirror.e_stopPropagation = e_stopPropagation;
+ CodeMirror.e_stop = e_stop;
+ CodeMirror.addClass = addClass;
+ CodeMirror.contains = contains;
+ CodeMirror.rmClass = rmClass;
+ CodeMirror.keyNames = keyNames;
+}
+
+// EDITOR CONSTRUCTOR
+
+defineOptions(CodeMirror$1);
+
+addEditorMethods(CodeMirror$1);
+
+// Set up methods on CodeMirror's prototype to redirect to the editor's document.
+var dontDelegate = "iter insert remove copy getEditor constructor".split(" ");
+for (var prop in Doc.prototype) { if (Doc.prototype.hasOwnProperty(prop) && indexOf(dontDelegate, prop) < 0)
+ { CodeMirror$1.prototype[prop] = (function(method) {
+ return function() {return method.apply(this.doc, arguments)}
+ })(Doc.prototype[prop]); } }
+
+eventMixin(Doc);
+
+// INPUT HANDLING
+
+CodeMirror$1.inputStyles = {"textarea": TextareaInput, "contenteditable": ContentEditableInput};
+
+// MODE DEFINITION AND QUERYING
+
+// Extra arguments are stored as the mode's dependencies, which is
+// used by (legacy) mechanisms like loadmode.js to automatically
+// load a mode. (Preferred mechanism is the require/define calls.)
+CodeMirror$1.defineMode = function(name/*, mode, …*/) {
+ if (!CodeMirror$1.defaults.mode && name != "null") { CodeMirror$1.defaults.mode = name; }
+ defineMode.apply(this, arguments);
+};
+
+CodeMirror$1.defineMIME = defineMIME;
+
+// Minimal default mode.
+CodeMirror$1.defineMode("null", function () { return ({token: function (stream) { return stream.skipToEnd(); }}); });
+CodeMirror$1.defineMIME("text/plain", "null");
+
+// EXTENSIONS
+
+CodeMirror$1.defineExtension = function (name, func) {
+ CodeMirror$1.prototype[name] = func;
+};
+CodeMirror$1.defineDocExtension = function (name, func) {
+ Doc.prototype[name] = func;
+};
+
+CodeMirror$1.fromTextArea = fromTextArea;
+
+addLegacyProps(CodeMirror$1);
+
+CodeMirror$1.version = "5.32.0";
+
+return CodeMirror$1;
+
+})));
diff --git a/app/www/static/js/index.js b/app/www/static/js/index.js
new file mode 100644
index 0000000..015c8be
--- /dev/null
+++ b/app/www/static/js/index.js
@@ -0,0 +1,46 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements. See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership. The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License. You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied. See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+var app = {
+ // Application Constructor
+ initialize: function() {
+ document.addEventListener('deviceready', this.onDeviceReady.bind(this), false);
+ document.addEventListener('resume', this.onDeviceResume.bind(this), false);
+ document.addEventListener('DOMContentLoaded', event => {
+ if (typeof cordova === 'undefined') {
+ init();
+ web.init();
+ getState();
+ }
+ })
+ },
+
+ // deviceready Event Handler
+ //
+ // Bind any cordova events here. Common events are:
+ // 'pause', 'resume', etc.
+ onDeviceReady: function() {
+ init();
+ mobile.init();
+ },
+ onDeviceResume : function () {
+ getState();
+ }
+};
+
+app.initialize();
\ No newline at end of file
diff --git a/app/www/static/js/intval.core.js b/app/www/static/js/intval.core.js
new file mode 100644
index 0000000..a66d864
--- /dev/null
+++ b/app/www/static/js/intval.core.js
@@ -0,0 +1,318 @@
+'use strict';
+const BOLEX = {
+ angle : 133,
+ prism : 0.8,
+ iso : 100,
+ fstop : 5.6,
+ expected : 630
+};
+const STATE = {
+ dir : true,
+ exposure : 630, //always ms
+ delay : 0,
+ scale : 'ms',
+ delayScale : 'ms',
+ counter : 0,
+ sequence : false
+};
+
+//functions
+window.frame = null;
+window.getState = null;
+window.setDir = null;
+window.setExposure = null;
+window.setDelay = null;
+window.setCounter = null;
+window.sequence = null;
+window.reset = null;
+window.restart = null;
+window.update = null;
+
+//ms
+var shutter = function (exposure) {
+ let fraction = BOLEX.expected / 1000;
+ let speed;
+ let corrected;
+ let str;
+ if (exposure > BOLEX.expected) {
+ //if exposure is explicitly set
+ fraction = exposure / 1000;
+ speed = fraction;
+ } else {
+ speed = fraction * (BOLEX.angle / 360);
+ }
+ corrected = speed * BOLEX.prism;
+ if (corrected < 1.0) {
+ //less than a second
+ str = '1/' + Math.round(Math.pow(corrected, -1)) + ' sec';
+ } else if (corrected >= 1.0 && corrected < 60) {
+ //greater than a second, less than a minute
+ str = '' + (Math.round(corrected * 10) / 10) + ' sec'
+ } else if (corrected >= 60 && corrected < 60 * 60) {
+ //greater than a minute, less than an hour
+ str = '' + (Math.round(corrected / 6) / 10) + ' min';
+ } else if (corrected >= 60 * 60 && corrected < 60 * 60 * 24) {
+ //greater than an hour, less than a day
+ str = '' + (Math.round(corrected / (6 * 60)) / 10) + ' hr';
+ } else if (corrected >= 60 * 60 * 24) {
+ //greater than a day
+ str = '' + (Math.round(corrected / (6 * 60 * 24)) / 10) + ' day';
+ }
+ return { speed : speed, str : str }
+};
+
+var scaleAuto = function (ms) {
+ if (ms < 1000) {
+ return 'ms'
+ } else if (ms >= 1000 && ms < 1000 * 60) {
+ return 'sec'
+ } else if (ms >= 1000 * 60 && ms < 1000 * 60 * 60) {
+ return 'min'
+ } else if (ms >= 1000 * 60 * 60) {
+ return 'hour'
+ }
+};
+
+var scaleTime = function (raw, scale) {
+ if (scale === 'ms') {
+ return raw
+ } else if (scale === 'sec') {
+ return raw * 1000;
+ } else if (scale === 'min') {
+ return raw * (1000 * 60);
+ } else if (scale === 'hour') {
+ return raw * (1000 * 60 * 60);
+ }
+};
+
+var setExposureScale = function () {
+ const scale = document.getElementById('scale').value;
+ const elem = document.getElementById('exposure');
+ if (scale === 'ms') {
+ elem.value = STATE.exposure;
+ } else if (scale === 'sec') {
+ elem.value = STATE.exposure / 1000;
+ } else if (scale === 'min') {
+ elem.value = STATE.exposure / (1000 * 60);
+ } else if (scale === 'hour') {
+ elem.value = STATE.exposure / (1000 * 60 * 60);
+ }
+ STATE.scale = scale;
+};
+
+var setDelayScale = function () {
+ const scale = document.getElementById('delayScale').value;
+ const elem = document.getElementById('delay');
+ if (scale === 'ms') {
+ elem.value = STATE.delay;
+ } else if (scale === 'sec') {
+ elem.value = STATE.delay / 1000;
+ } else if (scale === 'min') {
+ elem.value = STATE.delay / (1000 * 60);
+ } else if (scale === 'hour') {
+ elem.value = STATE.delay / (1000 * 60 * 60);
+ }
+ STATE.delayScale = scale;
+};
+
+var setDirLabel = function (dir) {
+ const bwdLabel = document.getElementById('bwdLabel');
+ const fwdLabel = document.getElementById('fwdLabel');
+ const but = document.getElementById('frame');
+ if (dir) {
+ bwdLabel.classList.remove('selected');
+ fwdLabel.classList.add('selected');
+ but.innerHTML = '+1 FRAME';
+ } else {
+ fwdLabel.classList.remove('selected');
+ bwdLabel.classList.add('selected');
+ but.innerHTML = '-1 FRAME';
+ }
+};
+var incCounter = function (val) {
+ const elem = document.getElementById('counter');
+ const current = elem.value;
+ elem.value = (parseInt(current) + val);
+ STATE.counter += val;
+};
+var forceCounter = function (val) {
+ document.getElementById('counter').value = val;
+}
+var unsetPages = function () {
+ const pages = document.querySelectorAll('.page');
+ const icons = document.querySelectorAll('.icon');
+ for (let icon of icons) {
+ if (icon.classList.contains('selected')) icon.classList.remove('selected');
+ };
+ for (let page of pages){;
+ if (page.classList.contains('selected')) page.classList.remove('selected');
+ }
+
+};
+
+var setState = function (res) {
+ let exposure;
+ let exposureScale;
+ let delayScale;
+
+ if (res.frame.dir !== true) {
+ document.getElementById('dir').checked = true;
+ STATE.dir = res.frame.dir;
+ setDirLabel(false);
+ } else {
+ document.getElementById('dir').checked = false;
+ STATE.dir = res.frame.dir;
+ setDirLabel(true);
+ }
+ document.getElementById('counter').value = res.counter;
+ STATE.counter = res.counter;
+ //Exposure
+ if (res.frame.exposure === 0) {
+ res.frame.exposure = BOLEX.expected;
+ }
+ STATE.exposure = res.frame.exposure;
+ exposure = shutter(STATE.exposure);
+ exposureScale = scaleAuto(STATE.exposure);
+
+ document.getElementById('str').innerHTML = exposure.str;
+ document.getElementById('scale').value = exposureScale;
+ setExposureScale();
+
+ STATE.delay = res.frame.delay;
+ delayScale = scaleAuto(STATE.delay);
+ document.getElementById('delayScale').value = delayScale;
+ setDelayScale();
+
+ if (res.sequence == true) {
+ STATE.sequence = true;
+ if (mobile.ble) mobile.ble.active = true;
+ seqState(true);
+ } else {
+ seqState(false);
+ }
+};
+
+var seqState = function (state) {
+ const elem = document.getElementById('seq')
+ if (state) {
+ if (!elem.classList.contains('focus')) {
+ elem.classList.add('focus');
+ elem.innerHTML = 'STOP SEQUENCE';
+ }
+ } else {
+ if (elem.classList.contains('focus')) {
+ elem.classList.remove('focus');
+ elem.innerHTML = 'START SEQUENCE';
+ }
+ }
+};
+
+var appPage = function () {
+ unsetPages();
+ document.getElementById('app').classList.add('selected');
+ document.getElementById('appIcon').classList.add('selected');
+};
+var settingsPage = function () {
+ unsetPages();
+ document.getElementById('settings').classList.add('selected');
+ document.getElementById('settingsIcon').classList.add('selected');
+};
+var mscriptPage = function () {
+ unsetPages();
+ document.getElementById('mscript').classList.add('selected');
+ document.getElementById('mscriptIcon').classList.add('selected');
+ editor.cm.refresh();
+};
+var cameraPage = function () {
+ unsetPages();
+ document.getElementById('camera').classList.add('selected');
+ document.getElementById('cameraIcon').classList.add('selected');
+};
+
+var isNumeric = function (n) {
+ return !isNaN(parseFloat(n)) && isFinite(n);
+};
+
+var UI = {};
+
+UI.overlay = {
+ elem : document.getElementById('overlay')
+}
+UI.overlay.show = function () {
+ if (!UI.overlay.elem.classList.contains('active')) {
+ UI.overlay.elem.classList.add('active');
+ }
+};
+UI.overlay.hide = function () {
+ if (UI.overlay.elem.classList.contains('active')) {
+ UI.overlay.elem.classList.remove('active');
+ }
+};
+UI.spinner = {
+ elem : document.getElementById('spinner')
+}
+UI.spinner.opts = {
+ lines: 13 // The number of lines to draw
+ , length: 33 // The length of each line
+ , width: 11 // The line thickness
+ , radius: 30 // The radius of the inner circle
+ , scale: 0.5 // Scales overall size of the spinner
+ , corners: 1 // Corner roundness (0..1)
+ , color: '#fff' // #rgb or #rrggbb or array of colors
+ , opacity: 0.25 // Opacity of the lines
+ , rotate: 0 // The rotation offset
+ , direction: 1 // 1: clockwise, -1: counterclockwise
+ , speed: 1 // Rounds per second
+ , trail: 60 // Afterglow percentage
+ , fps: 20 // Frames per second when using setTimeout() as a fallback for CSS
+ , zIndex: 2e9 // The z-index (defaults to 2000000000)
+ , className: 'spinner' // The CSS class to assign to the spinner
+ , top: '50%' // Top position relative to parent
+ , left: '50%' // Left position relative to parent
+ , shadow: true // Whether to render a shadow
+ , hwaccel: true // Whether to use hardware acceleration
+ , position: 'relative' // Element positioning
+};
+UI.spinner.init = function () {
+ const spinner = new Spinner(UI.spinner.opts).spin(UI.spinner.elem);
+};
+UI.spinner.show = function (text) {
+ if (!UI.spinner.elem.classList.contains('active')) {
+ UI.spinner.elem.classList.add('active');
+ }
+ if (text) {
+ UI.message.show(text)
+ }
+};
+UI.spinner.hide = function () {
+ if (UI.spinner.elem.classList.contains('active')) {
+ UI.spinner.elem.classList.remove('active');
+ }
+
+};
+UI.message = {
+ elem : document.getElementById('msg')
+};
+UI.message.show = function (text) {
+ UI.message.elem.innerHTML = text
+ if (!UI.message.elem.classList.contains('active')) {
+ UI.message.elem.classList.add('active');
+ }
+};
+UI.message.hide = function () {
+ if (UI.message.elem.classList.contains('active')) {
+ UI.message.elem.classList.remove('active');
+ }
+};
+
+var init = function () {
+ document.querySelector('.angle').oninput = function () {
+ BOLEX.angle = parseInt(this.value);
+ };
+ document.querySelector('.iso').oninput = function () {
+ BOLEX.iso = parseInt(this.value);
+ };
+ document.querySelector('.fstop').oninput = function () {
+ BOLEX.fstop = parseFloat(this.value);
+ };
+};
\ No newline at end of file
diff --git a/app/www/static/js/intval.mobile.js b/app/www/static/js/intval.mobile.js
new file mode 100644
index 0000000..760d878
--- /dev/null
+++ b/app/www/static/js/intval.mobile.js
@@ -0,0 +1,781 @@
+/* jshint esversion:6, strict:true, browser:true*/
+/* global console, alert */
+
+
+'use strict';
+var mobile = {};
+
+mobile.ble = {
+ BLENO_DEVICE_NAME : 'intval3',
+ DEVICE_ID : 'intval3',
+ SERVICE_ID : '149582bd-d49d-4b5c-acd1-1ae503d09e7a',
+ CHAR_ID : '47bf69fb-f62f-4ef8-9be8-eb727a54fae4', //general data
+ WIFI_ID : '3fe7d9cf-7bd2-4ff0-97c5-ebe87288c2cc', //wifi only
+ devices : [],
+ device : {},
+ connected : false,
+ active : false
+};
+
+mobile.wifi = {
+ current : 'null',
+ available : [],
+ ip : null
+};
+
+mobile.ble.scan = function () {
+ UI.spinner.show('Scanning for INTVAL3...');
+ UI.overlay.show();
+ ble.scan([], 5, mobile.ble.onDiscover, mobile.ble.onError);
+ mobile.ble.devices = [];
+ setTimeout(() => {
+ UI.spinner.hide();
+ UI.overlay.hide();
+ if (!mobile.ble.connected) {
+ mobile.alert('No devices found.')
+ settingsPage();
+ }
+ }, 5000);
+};
+
+mobile.ble.onDiscover = function (device) {
+ if (device && device.name && device.name.indexOf('intval3') !== -1) {
+ console.log('BLE - Discovered INTVAL3');
+ console.dir(device);
+ mobile.ble.devices.push(device);
+ if (!mobile.ble.connected) {
+ mobile.ble.connect(device);
+ }
+ } else {
+ //console.log(`BLE - Discovered Other ${device.id}`);
+ }
+};
+
+mobile.ble.connect = function (device) {
+ console.log(`BLE - Connecting to ${device.id}`);
+ ble.connect(device.id, (peripheral) => {
+ mobile.ble.onConnect(peripheral, device);
+ }, mobile.ble.onError);
+};
+
+mobile.ble.onConnect = function (peripheral, device) {
+ const elem = document.getElementById('bluetooth');
+ const option = document.createElement('option');
+ const disconnect = document.getElementById('disconnect');
+ const scan = document.getElementById('scan');
+
+ UI.spinner.hide();
+ UI.overlay.hide();
+ console.log(`BLE - Connected to ${device.id}`);
+ console.log(peripheral);
+ console.dir(device);
+
+ mobile.ble.device = device;
+ mobile.ble.connected = true;
+
+ elem.innerHTML = '';
+ option.text = device.name;
+ option.value = device.id;
+ elem.add(option);
+
+ disconnect.classList.add('active');
+ scan.classList.remove('active');
+
+ getState();
+ mobile.getWifi();
+};
+
+mobile.ble.disconnect = function () {
+ const elem = document.getElementById('bluetooth');
+ const option = document.createElement('option');
+ const disconnect = document.getElementById('disconnect');
+ const scan = document.getElementById('scan');
+ let device;
+ if (!mobile.ble.connected) {
+ console.warn('Not connected to any device');
+ return false;
+ }
+ device = mobile.ble.device;
+ console.log(`BLE - Disconnecting from ${device.id}`);
+ ble.disconnect(device.id, mobile.ble.onDisconnect, mobile.ble.onDisconnect);
+
+ elem.innerHTML = '';
+ option.text = 'N/A';
+ elem.add(option);
+
+ disconnect.classList.remove('active');
+ scan.classList.add('active');
+ UI.spinner.hide();
+ UI.overlay.hide();
+};
+
+mobile.ble.onDisconnect = function (res) {
+ console.log(`BLE - Disconnected from ${res}`);
+ mobile.ble.connected = false;
+ mobile.ble.device = {};
+};
+
+mobile.ble.onError = function (err) {
+ if (err.errorMessage && err.errorMessage === 'Peripheral Disconnected') {
+ console.log('Device disconnected');
+ mobile.ble.disconnect()
+ } else {
+ mobile.alert(JSON.stringify(err));
+ }
+ /*
+ Object
+ errorDescription: "The specified device has disconnected from us."
+ errorMessage: "Peripheral Disconnected"
+ id: "E8EF4B8B-0B5E-4E96-B337-E878DB1E3C4B"
+ name: "intval3_b827ebc7461d"
+ */
+};
+
+mobile.init = function () {
+ const bleInputs = document.querySelectorAll('.ble');
+ const bolIso = document.querySelector('.iso');
+ const bolF = document.querySelector('.fstop');
+
+ document.querySelector('body').classList.add('mobile');
+
+ window.frame = mobile.frame;
+ window.getState = mobile.getState;
+ window.setDir = mobile.setDir;
+ window.setExposure = mobile.setExposure;
+ window.setDelay = mobile.setDelay;
+ window.setCounter = mobile.setCounter;
+ window.sequence = mobile.sequence;
+ window.reset = mobile.reset;
+ window.restart = mobile.restart;
+ window.update = mobile.update;
+
+ //show ble-specific fields in settings
+ for (let i of bleInputs) {
+ i.classList.add('active');
+ }
+ UI.spinner.init()
+ mobile.ble.scan();
+ mobile.cameraValues();
+
+};
+
+mobile.getState = function () {
+ if (!mobile.ble.connected) {
+ //returning here will prevent error alert
+ }
+ ble.read(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ mobile.stateSuccess,
+ mobile.ble.onError);
+};
+mobile.stateSuccess = function (data) {
+ let str = bytesToString(data);
+ let res = JSON.parse(str);
+ setState(res);
+};
+
+mobile.frame = function () {
+ const opts = {
+ type : 'frame'
+ };
+ if (!mobile.ble.connected) {
+ return mobile.alert('Not connected to an INTVAL3 device.');
+ }
+ if (mobile.ble.active) {
+ return false;
+ }
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)), //check length?
+ mobile.frameSuccess,
+ mobile.ble.onError);
+ document.getElementById('frame').classList.add('focus');
+ mobile.ble.active = true;
+};
+
+
+mobile.frameSuccess = function () {
+ if (STATE.exposure < 5000) {
+ console.log('Frame finished, getting state.');
+ mobile.ble.active = false;
+ document.getElementById('frame').classList.remove('focus');
+ mobile.getState();
+ } else {
+ setTimeout(() => {
+ console.log('Frame finished, getting state.');
+ mobile.ble.active = false;
+ document.getElementById('frame').classList.remove('focus');
+ mobile.getState();
+ }, STATE.exposure + 500)
+ }
+}
+mobile.setDir = function () {
+ const opts = {
+ type : 'dir',
+ dir : !document.getElementById('dir').checked
+ };
+
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)), //check length?
+ mobile.dirSuccess,
+ mobile.ble.onError);
+};
+mobile.dirSuccess = function () {
+ console.log('Set direction');
+ mobile.getState();
+ setTimeout(() => {
+ setDirLabel(STATE.dir);
+ }, 50);
+};
+mobile.setExposure = function () {
+ let exposure = document.getElementById('exposure').value;
+ let scaledExposure;
+ let opts = {
+ type : 'exposure'
+ };
+ if (exposure === '' || exposure === null) {
+ exposure = 0;
+ }
+ scaledExposure = scaleTime(exposure, STATE.scale);
+ opts.exposure = scaledExposure;
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)), //check length?
+ mobile.exposureSuccess,
+ mobile.ble.onError);
+};
+mobile.exposureSuccess = function () {
+ console.log('Set exposure');
+ mobile.getState();
+};
+
+mobile.setDelay = function () {
+ const delay = document.getElementById('delay').value;
+ const scaledDelay = scaleTime(delay, STATE.delayScale);
+ let opts = {
+ type : 'delay',
+ delay : scaledDelay
+ };
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)), //check length?
+ mobile.delaySuccess,
+ mobile.ble.onError);
+}
+
+mobile.delaySuccess = function () {
+ console.log('Set delay');
+ mobile.getState();
+};
+
+mobile.setCounter = function () {
+ let opts = {
+ type : 'counter',
+ counter : null
+ };
+ const counter = document.getElementById('counter').value;
+ function counterPrompt (results) {
+ let change = results.input1
+ if (results.buttonIndex === 1) {
+ if (change === null || !isNumeric(change)) return false;
+ opts.counter = change;
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)), //check length?
+ mobile.counterSuccess,
+ mobile.ble.onError);
+ }
+ }
+ navigator.notification.prompt(
+ `Change counter value?`,
+ counterPrompt,
+ 'INTVAL3',
+ ['Okay', 'Cancel'],
+ counter);
+};
+
+mobile.counterSuccess = function () {
+ console.log('Set counter');
+ mobile.getState();
+};
+
+mobile.sequence = function () {
+ const opts = {
+ type : 'sequence'
+ };
+ const elem = document.getElementById('seq');
+ if (!mobile.ble.connected) {
+ return mobile.alert('Not connected to an INTVAL3 device.');
+ }
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)), //check length?
+ mobile.sequenceSuccess,
+ mobile.ble.onError);
+
+ if (!elem.classList.contains('focus')) {
+ elem.classList.add('focus');
+ }
+
+ mobile.ble.active = true;
+};
+
+mobile.sequenceSuccess = function () {
+ console.log('Sequence state changed');
+ mobile.getState();
+ setTimeout(() => {
+ if (STATE.sequence) {
+ mobile.ble.active = true;
+ seqState(true);
+ } else {
+ mobile.ble.active = false;
+ seqState(false);
+ }
+ }, 20);
+};
+
+
+//retreive object with list of available Wifi APs,
+//and state of current connection, if available
+mobile.getWifi = function () {
+ UI.spinner.show('Refreshing WIFI...');
+ UI.overlay.show();
+
+ ble.read(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.WIFI_ID,
+ mobile.getWifiSuccess,
+ mobile.ble.onError);
+};
+
+mobile.getWifiSuccess = function (data) {
+ const elem = document.getElementById('available');
+ const wifi = document.getElementById('wifi');
+ const password = document.getElementById('password');
+ const ip = document.getElementById('ip');
+ let option = document.createElement('option');
+ let str = bytesToString(data);
+ let res = JSON.parse(str);
+
+ UI.spinner.hide();
+ UI.overlay.hide();
+ elem.innerHTML = ''
+ if (!res.available || res.available.length === 0) {
+ if (elem.classList.contains('active')) {
+ elem.classList.remove('active');
+ }
+ option.text = 'N/A'
+ elem.add(option);
+ elem.value = '';
+ } else {
+ for (let ap of res.available) {
+ option = document.createElement('option');
+ option.text = ap;
+ option.value = ap;
+ elem.add(option);
+ }
+ if (res.current && res.available.indexOf(res.current) !== -1) {
+ elem.value = res.current
+ if (!elem.classList.contains('active')) {
+ elem.classList.add('active');
+ }
+ if (wifi.classList.contains('active')) {
+ wifi.classList.remove('active');
+ }
+ if (password.classList.contains('active')) {
+ password.classList.remove('active');
+ }
+ } else {
+ if (!wifi.classList.contains('active')) {
+ wifi.classList.add('active');
+ }
+ if (!password.classList.contains('active')) {
+ password.classList.add('active');
+ }
+ }
+ }
+ if (typeof res.ip !== 'undefined' && res.ip != null ) {
+ ip.innerHTML = `Local IP: ${res.ip}`
+ if (!ip.classList.contains('active')) {
+ ip.classList.add('active');
+ }
+ } else {
+ ip.innerHTML = 'Local IP: null'
+ if (ip.classList.contains('active')) {
+ ip.classList.remove('active');
+ }
+ }
+ mobile.wifi.current = res.current;
+ mobile.wifi.available = res.available;
+ mobile.wifi.ip = res.ip;
+};
+
+mobile.editWifi = function () {
+ const available = document.getElementById('available');
+ const wifi = document.getElementById('wifi');
+ const password = document.getElementById('password');
+ if (!wifi.classList.contains('active')) {
+ wifi.classList.add('active');
+ }
+ if (!password.classList.contains('active')) {
+ password.classList.add('active');
+ }
+ password.focus();
+ if (available.value !== mobile.wifi.current && available.classList.contains('active')) {
+ available.classList.remove('active');
+ }
+};
+
+mobile.setWifi = function () {
+ const ssid = document.getElementById('available').value;
+ const pwd = document.getElementById('password').value;
+ const opts = {
+ ssid : ssid,
+ pwd : pwd
+ };
+ UI.spinner.show('Setting WIFI...');
+ UI.overlay.show();
+
+ if (ssid === '' || ssid === null || ssid === undefined) {
+ return mobile.alert('Cannot set wireless credentials with a blank SSID');
+ }
+ if (pwd === '' || pwd === null || pwd === undefined) {
+ return mobile.alert('Cannot set wireless credentials with a blank passphrase');
+ }
+ if (pwd.length < 8 || pwd.length > 63) {
+ return mobile.alert('Passphrase must be 8..63 characters');
+ }
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.WIFI_ID,
+ stringToBytes(JSON.stringify(opts)),
+ mobile.setWifiSuccess,
+ mobile.ble.onError);
+};
+
+mobile.setWifiSuccess = function () {
+ UI.spinner.hide();
+ UI.overlay.hide();
+ console.log('Set new wifi credentials');
+ setTimeout(mobile.getWifi, 100);
+};
+mobile.exif = {}
+
+mobile.getCamera = function () {
+ const opts = {
+ quality: 30,
+ sourceType: Camera.PictureSourceType.CAMERA,
+ destinationType: Camera.DestinationType.FILE_URI
+ };
+ navigator.camera.getPicture(mobile.cameraSuccess, mobile.cameraError, opts);
+};
+mobile.cameraSuccess = function (result) {
+ const thisResult = JSON.parse(result);
+ const metadata = JSON.parse(thisResult.json_metadata);
+
+ mobile.cameraExposure(metadata.Exif);
+};
+mobile.cameraError = function (err) {
+ console.error(err);
+ mobile.alert(JSON.stringify(err));
+};
+
+mobile.cameraExposure = function (exif) {
+ const cam_exp = document.getElementById('cam_exp');
+ const cam_f = document.getElementById('cam_f');
+ const cam_iso = document.getElementById('cam_iso');
+ const bol_exp = document.getElementById('bol_exp');
+ const bol_f = document.getElementById('bol_f');
+ const bol_iso = document.getElementById('bol_iso');
+ const bol_f_diff = document.getElementById('bol_f_diff');
+ const bol_iso_diff = document.getElementById('bol_iso_diff');
+ const bol_exp_diff = document.getElementById('bol_exp_diff');
+
+ const fstop = BOLEX.fstop || 5.6;
+ const iso = BOLEX.iso || 100;
+ const prism = BOLEX.prism || 0.8;
+
+ const cFstop = exif.ApertureValue || exif.FNumber;
+ const cExposure = exif.ExposureTime * 1000;
+ const cIso = exif.ISOSpeedRatings[0];
+
+ //convert fstop to "fnumber", an absolute scale where stops are scaled to 1.0
+ const f = fnumber(cFstop);
+ const target = fnumber(fstop); //bolex
+
+ let exposure = cExposure;
+ let isoStops = 0;
+ let fStops = 0;
+ let expDiff;
+
+ let scale_elem;
+ let exposure_elem;
+
+ let proceed;
+ let e1;
+ let e2;
+
+ mobile.exif = exif;
+
+ //Determine if fstop of phone camera "f"
+ if (target !== f) {
+ fStops = f - target;
+ exposure = exposure / Math.pow(2, fStops);
+ }
+
+ if (cIso != iso) {
+ isoStops = (Math.log(cIso) / Math.log(2)) - (Math.log(iso) / Math.log(2));
+ }
+
+ //Double or halve exposure based on the differences in ISO stops
+ exposure = exposure * Math.pow(2, isoStops);
+
+ //Compensate for Bolex prism
+ exposure = exposure * Math.pow(2, prism);
+
+ exposure = Math.round(exposure) //round to nearest millisecond
+
+ bol_f.value = fstop;
+ bol_iso.value = iso;
+ bol_exp.value = exposure;
+
+ //Total difference in exposure from phone camera to Bolex
+ expDiff = (Math.log(exposure) / Math.log(2)) - (Math.log(cExposure) / Math.log(2));
+
+ bol_exp_diff.innerHTML = floatDisplay(expDiff);
+ bol_iso_diff.innerHTML = floatDisplay(isoStops);
+ bol_f_diff.innerHTML = floatDisplay(-fStops);
+
+ cam_exp.value = cExposure;
+ cam_f.value = cFstop;
+ cam_iso.value = cIso;
+
+ function exposureConfirm (index) {
+ if (index === 1) {
+ e1 = new Event('change');
+ e2 = new Event('change');
+
+ scale_elem = document.getElementById('scale');
+ exposure_elem = document.getElementById('exposure');
+
+ scale_elem.value = 'ms';
+ scale_elem.dispatchEvent(e1);
+
+ exposure_elem.value = exposure;
+ exposure_elem.dispatchEvent(e2);
+ }
+ }
+
+ if (exposure > 500) {
+ navigator.notification.confirm(
+ `Set camera exposure to ${exposure}ms to match photo?`,
+ exposureConfirm,
+ 'INTVAL3',
+ ['Okay', 'Cancel']
+ );
+ }
+
+ /*
+{
+ "Exif": {
+ "DateTimeOriginal": "2018:02:02 16:59:13",
+ "ExposureBiasValue": 0,
+ "SensingMethod": 2,
+ "BrightnessValue": -0.9969016228800144,
+ "LensMake": "Apple",
+ "FNumber": 1.8,
+ "FocalLength": 3.99,
+ "ShutterSpeedValue": 2.049355412374274,
+ "SceneType": 1,
+ "ApertureValue": 1.6959938131099002,
+ "SubjectArea": [
+ 2015,
+ 1511,
+ 2217,
+ 1330
+ ],
+ "ColorSpace": 65535,
+ "LensSpecification": [
+ 3.99,
+ 3.99,
+ 1.8,
+ 1.8
+ ],
+ "PixelYDimension": 3024,
+ "WhiteBalance": 0,
+ "DateTimeDigitized": "2018:02:02 16:59:13",
+ "ExposureMode": 0,
+ "ISOSpeedRatings": [
+ 100
+ ],
+ "PixelXDimension": 4032,
+ "LensModel": "iPhone 8 back camera 3.99mm f/1.8",
+ "ExposureTime": 0.25,
+ "Flash": 24,
+ "SubsecTimeDigitized": "209",
+ "SubsecTimeOriginal": "209",
+ "ExposureProgram": 2,
+ "FocalLenIn35mmFilm": 28,
+ "MeteringMode": 5
+ }
+}
+ */
+};
+
+mobile.refreshExposure = function () {
+ if (typeof mobile.exif.ExposureTime !== 'undefined') {
+ mobile.cameraExposure(mobile.exif);
+ }
+};
+
+mobile.EV = function (fstop, shutter) {
+ const sec = shutter / 1000; //shutter in ms => seconds
+ const square = Math.pow(fstop, 2);
+ return Math.log(square / sec);
+};
+
+mobile.reset = function () {
+ let opts = {
+ type : 'reset'
+ };
+ function resetConfirm (index) {
+ if (index === 1) {
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)),
+ mobile.resetSuccess,
+ mobile.ble.onError);
+ }
+ }
+ navigator.notification.confirm(
+ `Reset INTVAL3 to default settings and clear counter?`,
+ resetConfirm,
+ 'INTVAL3',
+ ['Okay', 'Cancel']
+ );
+};
+
+mobile.resetSuccess = function () {
+ console.log('Reset to default settings');
+ setTimeout(() => {
+ mobile.getState();
+ }, 100)
+};
+
+mobile.update = function () {
+ let opts = {
+ type : 'update'
+ };
+ function updateConfirm (index) {
+ if (index === 1) {
+ UI.spinner.show('Updating INTVAL3...');
+ UI.overlay.show();
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)),
+ mobile.updateSuccess,
+ mobile.ble.onError);
+ }
+ }
+ navigator.notification.confirm(
+ `Check for updates? You will be disconnected from the INTVAL3 during this process.`,
+ updateConfirm,
+ 'INTVAL3',
+ ['Okay', 'Cancel']
+ );
+};
+
+mobile.updateSuccess = function () {
+ console.log('Finished updating firmware, restarting...');
+};
+
+mobile.restart = function () {
+ let opts = {
+ type : 'restart'
+ };
+ function restartConfirm (index) {
+ if (index === 1) {
+ UI.spinner.show('Restarting INTVAL3...');
+ UI.overlay.show();
+ ble.write(mobile.ble.device.id,
+ mobile.ble.SERVICE_ID,
+ mobile.ble.CHAR_ID,
+ stringToBytes(JSON.stringify(opts)),
+ mobile.restartSuccess,
+ mobile.ble.onError);
+ }
+ }
+ navigator.notification.confirm(
+ `Restart the INTVAL3? You will be disconnected from it during this process.`,
+ restartConfirm,
+ 'INTVAL3',
+ ['Okay', 'Cancel']
+ );
+};
+mobile.restartSuccess = function () {
+ console.log('Restarting... ');
+}
+
+mobile.alert = function (msg) {
+ if (navigator && navigator.notification) {
+ navigator.notification.alert(
+ msg,
+ () => {},
+ 'INTVAL3',
+ 'Okay'
+ );
+ } else {
+ alert(msg);
+ }
+};
+
+/**
+ * Mobile helper functions
+ */
+
+function bytesToString (buffer) {
+ return String.fromCharCode.apply(null, new Uint8Array(buffer));
+}
+
+function stringToBytes(string) {
+ var array = new Uint8Array(string.length);
+ for (var i = 0, l = string.length; i < l; i++) {
+ array[i] = string.charCodeAt(i);
+ }
+ return array.buffer;
+}
+
+function fnumber (fstop) {
+ return Math.log(fstop) / Math.log(Math.sqrt(2));
+}
+
+function floatDisplay (value) {
+ let str = value + '';
+ const period = str.indexOf('.');
+ if (period === -1) {
+ str = str + '.0';
+ } else {
+ str = roundTenth(value) + '';
+ }
+ if (value < 0) {
+ str = `${(str + '')}`;
+ } else if (value > 0) {
+ str = `+${(str + '')}`;
+ }
+ return str;
+}
+
+function roundTenth (value) {
+ return Math.round((value * 10) / 10)
+}
+
diff --git a/app/www/static/js/intval.mscript.js b/app/www/static/js/intval.mscript.js
new file mode 100644
index 0000000..aa04b33
--- /dev/null
+++ b/app/www/static/js/intval.mscript.js
@@ -0,0 +1,19 @@
+'use strict'
+const editor = {}
+
+editor.init = function () {
+ const elem = document.getElementById('mscript_editor');
+ editor.cm = CodeMirror.fromTextArea(elem, {
+ lineNumbers: true,
+ theme : 'monokai',
+ gutters: ['CodeMirror-linenumbers']
+ });
+ setTimeout(() => {
+ editor.cm.setValue('CF');
+ editor.cm.refresh();
+ }, 10);
+};
+
+document.addEventListener('DOMContentLoaded', event => {
+ editor.init();
+});
\ No newline at end of file
diff --git a/app/www/static/js/intval.web.js b/app/www/static/js/intval.web.js
new file mode 100644
index 0000000..1f294ce
--- /dev/null
+++ b/app/www/static/js/intval.web.js
@@ -0,0 +1,232 @@
+'use strict'
+const web = {};
+web._header = new Headers({ 'content-type' : 'application/json' })
+web.frame = function () {
+ const opts = {
+ method : 'POST',
+ headers : web._header
+ };
+ fetch('/frame', opts)
+ .then(res => {
+ return res.json()
+ })
+ .then(web.frameSuccess)
+ .catch(err => {
+ console.error('Error triggering frame')
+ console.error(err)
+ });
+}
+web.frameSuccess = function (res) {
+ document.getElementById('frame').blur();
+ console.log(`Frame ${res.dir ? 'forward' : 'backward'} took ${res.len}ms`)
+ if (res.dir === true) {
+ incCounter(1);
+ } else {
+ incCounter(-1);
+ }
+};
+web.setDir = function () {
+ const dir = !document.getElementById('dir').checked;
+ const opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({ dir : dir })
+ };
+ fetch('/dir', opts)
+ .then(res => {
+ return res.json()
+ })
+ .then(web.setDirSuccess)
+ .catch(err => {
+ console.error('Error setting direction')
+ console.error(err);
+ });
+};
+web.setDirSuccess = function (res) {
+ STATE.dir = res.dir;
+ setDirLabel(res.dir);
+ console.log(`setDir to ${res.dir}`);
+};
+web.getState = function () {
+ const opts = {
+ method : 'GET'
+ }
+ fetch('/status', opts)
+ .then(res => {
+ return res.json();
+ })
+ .then(setState)
+ .catch(err => {
+ console.error('Error getting state');
+ console.error(err);
+ });
+};
+web.setExposure = function () {
+ let exposure = document.getElementById('exposure').value;
+ let scaledExposure;
+ let opts
+ if (exposure === '' || exposure === null) {
+ exposure = 0;
+ }
+ scaledExposure = scaleTime(exposure, STATE.scale);
+ opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({ exposure : scaledExposure })
+ }
+ fetch('/exposure', opts)
+ .then(web.useJson)
+ .then(web.setExposureSuccess)
+ .catch(err => {
+ console.error('Error setting exposure');
+ console.error(err);
+ });
+};
+web.setExposureSuccess = function (res) {
+ let exposure;
+ if (res.exposure < BOLEX.expected) {
+ res.exposure = BOLEX.expected;
+ }
+ STATE.exposure = res.exposure;
+ exposure = shutter(STATE.exposure);
+ document.getElementById('str').innerHTML = exposure.str;
+ console.log(`setExposure to ${res.exposure}`);
+};
+web.setDelay = function () {
+ const delay = document.getElementById('delay').value;
+ const scaledDelay = scaleTime(delay, STATE.delayScale)
+ let opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({ delay : scaledDelay })
+ }
+ fetch('/delay', opts)
+ .then(web.useJson)
+ .then(web.setDelaySuccess)
+ .catch(err => {
+ console.error('Error setting delay');
+ console.error(err);
+ })
+};
+web.setDelaySuccess = function (res) {
+ STATE.delay = res.delay;
+ console.log(`setDelay to ${res.delay}`);
+};
+web.setCounter = function () {
+ const counter = document.getElementById('counter').value;
+ const change = prompt(`Change counter value?`, counter);
+ if (change === null || !isNumeric(change)) return false;
+ const opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({ counter : change })
+ }
+ fetch('/counter', opts)
+ .then(web.useJson)
+ .then(web.setCounterSuccess)
+ .catch(err => {
+ console.error('Error setting counter');
+ console.error(err);
+ })
+};
+web.setCounterSuccess = function (res) {
+ STATE.counter = res.counter;
+ forceCounter(res.counter);
+ console.log(`setCounter to ${res.counter}`);
+};
+web.sequence = function () {
+ const opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({})
+ }
+ fetch('/sequence', opts)
+ .then(web.useJson)
+ .then(web.sequenceSuccess)
+ .catch(err => {
+ console.error('Error getting /sequence');
+ console.error(err);
+ })
+};
+web.sequenceSuccess = function (res) {
+ if (res.started && res.started != false) {
+ STATE.sequence = true;
+ document.getElementById('seq').focus();
+ seqState(true);
+ } else if (res.stopped) {
+ STATE.sequence = false;
+ document.getElementById('seq').blur();
+ seqState(false);
+ mobile.getState();
+ }
+};
+web.reset = function () {
+ const opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({})
+ }
+ const proceed = confirm(`Reset INTVAL3 to default settings and clear counter?`);
+ if (!proceed) return false
+ fetch('/reset', opts)
+ .then(web.useJson)
+ .then(setState)
+ .catch(err => {
+ console.error('Error posting to /reset');
+ console.error(err);
+ })
+};
+web.restart = function () {
+ const opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({})
+ }
+ const proceed = confirm(`Restart the INTVAL3? You will be disconnected from it during this process.`);
+ if (!proceed) return false;
+ fetch('/restart', opts)
+ .then(web.useJson)
+ .then(web.restartSuccess)
+ .catch(err => {
+ console.error('Error posting to /restart');
+ console.error(err);
+ })
+};
+web.restartSuccess = function (res) {
+ console.dir(res)
+};
+web.update = function () {
+ const opts = {
+ method : 'POST',
+ headers : web._header,
+ body : JSON.stringify({})
+ }
+ const proceed = confirm(`Check for updates? You will be disconnected from the INTVAL3 during this process.`);
+ if (!proceed) return false;
+ fetch('/update', opts)
+ .then(web.useJson)
+ .then(web.updateSuccess)
+ .catch(err => {
+ console.error('Error posting to /update');
+ console.error(err);
+ })
+};
+web.updateSuccess = function (res) {
+ console.dir(res)
+};
+web.useJson = function (res) {
+ return res.json();
+};
+web.init = function () {
+ window.frame = web.frame;
+ window.getState = web.getState;
+ window.setDir = web.setDir;
+ window.setDelay = web.setDelay;
+ window.setExposure = web.setExposure;
+ window.setCounter = web.setCounter;
+ window.sequence = web.sequence;
+ window.reset = web.reset;
+ window.restart = web.restart;
+ window.update = web.update;
+ console.log('started web')
+};
\ No newline at end of file
diff --git a/app/www/static/js/qunit-2.5.0.js b/app/www/static/js/qunit-2.5.0.js
new file mode 100644
index 0000000..db72a26
--- /dev/null
+++ b/app/www/static/js/qunit-2.5.0.js
@@ -0,0 +1,5188 @@
+/*!
+ * QUnit 2.5.0
+ * https://qunitjs.com/
+ *
+ * Copyright jQuery Foundation and other contributors
+ * Released under the MIT license
+ * https://jquery.org/license
+ *
+ * Date: 2018-01-10T02:56Z
+ */
+(function (global$1) {
+ 'use strict';
+
+ global$1 = global$1 && global$1.hasOwnProperty('default') ? global$1['default'] : global$1;
+
+ var window = global$1.window;
+ var self$1 = global$1.self;
+ var console = global$1.console;
+ var setTimeout = global$1.setTimeout;
+ var clearTimeout = global$1.clearTimeout;
+
+ var document = window && window.document;
+ var navigator = window && window.navigator;
+
+ var localSessionStorage = function () {
+ var x = "qunit-test-string";
+ try {
+ global$1.sessionStorage.setItem(x, x);
+ global$1.sessionStorage.removeItem(x);
+ return global$1.sessionStorage;
+ } catch (e) {
+ return undefined;
+ }
+ }();
+
+ var _typeof = typeof Symbol === "function" && typeof Symbol.iterator === "symbol" ? function (obj) {
+ return typeof obj;
+ } : function (obj) {
+ return obj && typeof Symbol === "function" && obj.constructor === Symbol && obj !== Symbol.prototype ? "symbol" : typeof obj;
+ };
+
+
+
+
+
+
+
+
+
+
+
+ var classCallCheck = function (instance, Constructor) {
+ if (!(instance instanceof Constructor)) {
+ throw new TypeError("Cannot call a class as a function");
+ }
+ };
+
+ var createClass = function () {
+ function defineProperties(target, props) {
+ for (var i = 0; i < props.length; i++) {
+ var descriptor = props[i];
+ descriptor.enumerable = descriptor.enumerable || false;
+ descriptor.configurable = true;
+ if ("value" in descriptor) descriptor.writable = true;
+ Object.defineProperty(target, descriptor.key, descriptor);
+ }
+ }
+
+ return function (Constructor, protoProps, staticProps) {
+ if (protoProps) defineProperties(Constructor.prototype, protoProps);
+ if (staticProps) defineProperties(Constructor, staticProps);
+ return Constructor;
+ };
+ }();
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ var toConsumableArray = function (arr) {
+ if (Array.isArray(arr)) {
+ for (var i = 0, arr2 = Array(arr.length); i < arr.length; i++) arr2[i] = arr[i];
+
+ return arr2;
+ } else {
+ return Array.from(arr);
+ }
+ };
+
+ var toString = Object.prototype.toString;
+ var hasOwn = Object.prototype.hasOwnProperty;
+ var now = Date.now || function () {
+ return new Date().getTime();
+ };
+
+ var defined = {
+ document: window && window.document !== undefined,
+ setTimeout: setTimeout !== undefined
+ };
+
+ // Returns a new Array with the elements that are in a but not in b
+ function diff(a, b) {
+ var i,
+ j,
+ result = a.slice();
+
+ for (i = 0; i < result.length; i++) {
+ for (j = 0; j < b.length; j++) {
+ if (result[i] === b[j]) {
+ result.splice(i, 1);
+ i--;
+ break;
+ }
+ }
+ }
+ return result;
+ }
+
+ /**
+ * Determines whether an element exists in a given array or not.
+ *
+ * @method inArray
+ * @param {Any} elem
+ * @param {Array} array
+ * @return {Boolean}
+ */
+ function inArray(elem, array) {
+ return array.indexOf(elem) !== -1;
+ }
+
+ /**
+ * Makes a clone of an object using only Array or Object as base,
+ * and copies over the own enumerable properties.
+ *
+ * @param {Object} obj
+ * @return {Object} New object with only the own properties (recursively).
+ */
+ function objectValues(obj) {
+ var key,
+ val,
+ vals = is("array", obj) ? [] : {};
+ for (key in obj) {
+ if (hasOwn.call(obj, key)) {
+ val = obj[key];
+ vals[key] = val === Object(val) ? objectValues(val) : val;
+ }
+ }
+ return vals;
+ }
+
+ function extend(a, b, undefOnly) {
+ for (var prop in b) {
+ if (hasOwn.call(b, prop)) {
+ if (b[prop] === undefined) {
+ delete a[prop];
+ } else if (!(undefOnly && typeof a[prop] !== "undefined")) {
+ a[prop] = b[prop];
+ }
+ }
+ }
+
+ return a;
+ }
+
+ function objectType(obj) {
+ if (typeof obj === "undefined") {
+ return "undefined";
+ }
+
+ // Consider: typeof null === object
+ if (obj === null) {
+ return "null";
+ }
+
+ var match = toString.call(obj).match(/^\[object\s(.*)\]$/),
+ type = match && match[1];
+
+ switch (type) {
+ case "Number":
+ if (isNaN(obj)) {
+ return "nan";
+ }
+ return "number";
+ case "String":
+ case "Boolean":
+ case "Array":
+ case "Set":
+ case "Map":
+ case "Date":
+ case "RegExp":
+ case "Function":
+ case "Symbol":
+ return type.toLowerCase();
+ default:
+ return typeof obj === "undefined" ? "undefined" : _typeof(obj);
+ }
+ }
+
+ // Safe object type checking
+ function is(type, obj) {
+ return objectType(obj) === type;
+ }
+
+ // Based on Java's String.hashCode, a simple but not
+ // rigorously collision resistant hashing function
+ function generateHash(module, testName) {
+ var str = module + "\x1C" + testName;
+ var hash = 0;
+
+ for (var i = 0; i < str.length; i++) {
+ hash = (hash << 5) - hash + str.charCodeAt(i);
+ hash |= 0;
+ }
+
+ // Convert the possibly negative integer hash code into an 8 character hex string, which isn't
+ // strictly necessary but increases user understanding that the id is a SHA-like hash
+ var hex = (0x100000000 + hash).toString(16);
+ if (hex.length < 8) {
+ hex = "0000000" + hex;
+ }
+
+ return hex.slice(-8);
+ }
+
+ // Test for equality any JavaScript type.
+ // Authors: Philippe Rathé , David Chan
+ var equiv = (function () {
+
+ // Value pairs queued for comparison. Used for breadth-first processing order, recursion
+ // detection and avoiding repeated comparison (see below for details).
+ // Elements are { a: val, b: val }.
+ var pairs = [];
+
+ var getProto = Object.getPrototypeOf || function (obj) {
+ return obj.__proto__;
+ };
+
+ function useStrictEquality(a, b) {
+
+ // This only gets called if a and b are not strict equal, and is used to compare on
+ // the primitive values inside object wrappers. For example:
+ // `var i = 1;`
+ // `var j = new Number(1);`
+ // Neither a nor b can be null, as a !== b and they have the same type.
+ if ((typeof a === "undefined" ? "undefined" : _typeof(a)) === "object") {
+ a = a.valueOf();
+ }
+ if ((typeof b === "undefined" ? "undefined" : _typeof(b)) === "object") {
+ b = b.valueOf();
+ }
+
+ return a === b;
+ }
+
+ function compareConstructors(a, b) {
+ var protoA = getProto(a);
+ var protoB = getProto(b);
+
+ // Comparing constructors is more strict than using `instanceof`
+ if (a.constructor === b.constructor) {
+ return true;
+ }
+
+ // Ref #851
+ // If the obj prototype descends from a null constructor, treat it
+ // as a null prototype.
+ if (protoA && protoA.constructor === null) {
+ protoA = null;
+ }
+ if (protoB && protoB.constructor === null) {
+ protoB = null;
+ }
+
+ // Allow objects with no prototype to be equivalent to
+ // objects with Object as their constructor.
+ if (protoA === null && protoB === Object.prototype || protoB === null && protoA === Object.prototype) {
+ return true;
+ }
+
+ return false;
+ }
+
+ function getRegExpFlags(regexp) {
+ return "flags" in regexp ? regexp.flags : regexp.toString().match(/[gimuy]*$/)[0];
+ }
+
+ function isContainer(val) {
+ return ["object", "array", "map", "set"].indexOf(objectType(val)) !== -1;
+ }
+
+ function breadthFirstCompareChild(a, b) {
+
+ // If a is a container not reference-equal to b, postpone the comparison to the
+ // end of the pairs queue -- unless (a, b) has been seen before, in which case skip
+ // over the pair.
+ if (a === b) {
+ return true;
+ }
+ if (!isContainer(a)) {
+ return typeEquiv(a, b);
+ }
+ if (pairs.every(function (pair) {
+ return pair.a !== a || pair.b !== b;
+ })) {
+
+ // Not yet started comparing this pair
+ pairs.push({ a: a, b: b });
+ }
+ return true;
+ }
+
+ var callbacks = {
+ "string": useStrictEquality,
+ "boolean": useStrictEquality,
+ "number": useStrictEquality,
+ "null": useStrictEquality,
+ "undefined": useStrictEquality,
+ "symbol": useStrictEquality,
+ "date": useStrictEquality,
+
+ "nan": function nan() {
+ return true;
+ },
+
+ "regexp": function regexp(a, b) {
+ return a.source === b.source &&
+
+ // Include flags in the comparison
+ getRegExpFlags(a) === getRegExpFlags(b);
+ },
+
+ // abort (identical references / instance methods were skipped earlier)
+ "function": function _function() {
+ return false;
+ },
+
+ "array": function array(a, b) {
+ var i, len;
+
+ len = a.length;
+ if (len !== b.length) {
+
+ // Safe and faster
+ return false;
+ }
+
+ for (i = 0; i < len; i++) {
+
+ // Compare non-containers; queue non-reference-equal containers
+ if (!breadthFirstCompareChild(a[i], b[i])) {
+ return false;
+ }
+ }
+ return true;
+ },
+
+ // Define sets a and b to be equivalent if for each element aVal in a, there
+ // is some element bVal in b such that aVal and bVal are equivalent. Element
+ // repetitions are not counted, so these are equivalent:
+ // a = new Set( [ {}, [], [] ] );
+ // b = new Set( [ {}, {}, [] ] );
+ "set": function set$$1(a, b) {
+ var innerEq,
+ outerEq = true;
+
+ if (a.size !== b.size) {
+
+ // This optimization has certain quirks because of the lack of
+ // repetition counting. For instance, adding the same
+ // (reference-identical) element to two equivalent sets can
+ // make them non-equivalent.
+ return false;
+ }
+
+ a.forEach(function (aVal) {
+
+ // Short-circuit if the result is already known. (Using for...of
+ // with a break clause would be cleaner here, but it would cause
+ // a syntax error on older Javascript implementations even if
+ // Set is unused)
+ if (!outerEq) {
+ return;
+ }
+
+ innerEq = false;
+
+ b.forEach(function (bVal) {
+ var parentPairs;
+
+ // Likewise, short-circuit if the result is already known
+ if (innerEq) {
+ return;
+ }
+
+ // Swap out the global pairs list, as the nested call to
+ // innerEquiv will clobber its contents
+ parentPairs = pairs;
+ if (innerEquiv(bVal, aVal)) {
+ innerEq = true;
+ }
+
+ // Replace the global pairs list
+ pairs = parentPairs;
+ });
+
+ if (!innerEq) {
+ outerEq = false;
+ }
+ });
+
+ return outerEq;
+ },
+
+ // Define maps a and b to be equivalent if for each key-value pair (aKey, aVal)
+ // in a, there is some key-value pair (bKey, bVal) in b such that
+ // [ aKey, aVal ] and [ bKey, bVal ] are equivalent. Key repetitions are not
+ // counted, so these are equivalent:
+ // a = new Map( [ [ {}, 1 ], [ {}, 1 ], [ [], 1 ] ] );
+ // b = new Map( [ [ {}, 1 ], [ [], 1 ], [ [], 1 ] ] );
+ "map": function map(a, b) {
+ var innerEq,
+ outerEq = true;
+
+ if (a.size !== b.size) {
+
+ // This optimization has certain quirks because of the lack of
+ // repetition counting. For instance, adding the same
+ // (reference-identical) key-value pair to two equivalent maps
+ // can make them non-equivalent.
+ return false;
+ }
+
+ a.forEach(function (aVal, aKey) {
+
+ // Short-circuit if the result is already known. (Using for...of
+ // with a break clause would be cleaner here, but it would cause
+ // a syntax error on older Javascript implementations even if
+ // Map is unused)
+ if (!outerEq) {
+ return;
+ }
+
+ innerEq = false;
+
+ b.forEach(function (bVal, bKey) {
+ var parentPairs;
+
+ // Likewise, short-circuit if the result is already known
+ if (innerEq) {
+ return;
+ }
+
+ // Swap out the global pairs list, as the nested call to
+ // innerEquiv will clobber its contents
+ parentPairs = pairs;
+ if (innerEquiv([bVal, bKey], [aVal, aKey])) {
+ innerEq = true;
+ }
+
+ // Replace the global pairs list
+ pairs = parentPairs;
+ });
+
+ if (!innerEq) {
+ outerEq = false;
+ }
+ });
+
+ return outerEq;
+ },
+
+ "object": function object(a, b) {
+ var i,
+ aProperties = [],
+ bProperties = [];
+
+ if (compareConstructors(a, b) === false) {
+ return false;
+ }
+
+ // Be strict: don't ensure hasOwnProperty and go deep
+ for (i in a) {
+
+ // Collect a's properties
+ aProperties.push(i);
+
+ // Skip OOP methods that look the same
+ if (a.constructor !== Object && typeof a.constructor !== "undefined" && typeof a[i] === "function" && typeof b[i] === "function" && a[i].toString() === b[i].toString()) {
+ continue;
+ }
+
+ // Compare non-containers; queue non-reference-equal containers
+ if (!breadthFirstCompareChild(a[i], b[i])) {
+ return false;
+ }
+ }
+
+ for (i in b) {
+
+ // Collect b's properties
+ bProperties.push(i);
+ }
+
+ // Ensures identical properties name
+ return typeEquiv(aProperties.sort(), bProperties.sort());
+ }
+ };
+
+ function typeEquiv(a, b) {
+ var type = objectType(a);
+
+ // Callbacks for containers will append to the pairs queue to achieve breadth-first
+ // search order. The pairs queue is also used to avoid reprocessing any pair of
+ // containers that are reference-equal to a previously visited pair (a special case
+ // this being recursion detection).
+ //
+ // Because of this approach, once typeEquiv returns a false value, it should not be
+ // called again without clearing the pair queue else it may wrongly report a visited
+ // pair as being equivalent.
+ return objectType(b) === type && callbacks[type](a, b);
+ }
+
+ function innerEquiv(a, b) {
+ var i, pair;
+
+ // We're done when there's nothing more to compare
+ if (arguments.length < 2) {
+ return true;
+ }
+
+ // Clear the global pair queue and add the top-level values being compared
+ pairs = [{ a: a, b: b }];
+
+ for (i = 0; i < pairs.length; i++) {
+ pair = pairs[i];
+
+ // Perform type-specific comparison on any pairs that are not strictly
+ // equal. For container types, that comparison will postpone comparison
+ // of any sub-container pair to the end of the pair queue. This gives
+ // breadth-first search order. It also avoids the reprocessing of
+ // reference-equal siblings, cousins etc, which can have a significant speed
+ // impact when comparing a container of small objects each of which has a
+ // reference to the same (singleton) large object.
+ if (pair.a !== pair.b && !typeEquiv(pair.a, pair.b)) {
+ return false;
+ }
+ }
+
+ // ...across all consecutive argument pairs
+ return arguments.length === 2 || innerEquiv.apply(this, [].slice.call(arguments, 1));
+ }
+
+ return function () {
+ var result = innerEquiv.apply(undefined, arguments);
+
+ // Release any retained objects
+ pairs.length = 0;
+ return result;
+ };
+ })();
+
+ /**
+ * Config object: Maintain internal state
+ * Later exposed as QUnit.config
+ * `config` initialized at top of scope
+ */
+ var config = {
+
+ // The queue of tests to run
+ queue: [],
+
+ // Block until document ready
+ blocking: true,
+
+ // By default, run previously failed tests first
+ // very useful in combination with "Hide passed tests" checked
+ reorder: true,
+
+ // By default, modify document.title when suite is done
+ altertitle: true,
+
+ // HTML Reporter: collapse every test except the first failing test
+ // If false, all failing tests will be expanded
+ collapse: true,
+
+ // By default, scroll to top of the page when suite is done
+ scrolltop: true,
+
+ // Depth up-to which object will be dumped
+ maxDepth: 5,
+
+ // When enabled, all tests must call expect()
+ requireExpects: false,
+
+ // Placeholder for user-configurable form-exposed URL parameters
+ urlConfig: [],
+
+ // Set of all modules.
+ modules: [],
+
+ // The first unnamed module
+ currentModule: {
+ name: "",
+ tests: [],
+ childModules: [],
+ testsRun: 0,
+ unskippedTestsRun: 0,
+ hooks: {
+ before: [],
+ beforeEach: [],
+ afterEach: [],
+ after: []
+ }
+ },
+
+ callbacks: {},
+
+ // The storage module to use for reordering tests
+ storage: localSessionStorage
+ };
+
+ // take a predefined QUnit.config and extend the defaults
+ var globalConfig = window && window.QUnit && window.QUnit.config;
+
+ // only extend the global config if there is no QUnit overload
+ if (window && window.QUnit && !window.QUnit.version) {
+ extend(config, globalConfig);
+ }
+
+ // Push a loose unnamed module to the modules collection
+ config.modules.push(config.currentModule);
+
+ // Based on jsDump by Ariel Flesler
+ // http://flesler.blogspot.com/2008/05/jsdump-pretty-dump-of-any-javascript.html
+ var dump = (function () {
+ function quote(str) {
+ return "\"" + str.toString().replace(/\\/g, "\\\\").replace(/"/g, "\\\"") + "\"";
+ }
+ function literal(o) {
+ return o + "";
+ }
+ function join(pre, arr, post) {
+ var s = dump.separator(),
+ base = dump.indent(),
+ inner = dump.indent(1);
+ if (arr.join) {
+ arr = arr.join("," + s + inner);
+ }
+ if (!arr) {
+ return pre + post;
+ }
+ return [pre, inner + arr, base + post].join(s);
+ }
+ function array(arr, stack) {
+ var i = arr.length,
+ ret = new Array(i);
+
+ if (dump.maxDepth && dump.depth > dump.maxDepth) {
+ return "[object Array]";
+ }
+
+ this.up();
+ while (i--) {
+ ret[i] = this.parse(arr[i], undefined, stack);
+ }
+ this.down();
+ return join("[", ret, "]");
+ }
+
+ function isArray(obj) {
+ return (
+
+ //Native Arrays
+ toString.call(obj) === "[object Array]" ||
+
+ // NodeList objects
+ typeof obj.length === "number" && obj.item !== undefined && (obj.length ? obj.item(0) === obj[0] : obj.item(0) === null && obj[0] === undefined)
+ );
+ }
+
+ var reName = /^function (\w+)/,
+ dump = {
+
+ // The objType is used mostly internally, you can fix a (custom) type in advance
+ parse: function parse(obj, objType, stack) {
+ stack = stack || [];
+ var res,
+ parser,
+ parserType,
+ objIndex = stack.indexOf(obj);
+
+ if (objIndex !== -1) {
+ return "recursion(" + (objIndex - stack.length) + ")";
+ }
+
+ objType = objType || this.typeOf(obj);
+ parser = this.parsers[objType];
+ parserType = typeof parser === "undefined" ? "undefined" : _typeof(parser);
+
+ if (parserType === "function") {
+ stack.push(obj);
+ res = parser.call(this, obj, stack);
+ stack.pop();
+ return res;
+ }
+ return parserType === "string" ? parser : this.parsers.error;
+ },
+ typeOf: function typeOf(obj) {
+ var type;
+
+ if (obj === null) {
+ type = "null";
+ } else if (typeof obj === "undefined") {
+ type = "undefined";
+ } else if (is("regexp", obj)) {
+ type = "regexp";
+ } else if (is("date", obj)) {
+ type = "date";
+ } else if (is("function", obj)) {
+ type = "function";
+ } else if (obj.setInterval !== undefined && obj.document !== undefined && obj.nodeType === undefined) {
+ type = "window";
+ } else if (obj.nodeType === 9) {
+ type = "document";
+ } else if (obj.nodeType) {
+ type = "node";
+ } else if (isArray(obj)) {
+ type = "array";
+ } else if (obj.constructor === Error.prototype.constructor) {
+ type = "error";
+ } else {
+ type = typeof obj === "undefined" ? "undefined" : _typeof(obj);
+ }
+ return type;
+ },
+
+ separator: function separator() {
+ if (this.multiline) {
+ return this.HTML ? "
" : "\n";
+ } else {
+ return this.HTML ? " " : " ";
+ }
+ },
+
+ // Extra can be a number, shortcut for increasing-calling-decreasing
+ indent: function indent(extra) {
+ if (!this.multiline) {
+ return "";
+ }
+ var chr = this.indentChar;
+ if (this.HTML) {
+ chr = chr.replace(/\t/g, " ").replace(/ /g, " ");
+ }
+ return new Array(this.depth + (extra || 0)).join(chr);
+ },
+ up: function up(a) {
+ this.depth += a || 1;
+ },
+ down: function down(a) {
+ this.depth -= a || 1;
+ },
+ setParser: function setParser(name, parser) {
+ this.parsers[name] = parser;
+ },
+
+ // The next 3 are exposed so you can use them
+ quote: quote,
+ literal: literal,
+ join: join,
+ depth: 1,
+ maxDepth: config.maxDepth,
+
+ // This is the list of parsers, to modify them, use dump.setParser
+ parsers: {
+ window: "[Window]",
+ document: "[Document]",
+ error: function error(_error) {
+ return "Error(\"" + _error.message + "\")";
+ },
+ unknown: "[Unknown]",
+ "null": "null",
+ "undefined": "undefined",
+ "function": function _function(fn) {
+ var ret = "function",
+
+
+ // Functions never have name in IE
+ name = "name" in fn ? fn.name : (reName.exec(fn) || [])[1];
+
+ if (name) {
+ ret += " " + name;
+ }
+ ret += "(";
+
+ ret = [ret, dump.parse(fn, "functionArgs"), "){"].join("");
+ return join(ret, dump.parse(fn, "functionCode"), "}");
+ },
+ array: array,
+ nodelist: array,
+ "arguments": array,
+ object: function object(map, stack) {
+ var keys,
+ key,
+ val,
+ i,
+ nonEnumerableProperties,
+ ret = [];
+
+ if (dump.maxDepth && dump.depth > dump.maxDepth) {
+ return "[object Object]";
+ }
+
+ dump.up();
+ keys = [];
+ for (key in map) {
+ keys.push(key);
+ }
+
+ // Some properties are not always enumerable on Error objects.
+ nonEnumerableProperties = ["message", "name"];
+ for (i in nonEnumerableProperties) {
+ key = nonEnumerableProperties[i];
+ if (key in map && !inArray(key, keys)) {
+ keys.push(key);
+ }
+ }
+ keys.sort();
+ for (i = 0; i < keys.length; i++) {
+ key = keys[i];
+ val = map[key];
+ ret.push(dump.parse(key, "key") + ": " + dump.parse(val, undefined, stack));
+ }
+ dump.down();
+ return join("{", ret, "}");
+ },
+ node: function node(_node) {
+ var len,
+ i,
+ val,
+ open = dump.HTML ? "<" : "<",
+ close = dump.HTML ? ">" : ">",
+ tag = _node.nodeName.toLowerCase(),
+ ret = open + tag,
+ attrs = _node.attributes;
+
+ if (attrs) {
+ for (i = 0, len = attrs.length; i < len; i++) {
+ val = attrs[i].nodeValue;
+
+ // IE6 includes all attributes in .attributes, even ones not explicitly
+ // set. Those have values like undefined, null, 0, false, "" or
+ // "inherit".
+ if (val && val !== "inherit") {
+ ret += " " + attrs[i].nodeName + "=" + dump.parse(val, "attribute");
+ }
+ }
+ }
+ ret += close;
+
+ // Show content of TextNode or CDATASection
+ if (_node.nodeType === 3 || _node.nodeType === 4) {
+ ret += _node.nodeValue;
+ }
+
+ return ret + open + "/" + tag + close;
+ },
+
+ // Function calls it internally, it's the arguments part of the function
+ functionArgs: function functionArgs(fn) {
+ var args,
+ l = fn.length;
+
+ if (!l) {
+ return "";
+ }
+
+ args = new Array(l);
+ while (l--) {
+
+ // 97 is 'a'
+ args[l] = String.fromCharCode(97 + l);
+ }
+ return " " + args.join(", ") + " ";
+ },
+
+ // Object calls it internally, the key part of an item in a map
+ key: quote,
+
+ // Function calls it internally, it's the content of the function
+ functionCode: "[code]",
+
+ // Node calls it internally, it's a html attribute value
+ attribute: quote,
+ string: quote,
+ date: quote,
+ regexp: literal,
+ number: literal,
+ "boolean": literal,
+ symbol: function symbol(sym) {
+ return sym.toString();
+ }
+ },
+
+ // If true, entities are escaped ( <, >, \t, space and \n )
+ HTML: false,
+
+ // Indentation unit
+ indentChar: " ",
+
+ // If true, items in a collection, are separated by a \n, else just a space.
+ multiline: true
+ };
+
+ return dump;
+ })();
+
+ var LISTENERS = Object.create(null);
+ var SUPPORTED_EVENTS = ["runStart", "suiteStart", "testStart", "assertion", "testEnd", "suiteEnd", "runEnd"];
+
+ /**
+ * Emits an event with the specified data to all currently registered listeners.
+ * Callbacks will fire in the order in which they are registered (FIFO). This
+ * function is not exposed publicly; it is used by QUnit internals to emit
+ * logging events.
+ *
+ * @private
+ * @method emit
+ * @param {String} eventName
+ * @param {Object} data
+ * @return {Void}
+ */
+ function emit(eventName, data) {
+ if (objectType(eventName) !== "string") {
+ throw new TypeError("eventName must be a string when emitting an event");
+ }
+
+ // Clone the callbacks in case one of them registers a new callback
+ var originalCallbacks = LISTENERS[eventName];
+ var callbacks = originalCallbacks ? [].concat(toConsumableArray(originalCallbacks)) : [];
+
+ for (var i = 0; i < callbacks.length; i++) {
+ callbacks[i](data);
+ }
+ }
+
+ /**
+ * Registers a callback as a listener to the specified event.
+ *
+ * @public
+ * @method on
+ * @param {String} eventName
+ * @param {Function} callback
+ * @return {Void}
+ */
+ function on(eventName, callback) {
+ if (objectType(eventName) !== "string") {
+ throw new TypeError("eventName must be a string when registering a listener");
+ } else if (!inArray(eventName, SUPPORTED_EVENTS)) {
+ var events = SUPPORTED_EVENTS.join(", ");
+ throw new Error("\"" + eventName + "\" is not a valid event; must be one of: " + events + ".");
+ } else if (objectType(callback) !== "function") {
+ throw new TypeError("callback must be a function when registering a listener");
+ }
+
+ if (!LISTENERS[eventName]) {
+ LISTENERS[eventName] = [];
+ }
+
+ // Don't register the same callback more than once
+ if (!inArray(callback, LISTENERS[eventName])) {
+ LISTENERS[eventName].push(callback);
+ }
+ }
+
+ // Register logging callbacks
+ function registerLoggingCallbacks(obj) {
+ var i,
+ l,
+ key,
+ callbackNames = ["begin", "done", "log", "testStart", "testDone", "moduleStart", "moduleDone"];
+
+ function registerLoggingCallback(key) {
+ var loggingCallback = function loggingCallback(callback) {
+ if (objectType(callback) !== "function") {
+ throw new Error("QUnit logging methods require a callback function as their first parameters.");
+ }
+
+ config.callbacks[key].push(callback);
+ };
+
+ return loggingCallback;
+ }
+
+ for (i = 0, l = callbackNames.length; i < l; i++) {
+ key = callbackNames[i];
+
+ // Initialize key collection of logging callback
+ if (objectType(config.callbacks[key]) === "undefined") {
+ config.callbacks[key] = [];
+ }
+
+ obj[key] = registerLoggingCallback(key);
+ }
+ }
+
+ function runLoggingCallbacks(key, args) {
+ var i, l, callbacks;
+
+ callbacks = config.callbacks[key];
+ for (i = 0, l = callbacks.length; i < l; i++) {
+ callbacks[i](args);
+ }
+ }
+
+ // Doesn't support IE9, it will return undefined on these browsers
+ // See also https://developer.mozilla.org/en/JavaScript/Reference/Global_Objects/Error/Stack
+ var fileName = (sourceFromStacktrace(0) || "").replace(/(:\d+)+\)?/, "").replace(/.+\//, "");
+
+ function extractStacktrace(e, offset) {
+ offset = offset === undefined ? 4 : offset;
+
+ var stack, include, i;
+
+ if (e && e.stack) {
+ stack = e.stack.split("\n");
+ if (/^error$/i.test(stack[0])) {
+ stack.shift();
+ }
+ if (fileName) {
+ include = [];
+ for (i = offset; i < stack.length; i++) {
+ if (stack[i].indexOf(fileName) !== -1) {
+ break;
+ }
+ include.push(stack[i]);
+ }
+ if (include.length) {
+ return include.join("\n");
+ }
+ }
+ return stack[offset];
+ }
+ }
+
+ function sourceFromStacktrace(offset) {
+ var error = new Error();
+
+ // Support: Safari <=7 only, IE <=10 - 11 only
+ // Not all browsers generate the `stack` property for `new Error()`, see also #636
+ if (!error.stack) {
+ try {
+ throw error;
+ } catch (err) {
+ error = err;
+ }
+ }
+
+ return extractStacktrace(error, offset);
+ }
+
+ var priorityCount = 0;
+ var unitSampler = void 0;
+
+ /**
+ * Advances the ProcessingQueue to the next item if it is ready.
+ * @param {Boolean} last
+ */
+ function advance() {
+ var start = now();
+ config.depth = (config.depth || 0) + 1;
+
+ while (config.queue.length && !config.blocking) {
+ var elapsedTime = now() - start;
+
+ if (!defined.setTimeout || config.updateRate <= 0 || elapsedTime < config.updateRate) {
+ if (priorityCount > 0) {
+ priorityCount--;
+ }
+
+ config.queue.shift()();
+ } else {
+ setTimeout(advance);
+ break;
+ }
+ }
+
+ config.depth--;
+
+ if (!config.blocking && !config.queue.length && config.depth === 0) {
+ done();
+ }
+ }
+
+ function addToQueueImmediate(callback) {
+ if (objectType(callback) === "array") {
+ while (callback.length) {
+ addToQueueImmediate(callback.pop());
+ }
+
+ return;
+ }
+
+ config.queue.unshift(callback);
+ priorityCount++;
+ }
+
+ /**
+ * Adds a function to the ProcessingQueue for execution.
+ * @param {Function|Array} callback
+ * @param {Boolean} priority
+ * @param {String} seed
+ */
+ function addToQueue(callback, prioritize, seed) {
+ if (prioritize) {
+ config.queue.splice(priorityCount++, 0, callback);
+ } else if (seed) {
+ if (!unitSampler) {
+ unitSampler = unitSamplerGenerator(seed);
+ }
+
+ // Insert into a random position after all prioritized items
+ var index = Math.floor(unitSampler() * (config.queue.length - priorityCount + 1));
+ config.queue.splice(priorityCount + index, 0, callback);
+ } else {
+ config.queue.push(callback);
+ }
+ }
+
+ /**
+ * Creates a seeded "sample" generator which is used for randomizing tests.
+ */
+ function unitSamplerGenerator(seed) {
+
+ // 32-bit xorshift, requires only a nonzero seed
+ // http://excamera.com/sphinx/article-xorshift.html
+ var sample = parseInt(generateHash(seed), 16) || -1;
+ return function () {
+ sample ^= sample << 13;
+ sample ^= sample >>> 17;
+ sample ^= sample << 5;
+
+ // ECMAScript has no unsigned number type
+ if (sample < 0) {
+ sample += 0x100000000;
+ }
+
+ return sample / 0x100000000;
+ };
+ }
+
+ /**
+ * This function is called when the ProcessingQueue is done processing all
+ * items. It handles emitting the final run events.
+ */
+ function done() {
+ var storage = config.storage;
+
+ ProcessingQueue.finished = true;
+
+ var runtime = now() - config.started;
+ var passed = config.stats.all - config.stats.bad;
+
+ emit("runEnd", globalSuite.end(true));
+ runLoggingCallbacks("done", {
+ passed: passed,
+ failed: config.stats.bad,
+ total: config.stats.all,
+ runtime: runtime
+ });
+
+ // Clear own storage items if all tests passed
+ if (storage && config.stats.bad === 0) {
+ for (var i = storage.length - 1; i >= 0; i--) {
+ var key = storage.key(i);
+
+ if (key.indexOf("qunit-test-") === 0) {
+ storage.removeItem(key);
+ }
+ }
+ }
+ }
+
+ var ProcessingQueue = {
+ finished: false,
+ add: addToQueue,
+ addImmediate: addToQueueImmediate,
+ advance: advance
+ };
+
+ var TestReport = function () {
+ function TestReport(name, suite, options) {
+ classCallCheck(this, TestReport);
+
+ this.name = name;
+ this.suiteName = suite.name;
+ this.fullName = suite.fullName.concat(name);
+ this.runtime = 0;
+ this.assertions = [];
+
+ this.skipped = !!options.skip;
+ this.todo = !!options.todo;
+
+ this.valid = options.valid;
+
+ this._startTime = 0;
+ this._endTime = 0;
+
+ suite.pushTest(this);
+ }
+
+ createClass(TestReport, [{
+ key: "start",
+ value: function start(recordTime) {
+ if (recordTime) {
+ this._startTime = Date.now();
+ }
+
+ return {
+ name: this.name,
+ suiteName: this.suiteName,
+ fullName: this.fullName.slice()
+ };
+ }
+ }, {
+ key: "end",
+ value: function end(recordTime) {
+ if (recordTime) {
+ this._endTime = Date.now();
+ }
+
+ return extend(this.start(), {
+ runtime: this.getRuntime(),
+ status: this.getStatus(),
+ errors: this.getFailedAssertions(),
+ assertions: this.getAssertions()
+ });
+ }
+ }, {
+ key: "pushAssertion",
+ value: function pushAssertion(assertion) {
+ this.assertions.push(assertion);
+ }
+ }, {
+ key: "getRuntime",
+ value: function getRuntime() {
+ return this._endTime - this._startTime;
+ }
+ }, {
+ key: "getStatus",
+ value: function getStatus() {
+ if (this.skipped) {
+ return "skipped";
+ }
+
+ var testPassed = this.getFailedAssertions().length > 0 ? this.todo : !this.todo;
+
+ if (!testPassed) {
+ return "failed";
+ } else if (this.todo) {
+ return "todo";
+ } else {
+ return "passed";
+ }
+ }
+ }, {
+ key: "getFailedAssertions",
+ value: function getFailedAssertions() {
+ return this.assertions.filter(function (assertion) {
+ return !assertion.passed;
+ });
+ }
+ }, {
+ key: "getAssertions",
+ value: function getAssertions() {
+ return this.assertions.slice();
+ }
+
+ // Remove actual and expected values from assertions. This is to prevent
+ // leaking memory throughout a test suite.
+
+ }, {
+ key: "slimAssertions",
+ value: function slimAssertions() {
+ this.assertions = this.assertions.map(function (assertion) {
+ delete assertion.actual;
+ delete assertion.expected;
+ return assertion;
+ });
+ }
+ }]);
+ return TestReport;
+ }();
+
+ var focused$1 = false;
+
+ function Test(settings) {
+ var i, l;
+
+ ++Test.count;
+
+ this.expected = null;
+ this.assertions = [];
+ this.semaphore = 0;
+ this.module = config.currentModule;
+ this.stack = sourceFromStacktrace(3);
+ this.steps = [];
+ this.timeout = undefined;
+
+ // If a module is skipped, all its tests and the tests of the child suites
+ // should be treated as skipped even if they are defined as `only` or `todo`.
+ // As for `todo` module, all its tests will be treated as `todo` except for
+ // tests defined as `skip` which will be left intact.
+ //
+ // So, if a test is defined as `todo` and is inside a skipped module, we should
+ // then treat that test as if was defined as `skip`.
+ if (this.module.skip) {
+ settings.skip = true;
+ settings.todo = false;
+
+ // Skipped tests should be left intact
+ } else if (this.module.todo && !settings.skip) {
+ settings.todo = true;
+ }
+
+ extend(this, settings);
+
+ this.testReport = new TestReport(settings.testName, this.module.suiteReport, {
+ todo: settings.todo,
+ skip: settings.skip,
+ valid: this.valid()
+ });
+
+ // Register unique strings
+ for (i = 0, l = this.module.tests; i < l.length; i++) {
+ if (this.module.tests[i].name === this.testName) {
+ this.testName += " ";
+ }
+ }
+
+ this.testId = generateHash(this.module.name, this.testName);
+
+ this.module.tests.push({
+ name: this.testName,
+ testId: this.testId,
+ skip: !!settings.skip
+ });
+
+ if (settings.skip) {
+
+ // Skipped tests will fully ignore any sent callback
+ this.callback = function () {};
+ this.async = false;
+ this.expected = 0;
+ } else {
+ if (typeof this.callback !== "function") {
+ var method = this.todo ? "todo" : "test";
+
+ // eslint-disable-next-line max-len
+ throw new TypeError("You must provide a function as a test callback to QUnit." + method + "(\"" + settings.testName + "\")");
+ }
+
+ this.assert = new Assert(this);
+ }
+ }
+
+ Test.count = 0;
+
+ function getNotStartedModules(startModule) {
+ var module = startModule,
+ modules = [];
+
+ while (module && module.testsRun === 0) {
+ modules.push(module);
+ module = module.parentModule;
+ }
+
+ return modules;
+ }
+
+ Test.prototype = {
+ before: function before() {
+ var i,
+ startModule,
+ module = this.module,
+ notStartedModules = getNotStartedModules(module);
+
+ for (i = notStartedModules.length - 1; i >= 0; i--) {
+ startModule = notStartedModules[i];
+ startModule.stats = { all: 0, bad: 0, started: now() };
+ emit("suiteStart", startModule.suiteReport.start(true));
+ runLoggingCallbacks("moduleStart", {
+ name: startModule.name,
+ tests: startModule.tests
+ });
+ }
+
+ config.current = this;
+
+ this.testEnvironment = extend({}, module.testEnvironment);
+
+ this.started = now();
+ emit("testStart", this.testReport.start(true));
+ runLoggingCallbacks("testStart", {
+ name: this.testName,
+ module: module.name,
+ testId: this.testId,
+ previousFailure: this.previousFailure
+ });
+
+ if (!config.pollution) {
+ saveGlobal();
+ }
+ },
+
+ run: function run() {
+ var promise;
+
+ config.current = this;
+
+ this.callbackStarted = now();
+
+ if (config.notrycatch) {
+ runTest(this);
+ return;
+ }
+
+ try {
+ runTest(this);
+ } catch (e) {
+ this.pushFailure("Died on test #" + (this.assertions.length + 1) + " " + this.stack + ": " + (e.message || e), extractStacktrace(e, 0));
+
+ // Else next test will carry the responsibility
+ saveGlobal();
+
+ // Restart the tests if they're blocking
+ if (config.blocking) {
+ internalRecover(this);
+ }
+ }
+
+ function runTest(test) {
+ promise = test.callback.call(test.testEnvironment, test.assert);
+ test.resolvePromise(promise);
+
+ // If the test has a "lock" on it, but the timeout is 0, then we push a
+ // failure as the test should be synchronous.
+ if (test.timeout === 0 && test.semaphore !== 0) {
+ pushFailure("Test did not finish synchronously even though assert.timeout( 0 ) was used.", sourceFromStacktrace(2));
+ }
+ }
+ },
+
+ after: function after() {
+ checkPollution();
+ },
+
+ queueHook: function queueHook(hook, hookName, hookOwner) {
+ var _this = this;
+
+ var callHook = function callHook() {
+ var promise = hook.call(_this.testEnvironment, _this.assert);
+ _this.resolvePromise(promise, hookName);
+ };
+
+ var runHook = function runHook() {
+ if (hookName === "before") {
+ if (hookOwner.unskippedTestsRun !== 0) {
+ return;
+ }
+
+ _this.preserveEnvironment = true;
+ }
+
+ if (hookName === "after" && hookOwner.unskippedTestsRun !== numberOfUnskippedTests(hookOwner) - 1 && config.queue.length > 2) {
+ return;
+ }
+
+ config.current = _this;
+ if (config.notrycatch) {
+ callHook();
+ return;
+ }
+ try {
+ callHook();
+ } catch (error) {
+ _this.pushFailure(hookName + " failed on " + _this.testName + ": " + (error.message || error), extractStacktrace(error, 0));
+ }
+ };
+
+ return runHook;
+ },
+
+
+ // Currently only used for module level hooks, can be used to add global level ones
+ hooks: function hooks(handler) {
+ var hooks = [];
+
+ function processHooks(test, module) {
+ if (module.parentModule) {
+ processHooks(test, module.parentModule);
+ }
+
+ if (module.hooks[handler].length) {
+ for (var i = 0; i < module.hooks[handler].length; i++) {
+ hooks.push(test.queueHook(module.hooks[handler][i], handler, module));
+ }
+ }
+ }
+
+ // Hooks are ignored on skipped tests
+ if (!this.skip) {
+ processHooks(this, this.module);
+ }
+
+ return hooks;
+ },
+
+
+ finish: function finish() {
+ config.current = this;
+ if (config.requireExpects && this.expected === null) {
+ this.pushFailure("Expected number of assertions to be defined, but expect() was " + "not called.", this.stack);
+ } else if (this.expected !== null && this.expected !== this.assertions.length) {
+ this.pushFailure("Expected " + this.expected + " assertions, but " + this.assertions.length + " were run", this.stack);
+ } else if (this.expected === null && !this.assertions.length) {
+ this.pushFailure("Expected at least one assertion, but none were run - call " + "expect(0) to accept zero assertions.", this.stack);
+ }
+
+ var i,
+ module = this.module,
+ moduleName = module.name,
+ testName = this.testName,
+ skipped = !!this.skip,
+ todo = !!this.todo,
+ bad = 0,
+ storage = config.storage;
+
+ this.runtime = now() - this.started;
+
+ config.stats.all += this.assertions.length;
+ module.stats.all += this.assertions.length;
+
+ for (i = 0; i < this.assertions.length; i++) {
+ if (!this.assertions[i].result) {
+ bad++;
+ config.stats.bad++;
+ module.stats.bad++;
+ }
+ }
+
+ notifyTestsRan(module, skipped);
+
+ // Store result when possible
+ if (storage) {
+ if (bad) {
+ storage.setItem("qunit-test-" + moduleName + "-" + testName, bad);
+ } else {
+ storage.removeItem("qunit-test-" + moduleName + "-" + testName);
+ }
+ }
+
+ // After emitting the js-reporters event we cleanup the assertion data to
+ // avoid leaking it. It is not used by the legacy testDone callbacks.
+ emit("testEnd", this.testReport.end(true));
+ this.testReport.slimAssertions();
+
+ runLoggingCallbacks("testDone", {
+ name: testName,
+ module: moduleName,
+ skipped: skipped,
+ todo: todo,
+ failed: bad,
+ passed: this.assertions.length - bad,
+ total: this.assertions.length,
+ runtime: skipped ? 0 : this.runtime,
+
+ // HTML Reporter use
+ assertions: this.assertions,
+ testId: this.testId,
+
+ // Source of Test
+ source: this.stack
+ });
+
+ if (module.testsRun === numberOfTests(module)) {
+ logSuiteEnd(module);
+
+ // Check if the parent modules, iteratively, are done. If that the case,
+ // we emit the `suiteEnd` event and trigger `moduleDone` callback.
+ var parent = module.parentModule;
+ while (parent && parent.testsRun === numberOfTests(parent)) {
+ logSuiteEnd(parent);
+ parent = parent.parentModule;
+ }
+ }
+
+ config.current = undefined;
+
+ function logSuiteEnd(module) {
+ emit("suiteEnd", module.suiteReport.end(true));
+ runLoggingCallbacks("moduleDone", {
+ name: module.name,
+ tests: module.tests,
+ failed: module.stats.bad,
+ passed: module.stats.all - module.stats.bad,
+ total: module.stats.all,
+ runtime: now() - module.stats.started
+ });
+ }
+ },
+
+ preserveTestEnvironment: function preserveTestEnvironment() {
+ if (this.preserveEnvironment) {
+ this.module.testEnvironment = this.testEnvironment;
+ this.testEnvironment = extend({}, this.module.testEnvironment);
+ }
+ },
+
+ queue: function queue() {
+ var test = this;
+
+ if (!this.valid()) {
+ return;
+ }
+
+ function runTest() {
+
+ // Each of these can by async
+ ProcessingQueue.addImmediate([function () {
+ test.before();
+ }, test.hooks("before"), function () {
+ test.preserveTestEnvironment();
+ }, test.hooks("beforeEach"), function () {
+ test.run();
+ }, test.hooks("afterEach").reverse(), test.hooks("after").reverse(), function () {
+ test.after();
+ }, function () {
+ test.finish();
+ }]);
+ }
+
+ var previousFailCount = config.storage && +config.storage.getItem("qunit-test-" + this.module.name + "-" + this.testName);
+
+ // Prioritize previously failed tests, detected from storage
+ var prioritize = config.reorder && !!previousFailCount;
+
+ this.previousFailure = !!previousFailCount;
+
+ ProcessingQueue.add(runTest, prioritize, config.seed);
+
+ // If the queue has already finished, we manually process the new test
+ if (ProcessingQueue.finished) {
+ ProcessingQueue.advance();
+ }
+ },
+
+
+ pushResult: function pushResult(resultInfo) {
+ if (this !== config.current) {
+ throw new Error("Assertion occurred after test had finished.");
+ }
+
+ // Destructure of resultInfo = { result, actual, expected, message, negative }
+ var source,
+ details = {
+ module: this.module.name,
+ name: this.testName,
+ result: resultInfo.result,
+ message: resultInfo.message,
+ actual: resultInfo.actual,
+ testId: this.testId,
+ negative: resultInfo.negative || false,
+ runtime: now() - this.started,
+ todo: !!this.todo
+ };
+
+ if (hasOwn.call(resultInfo, "expected")) {
+ details.expected = resultInfo.expected;
+ }
+
+ if (!resultInfo.result) {
+ source = resultInfo.source || sourceFromStacktrace();
+
+ if (source) {
+ details.source = source;
+ }
+ }
+
+ this.logAssertion(details);
+
+ this.assertions.push({
+ result: !!resultInfo.result,
+ message: resultInfo.message
+ });
+ },
+
+ pushFailure: function pushFailure(message, source, actual) {
+ if (!(this instanceof Test)) {
+ throw new Error("pushFailure() assertion outside test context, was " + sourceFromStacktrace(2));
+ }
+
+ this.pushResult({
+ result: false,
+ message: message || "error",
+ actual: actual || null,
+ source: source
+ });
+ },
+
+ /**
+ * Log assertion details using both the old QUnit.log interface and
+ * QUnit.on( "assertion" ) interface.
+ *
+ * @private
+ */
+ logAssertion: function logAssertion(details) {
+ runLoggingCallbacks("log", details);
+
+ var assertion = {
+ passed: details.result,
+ actual: details.actual,
+ expected: details.expected,
+ message: details.message,
+ stack: details.source,
+ todo: details.todo
+ };
+ this.testReport.pushAssertion(assertion);
+ emit("assertion", assertion);
+ },
+
+
+ resolvePromise: function resolvePromise(promise, phase) {
+ var then,
+ resume,
+ message,
+ test = this;
+ if (promise != null) {
+ then = promise.then;
+ if (objectType(then) === "function") {
+ resume = internalStop(test);
+ if (config.notrycatch) {
+ then.call(promise, function () {
+ resume();
+ });
+ } else {
+ then.call(promise, function () {
+ resume();
+ }, function (error) {
+ message = "Promise rejected " + (!phase ? "during" : phase.replace(/Each$/, "")) + " \"" + test.testName + "\": " + (error && error.message || error);
+ test.pushFailure(message, extractStacktrace(error, 0));
+
+ // Else next test will carry the responsibility
+ saveGlobal();
+
+ // Unblock
+ resume();
+ });
+ }
+ }
+ }
+ },
+
+ valid: function valid() {
+ var filter = config.filter,
+ regexFilter = /^(!?)\/([\w\W]*)\/(i?$)/.exec(filter),
+ module = config.module && config.module.toLowerCase(),
+ fullName = this.module.name + ": " + this.testName;
+
+ function moduleChainNameMatch(testModule) {
+ var testModuleName = testModule.name ? testModule.name.toLowerCase() : null;
+ if (testModuleName === module) {
+ return true;
+ } else if (testModule.parentModule) {
+ return moduleChainNameMatch(testModule.parentModule);
+ } else {
+ return false;
+ }
+ }
+
+ function moduleChainIdMatch(testModule) {
+ return inArray(testModule.moduleId, config.moduleId) || testModule.parentModule && moduleChainIdMatch(testModule.parentModule);
+ }
+
+ // Internally-generated tests are always valid
+ if (this.callback && this.callback.validTest) {
+ return true;
+ }
+
+ if (config.moduleId && config.moduleId.length > 0 && !moduleChainIdMatch(this.module)) {
+
+ return false;
+ }
+
+ if (config.testId && config.testId.length > 0 && !inArray(this.testId, config.testId)) {
+
+ return false;
+ }
+
+ if (module && !moduleChainNameMatch(this.module)) {
+ return false;
+ }
+
+ if (!filter) {
+ return true;
+ }
+
+ return regexFilter ? this.regexFilter(!!regexFilter[1], regexFilter[2], regexFilter[3], fullName) : this.stringFilter(filter, fullName);
+ },
+
+ regexFilter: function regexFilter(exclude, pattern, flags, fullName) {
+ var regex = new RegExp(pattern, flags);
+ var match = regex.test(fullName);
+
+ return match !== exclude;
+ },
+
+ stringFilter: function stringFilter(filter, fullName) {
+ filter = filter.toLowerCase();
+ fullName = fullName.toLowerCase();
+
+ var include = filter.charAt(0) !== "!";
+ if (!include) {
+ filter = filter.slice(1);
+ }
+
+ // If the filter matches, we need to honour include
+ if (fullName.indexOf(filter) !== -1) {
+ return include;
+ }
+
+ // Otherwise, do the opposite
+ return !include;
+ }
+ };
+
+ function pushFailure() {
+ if (!config.current) {
+ throw new Error("pushFailure() assertion outside test context, in " + sourceFromStacktrace(2));
+ }
+
+ // Gets current test obj
+ var currentTest = config.current;
+
+ return currentTest.pushFailure.apply(currentTest, arguments);
+ }
+
+ function saveGlobal() {
+ config.pollution = [];
+
+ if (config.noglobals) {
+ for (var key in global$1) {
+ if (hasOwn.call(global$1, key)) {
+
+ // In Opera sometimes DOM element ids show up here, ignore them
+ if (/^qunit-test-output/.test(key)) {
+ continue;
+ }
+ config.pollution.push(key);
+ }
+ }
+ }
+ }
+
+ function checkPollution() {
+ var newGlobals,
+ deletedGlobals,
+ old = config.pollution;
+
+ saveGlobal();
+
+ newGlobals = diff(config.pollution, old);
+ if (newGlobals.length > 0) {
+ pushFailure("Introduced global variable(s): " + newGlobals.join(", "));
+ }
+
+ deletedGlobals = diff(old, config.pollution);
+ if (deletedGlobals.length > 0) {
+ pushFailure("Deleted global variable(s): " + deletedGlobals.join(", "));
+ }
+ }
+
+ // Will be exposed as QUnit.test
+ function test(testName, callback) {
+ if (focused$1) {
+ return;
+ }
+
+ var newTest = new Test({
+ testName: testName,
+ callback: callback
+ });
+
+ newTest.queue();
+ }
+
+ function todo(testName, callback) {
+ if (focused$1) {
+ return;
+ }
+
+ var newTest = new Test({
+ testName: testName,
+ callback: callback,
+ todo: true
+ });
+
+ newTest.queue();
+ }
+
+ // Will be exposed as QUnit.skip
+ function skip(testName) {
+ if (focused$1) {
+ return;
+ }
+
+ var test = new Test({
+ testName: testName,
+ skip: true
+ });
+
+ test.queue();
+ }
+
+ // Will be exposed as QUnit.only
+ function only(testName, callback) {
+ if (focused$1) {
+ return;
+ }
+
+ config.queue.length = 0;
+ focused$1 = true;
+
+ var newTest = new Test({
+ testName: testName,
+ callback: callback
+ });
+
+ newTest.queue();
+ }
+
+ // Put a hold on processing and return a function that will release it.
+ function internalStop(test) {
+ test.semaphore += 1;
+ config.blocking = true;
+
+ // Set a recovery timeout, if so configured.
+ if (defined.setTimeout) {
+ var timeoutDuration = void 0;
+
+ if (typeof test.timeout === "number") {
+ timeoutDuration = test.timeout;
+ } else if (typeof config.testTimeout === "number") {
+ timeoutDuration = config.testTimeout;
+ }
+
+ if (typeof timeoutDuration === "number" && timeoutDuration > 0) {
+ clearTimeout(config.timeout);
+ config.timeout = setTimeout(function () {
+ pushFailure("Test took longer than " + timeoutDuration + "ms; test timed out.", sourceFromStacktrace(2));
+ internalRecover(test);
+ }, timeoutDuration);
+ }
+ }
+
+ var released = false;
+ return function resume() {
+ if (released) {
+ return;
+ }
+
+ released = true;
+ test.semaphore -= 1;
+ internalStart(test);
+ };
+ }
+
+ // Forcefully release all processing holds.
+ function internalRecover(test) {
+ test.semaphore = 0;
+ internalStart(test);
+ }
+
+ // Release a processing hold, scheduling a resumption attempt if no holds remain.
+ function internalStart(test) {
+
+ // If semaphore is non-numeric, throw error
+ if (isNaN(test.semaphore)) {
+ test.semaphore = 0;
+
+ pushFailure("Invalid value on test.semaphore", sourceFromStacktrace(2));
+ return;
+ }
+
+ // Don't start until equal number of stop-calls
+ if (test.semaphore > 0) {
+ return;
+ }
+
+ // Throw an Error if start is called more often than stop
+ if (test.semaphore < 0) {
+ test.semaphore = 0;
+
+ pushFailure("Tried to restart test while already started (test's semaphore was 0 already)", sourceFromStacktrace(2));
+ return;
+ }
+
+ // Add a slight delay to allow more assertions etc.
+ if (defined.setTimeout) {
+ if (config.timeout) {
+ clearTimeout(config.timeout);
+ }
+ config.timeout = setTimeout(function () {
+ if (test.semaphore > 0) {
+ return;
+ }
+
+ if (config.timeout) {
+ clearTimeout(config.timeout);
+ }
+
+ begin();
+ });
+ } else {
+ begin();
+ }
+ }
+
+ function collectTests(module) {
+ var tests = [].concat(module.tests);
+ var modules = [].concat(toConsumableArray(module.childModules));
+
+ // Do a breadth-first traversal of the child modules
+ while (modules.length) {
+ var nextModule = modules.shift();
+ tests.push.apply(tests, nextModule.tests);
+ modules.push.apply(modules, toConsumableArray(nextModule.childModules));
+ }
+
+ return tests;
+ }
+
+ function numberOfTests(module) {
+ return collectTests(module).length;
+ }
+
+ function numberOfUnskippedTests(module) {
+ return collectTests(module).filter(function (test) {
+ return !test.skip;
+ }).length;
+ }
+
+ function notifyTestsRan(module, skipped) {
+ module.testsRun++;
+ if (!skipped) {
+ module.unskippedTestsRun++;
+ }
+ while (module = module.parentModule) {
+ module.testsRun++;
+ if (!skipped) {
+ module.unskippedTestsRun++;
+ }
+ }
+ }
+
+ /**
+ * Returns a function that proxies to the given method name on the globals
+ * console object. The proxy will also detect if the console doesn't exist and
+ * will appropriately no-op. This allows support for IE9, which doesn't have a
+ * console if the developer tools are not open.
+ */
+ function consoleProxy(method) {
+ return function () {
+ if (console) {
+ console[method].apply(console, arguments);
+ }
+ };
+ }
+
+ var Logger = {
+ warn: consoleProxy("warn")
+ };
+
+ var Assert = function () {
+ function Assert(testContext) {
+ classCallCheck(this, Assert);
+
+ this.test = testContext;
+ }
+
+ // Assert helpers
+
+ createClass(Assert, [{
+ key: "timeout",
+ value: function timeout(duration) {
+ if (typeof duration !== "number") {
+ throw new Error("You must pass a number as the duration to assert.timeout");
+ }
+
+ this.test.timeout = duration;
+ }
+
+ // Documents a "step", which is a string value, in a test as a passing assertion
+
+ }, {
+ key: "step",
+ value: function step(message) {
+ var result = !!message;
+
+ this.test.steps.push(message);
+
+ return this.pushResult({
+ result: result,
+ message: message || "You must provide a message to assert.step"
+ });
+ }
+
+ // Verifies the steps in a test match a given array of string values
+
+ }, {
+ key: "verifySteps",
+ value: function verifySteps(steps, message) {
+ this.deepEqual(this.test.steps, steps, message);
+ this.test.steps.length = 0;
+ }
+
+ // Specify the number of expected assertions to guarantee that failed test
+ // (no assertions are run at all) don't slip through.
+
+ }, {
+ key: "expect",
+ value: function expect(asserts) {
+ if (arguments.length === 1) {
+ this.test.expected = asserts;
+ } else {
+ return this.test.expected;
+ }
+ }
+
+ // Put a hold on processing and return a function that will release it a maximum of once.
+
+ }, {
+ key: "async",
+ value: function async(count) {
+ var test$$1 = this.test;
+
+ var popped = false,
+ acceptCallCount = count;
+
+ if (typeof acceptCallCount === "undefined") {
+ acceptCallCount = 1;
+ }
+
+ var resume = internalStop(test$$1);
+
+ return function done() {
+ if (config.current !== test$$1) {
+ throw Error("assert.async callback called after test finished.");
+ }
+
+ if (popped) {
+ test$$1.pushFailure("Too many calls to the `assert.async` callback", sourceFromStacktrace(2));
+ return;
+ }
+
+ acceptCallCount -= 1;
+ if (acceptCallCount > 0) {
+ return;
+ }
+
+ popped = true;
+ resume();
+ };
+ }
+
+ // Exports test.push() to the user API
+ // Alias of pushResult.
+
+ }, {
+ key: "push",
+ value: function push(result, actual, expected, message, negative) {
+ Logger.warn("assert.push is deprecated and will be removed in QUnit 3.0." + " Please use assert.pushResult instead (https://api.qunitjs.com/assert/pushResult).");
+
+ var currentAssert = this instanceof Assert ? this : config.current.assert;
+ return currentAssert.pushResult({
+ result: result,
+ actual: actual,
+ expected: expected,
+ message: message,
+ negative: negative
+ });
+ }
+ }, {
+ key: "pushResult",
+ value: function pushResult(resultInfo) {
+
+ // Destructure of resultInfo = { result, actual, expected, message, negative }
+ var assert = this;
+ var currentTest = assert instanceof Assert && assert.test || config.current;
+
+ // Backwards compatibility fix.
+ // Allows the direct use of global exported assertions and QUnit.assert.*
+ // Although, it's use is not recommended as it can leak assertions
+ // to other tests from async tests, because we only get a reference to the current test,
+ // not exactly the test where assertion were intended to be called.
+ if (!currentTest) {
+ throw new Error("assertion outside test context, in " + sourceFromStacktrace(2));
+ }
+
+ if (!(assert instanceof Assert)) {
+ assert = currentTest.assert;
+ }
+
+ return assert.test.pushResult(resultInfo);
+ }
+ }, {
+ key: "ok",
+ value: function ok(result, message) {
+ if (!message) {
+ message = result ? "okay" : "failed, expected argument to be truthy, was: " + dump.parse(result);
+ }
+
+ this.pushResult({
+ result: !!result,
+ actual: result,
+ expected: true,
+ message: message
+ });
+ }
+ }, {
+ key: "notOk",
+ value: function notOk(result, message) {
+ if (!message) {
+ message = !result ? "okay" : "failed, expected argument to be falsy, was: " + dump.parse(result);
+ }
+
+ this.pushResult({
+ result: !result,
+ actual: result,
+ expected: false,
+ message: message
+ });
+ }
+ }, {
+ key: "equal",
+ value: function equal(actual, expected, message) {
+
+ // eslint-disable-next-line eqeqeq
+ var result = expected == actual;
+
+ this.pushResult({
+ result: result,
+ actual: actual,
+ expected: expected,
+ message: message
+ });
+ }
+ }, {
+ key: "notEqual",
+ value: function notEqual(actual, expected, message) {
+
+ // eslint-disable-next-line eqeqeq
+ var result = expected != actual;
+
+ this.pushResult({
+ result: result,
+ actual: actual,
+ expected: expected,
+ message: message,
+ negative: true
+ });
+ }
+ }, {
+ key: "propEqual",
+ value: function propEqual(actual, expected, message) {
+ actual = objectValues(actual);
+ expected = objectValues(expected);
+
+ this.pushResult({
+ result: equiv(actual, expected),
+ actual: actual,
+ expected: expected,
+ message: message
+ });
+ }
+ }, {
+ key: "notPropEqual",
+ value: function notPropEqual(actual, expected, message) {
+ actual = objectValues(actual);
+ expected = objectValues(expected);
+
+ this.pushResult({
+ result: !equiv(actual, expected),
+ actual: actual,
+ expected: expected,
+ message: message,
+ negative: true
+ });
+ }
+ }, {
+ key: "deepEqual",
+ value: function deepEqual(actual, expected, message) {
+ this.pushResult({
+ result: equiv(actual, expected),
+ actual: actual,
+ expected: expected,
+ message: message
+ });
+ }
+ }, {
+ key: "notDeepEqual",
+ value: function notDeepEqual(actual, expected, message) {
+ this.pushResult({
+ result: !equiv(actual, expected),
+ actual: actual,
+ expected: expected,
+ message: message,
+ negative: true
+ });
+ }
+ }, {
+ key: "strictEqual",
+ value: function strictEqual(actual, expected, message) {
+ this.pushResult({
+ result: expected === actual,
+ actual: actual,
+ expected: expected,
+ message: message
+ });
+ }
+ }, {
+ key: "notStrictEqual",
+ value: function notStrictEqual(actual, expected, message) {
+ this.pushResult({
+ result: expected !== actual,
+ actual: actual,
+ expected: expected,
+ message: message,
+ negative: true
+ });
+ }
+ }, {
+ key: "throws",
+ value: function throws(block, expected, message) {
+ var actual = void 0,
+ result = false;
+
+ var currentTest = this instanceof Assert && this.test || config.current;
+
+ // 'expected' is optional unless doing string comparison
+ if (objectType(expected) === "string") {
+ if (message == null) {
+ message = expected;
+ expected = null;
+ } else {
+ throw new Error("throws/raises does not accept a string value for the expected argument.\n" + "Use a non-string object value (e.g. regExp) instead if it's necessary.");
+ }
+ }
+
+ currentTest.ignoreGlobalErrors = true;
+ try {
+ block.call(currentTest.testEnvironment);
+ } catch (e) {
+ actual = e;
+ }
+ currentTest.ignoreGlobalErrors = false;
+
+ if (actual) {
+ var expectedType = objectType(expected);
+
+ // We don't want to validate thrown error
+ if (!expected) {
+ result = true;
+ expected = null;
+
+ // Expected is a regexp
+ } else if (expectedType === "regexp") {
+ result = expected.test(errorString(actual));
+
+ // Expected is a constructor, maybe an Error constructor
+ } else if (expectedType === "function" && actual instanceof expected) {
+ result = true;
+
+ // Expected is an Error object
+ } else if (expectedType === "object") {
+ result = actual instanceof expected.constructor && actual.name === expected.name && actual.message === expected.message;
+
+ // Expected is a validation function which returns true if validation passed
+ } else if (expectedType === "function" && expected.call({}, actual) === true) {
+ expected = null;
+ result = true;
+ }
+ }
+
+ currentTest.assert.pushResult({
+ result: result,
+ actual: actual,
+ expected: expected,
+ message: message
+ });
+ }
+ }, {
+ key: "rejects",
+ value: function rejects(promise, expected, message) {
+ var result = false;
+
+ var currentTest = this instanceof Assert && this.test || config.current;
+
+ // 'expected' is optional unless doing string comparison
+ if (objectType(expected) === "string") {
+ if (message === undefined) {
+ message = expected;
+ expected = undefined;
+ } else {
+ message = "assert.rejects does not accept a string value for the expected " + "argument.\nUse a non-string object value (e.g. validator function) instead " + "if necessary.";
+
+ currentTest.assert.pushResult({
+ result: false,
+ message: message
+ });
+
+ return;
+ }
+ }
+
+ var then = promise && promise.then;
+ if (objectType(then) !== "function") {
+ var _message = "The value provided to `assert.rejects` in " + "\"" + currentTest.testName + "\" was not a promise.";
+
+ currentTest.assert.pushResult({
+ result: false,
+ message: _message,
+ actual: promise
+ });
+
+ return;
+ }
+
+ var done = this.async();
+
+ return then.call(promise, function handleFulfillment() {
+ var message = "The promise returned by the `assert.rejects` callback in " + "\"" + currentTest.testName + "\" did not reject.";
+
+ currentTest.assert.pushResult({
+ result: false,
+ message: message,
+ actual: promise
+ });
+
+ done();
+ }, function handleRejection(actual) {
+ if (actual) {
+ var expectedType = objectType(expected);
+
+ // We don't want to validate
+ if (expected === undefined) {
+ result = true;
+ expected = null;
+
+ // Expected is a regexp
+ } else if (expectedType === "regexp") {
+ result = expected.test(errorString(actual));
+
+ // Expected is a constructor, maybe an Error constructor
+ } else if (expectedType === "function" && actual instanceof expected) {
+ result = true;
+
+ // Expected is an Error object
+ } else if (expectedType === "object") {
+ result = actual instanceof expected.constructor && actual.name === expected.name && actual.message === expected.message;
+
+ // Expected is a validation function which returns true if validation passed
+ } else {
+ if (expectedType === "function") {
+ result = expected.call({}, actual) === true;
+ expected = null;
+
+ // Expected is some other invalid type
+ } else {
+ result = false;
+ message = "invalid expected value provided to `assert.rejects` " + "callback in \"" + currentTest.testName + "\": " + expectedType + ".";
+ }
+ }
+ }
+
+ currentTest.assert.pushResult({
+ result: result,
+ actual: actual,
+ expected: expected,
+ message: message
+ });
+
+ done();
+ });
+ }
+ }]);
+ return Assert;
+ }();
+
+ // Provide an alternative to assert.throws(), for environments that consider throws a reserved word
+ // Known to us are: Closure Compiler, Narwhal
+ // eslint-disable-next-line dot-notation
+
+
+ Assert.prototype.raises = Assert.prototype["throws"];
+
+ /**
+ * Converts an error into a simple string for comparisons.
+ *
+ * @param {Error} error
+ * @return {String}
+ */
+ function errorString(error) {
+ var resultErrorString = error.toString();
+
+ if (resultErrorString.substring(0, 7) === "[object") {
+ var name = error.name ? error.name.toString() : "Error";
+ var message = error.message ? error.message.toString() : "";
+
+ if (name && message) {
+ return name + ": " + message;
+ } else if (name) {
+ return name;
+ } else if (message) {
+ return message;
+ } else {
+ return "Error";
+ }
+ } else {
+ return resultErrorString;
+ }
+ }
+
+ /* global module, exports, define */
+ function exportQUnit(QUnit) {
+
+ if (defined.document) {
+
+ // QUnit may be defined when it is preconfigured but then only QUnit and QUnit.config may be defined.
+ if (window.QUnit && window.QUnit.version) {
+ throw new Error("QUnit has already been defined.");
+ }
+
+ window.QUnit = QUnit;
+ }
+
+ // For nodejs
+ if (typeof module !== "undefined" && module && module.exports) {
+ module.exports = QUnit;
+
+ // For consistency with CommonJS environments' exports
+ module.exports.QUnit = QUnit;
+ }
+
+ // For CommonJS with exports, but without module.exports, like Rhino
+ if (typeof exports !== "undefined" && exports) {
+ exports.QUnit = QUnit;
+ }
+
+ if (typeof define === "function" && define.amd) {
+ define(function () {
+ return QUnit;
+ });
+ QUnit.config.autostart = false;
+ }
+
+ // For Web/Service Workers
+ if (self$1 && self$1.WorkerGlobalScope && self$1 instanceof self$1.WorkerGlobalScope) {
+ self$1.QUnit = QUnit;
+ }
+ }
+
+ var SuiteReport = function () {
+ function SuiteReport(name, parentSuite) {
+ classCallCheck(this, SuiteReport);
+
+ this.name = name;
+ this.fullName = parentSuite ? parentSuite.fullName.concat(name) : [];
+
+ this.tests = [];
+ this.childSuites = [];
+
+ if (parentSuite) {
+ parentSuite.pushChildSuite(this);
+ }
+ }
+
+ createClass(SuiteReport, [{
+ key: "start",
+ value: function start(recordTime) {
+ if (recordTime) {
+ this._startTime = Date.now();
+ }
+
+ return {
+ name: this.name,
+ fullName: this.fullName.slice(),
+ tests: this.tests.map(function (test) {
+ return test.start();
+ }),
+ childSuites: this.childSuites.map(function (suite) {
+ return suite.start();
+ }),
+ testCounts: {
+ total: this.getTestCounts().total
+ }
+ };
+ }
+ }, {
+ key: "end",
+ value: function end(recordTime) {
+ if (recordTime) {
+ this._endTime = Date.now();
+ }
+
+ return {
+ name: this.name,
+ fullName: this.fullName.slice(),
+ tests: this.tests.map(function (test) {
+ return test.end();
+ }),
+ childSuites: this.childSuites.map(function (suite) {
+ return suite.end();
+ }),
+ testCounts: this.getTestCounts(),
+ runtime: this.getRuntime(),
+ status: this.getStatus()
+ };
+ }
+ }, {
+ key: "pushChildSuite",
+ value: function pushChildSuite(suite) {
+ this.childSuites.push(suite);
+ }
+ }, {
+ key: "pushTest",
+ value: function pushTest(test) {
+ this.tests.push(test);
+ }
+ }, {
+ key: "getRuntime",
+ value: function getRuntime() {
+ return this._endTime - this._startTime;
+ }
+ }, {
+ key: "getTestCounts",
+ value: function getTestCounts() {
+ var counts = arguments.length > 0 && arguments[0] !== undefined ? arguments[0] : { passed: 0, failed: 0, skipped: 0, todo: 0, total: 0 };
+
+ counts = this.tests.reduce(function (counts, test) {
+ if (test.valid) {
+ counts[test.getStatus()]++;
+ counts.total++;
+ }
+
+ return counts;
+ }, counts);
+
+ return this.childSuites.reduce(function (counts, suite) {
+ return suite.getTestCounts(counts);
+ }, counts);
+ }
+ }, {
+ key: "getStatus",
+ value: function getStatus() {
+ var _getTestCounts = this.getTestCounts(),
+ total = _getTestCounts.total,
+ failed = _getTestCounts.failed,
+ skipped = _getTestCounts.skipped,
+ todo = _getTestCounts.todo;
+
+ if (failed) {
+ return "failed";
+ } else {
+ if (skipped === total) {
+ return "skipped";
+ } else if (todo === total) {
+ return "todo";
+ } else {
+ return "passed";
+ }
+ }
+ }
+ }]);
+ return SuiteReport;
+ }();
+
+ // Handle an unhandled exception. By convention, returns true if further
+ // error handling should be suppressed and false otherwise.
+ // In this case, we will only suppress further error handling if the
+ // "ignoreGlobalErrors" configuration option is enabled.
+ function onError(error) {
+ for (var _len = arguments.length, args = Array(_len > 1 ? _len - 1 : 0), _key = 1; _key < _len; _key++) {
+ args[_key - 1] = arguments[_key];
+ }
+
+ if (config.current) {
+ if (config.current.ignoreGlobalErrors) {
+ return true;
+ }
+ pushFailure.apply(undefined, [error.message, error.fileName + ":" + error.lineNumber].concat(args));
+ } else {
+ test("global failure", extend(function () {
+ pushFailure.apply(undefined, [error.message, error.fileName + ":" + error.lineNumber].concat(args));
+ }, { validTest: true }));
+ }
+
+ return false;
+ }
+
+ // Handle an unhandled rejection
+ function onUnhandledRejection(reason) {
+ var resultInfo = {
+ result: false,
+ message: reason.message || "error",
+ actual: reason,
+ source: reason.stack || sourceFromStacktrace(3)
+ };
+
+ var currentTest = config.current;
+ if (currentTest) {
+ currentTest.assert.pushResult(resultInfo);
+ } else {
+ test("global failure", extend(function (assert) {
+ assert.pushResult(resultInfo);
+ }, { validTest: true }));
+ }
+ }
+
+ var focused = false;
+ var QUnit = {};
+ var globalSuite = new SuiteReport();
+
+ // The initial "currentModule" represents the global (or top-level) module that
+ // is not explicitly defined by the user, therefore we add the "globalSuite" to
+ // it since each module has a suiteReport associated with it.
+ config.currentModule.suiteReport = globalSuite;
+
+ var moduleStack = [];
+ var globalStartCalled = false;
+ var runStarted = false;
+
+ // Figure out if we're running the tests from a server or not
+ QUnit.isLocal = !(defined.document && window.location.protocol !== "file:");
+
+ // Expose the current QUnit version
+ QUnit.version = "2.5.0";
+
+ function createModule(name, testEnvironment, modifiers) {
+ var parentModule = moduleStack.length ? moduleStack.slice(-1)[0] : null;
+ var moduleName = parentModule !== null ? [parentModule.name, name].join(" > ") : name;
+ var parentSuite = parentModule ? parentModule.suiteReport : globalSuite;
+
+ var skip$$1 = parentModule !== null && parentModule.skip || modifiers.skip;
+ var todo$$1 = parentModule !== null && parentModule.todo || modifiers.todo;
+
+ var module = {
+ name: moduleName,
+ parentModule: parentModule,
+ tests: [],
+ moduleId: generateHash(moduleName),
+ testsRun: 0,
+ unskippedTestsRun: 0,
+ childModules: [],
+ suiteReport: new SuiteReport(name, parentSuite),
+
+ // Pass along `skip` and `todo` properties from parent module, in case
+ // there is one, to childs. And use own otherwise.
+ // This property will be used to mark own tests and tests of child suites
+ // as either `skipped` or `todo`.
+ skip: skip$$1,
+ todo: skip$$1 ? false : todo$$1
+ };
+
+ var env = {};
+ if (parentModule) {
+ parentModule.childModules.push(module);
+ extend(env, parentModule.testEnvironment);
+ }
+ extend(env, testEnvironment);
+ module.testEnvironment = env;
+
+ config.modules.push(module);
+ return module;
+ }
+
+ function processModule(name, options, executeNow) {
+ var modifiers = arguments.length > 3 && arguments[3] !== undefined ? arguments[3] : {};
+
+ var module = createModule(name, options, modifiers);
+
+ // Move any hooks to a 'hooks' object
+ var testEnvironment = module.testEnvironment;
+ var hooks = module.hooks = {};
+
+ setHookFromEnvironment(hooks, testEnvironment, "before");
+ setHookFromEnvironment(hooks, testEnvironment, "beforeEach");
+ setHookFromEnvironment(hooks, testEnvironment, "afterEach");
+ setHookFromEnvironment(hooks, testEnvironment, "after");
+
+ function setHookFromEnvironment(hooks, environment, name) {
+ var potentialHook = environment[name];
+ hooks[name] = typeof potentialHook === "function" ? [potentialHook] : [];
+ delete environment[name];
+ }
+
+ var moduleFns = {
+ before: setHookFunction(module, "before"),
+ beforeEach: setHookFunction(module, "beforeEach"),
+ afterEach: setHookFunction(module, "afterEach"),
+ after: setHookFunction(module, "after")
+ };
+
+ var currentModule = config.currentModule;
+ if (objectType(executeNow) === "function") {
+ moduleStack.push(module);
+ config.currentModule = module;
+ executeNow.call(module.testEnvironment, moduleFns);
+ moduleStack.pop();
+ module = module.parentModule || currentModule;
+ }
+
+ config.currentModule = module;
+ }
+
+ // TODO: extract this to a new file alongside its related functions
+ function module$1(name, options, executeNow) {
+ if (focused) {
+ return;
+ }
+
+ if (arguments.length === 2) {
+ if (objectType(options) === "function") {
+ executeNow = options;
+ options = undefined;
+ }
+ }
+
+ processModule(name, options, executeNow);
+ }
+
+ module$1.only = function () {
+ if (focused) {
+ return;
+ }
+
+ config.modules.length = 0;
+ config.queue.length = 0;
+
+ module$1.apply(undefined, arguments);
+
+ focused = true;
+ };
+
+ module$1.skip = function (name, options, executeNow) {
+ if (focused) {
+ return;
+ }
+
+ if (arguments.length === 2) {
+ if (objectType(options) === "function") {
+ executeNow = options;
+ options = undefined;
+ }
+ }
+
+ processModule(name, options, executeNow, { skip: true });
+ };
+
+ module$1.todo = function (name, options, executeNow) {
+ if (focused) {
+ return;
+ }
+
+ if (arguments.length === 2) {
+ if (objectType(options) === "function") {
+ executeNow = options;
+ options = undefined;
+ }
+ }
+
+ processModule(name, options, executeNow, { todo: true });
+ };
+
+ extend(QUnit, {
+ on: on,
+
+ module: module$1,
+
+ test: test,
+
+ todo: todo,
+
+ skip: skip,
+
+ only: only,
+
+ start: function start(count) {
+ var globalStartAlreadyCalled = globalStartCalled;
+
+ if (!config.current) {
+ globalStartCalled = true;
+
+ if (runStarted) {
+ throw new Error("Called start() while test already started running");
+ } else if (globalStartAlreadyCalled || count > 1) {
+ throw new Error("Called start() outside of a test context too many times");
+ } else if (config.autostart) {
+ throw new Error("Called start() outside of a test context when " + "QUnit.config.autostart was true");
+ } else if (!config.pageLoaded) {
+
+ // The page isn't completely loaded yet, so we set autostart and then
+ // load if we're in Node or wait for the browser's load event.
+ config.autostart = true;
+
+ // Starts from Node even if .load was not previously called. We still return
+ // early otherwise we'll wind up "beginning" twice.
+ if (!defined.document) {
+ QUnit.load();
+ }
+
+ return;
+ }
+ } else {
+ throw new Error("QUnit.start cannot be called inside a test context.");
+ }
+
+ scheduleBegin();
+ },
+
+ config: config,
+
+ is: is,
+
+ objectType: objectType,
+
+ extend: extend,
+
+ load: function load() {
+ config.pageLoaded = true;
+
+ // Initialize the configuration options
+ extend(config, {
+ stats: { all: 0, bad: 0 },
+ started: 0,
+ updateRate: 1000,
+ autostart: true,
+ filter: ""
+ }, true);
+
+ if (!runStarted) {
+ config.blocking = false;
+
+ if (config.autostart) {
+ scheduleBegin();
+ }
+ }
+ },
+
+ stack: function stack(offset) {
+ offset = (offset || 0) + 2;
+ return sourceFromStacktrace(offset);
+ },
+
+ onError: onError,
+
+ onUnhandledRejection: onUnhandledRejection
+ });
+
+ QUnit.pushFailure = pushFailure;
+ QUnit.assert = Assert.prototype;
+ QUnit.equiv = equiv;
+ QUnit.dump = dump;
+
+ registerLoggingCallbacks(QUnit);
+
+ function scheduleBegin() {
+
+ runStarted = true;
+
+ // Add a slight delay to allow definition of more modules and tests.
+ if (defined.setTimeout) {
+ setTimeout(function () {
+ begin();
+ });
+ } else {
+ begin();
+ }
+ }
+
+ function begin() {
+ var i,
+ l,
+ modulesLog = [];
+
+ // If the test run hasn't officially begun yet
+ if (!config.started) {
+
+ // Record the time of the test run's beginning
+ config.started = now();
+
+ // Delete the loose unnamed module if unused.
+ if (config.modules[0].name === "" && config.modules[0].tests.length === 0) {
+ config.modules.shift();
+ }
+
+ // Avoid unnecessary information by not logging modules' test environments
+ for (i = 0, l = config.modules.length; i < l; i++) {
+ modulesLog.push({
+ name: config.modules[i].name,
+ tests: config.modules[i].tests
+ });
+ }
+
+ // The test run is officially beginning now
+ emit("runStart", globalSuite.start(true));
+ runLoggingCallbacks("begin", {
+ totalTests: Test.count,
+ modules: modulesLog
+ });
+ }
+
+ config.blocking = false;
+ ProcessingQueue.advance();
+ }
+
+ function setHookFunction(module, hookName) {
+ return function setHook(callback) {
+ module.hooks[hookName].push(callback);
+ };
+ }
+
+ exportQUnit(QUnit);
+
+ (function () {
+
+ if (typeof window === "undefined" || typeof document === "undefined") {
+ return;
+ }
+
+ var config = QUnit.config,
+ hasOwn = Object.prototype.hasOwnProperty;
+
+ // Stores fixture HTML for resetting later
+ function storeFixture() {
+
+ // Avoid overwriting user-defined values
+ if (hasOwn.call(config, "fixture")) {
+ return;
+ }
+
+ var fixture = document.getElementById("qunit-fixture");
+ if (fixture) {
+ config.fixture = fixture.innerHTML;
+ }
+ }
+
+ QUnit.begin(storeFixture);
+
+ // Resets the fixture DOM element if available.
+ function resetFixture() {
+ if (config.fixture == null) {
+ return;
+ }
+
+ var fixture = document.getElementById("qunit-fixture");
+ if (fixture) {
+ fixture.innerHTML = config.fixture;
+ }
+ }
+
+ QUnit.testStart(resetFixture);
+ })();
+
+ (function () {
+
+ // Only interact with URLs via window.location
+ var location = typeof window !== "undefined" && window.location;
+ if (!location) {
+ return;
+ }
+
+ var urlParams = getUrlParams();
+
+ QUnit.urlParams = urlParams;
+
+ // Match module/test by inclusion in an array
+ QUnit.config.moduleId = [].concat(urlParams.moduleId || []);
+ QUnit.config.testId = [].concat(urlParams.testId || []);
+
+ // Exact case-insensitive match of the module name
+ QUnit.config.module = urlParams.module;
+
+ // Regular expression or case-insenstive substring match against "moduleName: testName"
+ QUnit.config.filter = urlParams.filter;
+
+ // Test order randomization
+ if (urlParams.seed === true) {
+
+ // Generate a random seed if the option is specified without a value
+ QUnit.config.seed = Math.random().toString(36).slice(2);
+ } else if (urlParams.seed) {
+ QUnit.config.seed = urlParams.seed;
+ }
+
+ // Add URL-parameter-mapped config values with UI form rendering data
+ QUnit.config.urlConfig.push({
+ id: "hidepassed",
+ label: "Hide passed tests",
+ tooltip: "Only show tests and assertions that fail. Stored as query-strings."
+ }, {
+ id: "noglobals",
+ label: "Check for Globals",
+ tooltip: "Enabling this will test if any test introduces new properties on the " + "global object (`window` in Browsers). Stored as query-strings."
+ }, {
+ id: "notrycatch",
+ label: "No try-catch",
+ tooltip: "Enabling this will run tests outside of a try-catch block. Makes debugging " + "exceptions in IE reasonable. Stored as query-strings."
+ });
+
+ QUnit.begin(function () {
+ var i,
+ option,
+ urlConfig = QUnit.config.urlConfig;
+
+ for (i = 0; i < urlConfig.length; i++) {
+
+ // Options can be either strings or objects with nonempty "id" properties
+ option = QUnit.config.urlConfig[i];
+ if (typeof option !== "string") {
+ option = option.id;
+ }
+
+ if (QUnit.config[option] === undefined) {
+ QUnit.config[option] = urlParams[option];
+ }
+ }
+ });
+
+ function getUrlParams() {
+ var i, param, name, value;
+ var urlParams = Object.create(null);
+ var params = location.search.slice(1).split("&");
+ var length = params.length;
+
+ for (i = 0; i < length; i++) {
+ if (params[i]) {
+ param = params[i].split("=");
+ name = decodeQueryParam(param[0]);
+
+ // Allow just a key to turn on a flag, e.g., test.html?noglobals
+ value = param.length === 1 || decodeQueryParam(param.slice(1).join("="));
+ if (name in urlParams) {
+ urlParams[name] = [].concat(urlParams[name], value);
+ } else {
+ urlParams[name] = value;
+ }
+ }
+ }
+
+ return urlParams;
+ }
+
+ function decodeQueryParam(param) {
+ return decodeURIComponent(param.replace(/\+/g, "%20"));
+ }
+ })();
+
+ var stats = {
+ passedTests: 0,
+ failedTests: 0,
+ skippedTests: 0,
+ todoTests: 0
+ };
+
+ // Escape text for attribute or text content.
+ function escapeText(s) {
+ if (!s) {
+ return "";
+ }
+ s = s + "";
+
+ // Both single quotes and double quotes (for attributes)
+ return s.replace(/['"<>&]/g, function (s) {
+ switch (s) {
+ case "'":
+ return "'";
+ case "\"":
+ return """;
+ case "<":
+ return "<";
+ case ">":
+ return ">";
+ case "&":
+ return "&";
+ }
+ });
+ }
+
+ (function () {
+
+ // Don't load the HTML Reporter on non-browser environments
+ if (typeof window === "undefined" || !window.document) {
+ return;
+ }
+
+ var config = QUnit.config,
+ document$$1 = window.document,
+ collapseNext = false,
+ hasOwn = Object.prototype.hasOwnProperty,
+ unfilteredUrl = setUrl({ filter: undefined, module: undefined,
+ moduleId: undefined, testId: undefined }),
+ modulesList = [];
+
+ function addEvent(elem, type, fn) {
+ elem.addEventListener(type, fn, false);
+ }
+
+ function removeEvent(elem, type, fn) {
+ elem.removeEventListener(type, fn, false);
+ }
+
+ function addEvents(elems, type, fn) {
+ var i = elems.length;
+ while (i--) {
+ addEvent(elems[i], type, fn);
+ }
+ }
+
+ function hasClass(elem, name) {
+ return (" " + elem.className + " ").indexOf(" " + name + " ") >= 0;
+ }
+
+ function addClass(elem, name) {
+ if (!hasClass(elem, name)) {
+ elem.className += (elem.className ? " " : "") + name;
+ }
+ }
+
+ function toggleClass(elem, name, force) {
+ if (force || typeof force === "undefined" && !hasClass(elem, name)) {
+ addClass(elem, name);
+ } else {
+ removeClass(elem, name);
+ }
+ }
+
+ function removeClass(elem, name) {
+ var set = " " + elem.className + " ";
+
+ // Class name may appear multiple times
+ while (set.indexOf(" " + name + " ") >= 0) {
+ set = set.replace(" " + name + " ", " ");
+ }
+
+ // Trim for prettiness
+ elem.className = typeof set.trim === "function" ? set.trim() : set.replace(/^\s+|\s+$/g, "");
+ }
+
+ function id(name) {
+ return document$$1.getElementById && document$$1.getElementById(name);
+ }
+
+ function abortTests() {
+ var abortButton = id("qunit-abort-tests-button");
+ if (abortButton) {
+ abortButton.disabled = true;
+ abortButton.innerHTML = "Aborting...";
+ }
+ QUnit.config.queue.length = 0;
+ return false;
+ }
+
+ function interceptNavigation(ev) {
+ applyUrlParams();
+
+ if (ev && ev.preventDefault) {
+ ev.preventDefault();
+ }
+
+ return false;
+ }
+
+ function getUrlConfigHtml() {
+ var i,
+ j,
+ val,
+ escaped,
+ escapedTooltip,
+ selection = false,
+ urlConfig = config.urlConfig,
+ urlConfigHtml = "";
+
+ for (i = 0; i < urlConfig.length; i++) {
+
+ // Options can be either strings or objects with nonempty "id" properties
+ val = config.urlConfig[i];
+ if (typeof val === "string") {
+ val = {
+ id: val,
+ label: val
+ };
+ }
+
+ escaped = escapeText(val.id);
+ escapedTooltip = escapeText(val.tooltip);
+
+ if (!val.value || typeof val.value === "string") {
+ urlConfigHtml += "";
+ } else {
+ urlConfigHtml += "";
+ }
+ }
+
+ return urlConfigHtml;
+ }
+
+ // Handle "click" events on toolbar checkboxes and "change" for select menus.
+ // Updates the URL with the new state of `config.urlConfig` values.
+ function toolbarChanged() {
+ var updatedUrl,
+ value,
+ tests,
+ field = this,
+ params = {};
+
+ // Detect if field is a select menu or a checkbox
+ if ("selectedIndex" in field) {
+ value = field.options[field.selectedIndex].value || undefined;
+ } else {
+ value = field.checked ? field.defaultValue || true : undefined;
+ }
+
+ params[field.name] = value;
+ updatedUrl = setUrl(params);
+
+ // Check if we can apply the change without a page refresh
+ if ("hidepassed" === field.name && "replaceState" in window.history) {
+ QUnit.urlParams[field.name] = value;
+ config[field.name] = value || false;
+ tests = id("qunit-tests");
+ if (tests) {
+ toggleClass(tests, "hidepass", value || false);
+ }
+ window.history.replaceState(null, "", updatedUrl);
+ } else {
+ window.location = updatedUrl;
+ }
+ }
+
+ function setUrl(params) {
+ var key,
+ arrValue,
+ i,
+ querystring = "?",
+ location = window.location;
+
+ params = QUnit.extend(QUnit.extend({}, QUnit.urlParams), params);
+
+ for (key in params) {
+
+ // Skip inherited or undefined properties
+ if (hasOwn.call(params, key) && params[key] !== undefined) {
+
+ // Output a parameter for each value of this key
+ // (but usually just one)
+ arrValue = [].concat(params[key]);
+ for (i = 0; i < arrValue.length; i++) {
+ querystring += encodeURIComponent(key);
+ if (arrValue[i] !== true) {
+ querystring += "=" + encodeURIComponent(arrValue[i]);
+ }
+ querystring += "&";
+ }
+ }
+ }
+ return location.protocol + "//" + location.host + location.pathname + querystring.slice(0, -1);
+ }
+
+ function applyUrlParams() {
+ var i,
+ selectedModules = [],
+ modulesList = id("qunit-modulefilter-dropdown-list").getElementsByTagName("input"),
+ filter = id("qunit-filter-input").value;
+
+ for (i = 0; i < modulesList.length; i++) {
+ if (modulesList[i].checked) {
+ selectedModules.push(modulesList[i].value);
+ }
+ }
+
+ window.location = setUrl({
+ filter: filter === "" ? undefined : filter,
+ moduleId: selectedModules.length === 0 ? undefined : selectedModules,
+
+ // Remove module and testId filter
+ module: undefined,
+ testId: undefined
+ });
+ }
+
+ function toolbarUrlConfigContainer() {
+ var urlConfigContainer = document$$1.createElement("span");
+
+ urlConfigContainer.innerHTML = getUrlConfigHtml();
+ addClass(urlConfigContainer, "qunit-url-config");
+
+ addEvents(urlConfigContainer.getElementsByTagName("input"), "change", toolbarChanged);
+ addEvents(urlConfigContainer.getElementsByTagName("select"), "change", toolbarChanged);
+
+ return urlConfigContainer;
+ }
+
+ function abortTestsButton() {
+ var button = document$$1.createElement("button");
+ button.id = "qunit-abort-tests-button";
+ button.innerHTML = "Abort";
+ addEvent(button, "click", abortTests);
+ return button;
+ }
+
+ function toolbarLooseFilter() {
+ var filter = document$$1.createElement("form"),
+ label = document$$1.createElement("label"),
+ input = document$$1.createElement("input"),
+ button = document$$1.createElement("button");
+
+ addClass(filter, "qunit-filter");
+
+ label.innerHTML = "Filter: ";
+
+ input.type = "text";
+ input.value = config.filter || "";
+ input.name = "filter";
+ input.id = "qunit-filter-input";
+
+ button.innerHTML = "Go";
+
+ label.appendChild(input);
+
+ filter.appendChild(label);
+ filter.appendChild(document$$1.createTextNode(" "));
+ filter.appendChild(button);
+ addEvent(filter, "submit", interceptNavigation);
+
+ return filter;
+ }
+
+ function moduleListHtml() {
+ var i,
+ checked,
+ html = "";
+
+ for (i = 0; i < config.modules.length; i++) {
+ if (config.modules[i].name !== "") {
+ checked = config.moduleId.indexOf(config.modules[i].moduleId) > -1;
+ html += "";
+ }
+ }
+
+ return html;
+ }
+
+ function toolbarModuleFilter() {
+ var allCheckbox,
+ commit,
+ reset,
+ moduleFilter = document$$1.createElement("form"),
+ label = document$$1.createElement("label"),
+ moduleSearch = document$$1.createElement("input"),
+ dropDown = document$$1.createElement("div"),
+ actions = document$$1.createElement("span"),
+ dropDownList = document$$1.createElement("ul"),
+ dirty = false;
+
+ moduleSearch.id = "qunit-modulefilter-search";
+ addEvent(moduleSearch, "input", searchInput);
+ addEvent(moduleSearch, "input", searchFocus);
+ addEvent(moduleSearch, "focus", searchFocus);
+ addEvent(moduleSearch, "click", searchFocus);
+
+ label.id = "qunit-modulefilter-search-container";
+ label.innerHTML = "Module: ";
+ label.appendChild(moduleSearch);
+
+ actions.id = "qunit-modulefilter-actions";
+ actions.innerHTML = "" + "" + "";
+ allCheckbox = actions.lastChild.firstChild;
+ commit = actions.firstChild;
+ reset = commit.nextSibling;
+ addEvent(commit, "click", applyUrlParams);
+
+ dropDownList.id = "qunit-modulefilter-dropdown-list";
+ dropDownList.innerHTML = moduleListHtml();
+
+ dropDown.id = "qunit-modulefilter-dropdown";
+ dropDown.style.display = "none";
+ dropDown.appendChild(actions);
+ dropDown.appendChild(dropDownList);
+ addEvent(dropDown, "change", selectionChange);
+ selectionChange();
+
+ moduleFilter.id = "qunit-modulefilter";
+ moduleFilter.appendChild(label);
+ moduleFilter.appendChild(dropDown);
+ addEvent(moduleFilter, "submit", interceptNavigation);
+ addEvent(moduleFilter, "reset", function () {
+
+ // Let the reset happen, then update styles
+ window.setTimeout(selectionChange);
+ });
+
+ // Enables show/hide for the dropdown
+ function searchFocus() {
+ if (dropDown.style.display !== "none") {
+ return;
+ }
+
+ dropDown.style.display = "block";
+ addEvent(document$$1, "click", hideHandler);
+ addEvent(document$$1, "keydown", hideHandler);
+
+ // Hide on Escape keydown or outside-container click
+ function hideHandler(e) {
+ var inContainer = moduleFilter.contains(e.target);
+
+ if (e.keyCode === 27 || !inContainer) {
+ if (e.keyCode === 27 && inContainer) {
+ moduleSearch.focus();
+ }
+ dropDown.style.display = "none";
+ removeEvent(document$$1, "click", hideHandler);
+ removeEvent(document$$1, "keydown", hideHandler);
+ moduleSearch.value = "";
+ searchInput();
+ }
+ }
+ }
+
+ // Processes module search box input
+ function searchInput() {
+ var i,
+ item,
+ searchText = moduleSearch.value.toLowerCase(),
+ listItems = dropDownList.children;
+
+ for (i = 0; i < listItems.length; i++) {
+ item = listItems[i];
+ if (!searchText || item.textContent.toLowerCase().indexOf(searchText) > -1) {
+ item.style.display = "";
+ } else {
+ item.style.display = "none";
+ }
+ }
+ }
+
+ // Processes selection changes
+ function selectionChange(evt) {
+ var i,
+ item,
+ checkbox = evt && evt.target || allCheckbox,
+ modulesList = dropDownList.getElementsByTagName("input"),
+ selectedNames = [];
+
+ toggleClass(checkbox.parentNode, "checked", checkbox.checked);
+
+ dirty = false;
+ if (checkbox.checked && checkbox !== allCheckbox) {
+ allCheckbox.checked = false;
+ removeClass(allCheckbox.parentNode, "checked");
+ }
+ for (i = 0; i < modulesList.length; i++) {
+ item = modulesList[i];
+ if (!evt) {
+ toggleClass(item.parentNode, "checked", item.checked);
+ } else if (checkbox === allCheckbox && checkbox.checked) {
+ item.checked = false;
+ removeClass(item.parentNode, "checked");
+ }
+ dirty = dirty || item.checked !== item.defaultChecked;
+ if (item.checked) {
+ selectedNames.push(item.parentNode.textContent);
+ }
+ }
+
+ commit.style.display = reset.style.display = dirty ? "" : "none";
+ moduleSearch.placeholder = selectedNames.join(", ") || allCheckbox.parentNode.textContent;
+ moduleSearch.title = "Type to filter list. Current selection:\n" + (selectedNames.join("\n") || allCheckbox.parentNode.textContent);
+ }
+
+ return moduleFilter;
+ }
+
+ function appendToolbar() {
+ var toolbar = id("qunit-testrunner-toolbar");
+
+ if (toolbar) {
+ toolbar.appendChild(toolbarUrlConfigContainer());
+ toolbar.appendChild(toolbarModuleFilter());
+ toolbar.appendChild(toolbarLooseFilter());
+ toolbar.appendChild(document$$1.createElement("div")).className = "clearfix";
+ }
+ }
+
+ function appendHeader() {
+ var header = id("qunit-header");
+
+ if (header) {
+ header.innerHTML = "" + header.innerHTML + " ";
+ }
+ }
+
+ function appendBanner() {
+ var banner = id("qunit-banner");
+
+ if (banner) {
+ banner.className = "";
+ }
+ }
+
+ function appendTestResults() {
+ var tests = id("qunit-tests"),
+ result = id("qunit-testresult"),
+ controls;
+
+ if (result) {
+ result.parentNode.removeChild(result);
+ }
+
+ if (tests) {
+ tests.innerHTML = "";
+ result = document$$1.createElement("p");
+ result.id = "qunit-testresult";
+ result.className = "result";
+ tests.parentNode.insertBefore(result, tests);
+ result.innerHTML = "Running...
" + "" + "";
+ controls = id("qunit-testresult-controls");
+ }
+
+ if (controls) {
+ controls.appendChild(abortTestsButton());
+ }
+ }
+
+ function appendFilteredTest() {
+ var testId = QUnit.config.testId;
+ if (!testId || testId.length <= 0) {
+ return "";
+ }
+ return "Rerunning selected tests: " + escapeText(testId.join(", ")) + "
Run all tests ";
+ }
+
+ function appendUserAgent() {
+ var userAgent = id("qunit-userAgent");
+
+ if (userAgent) {
+ userAgent.innerHTML = "";
+ userAgent.appendChild(document$$1.createTextNode("QUnit " + QUnit.version + "; " + navigator.userAgent));
+ }
+ }
+
+ function appendInterface() {
+ var qunit = id("qunit");
+
+ if (qunit) {
+ qunit.innerHTML = "" + "" + "" + appendFilteredTest() + "" + "
";
+ }
+
+ appendHeader();
+ appendBanner();
+ appendTestResults();
+ appendUserAgent();
+ appendToolbar();
+ }
+
+ function appendTestsList(modules) {
+ var i, l, x, z, test, moduleObj;
+
+ for (i = 0, l = modules.length; i < l; i++) {
+ moduleObj = modules[i];
+
+ for (x = 0, z = moduleObj.tests.length; x < z; x++) {
+ test = moduleObj.tests[x];
+
+ appendTest(test.name, test.testId, moduleObj.name);
+ }
+ }
+ }
+
+ function appendTest(name, testId, moduleName) {
+ var title,
+ rerunTrigger,
+ testBlock,
+ assertList,
+ tests = id("qunit-tests");
+
+ if (!tests) {
+ return;
+ }
+
+ title = document$$1.createElement("strong");
+ title.innerHTML = getNameHtml(name, moduleName);
+
+ rerunTrigger = document$$1.createElement("a");
+ rerunTrigger.innerHTML = "Rerun";
+ rerunTrigger.href = setUrl({ testId: testId });
+
+ testBlock = document$$1.createElement("li");
+ testBlock.appendChild(title);
+ testBlock.appendChild(rerunTrigger);
+ testBlock.id = "qunit-test-output-" + testId;
+
+ assertList = document$$1.createElement("ol");
+ assertList.className = "qunit-assert-list";
+
+ testBlock.appendChild(assertList);
+
+ tests.appendChild(testBlock);
+ }
+
+ // HTML Reporter initialization and load
+ QUnit.begin(function (details) {
+ var i, moduleObj, tests;
+
+ // Sort modules by name for the picker
+ for (i = 0; i < details.modules.length; i++) {
+ moduleObj = details.modules[i];
+ if (moduleObj.name) {
+ modulesList.push(moduleObj.name);
+ }
+ }
+ modulesList.sort(function (a, b) {
+ return a.localeCompare(b);
+ });
+
+ // Initialize QUnit elements
+ appendInterface();
+ appendTestsList(details.modules);
+ tests = id("qunit-tests");
+ if (tests && config.hidepassed) {
+ addClass(tests, "hidepass");
+ }
+ });
+
+ QUnit.done(function (details) {
+ var banner = id("qunit-banner"),
+ tests = id("qunit-tests"),
+ abortButton = id("qunit-abort-tests-button"),
+ totalTests = stats.passedTests + stats.skippedTests + stats.todoTests + stats.failedTests,
+ html = [totalTests, " tests completed in ", details.runtime, " milliseconds, with ", stats.failedTests, " failed, ", stats.skippedTests, " skipped, and ", stats.todoTests, " todo.
", "", details.passed, " assertions of ", details.total, " passed, ", details.failed, " failed."].join(""),
+ test,
+ assertLi,
+ assertList;
+
+ // Update remaing tests to aborted
+ if (abortButton && abortButton.disabled) {
+ html = "Tests aborted after " + details.runtime + " milliseconds.";
+
+ for (var i = 0; i < tests.children.length; i++) {
+ test = tests.children[i];
+ if (test.className === "" || test.className === "running") {
+ test.className = "aborted";
+ assertList = test.getElementsByTagName("ol")[0];
+ assertLi = document$$1.createElement("li");
+ assertLi.className = "fail";
+ assertLi.innerHTML = "Test aborted.";
+ assertList.appendChild(assertLi);
+ }
+ }
+ }
+
+ if (banner && (!abortButton || abortButton.disabled === false)) {
+ banner.className = stats.failedTests ? "qunit-fail" : "qunit-pass";
+ }
+
+ if (abortButton) {
+ abortButton.parentNode.removeChild(abortButton);
+ }
+
+ if (tests) {
+ id("qunit-testresult-display").innerHTML = html;
+ }
+
+ if (config.altertitle && document$$1.title) {
+
+ // Show ✖ for good, ✔ for bad suite result in title
+ // use escape sequences in case file gets loaded with non-utf-8
+ // charset
+ document$$1.title = [stats.failedTests ? "\u2716" : "\u2714", document$$1.title.replace(/^[\u2714\u2716] /i, "")].join(" ");
+ }
+
+ // Scroll back to top to show results
+ if (config.scrolltop && window.scrollTo) {
+ window.scrollTo(0, 0);
+ }
+ });
+
+ function getNameHtml(name, module) {
+ var nameHtml = "";
+
+ if (module) {
+ nameHtml = "" + escapeText(module) + ": ";
+ }
+
+ nameHtml += "" + escapeText(name) + "";
+
+ return nameHtml;
+ }
+
+ QUnit.testStart(function (details) {
+ var running, testBlock, bad;
+
+ testBlock = id("qunit-test-output-" + details.testId);
+ if (testBlock) {
+ testBlock.className = "running";
+ } else {
+
+ // Report later registered tests
+ appendTest(details.name, details.testId, details.module);
+ }
+
+ running = id("qunit-testresult-display");
+ if (running) {
+ bad = QUnit.config.reorder && details.previousFailure;
+
+ running.innerHTML = [bad ? "Rerunning previously failed test:
" : "Running:
", getNameHtml(details.name, details.module)].join("");
+ }
+ });
+
+ function stripHtml(string) {
+
+ // Strip tags, html entity and whitespaces
+ return string.replace(/<\/?[^>]+(>|$)/g, "").replace(/\"/g, "").replace(/\s+/g, "");
+ }
+
+ QUnit.log(function (details) {
+ var assertList,
+ assertLi,
+ message,
+ expected,
+ actual,
+ diff,
+ showDiff = false,
+ testItem = id("qunit-test-output-" + details.testId);
+
+ if (!testItem) {
+ return;
+ }
+
+ message = escapeText(details.message) || (details.result ? "okay" : "failed");
+ message = "" + message + "";
+ message += "@ " + details.runtime + " ms";
+
+ // The pushFailure doesn't provide details.expected
+ // when it calls, it's implicit to also not show expected and diff stuff
+ // Also, we need to check details.expected existence, as it can exist and be undefined
+ if (!details.result && hasOwn.call(details, "expected")) {
+ if (details.negative) {
+ expected = "NOT " + QUnit.dump.parse(details.expected);
+ } else {
+ expected = QUnit.dump.parse(details.expected);
+ }
+
+ actual = QUnit.dump.parse(details.actual);
+ message += "Expected: | " + escapeText(expected) + " |
";
+
+ if (actual !== expected) {
+
+ message += "Result: | " + escapeText(actual) + " |
";
+
+ if (typeof details.actual === "number" && typeof details.expected === "number") {
+ if (!isNaN(details.actual) && !isNaN(details.expected)) {
+ showDiff = true;
+ diff = details.actual - details.expected;
+ diff = (diff > 0 ? "+" : "") + diff;
+ }
+ } else if (typeof details.actual !== "boolean" && typeof details.expected !== "boolean") {
+ diff = QUnit.diff(expected, actual);
+
+ // don't show diff if there is zero overlap
+ showDiff = stripHtml(diff).length !== stripHtml(expected).length + stripHtml(actual).length;
+ }
+
+ if (showDiff) {
+ message += "Diff: | " + diff + " |
";
+ }
+ } else if (expected.indexOf("[object Array]") !== -1 || expected.indexOf("[object Object]") !== -1) {
+ message += "Message: | " + "Diff suppressed as the depth of object is more than current max depth (" + QUnit.config.maxDepth + "). Hint: Use QUnit.dump.maxDepth to " + " run with a higher max depth or " + "Rerun without max depth. |
";
+ } else {
+ message += "Message: | " + "Diff suppressed as the expected and actual results have an equivalent" + " serialization |
";
+ }
+
+ if (details.source) {
+ message += "Source: | " + escapeText(details.source) + " |
";
+ }
+
+ message += "
";
+
+ // This occurs when pushFailure is set and we have an extracted stack trace
+ } else if (!details.result && details.source) {
+ message += "" + "Source: | " + escapeText(details.source) + " |
" + "
";
+ }
+
+ assertList = testItem.getElementsByTagName("ol")[0];
+
+ assertLi = document$$1.createElement("li");
+ assertLi.className = details.result ? "pass" : "fail";
+ assertLi.innerHTML = message;
+ assertList.appendChild(assertLi);
+ });
+
+ QUnit.testDone(function (details) {
+ var testTitle,
+ time,
+ testItem,
+ assertList,
+ good,
+ bad,
+ testCounts,
+ skipped,
+ sourceName,
+ tests = id("qunit-tests");
+
+ if (!tests) {
+ return;
+ }
+
+ testItem = id("qunit-test-output-" + details.testId);
+
+ assertList = testItem.getElementsByTagName("ol")[0];
+
+ good = details.passed;
+ bad = details.failed;
+
+ // This test passed if it has no unexpected failed assertions
+ var testPassed = details.failed > 0 ? details.todo : !details.todo;
+
+ if (testPassed) {
+
+ // Collapse the passing tests
+ addClass(assertList, "qunit-collapsed");
+ } else if (config.collapse) {
+ if (!collapseNext) {
+
+ // Skip collapsing the first failing test
+ collapseNext = true;
+ } else {
+
+ // Collapse remaining tests
+ addClass(assertList, "qunit-collapsed");
+ }
+ }
+
+ // The testItem.firstChild is the test name
+ testTitle = testItem.firstChild;
+
+ testCounts = bad ? "" + bad + ", " + "" + good + ", " : "";
+
+ testTitle.innerHTML += " (" + testCounts + details.assertions.length + ")";
+
+ if (details.skipped) {
+ stats.skippedTests++;
+
+ testItem.className = "skipped";
+ skipped = document$$1.createElement("em");
+ skipped.className = "qunit-skipped-label";
+ skipped.innerHTML = "skipped";
+ testItem.insertBefore(skipped, testTitle);
+ } else {
+ addEvent(testTitle, "click", function () {
+ toggleClass(assertList, "qunit-collapsed");
+ });
+
+ testItem.className = testPassed ? "pass" : "fail";
+
+ if (details.todo) {
+ var todoLabel = document$$1.createElement("em");
+ todoLabel.className = "qunit-todo-label";
+ todoLabel.innerHTML = "todo";
+ testItem.className += " todo";
+ testItem.insertBefore(todoLabel, testTitle);
+ }
+
+ time = document$$1.createElement("span");
+ time.className = "runtime";
+ time.innerHTML = details.runtime + " ms";
+ testItem.insertBefore(time, assertList);
+
+ if (!testPassed) {
+ stats.failedTests++;
+ } else if (details.todo) {
+ stats.todoTests++;
+ } else {
+ stats.passedTests++;
+ }
+ }
+
+ // Show the source of the test when showing assertions
+ if (details.source) {
+ sourceName = document$$1.createElement("p");
+ sourceName.innerHTML = "Source: " + details.source;
+ addClass(sourceName, "qunit-source");
+ if (testPassed) {
+ addClass(sourceName, "qunit-collapsed");
+ }
+ addEvent(testTitle, "click", function () {
+ toggleClass(sourceName, "qunit-collapsed");
+ });
+ testItem.appendChild(sourceName);
+ }
+ });
+
+ // Avoid readyState issue with phantomjs
+ // Ref: #818
+ var notPhantom = function (p) {
+ return !(p && p.version && p.version.major > 0);
+ }(window.phantom);
+
+ if (notPhantom && document$$1.readyState === "complete") {
+ QUnit.load();
+ } else {
+ addEvent(window, "load", QUnit.load);
+ }
+
+ // Wrap window.onerror. We will call the original window.onerror to see if
+ // the existing handler fully handles the error; if not, we will call the
+ // QUnit.onError function.
+ var originalWindowOnError = window.onerror;
+
+ // Cover uncaught exceptions
+ // Returning true will suppress the default browser handler,
+ // returning false will let it run.
+ window.onerror = function (message, fileName, lineNumber) {
+ var ret = false;
+ if (originalWindowOnError) {
+ for (var _len = arguments.length, args = Array(_len > 3 ? _len - 3 : 0), _key = 3; _key < _len; _key++) {
+ args[_key - 3] = arguments[_key];
+ }
+
+ ret = originalWindowOnError.call.apply(originalWindowOnError, [this, message, fileName, lineNumber].concat(args));
+ }
+
+ // Treat return value as window.onerror itself does,
+ // Only do our handling if not suppressed.
+ if (ret !== true) {
+ var error = {
+ message: message,
+ fileName: fileName,
+ lineNumber: lineNumber
+ };
+
+ ret = QUnit.onError(error);
+ }
+
+ return ret;
+ };
+
+ // Listen for unhandled rejections, and call QUnit.onUnhandledRejection
+ window.addEventListener("unhandledrejection", function (event) {
+ QUnit.onUnhandledRejection(event.reason);
+ });
+ })();
+
+ /*
+ * This file is a modified version of google-diff-match-patch's JavaScript implementation
+ * (https://code.google.com/p/google-diff-match-patch/source/browse/trunk/javascript/diff_match_patch_uncompressed.js),
+ * modifications are licensed as more fully set forth in LICENSE.txt.
+ *
+ * The original source of google-diff-match-patch is attributable and licensed as follows:
+ *
+ * Copyright 2006 Google Inc.
+ * https://code.google.com/p/google-diff-match-patch/
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * More Info:
+ * https://code.google.com/p/google-diff-match-patch/
+ *
+ * Usage: QUnit.diff(expected, actual)
+ *
+ */
+ QUnit.diff = function () {
+ function DiffMatchPatch() {}
+
+ // DIFF FUNCTIONS
+
+ /**
+ * The data structure representing a diff is an array of tuples:
+ * [[DIFF_DELETE, 'Hello'], [DIFF_INSERT, 'Goodbye'], [DIFF_EQUAL, ' world.']]
+ * which means: delete 'Hello', add 'Goodbye' and keep ' world.'
+ */
+ var DIFF_DELETE = -1,
+ DIFF_INSERT = 1,
+ DIFF_EQUAL = 0;
+
+ /**
+ * Find the differences between two texts. Simplifies the problem by stripping
+ * any common prefix or suffix off the texts before diffing.
+ * @param {string} text1 Old string to be diffed.
+ * @param {string} text2 New string to be diffed.
+ * @param {boolean=} optChecklines Optional speedup flag. If present and false,
+ * then don't run a line-level diff first to identify the changed areas.
+ * Defaults to true, which does a faster, slightly less optimal diff.
+ * @return {!Array.} Array of diff tuples.
+ */
+ DiffMatchPatch.prototype.DiffMain = function (text1, text2, optChecklines) {
+ var deadline, checklines, commonlength, commonprefix, commonsuffix, diffs;
+
+ // The diff must be complete in up to 1 second.
+ deadline = new Date().getTime() + 1000;
+
+ // Check for null inputs.
+ if (text1 === null || text2 === null) {
+ throw new Error("Null input. (DiffMain)");
+ }
+
+ // Check for equality (speedup).
+ if (text1 === text2) {
+ if (text1) {
+ return [[DIFF_EQUAL, text1]];
+ }
+ return [];
+ }
+
+ if (typeof optChecklines === "undefined") {
+ optChecklines = true;
+ }
+
+ checklines = optChecklines;
+
+ // Trim off common prefix (speedup).
+ commonlength = this.diffCommonPrefix(text1, text2);
+ commonprefix = text1.substring(0, commonlength);
+ text1 = text1.substring(commonlength);
+ text2 = text2.substring(commonlength);
+
+ // Trim off common suffix (speedup).
+ commonlength = this.diffCommonSuffix(text1, text2);
+ commonsuffix = text1.substring(text1.length - commonlength);
+ text1 = text1.substring(0, text1.length - commonlength);
+ text2 = text2.substring(0, text2.length - commonlength);
+
+ // Compute the diff on the middle block.
+ diffs = this.diffCompute(text1, text2, checklines, deadline);
+
+ // Restore the prefix and suffix.
+ if (commonprefix) {
+ diffs.unshift([DIFF_EQUAL, commonprefix]);
+ }
+ if (commonsuffix) {
+ diffs.push([DIFF_EQUAL, commonsuffix]);
+ }
+ this.diffCleanupMerge(diffs);
+ return diffs;
+ };
+
+ /**
+ * Reduce the number of edits by eliminating operationally trivial equalities.
+ * @param {!Array.} diffs Array of diff tuples.
+ */
+ DiffMatchPatch.prototype.diffCleanupEfficiency = function (diffs) {
+ var changes, equalities, equalitiesLength, lastequality, pointer, preIns, preDel, postIns, postDel;
+ changes = false;
+ equalities = []; // Stack of indices where equalities are found.
+ equalitiesLength = 0; // Keeping our own length var is faster in JS.
+ /** @type {?string} */
+ lastequality = null;
+
+ // Always equal to diffs[equalities[equalitiesLength - 1]][1]
+ pointer = 0; // Index of current position.
+
+ // Is there an insertion operation before the last equality.
+ preIns = false;
+
+ // Is there a deletion operation before the last equality.
+ preDel = false;
+
+ // Is there an insertion operation after the last equality.
+ postIns = false;
+
+ // Is there a deletion operation after the last equality.
+ postDel = false;
+ while (pointer < diffs.length) {
+
+ // Equality found.
+ if (diffs[pointer][0] === DIFF_EQUAL) {
+ if (diffs[pointer][1].length < 4 && (postIns || postDel)) {
+
+ // Candidate found.
+ equalities[equalitiesLength++] = pointer;
+ preIns = postIns;
+ preDel = postDel;
+ lastequality = diffs[pointer][1];
+ } else {
+
+ // Not a candidate, and can never become one.
+ equalitiesLength = 0;
+ lastequality = null;
+ }
+ postIns = postDel = false;
+
+ // An insertion or deletion.
+ } else {
+
+ if (diffs[pointer][0] === DIFF_DELETE) {
+ postDel = true;
+ } else {
+ postIns = true;
+ }
+
+ /*
+ * Five types to be split:
+ * ABXYCD
+ * AXCD
+ * ABXC
+ * AXCD
+ * ABXC
+ */
+ if (lastequality && (preIns && preDel && postIns && postDel || lastequality.length < 2 && preIns + preDel + postIns + postDel === 3)) {
+
+ // Duplicate record.
+ diffs.splice(equalities[equalitiesLength - 1], 0, [DIFF_DELETE, lastequality]);
+
+ // Change second copy to insert.
+ diffs[equalities[equalitiesLength - 1] + 1][0] = DIFF_INSERT;
+ equalitiesLength--; // Throw away the equality we just deleted;
+ lastequality = null;
+ if (preIns && preDel) {
+
+ // No changes made which could affect previous entry, keep going.
+ postIns = postDel = true;
+ equalitiesLength = 0;
+ } else {
+ equalitiesLength--; // Throw away the previous equality.
+ pointer = equalitiesLength > 0 ? equalities[equalitiesLength - 1] : -1;
+ postIns = postDel = false;
+ }
+ changes = true;
+ }
+ }
+ pointer++;
+ }
+
+ if (changes) {
+ this.diffCleanupMerge(diffs);
+ }
+ };
+
+ /**
+ * Convert a diff array into a pretty HTML report.
+ * @param {!Array.} diffs Array of diff tuples.
+ * @param {integer} string to be beautified.
+ * @return {string} HTML representation.
+ */
+ DiffMatchPatch.prototype.diffPrettyHtml = function (diffs) {
+ var op,
+ data,
+ x,
+ html = [];
+ for (x = 0; x < diffs.length; x++) {
+ op = diffs[x][0]; // Operation (insert, delete, equal)
+ data = diffs[x][1]; // Text of change.
+ switch (op) {
+ case DIFF_INSERT:
+ html[x] = "" + escapeText(data) + "";
+ break;
+ case DIFF_DELETE:
+ html[x] = "" + escapeText(data) + "";
+ break;
+ case DIFF_EQUAL:
+ html[x] = "" + escapeText(data) + "";
+ break;
+ }
+ }
+ return html.join("");
+ };
+
+ /**
+ * Determine the common prefix of two strings.
+ * @param {string} text1 First string.
+ * @param {string} text2 Second string.
+ * @return {number} The number of characters common to the start of each
+ * string.
+ */
+ DiffMatchPatch.prototype.diffCommonPrefix = function (text1, text2) {
+ var pointermid, pointermax, pointermin, pointerstart;
+
+ // Quick check for common null cases.
+ if (!text1 || !text2 || text1.charAt(0) !== text2.charAt(0)) {
+ return 0;
+ }
+
+ // Binary search.
+ // Performance analysis: https://neil.fraser.name/news/2007/10/09/
+ pointermin = 0;
+ pointermax = Math.min(text1.length, text2.length);
+ pointermid = pointermax;
+ pointerstart = 0;
+ while (pointermin < pointermid) {
+ if (text1.substring(pointerstart, pointermid) === text2.substring(pointerstart, pointermid)) {
+ pointermin = pointermid;
+ pointerstart = pointermin;
+ } else {
+ pointermax = pointermid;
+ }
+ pointermid = Math.floor((pointermax - pointermin) / 2 + pointermin);
+ }
+ return pointermid;
+ };
+
+ /**
+ * Determine the common suffix of two strings.
+ * @param {string} text1 First string.
+ * @param {string} text2 Second string.
+ * @return {number} The number of characters common to the end of each string.
+ */
+ DiffMatchPatch.prototype.diffCommonSuffix = function (text1, text2) {
+ var pointermid, pointermax, pointermin, pointerend;
+
+ // Quick check for common null cases.
+ if (!text1 || !text2 || text1.charAt(text1.length - 1) !== text2.charAt(text2.length - 1)) {
+ return 0;
+ }
+
+ // Binary search.
+ // Performance analysis: https://neil.fraser.name/news/2007/10/09/
+ pointermin = 0;
+ pointermax = Math.min(text1.length, text2.length);
+ pointermid = pointermax;
+ pointerend = 0;
+ while (pointermin < pointermid) {
+ if (text1.substring(text1.length - pointermid, text1.length - pointerend) === text2.substring(text2.length - pointermid, text2.length - pointerend)) {
+ pointermin = pointermid;
+ pointerend = pointermin;
+ } else {
+ pointermax = pointermid;
+ }
+ pointermid = Math.floor((pointermax - pointermin) / 2 + pointermin);
+ }
+ return pointermid;
+ };
+
+ /**
+ * Find the differences between two texts. Assumes that the texts do not
+ * have any common prefix or suffix.
+ * @param {string} text1 Old string to be diffed.
+ * @param {string} text2 New string to be diffed.
+ * @param {boolean} checklines Speedup flag. If false, then don't run a
+ * line-level diff first to identify the changed areas.
+ * If true, then run a faster, slightly less optimal diff.
+ * @param {number} deadline Time when the diff should be complete by.
+ * @return {!Array.} Array of diff tuples.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffCompute = function (text1, text2, checklines, deadline) {
+ var diffs, longtext, shorttext, i, hm, text1A, text2A, text1B, text2B, midCommon, diffsA, diffsB;
+
+ if (!text1) {
+
+ // Just add some text (speedup).
+ return [[DIFF_INSERT, text2]];
+ }
+
+ if (!text2) {
+
+ // Just delete some text (speedup).
+ return [[DIFF_DELETE, text1]];
+ }
+
+ longtext = text1.length > text2.length ? text1 : text2;
+ shorttext = text1.length > text2.length ? text2 : text1;
+ i = longtext.indexOf(shorttext);
+ if (i !== -1) {
+
+ // Shorter text is inside the longer text (speedup).
+ diffs = [[DIFF_INSERT, longtext.substring(0, i)], [DIFF_EQUAL, shorttext], [DIFF_INSERT, longtext.substring(i + shorttext.length)]];
+
+ // Swap insertions for deletions if diff is reversed.
+ if (text1.length > text2.length) {
+ diffs[0][0] = diffs[2][0] = DIFF_DELETE;
+ }
+ return diffs;
+ }
+
+ if (shorttext.length === 1) {
+
+ // Single character string.
+ // After the previous speedup, the character can't be an equality.
+ return [[DIFF_DELETE, text1], [DIFF_INSERT, text2]];
+ }
+
+ // Check to see if the problem can be split in two.
+ hm = this.diffHalfMatch(text1, text2);
+ if (hm) {
+
+ // A half-match was found, sort out the return data.
+ text1A = hm[0];
+ text1B = hm[1];
+ text2A = hm[2];
+ text2B = hm[3];
+ midCommon = hm[4];
+
+ // Send both pairs off for separate processing.
+ diffsA = this.DiffMain(text1A, text2A, checklines, deadline);
+ diffsB = this.DiffMain(text1B, text2B, checklines, deadline);
+
+ // Merge the results.
+ return diffsA.concat([[DIFF_EQUAL, midCommon]], diffsB);
+ }
+
+ if (checklines && text1.length > 100 && text2.length > 100) {
+ return this.diffLineMode(text1, text2, deadline);
+ }
+
+ return this.diffBisect(text1, text2, deadline);
+ };
+
+ /**
+ * Do the two texts share a substring which is at least half the length of the
+ * longer text?
+ * This speedup can produce non-minimal diffs.
+ * @param {string} text1 First string.
+ * @param {string} text2 Second string.
+ * @return {Array.} Five element Array, containing the prefix of
+ * text1, the suffix of text1, the prefix of text2, the suffix of
+ * text2 and the common middle. Or null if there was no match.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffHalfMatch = function (text1, text2) {
+ var longtext, shorttext, dmp, text1A, text2B, text2A, text1B, midCommon, hm1, hm2, hm;
+
+ longtext = text1.length > text2.length ? text1 : text2;
+ shorttext = text1.length > text2.length ? text2 : text1;
+ if (longtext.length < 4 || shorttext.length * 2 < longtext.length) {
+ return null; // Pointless.
+ }
+ dmp = this; // 'this' becomes 'window' in a closure.
+
+ /**
+ * Does a substring of shorttext exist within longtext such that the substring
+ * is at least half the length of longtext?
+ * Closure, but does not reference any external variables.
+ * @param {string} longtext Longer string.
+ * @param {string} shorttext Shorter string.
+ * @param {number} i Start index of quarter length substring within longtext.
+ * @return {Array.} Five element Array, containing the prefix of
+ * longtext, the suffix of longtext, the prefix of shorttext, the suffix
+ * of shorttext and the common middle. Or null if there was no match.
+ * @private
+ */
+ function diffHalfMatchI(longtext, shorttext, i) {
+ var seed, j, bestCommon, prefixLength, suffixLength, bestLongtextA, bestLongtextB, bestShorttextA, bestShorttextB;
+
+ // Start with a 1/4 length substring at position i as a seed.
+ seed = longtext.substring(i, i + Math.floor(longtext.length / 4));
+ j = -1;
+ bestCommon = "";
+ while ((j = shorttext.indexOf(seed, j + 1)) !== -1) {
+ prefixLength = dmp.diffCommonPrefix(longtext.substring(i), shorttext.substring(j));
+ suffixLength = dmp.diffCommonSuffix(longtext.substring(0, i), shorttext.substring(0, j));
+ if (bestCommon.length < suffixLength + prefixLength) {
+ bestCommon = shorttext.substring(j - suffixLength, j) + shorttext.substring(j, j + prefixLength);
+ bestLongtextA = longtext.substring(0, i - suffixLength);
+ bestLongtextB = longtext.substring(i + prefixLength);
+ bestShorttextA = shorttext.substring(0, j - suffixLength);
+ bestShorttextB = shorttext.substring(j + prefixLength);
+ }
+ }
+ if (bestCommon.length * 2 >= longtext.length) {
+ return [bestLongtextA, bestLongtextB, bestShorttextA, bestShorttextB, bestCommon];
+ } else {
+ return null;
+ }
+ }
+
+ // First check if the second quarter is the seed for a half-match.
+ hm1 = diffHalfMatchI(longtext, shorttext, Math.ceil(longtext.length / 4));
+
+ // Check again based on the third quarter.
+ hm2 = diffHalfMatchI(longtext, shorttext, Math.ceil(longtext.length / 2));
+ if (!hm1 && !hm2) {
+ return null;
+ } else if (!hm2) {
+ hm = hm1;
+ } else if (!hm1) {
+ hm = hm2;
+ } else {
+
+ // Both matched. Select the longest.
+ hm = hm1[4].length > hm2[4].length ? hm1 : hm2;
+ }
+
+ // A half-match was found, sort out the return data.
+ if (text1.length > text2.length) {
+ text1A = hm[0];
+ text1B = hm[1];
+ text2A = hm[2];
+ text2B = hm[3];
+ } else {
+ text2A = hm[0];
+ text2B = hm[1];
+ text1A = hm[2];
+ text1B = hm[3];
+ }
+ midCommon = hm[4];
+ return [text1A, text1B, text2A, text2B, midCommon];
+ };
+
+ /**
+ * Do a quick line-level diff on both strings, then rediff the parts for
+ * greater accuracy.
+ * This speedup can produce non-minimal diffs.
+ * @param {string} text1 Old string to be diffed.
+ * @param {string} text2 New string to be diffed.
+ * @param {number} deadline Time when the diff should be complete by.
+ * @return {!Array.} Array of diff tuples.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffLineMode = function (text1, text2, deadline) {
+ var a, diffs, linearray, pointer, countInsert, countDelete, textInsert, textDelete, j;
+
+ // Scan the text on a line-by-line basis first.
+ a = this.diffLinesToChars(text1, text2);
+ text1 = a.chars1;
+ text2 = a.chars2;
+ linearray = a.lineArray;
+
+ diffs = this.DiffMain(text1, text2, false, deadline);
+
+ // Convert the diff back to original text.
+ this.diffCharsToLines(diffs, linearray);
+
+ // Eliminate freak matches (e.g. blank lines)
+ this.diffCleanupSemantic(diffs);
+
+ // Rediff any replacement blocks, this time character-by-character.
+ // Add a dummy entry at the end.
+ diffs.push([DIFF_EQUAL, ""]);
+ pointer = 0;
+ countDelete = 0;
+ countInsert = 0;
+ textDelete = "";
+ textInsert = "";
+ while (pointer < diffs.length) {
+ switch (diffs[pointer][0]) {
+ case DIFF_INSERT:
+ countInsert++;
+ textInsert += diffs[pointer][1];
+ break;
+ case DIFF_DELETE:
+ countDelete++;
+ textDelete += diffs[pointer][1];
+ break;
+ case DIFF_EQUAL:
+
+ // Upon reaching an equality, check for prior redundancies.
+ if (countDelete >= 1 && countInsert >= 1) {
+
+ // Delete the offending records and add the merged ones.
+ diffs.splice(pointer - countDelete - countInsert, countDelete + countInsert);
+ pointer = pointer - countDelete - countInsert;
+ a = this.DiffMain(textDelete, textInsert, false, deadline);
+ for (j = a.length - 1; j >= 0; j--) {
+ diffs.splice(pointer, 0, a[j]);
+ }
+ pointer = pointer + a.length;
+ }
+ countInsert = 0;
+ countDelete = 0;
+ textDelete = "";
+ textInsert = "";
+ break;
+ }
+ pointer++;
+ }
+ diffs.pop(); // Remove the dummy entry at the end.
+
+ return diffs;
+ };
+
+ /**
+ * Find the 'middle snake' of a diff, split the problem in two
+ * and return the recursively constructed diff.
+ * See Myers 1986 paper: An O(ND) Difference Algorithm and Its Variations.
+ * @param {string} text1 Old string to be diffed.
+ * @param {string} text2 New string to be diffed.
+ * @param {number} deadline Time at which to bail if not yet complete.
+ * @return {!Array.} Array of diff tuples.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffBisect = function (text1, text2, deadline) {
+ var text1Length, text2Length, maxD, vOffset, vLength, v1, v2, x, delta, front, k1start, k1end, k2start, k2end, k2Offset, k1Offset, x1, x2, y1, y2, d, k1, k2;
+
+ // Cache the text lengths to prevent multiple calls.
+ text1Length = text1.length;
+ text2Length = text2.length;
+ maxD = Math.ceil((text1Length + text2Length) / 2);
+ vOffset = maxD;
+ vLength = 2 * maxD;
+ v1 = new Array(vLength);
+ v2 = new Array(vLength);
+
+ // Setting all elements to -1 is faster in Chrome & Firefox than mixing
+ // integers and undefined.
+ for (x = 0; x < vLength; x++) {
+ v1[x] = -1;
+ v2[x] = -1;
+ }
+ v1[vOffset + 1] = 0;
+ v2[vOffset + 1] = 0;
+ delta = text1Length - text2Length;
+
+ // If the total number of characters is odd, then the front path will collide
+ // with the reverse path.
+ front = delta % 2 !== 0;
+
+ // Offsets for start and end of k loop.
+ // Prevents mapping of space beyond the grid.
+ k1start = 0;
+ k1end = 0;
+ k2start = 0;
+ k2end = 0;
+ for (d = 0; d < maxD; d++) {
+
+ // Bail out if deadline is reached.
+ if (new Date().getTime() > deadline) {
+ break;
+ }
+
+ // Walk the front path one step.
+ for (k1 = -d + k1start; k1 <= d - k1end; k1 += 2) {
+ k1Offset = vOffset + k1;
+ if (k1 === -d || k1 !== d && v1[k1Offset - 1] < v1[k1Offset + 1]) {
+ x1 = v1[k1Offset + 1];
+ } else {
+ x1 = v1[k1Offset - 1] + 1;
+ }
+ y1 = x1 - k1;
+ while (x1 < text1Length && y1 < text2Length && text1.charAt(x1) === text2.charAt(y1)) {
+ x1++;
+ y1++;
+ }
+ v1[k1Offset] = x1;
+ if (x1 > text1Length) {
+
+ // Ran off the right of the graph.
+ k1end += 2;
+ } else if (y1 > text2Length) {
+
+ // Ran off the bottom of the graph.
+ k1start += 2;
+ } else if (front) {
+ k2Offset = vOffset + delta - k1;
+ if (k2Offset >= 0 && k2Offset < vLength && v2[k2Offset] !== -1) {
+
+ // Mirror x2 onto top-left coordinate system.
+ x2 = text1Length - v2[k2Offset];
+ if (x1 >= x2) {
+
+ // Overlap detected.
+ return this.diffBisectSplit(text1, text2, x1, y1, deadline);
+ }
+ }
+ }
+ }
+
+ // Walk the reverse path one step.
+ for (k2 = -d + k2start; k2 <= d - k2end; k2 += 2) {
+ k2Offset = vOffset + k2;
+ if (k2 === -d || k2 !== d && v2[k2Offset - 1] < v2[k2Offset + 1]) {
+ x2 = v2[k2Offset + 1];
+ } else {
+ x2 = v2[k2Offset - 1] + 1;
+ }
+ y2 = x2 - k2;
+ while (x2 < text1Length && y2 < text2Length && text1.charAt(text1Length - x2 - 1) === text2.charAt(text2Length - y2 - 1)) {
+ x2++;
+ y2++;
+ }
+ v2[k2Offset] = x2;
+ if (x2 > text1Length) {
+
+ // Ran off the left of the graph.
+ k2end += 2;
+ } else if (y2 > text2Length) {
+
+ // Ran off the top of the graph.
+ k2start += 2;
+ } else if (!front) {
+ k1Offset = vOffset + delta - k2;
+ if (k1Offset >= 0 && k1Offset < vLength && v1[k1Offset] !== -1) {
+ x1 = v1[k1Offset];
+ y1 = vOffset + x1 - k1Offset;
+
+ // Mirror x2 onto top-left coordinate system.
+ x2 = text1Length - x2;
+ if (x1 >= x2) {
+
+ // Overlap detected.
+ return this.diffBisectSplit(text1, text2, x1, y1, deadline);
+ }
+ }
+ }
+ }
+ }
+
+ // Diff took too long and hit the deadline or
+ // number of diffs equals number of characters, no commonality at all.
+ return [[DIFF_DELETE, text1], [DIFF_INSERT, text2]];
+ };
+
+ /**
+ * Given the location of the 'middle snake', split the diff in two parts
+ * and recurse.
+ * @param {string} text1 Old string to be diffed.
+ * @param {string} text2 New string to be diffed.
+ * @param {number} x Index of split point in text1.
+ * @param {number} y Index of split point in text2.
+ * @param {number} deadline Time at which to bail if not yet complete.
+ * @return {!Array.} Array of diff tuples.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffBisectSplit = function (text1, text2, x, y, deadline) {
+ var text1a, text1b, text2a, text2b, diffs, diffsb;
+ text1a = text1.substring(0, x);
+ text2a = text2.substring(0, y);
+ text1b = text1.substring(x);
+ text2b = text2.substring(y);
+
+ // Compute both diffs serially.
+ diffs = this.DiffMain(text1a, text2a, false, deadline);
+ diffsb = this.DiffMain(text1b, text2b, false, deadline);
+
+ return diffs.concat(diffsb);
+ };
+
+ /**
+ * Reduce the number of edits by eliminating semantically trivial equalities.
+ * @param {!Array.} diffs Array of diff tuples.
+ */
+ DiffMatchPatch.prototype.diffCleanupSemantic = function (diffs) {
+ var changes, equalities, equalitiesLength, lastequality, pointer, lengthInsertions2, lengthDeletions2, lengthInsertions1, lengthDeletions1, deletion, insertion, overlapLength1, overlapLength2;
+ changes = false;
+ equalities = []; // Stack of indices where equalities are found.
+ equalitiesLength = 0; // Keeping our own length var is faster in JS.
+ /** @type {?string} */
+ lastequality = null;
+
+ // Always equal to diffs[equalities[equalitiesLength - 1]][1]
+ pointer = 0; // Index of current position.
+
+ // Number of characters that changed prior to the equality.
+ lengthInsertions1 = 0;
+ lengthDeletions1 = 0;
+
+ // Number of characters that changed after the equality.
+ lengthInsertions2 = 0;
+ lengthDeletions2 = 0;
+ while (pointer < diffs.length) {
+ if (diffs[pointer][0] === DIFF_EQUAL) {
+ // Equality found.
+ equalities[equalitiesLength++] = pointer;
+ lengthInsertions1 = lengthInsertions2;
+ lengthDeletions1 = lengthDeletions2;
+ lengthInsertions2 = 0;
+ lengthDeletions2 = 0;
+ lastequality = diffs[pointer][1];
+ } else {
+ // An insertion or deletion.
+ if (diffs[pointer][0] === DIFF_INSERT) {
+ lengthInsertions2 += diffs[pointer][1].length;
+ } else {
+ lengthDeletions2 += diffs[pointer][1].length;
+ }
+
+ // Eliminate an equality that is smaller or equal to the edits on both
+ // sides of it.
+ if (lastequality && lastequality.length <= Math.max(lengthInsertions1, lengthDeletions1) && lastequality.length <= Math.max(lengthInsertions2, lengthDeletions2)) {
+
+ // Duplicate record.
+ diffs.splice(equalities[equalitiesLength - 1], 0, [DIFF_DELETE, lastequality]);
+
+ // Change second copy to insert.
+ diffs[equalities[equalitiesLength - 1] + 1][0] = DIFF_INSERT;
+
+ // Throw away the equality we just deleted.
+ equalitiesLength--;
+
+ // Throw away the previous equality (it needs to be reevaluated).
+ equalitiesLength--;
+ pointer = equalitiesLength > 0 ? equalities[equalitiesLength - 1] : -1;
+
+ // Reset the counters.
+ lengthInsertions1 = 0;
+ lengthDeletions1 = 0;
+ lengthInsertions2 = 0;
+ lengthDeletions2 = 0;
+ lastequality = null;
+ changes = true;
+ }
+ }
+ pointer++;
+ }
+
+ // Normalize the diff.
+ if (changes) {
+ this.diffCleanupMerge(diffs);
+ }
+
+ // Find any overlaps between deletions and insertions.
+ // e.g: abcxxxxxxdef
+ // -> abcxxxdef
+ // e.g: xxxabcdefxxx
+ // -> defxxxabc
+ // Only extract an overlap if it is as big as the edit ahead or behind it.
+ pointer = 1;
+ while (pointer < diffs.length) {
+ if (diffs[pointer - 1][0] === DIFF_DELETE && diffs[pointer][0] === DIFF_INSERT) {
+ deletion = diffs[pointer - 1][1];
+ insertion = diffs[pointer][1];
+ overlapLength1 = this.diffCommonOverlap(deletion, insertion);
+ overlapLength2 = this.diffCommonOverlap(insertion, deletion);
+ if (overlapLength1 >= overlapLength2) {
+ if (overlapLength1 >= deletion.length / 2 || overlapLength1 >= insertion.length / 2) {
+
+ // Overlap found. Insert an equality and trim the surrounding edits.
+ diffs.splice(pointer, 0, [DIFF_EQUAL, insertion.substring(0, overlapLength1)]);
+ diffs[pointer - 1][1] = deletion.substring(0, deletion.length - overlapLength1);
+ diffs[pointer + 1][1] = insertion.substring(overlapLength1);
+ pointer++;
+ }
+ } else {
+ if (overlapLength2 >= deletion.length / 2 || overlapLength2 >= insertion.length / 2) {
+
+ // Reverse overlap found.
+ // Insert an equality and swap and trim the surrounding edits.
+ diffs.splice(pointer, 0, [DIFF_EQUAL, deletion.substring(0, overlapLength2)]);
+
+ diffs[pointer - 1][0] = DIFF_INSERT;
+ diffs[pointer - 1][1] = insertion.substring(0, insertion.length - overlapLength2);
+ diffs[pointer + 1][0] = DIFF_DELETE;
+ diffs[pointer + 1][1] = deletion.substring(overlapLength2);
+ pointer++;
+ }
+ }
+ pointer++;
+ }
+ pointer++;
+ }
+ };
+
+ /**
+ * Determine if the suffix of one string is the prefix of another.
+ * @param {string} text1 First string.
+ * @param {string} text2 Second string.
+ * @return {number} The number of characters common to the end of the first
+ * string and the start of the second string.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffCommonOverlap = function (text1, text2) {
+ var text1Length, text2Length, textLength, best, length, pattern, found;
+
+ // Cache the text lengths to prevent multiple calls.
+ text1Length = text1.length;
+ text2Length = text2.length;
+
+ // Eliminate the null case.
+ if (text1Length === 0 || text2Length === 0) {
+ return 0;
+ }
+
+ // Truncate the longer string.
+ if (text1Length > text2Length) {
+ text1 = text1.substring(text1Length - text2Length);
+ } else if (text1Length < text2Length) {
+ text2 = text2.substring(0, text1Length);
+ }
+ textLength = Math.min(text1Length, text2Length);
+
+ // Quick check for the worst case.
+ if (text1 === text2) {
+ return textLength;
+ }
+
+ // Start by looking for a single character match
+ // and increase length until no match is found.
+ // Performance analysis: https://neil.fraser.name/news/2010/11/04/
+ best = 0;
+ length = 1;
+ while (true) {
+ pattern = text1.substring(textLength - length);
+ found = text2.indexOf(pattern);
+ if (found === -1) {
+ return best;
+ }
+ length += found;
+ if (found === 0 || text1.substring(textLength - length) === text2.substring(0, length)) {
+ best = length;
+ length++;
+ }
+ }
+ };
+
+ /**
+ * Split two texts into an array of strings. Reduce the texts to a string of
+ * hashes where each Unicode character represents one line.
+ * @param {string} text1 First string.
+ * @param {string} text2 Second string.
+ * @return {{chars1: string, chars2: string, lineArray: !Array.}}
+ * An object containing the encoded text1, the encoded text2 and
+ * the array of unique strings.
+ * The zeroth element of the array of unique strings is intentionally blank.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffLinesToChars = function (text1, text2) {
+ var lineArray, lineHash, chars1, chars2;
+ lineArray = []; // E.g. lineArray[4] === 'Hello\n'
+ lineHash = {}; // E.g. lineHash['Hello\n'] === 4
+
+ // '\x00' is a valid character, but various debuggers don't like it.
+ // So we'll insert a junk entry to avoid generating a null character.
+ lineArray[0] = "";
+
+ /**
+ * Split a text into an array of strings. Reduce the texts to a string of
+ * hashes where each Unicode character represents one line.
+ * Modifies linearray and linehash through being a closure.
+ * @param {string} text String to encode.
+ * @return {string} Encoded string.
+ * @private
+ */
+ function diffLinesToCharsMunge(text) {
+ var chars, lineStart, lineEnd, lineArrayLength, line;
+ chars = "";
+
+ // Walk the text, pulling out a substring for each line.
+ // text.split('\n') would would temporarily double our memory footprint.
+ // Modifying text would create many large strings to garbage collect.
+ lineStart = 0;
+ lineEnd = -1;
+
+ // Keeping our own length variable is faster than looking it up.
+ lineArrayLength = lineArray.length;
+ while (lineEnd < text.length - 1) {
+ lineEnd = text.indexOf("\n", lineStart);
+ if (lineEnd === -1) {
+ lineEnd = text.length - 1;
+ }
+ line = text.substring(lineStart, lineEnd + 1);
+ lineStart = lineEnd + 1;
+
+ var lineHashExists = lineHash.hasOwnProperty ? lineHash.hasOwnProperty(line) : lineHash[line] !== undefined;
+
+ if (lineHashExists) {
+ chars += String.fromCharCode(lineHash[line]);
+ } else {
+ chars += String.fromCharCode(lineArrayLength);
+ lineHash[line] = lineArrayLength;
+ lineArray[lineArrayLength++] = line;
+ }
+ }
+ return chars;
+ }
+
+ chars1 = diffLinesToCharsMunge(text1);
+ chars2 = diffLinesToCharsMunge(text2);
+ return {
+ chars1: chars1,
+ chars2: chars2,
+ lineArray: lineArray
+ };
+ };
+
+ /**
+ * Rehydrate the text in a diff from a string of line hashes to real lines of
+ * text.
+ * @param {!Array.} diffs Array of diff tuples.
+ * @param {!Array.} lineArray Array of unique strings.
+ * @private
+ */
+ DiffMatchPatch.prototype.diffCharsToLines = function (diffs, lineArray) {
+ var x, chars, text, y;
+ for (x = 0; x < diffs.length; x++) {
+ chars = diffs[x][1];
+ text = [];
+ for (y = 0; y < chars.length; y++) {
+ text[y] = lineArray[chars.charCodeAt(y)];
+ }
+ diffs[x][1] = text.join("");
+ }
+ };
+
+ /**
+ * Reorder and merge like edit sections. Merge equalities.
+ * Any edit section can move as long as it doesn't cross an equality.
+ * @param {!Array.} diffs Array of diff tuples.
+ */
+ DiffMatchPatch.prototype.diffCleanupMerge = function (diffs) {
+ var pointer, countDelete, countInsert, textInsert, textDelete, commonlength, changes, diffPointer, position;
+ diffs.push([DIFF_EQUAL, ""]); // Add a dummy entry at the end.
+ pointer = 0;
+ countDelete = 0;
+ countInsert = 0;
+ textDelete = "";
+ textInsert = "";
+
+ while (pointer < diffs.length) {
+ switch (diffs[pointer][0]) {
+ case DIFF_INSERT:
+ countInsert++;
+ textInsert += diffs[pointer][1];
+ pointer++;
+ break;
+ case DIFF_DELETE:
+ countDelete++;
+ textDelete += diffs[pointer][1];
+ pointer++;
+ break;
+ case DIFF_EQUAL:
+
+ // Upon reaching an equality, check for prior redundancies.
+ if (countDelete + countInsert > 1) {
+ if (countDelete !== 0 && countInsert !== 0) {
+
+ // Factor out any common prefixes.
+ commonlength = this.diffCommonPrefix(textInsert, textDelete);
+ if (commonlength !== 0) {
+ if (pointer - countDelete - countInsert > 0 && diffs[pointer - countDelete - countInsert - 1][0] === DIFF_EQUAL) {
+ diffs[pointer - countDelete - countInsert - 1][1] += textInsert.substring(0, commonlength);
+ } else {
+ diffs.splice(0, 0, [DIFF_EQUAL, textInsert.substring(0, commonlength)]);
+ pointer++;
+ }
+ textInsert = textInsert.substring(commonlength);
+ textDelete = textDelete.substring(commonlength);
+ }
+
+ // Factor out any common suffixies.
+ commonlength = this.diffCommonSuffix(textInsert, textDelete);
+ if (commonlength !== 0) {
+ diffs[pointer][1] = textInsert.substring(textInsert.length - commonlength) + diffs[pointer][1];
+ textInsert = textInsert.substring(0, textInsert.length - commonlength);
+ textDelete = textDelete.substring(0, textDelete.length - commonlength);
+ }
+ }
+
+ // Delete the offending records and add the merged ones.
+ if (countDelete === 0) {
+ diffs.splice(pointer - countInsert, countDelete + countInsert, [DIFF_INSERT, textInsert]);
+ } else if (countInsert === 0) {
+ diffs.splice(pointer - countDelete, countDelete + countInsert, [DIFF_DELETE, textDelete]);
+ } else {
+ diffs.splice(pointer - countDelete - countInsert, countDelete + countInsert, [DIFF_DELETE, textDelete], [DIFF_INSERT, textInsert]);
+ }
+ pointer = pointer - countDelete - countInsert + (countDelete ? 1 : 0) + (countInsert ? 1 : 0) + 1;
+ } else if (pointer !== 0 && diffs[pointer - 1][0] === DIFF_EQUAL) {
+
+ // Merge this equality with the previous one.
+ diffs[pointer - 1][1] += diffs[pointer][1];
+ diffs.splice(pointer, 1);
+ } else {
+ pointer++;
+ }
+ countInsert = 0;
+ countDelete = 0;
+ textDelete = "";
+ textInsert = "";
+ break;
+ }
+ }
+ if (diffs[diffs.length - 1][1] === "") {
+ diffs.pop(); // Remove the dummy entry at the end.
+ }
+
+ // Second pass: look for single edits surrounded on both sides by equalities
+ // which can be shifted sideways to eliminate an equality.
+ // e.g: ABAC -> ABAC
+ changes = false;
+ pointer = 1;
+
+ // Intentionally ignore the first and last element (don't need checking).
+ while (pointer < diffs.length - 1) {
+ if (diffs[pointer - 1][0] === DIFF_EQUAL && diffs[pointer + 1][0] === DIFF_EQUAL) {
+
+ diffPointer = diffs[pointer][1];
+ position = diffPointer.substring(diffPointer.length - diffs[pointer - 1][1].length);
+
+ // This is a single edit surrounded by equalities.
+ if (position === diffs[pointer - 1][1]) {
+
+ // Shift the edit over the previous equality.
+ diffs[pointer][1] = diffs[pointer - 1][1] + diffs[pointer][1].substring(0, diffs[pointer][1].length - diffs[pointer - 1][1].length);
+ diffs[pointer + 1][1] = diffs[pointer - 1][1] + diffs[pointer + 1][1];
+ diffs.splice(pointer - 1, 1);
+ changes = true;
+ } else if (diffPointer.substring(0, diffs[pointer + 1][1].length) === diffs[pointer + 1][1]) {
+
+ // Shift the edit over the next equality.
+ diffs[pointer - 1][1] += diffs[pointer + 1][1];
+ diffs[pointer][1] = diffs[pointer][1].substring(diffs[pointer + 1][1].length) + diffs[pointer + 1][1];
+ diffs.splice(pointer + 1, 1);
+ changes = true;
+ }
+ }
+ pointer++;
+ }
+
+ // If shifts were made, the diff needs reordering and another shift sweep.
+ if (changes) {
+ this.diffCleanupMerge(diffs);
+ }
+ };
+
+ return function (o, n) {
+ var diff, output, text;
+ diff = new DiffMatchPatch();
+ output = diff.DiffMain(o, n);
+ diff.diffCleanupEfficiency(output);
+ text = diff.diffPrettyHtml(output);
+
+ return text;
+ };
+ }();
+
+}((function() { return this; }())));
diff --git a/app/www/static/js/spin.min.js b/app/www/static/js/spin.min.js
new file mode 100644
index 0000000..bd3ae4f
--- /dev/null
+++ b/app/www/static/js/spin.min.js
@@ -0,0 +1,2 @@
+// http://spin.js.org/#v2.3.2
+!function(a,b){"object"==typeof module&&module.exports?module.exports=b():"function"==typeof define&&define.amd?define(b):a.Spinner=b()}(this,function(){"use strict";function a(a,b){var c,d=document.createElement(a||"div");for(c in b)d[c]=b[c];return d}function b(a){for(var b=1,c=arguments.length;c>b;b++)a.appendChild(arguments[b]);return a}function c(a,b,c,d){var e=["opacity",b,~~(100*a),c,d].join("-"),f=.01+c/d*100,g=Math.max(1-(1-a)/b*(100-f),a),h=j.substring(0,j.indexOf("Animation")).toLowerCase(),i=h&&"-"+h+"-"||"";return m[e]||(k.insertRule("@"+i+"keyframes "+e+"{0%{opacity:"+g+"}"+f+"%{opacity:"+a+"}"+(f+.01)+"%{opacity:1}"+(f+b)%100+"%{opacity:"+a+"}100%{opacity:"+g+"}}",k.cssRules.length),m[e]=1),e}function d(a,b){var c,d,e=a.style;if(b=b.charAt(0).toUpperCase()+b.slice(1),void 0!==e[b])return b;for(d=0;d',c)}k.addRule(".spin-vml","behavior:url(#default#VML)"),h.prototype.lines=function(a,d){function f(){return e(c("group",{coordsize:k+" "+k,coordorigin:-j+" "+-j}),{width:k,height:k})}function h(a,h,i){b(m,b(e(f(),{rotation:360/d.lines*a+"deg",left:~~h}),b(e(c("roundrect",{arcsize:d.corners}),{width:j,height:d.scale*d.width,left:d.scale*d.radius,top:-d.scale*d.width>>1,filter:i}),c("fill",{color:g(d.color,a),opacity:d.opacity}),c("stroke",{opacity:0}))))}var i,j=d.scale*(d.length+d.width),k=2*d.scale*j,l=-(d.width+d.length)*d.scale*2+"px",m=e(f(),{position:"absolute",top:l,left:l});if(d.shadow)for(i=1;i<=d.lines;i++)h(i,-2,"progid:DXImageTransform.Microsoft.Blur(pixelradius=2,makeshadow=1,shadowopacity=.3)");for(i=1;i<=d.lines;i++)h(i);return b(a,m)},h.prototype.opacity=function(a,b,c,d){var e=a.firstChild;d=d.shadow&&d.lines||0,e&&b+d>1)+"px"})}for(var i,k=0,l=(f.lines-1)*(1-f.direction)/2;k
+
+
+
+
+ INTVAL3 client tests
+
+
+
+
+
+
+
+
+
+
\ No newline at end of file
diff --git a/app/www/test/tests.js b/app/www/test/tests.js
new file mode 100644
index 0000000..feed35c
--- /dev/null
+++ b/app/www/test/tests.js
@@ -0,0 +1,3 @@
+QUnit.test('hello world', function (assert) {
+ assert.ok(true, 'this is ok')
+})
\ No newline at end of file
diff --git a/conf/network_interfaces.conf b/conf/network_interfaces.conf
new file mode 100644
index 0000000..964c342
--- /dev/null
+++ b/conf/network_interfaces.conf
@@ -0,0 +1,24 @@
+# interfaces(5) file used by ifup(8) and ifdown(8)
+
+# Please note that this file is written to be used with dhcpcd
+# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
+
+# Include files from /etc/network/interfaces.d:
+source-directory /etc/network/interfaces.d
+
+auto lo
+iface lo inet loopback
+
+iface eth0 inet manual
+
+auto wlan0
+allow-hotplug wlan0
+iface wlan0 inet manual
+ wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
+ wireless-power off
+
+auto wlan1
+allow-hotplug wlan1
+iface wlan1 inet manual
+ wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
+ wireless-power off
\ No newline at end of file
diff --git a/conf/nginx.conf b/conf/nginx.conf
new file mode 100644
index 0000000..58e9370
--- /dev/null
+++ b/conf/nginx.conf
@@ -0,0 +1,28 @@
+#blootstrap nginx conf
+
+server {
+ listen 80 default_server;
+ server_name _;
+
+ location / {
+ proxy_pass http://127.0.0.1:6699/;
+ proxy_set_header Host $host;
+ proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+ proxy_set_header X-Real-IP $remote_addr;
+ #gzip on;
+ #gzip_comp_level 5;
+ #gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript application/json;
+ }
+ #uncomment for static file server
+ location /static/ {
+ #uncomment to turn on caching
+ #expires modified 1y;
+ #access_log off;
+ #add_header Cache-Control "public";
+ #gzip on;
+ #gzip_comp_level 5;
+ #gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript application/json;
+ #use project location
+ alias /home/pi/intval3/app/www/static/;
+ }
+}
diff --git a/dev.sh b/dev.sh
new file mode 100644
index 0000000..60ecb6e
--- /dev/null
+++ b/dev.sh
@@ -0,0 +1,14 @@
+#!/bin/bash
+
+echo "Starting in dev mode"
+
+rm run_dev.sh
+jq -r ".apps[0].env | keys[]" ./process.json | while read key ; do
+ echo -n "$key=\"">> run_dev.sh
+ echo -n "$(jq ".apps[0].env.$key" ./process.json)" >> run_dev.sh
+ echo -n "\" ">> run_dev.sh
+done
+echo -n " node ." >> run_dev.sh
+
+#cat run_dev.sh
+sh run_dev.sh
\ No newline at end of file
diff --git a/docs.sh b/docs.sh
new file mode 100644
index 0000000..a4c254c
--- /dev/null
+++ b/docs.sh
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+libs="./lib/*"
+for l in $libs
+do
+ echo "Generating documentation for $l"
+ ./node_modules/.bin/jsdoc2md $l/index.js > $l/Readme.md
+done
\ No newline at end of file
diff --git a/experiments/curl_endpoints.sh b/experiments/curl_endpoints.sh
new file mode 100644
index 0000000..7ee31b2
--- /dev/null
+++ b/experiments/curl_endpoints.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+curl -H "Content-Type: application/json" -X POST -d '{"dir" : false }' http://localhost:6699/dir
\ No newline at end of file
diff --git a/experiments/gpio.js b/experiments/gpio.js
new file mode 100644
index 0000000..b2ffbb3
--- /dev/null
+++ b/experiments/gpio.js
@@ -0,0 +1,118 @@
+'use strict'
+
+const Gpio = require('onoff').Gpio
+
+let release
+let micro
+let fwd
+let bwd
+
+process.on('SIGINT', () => {
+ if (fwd && fwd.writeSync) {
+ console.log(`Setting fwd to 0`)
+ fwd.writeSync(0)
+ }
+ if (bwd && bwd.writeSync) {
+ console.log(`Setting bwd to 0`)
+ bwd.writeSync(0)
+ }
+ process.exit()
+})
+
+function releaseTest () {
+ const PIN = 6
+ release = Gpio(PIN, 'in', 'both')
+ console.log(`Watching input on GPIO 0${PIN}`)
+ let saveTime = 0
+ let active = false
+ release.watch((err, val) => {
+ const NOW = +new Date()
+ /* Button + 10K ohm resistor */
+ /* 1 = open */
+ /* 0 = closed */
+ if (err) {
+ return console.error(err)
+ }
+ //console.log(`Release switch val: ${val}`)
+ //console.log(`RELEASE: ${val} ${active} ${NOW} ${saveTime}`)
+ if (val === 0) {
+ //console.log('closed')
+ } else if (val === 1) {
+ //console.log('open')
+ }
+ if (val === 0) {
+ //closed
+ if ((!active && saveTime === 0) || (active && NOW - saveTime > 10 * 1000)) {
+ saveTime = NOW
+ active = true //maybe unncecessary
+ } else {
+ //saveTime = 0
+ //active = false
+ }
+ } else if (val === 1) {
+ //open
+ if (active) {
+ if (NOW - saveTime > 50 && NOW - saveTime < 1000) {
+ console.log('Started Frame')
+ } else if (NOW - saveTime >= 1000) {
+ console.log('Started Sequence')
+ }
+ //console.log(`Release closed for ${NOW - saveTime}`)
+ saveTime = 0
+ active = false
+ }
+ }
+ })
+}
+
+function microTest () {
+ const PIN = 5
+ micro = Gpio(PIN, 'in', 'both')
+ console.log(`Watching input on GPIO 0${PIN}`)
+ let saveTime = 0
+ let frameActive = true //this._state.frame.active
+ let primed = false //this._state.primed
+ micro.watch((err, val) => {
+ const NOW = +new Date()
+ if (err) {
+ return console.error(err)
+ }
+ console.log(`Micro switch val: ${val}`)
+ if (val === 0) {
+ //console.log('closed')
+ } else if (val === 1) {
+ //console.log('open')
+ }
+ if (val === 0 && frameActive) {
+ if (!primed) {
+ primed = true
+ saveTime = NOW
+ console.log('Primed')
+ }
+ } else if (val === 1 && frameActive) {
+ if (primed) {
+ primed = false
+ setTimeout( () => {
+ console.log(`Stop Frame after ${NOW - saveTime}`)
+ }, 10)
+ }
+ }
+ })
+}
+
+//test stepping up of 3.3V RPI logic via
+//Sparkfun PRT-10968 (NPC1402)
+function stepupTest () {
+ const FWD = 13 // RPIO PIN 13
+ const BWD = 19
+ fwd = Gpio(FWD, 'out')
+ bwd = Gpio(BWD, 'out')
+
+ console.log(`Setting pin ${BWD} high`)
+ fwd.writeSync(0)
+ bwd.writeSync(1)
+}
+
+releaseTest()
+microTest()
+//stepupTest()
diff --git a/experiments/mscript.js b/experiments/mscript.js
new file mode 100644
index 0000000..8a9f777
--- /dev/null
+++ b/experiments/mscript.js
@@ -0,0 +1,169 @@
+'use strict'
+const log = require('../lib/log')('mscript-tests')
+const mscript = require('../lib/mscript')
+//TODO: rewrite for mocha
+
+const tests = function tests () {
+ log.info('Running mscript tests')
+ console.time('Tests took')
+
+ mscript.alts_unique(); //perform check only during tests
+ var fail = function (script, obj) {
+ log.error('...Failed :(')
+ log.error('script', script)
+ log.error('err', obj)
+ process.exit(1)
+ }
+ let script =
+`CF
+PF
+CB
+PB
+BF
+BB`
+ log.info('Basic function test...');
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 0
+ && obj.proj === 0
+ && obj.arr.length === 6) {
+ log.info('...Passed!')
+ } else {
+ fail(script, obj)
+ }
+ })
+
+ script =
+`CF
+PF
+CB
+PB
+BF
+BB`
+ log.info('Functions with integers test...')
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 0
+ && obj.proj === 0
+ && obj.arr.length === 6) {
+ log.info('...Passed!')
+ } else {
+ fail(script, obj)
+ }
+ })
+
+ script =
+`CF 1000
+CB 1000
+SET PROJ 200
+PB 200`
+ log.info('Basic state test...')
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 0
+ && obj.proj === 0) {
+ log.info('...Passed!')
+ } else {
+ fail(script, obj)
+ }
+ })
+
+ script =
+`LOOP 10
+CF 3
+PF 1
+END LOOP`
+ log.info('Basic loop test...')
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 30
+ && obj.proj === 10
+ && obj.arr.length === 40) {
+ log.info('...Passed!')
+ } else {
+ fail(script, obj)
+ }
+ });
+
+ script = `LOOP 4\nLOOP 4\nPF\nBF\nEND LOOP\nEND LOOP`
+ log.info('Recursive loop test...');
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 16
+ && obj.proj === 16
+ && obj.arr.length === 32) {
+ log.info('...Passed!');
+ } else {
+ fail(script, obj);
+ }
+ });
+
+ //Lighting tests
+ script = `L 255,255,255\nCF\nPF`
+ log.info('Basic light test...');
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 1
+ && obj.proj === 1
+ && obj.arr.length === 2
+ && obj.light.length === 2
+ && obj.light[0] === '255,255,255'
+ && obj.light[1] === '') {
+ log.info('...Passed!');
+ } else {
+ fail(script, obj);
+ }
+ });
+ script = 'L 255,255,255\nCF\nPF\nBF';
+ log.info('Basic black test...');
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 2
+ && obj.proj === 1
+ && obj.arr.length === 3
+ && obj.light.length === 3
+ && obj.light[0] === '255,255,255'
+ && obj.light[1] === ''
+ && obj.light[2] === mscript.black) {
+ log.info('...Passed!');
+ } else {
+ fail(script, obj);
+ }
+ });
+ script = 'LOOP 2\nL 1,1,1\nCF\nL 2,2,2\nCF\nEND';
+ log.info('Basic light loop test...');
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 4
+ && obj.proj === 0
+ && obj.arr.length === 4
+ && obj.light.length === 4
+ && obj.light[0] === '1,1,1'
+ && obj.light[3] === '2,2,2') {
+ log.info('...Passed!');
+ } else {
+ fail(script, obj);
+ }
+ });
+
+ //LOOP W/ CAM and PROJ
+ script = 'LOOP 2\nCAM 4\nPROJ 4\nEND';
+ log.info('Basic cam/proj loop test...');
+ mscript.interpret(script, function (obj) {
+ if (obj.success === true
+ && obj.cam === 8
+ && obj.proj === 8
+ && obj.arr.length === 16
+ && obj.light.length === 16
+ && obj.light[0] === mscript.black) {
+ log.info('...Passed!');
+ } else {
+ fail(script, obj);
+ }
+ });
+
+ log.info('All tests completed');
+ console.timeEnd('Tests took');
+}
+
+tests()
\ No newline at end of file
diff --git a/experiments/wifi.js b/experiments/wifi.js
new file mode 100644
index 0000000..d92fb8e
--- /dev/null
+++ b/experiments/wifi.js
@@ -0,0 +1,4 @@
+'use strict'
+
+const log = require('../lib/log')('wifi-tests')
+const wifi = require('../lib/wifi')
diff --git a/hardware/case.scad b/hardware/case.scad
new file mode 100644
index 0000000..01edace
--- /dev/null
+++ b/hardware/case.scad
@@ -0,0 +1,466 @@
+include <./modules.scad>
+include <./variables.scad>
+
+module l289N_holes (r = 3/2 - .2) {
+ $fn = 60;
+ DISTANCE = 36.5;
+ H = 50;
+ translate([0, 0, 0]) cylinder(r = r, h = H * 5, center = true);
+ translate([DISTANCE, 0, 0]) cylinder(r = r, h = H * 5, center = true);
+ translate([DISTANCE, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
+ translate([0, DISTANCE, 0]) cylinder(r = r, h = H * 5, center = true);
+}
+
+module l289N_hole_test () {
+ $fn = 40;
+ difference () {
+ cube([140, 40, 3], center = true);
+ cylinder(r = 3/2, h = 50, center = true);
+ translate([7, 0, 0]) cylinder(r = 3/2, h = 50, center = true);
+ translate([7 * 2, 0, 0]) cylinder(r = 3/2 - .1, h = 50, center = true);
+ translate([7 * 3, 0, 0]) cylinder(r = 3/2 - .2, h = 50, center = true);
+ translate([7 * 4, 0, 0]) cylinder(r = 3/2 - .3, h = 50, center = true);
+ }
+}
+
+module intval_panel_laser () {
+ $fn = 40;
+ difference () {
+ union () {
+ difference () {
+ translate ([0, 0, 8.5]) {
+ union () {
+ translate([12 - 10, , 0]) {
+ rotate([0, 0, -13]) {
+ rounded_cube([panel_2_x + 20 + 20, panel_2_y, 25.4/8], d = 20, center = true);
+ }
+ }
+ //reinforces
+ //translate([54, -12, -3]) rotate([0, 0, 89]) rounded_cube([110, 20, 4], 20, center = true);
+ //translate([-17, 2, -3]) rotate([0, 0, 72]) rounded_cube([94, 13, 4], 13, center = true);
+ }
+ }
+ for (i = [0 : len(xArray) - 1]) {
+ bolex_pin_inner_laser(xArray[i], yArray[i]);
+ }
+ }
+ //onetoone(26, 10, 4.5);
+ //extends for onetoone
+
+
+ }
+ //onetoone(9, 14, 8.5);
+ bearing_laser(54.5, 12, 6, width= 18, hole=false);
+ translate([-38, -1, 0]) rotate([0, 0, -13]) l289N_holes();
+ //translate ([6, -9, height + 3.5]) cylinder(r = bolt_inner, h = 50, center = true); //cover standoff hole
+ //frame_counter_access(); //use the space
+ m_p_access();
+ remove_front();
+ translate([6, 18, 0]) rotate([0, 0, -13]) cube([15, 25, 40], center=true); //motor wind key hole
+
+ for (i = [0 : len(mm_x) - 1]) {
+ translate([mm_x[i], mm_y[i], 0]) cylinder(r = bolt_inner, h = 100, center = true);
+ }
+ translate([0, 0, .25]) intval_laser_panel_cover();
+ translate([-35, -24, 15]) rotate([0, 0, -13]) {
+ translate([58 / 2, 23 / 2, 0]) cylinder(r = 3/2 - .2, h = 30, center = true, $fn = 20);
+ translate([-58 / 2, 23 / 2, 0]) cylinder(r = 3/2 - .2, h = 30, center = true, $fn = 20);
+ translate([58 / 2, -23 / 2, 0]) cylinder(r = 3/2 - .2, h = 30, center = true, $fn = 20);
+ translate([-58 / 2, -23 / 2, 0]) cylinder(r = 3/2 - .2, h = 30, center = true, $fn = 20);
+ }
+ }
+
+}
+
+module intval_panel_laser_debug () {
+ $fn = 40;
+ difference () {
+ union () {
+ difference () {
+ translate ([0, 0, 8.5]) {
+ union () {
+ translate([12 - 32.5, -5 + 9, 0]) {
+ rotate([0, 0, -13]) {
+ rounded_cube([panel_2_x + 20 + 65, panel_2_y, 25.4/8], d = 20, center = true);
+ }
+ }
+ //reinforces
+ //translate([54, -12, -3]) rotate([0, 0, 89]) rounded_cube([110, 20, 4], 20, center = true);
+ //translate([-17, 2, -3]) rotate([0, 0, 72]) rounded_cube([94, 13, 4], 13, center = true);
+ }
+ }
+ for (i = [0 : len(xArray) - 1]) {
+ bolex_pin_inner_laser(xArray[i], yArray[i]);
+ }
+ }
+ //onetoone(26, 10, 4.5);
+ //extends for onetoone
+
+
+ }
+ //onetoone(9, 14, 8.5);
+ bearing_laser(54.5, 12, 6, width= 18, hole=false);
+ translate([-38, -1, 0]) rotate([0, 0, -13]) l289N_holes();
+ //translate ([6, -9, height + 3.5]) cylinder(r = bolt_inner, h = 50, center = true); //cover standoff hole
+ //frame_counter_access(); //use the space
+ m_p_access();
+ remove_front();
+ translate([6, 18, 0]) rotate([0, 0, -13]) cube([15, 25, 40], center=true); //motor wind key hole
+
+ for (i = [0 : len(mm_x) - 1]) {
+ translate([mm_x[i], mm_y[i], 0]) cylinder(r = bolt_inner, h = 100, center = true);
+ }
+ intval_laser_panel_cover(DEBUG = true);
+ translate ([4, 12, 0]) {
+ translate([-51.5, -8.5, 0]) cylinder(r = 2.8/2, h = 100, center = true);
+ translate([-51.5 - 66, -8.5 + 15, 0]) cylinder(r = 2.8/2, h = 100, center = true);
+ translate([-51.5 + 11.5, -8 + 49, 0]) cylinder(r = 2.8/2, h = 100, center = true);
+ translate([-51.5 - 54.5, -8.5 + 49 + 16, 0]) cylinder(r = 2.8/2, h = 100, center = true);
+ }
+ }
+}
+
+module bolex_pin_laser (x, y) {
+ in = innerD;
+ $fn = 120;
+ translate ([x, y, 1]) {
+ difference () {
+ union () {
+ translate([0, 0, (height / 2) - 3]) cylinder(r = (outerD + 5) / 2, h = 2, center = true);
+ translate([0, 0, 1.175/2]) cylinder(r = outerD / 2, h = height + 1.175 , center = true);
+ }
+ cylinder(r = in / 2, h = height * 2, center = true);
+ translate([0, 0, (height / 2) - 1.9]) cylinder(r1 =4.5 / 2, r2 = 6.7 / 2, h = 2, center = true);
+ translate([0, 0, (height / 2) + 1]) cylinder(r = 6.7 / 2, h = 4, center = true);
+ }
+ }
+}
+
+module intval_laser_standoffs () {
+ $fn = 40;
+ for (i = [0 : len(xArray) - 1]) {
+ bolex_pin_laser(xArray[i], yArray[i]);
+ }
+}
+
+module intval_laser_standoffs_plate () {
+ $fn = 40;
+ rotate ([0, 180, 0]) {
+ bolex_pin_laser(0, 0);
+ bolex_pin_laser(15, 0);
+ bolex_pin_laser(0, 15);
+ bolex_pin_laser(15, 15);
+ }
+ //decoys
+ //translate([7, 7, 0]) decoys(23, 5.5, 6);
+}
+
+module bolex_pin_inner_laser (x, y) {
+ $fn = 40;
+ //innerD = 6.75;
+ innerD = 9;
+ translate ([x, y, 1]) {
+ cylinder(r = innerD / 2, h = height * 2, center = true);
+ //translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
+ }
+}
+
+module bearing_laser (x, y, z, width= 8, hole = true) {
+ innerD = 8.05;
+ outerD = 22.1 - .4;
+ fuzz = 0.1;
+ translate ([x, y, z]) {
+ difference () {
+ cylinder(r = outerD / 2 + fuzz, h = width, center = true);
+ if (hole) {
+ cylinder(r = innerD / 2 - fuzz, h = width, center = true);
+ }
+ }
+ }
+}
+
+module intval_laser_panel_cover (LASER = false, DEBUG = false, ALL_RED = false) {
+ $fn = 60;
+ cover_h = 16 + 3 + 4 + 10;
+ MATERIAL = 25.4 / 8;
+
+ module top () {
+ difference () {
+ rotate([0, 0, -13]) {
+ translate([-10, 0, 0]) rounded_cube([120, panel_2_y, MATERIAL], d = 20, center = true);
+ }
+ translate([53, 12, 0]) cylinder(r = 30, h = 60, center = true); //hole for motor mount
+ translate([22, 20, 0]) cylinder(r = 8, h = 60, center = true); // hole for moto mount bolt holder
+ translate([53, 42, 0]) cylinder(r = 15, h = 60, center = true); //removes pointy part
+
+ translate([-44 - 20, 8 + 5, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([0, 90, 0]) back_side();
+ translate([2, 49, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([90, 0, 0]) top_side();
+ translate([-22, -45, -(cover_h / 2 ) - MATERIAL - 1]) rotate([0, 0, -13]) rotate([90, 0, 0]) bottom_side();
+ translate([xArray[0], yArray[0], 0]) cylinder(r = 7 / 2, h = height * 20, center = true); //top standoff access
+ translate ([8, -9, height + 3.5]) cylinder(r = bolt_inner - .5, h = 50, center = true); //bottom mount attach
+ }
+
+ }
+ module back_side () {
+ difference () {
+ translate([0, 1.75, 0]) cube([cover_h + 2 + (MATERIAL * 2) + 1 + 3, panel_2_y - 10, MATERIAL], center = true);
+ //top negatives (strange)
+ translate([-(cover_h / 2) - (MATERIAL * 1.5), 20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
+ translate([-(cover_h / 2) - (MATERIAL * 1.5), -20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
+
+ translate([-(cover_h / 2) - (MATERIAL * 1.5), 47, 0]) cube([MATERIAL, 10, MATERIAL], center = true);
+ translate([-(cover_h / 2) - (MATERIAL * 1.5), -47, 0]) cube([MATERIAL, 10, MATERIAL], center = true);
+
+ //bottom negatives
+ translate([(cover_h / 2) + (MATERIAL * 1.5), 20, 0]) cube([MATERIAL, 20, MATERIAL], center = true);
+ translate([(cover_h / 2) + (MATERIAL * 1.5), -20 - 11, 0]) cube([MATERIAL, 35, MATERIAL], center = true);
+
+ translate([18 , -30 , 0]) cube([10, 15, 30], center = true); //access for microSD
+
+ translate([0, 50.5, 0]) cube([17.5, MATERIAL, MATERIAL], center = true);
+ translate([0, -50.5 + (1.75 / 2) + MATERIAL - 0.25, 0]) cube([17.5, MATERIAL, MATERIAL], center = true);
+ }
+
+ }
+
+ module top_side () {
+ difference () {
+ translate([-2.5 - 10 - 1, 0, 0]) cube([ panel_2_x - 41 + 20, cover_h + 2 + (MATERIAL * 2) + 1 + 3, MATERIAL], center = true);
+ //top and bottom negatives
+ translate([28 - 5, -(cover_h / 2) - (MATERIAL * 1.5), 0]) cube([35, MATERIAL, MATERIAL], center = true);
+ translate([28 - 5, (cover_h / 2) + (MATERIAL * 1.5), 0]) cube([35, MATERIAL, MATERIAL], center = true);
+ translate([-28 - 10 - 2, -(cover_h / 2) - (MATERIAL * 1.5), 0]) cube([30, MATERIAL, MATERIAL], center = true);
+ translate([-28 - 10 - 2, (cover_h / 2) + (MATERIAL * 1.5), 0]) cube([30, MATERIAL, MATERIAL], center = true);
+ //back side negatives
+ translate([-35.5 - 20 - 1, -13 - 8.1, 0]) cube([MATERIAL, 25, MATERIAL], center = true); //side tabs
+ translate([-35.5 - 20 - 1, 13 + 8.1, 0]) cube([MATERIAL, 25, MATERIAL], center = true); //side tabs
+ }
+
+ }
+
+ module bottom_side () {
+ difference () {
+ //main piece
+ translate([.25 - 10 - 1, 0, 0]) cube([ panel_2_x - 39.5 + 20, cover_h + 2 + (MATERIAL * 2) + 1 + 3, MATERIAL], center = true);
+ //top and bottom negatives
+ translate([25 - 27.5, -(cover_h / 2) - (MATERIAL * 1.5), 0]) cube([35, MATERIAL, MATERIAL], center = true);
+ translate([-25 - 29, -(cover_h / 2) - (MATERIAL * 1.5), 0]) cube([30, MATERIAL, MATERIAL], center = true);
+ translate([30, -(cover_h / 2) - (MATERIAL * 1.5), 0]) cube([15, MATERIAL, MATERIAL], center = true);
+ //
+ translate([30, (cover_h / 2) + (MATERIAL * 1.5), 0]) cube([35, MATERIAL, MATERIAL], center = true);
+ translate([-30 - 10 - 2, (cover_h / 2) + (MATERIAL * 1.5), 0]) cube([30, MATERIAL, MATERIAL], center = true);
+
+ //back side negatives
+ translate([-33.5 - 20 - 1, 17.3, 0]) cube([MATERIAL, 17.5, MATERIAL], center = true);
+ translate([-33.5 - 20 - 1, -17.3, 0]) cube([MATERIAL, 17.5, MATERIAL], center = true);
+
+ //hole for audio jack -> add countersink
+ translate([7, 10, 0]) cylinder(r = 6/2, h = 50, center = true);
+ //hole for female DC power jack, 12vdc
+ //translate([-15 - 20, 1 + 5, 0]) cylinder(r = 8/2, h = 20, center = true); //smaller DC jack
+ translate([23, 8, 0]) cylinder(r = 12/2, h = 20, center = true); //larger DC jack
+
+ //usb negative
+ translate([0, -15, 0]) cube([30, 10, 20], center = true);
+
+ }
+
+
+ }
+
+ if (LASER) {
+ projection() top();
+ if (!DEBUG) {
+ translate([-95, 20, 0]) rotate([0, 0, -13]) projection() back_side();
+ }
+ translate([20, 80, 0]) rotate([0, 0, -13]) projection() top_side();
+ translate([-20, -80, 0]) rotate([0, 0, -13]) projection() bottom_side();
+ } else {
+ //translate([0, 0, height + cover_h]) top();
+ if (!DEBUG) {
+ translate([-44 - 20, 8 + 5, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([0, 90, 0]) back_side();
+ }
+ translate([2, 49, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([90, 0, 0]) top_side();
+ translate([-22, -45, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([90, 0, 0]) bottom_side();
+ }
+}
+
+module intval_laser_panel_cover_standoff (DECOYS = false) {
+ tight = 0.2;
+ cover_h = 21;
+ $fn = 40;
+ translate ([6, -9, height + 3.5]) {
+ difference() {
+ cylinder(r = bolt_inner + 1.4, h = cover_h - .5, center = true);
+ cylinder(r = bolt_inner - tight, h = cover_h, center = true);
+ }
+ if (DECOYS) {
+ decoys(12, -(cover_h / 2) + 2);
+ }
+ }
+}
+
+module remove_front () {
+
+ translate([87, 0, 4]) rotate([0, 0, 89]) cube([170, 40, 40], center = true);
+}
+module onetoone (size, height, z) {
+ translate ([one_to_one_x, one_to_one_y, z]) {
+ cylinder(r = size / 2, h = height, center = true);
+ }
+}
+module m_p_access () {
+ translate ([18, -44, 0]) {
+ rounded_cube([35, 17, 50], 17, true);
+ }
+}
+module bolex_pin (x, y) {
+ in = innerD;
+ translate ([x, y, 1]) {
+ difference () {
+ union () {
+ translate([0, 0, (height / 2) - 2]) cylinder(r = (outerD + 4) / 2, h = 4, center = true);
+ cylinder(r = outerD / 2, h = height, center = true);
+ }
+ cylinder(r = in / 2, h = height, center = true);
+ translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
+ }
+ }
+}
+module bolex_pin_inner (x, y) {
+ translate ([x, y, 1]) {
+ cylinder(r = innerD / 2, h = height * 2, center = true);
+ translate([0, 0, (height / 2) - 1]) cylinder(r1 =4.5 / 2, r2 = 6.5 / 2, h = 2, center = true);
+ }
+}
+module intval_pins () {
+ for (i = [0 : len(xArray) - 1]) {
+ bolex_pin(xArray[i], yArray[i]);
+ }
+}
+module key () {
+ tighten = 0.25;
+ difference () {
+ cylinder(r = 6.7 / 2, h = 5, center = true);
+ cylinder(r = (4.76 -+ tighten) / 2, h = 5, center = true);
+ }
+ translate ([0, 0, -7.5]) {
+ cylinder(r = 6.7 / 2, h = 10, center = true);
+ }
+}
+module keyHole () {
+ translate ([0, 0, 1.75]) {
+ cube([10, 2, 3.5], center = true);
+ }
+}
+module key_end (rotArr = [0, 0, 0], transArr = [0, 0, 0], ALT = false) {
+ translate(transArr) {
+ rotate (rotArr) {
+ difference () {
+ key();
+ keyHole();
+ if (ALT) {
+ translate([-2.5, 0, 1.75]) cube([5, 3, 3.5], center= true);
+ }
+ }
+
+ }
+ }
+}
+module frame_counter_access () {
+ x = 37.5;
+ y = 39;
+ translate([x, y, 8.5]) {
+ difference () {
+ union () {
+ rotate ([0, 0, 19]) {
+ translate([0, 9, 0]) {
+ cube([12, 16, 4], center = true);
+ }
+ }
+ rotate ([0, 0, -19]) {
+ translate([0, 9, 0]) {
+ cube([12, 16, 4], center = true);
+ }
+ }
+ }
+ translate([0, 15.5, 0]) {
+ cube([17, 6, 4], center = true);
+ }
+ }
+ cylinder(r = 6.2, h = 4, center = true);
+ }
+}
+module bearing (x, y, z, width= 8, hole = true, calval = 0) {
+ innerD = 8.05;
+ outerD = 22.1;
+ fuzz = 0.1;
+ translate ([x, y, z]) {
+ difference () {
+ cylinder(r = outerD / 2 + fuzz + calval, h = width, center = true);
+ if (hole) {
+ cylinder(r = innerD / 2 - fuzz, h = width, center = true);
+ }
+ }
+ }
+}
+
+module key_cap () {
+ $fn = 60;
+ thickness = .75;
+ innerD = 22.1;
+ outerD = innerD + (thickness * 2);
+ h = 18 - 2.5;
+
+ difference () {
+ cylinder(r = outerD / 2, h = h, center = true);
+ translate([0, 0, -1.01]) cylinder(r = innerD / 2, h = h - thickness, center = true);
+ //translate([100, 0, 0]) cube([200, 200, 200], center = true);
+ }
+ //decoys(23, 7);
+}
+
+module motor_cap_120 (HALF = false) {
+ $fn = 60;
+ base_d = 47;
+ base_inner = 29;
+ inner_h = 57;
+ difference () {
+ union () {
+ translate([-6, 0, 24]) cylinder(r = base_d/2, h = 15, center = true);
+ translate([0, 0, inner_h]) cylinder(r=(base_inner / 2) + 3, h=inner_h, center = true);
+ }
+ translate([-6, 0, -5.75]) cylinder(r = base_d/2 - 1, h = 50, center = true); //to grip edge of
+ translate([-6, 0, 3]) cylinder(r = base_d/2 - 3, h = 50, center = true);
+ translate([-25, 0, 19]) cube([10, 10, 15], center = true); //wire access
+
+ //120 motor
+
+ translate([0, 0, inner_h - 2]) cylinder(r=base_inner / 2, h=inner_h, center = true); //inner cylinder
+
+ if (HALF){
+ translate([100, 0, 0]) cube([200, 200, 200], center = true);
+ }
+ }
+}
+
+module bearing_calibrate (val = 0) {
+ mat = 25.4/8;
+ difference () {
+ cube([40, 40, mat], center = true);
+ bearing(0, 0, 0, hole = false, calval = val);
+ }
+}
+
+/*
+//rpi zero w
+translate([-35, -24, 15]) rotate([0, 0, -13]) {
+ difference () {
+ cube([67, 31, 3], center = true);
+ translate([58 / 2, 23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true, $fn = 20);
+ translate([-58 / 2, 23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true, $fn = 20);
+ translate([58 / 2, -23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true, $fn = 20);
+ translate([-58 / 2, -23 / 2, 0]) cylinder(r = 1.6, h = 3 + 1, center = true, $fn = 20);
+ }
+}
+*/
\ No newline at end of file
diff --git a/hardware/intval3.scad b/hardware/intval3.scad
new file mode 100644
index 0000000..01051c2
--- /dev/null
+++ b/hardware/intval3.scad
@@ -0,0 +1,58 @@
+include <./case.scad>
+include <./mount.scad>
+include <./plunger.scad>
+/*
+
+ INTVAL 3
+
+*/
+
+module stl_plate () {
+ //translate([0, 0, -0.5]) cube([150, 150, 1], center = true);
+ translate([-38, 41, 7.5]) rotate([0, 180, 0]) intval_laser_standoffs_plate();
+ translate([-27, 40, -9.5]) rotate([0, 0, 13]) translate([-40 + 2, -1, 14]) rotate([0, 0, -13]) l289N_mount();
+
+ translate([23, 1, -5.75]) rotate([0, 0, 90]) motor_mount_bottom();
+ translate([48, -13, 9]) rotate([0, 180, 0]) key_cap();
+ translate([-5, -11, 3]) rotate([0, 0, 190]) geared_motor_mount_120();
+ translate([65, 44, 22.5]) rotate([0, 180, 0]) motor_key();
+ translate([0, -42, 15]) plunger_plate();
+ translate([-52, -20, 66]) rotate([0, 180, 0]) motor_cap(false);
+};
+
+module dxf_plate () {
+ translate([125, 0, 0]) rotate([0, 0, 13]) projection() intval_panel_laser();
+ rotate([0, 0, 13]) intval_laser_panel_cover(LASER=true, ALL_RED=true);
+};
+
+module exploded_view () {
+ intval_panel_laser();
+ translate([0, 0, 5]) translate([-40 + 2, -1, 14]) rotate([0, 0, -13]) l289N_mount();
+ translate([0, 0, 5]) motor_mount_bottom();
+ translate([0, 0, 20]) motor_key_120();
+ translate([one_to_one_x, one_to_one_y, 50]) geared_motor_mount_120();
+ translate([one_to_one_x, one_to_one_y, 50]) motor_cap_120(false);
+ translate([0, 0, 60]) intval_laser_panel_cover(false, ALL_RED=true);
+}
+
+
+//bolex_pin_laser(0, 0);
+//intval_laser_standoffs_plate();
+//intval_electronics_mount("METRO");
+//motor_mount_bottom();
+//projection () intval_panel_laser();
+//intval_laser_panel_cover(true, ALL_RED=true);
+//rotate([0, 0, 13]) intval_panel_laser();
+//rotate([0, 0, 13]) intval_laser_panel_cover();
+key_cap();
+//geared_motor_mount_120();
+//motor_key();
+//motor_key_120();
+//plunger_plate();
+//motor_cap(false);
+//motor_cap_120(false);
+//translate([0, 0, 39 / 2 + 5.75]) bolt_guide();
+
+//exploded_view();
+//stl_plate();
+//dxf_plate();
\ No newline at end of file
diff --git a/hardware/intval3_0_prototype.psd b/hardware/intval3_0_prototype.psd
new file mode 100644
index 0000000..8743617
Binary files /dev/null and b/hardware/intval3_0_prototype.psd differ
diff --git a/hardware/intval3_0_prototype_3.psd b/hardware/intval3_0_prototype_3.psd
new file mode 100644
index 0000000..5d649f3
Binary files /dev/null and b/hardware/intval3_0_prototype_3.psd differ
diff --git a/hardware/intval3_0_prototype_4_pads.png b/hardware/intval3_0_prototype_4_pads.png
new file mode 100644
index 0000000..aded10c
Binary files /dev/null and b/hardware/intval3_0_prototype_4_pads.png differ
diff --git a/hardware/intval3_0_prototype_mask.png b/hardware/intval3_0_prototype_mask.png
new file mode 100644
index 0000000..fe78994
Binary files /dev/null and b/hardware/intval3_0_prototype_mask.png differ
diff --git a/hardware/intval3_0_prototype_mask_3.png b/hardware/intval3_0_prototype_mask_3.png
new file mode 100644
index 0000000..7543c3c
Binary files /dev/null and b/hardware/intval3_0_prototype_mask_3.png differ
diff --git a/hardware/intval3_0_prototype_mask_4.png b/hardware/intval3_0_prototype_mask_4.png
new file mode 100644
index 0000000..cf1c5d4
Binary files /dev/null and b/hardware/intval3_0_prototype_mask_4.png differ
diff --git a/hardware/intval_3_prototype.fzz b/hardware/intval_3_prototype.fzz
new file mode 100644
index 0000000..5e325f4
Binary files /dev/null and b/hardware/intval_3_prototype.fzz differ
diff --git a/hardware/intval_3_prototype_etch_copper_top.pdf b/hardware/intval_3_prototype_etch_copper_top.pdf
new file mode 100644
index 0000000..02acaa2
Binary files /dev/null and b/hardware/intval_3_prototype_etch_copper_top.pdf differ
diff --git a/hardware/modules.scad b/hardware/modules.scad
new file mode 100644
index 0000000..471879b
--- /dev/null
+++ b/hardware/modules.scad
@@ -0,0 +1,213 @@
+module tube(o = 1, i = 0, h = 1, center = false, $fn = 12) {
+ $fn = $fn;
+ union () {
+ difference () {
+ cylinder(r = o, h = h, center = center);
+ cylinder(r = i, h = h, center = center);
+ }
+ }
+}
+
+module rounded_cube (cube_arr = [1, 1, 1], d = 0, center = false) {
+ off_x = 0;
+ off_y = 0;
+ r = d/2;
+ union () {
+ cube([cube_arr[0] - d, cube_arr[1], cube_arr[2]], center = center);
+ cube([cube_arr[0], cube_arr[1] - d, cube_arr[2]], center = center);
+ translate ([1 * (cube_arr[0] / 2) - r , 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
+ translate ([-1 * (cube_arr[0] / 2) + r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
+ translate ([1 * (cube_arr[0] / 2) - r, -1 * (cube_arr[1] / 2) + r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
+ translate ([-1 * (cube_arr[0] / 2) + r, 1 * (cube_arr[1] / 2)- r, 0]) cylinder(r = r, h = cube_arr[2], center = center);
+ }
+}
+
+module c_battery () {
+ /* C Cell battery, 26.1 × 50 */
+ x = 26.1;
+ x_fuzz = .3;
+ y = 50;
+ y_fuzz = 2;
+ cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
+}
+
+module sub_c_battery () {
+ /* Sub C Cell battery, 22.2 × 42.9 */
+ x = 22.2;
+ x_fuzz = .3;
+ y = 42.9;
+ y_fuzz = 2;
+ cylinder(r = (x + x_fuzz) / 2, h = y + y_fuzz, center = true);
+}
+
+module hex (r = 1, h = 1, center = false) {
+ cylinder(r = r, h = h, center = center, $fn = 6);
+}
+
+module triangle (a = 1, b = 1, c = 1, h = 1, center = false) {
+
+}
+
+module cone_45 (d = 1, center = false) {
+ cylinder(r1 = d/2, r2 = 0, h = d, center = center);
+}
+
+module decoys (d = 10, z = 0, number = 4, cube_size = 4, debug = false) {
+ for (i = [0: number]) {
+ rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size, cube_size, cube_size], center = true);
+ if (debug && i == 0) {
+ rotate([0, 0, (360/number) * i]) translate([d, 0, z]) cube([cube_size * 5, cube_size* 5, cube_size], center = true);
+ }
+ }
+}
+
+//////////////////////////////////////////////////////////////////////////////////////////////
+// Paraboloid module for OpenScad
+//
+// Copyright (C) 2013 Lochner, Juergen
+// http://www.thingiverse.com/Ablapo/designs
+//
+// This program is free software. It is
+// licensed under the Attribution - Creative Commons license.
+// http://creativecommons.org/licenses/by/3.0/
+//////////////////////////////////////////////////////////////////////////////////////////////
+
+module paraboloid (y=10, f=5, rfa=0, fc=1, detail=44){
+ // y = height of paraboloid
+ // f = focus distance
+ // fc : 1 = center paraboloid in focus point(x=0, y=f); 0 = center paraboloid on top (x=0, y=0)
+ // rfa = radius of the focus area : 0 = point focus
+ // detail = $fn of cone
+
+ hi = (y+2*f)/sqrt(2); // height and radius of the cone -> alpha = 45° -> sin(45°)=1/sqrt(2)
+ x =2*f*sqrt(y/f); // x = half size of parabola
+
+ translate([0,0,-f*fc]) // center on focus
+ rotate_extrude(convexity = 10,$fn=detail ) // extrude paraboild
+ translate([rfa,0,0]) // translate for fokus area
+ difference(){
+ union(){ // adding square for focal area
+ projection(cut = true) // reduce from 3D cone to 2D parabola
+ translate([0,0,f*2]) rotate([45,0,0]) // rotate cone 45° and translate for cutting
+ translate([0,0,-hi/2])cylinder(h= hi, r1=hi, r2=0, center=true, $fn=detail); // center cone on tip
+ translate([-(rfa+x ),0]) square ([rfa+x , y ]); // focal area square
+ }
+ translate([-(2*rfa+x ), -1/2]) square ([rfa+x ,y +1] ); // cut of half at rotation center
+ }
+}
+
+//Spiral Notes
+//-------------------------------------------------------------------
+//Height = center to center height of the end spheres which form the spirals. Ends will need to be flattened by the user as desired. Actual height of the rendering is Height+2*baseRadius
+//Radius = the maximum distance from the axis of the spiral (the z axis) to the center of the sphere(s) forming the spiral
+//baseRadius = cross sectional radius of the spiral
+//frequency = the number of complete revolutions about the axis made by the spiral, whole numbers will result in spirals whose tops end directly above their bases
+//resolution = integer number of spheres, not to be confused with $fn. The greater the number of spheres, the smoother the spiral will be (also longer render times!). Recommended that this number be 8*frequency or greater.
+//numSpirals = integer number of spirals used in the spiralMulti modules spaced evenly around the axis (3 spirals are spaced 120 degrees apart, 4 spirals: 90 degrees apart, etc.)
+
+//Instructions
+//------------------------------------------------------------------
+//1. Place spiral.scad in the "libraries" folder of your openscad installation. Find the libraries folder by File -> Show Library Folder...
+//2. Then create a new or open one of your existing scad files and include spiral.scad with the following code:
+//use;
+//3. Then call the modules in your files with code similar to the following:
+//spiral(20,20,3,1,25);
+//spiralCone(20,20,3,1,25);
+//spiralEllipse(20,20,3,1,25);
+//spiralMulti(20,20,3,1,25,3);
+//spiralMultiCone(20,20,3,1,25,3);
+//spiralMultiEllipse(40,60,3,1,32,3);
+
+//-------------------------------------------------------------
+//simple spiral
+module spiral (height = 20, Radius = 20, baseRadius = 3, frequency = 1, resolution = 25, $fn=50) {
+ union(){
+ translate ([0,0,-(height/2)]) {
+ for(i=[0:resolution-2]){
+ hull(){
+ rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
+ rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
+ }
+ }
+ }
+ }
+}
+
+//cone spiral
+module spiralCone(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25, $fn=50) {
+ union(){
+ translate ([0,0,-(height/2)]) {
+ for(i=[0:resolution-2]){
+ hull(){
+ rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius-(i-1)*Radius/resolution,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
+ rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius-i*Radius/resolution,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
+ }
+ }
+ }
+ }
+}
+
+//ellipse spiral
+module spiralEllipse(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25, $fn=50) {
+ union(){
+ translate ([0,0,-(height/2)]) {
+ for(i=[0:resolution-2]){
+ hull(){
+ rotate ([0,0,frequency*360/(resolution-1)*i]) translate ([Radius*sqrt(1-(i/(resolution-1)*(i/(resolution-1)))),0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
+ rotate ([0,0,frequency*360/(resolution-1)*(i+1)]) translate ([Radius*sqrt(1-((i+1)/(resolution-1)*((i+1)/(resolution-1)))),0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
+ }
+ }
+ }
+ }
+}
+
+// Multiple spirals arranged radially around the axis
+module spiralMulti(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
+ shiftAngle=360/numSpirals;
+ for(total=[0:numSpirals-1]) {
+ union(){
+ translate ([0,0,-(height/2)]) {
+ for(i=[0:resolution-2]){
+ hull(){
+ rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
+ rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
+ }
+ }
+ }
+ }
+ }
+}
+
+// Multiple spirals arranged radially around the axis tapering in towards the axis
+module spiralMultiCone(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
+ shiftAngle=360/numSpirals;
+ for(total=[0:numSpirals-1]) {
+ union(){
+ translate ([0,0,-(height/2)]) {
+ for(i=[0:resolution-2]){
+ hull(){
+ rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius-(i-1)*Radius/resolution,0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
+ rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius-i*Radius/resolution,0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
+ }
+ }
+ }
+ }
+ }
+}
+
+//multiple ellipse spiral
+module spiralMultiEllipse(height=20,Radius=20,baseRadius=3,frequency=1,resolution=25,numSpirals=3,$fn=50) {
+ shiftAngle=360/numSpirals;
+ for(total=[0:numSpirals-1]) {
+ union(){
+ translate ([0,0,-(height/2)]) {
+ for(i=[0:resolution-2]){
+ hull(){
+ rotate ([0,0,frequency*360/(resolution-1)*i+shiftAngle*total]) translate ([Radius*sqrt(1-(i/(resolution-1)*(i/(resolution-1)))),0,i*height/(resolution-1)]) sphere(r=baseRadius, center=true);
+ rotate ([0,0,frequency*360/(resolution-1)*(i+1)+shiftAngle*total]) translate ([Radius*sqrt(1-((i+1)/(resolution-1)*((i+1)/(resolution-1)))),0,(i+1)*height/(resolution-1)]) sphere(r=baseRadius,center=true);
+ }
+ }
+ }
+ }
+ }
+}
\ No newline at end of file
diff --git a/hardware/mount.scad b/hardware/mount.scad
new file mode 100644
index 0000000..d9b4283
--- /dev/null
+++ b/hardware/mount.scad
@@ -0,0 +1,293 @@
+include <./modules.scad>
+include <./variables.scad>
+
+module motor_key_120 (half = false, DECOYS = false, sides = 1, ALT = false) {
+ innerD = 7.85;
+ outer_d = 27.5 + 2;
+ notch_d = 10;
+ height = 7 + 5 + 4;
+ diff = 14 + 2.5 + 2;
+ $fn = 60;
+ difference () {
+ union () {
+ translate([one_to_one_x, one_to_one_y, 12.1]) cylinder(r1 = 12 / 2, r2 = 12/2 + 4, h = 5, center = true);// padding against bearing
+ translate([one_to_one_x, one_to_one_y, diff + 1]) cylinder(r=outer_d/2, h= height -2, center= true, $fn=200); //large cylinder
+ translate([one_to_one_x, one_to_one_y, 6]) cylinder(r=innerD/2, h= 10, center= true);
+ //key_end([0, 180, 0], [one_to_one_x, one_to_one_y, -2.5]); //thicker-than-key_end cylinder for inner bearing
+ key_end([0, 180, -20], [one_to_one_x, one_to_one_y, -3.5], ALT = ALT); // longer for laser cut board
+ //key_end([0, 180, 0], [one_to_one_x, one_to_one_y, -4.5]); //experimental length
+ }
+ //1 notch
+ translate([one_to_one_x, one_to_one_y, diff]) {
+ translate ([-outer_d/2 - 2.5, 0, 0]) cylinder(r=notch_d/2, h= height, center= true); //notch
+ }
+ translate([one_to_one_x, one_to_one_y, diff]) {
+ translate ([-outer_d/2 -.5, -3.5 , 0]) rotate([0, 0, 100]) cube([15, 5, height], center = true); // smooth notch
+ translate ([-outer_d/2 -.5, 3.5, 0]) rotate([0, 0, -100]) cube([15, 5, height], center = true); // smooth notch
+ }
+
+ if (sides == 2) {
+ //2 notch
+ translate([one_to_one_x, one_to_one_y, diff]) {
+ translate ([outer_d/2 + 2.5, 0, 0]) cylinder(r=notch_d/2, h= height, center= true); //notch
+ }
+ translate([one_to_one_x, one_to_one_y, diff]) {
+ translate ([outer_d/2 +.5, -3.5, 0]) rotate([0, 0, -100]) cube([15, 5, height], center = true); // smooth notch
+ translate ([outer_d/2 +.5, 3.5, 0]) rotate([0, 0, 100]) cube([15, 5, height], center = true); // smooth notch
+ }
+ }
+
+ //slot for hobbled(?) end
+ translate([one_to_one_x, one_to_one_y, 17 + 2]) {
+ translate([0, 0, 6.5]) hobbled_rod_120(12);
+ //translate([6.42, 0, 6 - 1.7]) motor_set_screw_120();
+ translate([6.42 - .2, 0, 4.3 - 1]) rotate([0, 90, 0]) motor_set_screw_120_alt();
+ translate([14, 0, 4.3 - 1]) rotate([0, 90, 0]) cylinder(r2 = 6 / 2, r1 = 5.8 / 2, h = 6, center = true); //extension
+
+ }
+ //translate([one_to_one_x, one_to_one_y, 20.5]) cylinder(r = 11.5/2, h = 10, center = true);
+
+ translate([one_to_one_x, one_to_one_y, 17.5]) {
+ difference() {
+ //cylinder(r = 7.5/2, h = 2, center = true);
+ //translate([5, 0, 0]) cube([10, 10, 10], center = true);
+ }
+ }
+ if (half) {
+ translate([one_to_one_x - 50 , one_to_one_y, -50]) cube([100, 100, 200]);
+ }
+ }
+ // translate([one_to_one_x, one_to_one_y, 17]) translate([6.42 - .2, 0, 6 - 1.7]) rotate([0, 90, 0]) motor_set_screw_120_alt();
+ if (DECOYS) {
+ translate([one_to_one_x, one_to_one_y, 20.5]) decoys(24);
+ }
+}
+
+module motor_set_screw_120 () {
+ cube([10.19, 2.95, 2.95], center = true);
+ translate([(10.19 / 2) - (2.56 / 2), 0, 0]) cube([2.56, 5.8, 5.8], center = true);
+}
+
+module motor_set_screw_120_alt () {
+ $fn = 60;
+ cylinder(r = 2.95 / 2, h = 10.19, center= true);
+ translate([0, 0, (10.19 / 2) - (2.56 / 2)]) cylinder(r = 5.8 / 2, h = 2.56, center = true);
+}
+
+module hobbled_rod_120 (h = 10) {
+ d = 4.00;
+ diff = 3.33;
+ difference () {
+
+ cylinder(r = d/2, h = h, center = true, $fn = 60);
+ translate([d/2 + ((d/2) - (d - diff)), 0, 0]) cube([d, d, h + 1], center = true);
+ }
+}
+
+module motor_12v () {
+ motor_d = 37;
+ motor_h = 63;
+ end = 11.5;
+ len = 17;
+ cylinder(r = motor_d/2, h = motor_h, center=true);
+ translate([0, 0, (motor_h / 2) + (len / 2)]) cylinder(r = end/2, h = len, center=true);
+}
+
+module geared_motor_mount_120 (DECOYS = false) {
+ $fn = 160;
+ base_d = 45;
+ base_inner = 25.2;
+ base_thickness = 3;
+ hole_d = 7;
+ screw_d = 3.2;
+ bolt_end = 5.4;
+ height = 6;
+ screw_distance = 17;
+ difference () {
+ difference () {
+ translate([-6, 0, 2.5]) cylinder(r=base_d/2, h=height + 5, center = true); //outer cylinder
+ //translate([-6, 0, base_thickness + 2.5]) cylinder(r=base_inner/2, h=height + 5, center = true); //inner cylinder
+ translate([0, 0, base_thickness + 1.5]) cylinder(r=base_inner/2, h=height + 5, center = true); //inner cylinder
+ }
+ cylinder(r=hole_d/2, h=29, center = true); //center hole
+ //screw holes
+ translate([0, 0, 0]) {
+ translate([0, screw_distance/2, 0]) cylinder(r=screw_d/2, h=29, center = true);
+ translate([0, -screw_distance/2, 0]) cylinder(r=screw_d/2, h=29, center = true);
+
+ //bolt ends
+ translate([0, screw_distance/2, -3]) cylinder(r=bolt_end/2, h=2, center = true);
+ translate([0, -screw_distance/2, -3]) cylinder(r=bolt_end/2, h=2, center = true);
+ }
+ translate([2, 19, 0]) cylinder(r=5, h = 100, center = true); //hole for panel bolt access
+ }
+ //wings
+ translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[0], mm_y[0], 0], mm_r[0], height, mm_l[0]);
+ translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[1], mm_y[1], 0], mm_r[1], height, mm_l[1]);
+ //translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[5] , mm_y[5], 0], mm_r[5], height, mm_l[5] - 1);
+ if (DECOYS) {
+ translate([-7, -6, 0]) decoys(40, -1, 4);
+ translate([-9, -2, 0]) rotate([0, 0, 49]) decoys(37, -1, 4);
+ }
+}
+
+
+module motor_mount_bottom () {
+ $fn = 60;
+ mount_d = 45;
+ base_d = 45;
+ outer_d = 28 + 2.3 + 4;
+ height = 19 + 3.5 + 4;
+ bolt_h = 22.3;
+ shelf_h = 6; //match to motor_mount
+ screw_d = 4;
+ module motor_mount_core () {
+ translate ([one_to_one_x, one_to_one_y, (height / 2 ) + 5.75]) {
+ difference() {
+ translate([-6, 0, 0]) cylinder(r = mount_d / 2, h = height, center = true); //main block
+ translate([0, 0, (height / 2) - (shelf_h / 2)]) cylinder(r = base_d / 2 + 7, h = shelf_h, center = true); //shelf for motor_mount
+ cylinder(r = outer_d / 2, h = 50, center = true); //space for spinning
+ translate ([-one_to_one_x, -one_to_one_y, 0]) remove_front(); //flatten side
+ translate([-32, -17, -19]) cube([40, 40, 40], center= true); //hole for notch
+ translate([-42, 0, -19]) rotate([0, 0, -39]) cube([40, 40, 40], center= true); //hole for notch
+ translate([2.5, 19.5, 0]) cylinder(r=10/2, h = 60, center=true); // hole for panel bolt
+ translate([22.5, 19.5, 0]) cube([40, 40, 60], center = true); //remove front entirely
+ translate([-6.5, 0, 7.5]) {
+ translate([0, screw_distance/2, 0]) sphere(r=screw_d, center = true);
+ translate([0, -screw_distance/2, 0]) sphere(r=screw_d, center = true);
+ }
+ }
+ translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[0], mm_y[0], -shelf_h / 2], mm_r[0], height - shelf_h, mm_l[0], tight = 0.2); //Bottom bolt holder
+ translate ([-one_to_one_x, -one_to_one_y, 0]) bolt_holder([mm_x[1] , mm_y[1], -shelf_h / 2], mm_r[1], height - shelf_h, mm_l[1], tight = 0.2); //Left bolt holder
+
+ translate ([-one_to_one_x, -one_to_one_y, -2]) bolt_holder([mm_x[5] , mm_y[5], -shelf_h / 2], mm_r[5], height - shelf_h - 4, mm_l[5]); //Top bolt holder
+ }
+ }
+ module microswitch_holder () {
+ difference () {
+ translate([29, -1, 14]) cube([36, 65, height - shelf_h - 4], center = true);//Base shape
+ translate ([25.5, -14, 15]) {
+ cube([17, 28, 39.5], center = true); //rectangle hole for center
+ translate([4.5, 5.6, 0]) rotate([0, 0, -23]) cube([17, 25, 39.5], center = true); //bottom right inner
+ translate([-2, -18, -3.5]) cube([7, 11, 12], center = true); // hole for bottom pins
+ translate([-9.5, -1, -3.5]) cube([30, 4, 12], center = true); //hole for side pin
+ }
+ translate ([14, 37.5, 15]) rotate([0, 0, 44]) cube([55, 30, 30], center= true); //top left outer
+ translate ([one_to_one_x, one_to_one_y, 18]) {
+ cylinder(r = outer_d / 2, h = 50, center = true); //space for spinning
+ }
+ translate ([32, 6, 15]) {
+ difference () {
+ translate([3, 0, 0]) rotate([0, 0, 0]) cube([20, 25, 39.5], center = true); //removes area for microswitch arm
+ translate([-2, 16, 0]) rotate([0, 0, -55]) cube([20, 50, 39.5], center = true);
+ }
+ }
+ translate ([58, -25, 15]) {
+ rotate([0, 0, 75]) cube([45, 30, 30], center= true); //bottom right outer
+ }
+ translate([mm_x[4], mm_y[4], 0]) cylinder(r = bolt_inner, h = 100, center = true); // extra bolt hole
+ translate([mm_x[1], mm_y[1], 0]) cylinder(r = 4, h = 100, center = true); //clear out top left bolt hole
+ }
+ }
+ module panel_attachment () {
+ difference () {
+ union() {
+ translate([0, 0, 7.75 + 3]) cylinder(r = 10/2, h = 44 - shelf_h, center = true);
+ translate([3.5, 0, 0]) cube([7, 7, height - shelf_h - 4], center = true);
+ }
+ translate([0, 0, 25]) cylinder(r = 3.2/2, h = 50, center = true);
+ }
+ }
+ translate([8, -9, (height - shelf_h) / 2 + 3.75]) panel_attachment();
+ motor_mount_core();
+ microswitch_holder();
+ bolt_holder([mm_x[2], mm_y[2], ((height - shelf_h)/ 2) + 3.75], 0, height - shelf_h - 4, 6); //bottom left mount
+ bolt_holder([mm_x[3], mm_y[3], ((height - shelf_h)/ 2) + 3.75], 180, height - shelf_h - 4, 6); //bottom right mount
+ if (DECOYS) {
+ difference () {
+ translate([35, 0 , 0]) decoys(44, 8, 6);
+ }
+ translate([0, 0, 8]) cube([4, 4, 4], center = true);
+ translate([40, 55, 8]) cube([4, 4, 4], center = true);
+ }
+}
+module bolt_holder (position = [0, 0, 0], rotate_z = 0, h = 17, length = 4.5, hole = true, tight = 0) {
+ bolt_r = 6;
+
+ translate (position) {
+ difference () {
+ union() {
+ cylinder(r = bolt_r + 0, h = h, center = true);
+ rotate([0, 0, rotate_z]) translate([length/2, 0, 0]) cube([length, bolt_r * 2, h], center=true);
+ }
+ if (hole) {
+ cylinder(r = bolt_inner - tight, h = h + 2, center = true);
+ }
+ }
+ }
+}
+module microswitch (position = [0, 0, 0], rotation = [0, 0, 0]) {
+ translate(position) {
+ rotate(rotation) {
+ cube([16, 28, 9.5], center = true);
+ translate([10, 8, 0]) rotate([0, 0, -7]) cube([1, 28, 4], center = true);
+ translate([8 + 7, 14 + 8, 0]) cylinder(r = 2.5, h = 4, center = true);
+ translate([0, -19, 0]) cube([6, 11, 9.5], center = true);
+ }
+ }
+}
+module l289N_mount () {
+ $fn = 60;
+ DISTANCE = 36.5;
+ H = 4;
+ THICKNESS = 3;
+ module stand () {
+ difference () {
+ cylinder(r1 = 4, r2 = 3, h = H, center = true);
+ cylinder(r = 1.5, h = H, center = true);
+ }
+ }
+ translate([0, 0, 0]) stand();
+ translate([DISTANCE, 0, 0]) stand();
+ translate([DISTANCE, DISTANCE, 0]) stand();
+ translate([0, DISTANCE, 0]) stand();
+ difference () {
+ translate([DISTANCE/2, DISTANCE/2, -3]) rounded_cube([DISTANCE + 8, DISTANCE + 8, THICKNESS], 8, center = true); //base
+ translate([DISTANCE/2, DISTANCE/2, -3]) rounded_cube([DISTANCE - 5, DISTANCE - 5, THICKNESS], 10, center = true); //base
+ translate([0, 0, 0]) cylinder(r = 1.5, h = H * 5, center = true);
+ translate([DISTANCE, 0, 0]) cylinder(r = 1.5, h = H * 5, center = true);
+ translate([DISTANCE, DISTANCE, 0]) cylinder(r = 1.5, h = H * 5, center = true);
+ translate([0, DISTANCE, 0]) cylinder(r = 1.5, h = H * 5, center = true);
+ }
+}
+module pcb_mount () {
+ DISTANCE_X = 41;
+ DISTANCE_Y = 66;
+ OUTER = 10;
+ H = 8;
+
+ module stand () {
+ difference () {
+ cylinder(r1 = 5, r2 = 4, h = H, center = true);
+ cylinder(r = 1.75, h = H, center = true);
+ }
+ }
+ translate([0, 0, 0]) stand();
+ translate([DISTANCE_X, 0, 0]) stand();
+ translate([DISTANCE_X, DISTANCE_Y, 0]) stand();
+ translate([0, DISTANCE_Y, 0]) stand();
+ translate([DISTANCE_X/2, DISTANCE_Y/2, -4]) rounded_cube([DISTANCE_X + OUTER, DISTANCE_Y + OUTER, 4], OUTER, center = true);
+}
+
+module bolt_guide () {
+ $fn = 60;
+ H = 39;
+ difference () {
+ union() {
+ cylinder(r = 10 / 2, h = H, center = true);
+ translate([0, 0, -(H / 2) + 1]) cylinder(r = 14 / 2, h = 2, center = true);
+ }
+ cylinder(r = 7 / 2, h = H + 1, center = true);
+ translate([12, 0, -(H / 2) + 1]) cube([14, 14, 3], center = true);
+ }
+}
\ No newline at end of file
diff --git a/hardware/plunger.scad b/hardware/plunger.scad
new file mode 100644
index 0000000..ca14f80
--- /dev/null
+++ b/hardware/plunger.scad
@@ -0,0 +1,51 @@
+include <./modules.scad>
+include <./variables.scad>
+
+module plunger () {
+ $fn = 60;
+ FINGER = 39;
+ CYL_D = 9;
+ WALL = 3;
+ difference () {
+ union () {
+ cylinder(r1 = CYL_D, r2 = CYL_D - 1, h = 30, center = true); //outer cylinder
+ difference () {
+ translate([0, 0, -9]) rotate([90, 0, 0]) rounded_cube([50, 12, 10], d = 5, center = true);
+ translate([23, 0, 9]) rotate([90, 0, 0]) cylinder(r = FINGER/2, h = 20, center = true);
+ translate([-23, 0, 9]) rotate([90, 0, 0]) cylinder(r = FINGER/2, h = 20, center = true);
+ }
+ }
+ translate([0, 0, 2]) cylinder( r = CYL_D - WALL, h = 30, center = true); //inner cylinder
+ cylinder(r = 7/2, h = 50, center = true); // button hole
+
+ }
+
+ //cylinder(r= 5, h = 50, center = true); button
+}
+
+module plunger_top () {
+ $fn = 60;
+ CYL_D = 9;
+ WALL = 3;
+
+ difference () {
+ union () {
+ cylinder(r = CYL_D - WALL - 0.015, h =6, center = true);
+ translate([0, 0, 2]) cylinder (r = CYL_D - 1, h = 2, center = true);
+ }
+ translate([0, 0, -2]) cylinder(r = CYL_D - WALL - 0.015 - 1, h =6, center = true);
+ //cylinder(r = 3/2, h = 50, center = true); // wire
+ cylinder(r = 3.9/2, h = 50, center = true); //3.5mm wire
+ }
+}
+
+module plunger_plate () {
+ translate([40, 0, -12]) rotate([180, 0, 0]) plunger_top();
+ plunger();
+
+ //decoys
+ /*translate([44,20,-13]) cube([4, 4, 4], center = true);
+ translate([44,-20,-13]) cube([4, 4, 4], center = true);
+ translate([-23,20,-13]) cube([4, 4, 4], center = true);
+ translate([-23,-20,-13]) cube([4, 4, 4], center = true);*/
+}
\ No newline at end of file
diff --git a/hardware/variables.scad b/hardware/variables.scad
new file mode 100644
index 0000000..a8aa24c
--- /dev/null
+++ b/hardware/variables.scad
@@ -0,0 +1,21 @@
+mm_x = [61.5, 21.5, 6, 45.5, 18, 39];
+mm_y = [-18, 21, -27.5, -27.5, 7, 39];
+mm_r = [110, -15, 0, 0, 0, -70];
+mm_l = [13, 9, 0, 0, 0, 8];
+
+xArray = [-3, 57, 55, -26]; //NO MIDDLE PIN
+yArray = [38, 31, -56, -33]; //NO MIDDLE PIN
+
+outerD = 9;
+innerD = 4.5;
+height = 17;
+
+panel_2_x = 110;
+panel_2_y = 110;
+
+one_to_one_x = 54.5;
+one_to_one_y = 12;
+
+bolt_inner = 2.55;
+
+screw_distance = 31;
\ No newline at end of file
diff --git a/index.js b/index.js
index f1c5f69..6d5b810 100644
--- a/index.js
+++ b/index.js
@@ -1,57 +1,616 @@
'use strict'
-const ble = require('./lib/blootstrap')
-const intval = require('./lib/intval')
const restify = require('restify')
-const logger = require('winston')
+const log = require('./lib/log')('main')
const fs = require('fs')
-const pin = {}
+const { exec } = require('child_process')
+
+const BLE = require('./lib/ble')
+const intval = require('./lib/intval')
+const sequence = require('./lib/sequence')
const PACKAGE = require('./package.json')
const PORT = process.env.PORT || 6699
const APPNAME = PACKAGE.name
-const INDEX = fs.readFileSync('./app/www/index.html', 'utf8')
+const INDEXPATH = './app/www/index.html'
let app = restify.createServer({
name: APPNAME,
- version: '0.0.1'
+ version: PACKAGE.version
})
+let ble
+
function createServer () {
- app.get('/', index)
- app.get('/frame', rFrame)
+ app.use(restify.plugins.queryParser())
+ app.use(restify.plugins.bodyParser({ mapParams: false }))
+ app.get( '/', index)
+ app.get( '/dir', rDir)
+ app.post('/dir', rDir)
+ app.get( '/exposure', rExposure)
+ app.post('/exposure', rExposure)
+ app.get( '/delay', rDelay)
+ app.post('/delay', rDelay)
+ app.get( '/counter', rCounter)
+ app.post('/counter', rCounter)
+ app.get( '/frame', rFrame)
app.post('/frame', rFrame)
- app.get('/sequence', () => {})
- app.post('/sequence', () => {})
- app.get('/status', rStatus)
+ app.get( '/sequence', rSequence)
+ app.post('/sequence', rSequence)
+
+ app.get( '/status', rStatus)
+ app.post('/reset', rReset)
+ app.post('/update', rUpdate)
+ app.post('/restart', rRestart)
+
+
app.listen(PORT, () => {
- console.log(`${APPNAME} listening on port ${PORT}!`)
+ log.info('server', { name : APPNAME, port : PORT })
})
}
-function rFrame (req, res, next) {
- res.send({})
+function createBLE () {
+ ble = new BLE(() => {
+ return intval.status()
+ })
+ ble.on('frame', bFrame)
+ ble.on('dir', bDir)
+ ble.on('exposure', bExposure)
+ ble.on('delay', bDelay)
+ ble.on('counter', bCounter)
+ ble.on('sequence', bSequence)
+
+ ble.on('reset', bReset)
+ ble.on('update', bUpdate)
+ ble.on('restart', bRestart)
+}
+
+//Restify functions
+function rDir (req, res, next) {
+ let dir = true
+ let set = false
+ if (req.query && typeof req.query.dir !== 'undefined') {
+ if (typeof req.query.dir === 'string') {
+ dir = (req.query.dir === 'true')
+ } else {
+ dir = req.query.dir
+ }
+ set = true
+ } else if (req.body && typeof req.body.dir !== 'undefined') {
+ if (typeof req.body.dir === 'string') {
+ dir = (req.body.dir === 'true')
+ } else {
+ dir = req.body.dir
+ }
+ set = true
+ }
+ if (set) {
+ intval.setDir(dir)
+ } else {
+ dir = intval._state.frame.dir
+ }
+ log.info('/dir', { method: req.method, set : set, dir : dir})
+ res.send({ dir : dir })
return next()
}
+function rExposure (req, res, next) {
+ let exposure = 0
+ let set = false
+ if (req.query && typeof req.query.exposure !== 'undefined') {
+ if (typeof req.query.exposure === 'string') {
+ exposure = parseInt(req.query.exposure)
+ } else {
+ exposure = req.query.exposure
+ }
+ set = true
+ } else if (req.body && typeof req.body.exposure !== 'undefined') {
+ if (typeof req.body.exposure === 'string') {
+ exposure = parseInt(req.body.exposure)
+ } else {
+ exposure = req.body.exposure
+ }
+ set = true
+ }
+ if (set) {
+ if (exposure <= intval._frame.expected) {
+ exposure = 0;
+ }
+ intval.setExposure(exposure)
+ } else {
+ exposure = intval._state.frame.exposure
+ }
+ log.info('/exposure', { method: req.method, set : set, exposure : exposure })
+ res.send({ exposure : exposure })
+ return next()
+}
+
+function rDelay (req, res, next) {
+ let delay = 0
+ let set = false
+ if (req.query && typeof req.query.delay !== 'undefined') {
+ if (typeof req.query.delay === 'string') {
+ delay = parseInt(req.query.delay)
+ } else {
+ delay = req.query.delay
+ }
+ set = true
+ }
+ if (req.body && typeof req.body.delay !== 'undefined') {
+ if (typeof req.body.delay === 'string') {
+ delay = parseInt(req.body.delay)
+ } else {
+ delay = req.body.delay
+ }
+ set = true
+ }
+ if (set) {
+ intval.setDelay(delay)
+ } else {
+ delay = intval._state.frame.delay
+ }
+ log.info('/delay', { method: req.method, set : set, delay : delay })
+ res.send({ delay : delay })
+ return next()
+}
+
+function rCounter (req, res, next) {
+ let counter = 0
+ let set = false
+ if (req.query && typeof req.query.counter !== 'undefined') {
+ if (typeof req.query.counter === 'string') {
+ counter = parseInt(req.query.counter)
+ } else {
+ counter = req.query.counter
+ }
+ set = true
+ }
+ if (req.body && typeof req.body.counter !== 'undefined') {
+ if (typeof req.body.counter !== 'string') {
+ counter = parseInt(req.body.counter)
+ } else {
+ counter = req.body.counter
+ }
+ set = true
+ }
+ if (set) {
+ intval.setCounter(counter)
+ } else {
+ counter = intval._state.counter
+ }
+ log.info('/counter', { method : req.method, set : set, counter : counter })
+ res.send({ counter : counter })
+ return next()
+}
+
+function rFrame (req, res, next) {
+ let dir = true
+ let exposure = 0
+ if (intval._state.frame.dir !== true) {
+ dir = false
+ }
+ if (intval._state.frame.exposure !== 0) {
+ exposure = intval._state.frame.exposure
+ }
+ if (req.query && typeof req.query.dir !== 'undefined') {
+ if (typeof req.query.dir === 'string') {
+ dir = (req.query.dir === 'true')
+ } else {
+ dir = req.query.dir
+ }
+ }
+ if (req.body && typeof req.body.dir !== 'undefined') {
+ if (typeof req.body.dir === 'string') {
+ dir = (req.body.dir === 'true')
+ } else {
+ dir = req.body.dir
+ }
+ }
+ if (req.query && typeof req.query.exposure !== 'undefined') {
+ if (typeof req.query.exposure === 'string') {
+ exposure = parseInt(req.query.exposure)
+ } else {
+ exposure = req.query.exposure
+ }
+ }
+ if (req.body && typeof req.body.exposure !== 'undefined') {
+ if (typeof req.body.exposure === 'string') {
+ exposure = parseInt(req.body.exposure)
+ } else {
+ exposure = req.body.exposure
+ }
+ }
+ if (req.query && typeof req.query.delay !== 'undefined') {
+ if (typeof req.query.delay === 'string') {
+ delay = parseInt(req.query.delay)
+ } else {
+ delay = req.query.delay
+ }
+ }
+ if (req.body && typeof req.body.delay !== 'undefined') {
+ if (typeof req.body.delay === 'string') {
+ delay = parseInt(req.body.delay)
+ } else {
+ delay = req.body.delay
+ }
+ }
+ log.info('/frame', { method : req.method, dir : dir, exposure : exposure })
+ intval.frame(dir, exposure, (len) => {
+ res.send({ dir : dir, len : len})
+ return next()
+ })
+}
+
function rStatus (req, res, next) {
const obj = intval.status()
- res.send({})
+ res.send(obj)
return next()
}
-function index (req, res, next) {
- res.end(INDEX)
- return next()
+function rSequence (req, res, next) {
+ let dir = true
+ let exposure = 0
+ let delay = 0
+
+ if (intval._state.frame.dir !== true) {
+ dir = false
+ }
+ if (intval._state.frame.exposure !== 0) {
+ exposure = intval._state.frame.exposure
+ }
+ if (intval._state.frame.delay !== 0) {
+ delay = intval._state.frame.delay
+ }
+
+ if (req.query && typeof req.query.dir !== 'undefined') {
+ if (typeof req.query.dir === 'string') {
+ dir = (req.query.dir === 'true')
+ } else {
+ dir = req.query.dir
+ }
+ }
+ if (req.body && typeof req.body.dir !== 'undefined') {
+ if (typeof req.body.dir === 'string') {
+ dir = (req.body.dir === 'true')
+ } else {
+ dir = req.body.dir
+ }
+ }
+ if (req.query && typeof req.query.exposure !== 'undefined') {
+ if (typeof req.query.exposure === 'string') {
+ exposure = parseInt(req.query.exposure)
+ } else {
+ exposure = req.query.exposure
+ }
+ }
+ if (req.body && typeof req.body.exposure !== 'undefined') {
+ if (typeof req.body.exposure === 'string') {
+ exposure = parseInt(req.body.exposure)
+ } else {
+ exposure = req.body.exposure
+ }
+ }
+ if (req.query && typeof req.query.delay !== 'undefined') {
+ if (typeof req.query.delay === 'string') {
+ delay = parseInt(req.query.delay)
+ } else {
+ delay = req.query.delay
+ }
+ }
+ if (req.body && typeof req.body.delay!== 'undefined') {
+ if (typeof req.body.delay === 'string') {
+ delay = parseInt(req.body.delay)
+ } else {
+ delay = req.body.delay
+ }
+ }
+ if (intval._state.sequence && sequence._state.active) {
+ sequence.setStop()
+ intval._state.sequence = false
+ res.send({ stopped : true })
+ return next()
+ } else {
+ console.time('sequence time')
+ intval._state.sequence = true
+ let seq_id = sequence.start({
+ loop : [ (next) => {
+ intval.frame(dir, exposure, (len) => {
+ next()
+ })
+ }, (next) => {
+ setTimeout(() => {
+ next()
+ }, delay)
+ }]
+ }, (seq) => {
+ console.timeEnd('sequence time')
+ })
+
+ if (seq_id === false) {
+ res.send({ started : false })
+ } else {
+ res.send({ started : true , id : seq_id })
+ }
+
+ return next()
+ }
}
+function rReset (req, res, next) {
+ log.info(`/reset`, {time : +new Date()})
+ intval.reset()
+ setTimeout(() => {
+ const obj = intval.status()
+ res.send(obj)
+ return next()
+ }, 10)
+}
-function init () {
- createServer()
-
- ble.on('data', (str) => {
- console.log(str)
+function rUpdate (req, res, next) {
+ log.info(`/update`, { time : +new Date() })
+ exec('sh ./scripts/update.sh', (err, stdio, stderr) => {
+ if (err) {
+ log.error(err)
+ }
+ log.info(`/update`, { git : stdio })
+ res.send({ success : true, action : 'update', output : stdio })
+ res.end()
+ next()
+ setTimeout(() => {
+ process.exit(0)
+ }, 100)
})
}
+function rRestart (req, res, next) {
+ log.info(`/restart`, { time : +new Date() })
+ res.send({ success : true, action : 'restart' })
+ res.end()
+ next()
+ setTimeout(() => {
+ process.exit(0)
+ }, 100)
+}
+
+//Ble functions
+
+function bFrame (obj, cb) {
+ let dir = true
+ let exposure = 0
+
+ if (intval._state.frame.dir !== true) {
+ dir = false
+ }
+ if (intval._state.frame.exposure !== 0) {
+ exposure = intval._state.frame.exposure
+ }
+ if (typeof obj.dir !== 'undefined') {
+ if (typeof obj.dir === 'string') {
+ dir = (obj.dir === 'true')
+ } else {
+ dir = obj.dir
+ }
+ }
+ if (typeof obj.exposure !== 'undefined') {
+ if (typeof obj.exposure === 'string') {
+ exposure = parseInt(obj.exposure)
+ } else {
+ exposure = obj.exposure
+ }
+ }
+ log.info('frame', { method : 'ble', dir : dir, exposure : exposure })
+
+ if (exposure < 5000) {
+ intval.frame(dir, exposure, (len) => {
+ return cb()
+ })
+ } else {
+ intval.frame(dir, exposure, (len) => {})
+ return cb()
+ }
+
+ //setTimeout(cb, exposure === 0 ? 630 : exposure)
+}
+
+function bDir (obj, cb) {
+ let dir = true
+ let set = false
+ if (obj.dir !== 'undefined') {
+ if (typeof obj.dir === 'string') {
+ dir = (obj.dir === 'true')
+ } else {
+ dir = obj.dir
+ }
+ }
+ intval.setDir(dir)
+ log.info('dir', { method: 'ble', dir : dir })
+ cb()
+}
+
+function bExposure (obj, cb) {
+ let exposure = 0
+ if (typeof obj.exposure !== 'undefined') {
+ if (typeof obj.exposure === 'string') {
+ exposure = parseInt(obj.exposure)
+ } else {
+ exposure = obj.exposure
+ }
+ }
+ intval.setExposure(exposure)
+ log.info('exposure', { method: 'ble', exposure : exposure })
+ return cb()
+}
+
+function bDelay (obj, cb) {
+ let delay = 0
+ let set = false
+ if (typeof obj.delay !== 'undefined') {
+ if (typeof obj.delay === 'string') {
+ delay = parseInt(obj.delay)
+ } else {
+ delay = obj.delay
+ }
+ set = true
+ }
+ intval.setDelay(delay)
+ log.info('delay', { method: 'ble', delay : delay })
+ return cb()
+}
+
+function bCounter (obj, cb) {
+ let counter = 0
+ if (typeof obj.counter !== 'undefined') {
+ if (typeof obj.counter !== 'string') {
+ counter = parseInt(obj.counter)
+ } else {
+ counter = obj.counter
+ }
+ }
+ intval.setCounter(counter)
+ log.info('counter', { method : 'ble', counter : counter })
+ return cb()
+}
+
+function bSequence (obj, cb) {
+ let dir = true
+ let exposure = 0
+ let delay = 0
+
+ if (intval._state.frame.dir !== true) {
+ dir = false
+ }
+ if (intval._state.frame.exposure !== 0) {
+ exposure = intval._state.frame.exposure
+ }
+ if (intval._state.frame.delay !== 0) {
+ delay = intval._state.frame.delay
+ }
+
+ if (typeof obj.dir !== 'undefined') {
+ if (typeof obj.dir === 'string') {
+ dir = (obj.dir === 'true')
+ } else {
+ dir = obj.dir
+ }
+ }
+ if (typeof obj.exposure !== 'undefined') {
+ if (typeof obj.exposure === 'string') {
+ exposure = parseInt(obj.exposure)
+ } else {
+ exposure = obj.exposure
+ }
+ }
+ if (intval._state.sequence && sequence._state.active) {
+ //should not occur with single client
+ sequence.setStop()
+ intval._state.sequence = false
+ log.info('sequence stop', { method : 'ble' })
+ return cb()
+ } else {
+ console.time('sequence time')
+ intval._state.sequence = true
+ let seq_id = sequence.start({
+ loop : [ (next) => {
+ intval.frame(dir, exposure, (len) => {
+ next()
+ })
+ }, (next) => {
+ setTimeout(() => {
+ next()
+ }, delay)
+ }]
+ }, (seq) => {
+ console.timeEnd('sequence time')
+ })
+ if (seq_id !== false) {
+ log.info('sequence start', { method : 'ble', id : seq_id })
+ }
+ return cb()
+ }
+}
+
+function bSequenceStop (obj, cb) {
+ //
+ if (intval._state.sequence && sequence._state.active) {
+ sequence.setStop()
+ intval._state.sequence = false
+ log.info('sequence stop', { method : 'ble' })
+ return cb()
+ }
+}
+
+function bReset (obj, cb) {
+ log.info(`reset`, { method: 'ble' })
+ intval.reset()
+ setTimeout(cb, 10)
+}
+
+function bUpdate (obj, cb) {
+ log.info('update', { method : 'ble' })
+ exec('sh ./scripts/update.sh', (err, stdio, stderr) => {
+ if (err) {
+ log.error('update', err)
+ }
+ log.info('update', { stdio : stdio })
+ cb()
+ setTimeout(() => {
+ process.exit(0)
+ }, 20)
+ })
+}
+function bRestart (obj, cb) {
+ log.info('restart', { method : 'ble' })
+ cb()
+ setTimeout(() => {
+ process.exit(0)
+ }, 20)
+}
+
+function seq () {
+ let dir = intval._state.frame.dir
+ let exposure = intval._state.frame.exposure
+ let delay = intval._state.frame.delay
+
+ if (intval._state.sequence && sequence._state.active) {
+ log.info('sequence', { method : 'release' , stop: true })
+ sequence.setStop()
+ intval._state.sequence = false
+ return cb()
+ } else {
+ console.time('sequence time')
+ log.info('sequence', { method : 'release', start : true })
+ intval._state.sequence = true
+ sequence.start({
+ loop : [ (next) => {
+ intval.frame(dir, exposure, (len) => {
+ next()
+ })
+ }, (next) => {
+ setTimeout(() => {
+ next()
+ }, delay)
+ }]
+ }, (seq) => {
+ console.timeEnd('sequence time')
+ })
+ }
+}
+
+function index (req, res, next) {
+ fs.readFile(INDEXPATH, 'utf8', (err, data) => {
+ if (err) {
+ return next(err)
+ }
+ res.end(data)
+ next()
+ })
+}
+
+function init () {
+ intval.init()
+ intval.sequence = seq
+ createServer()
+ createBLE()
+}
+
init()
diff --git a/lib/ble/Readme.md b/lib/ble/Readme.md
new file mode 100644
index 0000000..711a7c2
--- /dev/null
+++ b/lib/ble/Readme.md
@@ -0,0 +1,44 @@
+
+
+## ble
+
+* [ble](#module_ble)
+ * [~BLE](#module_ble..BLE)
+ * [new BLE()](#new_module_ble..BLE_new)
+ * [.on(eventName, callback)](#module_ble..BLE+on)
+ * [~os](#module_ble..os)
+
+
+
+### ble~BLE
+Class representing the bluetooth interface
+
+**Kind**: inner class of [ble
](#module_ble)
+
+* [~BLE](#module_ble..BLE)
+ * [new BLE()](#new_module_ble..BLE_new)
+ * [.on(eventName, callback)](#module_ble..BLE+on)
+
+
+
+#### new BLE()
+Establishes Bluetooth Low Energy services, accessible to process through this class
+
+
+
+#### blE.on(eventName, callback)
+Binds functions to events that are triggered by BLE messages
+
+**Kind**: instance method of [BLE
](#module_ble..BLE)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| eventName | string
| Name of the event to to bind |
+| callback | function
| Invoked when the event is triggered |
+
+
+
+### ble~os
+Bluetooth Low Energy module
+
+**Kind**: inner constant of [ble
](#module_ble)
diff --git a/lib/ble/index.js b/lib/ble/index.js
new file mode 100644
index 0000000..2332fd8
--- /dev/null
+++ b/lib/ble/index.js
@@ -0,0 +1,254 @@
+'use strict'
+
+/** @module ble */
+/** Bluetooth Low Energy module */
+
+const util = require('util')
+const os = require('os')
+
+const log = require('../log')('ble')
+const wifi = require('../wifi')
+
+const DEVICE_NAME = process.env.DEVICE_NAME || 'intval3'
+const SERVICE_ID = process.env.SERVICE_ID || 'intval3_ble'
+const CHAR_ID = process.env.CHAR_ID || 'intval3char'
+const WIFI_ID = process.env.WIFI_ID || 'wifichar'
+const NETWORK = os.networkInterfaces()
+const MAC = getMac() || spoofMac()
+
+//Give the device a unique device name, needs to be in env
+process.env.BLENO_DEVICE_NAME += '_' + MAC
+const bleno = require('bleno')
+
+
+let currentWifi = 'disconnected'
+let currentAddr = null
+let getState
+
+const chars = []
+
+function createChar(name, uuid, prop, write, read) {
+ function characteristic () {
+ bleno.Characteristic.call(this, {
+ uuid : uuid,
+ properties: prop
+ })
+ }
+ util.inherits(characteristic, bleno.Characteristic)
+ if (prop.indexOf('read') !== -1) {
+ //data, offset, withoutResponse, callback
+ characteristic.prototype.onReadRequest = read
+ }
+ if (prop.indexOf('write') !== -1) {
+ characteristic.prototype.onWriteRequest = write
+ }
+ chars.push(new characteristic())
+}
+
+function createChars (onWrite, onRead) {
+ createChar('intval3', CHAR_ID, ['read', 'write'], onWrite, onRead)
+ createChar('wifi', WIFI_ID, ['read', 'write'], onWifiWrite, onWifiRead)
+}
+
+function onWifiWrite (data, offset, withoutResponse, callback) {
+ let result
+ let utf8
+ let obj
+ let ssid
+ let pwd
+ if (offset) {
+ log.warn(`Offset scenario`)
+ result = bleno.Characteristic.RESULT_ATTR_NOT_LONG
+ return callback(result)
+ }
+ utf8 = data.toString('utf8')
+ obj = JSON.parse(utf8)
+ ssid = obj.ssid
+ pwd = obj.pwd
+ log.info(`connecting to AP`, { ssid : ssid })
+ return wifi.createPSK(ssid, pwd, (err, hash, plaintext) => {
+ if (err) {
+ log.error('Error hashing wifi password', err)
+ result = bleno.Characteristic.RESULT_UNLIKELY_ERROR
+ return callback(result)
+ }
+ return wifi.setNetwork(ssid, plaintext, hash, (err, data) => {
+ if (err) {
+ log.error('Error configuring wifi', err)
+ result = bleno.Characteristic.RESULT_UNLIKELY_ERROR
+ return callback(result)
+ }
+ currentWifi = ssid
+ currentAddr = getIp()
+ log.info(`Connected to AP`, { ssid : ssid, ip : currentAddr })
+ result = bleno.Characteristic.RESULT_SUCCESS
+ return callback(result)
+ })
+ })
+}
+
+function onWifiRead (offset, callback) {
+ const result = bleno.Characteristic.RESULT_SUCCESS
+ const wifiRes = {}
+ let data
+ wifi.list((err, list) => {
+ if (err) {
+ result = bleno.Characteristic.RESULT_UNLIKELY_ERROR
+ return callback(result)
+ }
+ wifiRes.available = list
+ wifiRes.current = currentWifi
+ wifiRes.ip = currentAddr
+ log.info('Discovered available APs', { found : list.length })
+ data = new Buffer(JSON.stringify(wifiRes))
+ callback(result, data.slice(offset, data.length))
+ })
+}
+
+function getMac () {
+ const colonRe = new RegExp(':', 'g')
+ if (NETWORK && NETWORK.wlan0 && NETWORK.wlan0[0] && NETWORK.wlan0[0].mac) {
+ return NETWORK.wlan0[0].mac.replace(colonRe, '')
+ }
+ return undefined
+}
+
+function spoofMac () {
+ const fs = require('fs')
+ const FSPATH = require.resolve('uuid')
+ const IDFILE = os.homedir() + '/.intval3id'
+ let uuid
+ let UUIDPATH
+ let TMP
+ let MACTMP
+ let dashRe
+ delete require.cache[FSPATH]
+ if (fs.existsSync(IDFILE)) {
+ return fs.readFileSync(IDFILE, 'utf8')
+ }
+ uuid = require('uuid').v4
+ UUIDPATH = require.resolve('uuid')
+ delete require.cache[UUIDPATH]
+ TMP = uuid()
+ MACTMP = TMP.replace(dashRe, '').substring(0, 12)
+ dashRe = new RegExp('-', 'g')
+ fs.writeFileSync(IDFILE, MACTMP, 'utf8')
+ return MACTMP
+}
+
+function getIp () {
+ let addr = null
+ let ipv4
+ const ifaces = os.networkInterfaces()
+ if (ifaces && ifaces.wlan0) {
+ ipv4 = ifaces.wlan0.filter(iface => {
+ if (iface.family === 'IPv4') {
+ return iface
+ }
+ })
+ if (ipv4.length === 1) {
+ addr = ipv4[0].address
+ }
+ }
+ return addr
+}
+
+
+function capitalize (s) {
+ return s[0].toUpperCase() + s.slice(1)
+}
+
+/** Class representing the bluetooth interface */
+class BLE {
+ /**
+ * Establishes Bluetooth Low Energy services, accessible to process through this class
+ *
+ * @constructor
+ */
+ constructor (bleGetState) {
+ log.info('Starting bluetooth service')
+
+ getState = bleGetState
+
+ bleno.on('stateChange', state => {
+ log.info('stateChange', { state : state })
+ if (state === 'poweredOn') {
+ log.info('Starting advertising', { DEVICE_NAME: DEVICE_NAME, DEVICE_ID : process.env.BLENO_DEVICE_NAME })
+ bleno.startAdvertising(DEVICE_NAME, [CHAR_ID])
+ } else {
+ bleno.stopAdvertising()
+ }
+ })
+
+ bleno.on('advertisingStart', err => {
+ log.info('advertisingStart', { res : (err ? 'error ' + err : 'success') })
+ createChars(this._onWrite.bind(this), this._onRead.bind(this))
+ if (!err) {
+ bleno.setServices([
+ new bleno.PrimaryService({
+ uuid : SERVICE_ID, //hardcoded across panels
+ characteristics : chars
+ })
+ ])
+ }
+ })
+
+ bleno.on('accept', clientAddress => {
+ log.info('accept', { clientAddress : clientAddress })
+ })
+
+ bleno.on('disconnect', clientAddress => {
+ log.info('disconnect', { clientAddress : clientAddress })
+ })
+
+ wifi.getNetwork((err, ssid) => {
+ if (err) {
+ return log.error('wifi.getNetwork', err)
+ }
+ currentWifi = ssid
+ currentAddr = getIp()
+ log.info('wifi.getNetwork', {ssid : ssid, ip : currentAddr })
+ })
+ }
+ _onWrite (data, offset, withoutResponse, callback) {
+ let result = {}
+ let utf8
+ let obj
+ let fn
+ if (offset) {
+ log.warn(`Offset scenario`)
+ result = bleno.Characteristic.RESULT_ATTR_NOT_LONG
+ return callback(result)
+ }
+ utf8 = data.toString('utf8')
+ obj = JSON.parse(utf8)
+ result = bleno.Characteristic.RESULT_SUCCESS
+ fn = `_on${capitalize(obj.type)}`
+ if (obj.type && this[fn]) {
+ return this[fn](obj, () => {
+ callback(result)
+ })
+ } else {
+ return callback(result)
+ }
+
+ }
+ _onRead (offset, callback) {
+ const result = bleno.Characteristic.RESULT_SUCCESS
+ const state = getState()
+ const data = new Buffer(JSON.stringify( state ))
+ callback(result, data.slice(offset, data.length))
+ }
+ /**
+ * Binds functions to events that are triggered by BLE messages
+ *
+ * @param {string} eventName Name of the event to to bind
+ * @param {function} callback Invoked when the event is triggered
+ */
+ on (eventName, callback) {
+ this[`_on${capitalize(eventName)}`] = callback
+ }
+
+}
+
+module.exports = BLE
\ No newline at end of file
diff --git a/lib/blootstrap/index.js b/lib/blootstrap/index.js
deleted file mode 100644
index 33d9da0..0000000
--- a/lib/blootstrap/index.js
+++ /dev/null
@@ -1,32 +0,0 @@
-'use strict'
-
-const ipc = require('node-ipc')
-
-function capitalize (s) {
- return s[0].toUpperCase() + s.slice(1)
-}
-
-class Blootstrap {
- constructor () {
- this._onData = () => {}
- ipc.connectTo('blootstrap_ble', () => {
- ipc.of.blootstrap_ble.on('connect', () => {
- ipc.log(`Connected to the blootstrap_ble service`)
-
- })
- ipc.of.blootstrap_ble.on('data', data => {
- const str = data.toString()
- ipc.log(str)
- this._onData(str)
- })
- ipc.of.blootstrap_ble.on('disconnect', () => {
- ipc.log(`Disconnected from the blootstrap_ble service`)
- })
- })
- }
- on (eventName, callback) {
- this[`_on${capitalize(eventName)}`] = callback
- }
-}
-
-module.exports = new Blootstrap()
\ No newline at end of file
diff --git a/lib/db/index.js b/lib/db/index.js
new file mode 100644
index 0000000..182ab6e
--- /dev/null
+++ b/lib/db/index.js
@@ -0,0 +1,52 @@
+'use strict'
+
+const fs = require('fs')
+const os = require('os')
+const path = require('path')
+const sqlite3 = require('sqlite3').verbose()
+const squel = require('squel')
+
+const DB_FILE = path.join(os.homedir(), '.intval3.db')
+const db = new sqlite3.Database(DB_FILE)
+
+class DB {
+ constructor () {
+ this._table = 'frames'
+ this.createTable()
+ }
+ createTable () {
+ const query = `CREATE TABLE
+ IF NOT EXISTS ${this._table} (
+ dir INTEGER,
+ exposure INTEGER,
+ start INTEGER,
+ stop INTEGER,
+ len INTEGER,
+ counter INTEGER,
+ sequence INTEGER
+ );`
+ db.run(query)
+ }
+ insert (obj) {
+ const query = squel.insert()
+ .into(this._table)
+ .setFields(obj) //dir, exposure, start, stop, len, counter
+ .toString()
+ db.run(query)
+ }
+ find (where, cb) {
+ const query = squel.select()
+ .from(this._table)
+ .where(where)
+ .toString()
+ db.all(query, cb)
+ }
+ list (cb) {
+ const query = squel.select()
+ .from(this._table)
+ .toString()
+ db.all(query, cb)
+ }
+}
+
+module.exports = new DB()
\ No newline at end of file
diff --git a/lib/intval/Readme.md b/lib/intval/Readme.md
new file mode 100644
index 0000000..07fdf49
--- /dev/null
+++ b/lib/intval/Readme.md
@@ -0,0 +1,123 @@
+
+
+## intval
+Object representing the intval3 features
+
+**Kind**: global constant
+
+* [intval](#intval)
+ * [._declarePins()](#intval._declarePins)
+ * [._undeclarePins()](#intval._undeclarePins)
+ * [._startFwd()](#intval._startFwd)
+ * [._startBwd()](#intval._startBwd)
+ * [._stop()](#intval._stop)
+ * [._watchMicro(err, val)](#intval._watchMicro)
+ * [._watchRelease(err, val)](#intval._watchRelease)
+ * [.setDir([dir])](#intval.setDir)
+ * [.frame([dir], [time])](#intval.frame)
+ * [.sequence()](#intval.sequence)
+
+
+
+### intval._declarePins()
+(internal function) Declares all Gpio pins that will be used
+
+**Kind**: static method of [intval
](#intval)
+
+
+### intval._undeclarePins()
+(internal function) Undeclares all Gpio in event of uncaught error
+that interupts the node process
+
+**Kind**: static method of [intval
](#intval)
+
+
+### intval._startFwd()
+Start motor in forward direction by setting correct pins in h-bridge
+
+**Kind**: static method of [intval
](#intval)
+
+
+### intval._startBwd()
+Start motor in backward direction by setting correct pins in h-bridge
+
+**Kind**: static method of [intval
](#intval)
+
+
+### intval._stop()
+Stop motor by setting both motor pins to 0 (LOW)
+
+**Kind**: static method of [intval
](#intval)
+
+
+### intval._watchMicro(err, val)
+Callback for watching relese switch state changes.
+Using GPIO 06 on Raspberry Pi Zero W.
+
+1) If closed AND frame active, start timer, set state primed to `true`.
+1) If opened AND frame active, stop frame
+
+Microswitch + 10K ohm resistor
+* 1 === open
+* 0 === closed
+
+**Kind**: static method of [intval
](#intval)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| err | object
| Error object present if problem reading pin |
+| val | integer
| Current value of the pin |
+
+
+
+### intval._watchRelease(err, val)
+Callback for watching relese switch state changes.
+Using GPIO 05 on Raspberry Pi Zero W.
+
+1) If closed, start timer.
+2) If opened, check timer AND
+3) If `press` (`now - intval._state.release.time`) greater than minimum and less than `intval._release.seq`, start frame
+4) If `press` greater than `intval._release.seq`, start sequence
+
+Button + 10K ohm resistor
+* 1 === open
+* 0 === closed
+
+**Kind**: static method of [intval
](#intval)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| err | object
| Error object present if problem reading pin |
+| val | integer
| Current value of the pin |
+
+
+
+### intval.setDir([dir])
+Set the default direction of the camera.
+* forward = true
+* backward = false
+
+**Kind**: static method of [intval
](#intval)
+
+| Param | Type | Default | Description |
+| --- | --- | --- | --- |
+| [dir] | boolean
| true
| Direction of the camera |
+
+
+
+### intval.frame([dir], [time])
+Begin a single frame with set variables or defaults
+
+**Kind**: static method of [intval
](#intval)
+
+| Param | Type | Default | Description |
+| --- | --- | --- | --- |
+| [dir] | boolean
| "null"
| (optional) Direction of the frame |
+| [time] | integer
| "null"
| (optional) Exposure time, 0 = minimum |
+
+
+
+### intval.sequence()
+Start a sequence of frames, using defaults or explicit instructions
+
+**Kind**: static method of [intval
](#intval)
diff --git a/lib/intval/index.js b/lib/intval/index.js
index fc2d553..730fbb4 100644
--- a/lib/intval/index.js
+++ b/lib/intval/index.js
@@ -1,24 +1,423 @@
'use strict'
-const gpio = require('gpio')
+const db = require('../db')
+const log = require('../log')('intval')
+const storage = require('node-persist')
+const fs = require('fs')
-class Intval {
- constructor () {
- this._pin = {}
- this._declarePins()
- }
- _declarePins () {
- this._pin.four = gpio.export(4, {
- direction: 'out',
- interval: 100,
- ready : () => {
- console.info(`Set pin 4 to OUTPUT`)
- }
- })
- }
- status () {
- return {}
+let Gpio
+try {
+ Gpio = require('onoff').Gpio
+} catch (e) {
+ log.warn('Failed including Gpio, using sim')
+ Gpio = require('../../lib/onoffsim').Gpio
+}
+
+
+const PINS = {
+ fwd : {
+ pin : 13,
+ dir : 'out'
+ },
+ bwd : {
+ pin : 19,
+ dir : 'out'
+ },
+ micro : {
+ pin : 5,
+ dir : 'in',
+ edge : 'both'
+ },
+ release : {
+ pin : 6,
+ dir : 'in',
+ edge : 'both'
}
}
-module.exports = new Intval()
\ No newline at end of file
+/** Object representing the intval3 features */
+const intval = {}
+
+intval._frame = {
+ open : 250, //delay before pausing frame in open state
+ openBwd : 400,
+ closed : 100, //time that frame actually remains closed for
+ expected : 630 //expected length of frame, in ms
+}
+intval._release = {
+ min : 20,
+ seq : 1000
+}
+intval._microDelay = 10 // delay after stop signal before stopping motors
+intval._pin = {}
+
+/**
+ *
+ */
+
+intval.init = function () {
+ if (!fs.existsSync('./state')) fs.mkdirSync('./state')
+ storage.init({
+ dir: './state',
+ stringify: JSON.stringify,
+ parse: JSON.parse,
+ encoding: 'utf8',
+ logging: false, // can also be custom logging function
+ continuous: true, // continously persist to disk
+ interval: false, // milliseconds, persist to disk on an interval
+ ttl: false, // ttl* [NEW], can be true for 24h default or a number in MILLISECONDS
+ expiredInterval: 2 * 60 * 1000, // [NEW] every 2 minutes the process will clean-up the expired cache
+ forgiveParseErrors: false // [NEW]
+ }).then(intval._restoreState).catch((err) => {
+ log.warn('init', err)
+ intval.reset()
+ intval._declarePins()
+ })
+
+ process.on('SIGINT', intval._undeclarePins)
+ process.on('uncaughtException', intval._undeclarePins)
+}
+
+intval._restoreState = function (res) {
+ storage.getItem('_state', 'test').then(intval._setState).catch((err) => {
+ intval._setState(undefined)
+ log.error('_restoreState', err)
+ })
+ intval._declarePins()
+}
+
+intval._setState = function (data) {
+ if (typeof data !== 'undefined') {
+ intval._state = data
+ intval._state.frame.cb = () => {}
+ log.info('_setState', 'Restored intval state from disk')
+ return true
+ }
+ log.info('_setState', 'Setting state from defaults')
+ intval._state = {
+ frame : {
+ dir : true, //forward
+ start : 0, //time frame started, timestamp
+ active : false, //should frame be running
+ paused : false,
+ exposure : 0, //length of frame exposure, in ms
+ delay : 0, //delay before start of frame, in ms
+ current : {}, //current settings
+ cb : () => {}
+ },
+ release : {
+ time: 0,
+ active : false //is pressed
+ },
+ micro : {
+ time : 0,
+ primed : false //is ready to stop frame
+ },
+ counter : 0,
+ sequence : false
+ }
+ intval._storeState()
+}
+
+intval._storeState = function () {
+ storage.setItem('_state', intval._state)
+ .then(() => {})
+ .catch((err) => {
+ log.error('_storeState', err)
+ })
+}
+
+/**
+* (internal function) Declares all Gpio pins that will be used
+*
+*/
+intval._declarePins = function () {
+ let pin
+ for (let p in PINS) {
+ pin = PINS[p]
+ if (pin.edge) intval._pin[p] = Gpio(pin.pin, pin.dir, pin.edge)
+ if (!pin.edge) intval._pin[p] = Gpio(pin.pin, pin.dir)
+ log.info('_declarePins', { pin : pin.pin, dir : pin.dir, edge : pin.edge })
+ }
+ intval._pin.release.watch(intval._watchRelease)
+}
+/**
+* (internal function) Undeclares all Gpio in event of uncaught error
+* that interupts the node process
+*
+*/
+intval._undeclarePins = function (e) {
+ log.error(e)
+ if (!intval._pin) {
+ log.warn('_undeclarePins', { reason : 'No pins'})
+ return process.exit()
+ }
+ log.warn('_undeclarePins', { pin : PINS.fwd.pin, val : 0, reason : 'exiting'})
+ intval._pin.fwd.writeSync(0)
+ log.warn('_undeclarePins', { pin : PINS.bwd.pin, val : 0, reason : 'exiting'})
+ intval._pin.bwd.writeSync(0)
+ intval._pin.fwd.unexport()
+ intval._pin.bwd.unexport()
+ intval._pin.micro.unexport()
+ intval._pin.release.unexport()
+ process.exit()
+}
+/**
+* Start motor in forward direction by setting correct pins in h-bridge
+*
+*/
+intval._startFwd = function () {
+ intval._pin.fwd.writeSync(1)
+ intval._pin.bwd.writeSync(0)
+}
+/**
+* Start motor in backward direction by setting correct pins in h-bridge
+*
+*/
+intval._startBwd = function () {
+ intval._pin.fwd.writeSync(0)
+ intval._pin.bwd.writeSync(1)
+}
+
+intval._pause = function () {
+ intval._pin.fwd.writeSync(0)
+ intval._pin.bwd.writeSync(0)
+ //log.info('_pause', 'frame paused')
+}
+/**
+* Stop motor by setting both motor pins to 0 (LOW)
+*
+*/
+intval._stop = function () {
+ const entry = {}
+ const now = +new Date()
+ const len = now - intval._state.frame.start
+
+ intval._pin.fwd.writeSync(0)
+ intval._pin.bwd.writeSync(0)
+
+ log.info(`_stop`, { frame : len })
+
+ intval._pin.micro.unwatch()
+ intval._state.frame.active = false
+
+ if (intval._state.frame.cb) intval._state.frame.cb(len)
+
+ entry.start = intval._state.frame.start
+ entry.stop = now
+ entry.len = len
+ entry.dir = intval._state.frame.current.dir ? 1 : 0
+ entry.exposure = intval._state.frame.current.exposure
+ entry.counter = intval._state.counter
+ entry.sequence = intval._state.sequence ? 1 : 0
+
+ db.insert(entry)
+
+ intval._state.frame.current = {}
+}
+/**
+* Callback for watching relese switch state changes.
+* Using GPIO 06 on Raspberry Pi Zero W.
+*
+* 1) If closed AND frame active, start timer, set state primed to `true`.
+* 1) If opened AND frame active, stop frame
+*
+* Microswitch + 10K ohm resistor
+* * 1 === open
+* * 0 === closed
+*
+*
+* @param {object} err Error object present if problem reading pin
+* @param {integer} val Current value of the pin
+*
+*/
+intval._watchMicro = function (err, val) {
+ const now = +new Date()
+ if (err) {
+ log.error('_watchMicro', err)
+ }
+ //log.info(`Microswitch val: ${val}`)
+ //determine when to stop
+ if (val === 0 && intval._state.frame.active) {
+ if (!intval._state.micro.primed) {
+ intval._state.micro.primed = true
+ intval._state.micro.time = now
+ log.info('Microswitch primed to stop motor')
+ }
+ } else if (val === 1 && intval._state.frame.active) {
+ if (intval._state.micro.primed && !intval._state.micro.paused && (now - intval._state.frame.start) > intval._frame.open) {
+ intval._state.micro.primed = false
+ intval._state.micro.time = 0
+ setTimeout( () => {
+ intval._stop()
+ }, intval._microDelay)
+ }
+ }
+}
+/**
+* Callback for watching relese switch state changes.
+* Using GPIO 05 on Raspberry Pi Zero W.
+*
+* 1) If closed, start timer.
+* 2) If opened, check timer AND
+* 3) If `press` (`now - intval._state.release.time`) greater than minimum and less than `intval._release.seq`, start frame
+* 4) If `press` greater than `intval._release.seq`, start sequence
+*
+* Button + 10K ohm resistor
+* * 1 === open
+* * 0 === closed
+*
+* @param {object} err Error object present if problem reading pin
+* @param {integer} val Current value of the pin
+*
+*/
+intval._watchRelease = function (err, val) {
+ const now = +new Date()
+ let press = 0
+ if (err) {
+ return log.error(err)
+ }
+ //log.info(`Release switch val: ${val}`)
+ if (val === 0) {
+ //closed
+ if (intval._releaseClosedState(now)) {
+ intval._state.release.time = now
+ intval._state.release.active = true //maybe unncecessary
+ }
+ } else if (val === 1) {
+ //opened
+ if (intval._state.release.active) {
+ press = now - intval._state.release.time
+ if (press > intval._release.min && press < intval._release.seq) {
+ intval.frame()
+ } else if (press >= intval._release.seq) {
+ intval.sequence()
+ }
+ //log.info(`Release closed for ${press}ms`)
+ intval._state.release.time = 0
+ intval._state.release.active = false
+ }
+ }
+}
+
+intval._releaseClosedState = function (now) {
+ if (!intval._state.release.active && intval._state.release.time === 0) {
+ return true
+ }
+ if (intval._state.release.active && (now - intval._state.release.time) > (intval._release.seq * 10)) {
+ return true
+ }
+ return false
+}
+
+intval.reset = function () {
+ intval._setState()
+ intval._storeState()
+}
+
+/**
+* Set the default direction of the camera.
+* * forward = true
+* * backward = false
+*
+* @param {boolean} [dir=true] Direction of the camera
+*
+*/
+intval.setDir = function (val = true) {
+ if (typeof val !== 'boolean') {
+ return log.warn('Direction must be represented as either true or false')
+ }
+ intval._state.frame.dir = val
+ intval._storeState()
+ log.info('setDir', { direction : val ? 'forward' : 'backward' })
+}
+
+intval.setExposure = function (val = 0) {
+ intval._state.frame.exposure = val
+ intval._storeState()
+ log.info('setExposure', { exposure : val })
+}
+
+intval.setDelay = function (val = 0) {
+ intval._state.frame.delay = val
+ intval._storeState()
+ log.info('setDelay', { delay : val })
+}
+intval.setCounter = function (val = 0) {
+ intval._state.counter = val
+ intval._storeState()
+ log.info('setCounter', { counter : val })
+}
+/**
+* Begin a single frame with set variables or defaults
+*
+* @param {?boolean} [dir="null"] (optional) Direction of the frame
+* @param {?integer} [exposure="null"] (optional) Exposure time, 0 = minimum
+*
+*/
+intval.frame = function (dir = null, exposure = null, cb = () => {}) {
+ if (dir === true || (dir === null && intval._state.frame.dir === true) ) {
+ dir = true
+ } else {
+ dir = false
+ }
+
+ if (exposure === null && intval._state.frame.exposure !== 0) {
+ exposure = intval._state.frame.exposure
+ } else if (exposure === null) {
+ exposure = 0 //default speed
+ }
+
+ intval._state.frame.start = +new Date()
+ intval._state.frame.active = true
+ intval._pin.micro.watch(intval._watchMicro)
+
+ log.info('frame', {dir : dir ? 'forward' : 'backward', exposure : exposure})
+
+ if (dir) {
+ intval._startFwd()
+ } else {
+ intval._startBwd()
+ }
+ if (exposure !== 0) {
+ intval._state.frame.paused = true
+ if (dir) {
+ setTimeout(intval._pause, intval._frame.open)
+ //log.info('frame', { pausing : time + intval._frame.open })
+ setTimeout( () => {
+ intval._state.frame.paused = false
+ intval._startFwd()
+ }, exposure + intval._frame.closed)
+ } else {
+ setTimeout(intval._pause, intval._frame.openBwd)
+ setTimeout( () => {
+ //log.info('frame', 'restarting')
+ intval._state.frame.paused = false
+ intval._startBwd()
+ }, exposure + intval._frame.closed)
+ }
+ }
+ if (dir) {
+ intval._state.frame.cb = (len) => {
+ intval._state.counter++
+ intval._storeState()
+ cb(len)
+ }
+ } else {
+ intval._state.frame.cb = (len) => {
+ intval._state.counter--
+ intval._storeState()
+ cb(len)
+ }
+ }
+ intval._state.frame.current = {
+ dir: dir,
+ exposure: exposure
+ }
+}
+
+intval.status = function () {
+ return intval._state
+}
+
+module.exports = intval
\ No newline at end of file
diff --git a/lib/log/Readme.md b/lib/log/Readme.md
new file mode 100644
index 0000000..61f4e44
--- /dev/null
+++ b/lib/log/Readme.md
@@ -0,0 +1,13 @@
+
+
+## createLog(label, filename) ⇒ object
+createLog() - Returns a winston logger configured to service
+
+**Kind**: global function
+**Returns**: object
- Winston logger
+
+| Param | Type | Default | Description |
+| --- | --- | --- | --- |
+| label | string
| | Label appearing on logger |
+| filename | string
| null
| Optional file to write log to |
+
diff --git a/lib/log/index.js b/lib/log/index.js
new file mode 100644
index 0000000..8527559
--- /dev/null
+++ b/lib/log/index.js
@@ -0,0 +1,22 @@
+'use strict'
+
+const winston = require('winston')
+
+/**
+* createLog() - Returns a winston logger configured to service
+*
+* @param {string} label Label appearing on logger
+* @param {string} filename Optional file to write log to
+* @returns {object} Winston logger
+*/
+function createLog (label, filename = null) {
+ const transports = [ new (winston.transports.Console)({ label : label }) ]
+ if (filename !== null) {
+ transports.push( new (winston.transports.File)({ label : label, filename : filename }) )
+ }
+ return new (winston.Logger)({
+ transports: transports
+ })
+}
+
+module.exports = createLog
\ No newline at end of file
diff --git a/lib/mscript/Readme.md b/lib/mscript/Readme.md
new file mode 100644
index 0000000..611eefa
--- /dev/null
+++ b/lib/mscript/Readme.md
@@ -0,0 +1,35 @@
+
+
+## mscript
+Object representing mscript parser
+
+**Kind**: global constant
+
+* [mscript](#mscript)
+ * [.arg(shrt, lng)](#mscript.arg)
+ * [.arg_pos(shrt, lng)](#mscript.arg_pos)
+
+
+
+### mscript.arg(shrt, lng)
+Determine whether or not argument flag has been set
+
+**Kind**: static method of [mscript
](#mscript)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| shrt | string
| Short flag name (ie `-a`) |
+| lng | string
| Long flag name (ie `--apple`) |
+
+
+
+### mscript.arg_pos(shrt, lng)
+Determine position of flag, in argument array
+
+**Kind**: static method of [mscript
](#mscript)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| shrt | string
| Short flag name (ie `-a`) |
+| lng | string
| Long flag name (ie `--apple`) |
+
diff --git a/lib/mscript/index.js b/lib/mscript/index.js
new file mode 100644
index 0000000..c12700e
--- /dev/null
+++ b/lib/mscript/index.js
@@ -0,0 +1,441 @@
+'use strict'
+
+let fs
+let input;
+
+/** Object representing mscript parser */
+const mscript = {}
+
+/**
+* Determine whether or not argument flag has been set
+*
+*
+* @param {string} shrt Short flag name (ie `-a`)
+* @param {string} lng Long flag name (ie `--apple`)
+*
+*/
+mscript.arg = function arg (shrt, lng) {
+ if (process.argv.indexOf(shrt) !== -1 ||
+ process.argv.indexOf(lng) !== -1) {
+ return true
+ }
+ return false
+}
+/**
+* Determine position of flag, in argument array
+*
+*
+* @param {string} shrt Short flag name (ie `-a`)
+* @param {string} lng Long flag name (ie `--apple`)
+*
+*/
+mscript.arg_pos = function arg_pos (shrt, lng) {
+ let pos = process.argv.indexOf(shrt)
+ if (pos === -1) {
+ pos = process.argv.indexOf(lng)
+ }
+ return pos
+}
+
+mscript.black = '0,0,0'
+
+mscript.cmd = [
+ 'CF',
+ 'PF',
+ 'BF',
+ 'CB',
+ 'PB',
+ 'BB',
+ 'D'
+]
+mscript.alts = {
+ 'CF' : ['CAMERA FORWARD', 'CAM FORWARD', 'C'],
+ 'PF' : ['PROJECTOR FORWARD', 'PROJ FORWARD', 'P'],
+ 'BF' : ['BLACK FORWARD'],
+ 'CB' : ['CAMERA BACKWARD', 'CAM BACKWARD', 'CAMERA BACK', 'CAM BACK'],
+ 'PB' : ['PROJECTOR FORWARD', 'PROJ FORWARD', 'PROJECTOR BACK', 'PROJ BACK'],
+ 'BB' : ['BLACK BACKWARD', 'BLACK BACK'],
+ 'L ' : ['LIGHT', 'COLOR', 'LAMP']
+}
+
+mscript.state = {}
+//TODO: This will memory leak
+mscript.state_clear = function state_clear () {
+ mscript.state = {
+ cam : 0,
+ proj : 0,
+ color : '',
+ loops : [],
+ rec : -1
+ }
+}
+
+mscript.alts_unique = function alts_unique () {
+ const ids = Object.keys(mscript.alts)
+ const all = []
+ for (let i = 0; i < ids.length; i++) {
+ if (all.indexOf(ids[i]) === -1) {
+ all.push(ids[i])
+ } else {
+ mscript.fail(1, "Can't parse")
+ }
+ }
+}
+
+mscript.interpret = function interpret (text, callback) {
+ mscript.state_clear()
+ if (typeof text === 'undefined') {
+ mscript.fail(2, 'No input')
+ }
+ const lines = text.split('\n')
+ const arr = []
+ const light = []
+ const output = {}
+
+ let two = ''
+ let target = 0
+ let dist = 0 //?
+ let x
+
+ //loop through all lines
+ for (let line of lines) {
+ //preprocess line
+ line = mscript.preprocess(line)
+ two = line.substring(0, 2)
+
+ if (mscript.cmd.indexOf(two) !== -1) {
+ if (mscript.state.loops.length > 0) {
+ //hold generated arr in state loop array
+ mscript.state.loops[mscript.state.rec].arr.push.apply(mscript.state.loops[mscript.state.rec].arr, mscript.str_to_arr(line, two))
+ mscript.state.loops[mscript.state.rec].light.push.apply(mscript.state.loops[mscript.state.rec].light, mscript.light_to_arr(line, two))
+ } else {
+ arr.push.apply(arr, mscript.str_to_arr(line, two))
+ light.push.apply(light, mscript.light_to_arr(line, two))
+ }
+
+ } else if (line.substring(0, 4) === 'LOOP') {
+ mscript.state.rec++
+ mscript.state.loops[mscript.state.rec] = {
+ arr : [],
+ light : [],
+ cam : 0,
+ proj : 0,
+ cmd : line + ''
+ }
+ } else if (line.substring(0, 2) === 'L ') {
+ mscript.light_state(line)
+ } else if (line.substring(0, 3) === 'END') {
+ for (x = 0; x < mscript.loop_count(mscript.state.loops[mscript.state.rec].cmd); x++) {
+ if (mscript.state.rec === 0) {
+ arr.push.apply(arr, mscript.state.loops[mscript.state.rec].arr);
+ light.push.apply(light, mscript.state.loops[mscript.state.rec].light);
+ } else if (mscript.state.rec >= 1) {
+ mscript.state.loops[mscript.state.rec - 1].arr.push.apply(mscript.state.loops[mscript.state.rec - 1].arr, mscript.state.loops[mscript.state.rec].arr)
+ mscript.state.loops[mscript.state.rec - 1].light.push.apply(mscript.state.loops[mscript.state.rec - 1].light, mscript.state.loops[mscript.state.rec].light)
+ }
+ }
+ mscript.state_update('END', mscript.loop_count(mscript.state.loops[mscript.state.rec].cmd));
+ delete mscript.state.loops[mscript.state.rec]
+ mscript.state.rec--
+ } else if (line.substring(0, 3) === 'CAM') { //directly go to that frame (black?)
+ target = parseInt(line.split('CAM ')[1])
+ if (mscript.state.loops.length > 0) {
+ if (target > mscript.state.cam) {
+ dist = target - mscript.state.cam
+ for (x = 0; x < dist; x++) {
+ mscript.state.loops[mscript.state.rec].arr.push('BF')
+ mscript.state.loops[mscript.state.rec].light.push(mscript.black)
+ mscript.state_update('BF')
+ }
+ } else {
+ dist = mscript.state.cam - target
+ for (x = 0; x < dist; x++) {
+ mscript.state.loops[mscript.state.rec].arr.push('BB')
+ mscript.state.loops[mscript.state.rec].light.push(mscript.black)
+ mscript.state_update('BB')
+ }
+ }
+ } else {
+ if (target > mscript.state.cam) {
+ dist = target - mscript.state.cam
+ for (x = 0; x < dist; x++) {
+ arr.push('BF')
+ light.push(mscript.black)
+ mscript.state_update('BF')
+ }
+ } else {
+ dist = mscript.state.cam - target
+ for (x = 0; x < dist; x++) {
+ arr.push('BB')
+ light.push(mscript.black)
+ mscript.state_update('BB')
+ }
+ }
+ }
+ } else if (line.substring(0, 4) === 'PROJ') { //directly go to that frame
+ target = parseInt(line.split('PROJ ')[1])
+ if (mscript.state.loops.length > 0) {
+ if (target > mscript.state.proj) {
+ dist = target - mscript.state.proj
+ for (x = 0; x < dist; x++) {
+ mscript.state.loops[mscript.state.rec].arr.push('PF')
+ mscript.state.loops[mscript.state.rec].light.push('')
+ mscript.state_update('PF')
+ }
+ } else {
+ dist = mscript.state.proj - target
+ for (x = 0; x < dist; x++) {
+ mscript.state.loops[mscript.state.rec].arr.push('PB')
+ mscript.state.loops[mscript.state.rec].light.push('')
+ mscript.state_update('PB')
+ }
+ }
+ } else {
+ if (target > mscript.state.proj) {
+ dist = target - mscript.state.proj
+ for (x = 0; x < dist; x++) {
+ arr.push('PF')
+ light.push('')
+ mscript.state_update('PF')
+ }
+ } else {
+ dist = mscript.state.proj - target
+ for (x = 0; x < dist; x++) {
+ arr.push('PB')
+ light.push('')
+ mscript.state_update('PB');
+ }
+ }
+ }
+ } else if (line.substring(0, 3) === 'SET') { //set that state
+ if (line.substring(0, 7) === 'SET CAM') {
+ mscript.state.cam = parseInt(line.split('SET CAM')[1]);
+ } else if (line.substring(0, 8) === 'SET PROJ') {
+ mscript.state.proj = parseInt(line.split('SET PROJ')[1]);
+ }
+ } else if (line.substring(0, 1) === '#' || line.substring(0, 2) === '//') {
+ //comments
+ //ignore while parsing
+ }
+ }
+ output.success = true
+ output.arr = arr
+ output.light = light
+ output.cam = mscript.state.cam
+ output.proj = mscript.state.proj
+ if (typeof callback !== 'undefined') {
+ //should only be invoked by running mscript.tests()
+ callback(output)
+ } else {
+ return mscript.output(output)
+ }
+}
+
+mscript.preprocess = function preprocess (line) {
+ line = line.replace(/\t+/g, '') //strip tabs
+ line = line.trim() //remove excess whitespace before and after command
+ line = line.toUpperCase()
+ return line
+}
+
+mscript.last_loop = function last_loop () {
+ return mscript.state.loops[mscript.state.loops.length - 1]
+}
+
+mscript.parent_loop = function parent_loop () {
+ return mscript.state.loops[mscript.state.loops.length - 2]
+}
+
+mscript.state_update = function state_update (cmd, val) {
+ if (cmd === 'END') {
+ for (var i = 0; i < val; i++) {
+ if (mscript.state.rec === 0) {
+ mscript.state.cam += mscript.state.loops[mscript.state.rec].cam
+ mscript.state.proj += mscript.state.loops[mscript.state.rec].proj
+ } else if (mscript.state.rec >= 1) {
+ mscript.state.loops[mscript.state.rec - 1].cam += mscript.state.loops[mscript.state.rec].cam
+ mscript.state.loops[mscript.state.rec - 1].proj += mscript.state.loops[mscript.state.rec].proj
+ }
+ }
+ } else if (cmd === 'CF') {
+ if (mscript.state.loops.length < 1) {
+ mscript.state.cam++
+ } else {
+ mscript.state.loops[mscript.state.rec].cam++
+ }
+ } else if (cmd === 'CB') {
+ if (mscript.state.loops.length < 1) {
+ mscript.state.cam--
+ } else {
+ mscript.state.loops[mscript.state.rec].cam--
+ }
+ } else if (cmd === 'PF') {
+ if (mscript.state.loops.length < 1) {
+ mscript.state.proj++
+ } else {
+ mscript.state.loops[mscript.state.rec].proj++
+ }
+ } else if (cmd === 'PB') {
+ if (mscript.state.loops.length < 1) {
+ mscript.state.proj--
+ } else {
+ mscript.state.loops[mscript.state.rec].proj--
+ }
+ } else if (cmd === 'BF') {
+ if (mscript.state.loops.length < 1) {
+ mscript.state.cam++
+ } else {
+ mscript.state.loops[mscript.state.rec].cam++
+ }
+ } else if (cmd === 'BB') {
+ if (mscript.state.loops.length < 1) {
+ mscript.state.cam--
+ } else {
+ mscript.state.loops[mscript.state.rec].cam++
+ }
+ } else if (cmd === 'L ') {
+ //TODO : ????
+ }
+}
+
+mscript.str_to_arr = function str_to_arr (str, cmd) {
+ const cnt = str.split(cmd)
+ let arr = []
+ let c = parseInt(cnt[1])
+
+ if (cnt[1] === '') {
+ c = 1
+ } else {
+ c = parseInt(cnt[1])
+ }
+ for (var i = 0; i < c; i++) {
+ arr.push(cmd)
+ mscript.state_update(cmd)
+ }
+ return arr
+}
+
+mscript.light_state = function light_state (str) {
+ //add parsers for other color spaces
+ const color = str.replace('L ', '').trim()
+ mscript.state.color = color
+}
+
+mscript.light_to_arr = function light_to_arr (str, cmd) {
+ const cnt = str.split(cmd)
+ const arr = []
+ let c = parseInt(cnt[1])
+
+ if (cnt[1] === '') {
+ c = 1
+ } else {
+ c = parseInt(cnt[1])
+ }
+ for (var i = 0; i < c; i++) {
+ if (cmd === 'CF' || cmd === 'CB') {
+ arr.push(mscript.state.color)
+ } else if (cmd === 'BF' || cmd === 'BB') {
+ arr.push(mscript.black)
+ } else {
+ arr.push('')
+ }
+ }
+ return arr
+}
+
+mscript.loop_count = function loop_count (str) {
+ return parseInt(str.split('LOOP ')[1])
+}
+
+mscript.fail = function fail (code, reason) {
+ const obj = { success: false, error: true, msg : reason }
+ console.error(JSON.stringify(obj))
+ if (process) process.exit()
+}
+
+mscript.output = function output (data) {
+ let json = true; //default
+ if (mscript.arg('-j', '--json')) {
+ json = true
+ }
+
+ if (mscript.arg('-t', '--text')) {
+ json = false
+ }
+
+ if (json) {
+ console.log(JSON.stringify(data))
+ } else {
+ var ids = Object.keys(data)
+ for (var i = 0; i < ids.length; i++) {
+ console.log(ids[i] + ': ' + data[ids[i]])
+ }
+ }
+}
+
+mscript.init = function init () {
+ if (mscript.arg('-t', '--tests')) {
+ return mscript.tests()
+ }
+
+ if (mscript.arg('-v', '--verbose')) {
+ console.time('mscript')
+ }
+
+ if (mscript.arg('-c', '--cam')) {
+ mscript.state.cam = parseInt(process.argv[mscript.arg_pos('-c', '--cam') + 1])
+ }
+
+ if (mscript.arg('-p', '--proj')) {
+ mscript.state.proj = parseInt(process.argv[mscript.arg_pos('-p', '--proj') + 1])
+ }
+
+ if (mscript.arg('-f', '--file')) {
+ input = process.argv[mscript.arg_pos('-f', '--file') + 1]
+ mscript.interpret(fs.readFileSync(input, 'utf8'))
+ } else {
+ mscript.interpret(input)
+ }
+
+ if (mscript.arg('-v', '--verbose')) {
+ console.timeEnd('mscript')
+ }
+};
+
+if (typeof document === 'undefined' && typeof module !== 'undefined' && !module.parent) {
+ //node script
+ fs = require('fs')
+ input = process.argv[2]
+ mscript.init()
+} else if (typeof module !== 'undefined' && module.parent) {
+ //module
+ fs = require('fs')
+ module.exports = mscript
+} else {
+ //web
+}
+
+
+/*
+
+CAM # - go to camera frame #
+PROJ # - go to projector frame #
+
+SET CAM # - sets camera count to #
+SET PROJ # - sets projector count to #
+
+LOOP # - begin loop, can nest recursively, # times
+END LOOP - (or END) closes loop
+
+L #RGB - sets light to rgb value
+
+FADE
+
+CF - Camera forwards
+PF - Projector forwards
+BF - Black forwards
+CB - Camera backwards
+PB - Projector backwards
+BB - Black backwards
+
+*/
\ No newline at end of file
diff --git a/lib/onoffsim/Readme.md b/lib/onoffsim/Readme.md
new file mode 100644
index 0000000..144b474
--- /dev/null
+++ b/lib/onoffsim/Readme.md
@@ -0,0 +1,20 @@
+
+
+## onoffsim
+Object representing a fake onoff Gpio class
+
+**Kind**: global constant
+
+
+### onoffsim.Gpio(no, dir, additional) ⇒ object
+Returns a Gpio class in the case of running on a dev machine
+
+**Kind**: static method of [onoffsim
](#onoffsim)
+**Returns**: object
- Fake Gpio object
+
+| Param | Type | Description |
+| --- | --- | --- |
+| no | integer
| Number of the GPIO pin |
+| dir | string
| Dirction of the pin, 'input' or 'output' |
+| additional | string
| Additional instructions for the GPIO pin, for 'input' type |
+
diff --git a/lib/onoffsim/index.js b/lib/onoffsim/index.js
new file mode 100644
index 0000000..88b8c70
--- /dev/null
+++ b/lib/onoffsim/index.js
@@ -0,0 +1,35 @@
+'use strict'
+
+/** Object representing a fake onoff Gpio class */
+const onoffsim = {
+ /**
+ * Returns a Gpio class in the case of running on a dev machine
+ *
+ * @param {integer} no Number of the GPIO pin
+ * @param {string} dir Dirction of the pin, 'input' or 'output'
+ * @param {string} additional Additional instructions for the GPIO pin, for 'input' type
+ * @returns {object} Fake Gpio object
+ */
+ Gpio : function (no, dir = 'in', additional = 'none') {
+ return {
+ no : no,
+ dir : dir,
+ additional : additional,
+ val : null,
+ watchFunc : null,
+ set : function (val) {
+ console.log(`onoffsim set ${this.no} to ${val}`)
+ },
+ get : function () {
+ return this.val
+ },
+ watch : function (cb) {
+ this.watchFunc = cb
+ },
+ unexport : function () {
+ }
+ }
+ }
+}
+
+module.exports = onoffsim
\ No newline at end of file
diff --git a/lib/sequence/index.js b/lib/sequence/index.js
new file mode 100644
index 0000000..f60d86e
--- /dev/null
+++ b/lib/sequence/index.js
@@ -0,0 +1,114 @@
+'use strict'
+
+const uuid = require('uuid').v4
+const log = require('../log')('seq')
+
+/** Object sequence features */
+const sequence = {};
+
+sequence._state = {
+ arr : [],
+ active : false,
+ paused : false,
+ frame: false,
+ delay : false,
+ count : 0,
+ stop : null
+}
+
+sequence._loop = {
+ arr : [],
+ count : 0,
+ max : 0
+}
+
+sequence.start = function (options, cb) {
+ if (sequence._state.active) {
+ return false
+ }
+
+ sequence._state.active = true
+ sequence._state.count = 0
+
+ if (options.arr) {
+ sequence._state.arr = options.arr
+ }
+
+ if (options.loop) {
+ sequence._loop.arr = options.loop
+ sequence._loop.count = 0
+ }
+
+ if (options.maxLoop) {
+ sequence._loop.max = options.maxLoop
+ } else {
+ sequence._loop.max = 0
+ }
+ sequence._state.stop = cb
+ sequence.step()
+ sequence._state.id = uuid()
+ return sequence._state.id
+}
+
+sequence.setStop = function () {
+ sequence._state.active = false
+}
+
+sequence.stop = function () {
+ sequence._state.active = false
+ sequence._state.count = 0
+ sequence._state.arr = []
+
+ sequence._loop.count = 0
+ sequence._loop.max = 0
+ sequence._loop.arr = []
+
+ if (sequence._state.stop) sequence._state.stop()
+
+ sequence._state.stop = null
+}
+
+sequence.pause = function () {
+ sequence._state.paused = true
+}
+
+sequence.resume = function () {
+ sequence._state.paused = false
+ sequence.step()
+}
+
+sequence.step = function () {
+ if (sequence._state.active && !sequence._state.paused) {
+ if (sequence._state.arr.length > 0) {
+ if (sequence._state.count > sequence._state.arr.length - 1) {
+ return sequence.stop()
+ }
+ log.info('step', { count : sequence._state.count, id : sequence._state.id })
+ return sequence._state.arr[sequence._state.count](() => {
+ sequence._state.count++
+ sequence.step()
+ })
+ } else if (sequence._loop.arr.length > 0) {
+ if (sequence._state.count > sequence._loop.arr.length - 1) {
+ sequence._state.count = 0
+ sequence._loop.count++
+ }
+ if (sequence._loop.max > 0 && sequence._loop.count > sequence._loop.max) {
+ return sequence.stop()
+ }
+ log.info('step', { count : sequence._state.count, id : sequence._state.id })
+ return sequence._loop.arr[sequence._state.count](() => {
+ sequence._state.count++
+ sequence.step()
+ })
+ } else{
+ return sequence.stop()
+ }
+ } else if (sequence._state.paused) {
+ log.info('step', 'Sequence paused', { loop : sequence._loop.count, count : sequence._state.count })
+ } else if (!sequence._state.active) {
+ log.info('step', 'Sequence stopped', { loop : sequence._loop.count, count : sequence._state.count })
+ }
+}
+
+module.exports = sequence
\ No newline at end of file
diff --git a/lib/wifi/Readme.md b/lib/wifi/Readme.md
new file mode 100644
index 0000000..af31581
--- /dev/null
+++ b/lib/wifi/Readme.md
@@ -0,0 +1,102 @@
+
+
+## Wifi
+Class representing the wifi features
+
+**Kind**: global class
+
+* [Wifi](#Wifi)
+ * [.list(callback)](#Wifi+list)
+ * [._readConfigCb(err, data)](#Wifi+_readConfigCb)
+ * [._writeConfigCb(err)](#Wifi+_writeConfigCb)
+ * [._reconfigureCb(err, stdout, stderr)](#Wifi+_reconfigureCb)
+ * [._refreshCb(err, stdout, stderr)](#Wifi+_refreshCb)
+ * [.setNetwork(ssid, pwd, callback)](#Wifi+setNetwork)
+ * [.getNetwork(callback)](#Wifi+getNetwork)
+
+
+
+### wifi.list(callback)
+List available wifi access points
+
+**Kind**: instance method of [Wifi
](#Wifi)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| callback | function
| Function which gets invoked after list is returned |
+
+
+
+### wifi._readConfigCb(err, data)
+(internal function) Invoked after config file is read,
+then invokes file write on the config file
+
+**Kind**: instance method of [Wifi
](#Wifi)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| err | object
| (optional) Error object only present if problem reading config file |
+| data | string
| Contents of the config file |
+
+
+
+### wifi._writeConfigCb(err)
+(internal function) Invoked after config file is written,
+then executes reconfiguration command
+
+**Kind**: instance method of [Wifi
](#Wifi)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| err | object
| (optional) Error object only present if problem writing config file |
+
+
+
+### wifi._reconfigureCb(err, stdout, stderr)
+(internal function) Invoked after reconfiguration command is complete
+
+**Kind**: instance method of [Wifi
](#Wifi)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| err | object
| (optional) Error object only present if configuration command fails |
+| stdout | string
| Standard output from reconfiguration command |
+| stderr | string
| Error output from command if fails |
+
+
+
+### wifi._refreshCb(err, stdout, stderr)
+(internal function) Invoked after wifi refresh command is complete
+
+**Kind**: instance method of [Wifi
](#Wifi)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| err | object
| (optional) Error object only present if refresh command fails |
+| stdout | string
| Standard output from refresh command |
+| stderr | string
| Error output from command if fails |
+
+
+
+### wifi.setNetwork(ssid, pwd, callback)
+Function which initializes the processes for adding a wifi access point authentication
+
+**Kind**: instance method of [Wifi
](#Wifi)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| ssid | string
| SSID of network to configure |
+| pwd | string
| Password of access point, plaintext |
+| callback | function
| Function invoked after process is complete, or fails |
+
+
+
+### wifi.getNetwork(callback)
+Executes command which gets the currently connected network
+
+**Kind**: instance method of [Wifi
](#Wifi)
+
+| Param | Type | Description |
+| --- | --- | --- |
+| callback | function
| Function which is invoked after command is completed |
+
diff --git a/lib/wifi/index.js b/lib/wifi/index.js
index f330df4..193f4d7 100644
--- a/lib/wifi/index.js
+++ b/lib/wifi/index.js
@@ -9,15 +9,24 @@ const refresh = '/sbin/ifdown wlan0 && /sbin/ifup --force wlan0'
const iwlist = '/sbin/iwlist wlan0 scanning | grep "ESSID:"'
const iwgetid = '/sbin/iwgetid'
+const log = require('../log')('wifi')
const exec = require('child_process').exec
const fs = require('fs')
-class wifi {
+let _entry = null
+let _ssid = null
+let _cb = null
+
+/** Class representing the wifi features */
+class Wifi {
constructor () {
- this._callback = () => {}
- this._entry = null
- this._ssid = null
+
}
+ /**
+ * List available wifi access points
+ *
+ * @param {function} callback Function which gets invoked after list is returned
+ */
list (callback) {
exec(iwlist, (err, stdout, stderr) => {
if (err) {
@@ -25,69 +34,175 @@ class wifi {
return callback(err)
}
const lines = stdout.split('\n')
- const output = []
+ let output = []
let line
+ let i = 0
for (let l of lines) {
line = l.replace('ESSID:', '').trim()
- if (line !== '""') {
+ if (line !== '""' && i < 5) {
line = line.replace(quoteRe, '')
output.push(line)
}
+ i++
}
+ output = output.filter(ap => {
+ if (ap !== '') return ap
+ })
return callback(null, output)
})
}
+ /**
+ * (internal function) Invoked after config file is read,
+ * then invokes file write on the config file
+ *
+ * @param {object} err (optional) Error object only present if problem reading config file
+ * @param {string} data Contents of the config file
+ */
_readConfigCb (err, data) {
+ let parsed
+ let current
if (err) {
console.error(err)
- return this._callback(err)
+ return _cb(err)
}
- if (data.search(networkPattern) === -1) {
- data += `\n${this._entry}`
+ parsed = this._parseConfig(data)
+ current = parsed.find(network => {
+ return network.ssid === _ssid
+ })
+ if (typeof current !== 'undefined') {
+ data = data.replace(current.raw, _entry)
} else {
- data = data.replace(networkPattern, this._entry)
+ data += '\n\n' + _entry
}
- this._entry = null
- fs.writeFile(filePath, data, 'utf8', this._writeConfigCb)
+ _entry = null
+ fs.writeFile(filePath, data, 'utf8', this._writeConfigCb.bind(this))
}
+ /**
+ * (internal function) Invoked after config file is written,
+ * then executes reconfiguration command
+ *
+ * @param {object} err (optional) Error object only present if problem writing config file
+ */
_writeConfigCb (err) {
if (err) {
console.error(err)
- return this._callback(err)
+ return _cb(err)
}
- exec(reconfigure, this._reconfigureCb)
+ exec(reconfigure, this._reconfigureCb.bind(this))
}
+ /**
+ * (internal function) Invoked after reconfiguration command is complete
+ *
+ * @param {object} err (optional) Error object only present if configuration command fails
+ * @param {string} stdout Standard output from reconfiguration command
+ * @param {string} stderr Error output from command if fails
+ */
_reconfigureCb (err, stdout, stderr) {
if (err) {
console.error(err)
- return this._callback(err)
+ return _cb(err)
}
console.log('Wifi reconfigured')
- exec(refresh, this._refreshCb)
+ exec(refresh, this._refreshCb.bind(this))
}
+ /**
+ * (internal function) Invoked after wifi refresh command is complete
+ *
+ * @param {object} err (optional) Error object only present if refresh command fails
+ * @param {string} stdout Standard output from refresh command
+ * @param {string} stderr Error output from command if fails
+ */
_refreshCb (err, stdout, stderr) {
if (err) {
console.error(err)
- return this._callback(err)
+ return _cb(err)
}
console.log('Wifi refreshed')
- //this._callback(null, { ssid : ssid, pwd : pwd.length })
- this._callback = () => {}
+ _cb(null, { ssid : _ssid })
+ _cb = () => {}
}
- setNetwork (ssid, pwd, callback) {
- this._entry = `network={\n\tssid="${ssid}"\n\tpsk="${pwd}"\n}\n`
- this._callback = callback
- this._ssid = ssid
- fs.readFile(filePath, 'utf8', this._readConfigCb)
+ _parseConfig (str) {
+ const networks = []
+ const lines = str.split('\n')
+ let network = {}
+ for (let line of lines) {
+ if (line.substring(0, 9) === 'network={') {
+ network = {}
+ network.raw = line
+ } else if (network.raw && line.indexOf('ssid=') !== -1) {
+ network.ssid = line.replace('ssid=', '').trim().replace(quoteRe, '')
+ if (network.raw) {
+ network.raw += '\n' + line
+ }
+ } else if (network.raw && line.substring(0, 1) === '}') {
+ network.raw += '\n' + line
+ networks.push(network)
+ network = {}
+ } else if (network.raw) {
+ network.raw += '\n' + line
+ }
+ }
+ return networks
}
+ /**
+ * Create sanitized wpa_supplicant.conf stanza for
+ * configuring wifi without storing plaintext passwords
+ * @example
+ * network={
+ * ssid="YOUR_SSID"
+ * #psk="YOUR_PASSWORD"
+ * psk=6a24edf1592aec4465271b7dcd204601b6e78df3186ce1a62a31f40ae9630702
+ * }
+ *
+ * @param {string} ssid SSID of wifi network
+ * @param {string} pwd Plaintext passphrase of wifi network
+ * @param {function} callback Function called after psk hash is generated
+ */
+ createPSK (ssid, pwd, callback) {
+ const cmd = `wpa_passphrase "${ssid}" "${pwd}" | grep "psk="`
+ let lines
+ let hash
+ let plaintext
+ exec(cmd, (err, stdout, stderr) => {
+ if (err) {
+ return callback(err)
+ }
+ lines = stdout.replace('#psk=', '').split('psk=')
+ hash = lines[1]
+ plaintext = lines[0]
+ callback(null, hash.trim(), plaintext.trim())
+ })
+ }
+ /**
+ * Function which initializes the processes for adding a wifi access point authentication
+ *
+ * @param {string} ssid SSID of network to configure
+ * @param {string} pwd Password of access point, plaintext to be masked
+ * @param {string} hash Password/SSID of access point, securely hashed
+ * @param {function} callback Function invoked after process is complete, or fails
+ */
+ setNetwork (ssid, pwd, hash, callback) {
+ let masked = pwd.split('').map(char => { return char !== '"' ? '*' : '"' }).join('')
+ _entry = `network={\n\tssid="${ssid}"\n\t#psk=${masked}\n\tpsk=${hash}\n}\n`
+ _cb = callback
+ _ssid = ssid
+ fs.readFile(filePath, 'utf8', this._readConfigCb.bind(this))
+ }
+ /**
+ * Executes command which gets the currently connected network
+ *
+ * @param {function} callback Function which is invoked after command is completed
+ */
getNetwork (callback) {
+ let output
exec(iwgetid, (err, stdout, stderr) => {
if (err) {
return callback(err)
}
- callback(null, stdout)
+ output = stdout.split('ESSID:')[1].replace(quoteRe, '').trim()
+ callback(null, output)
})
}
}
-module.exports = new wifi()
\ No newline at end of file
+module.exports = new Wifi()
\ No newline at end of file
diff --git a/nginx.conf b/nginx.conf
deleted file mode 100644
index cc71e29..0000000
--- a/nginx.conf
+++ /dev/null
@@ -1,48 +0,0 @@
-#blootstrap nginx conf
-
-#uncomment and modify following files for ssl
-#server {
-
- #listen 80;
- #server_name my_project;
- #return 301 https://$server_name$request_uri;
-
-#}
-
-server {
- listen 80;
- #listen 443 ssl;
-
- #ssl on;
- #ssl_certificate {{SSL_CERT_PATH}};
- #ssl_certificate_key {{SSL_KEY_PATH}};
-
- #ssl_session_timeout 5m;
- #ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2;
- #ssl_ciphers "HIGH:!aNULL:!MD5 or HIGH:!aNULL:!MD5:!3DES";
- #ssl_prefer_server_ciphers on;
-
- #server_name my_project;
-
- location / {
- proxy_pass http://127.0.0.1:6699/;
- proxy_set_header Host $host;
- proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
- proxy_set_header X-Real-IP $remote_addr;
- gzip on;
- gzip_comp_level 5;
- gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript application/json;
- }
- #uncomment for static file server
- #location /static/ {
- #uncomment to turn on caching
- #expires modified 1y;
- #access_log off;
- #add_header Cache-Control "public";
- #gzip on;
- #gzip_comp_level 5;
- #gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript application/json;
- #use project location
- #alias /var/node/intval3/static/;
- #}
-}
diff --git a/package-lock.json b/package-lock.json
index b93b75d..09cdb30 100644
--- a/package-lock.json
+++ b/package-lock.json
@@ -1,74 +1,517 @@
{
"name": "intval3",
- "version": "0.0.1",
+ "version": "3.0.1",
"lockfileVersion": 1,
"requires": true,
"dependencies": {
+ "abbrev": {
+ "version": "1.1.1",
+ "resolved": "https://registry.npmjs.org/abbrev/-/abbrev-1.1.1.tgz",
+ "integrity": "sha512-nne9/IiQ/hzIhY6pdDnbBtz7DjPTKrY00P/zvPSm5pOFkl6xuGrGnXn/VtTNNfNtAfZ9/1RtehkszU9qcTii0Q==",
+ "optional": true
+ },
+ "acorn": {
+ "version": "3.3.0",
+ "resolved": "https://registry.npmjs.org/acorn/-/acorn-3.3.0.tgz",
+ "integrity": "sha1-ReN/s56No/JbruP/U2niu18iAXo=",
+ "dev": true
+ },
+ "acorn-jsx": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/acorn-jsx/-/acorn-jsx-3.0.1.tgz",
+ "integrity": "sha1-r9+UiPsezvyDSPb7IvRk4ypYs2s=",
+ "dev": true,
+ "requires": {
+ "acorn": "3.3.0"
+ }
+ },
+ "ajv": {
+ "version": "4.11.8",
+ "resolved": "https://registry.npmjs.org/ajv/-/ajv-4.11.8.tgz",
+ "integrity": "sha1-gv+wKynmYq5TvcIK8VlHcGc5xTY=",
+ "optional": true,
+ "requires": {
+ "co": "4.6.0",
+ "json-stable-stringify": "1.0.1"
+ }
+ },
+ "amdefine": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/amdefine/-/amdefine-1.0.1.tgz",
+ "integrity": "sha1-SlKCrBZHKek2Gbz9OtFR+BfOkfU=",
+ "dev": true
+ },
+ "ansi-escape-sequences": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/ansi-escape-sequences/-/ansi-escape-sequences-3.0.0.tgz",
+ "integrity": "sha1-HBg5S2r5t2/5pjUJ+kl2af0s5T4=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4"
+ }
+ },
+ "ansi-regex": {
+ "version": "2.1.1",
+ "resolved": "https://registry.npmjs.org/ansi-regex/-/ansi-regex-2.1.1.tgz",
+ "integrity": "sha1-w7M6te42DYbg5ijwRorn7yfWVN8="
+ },
+ "anymatch": {
+ "version": "1.3.2",
+ "resolved": "https://registry.npmjs.org/anymatch/-/anymatch-1.3.2.tgz",
+ "integrity": "sha512-0XNayC8lTHQ2OI8aljNCN3sSx6hsr/1+rlcDAotXJR7C1oZZHCNsfpbKwMjRA3Uqb5tF1Rae2oloTr4xpq+WjA==",
+ "dev": true,
+ "requires": {
+ "micromatch": "2.3.11",
+ "normalize-path": "2.1.1"
+ }
+ },
+ "app-usage-stats": {
+ "version": "0.5.1",
+ "resolved": "https://registry.npmjs.org/app-usage-stats/-/app-usage-stats-0.5.1.tgz",
+ "integrity": "sha1-ZUfF25urCqX1ssVg6syK8g0KsTs=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "home-path": "1.0.5",
+ "test-value": "2.1.0",
+ "usage-stats": "0.9.4"
+ }
+ },
+ "aproba": {
+ "version": "1.2.0",
+ "resolved": "https://registry.npmjs.org/aproba/-/aproba-1.2.0.tgz",
+ "integrity": "sha512-Y9J6ZjXtoYh8RnXVCMOU/ttDmk1aBjunq9vO0ta5x85WDQiQfUF9sIPBITdbiiIVcBo03Hi3jMxigBtsddlXRw==",
+ "optional": true
+ },
+ "are-we-there-yet": {
+ "version": "1.1.4",
+ "resolved": "https://registry.npmjs.org/are-we-there-yet/-/are-we-there-yet-1.1.4.tgz",
+ "integrity": "sha1-u13KOCu5TwXhUZQ3PRb9O6HKEQ0=",
+ "optional": true,
+ "requires": {
+ "delegates": "1.0.0",
+ "readable-stream": "2.3.3"
+ }
+ },
+ "arr-diff": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/arr-diff/-/arr-diff-2.0.0.tgz",
+ "integrity": "sha1-jzuCf5Vai9ZpaX5KQlasPOrjVs8=",
+ "dev": true,
+ "requires": {
+ "arr-flatten": "1.1.0"
+ }
+ },
+ "arr-flatten": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/arr-flatten/-/arr-flatten-1.1.0.tgz",
+ "integrity": "sha512-L3hKV5R/p5o81R7O02IGnwpDmkp6E982XhtbuwSe3O4qOtMMMtodicASA1Cny2U+aCXcNpml+m4dPsvsJ3jatg==",
+ "dev": true
+ },
+ "arr-union": {
+ "version": "3.1.0",
+ "resolved": "https://registry.npmjs.org/arr-union/-/arr-union-3.1.0.tgz",
+ "integrity": "sha1-45sJrqne+Gao8gbiiK9jkZuuOcQ=",
+ "dev": true
+ },
+ "array-back": {
+ "version": "1.0.4",
+ "resolved": "https://registry.npmjs.org/array-back/-/array-back-1.0.4.tgz",
+ "integrity": "sha1-ZEun8JX3/898Q7Xw3DnTwfA8Bjs=",
+ "dev": true,
+ "requires": {
+ "typical": "2.6.1"
+ }
+ },
+ "array-unique": {
+ "version": "0.2.1",
+ "resolved": "https://registry.npmjs.org/array-unique/-/array-unique-0.2.1.tgz",
+ "integrity": "sha1-odl8yvy8JiXMcPrc6zalDFiwGlM=",
+ "dev": true
+ },
"asn1": {
- "version": "https://registry.npmjs.org/asn1/-/asn1-0.2.3.tgz",
+ "version": "0.2.3",
+ "resolved": "https://registry.npmjs.org/asn1/-/asn1-0.2.3.tgz",
"integrity": "sha1-2sh4dxPJlmhJ/IGAd36+nB3fO4Y="
},
"assert-plus": {
- "version": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz",
"integrity": "sha1-8S4PPF13sLHN2RRpQuTpbB5N1SU="
},
+ "assign-symbols": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/assign-symbols/-/assign-symbols-1.0.0.tgz",
+ "integrity": "sha1-WWZ/QfrdTyDMvCu5a41Pf3jsA2c=",
+ "dev": true
+ },
"async": {
"version": "1.0.0",
"resolved": "https://registry.npmjs.org/async/-/async-1.0.0.tgz",
"integrity": "sha1-+PwEyjoTeErenhZBr5hXjPvWR6k="
},
- "balanced-match": {
- "version": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.0.tgz",
- "integrity": "sha1-ibTRmasr7kneFk6gK4nORi1xt2c=",
+ "async-each": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/async-each/-/async-each-1.0.1.tgz",
+ "integrity": "sha1-GdOGodntxufByF04iu28xW0zYC0=",
+ "dev": true
+ },
+ "asynckit": {
+ "version": "0.4.0",
+ "resolved": "https://registry.npmjs.org/asynckit/-/asynckit-0.4.0.tgz",
+ "integrity": "sha1-x57Zf380y48robyXkLzDZkdLS3k=",
"optional": true
},
+ "atob": {
+ "version": "2.0.3",
+ "resolved": "https://registry.npmjs.org/atob/-/atob-2.0.3.tgz",
+ "integrity": "sha1-GcenYEc3dEaPILLS0DNyrX1Mv10=",
+ "dev": true
+ },
+ "aws-sign2": {
+ "version": "0.6.0",
+ "resolved": "https://registry.npmjs.org/aws-sign2/-/aws-sign2-0.6.0.tgz",
+ "integrity": "sha1-FDQt0428yU0OW4fXY81jYSwOeU8=",
+ "optional": true
+ },
+ "aws4": {
+ "version": "1.6.0",
+ "resolved": "https://registry.npmjs.org/aws4/-/aws4-1.6.0.tgz",
+ "integrity": "sha1-g+9cqGCysy5KDe7e6MdxudtXRx4=",
+ "optional": true
+ },
+ "balanced-match": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.0.tgz",
+ "integrity": "sha1-ibTRmasr7kneFk6gK4nORi1xt2c="
+ },
+ "base": {
+ "version": "0.11.2",
+ "resolved": "https://registry.npmjs.org/base/-/base-0.11.2.tgz",
+ "integrity": "sha512-5T6P4xPgpp0YDFvSWwEZ4NoE3aM4QBQXDzmVbraCkFj8zHM+mba8SyqB5DbZWyR7mYHo6Y7BdQo3MoA4m0TeQg==",
+ "dev": true,
+ "requires": {
+ "cache-base": "1.0.1",
+ "class-utils": "0.3.6",
+ "component-emitter": "1.2.1",
+ "define-property": "1.0.0",
+ "isobject": "3.0.1",
+ "mixin-deep": "1.3.1",
+ "pascalcase": "0.1.1"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
"bcrypt-pbkdf": {
- "version": "https://registry.npmjs.org/bcrypt-pbkdf/-/bcrypt-pbkdf-1.0.1.tgz",
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/bcrypt-pbkdf/-/bcrypt-pbkdf-1.0.1.tgz",
"integrity": "sha1-Y7xdy2EzG5K8Bf1SiVPDNGKgb40=",
"optional": true,
"requires": {
- "tweetnacl": "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.14.5.tgz"
+ "tweetnacl": "0.14.5"
}
},
+ "binary-extensions": {
+ "version": "1.11.0",
+ "resolved": "https://registry.npmjs.org/binary-extensions/-/binary-extensions-1.11.0.tgz",
+ "integrity": "sha1-RqoXUftqL5PuXmibsQh9SxTGwgU=",
+ "dev": true
+ },
+ "bindings": {
+ "version": "1.2.1",
+ "resolved": "https://registry.npmjs.org/bindings/-/bindings-1.2.1.tgz",
+ "integrity": "sha1-FK1hE4EtLTfXLme0ystLtyZQXxE="
+ },
"bleno": {
- "version": "https://registry.npmjs.org/bleno/-/bleno-0.4.2.tgz",
+ "version": "0.4.2",
+ "resolved": "https://registry.npmjs.org/bleno/-/bleno-0.4.2.tgz",
"integrity": "sha1-IesK10O850eU45L0ph4TsHOT26o=",
"requires": {
- "bplist-parser": "https://registry.npmjs.org/bplist-parser/-/bplist-parser-0.0.6.tgz",
- "debug": "https://registry.npmjs.org/debug/-/debug-2.6.8.tgz",
- "xpc-connection": "https://registry.npmjs.org/xpc-connection/-/xpc-connection-0.1.4.tgz"
+ "bluetooth-hci-socket": "0.5.1",
+ "bplist-parser": "0.0.6",
+ "debug": "2.6.8",
+ "xpc-connection": "0.1.4"
+ }
+ },
+ "block-stream": {
+ "version": "0.0.9",
+ "resolved": "https://registry.npmjs.org/block-stream/-/block-stream-0.0.9.tgz",
+ "integrity": "sha1-E+v+d4oDIFz+A3UUgeu0szAMEmo=",
+ "requires": {
+ "inherits": "2.0.3"
+ }
+ },
+ "bluebird": {
+ "version": "3.4.7",
+ "resolved": "https://registry.npmjs.org/bluebird/-/bluebird-3.4.7.tgz",
+ "integrity": "sha1-9y12C+Cbf3bQjtj66Ysomo0F+rM=",
+ "dev": true
+ },
+ "bluetooth-hci-socket": {
+ "version": "0.5.1",
+ "resolved": "https://registry.npmjs.org/bluetooth-hci-socket/-/bluetooth-hci-socket-0.5.1.tgz",
+ "integrity": "sha1-774hUk/Bz10/rl1RNl1WHUq77Qs=",
+ "optional": true,
+ "requires": {
+ "debug": "2.6.8",
+ "nan": "2.6.2",
+ "usb": "1.3.1"
+ }
+ },
+ "boom": {
+ "version": "2.10.1",
+ "resolved": "https://registry.npmjs.org/boom/-/boom-2.10.1.tgz",
+ "integrity": "sha1-OciRjO/1eZ+D+UkqhI9iWt0Mdm8=",
+ "requires": {
+ "hoek": "2.16.3"
}
},
"bplist-parser": {
- "version": "https://registry.npmjs.org/bplist-parser/-/bplist-parser-0.0.6.tgz",
+ "version": "0.0.6",
+ "resolved": "https://registry.npmjs.org/bplist-parser/-/bplist-parser-0.0.6.tgz",
"integrity": "sha1-ONo0cYF9+dRKs4kuJ3B7u9daEbk=",
"optional": true
},
"brace-expansion": {
- "version": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.8.tgz",
+ "version": "1.1.8",
+ "resolved": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.8.tgz",
"integrity": "sha1-wHshHHyVLsH479Uad+8NHTmQopI=",
- "optional": true,
"requires": {
- "balanced-match": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.0.tgz",
- "concat-map": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz"
+ "balanced-match": "1.0.0",
+ "concat-map": "0.0.1"
+ }
+ },
+ "braces": {
+ "version": "1.8.5",
+ "resolved": "https://registry.npmjs.org/braces/-/braces-1.8.5.tgz",
+ "integrity": "sha1-uneWLhLf+WnWt2cR6RS3N4V79qc=",
+ "dev": true,
+ "requires": {
+ "expand-range": "1.8.2",
+ "preserve": "0.2.0",
+ "repeat-element": "1.1.2"
}
},
"bunyan": {
- "version": "https://registry.npmjs.org/bunyan/-/bunyan-1.8.12.tgz",
+ "version": "1.8.12",
+ "resolved": "https://registry.npmjs.org/bunyan/-/bunyan-1.8.12.tgz",
"integrity": "sha1-8VDw9nSKvdcq6uhPBEA74u8RN5c=",
"requires": {
- "dtrace-provider": "https://registry.npmjs.org/dtrace-provider/-/dtrace-provider-0.8.5.tgz",
- "moment": "https://registry.npmjs.org/moment/-/moment-2.18.1.tgz",
- "mv": "https://registry.npmjs.org/mv/-/mv-2.1.1.tgz",
- "safe-json-stringify": "https://registry.npmjs.org/safe-json-stringify/-/safe-json-stringify-1.0.4.tgz"
+ "dtrace-provider": "0.8.5",
+ "moment": "2.18.1",
+ "mv": "2.1.1",
+ "safe-json-stringify": "1.0.4"
+ }
+ },
+ "cache-base": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/cache-base/-/cache-base-1.0.1.tgz",
+ "integrity": "sha512-AKcdTnFSWATd5/GCPRxr2ChwIJ85CeyrEyjRHlKxQ56d4XJMGym0uAiKn0xbLOGOl3+yRpOTi484dVCEc5AUzQ==",
+ "dev": true,
+ "requires": {
+ "collection-visit": "1.0.0",
+ "component-emitter": "1.2.1",
+ "get-value": "2.0.6",
+ "has-value": "1.0.0",
+ "isobject": "3.0.1",
+ "set-value": "2.0.0",
+ "to-object-path": "0.3.0",
+ "union-value": "1.0.0",
+ "unset-value": "1.0.0"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
+ "cache-point": {
+ "version": "0.4.1",
+ "resolved": "https://registry.npmjs.org/cache-point/-/cache-point-0.4.1.tgz",
+ "integrity": "sha512-4TgWfe9SF+bUy5cCql8gWHqKNrviufNwSYxLjf2utB0pY4+bdcuFwMmY1hDB+67Gz/L1vmhFNhePAjJTFBtV+Q==",
+ "dev": true,
+ "requires": {
+ "array-back": "2.0.0",
+ "fs-then-native": "2.0.0",
+ "mkdirp2": "1.0.3"
+ },
+ "dependencies": {
+ "array-back": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/array-back/-/array-back-2.0.0.tgz",
+ "integrity": "sha512-eJv4pLLufP3g5kcZry0j6WXpIbzYw9GUB4mVJZno9wfwiBxbizTnHCw3VJb07cBihbFX48Y7oSrW9y+gt4glyw==",
+ "dev": true,
+ "requires": {
+ "typical": "2.6.1"
+ }
+ }
+ }
+ },
+ "caseless": {
+ "version": "0.12.0",
+ "resolved": "https://registry.npmjs.org/caseless/-/caseless-0.12.0.tgz",
+ "integrity": "sha1-G2gcIf+EAzyCZUMJBolCDRhxUdw=",
+ "optional": true
+ },
+ "catharsis": {
+ "version": "0.8.9",
+ "resolved": "https://registry.npmjs.org/catharsis/-/catharsis-0.8.9.tgz",
+ "integrity": "sha1-mMyJDKZS3S7w5ws3klMQ/56Q/Is=",
+ "dev": true,
+ "requires": {
+ "underscore-contrib": "0.3.0"
+ }
+ },
+ "chokidar": {
+ "version": "1.7.0",
+ "resolved": "https://registry.npmjs.org/chokidar/-/chokidar-1.7.0.tgz",
+ "integrity": "sha1-eY5ol3gVHIB2tLNg5e3SjNortGg=",
+ "dev": true,
+ "requires": {
+ "anymatch": "1.3.2",
+ "async-each": "1.0.1",
+ "fsevents": "1.1.3",
+ "glob-parent": "2.0.0",
+ "inherits": "2.0.3",
+ "is-binary-path": "1.0.1",
+ "is-glob": "2.0.1",
+ "path-is-absolute": "1.0.1",
+ "readdirp": "2.1.0"
+ }
+ },
+ "class-utils": {
+ "version": "0.3.6",
+ "resolved": "https://registry.npmjs.org/class-utils/-/class-utils-0.3.6.tgz",
+ "integrity": "sha512-qOhPa/Fj7s6TY8H8esGu5QNpMMQxz79h+urzrNYN6mn+9BnxlDGf5QZ+XeCDsxSjPqsSR56XOZOJmpeurnLMeg==",
+ "dev": true,
+ "requires": {
+ "arr-union": "3.1.0",
+ "define-property": "0.2.5",
+ "isobject": "3.0.1",
+ "static-extend": "0.1.2"
+ },
+ "dependencies": {
+ "define-property": {
+ "version": "0.2.5",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-0.2.5.tgz",
+ "integrity": "sha1-w1se+RjsPJkPmlvFe+BKrOxcgRY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "0.1.6"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-0.1.6.tgz",
+ "integrity": "sha1-qeEss66Nh2cn7u84Q/igiXtcmNY=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-data-descriptor": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-0.1.4.tgz",
+ "integrity": "sha1-C17mSDiOLIYCgueT8YVv7D8wG1Y=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-0.1.6.tgz",
+ "integrity": "sha512-avDYr0SB3DwO9zsMov0gKCESFYqCnE4hq/4z3TdUlukEy5t9C0YRq7HLrsN52NAcqXKaepeCD0n+B0arnVG3Hg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "0.1.6",
+ "is-data-descriptor": "0.1.4",
+ "kind-of": "5.1.0"
+ }
+ },
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ },
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ }
}
},
"clone-regexp": {
- "version": "https://registry.npmjs.org/clone-regexp/-/clone-regexp-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/clone-regexp/-/clone-regexp-1.0.0.tgz",
"integrity": "sha1-6uCiQT9VwJQvgYwin+/OhF1/Oxw=",
"requires": {
- "is-regexp": "https://registry.npmjs.org/is-regexp/-/is-regexp-1.0.0.tgz",
- "is-supported-regexp-flag": "https://registry.npmjs.org/is-supported-regexp-flag/-/is-supported-regexp-flag-1.0.0.tgz"
+ "is-regexp": "1.0.0",
+ "is-supported-regexp-flag": "1.0.0"
+ }
+ },
+ "co": {
+ "version": "4.6.0",
+ "resolved": "https://registry.npmjs.org/co/-/co-4.6.0.tgz",
+ "integrity": "sha1-bqa989hTrlTMuOR7+gvz+QMfsYQ=",
+ "optional": true
+ },
+ "code-point-at": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/code-point-at/-/code-point-at-1.1.0.tgz",
+ "integrity": "sha1-DQcLTQQ6W+ozovGkDi7bPZpMz3c="
+ },
+ "collect-all": {
+ "version": "1.0.3",
+ "resolved": "https://registry.npmjs.org/collect-all/-/collect-all-1.0.3.tgz",
+ "integrity": "sha512-0y0rBgoX8IzIjBAUnO73SEtSb4Mhk3IoceWJq5zZSxb9mWORhWH8xLYo4EDSOE1jRBk1LhmfjqWFFt10h/+MEA==",
+ "dev": true,
+ "requires": {
+ "stream-connect": "1.0.2",
+ "stream-via": "1.0.4"
+ }
+ },
+ "collection-visit": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/collection-visit/-/collection-visit-1.0.0.tgz",
+ "integrity": "sha1-S8A3PBZLwykbTTaMgpzxqApZ3KA=",
+ "dev": true,
+ "requires": {
+ "map-visit": "1.0.0",
+ "object-visit": "1.0.1"
}
},
"colors": {
@@ -76,13 +519,127 @@
"resolved": "https://registry.npmjs.org/colors/-/colors-1.0.3.tgz",
"integrity": "sha1-BDP0TYCWgP3rYO0mDxsMJi6CpAs="
},
+ "combined-stream": {
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/combined-stream/-/combined-stream-1.0.5.tgz",
+ "integrity": "sha1-k4NwpXtKUd6ix3wV1cX9+JUWQAk=",
+ "requires": {
+ "delayed-stream": "1.0.0"
+ }
+ },
+ "command-line-args": {
+ "version": "4.0.7",
+ "resolved": "https://registry.npmjs.org/command-line-args/-/command-line-args-4.0.7.tgz",
+ "integrity": "sha512-aUdPvQRAyBvQd2n7jXcsMDz68ckBJELXNzBybCHOibUWEg0mWTnaYCSRU8h9R+aNRSvDihJtssSRCiDRpLaezA==",
+ "dev": true,
+ "requires": {
+ "array-back": "2.0.0",
+ "find-replace": "1.0.3",
+ "typical": "2.6.1"
+ },
+ "dependencies": {
+ "array-back": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/array-back/-/array-back-2.0.0.tgz",
+ "integrity": "sha512-eJv4pLLufP3g5kcZry0j6WXpIbzYw9GUB4mVJZno9wfwiBxbizTnHCw3VJb07cBihbFX48Y7oSrW9y+gt4glyw==",
+ "dev": true,
+ "requires": {
+ "typical": "2.6.1"
+ }
+ }
+ }
+ },
+ "command-line-tool": {
+ "version": "0.7.0",
+ "resolved": "https://registry.npmjs.org/command-line-tool/-/command-line-tool-0.7.0.tgz",
+ "integrity": "sha1-yoB5KuIGnPfKpWLAy8LNEYERIqA=",
+ "dev": true,
+ "requires": {
+ "ansi-escape-sequences": "3.0.0",
+ "array-back": "1.0.4",
+ "command-line-args": "4.0.7",
+ "command-line-usage": "4.0.1",
+ "typical": "2.6.1"
+ }
+ },
+ "command-line-usage": {
+ "version": "4.0.1",
+ "resolved": "https://registry.npmjs.org/command-line-usage/-/command-line-usage-4.0.1.tgz",
+ "integrity": "sha512-IqYzZuXizukrdhnbdUj2hh4iceycow+Jn10mER4lwU4IapYvl5ZzoRPsj5Yraew5oRk4yfFKMuULGvAfb5o29w==",
+ "dev": true,
+ "requires": {
+ "ansi-escape-sequences": "4.0.0",
+ "array-back": "2.0.0",
+ "table-layout": "0.4.2",
+ "typical": "2.6.1"
+ },
+ "dependencies": {
+ "ansi-escape-sequences": {
+ "version": "4.0.0",
+ "resolved": "https://registry.npmjs.org/ansi-escape-sequences/-/ansi-escape-sequences-4.0.0.tgz",
+ "integrity": "sha512-v+0wW9Wezwsyb0uF4aBVCjmSqit3Ru7PZFziGF0o2KwTvN2zWfTi3BRLq9EkJFdg3eBbyERXGTntVpBxH1J68Q==",
+ "dev": true,
+ "requires": {
+ "array-back": "2.0.0"
+ }
+ },
+ "array-back": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/array-back/-/array-back-2.0.0.tgz",
+ "integrity": "sha512-eJv4pLLufP3g5kcZry0j6WXpIbzYw9GUB4mVJZno9wfwiBxbizTnHCw3VJb07cBihbFX48Y7oSrW9y+gt4glyw==",
+ "dev": true,
+ "requires": {
+ "typical": "2.6.1"
+ }
+ }
+ }
+ },
+ "commander": {
+ "version": "2.12.2",
+ "resolved": "https://registry.npmjs.org/commander/-/commander-2.12.2.tgz",
+ "integrity": "sha512-BFnaq5ZOGcDN7FlrtBT4xxkgIToalIIxwjxLWVJ8bGTpe1LroqMiqQXdA7ygc7CRvaYS+9zfPGFnJqFSayx+AA==",
+ "dev": true
+ },
+ "common-sequence": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/common-sequence/-/common-sequence-1.0.2.tgz",
+ "integrity": "sha1-MOB/P49vf5s97oVPILLTnu4Ibeg=",
+ "dev": true
+ },
+ "component-emitter": {
+ "version": "1.2.1",
+ "resolved": "https://registry.npmjs.org/component-emitter/-/component-emitter-1.2.1.tgz",
+ "integrity": "sha1-E3kY1teCg/ffemt8WmPhQOaUJeY=",
+ "dev": true
+ },
"concat-map": {
- "version": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz",
- "integrity": "sha1-2Klr13/Wjfd5OnMDajug1UBdR3s=",
- "optional": true
+ "version": "0.0.1",
+ "resolved": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz",
+ "integrity": "sha1-2Klr13/Wjfd5OnMDajug1UBdR3s="
+ },
+ "config-master": {
+ "version": "3.1.0",
+ "resolved": "https://registry.npmjs.org/config-master/-/config-master-3.1.0.tgz",
+ "integrity": "sha1-ZnZjWQUFooO/JqSE1oSJ10xUhdo=",
+ "dev": true,
+ "requires": {
+ "walk-back": "2.0.1"
+ }
+ },
+ "console-control-strings": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/console-control-strings/-/console-control-strings-1.1.0.tgz",
+ "integrity": "sha1-PXz0Rk22RG6mRL9LOVB/mFEAjo4="
+ },
+ "copy-descriptor": {
+ "version": "0.1.1",
+ "resolved": "https://registry.npmjs.org/copy-descriptor/-/copy-descriptor-0.1.1.tgz",
+ "integrity": "sha1-Z29us8OZl8LuGsOpJP1hJHSPV40=",
+ "dev": true
},
"core-util-is": {
- "version": "https://registry.npmjs.org/core-util-is/-/core-util-is-1.0.2.tgz",
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/core-util-is/-/core-util-is-1.0.2.tgz",
"integrity": "sha1-tf1UIgqivFq1eqtxQMlAdUUDwac="
},
"cron": {
@@ -93,29 +650,41 @@
"moment-timezone": "0.5.13"
}
},
+ "cryptiles": {
+ "version": "2.0.5",
+ "resolved": "https://registry.npmjs.org/cryptiles/-/cryptiles-2.0.5.tgz",
+ "integrity": "sha1-O9/s3GCBR8HGcgL6KR59ylnqo7g=",
+ "requires": {
+ "boom": "2.10.1"
+ }
+ },
"csv": {
- "version": "https://registry.npmjs.org/csv/-/csv-1.1.1.tgz",
+ "version": "1.1.1",
+ "resolved": "https://registry.npmjs.org/csv/-/csv-1.1.1.tgz",
"integrity": "sha1-2ZUtWbH5ZKevvN2ATWgYpzGZpHc=",
"requires": {
- "csv-generate": "https://registry.npmjs.org/csv-generate/-/csv-generate-1.0.0.tgz",
- "csv-parse": "https://registry.npmjs.org/csv-parse/-/csv-parse-1.2.1.tgz",
- "csv-stringify": "https://registry.npmjs.org/csv-stringify/-/csv-stringify-1.0.4.tgz",
- "stream-transform": "https://registry.npmjs.org/stream-transform/-/stream-transform-0.1.2.tgz"
+ "csv-generate": "1.0.0",
+ "csv-parse": "1.2.1",
+ "csv-stringify": "1.0.4",
+ "stream-transform": "0.1.2"
}
},
"csv-generate": {
- "version": "https://registry.npmjs.org/csv-generate/-/csv-generate-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/csv-generate/-/csv-generate-1.0.0.tgz",
"integrity": "sha1-vVKIaFnQySXz5R9g86vtJi+hXK8="
},
"csv-parse": {
- "version": "https://registry.npmjs.org/csv-parse/-/csv-parse-1.2.1.tgz",
+ "version": "1.2.1",
+ "resolved": "https://registry.npmjs.org/csv-parse/-/csv-parse-1.2.1.tgz",
"integrity": "sha1-kZnCPySQ2YxNmrKgFnsGknSYyd8="
},
"csv-stringify": {
- "version": "https://registry.npmjs.org/csv-stringify/-/csv-stringify-1.0.4.tgz",
+ "version": "1.0.4",
+ "resolved": "https://registry.npmjs.org/csv-stringify/-/csv-stringify-1.0.4.tgz",
"integrity": "sha1-vBi6ua1M7zGV/SV5gLWLR5xC0+U=",
"requires": {
- "lodash.get": "https://registry.npmjs.org/lodash.get/-/lodash.get-4.4.2.tgz"
+ "lodash.get": "4.4.2"
}
},
"cycle": {
@@ -124,53 +693,228 @@
"integrity": "sha1-IegLK+hYD5i0aPN5QwZisEbDStI="
},
"dashdash": {
- "version": "https://registry.npmjs.org/dashdash/-/dashdash-1.14.1.tgz",
+ "version": "1.14.1",
+ "resolved": "https://registry.npmjs.org/dashdash/-/dashdash-1.14.1.tgz",
"integrity": "sha1-hTz6D3y+L+1d4gMmuN1YEDX24vA=",
"requires": {
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz"
+ "assert-plus": "1.0.0"
}
},
"debug": {
- "version": "https://registry.npmjs.org/debug/-/debug-2.6.8.tgz",
+ "version": "2.6.8",
+ "resolved": "https://registry.npmjs.org/debug/-/debug-2.6.8.tgz",
"integrity": "sha1-5zFTHKLt4n0YgiJCfaF4IdaP9Pw=",
"requires": {
- "ms": "https://registry.npmjs.org/ms/-/ms-2.0.0.tgz"
+ "ms": "2.0.0"
}
},
+ "decode-uri-component": {
+ "version": "0.2.0",
+ "resolved": "https://registry.npmjs.org/decode-uri-component/-/decode-uri-component-0.2.0.tgz",
+ "integrity": "sha1-6zkTMzRYd1y4TNGh+uBiEGu4dUU=",
+ "dev": true
+ },
+ "deep-extend": {
+ "version": "0.5.0",
+ "resolved": "https://registry.npmjs.org/deep-extend/-/deep-extend-0.5.0.tgz",
+ "integrity": "sha1-bvSgmwX5iw41jW2T1Mo8rsZnKAM=",
+ "dev": true
+ },
+ "defer-promise": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/defer-promise/-/defer-promise-1.0.1.tgz",
+ "integrity": "sha1-HKb/7dvO8XFd16riXHYW+a4iky8=",
+ "dev": true
+ },
+ "define-property": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-1.0.0.tgz",
+ "integrity": "sha1-dp66rz9KY6rTr56NMEybvnm/sOY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "1.0.2"
+ }
+ },
+ "delayed-stream": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/delayed-stream/-/delayed-stream-1.0.0.tgz",
+ "integrity": "sha1-3zrhmayt+31ECqrgsp4icrJOxhk="
+ },
+ "delegates": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/delegates/-/delegates-1.0.0.tgz",
+ "integrity": "sha1-hMbhWbgZBP3KWaDvRM2HDTElD5o=",
+ "optional": true
+ },
+ "detect-file": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/detect-file/-/detect-file-1.0.0.tgz",
+ "integrity": "sha1-8NZtA2cqglyxtzvbP+YjEMjlUrc=",
+ "dev": true
+ },
+ "detect-libc": {
+ "version": "1.0.3",
+ "resolved": "https://registry.npmjs.org/detect-libc/-/detect-libc-1.0.3.tgz",
+ "integrity": "sha1-+hN8S9aY7fVc1c0CrFWfkaTEups=",
+ "optional": true
+ },
"detect-node": {
- "version": "https://registry.npmjs.org/detect-node/-/detect-node-2.0.3.tgz",
+ "version": "2.0.3",
+ "resolved": "https://registry.npmjs.org/detect-node/-/detect-node-2.0.3.tgz",
"integrity": "sha1-ogM8CcyOFY03dI+951B4Mr1s4Sc="
},
+ "dmd": {
+ "version": "3.0.6",
+ "resolved": "https://registry.npmjs.org/dmd/-/dmd-3.0.6.tgz",
+ "integrity": "sha1-lMDg+4jRy2uCg3WVBT3nkZx1PCU=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "cache-point": "0.4.1",
+ "common-sequence": "1.0.2",
+ "file-set": "1.1.1",
+ "handlebars": "3.0.3",
+ "marked": "0.3.6",
+ "object-get": "2.1.0",
+ "reduce-flatten": "1.0.1",
+ "reduce-unique": "1.0.0",
+ "reduce-without": "1.0.1",
+ "test-value": "2.1.0",
+ "walk-back": "3.0.0"
+ },
+ "dependencies": {
+ "walk-back": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/walk-back/-/walk-back-3.0.0.tgz",
+ "integrity": "sha1-I1h4ejXakQMtrV6S+AsSNw2HlcU=",
+ "dev": true
+ }
+ }
+ },
"dtrace-provider": {
- "version": "https://registry.npmjs.org/dtrace-provider/-/dtrace-provider-0.8.5.tgz",
+ "version": "0.8.5",
+ "resolved": "https://registry.npmjs.org/dtrace-provider/-/dtrace-provider-0.8.5.tgz",
"integrity": "sha1-mOu6Ihr6xG4cOf02hY2Pk2dSS5I=",
"optional": true,
"requires": {
- "nan": "https://registry.npmjs.org/nan/-/nan-2.6.2.tgz"
+ "nan": "2.6.2"
}
},
"easy-stack": {
- "version": "https://registry.npmjs.org/easy-stack/-/easy-stack-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/easy-stack/-/easy-stack-1.0.0.tgz",
"integrity": "sha1-EskbMIWjfwuqM26UhurEv5Tj54g="
},
"ecc-jsbn": {
- "version": "https://registry.npmjs.org/ecc-jsbn/-/ecc-jsbn-0.1.1.tgz",
+ "version": "0.1.1",
+ "resolved": "https://registry.npmjs.org/ecc-jsbn/-/ecc-jsbn-0.1.1.tgz",
"integrity": "sha1-D8c6ntXw1Tw4GTOYUj735UN3dQU=",
"optional": true,
"requires": {
- "jsbn": "https://registry.npmjs.org/jsbn/-/jsbn-0.1.1.tgz"
+ "jsbn": "0.1.1"
+ }
+ },
+ "ensure-posix-path": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/ensure-posix-path/-/ensure-posix-path-1.0.2.tgz",
+ "integrity": "sha1-pls+QtC3HPxYXrd0+ZQ8jZuRsMI=",
+ "dev": true
+ },
+ "epoll": {
+ "version": "0.1.22",
+ "resolved": "https://registry.npmjs.org/epoll/-/epoll-0.1.22.tgz",
+ "integrity": "sha1-GrmmN8/xGiCXDIiLHKIXi2TPUpE=",
+ "requires": {
+ "bindings": "1.2.1",
+ "nan": "2.6.2"
}
},
"escape-regexp-component": {
- "version": "https://registry.npmjs.org/escape-regexp-component/-/escape-regexp-component-1.0.2.tgz",
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/escape-regexp-component/-/escape-regexp-component-1.0.2.tgz",
"integrity": "sha1-nGO20LJf8qiMOtvRjFthrMO5+qI="
},
+ "escape-string-regexp": {
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-1.0.5.tgz",
+ "integrity": "sha1-G2HAViGQqN/2rjuyzwIAyhMLhtQ=",
+ "dev": true
+ },
+ "espree": {
+ "version": "3.1.7",
+ "resolved": "https://registry.npmjs.org/espree/-/espree-3.1.7.tgz",
+ "integrity": "sha1-/V3ux2qXpRIKnNOnyxF3oJI7EdI=",
+ "dev": true,
+ "requires": {
+ "acorn": "3.3.0",
+ "acorn-jsx": "3.0.1"
+ }
+ },
"event-pubsub": {
- "version": "https://registry.npmjs.org/event-pubsub/-/event-pubsub-4.2.4.tgz",
- "integrity": "sha1-Y0+2l/5AFNxQBHIthZQyuqISMlc="
+ "version": "4.3.0",
+ "resolved": "https://registry.npmjs.org/event-pubsub/-/event-pubsub-4.3.0.tgz",
+ "integrity": "sha512-z7IyloorXvKbFx9Bpie2+vMJKKx1fH1EN5yiTfp8CiLOTptSYy1g8H4yDpGlEdshL1PBiFtBHepF2cNsqeEeFQ=="
+ },
+ "exists-stat": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/exists-stat/-/exists-stat-1.0.0.tgz",
+ "integrity": "sha1-BmDjUlouidnkRhKUQMJy7foktSk=",
+ "dev": true
+ },
+ "expand-brackets": {
+ "version": "0.1.5",
+ "resolved": "https://registry.npmjs.org/expand-brackets/-/expand-brackets-0.1.5.tgz",
+ "integrity": "sha1-3wcoTjQqgHzXM6xa9yQR5YHRF3s=",
+ "dev": true,
+ "requires": {
+ "is-posix-bracket": "0.1.1"
+ }
+ },
+ "expand-range": {
+ "version": "1.8.2",
+ "resolved": "https://registry.npmjs.org/expand-range/-/expand-range-1.8.2.tgz",
+ "integrity": "sha1-opnv/TNf4nIeuujiV+x5ZE/IUzc=",
+ "dev": true,
+ "requires": {
+ "fill-range": "2.2.3"
+ }
+ },
+ "expand-tilde": {
+ "version": "2.0.2",
+ "resolved": "https://registry.npmjs.org/expand-tilde/-/expand-tilde-2.0.2.tgz",
+ "integrity": "sha1-l+gBqgUt8CRU3kawK/YhZCzchQI=",
+ "dev": true,
+ "requires": {
+ "homedir-polyfill": "1.0.1"
+ }
+ },
+ "extend": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/extend/-/extend-3.0.1.tgz",
+ "integrity": "sha1-p1Xqe8Gt/MWjHOfnYtuq3F5jZEQ=",
+ "optional": true
+ },
+ "extend-shallow": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/extend-shallow/-/extend-shallow-2.0.1.tgz",
+ "integrity": "sha1-Ua99YUrZqfYQ6huvu5idaxxWiQ8=",
+ "dev": true,
+ "requires": {
+ "is-extendable": "0.1.1"
+ }
+ },
+ "extglob": {
+ "version": "0.3.2",
+ "resolved": "https://registry.npmjs.org/extglob/-/extglob-0.3.2.tgz",
+ "integrity": "sha1-Lhj/PS9JqydlzskCPwEdqo2DSaE=",
+ "dev": true,
+ "requires": {
+ "is-extglob": "1.0.0"
+ }
},
"extsprintf": {
- "version": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.3.0.tgz",
+ "version": "1.3.0",
+ "resolved": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.3.0.tgz",
"integrity": "sha1-lpGEQOMEGnpBT4xS48V06zw+HgU="
},
"eyes": {
@@ -178,173 +922,2129 @@
"resolved": "https://registry.npmjs.org/eyes/-/eyes-0.1.8.tgz",
"integrity": "sha1-Ys8SAjTGg3hdkCNIqADvPgzCC8A="
},
- "formidable": {
- "version": "https://registry.npmjs.org/formidable/-/formidable-1.1.1.tgz",
- "integrity": "sha1-lriIb3w8NQi5Mta9cMTTqI818ak="
- },
- "getpass": {
- "version": "https://registry.npmjs.org/getpass/-/getpass-0.1.7.tgz",
- "integrity": "sha1-Xv+OPmhNVprkyysSgmBOi6YhSfo=",
+ "file-set": {
+ "version": "1.1.1",
+ "resolved": "https://registry.npmjs.org/file-set/-/file-set-1.1.1.tgz",
+ "integrity": "sha1-0+xwwIDsjxjyBLod4QZ4DJBWkms=",
+ "dev": true,
"requires": {
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz"
- }
- },
- "glob": {
- "version": "https://registry.npmjs.org/glob/-/glob-6.0.4.tgz",
- "integrity": "sha1-DwiGD2oVUSey+t1PnOJLGqtuTSI=",
- "optional": true,
- "requires": {
- "inflight": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz",
- "inherits": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz",
- "minimatch": "https://registry.npmjs.org/minimatch/-/minimatch-3.0.4.tgz",
- "once": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
- "path-is-absolute": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz"
- }
- },
- "gpio": {
- "version": "https://registry.npmjs.org/gpio/-/gpio-0.2.7.tgz",
- "integrity": "sha1-vzhsiJYe/QpPag/3FnrA/zmX6rk="
- },
- "handle-thing": {
- "version": "https://registry.npmjs.org/handle-thing/-/handle-thing-1.2.5.tgz",
- "integrity": "sha1-/Xqtcmvxpf0W38KbL3pmAdJxOcQ="
- },
- "hpack.js": {
- "version": "https://registry.npmjs.org/hpack.js/-/hpack.js-2.1.6.tgz",
- "integrity": "sha1-h3dMCUnlE/QuhFdbPEVoH63ioLI=",
- "requires": {
- "inherits": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz",
- "obuf": "https://registry.npmjs.org/obuf/-/obuf-1.1.1.tgz",
- "readable-stream": "https://registry.npmjs.org/readable-stream/-/readable-stream-2.3.3.tgz",
- "wbuf": "https://registry.npmjs.org/wbuf/-/wbuf-1.7.2.tgz"
- }
- },
- "http-deceiver": {
- "version": "https://registry.npmjs.org/http-deceiver/-/http-deceiver-1.2.7.tgz",
- "integrity": "sha1-+nFolEq5pRnTN8sL7HKE3D5yPYc="
- },
- "http-signature": {
- "version": "https://registry.npmjs.org/http-signature/-/http-signature-1.1.1.tgz",
- "integrity": "sha1-33LiZwZs0Kxn+3at+OE0qPvPkb8=",
- "requires": {
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-0.2.0.tgz",
- "jsprim": "https://registry.npmjs.org/jsprim/-/jsprim-1.4.1.tgz",
- "sshpk": "https://registry.npmjs.org/sshpk/-/sshpk-1.13.1.tgz"
+ "array-back": "1.0.4",
+ "glob": "7.1.2"
},
"dependencies": {
- "assert-plus": {
- "version": "https://registry.npmjs.org/assert-plus/-/assert-plus-0.2.0.tgz",
- "integrity": "sha1-104bh+ev/A24qttwIfP+SBAasjQ="
+ "glob": {
+ "version": "7.1.2",
+ "resolved": "https://registry.npmjs.org/glob/-/glob-7.1.2.tgz",
+ "integrity": "sha512-MJTUg1kjuLeQCJ+ccE4Vpa6kKVXkPYJ2mOCQyUuKLcLQsdrMCpBPUi8qVE6+YuaJkozeA9NusTAw3hLr8Xe5EQ==",
+ "dev": true,
+ "requires": {
+ "fs.realpath": "1.0.0",
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
}
}
},
- "inflight": {
- "version": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz",
- "integrity": "sha1-Sb1jMdfQLQwJvJEKEHW6gWW1bfk=",
+ "filename-regex": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/filename-regex/-/filename-regex-2.0.1.tgz",
+ "integrity": "sha1-wcS5vuPglyXdsQa3XB4wH+LxiyY=",
+ "dev": true
+ },
+ "fill-range": {
+ "version": "2.2.3",
+ "resolved": "https://registry.npmjs.org/fill-range/-/fill-range-2.2.3.tgz",
+ "integrity": "sha1-ULd9/X5Gm8dJJHCWNpn+eoSFpyM=",
+ "dev": true,
+ "requires": {
+ "is-number": "2.1.0",
+ "isobject": "2.1.0",
+ "randomatic": "1.1.7",
+ "repeat-element": "1.1.2",
+ "repeat-string": "1.6.1"
+ }
+ },
+ "find-replace": {
+ "version": "1.0.3",
+ "resolved": "https://registry.npmjs.org/find-replace/-/find-replace-1.0.3.tgz",
+ "integrity": "sha1-uI5zZNLZyVlVnziMZmcNYTBEH6A=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "test-value": "2.1.0"
+ }
+ },
+ "findup-sync": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/findup-sync/-/findup-sync-2.0.0.tgz",
+ "integrity": "sha1-kyaxSIwi0aYIhlCoaQGy2akKLLw=",
+ "dev": true,
+ "requires": {
+ "detect-file": "1.0.0",
+ "is-glob": "3.1.0",
+ "micromatch": "3.1.5",
+ "resolve-dir": "1.0.1"
+ },
+ "dependencies": {
+ "arr-diff": {
+ "version": "4.0.0",
+ "resolved": "https://registry.npmjs.org/arr-diff/-/arr-diff-4.0.0.tgz",
+ "integrity": "sha1-1kYQdP6/7HHn4VI1dhoyml3HxSA=",
+ "dev": true
+ },
+ "array-unique": {
+ "version": "0.3.2",
+ "resolved": "https://registry.npmjs.org/array-unique/-/array-unique-0.3.2.tgz",
+ "integrity": "sha1-qJS3XUvE9s1nnvMkSp/Y9Gri1Cg=",
+ "dev": true
+ },
+ "braces": {
+ "version": "2.3.0",
+ "resolved": "https://registry.npmjs.org/braces/-/braces-2.3.0.tgz",
+ "integrity": "sha512-P4O8UQRdGiMLWSizsApmXVQDBS6KCt7dSexgLKBmH5Hr1CZq7vsnscFh8oR1sP1ab1Zj0uCHCEzZeV6SfUf3rA==",
+ "dev": true,
+ "requires": {
+ "arr-flatten": "1.1.0",
+ "array-unique": "0.3.2",
+ "define-property": "1.0.0",
+ "extend-shallow": "2.0.1",
+ "fill-range": "4.0.0",
+ "isobject": "3.0.1",
+ "repeat-element": "1.1.2",
+ "snapdragon": "0.8.1",
+ "snapdragon-node": "2.1.1",
+ "split-string": "3.1.0",
+ "to-regex": "3.0.1"
+ }
+ },
+ "expand-brackets": {
+ "version": "2.1.4",
+ "resolved": "https://registry.npmjs.org/expand-brackets/-/expand-brackets-2.1.4.tgz",
+ "integrity": "sha1-t3c14xXOMPa27/D4OwQVGiJEliI=",
+ "dev": true,
+ "requires": {
+ "debug": "2.6.8",
+ "define-property": "0.2.5",
+ "extend-shallow": "2.0.1",
+ "posix-character-classes": "0.1.1",
+ "regex-not": "1.0.0",
+ "snapdragon": "0.8.1",
+ "to-regex": "3.0.1"
+ },
+ "dependencies": {
+ "define-property": {
+ "version": "0.2.5",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-0.2.5.tgz",
+ "integrity": "sha1-w1se+RjsPJkPmlvFe+BKrOxcgRY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "0.1.6"
+ }
+ }
+ }
+ },
+ "extglob": {
+ "version": "2.0.4",
+ "resolved": "https://registry.npmjs.org/extglob/-/extglob-2.0.4.tgz",
+ "integrity": "sha512-Nmb6QXkELsuBr24CJSkilo6UHHgbekK5UiZgfE6UHD3Eb27YC6oD+bhcT+tJ6cl8dmsgdQxnWlcry8ksBIBLpw==",
+ "dev": true,
+ "requires": {
+ "array-unique": "0.3.2",
+ "define-property": "1.0.0",
+ "expand-brackets": "2.1.4",
+ "extend-shallow": "2.0.1",
+ "fragment-cache": "0.2.1",
+ "regex-not": "1.0.0",
+ "snapdragon": "0.8.1",
+ "to-regex": "3.0.1"
+ }
+ },
+ "fill-range": {
+ "version": "4.0.0",
+ "resolved": "https://registry.npmjs.org/fill-range/-/fill-range-4.0.0.tgz",
+ "integrity": "sha1-1USBHUKPmOsGpj3EAtJAPDKMOPc=",
+ "dev": true,
+ "requires": {
+ "extend-shallow": "2.0.1",
+ "is-number": "3.0.0",
+ "repeat-string": "1.6.1",
+ "to-regex-range": "2.1.1"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-0.1.6.tgz",
+ "integrity": "sha1-qeEss66Nh2cn7u84Q/igiXtcmNY=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-data-descriptor": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-0.1.4.tgz",
+ "integrity": "sha1-C17mSDiOLIYCgueT8YVv7D8wG1Y=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-0.1.6.tgz",
+ "integrity": "sha512-avDYr0SB3DwO9zsMov0gKCESFYqCnE4hq/4z3TdUlukEy5t9C0YRq7HLrsN52NAcqXKaepeCD0n+B0arnVG3Hg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "0.1.6",
+ "is-data-descriptor": "0.1.4",
+ "kind-of": "5.1.0"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ }
+ }
+ },
+ "is-extglob": {
+ "version": "2.1.1",
+ "resolved": "https://registry.npmjs.org/is-extglob/-/is-extglob-2.1.1.tgz",
+ "integrity": "sha1-qIwCU1eR8C7TfHahueqXc8gz+MI=",
+ "dev": true
+ },
+ "is-glob": {
+ "version": "3.1.0",
+ "resolved": "https://registry.npmjs.org/is-glob/-/is-glob-3.1.0.tgz",
+ "integrity": "sha1-e6WuJCF4BKxwcHuWkiVnSGzD6Eo=",
+ "dev": true,
+ "requires": {
+ "is-extglob": "2.1.1"
+ }
+ },
+ "is-number": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/is-number/-/is-number-3.0.0.tgz",
+ "integrity": "sha1-JP1iAaR4LPUFYcgQJ2r8fRLXEZU=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ },
+ "kind-of": {
+ "version": "6.0.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-6.0.2.tgz",
+ "integrity": "sha512-s5kLOcnH0XqDO+FvuaLX8DDjZ18CGFk7VygH40QoKPUQhW4e2rvM0rwUq0t8IQDOwYSeLK01U90OjzBTme2QqA==",
+ "dev": true
+ },
+ "micromatch": {
+ "version": "3.1.5",
+ "resolved": "https://registry.npmjs.org/micromatch/-/micromatch-3.1.5.tgz",
+ "integrity": "sha512-ykttrLPQrz1PUJcXjwsTUjGoPJ64StIGNE2lGVD1c9CuguJ+L7/navsE8IcDNndOoCMvYV0qc/exfVbMHkUhvA==",
+ "dev": true,
+ "requires": {
+ "arr-diff": "4.0.0",
+ "array-unique": "0.3.2",
+ "braces": "2.3.0",
+ "define-property": "1.0.0",
+ "extend-shallow": "2.0.1",
+ "extglob": "2.0.4",
+ "fragment-cache": "0.2.1",
+ "kind-of": "6.0.2",
+ "nanomatch": "1.2.7",
+ "object.pick": "1.3.0",
+ "regex-not": "1.0.0",
+ "snapdragon": "0.8.1",
+ "to-regex": "3.0.1"
+ }
+ }
+ }
+ },
+ "for-in": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/for-in/-/for-in-1.0.2.tgz",
+ "integrity": "sha1-gQaNKVqBQuwKxybG4iAMMPttXoA=",
+ "dev": true
+ },
+ "for-own": {
+ "version": "0.1.5",
+ "resolved": "https://registry.npmjs.org/for-own/-/for-own-0.1.5.tgz",
+ "integrity": "sha1-UmXGgaTylNq78XyVCbZ2OqhFEM4=",
+ "dev": true,
+ "requires": {
+ "for-in": "1.0.2"
+ }
+ },
+ "forever-agent": {
+ "version": "0.6.1",
+ "resolved": "https://registry.npmjs.org/forever-agent/-/forever-agent-0.6.1.tgz",
+ "integrity": "sha1-+8cfDEGt6zf5bFd60e1C2P2sypE=",
+ "optional": true
+ },
+ "form-data": {
+ "version": "2.1.4",
+ "resolved": "https://registry.npmjs.org/form-data/-/form-data-2.1.4.tgz",
+ "integrity": "sha1-M8GDrPGTJ27KqYFDpp6Uv+4XUNE=",
"optional": true,
"requires": {
- "once": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
- "wrappy": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz"
+ "asynckit": "0.4.0",
+ "combined-stream": "1.0.5",
+ "mime-types": "2.1.17"
+ }
+ },
+ "formidable": {
+ "version": "1.1.1",
+ "resolved": "https://registry.npmjs.org/formidable/-/formidable-1.1.1.tgz",
+ "integrity": "sha1-lriIb3w8NQi5Mta9cMTTqI818ak="
+ },
+ "fragment-cache": {
+ "version": "0.2.1",
+ "resolved": "https://registry.npmjs.org/fragment-cache/-/fragment-cache-0.2.1.tgz",
+ "integrity": "sha1-QpD60n8T6Jvn8zeZxrxaCr//DRk=",
+ "dev": true,
+ "requires": {
+ "map-cache": "0.2.2"
+ }
+ },
+ "fs-then-native": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/fs-then-native/-/fs-then-native-2.0.0.tgz",
+ "integrity": "sha1-GaEk2U2QwiyOBF8ujdbr6jbUjGc=",
+ "dev": true
+ },
+ "fs.realpath": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz",
+ "integrity": "sha1-FQStJSMVjKpA20onh8sBQRmU6k8="
+ },
+ "fsevents": {
+ "version": "1.1.3",
+ "resolved": "https://registry.npmjs.org/fsevents/-/fsevents-1.1.3.tgz",
+ "integrity": "sha512-WIr7iDkdmdbxu/Gh6eKEZJL6KPE74/5MEsf2whTOFNxbIoIixogroLdKYqB6FDav4Wavh/lZdzzd3b2KxIXC5Q==",
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "nan": "2.6.2",
+ "node-pre-gyp": "0.6.39"
+ },
+ "dependencies": {
+ "abbrev": {
+ "version": "1.1.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "ajv": {
+ "version": "4.11.8",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "co": "4.6.0",
+ "json-stable-stringify": "1.0.1"
+ }
+ },
+ "ansi-regex": {
+ "version": "2.1.1",
+ "bundled": true,
+ "dev": true
+ },
+ "aproba": {
+ "version": "1.1.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "are-we-there-yet": {
+ "version": "1.1.4",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "delegates": "1.0.0",
+ "readable-stream": "2.2.9"
+ }
+ },
+ "asn1": {
+ "version": "0.2.3",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "assert-plus": {
+ "version": "0.2.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "asynckit": {
+ "version": "0.4.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "aws-sign2": {
+ "version": "0.6.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "aws4": {
+ "version": "1.6.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "balanced-match": {
+ "version": "0.4.2",
+ "bundled": true,
+ "dev": true
+ },
+ "bcrypt-pbkdf": {
+ "version": "1.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "tweetnacl": "0.14.5"
+ }
+ },
+ "block-stream": {
+ "version": "0.0.9",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "inherits": "2.0.3"
+ }
+ },
+ "boom": {
+ "version": "2.10.1",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "hoek": "2.16.3"
+ }
+ },
+ "brace-expansion": {
+ "version": "1.1.7",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "balanced-match": "0.4.2",
+ "concat-map": "0.0.1"
+ }
+ },
+ "buffer-shims": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true
+ },
+ "caseless": {
+ "version": "0.12.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "co": {
+ "version": "4.6.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "code-point-at": {
+ "version": "1.1.0",
+ "bundled": true,
+ "dev": true
+ },
+ "combined-stream": {
+ "version": "1.0.5",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "delayed-stream": "1.0.0"
+ }
+ },
+ "concat-map": {
+ "version": "0.0.1",
+ "bundled": true,
+ "dev": true
+ },
+ "console-control-strings": {
+ "version": "1.1.0",
+ "bundled": true,
+ "dev": true
+ },
+ "core-util-is": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true
+ },
+ "cryptiles": {
+ "version": "2.0.5",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "boom": "2.10.1"
+ }
+ },
+ "dashdash": {
+ "version": "1.14.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "assert-plus": "1.0.0"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ }
+ }
+ },
+ "debug": {
+ "version": "2.6.8",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "ms": "2.0.0"
+ }
+ },
+ "deep-extend": {
+ "version": "0.4.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "delayed-stream": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true
+ },
+ "delegates": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "detect-libc": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "ecc-jsbn": {
+ "version": "0.1.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "jsbn": "0.1.1"
+ }
+ },
+ "extend": {
+ "version": "3.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "extsprintf": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true
+ },
+ "forever-agent": {
+ "version": "0.6.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "form-data": {
+ "version": "2.1.4",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "asynckit": "0.4.0",
+ "combined-stream": "1.0.5",
+ "mime-types": "2.1.15"
+ }
+ },
+ "fs.realpath": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true
+ },
+ "fstream": {
+ "version": "1.0.11",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "graceful-fs": "4.1.11",
+ "inherits": "2.0.3",
+ "mkdirp": "0.5.1",
+ "rimraf": "2.6.1"
+ }
+ },
+ "fstream-ignore": {
+ "version": "1.0.5",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "fstream": "1.0.11",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4"
+ }
+ },
+ "gauge": {
+ "version": "2.7.4",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "aproba": "1.1.1",
+ "console-control-strings": "1.1.0",
+ "has-unicode": "2.0.1",
+ "object-assign": "4.1.1",
+ "signal-exit": "3.0.2",
+ "string-width": "1.0.2",
+ "strip-ansi": "3.0.1",
+ "wide-align": "1.1.2"
+ }
+ },
+ "getpass": {
+ "version": "0.1.7",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "assert-plus": "1.0.0"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ }
+ }
+ },
+ "glob": {
+ "version": "7.1.2",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "fs.realpath": "1.0.0",
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
+ },
+ "graceful-fs": {
+ "version": "4.1.11",
+ "bundled": true,
+ "dev": true
+ },
+ "har-schema": {
+ "version": "1.0.5",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "har-validator": {
+ "version": "4.2.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "ajv": "4.11.8",
+ "har-schema": "1.0.5"
+ }
+ },
+ "has-unicode": {
+ "version": "2.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "hawk": {
+ "version": "3.1.3",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "boom": "2.10.1",
+ "cryptiles": "2.0.5",
+ "hoek": "2.16.3",
+ "sntp": "1.0.9"
+ }
+ },
+ "hoek": {
+ "version": "2.16.3",
+ "bundled": true,
+ "dev": true
+ },
+ "http-signature": {
+ "version": "1.1.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "assert-plus": "0.2.0",
+ "jsprim": "1.4.0",
+ "sshpk": "1.13.0"
+ }
+ },
+ "inflight": {
+ "version": "1.0.6",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "once": "1.4.0",
+ "wrappy": "1.0.2"
+ }
+ },
+ "inherits": {
+ "version": "2.0.3",
+ "bundled": true,
+ "dev": true
+ },
+ "ini": {
+ "version": "1.3.4",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "is-fullwidth-code-point": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "number-is-nan": "1.0.1"
+ }
+ },
+ "is-typedarray": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "isarray": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true
+ },
+ "isstream": {
+ "version": "0.1.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "jodid25519": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "jsbn": "0.1.1"
+ }
+ },
+ "jsbn": {
+ "version": "0.1.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "json-schema": {
+ "version": "0.2.3",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "json-stable-stringify": {
+ "version": "1.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "jsonify": "0.0.0"
+ }
+ },
+ "json-stringify-safe": {
+ "version": "5.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "jsonify": {
+ "version": "0.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "jsprim": {
+ "version": "1.4.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "assert-plus": "1.0.0",
+ "extsprintf": "1.0.2",
+ "json-schema": "0.2.3",
+ "verror": "1.3.6"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ }
+ }
+ },
+ "mime-db": {
+ "version": "1.27.0",
+ "bundled": true,
+ "dev": true
+ },
+ "mime-types": {
+ "version": "2.1.15",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "mime-db": "1.27.0"
+ }
+ },
+ "minimatch": {
+ "version": "3.0.4",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "brace-expansion": "1.1.7"
+ }
+ },
+ "minimist": {
+ "version": "0.0.8",
+ "bundled": true,
+ "dev": true
+ },
+ "mkdirp": {
+ "version": "0.5.1",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "minimist": "0.0.8"
+ }
+ },
+ "ms": {
+ "version": "2.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "node-pre-gyp": {
+ "version": "0.6.39",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "detect-libc": "1.0.2",
+ "hawk": "3.1.3",
+ "mkdirp": "0.5.1",
+ "nopt": "4.0.1",
+ "npmlog": "4.1.0",
+ "rc": "1.2.1",
+ "request": "2.81.0",
+ "rimraf": "2.6.1",
+ "semver": "5.3.0",
+ "tar": "2.2.1",
+ "tar-pack": "3.4.0"
+ }
+ },
+ "nopt": {
+ "version": "4.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "abbrev": "1.1.0",
+ "osenv": "0.1.4"
+ }
+ },
+ "npmlog": {
+ "version": "4.1.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "are-we-there-yet": "1.1.4",
+ "console-control-strings": "1.1.0",
+ "gauge": "2.7.4",
+ "set-blocking": "2.0.0"
+ }
+ },
+ "number-is-nan": {
+ "version": "1.0.1",
+ "bundled": true,
+ "dev": true
+ },
+ "oauth-sign": {
+ "version": "0.8.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "object-assign": {
+ "version": "4.1.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "once": {
+ "version": "1.4.0",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "wrappy": "1.0.2"
+ }
+ },
+ "os-homedir": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "os-tmpdir": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "osenv": {
+ "version": "0.1.4",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "os-homedir": "1.0.2",
+ "os-tmpdir": "1.0.2"
+ }
+ },
+ "path-is-absolute": {
+ "version": "1.0.1",
+ "bundled": true,
+ "dev": true
+ },
+ "performance-now": {
+ "version": "0.2.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "process-nextick-args": {
+ "version": "1.0.7",
+ "bundled": true,
+ "dev": true
+ },
+ "punycode": {
+ "version": "1.4.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "qs": {
+ "version": "6.4.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "rc": {
+ "version": "1.2.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "deep-extend": "0.4.2",
+ "ini": "1.3.4",
+ "minimist": "1.2.0",
+ "strip-json-comments": "2.0.1"
+ },
+ "dependencies": {
+ "minimist": {
+ "version": "1.2.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ }
+ }
+ },
+ "readable-stream": {
+ "version": "2.2.9",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "buffer-shims": "1.0.0",
+ "core-util-is": "1.0.2",
+ "inherits": "2.0.3",
+ "isarray": "1.0.0",
+ "process-nextick-args": "1.0.7",
+ "string_decoder": "1.0.1",
+ "util-deprecate": "1.0.2"
+ }
+ },
+ "request": {
+ "version": "2.81.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "aws-sign2": "0.6.0",
+ "aws4": "1.6.0",
+ "caseless": "0.12.0",
+ "combined-stream": "1.0.5",
+ "extend": "3.0.1",
+ "forever-agent": "0.6.1",
+ "form-data": "2.1.4",
+ "har-validator": "4.2.1",
+ "hawk": "3.1.3",
+ "http-signature": "1.1.1",
+ "is-typedarray": "1.0.0",
+ "isstream": "0.1.2",
+ "json-stringify-safe": "5.0.1",
+ "mime-types": "2.1.15",
+ "oauth-sign": "0.8.2",
+ "performance-now": "0.2.0",
+ "qs": "6.4.0",
+ "safe-buffer": "5.0.1",
+ "stringstream": "0.0.5",
+ "tough-cookie": "2.3.2",
+ "tunnel-agent": "0.6.0",
+ "uuid": "3.0.1"
+ }
+ },
+ "rimraf": {
+ "version": "2.6.1",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "glob": "7.1.2"
+ }
+ },
+ "safe-buffer": {
+ "version": "5.0.1",
+ "bundled": true,
+ "dev": true
+ },
+ "semver": {
+ "version": "5.3.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "set-blocking": {
+ "version": "2.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "signal-exit": {
+ "version": "3.0.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "sntp": {
+ "version": "1.0.9",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "hoek": "2.16.3"
+ }
+ },
+ "sshpk": {
+ "version": "1.13.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "asn1": "0.2.3",
+ "assert-plus": "1.0.0",
+ "bcrypt-pbkdf": "1.0.1",
+ "dashdash": "1.14.1",
+ "ecc-jsbn": "0.1.1",
+ "getpass": "0.1.7",
+ "jodid25519": "1.0.2",
+ "jsbn": "0.1.1",
+ "tweetnacl": "0.14.5"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ }
+ }
+ },
+ "string-width": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "code-point-at": "1.1.0",
+ "is-fullwidth-code-point": "1.0.0",
+ "strip-ansi": "3.0.1"
+ }
+ },
+ "string_decoder": {
+ "version": "1.0.1",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "safe-buffer": "5.0.1"
+ }
+ },
+ "stringstream": {
+ "version": "0.0.5",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "strip-ansi": {
+ "version": "3.0.1",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "ansi-regex": "2.1.1"
+ }
+ },
+ "strip-json-comments": {
+ "version": "2.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "tar": {
+ "version": "2.2.1",
+ "bundled": true,
+ "dev": true,
+ "requires": {
+ "block-stream": "0.0.9",
+ "fstream": "1.0.11",
+ "inherits": "2.0.3"
+ }
+ },
+ "tar-pack": {
+ "version": "3.4.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "debug": "2.6.8",
+ "fstream": "1.0.11",
+ "fstream-ignore": "1.0.5",
+ "once": "1.4.0",
+ "readable-stream": "2.2.9",
+ "rimraf": "2.6.1",
+ "tar": "2.2.1",
+ "uid-number": "0.0.6"
+ }
+ },
+ "tough-cookie": {
+ "version": "2.3.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "punycode": "1.4.1"
+ }
+ },
+ "tunnel-agent": {
+ "version": "0.6.0",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "safe-buffer": "5.0.1"
+ }
+ },
+ "tweetnacl": {
+ "version": "0.14.5",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "uid-number": {
+ "version": "0.0.6",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "util-deprecate": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true
+ },
+ "uuid": {
+ "version": "3.0.1",
+ "bundled": true,
+ "dev": true,
+ "optional": true
+ },
+ "verror": {
+ "version": "1.3.6",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "extsprintf": "1.0.2"
+ }
+ },
+ "wide-align": {
+ "version": "1.1.2",
+ "bundled": true,
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "string-width": "1.0.2"
+ }
+ },
+ "wrappy": {
+ "version": "1.0.2",
+ "bundled": true,
+ "dev": true
+ }
+ }
+ },
+ "fstream": {
+ "version": "1.0.11",
+ "resolved": "https://registry.npmjs.org/fstream/-/fstream-1.0.11.tgz",
+ "integrity": "sha1-XB+x8RdHcRTwYyoOtLcbPLD9MXE=",
+ "requires": {
+ "graceful-fs": "4.1.11",
+ "inherits": "2.0.3",
+ "mkdirp": "0.5.1",
+ "rimraf": "2.4.5"
+ }
+ },
+ "fstream-ignore": {
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/fstream-ignore/-/fstream-ignore-1.0.5.tgz",
+ "integrity": "sha1-nDHa40dnAY/h0kmyTa2mfQktoQU=",
+ "optional": true,
+ "requires": {
+ "fstream": "1.0.11",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4"
+ }
+ },
+ "gauge": {
+ "version": "2.7.4",
+ "resolved": "https://registry.npmjs.org/gauge/-/gauge-2.7.4.tgz",
+ "integrity": "sha1-LANAXHU4w51+s3sxcCLjJfsBi/c=",
+ "optional": true,
+ "requires": {
+ "aproba": "1.2.0",
+ "console-control-strings": "1.1.0",
+ "has-unicode": "2.0.1",
+ "object-assign": "4.1.1",
+ "signal-exit": "3.0.2",
+ "string-width": "1.0.2",
+ "strip-ansi": "3.0.1",
+ "wide-align": "1.1.2"
+ }
+ },
+ "get-value": {
+ "version": "2.0.6",
+ "resolved": "https://registry.npmjs.org/get-value/-/get-value-2.0.6.tgz",
+ "integrity": "sha1-3BXKHGcjh8p2vTesCjlbogQqLCg=",
+ "dev": true
+ },
+ "getpass": {
+ "version": "0.1.7",
+ "resolved": "https://registry.npmjs.org/getpass/-/getpass-0.1.7.tgz",
+ "integrity": "sha1-Xv+OPmhNVprkyysSgmBOi6YhSfo=",
+ "requires": {
+ "assert-plus": "1.0.0"
+ }
+ },
+ "glob": {
+ "version": "6.0.4",
+ "resolved": "https://registry.npmjs.org/glob/-/glob-6.0.4.tgz",
+ "integrity": "sha1-DwiGD2oVUSey+t1PnOJLGqtuTSI=",
+ "requires": {
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
+ },
+ "glob-base": {
+ "version": "0.3.0",
+ "resolved": "https://registry.npmjs.org/glob-base/-/glob-base-0.3.0.tgz",
+ "integrity": "sha1-27Fk9iIbHAscz4Kuoyi0l98Oo8Q=",
+ "dev": true,
+ "requires": {
+ "glob-parent": "2.0.0",
+ "is-glob": "2.0.1"
+ }
+ },
+ "glob-parent": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/glob-parent/-/glob-parent-2.0.0.tgz",
+ "integrity": "sha1-gTg9ctsFT8zPUzbaqQLxgvbtuyg=",
+ "dev": true,
+ "requires": {
+ "is-glob": "2.0.1"
+ }
+ },
+ "global-modules": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/global-modules/-/global-modules-1.0.0.tgz",
+ "integrity": "sha512-sKzpEkf11GpOFuw0Zzjzmt4B4UZwjOcG757PPvrfhxcLFbq0wpsgpOqxpxtxFiCG4DtG93M6XRVbF2oGdev7bg==",
+ "dev": true,
+ "requires": {
+ "global-prefix": "1.0.2",
+ "is-windows": "1.0.1",
+ "resolve-dir": "1.0.1"
+ },
+ "dependencies": {
+ "is-windows": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/is-windows/-/is-windows-1.0.1.tgz",
+ "integrity": "sha1-MQ23D3QtJZoWo2kgK1GvhCMzENk=",
+ "dev": true
+ }
+ }
+ },
+ "global-prefix": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/global-prefix/-/global-prefix-1.0.2.tgz",
+ "integrity": "sha1-2/dDxsFJklk8ZVVoy2btMsASLr4=",
+ "dev": true,
+ "requires": {
+ "expand-tilde": "2.0.2",
+ "homedir-polyfill": "1.0.1",
+ "ini": "1.3.5",
+ "is-windows": "1.0.1",
+ "which": "1.3.0"
+ },
+ "dependencies": {
+ "is-windows": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/is-windows/-/is-windows-1.0.1.tgz",
+ "integrity": "sha1-MQ23D3QtJZoWo2kgK1GvhCMzENk=",
+ "dev": true
+ }
+ }
+ },
+ "gpio": {
+ "version": "0.2.7",
+ "resolved": "https://registry.npmjs.org/gpio/-/gpio-0.2.7.tgz",
+ "integrity": "sha1-vzhsiJYe/QpPag/3FnrA/zmX6rk="
+ },
+ "graceful-fs": {
+ "version": "4.1.11",
+ "resolved": "https://registry.npmjs.org/graceful-fs/-/graceful-fs-4.1.11.tgz",
+ "integrity": "sha1-Dovf5NHduIVNZOBOp8AOKgJuVlg="
+ },
+ "handle-thing": {
+ "version": "1.2.5",
+ "resolved": "https://registry.npmjs.org/handle-thing/-/handle-thing-1.2.5.tgz",
+ "integrity": "sha1-/Xqtcmvxpf0W38KbL3pmAdJxOcQ="
+ },
+ "handlebars": {
+ "version": "3.0.3",
+ "resolved": "https://registry.npmjs.org/handlebars/-/handlebars-3.0.3.tgz",
+ "integrity": "sha1-DgllGi8Ps8lJFgWDcQ1VH5Lm0q0=",
+ "dev": true,
+ "requires": {
+ "optimist": "0.6.1",
+ "source-map": "0.1.43",
+ "uglify-js": "2.3.6"
+ }
+ },
+ "har-schema": {
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/har-schema/-/har-schema-1.0.5.tgz",
+ "integrity": "sha1-0mMTX0MwfALGAq/I/pWXDAFRNp4=",
+ "optional": true
+ },
+ "har-validator": {
+ "version": "4.2.1",
+ "resolved": "https://registry.npmjs.org/har-validator/-/har-validator-4.2.1.tgz",
+ "integrity": "sha1-M0gdDxu/9gDdID11gSpqX7oALio=",
+ "optional": true,
+ "requires": {
+ "ajv": "4.11.8",
+ "har-schema": "1.0.5"
+ }
+ },
+ "has-unicode": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/has-unicode/-/has-unicode-2.0.1.tgz",
+ "integrity": "sha1-4Ob+aijPUROIVeCG0Wkedx3iqLk=",
+ "optional": true
+ },
+ "has-value": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/has-value/-/has-value-1.0.0.tgz",
+ "integrity": "sha1-GLKB2lhbHFxR3vJMkw7SmgvmsXc=",
+ "dev": true,
+ "requires": {
+ "get-value": "2.0.6",
+ "has-values": "1.0.0",
+ "isobject": "3.0.1"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
+ "has-values": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/has-values/-/has-values-1.0.0.tgz",
+ "integrity": "sha1-lbC2P+whRmGab+V/51Yo1aOe/k8=",
+ "dev": true,
+ "requires": {
+ "is-number": "3.0.0",
+ "kind-of": "4.0.0"
+ },
+ "dependencies": {
+ "is-number": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/is-number/-/is-number-3.0.0.tgz",
+ "integrity": "sha1-JP1iAaR4LPUFYcgQJ2r8fRLXEZU=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "kind-of": {
+ "version": "4.0.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-4.0.0.tgz",
+ "integrity": "sha1-IIE989cSkosgc3hpGkUGb65y3Vc=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "hawk": {
+ "version": "3.1.3",
+ "resolved": "https://registry.npmjs.org/hawk/-/hawk-3.1.3.tgz",
+ "integrity": "sha1-B4REvXwWQLD+VA0sm3PVlnjo4cQ=",
+ "requires": {
+ "boom": "2.10.1",
+ "cryptiles": "2.0.5",
+ "hoek": "2.16.3",
+ "sntp": "1.0.9"
+ }
+ },
+ "hoek": {
+ "version": "2.16.3",
+ "resolved": "https://registry.npmjs.org/hoek/-/hoek-2.16.3.tgz",
+ "integrity": "sha1-ILt0A9POo5jpHcRxCo/xuCdKJe0="
+ },
+ "home-path": {
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/home-path/-/home-path-1.0.5.tgz",
+ "integrity": "sha1-eIspgVsS1Tus9XVkhHbm+QQdEz8=",
+ "dev": true
+ },
+ "homedir-polyfill": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/homedir-polyfill/-/homedir-polyfill-1.0.1.tgz",
+ "integrity": "sha1-TCu8inWJmP7r9e1oWA921GdotLw=",
+ "dev": true,
+ "requires": {
+ "parse-passwd": "1.0.0"
+ }
+ },
+ "hpack.js": {
+ "version": "2.1.6",
+ "resolved": "https://registry.npmjs.org/hpack.js/-/hpack.js-2.1.6.tgz",
+ "integrity": "sha1-h3dMCUnlE/QuhFdbPEVoH63ioLI=",
+ "requires": {
+ "inherits": "2.0.3",
+ "obuf": "1.1.1",
+ "readable-stream": "2.3.3",
+ "wbuf": "1.7.2"
+ }
+ },
+ "http-deceiver": {
+ "version": "1.2.7",
+ "resolved": "https://registry.npmjs.org/http-deceiver/-/http-deceiver-1.2.7.tgz",
+ "integrity": "sha1-+nFolEq5pRnTN8sL7HKE3D5yPYc="
+ },
+ "http-signature": {
+ "version": "1.2.0",
+ "resolved": "https://registry.npmjs.org/http-signature/-/http-signature-1.2.0.tgz",
+ "integrity": "sha1-muzZJRFHcvPZW2WmCruPfBj7rOE=",
+ "requires": {
+ "assert-plus": "1.0.0",
+ "jsprim": "1.4.1",
+ "sshpk": "1.13.1"
+ }
+ },
+ "inflight": {
+ "version": "1.0.6",
+ "resolved": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz",
+ "integrity": "sha1-Sb1jMdfQLQwJvJEKEHW6gWW1bfk=",
+ "requires": {
+ "once": "1.4.0",
+ "wrappy": "1.0.2"
}
},
"inherits": {
- "version": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz",
+ "version": "2.0.3",
+ "resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz",
"integrity": "sha1-Yzwsg+PaQqUC9SRmAiSA9CCCYd4="
},
+ "ini": {
+ "version": "1.3.5",
+ "resolved": "https://registry.npmjs.org/ini/-/ini-1.3.5.tgz",
+ "integrity": "sha512-RZY5huIKCMRWDUqZlEi72f/lmXKMvuszcMBduliQ3nnWbx9X/ZBQO7DijMEYS9EhHBb2qacRUMtC7svLwe0lcw=="
+ },
+ "is-absolute": {
+ "version": "0.2.6",
+ "resolved": "https://registry.npmjs.org/is-absolute/-/is-absolute-0.2.6.tgz",
+ "integrity": "sha1-IN5p89uULvLYe5wto28XIjWxtes=",
+ "requires": {
+ "is-relative": "0.2.1",
+ "is-windows": "0.2.0"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-1.0.0.tgz",
+ "integrity": "sha512-m5hnHTkcVsPfqx3AKlyttIPb7J+XykHvJP2B9bZDjlhLIoEq4XoK64Vg7boZlVWYK6LUY94dYPEE7Lh0ZkZKcQ==",
+ "dev": true,
+ "requires": {
+ "kind-of": "6.0.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "6.0.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-6.0.2.tgz",
+ "integrity": "sha512-s5kLOcnH0XqDO+FvuaLX8DDjZ18CGFk7VygH40QoKPUQhW4e2rvM0rwUq0t8IQDOwYSeLK01U90OjzBTme2QqA==",
+ "dev": true
+ }
+ }
+ },
+ "is-binary-path": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/is-binary-path/-/is-binary-path-1.0.1.tgz",
+ "integrity": "sha1-dfFmQrSA8YenEcgUFh/TpKdlWJg=",
+ "dev": true,
+ "requires": {
+ "binary-extensions": "1.11.0"
+ }
+ },
+ "is-buffer": {
+ "version": "1.1.6",
+ "resolved": "https://registry.npmjs.org/is-buffer/-/is-buffer-1.1.6.tgz",
+ "integrity": "sha512-NcdALwpXkTm5Zvvbk7owOUSvVvBKDgKP5/ewfXEznmQFfs4ZRmanOeKBTjRVjka3QFoN6XJ+9F3USqfHqTaU5w==",
+ "dev": true
+ },
+ "is-data-descriptor": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-1.0.0.tgz",
+ "integrity": "sha512-jbRXy1FmtAoCjQkVmIVYwuuqDFUbaOeDjmed1tOGPrsMhtJA4rD9tkgA0F1qJ3gRFRXcHYVkdeaP50Q5rE/jLQ==",
+ "dev": true,
+ "requires": {
+ "kind-of": "6.0.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "6.0.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-6.0.2.tgz",
+ "integrity": "sha512-s5kLOcnH0XqDO+FvuaLX8DDjZ18CGFk7VygH40QoKPUQhW4e2rvM0rwUq0t8IQDOwYSeLK01U90OjzBTme2QqA==",
+ "dev": true
+ }
+ }
+ },
+ "is-descriptor": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-1.0.2.tgz",
+ "integrity": "sha512-2eis5WqQGV7peooDyLmNEPUrps9+SXX5c9pL3xEB+4e9HnGuDa7mB7kHxHw4CbqS9k1T2hOH3miL8n8WtiYVtg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "1.0.0",
+ "is-data-descriptor": "1.0.0",
+ "kind-of": "6.0.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "6.0.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-6.0.2.tgz",
+ "integrity": "sha512-s5kLOcnH0XqDO+FvuaLX8DDjZ18CGFk7VygH40QoKPUQhW4e2rvM0rwUq0t8IQDOwYSeLK01U90OjzBTme2QqA==",
+ "dev": true
+ }
+ }
+ },
+ "is-dotfile": {
+ "version": "1.0.3",
+ "resolved": "https://registry.npmjs.org/is-dotfile/-/is-dotfile-1.0.3.tgz",
+ "integrity": "sha1-pqLzL/0t+wT1yiXs0Pa4PPeYoeE=",
+ "dev": true
+ },
+ "is-equal-shallow": {
+ "version": "0.1.3",
+ "resolved": "https://registry.npmjs.org/is-equal-shallow/-/is-equal-shallow-0.1.3.tgz",
+ "integrity": "sha1-IjgJj8Ih3gvPpdnqxMRdY4qhxTQ=",
+ "dev": true,
+ "requires": {
+ "is-primitive": "2.0.0"
+ }
+ },
+ "is-extendable": {
+ "version": "0.1.1",
+ "resolved": "https://registry.npmjs.org/is-extendable/-/is-extendable-0.1.1.tgz",
+ "integrity": "sha1-YrEQ4omkcUGOPsNqYX1HLjAd/Ik=",
+ "dev": true
+ },
+ "is-extglob": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-extglob/-/is-extglob-1.0.0.tgz",
+ "integrity": "sha1-rEaBd8SUNAWgkvyPKXYMb/xiBsA=",
+ "dev": true
+ },
+ "is-fullwidth-code-point": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-fullwidth-code-point/-/is-fullwidth-code-point-1.0.0.tgz",
+ "integrity": "sha1-754xOG8DGn8NZDr4L95QxFfvAMs=",
+ "requires": {
+ "number-is-nan": "1.0.1"
+ }
+ },
+ "is-glob": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/is-glob/-/is-glob-2.0.1.tgz",
+ "integrity": "sha1-0Jb5JqPe1WAPP9/ZEZjLCIjC2GM=",
+ "dev": true,
+ "requires": {
+ "is-extglob": "1.0.0"
+ }
+ },
+ "is-number": {
+ "version": "2.1.0",
+ "resolved": "https://registry.npmjs.org/is-number/-/is-number-2.1.0.tgz",
+ "integrity": "sha1-Afy7s5NGOlSPL0ZszhbezknbkI8=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ }
+ },
+ "is-odd": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-odd/-/is-odd-1.0.0.tgz",
+ "integrity": "sha1-O4qTLrAos3dcObsJ6RdnrM22kIg=",
+ "dev": true,
+ "requires": {
+ "is-number": "3.0.0"
+ },
+ "dependencies": {
+ "is-number": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/is-number/-/is-number-3.0.0.tgz",
+ "integrity": "sha1-JP1iAaR4LPUFYcgQJ2r8fRLXEZU=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ }
+ }
+ }
+ },
+ "is-plain-object": {
+ "version": "2.0.4",
+ "resolved": "https://registry.npmjs.org/is-plain-object/-/is-plain-object-2.0.4.tgz",
+ "integrity": "sha512-h5PpgXkWitc38BBMYawTYMWJHFZJVnBquFE57xFpjB8pJFiF6gZ+bU+WyI/yqXiFR5mdLsgYNaPe8uao6Uv9Og==",
+ "dev": true,
+ "requires": {
+ "isobject": "3.0.1"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
+ "is-posix-bracket": {
+ "version": "0.1.1",
+ "resolved": "https://registry.npmjs.org/is-posix-bracket/-/is-posix-bracket-0.1.1.tgz",
+ "integrity": "sha1-MzTceXdDaOkvAW5vvAqI9c1ua8Q=",
+ "dev": true
+ },
+ "is-primitive": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/is-primitive/-/is-primitive-2.0.0.tgz",
+ "integrity": "sha1-IHurkWOEmcB7Kt8kCkGochADRXU=",
+ "dev": true
+ },
"is-regexp": {
- "version": "https://registry.npmjs.org/is-regexp/-/is-regexp-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-regexp/-/is-regexp-1.0.0.tgz",
"integrity": "sha1-/S2INUXEa6xaYz57mgnof6LLUGk="
},
+ "is-relative": {
+ "version": "0.2.1",
+ "resolved": "https://registry.npmjs.org/is-relative/-/is-relative-0.2.1.tgz",
+ "integrity": "sha1-0n9MfVFtF1+2ENuEu+7yPDvJeqU=",
+ "requires": {
+ "is-unc-path": "0.1.2"
+ }
+ },
"is-supported-regexp-flag": {
- "version": "https://registry.npmjs.org/is-supported-regexp-flag/-/is-supported-regexp-flag-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-supported-regexp-flag/-/is-supported-regexp-flag-1.0.0.tgz",
"integrity": "sha1-i1IMhfrnolM4LUsCZS4EVXbhO7g="
},
+ "is-typedarray": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/is-typedarray/-/is-typedarray-1.0.0.tgz",
+ "integrity": "sha1-5HnICFjfDBsR3dppQPlgEfzaSpo=",
+ "optional": true
+ },
+ "is-unc-path": {
+ "version": "0.1.2",
+ "resolved": "https://registry.npmjs.org/is-unc-path/-/is-unc-path-0.1.2.tgz",
+ "integrity": "sha1-arBTpyVzwQJQ/0FqOBTDUXivObk=",
+ "requires": {
+ "unc-path-regex": "0.1.2"
+ }
+ },
+ "is-windows": {
+ "version": "0.2.0",
+ "resolved": "https://registry.npmjs.org/is-windows/-/is-windows-0.2.0.tgz",
+ "integrity": "sha1-3hqm1j6indJIc3tp8f+LgALSEIw="
+ },
"isarray": {
- "version": "https://registry.npmjs.org/isarray/-/isarray-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/isarray/-/isarray-1.0.0.tgz",
"integrity": "sha1-u5NdSFgsuhaMBoNJV6VKPgcSTxE="
},
+ "isexe": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/isexe/-/isexe-2.0.0.tgz",
+ "integrity": "sha1-6PvzdNxVb/iUehDcsFctYz8s+hA=",
+ "dev": true
+ },
+ "isobject": {
+ "version": "2.1.0",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-2.1.0.tgz",
+ "integrity": "sha1-8GVWEJaj8dou9GJy+BXIQNh+DIk=",
+ "dev": true,
+ "requires": {
+ "isarray": "1.0.0"
+ }
+ },
"isstream": {
"version": "0.1.2",
"resolved": "https://registry.npmjs.org/isstream/-/isstream-0.1.2.tgz",
"integrity": "sha1-R+Y/evVa+m+S4VAOaQ64uFKcCZo="
},
"js-message": {
- "version": "https://registry.npmjs.org/js-message/-/js-message-1.0.5.tgz",
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/js-message/-/js-message-1.0.5.tgz",
"integrity": "sha1-IwDSSxrwjondCVvBpMnJz8uJLRU="
},
"js-queue": {
- "version": "https://registry.npmjs.org/js-queue/-/js-queue-2.0.0.tgz",
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/js-queue/-/js-queue-2.0.0.tgz",
"integrity": "sha1-NiITz4YPRo8BJfxslqvBdCUx+Ug=",
"requires": {
- "easy-stack": "https://registry.npmjs.org/easy-stack/-/easy-stack-1.0.0.tgz"
+ "easy-stack": "1.0.0"
}
},
+ "js-reporters": {
+ "version": "1.2.1",
+ "resolved": "https://registry.npmjs.org/js-reporters/-/js-reporters-1.2.1.tgz",
+ "integrity": "sha1-+IxgjjJKM3OpW8xFrTBeXJecRZs=",
+ "dev": true
+ },
+ "js2xmlparser": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/js2xmlparser/-/js2xmlparser-1.0.0.tgz",
+ "integrity": "sha1-WhcPLo1kds5FQF4EgjJCUTeC/jA=",
+ "dev": true
+ },
"jsbn": {
- "version": "https://registry.npmjs.org/jsbn/-/jsbn-0.1.1.tgz",
+ "version": "0.1.1",
+ "resolved": "https://registry.npmjs.org/jsbn/-/jsbn-0.1.1.tgz",
"integrity": "sha1-peZUwuWi3rXyAdls77yoDA7y9RM=",
"optional": true
},
+ "jsdoc-75lb": {
+ "version": "3.6.0",
+ "resolved": "https://registry.npmjs.org/jsdoc-75lb/-/jsdoc-75lb-3.6.0.tgz",
+ "integrity": "sha1-qAcRlSi0AJzLyrSbdSL2P+xs0L0=",
+ "dev": true,
+ "requires": {
+ "bluebird": "3.4.7",
+ "catharsis": "0.8.9",
+ "escape-string-regexp": "1.0.5",
+ "espree": "3.1.7",
+ "js2xmlparser": "1.0.0",
+ "klaw": "1.3.1",
+ "marked": "0.3.6",
+ "mkdirp": "0.5.1",
+ "requizzle": "0.2.1",
+ "strip-json-comments": "2.0.1",
+ "taffydb": "2.6.2",
+ "underscore": "1.8.3"
+ }
+ },
+ "jsdoc-api": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/jsdoc-api/-/jsdoc-api-3.0.0.tgz",
+ "integrity": "sha1-DVJwAjX4Zb1Ki61evB77Vi/IrSo=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "cache-point": "0.4.1",
+ "collect-all": "1.0.3",
+ "file-set": "1.1.1",
+ "fs-then-native": "2.0.0",
+ "jsdoc-75lb": "3.6.0",
+ "object-to-spawn-args": "1.1.1",
+ "temp-path": "1.0.0",
+ "walk-back": "2.0.1"
+ }
+ },
+ "jsdoc-parse": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/jsdoc-parse/-/jsdoc-parse-3.0.0.tgz",
+ "integrity": "sha1-JxUx2I8Z3yUgsWMqf2yYlEGof94=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "lodash.omit": "4.5.0",
+ "lodash.pick": "4.4.0",
+ "reduce-extract": "1.0.0",
+ "sort-array": "1.1.2",
+ "test-value": "2.1.0"
+ }
+ },
+ "jsdoc-to-markdown": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/jsdoc-to-markdown/-/jsdoc-to-markdown-3.0.0.tgz",
+ "integrity": "sha1-zIqU8fQSrB2kusFldHWwl17oFho=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "command-line-tool": "0.7.0",
+ "config-master": "3.1.0",
+ "dmd": "3.0.6",
+ "jsdoc-api": "3.0.0",
+ "jsdoc-parse": "3.0.0",
+ "jsdoc2md-stats": "2.0.1",
+ "walk-back": "2.0.1"
+ }
+ },
+ "jsdoc2md-stats": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/jsdoc2md-stats/-/jsdoc2md-stats-2.0.1.tgz",
+ "integrity": "sha1-vYNDc0z+aeqAUKF5MSUSk/DZBHs=",
+ "dev": true,
+ "requires": {
+ "app-usage-stats": "0.5.1"
+ }
+ },
"json-schema": {
- "version": "https://registry.npmjs.org/json-schema/-/json-schema-0.2.3.tgz",
+ "version": "0.2.3",
+ "resolved": "https://registry.npmjs.org/json-schema/-/json-schema-0.2.3.tgz",
"integrity": "sha1-tIDIkuWaLwWVTOcnvT8qTogvnhM="
},
+ "json-stable-stringify": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/json-stable-stringify/-/json-stable-stringify-1.0.1.tgz",
+ "integrity": "sha1-mnWdOcXy/1A/1TAGRu1EX4jE+a8=",
+ "optional": true,
+ "requires": {
+ "jsonify": "0.0.0"
+ }
+ },
+ "json-stringify-safe": {
+ "version": "5.0.1",
+ "resolved": "https://registry.npmjs.org/json-stringify-safe/-/json-stringify-safe-5.0.1.tgz",
+ "integrity": "sha1-Epai1Y/UXxmg9s4B1lcB4sc1tus=",
+ "optional": true
+ },
+ "jsonify": {
+ "version": "0.0.0",
+ "resolved": "https://registry.npmjs.org/jsonify/-/jsonify-0.0.0.tgz",
+ "integrity": "sha1-LHS27kHZPKUbe1qu6PUDYx0lKnM=",
+ "optional": true
+ },
"jsprim": {
- "version": "https://registry.npmjs.org/jsprim/-/jsprim-1.4.1.tgz",
+ "version": "1.4.1",
+ "resolved": "https://registry.npmjs.org/jsprim/-/jsprim-1.4.1.tgz",
"integrity": "sha1-MT5mvB5cwG5Di8G3SZwuXFastqI=",
"requires": {
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz",
- "extsprintf": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.3.0.tgz",
- "json-schema": "https://registry.npmjs.org/json-schema/-/json-schema-0.2.3.tgz",
- "verror": "https://registry.npmjs.org/verror/-/verror-1.10.0.tgz"
+ "assert-plus": "1.0.0",
+ "extsprintf": "1.3.0",
+ "json-schema": "0.2.3",
+ "verror": "1.10.0"
+ }
+ },
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ },
+ "klaw": {
+ "version": "1.3.1",
+ "resolved": "https://registry.npmjs.org/klaw/-/klaw-1.3.1.tgz",
+ "integrity": "sha1-QIhDO0azsbolnXh4XY6W9zugJDk=",
+ "dev": true,
+ "requires": {
+ "graceful-fs": "4.1.11"
+ }
+ },
+ "lazy-cache": {
+ "version": "2.0.2",
+ "resolved": "https://registry.npmjs.org/lazy-cache/-/lazy-cache-2.0.2.tgz",
+ "integrity": "sha1-uRkKT5EzVGlIQIWfio9whNiCImQ=",
+ "dev": true,
+ "requires": {
+ "set-getter": "0.1.0"
}
},
"lodash": {
- "version": "https://registry.npmjs.org/lodash/-/lodash-4.17.4.tgz",
+ "version": "4.17.4",
+ "resolved": "https://registry.npmjs.org/lodash/-/lodash-4.17.4.tgz",
"integrity": "sha1-eCA6TRwyiuHYbcpkYONptX9AVa4="
},
"lodash.get": {
- "version": "https://registry.npmjs.org/lodash.get/-/lodash.get-4.4.2.tgz",
+ "version": "4.4.2",
+ "resolved": "https://registry.npmjs.org/lodash.get/-/lodash.get-4.4.2.tgz",
"integrity": "sha1-LRd/ZS+jHpObRDjVNBSZ36OCXpk="
},
+ "lodash.omit": {
+ "version": "4.5.0",
+ "resolved": "https://registry.npmjs.org/lodash.omit/-/lodash.omit-4.5.0.tgz",
+ "integrity": "sha1-brGa5aHuHdnfC5aeZs4Lf6MLXmA=",
+ "dev": true
+ },
+ "lodash.padend": {
+ "version": "4.6.1",
+ "resolved": "https://registry.npmjs.org/lodash.padend/-/lodash.padend-4.6.1.tgz",
+ "integrity": "sha1-U8y6BH0G4VjTEfRdpiX05J5vFm4=",
+ "dev": true
+ },
+ "lodash.pick": {
+ "version": "4.4.0",
+ "resolved": "https://registry.npmjs.org/lodash.pick/-/lodash.pick-4.4.0.tgz",
+ "integrity": "sha1-UvBWEP/53tQiYRRB7R/BI6AwAbM=",
+ "dev": true
+ },
"lru-cache": {
- "version": "https://registry.npmjs.org/lru-cache/-/lru-cache-4.1.1.tgz",
- "integrity": "sha1-Yi4y6CSItJJ5EUpPns9F581rulU=",
+ "version": "4.1.1",
+ "resolved": "https://registry.npmjs.org/lru-cache/-/lru-cache-4.1.1.tgz",
+ "integrity": "sha512-q4spe4KTfsAS1SUHLO0wz8Qiyf1+vMIAgpRYioFYDMNqKfHQbg+AVDH3i4fvpl71/P1L0dBl+fQi+P37UYf0ew==",
"requires": {
- "pseudomap": "https://registry.npmjs.org/pseudomap/-/pseudomap-1.0.2.tgz",
- "yallist": "https://registry.npmjs.org/yallist/-/yallist-2.1.2.tgz"
+ "pseudomap": "1.0.2",
+ "yallist": "2.1.2"
+ }
+ },
+ "map-cache": {
+ "version": "0.2.2",
+ "resolved": "https://registry.npmjs.org/map-cache/-/map-cache-0.2.2.tgz",
+ "integrity": "sha1-wyq9C9ZSXZsFFkW7TyasXcmKDb8=",
+ "dev": true
+ },
+ "map-visit": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/map-visit/-/map-visit-1.0.0.tgz",
+ "integrity": "sha1-7Nyo8TFE5mDxtb1B8S80edmN+48=",
+ "dev": true,
+ "requires": {
+ "object-visit": "1.0.1"
+ }
+ },
+ "marked": {
+ "version": "0.3.6",
+ "resolved": "https://registry.npmjs.org/marked/-/marked-0.3.6.tgz",
+ "integrity": "sha1-ssbGGPzOzk74bE/Gy4p8v1rtqNc=",
+ "dev": true
+ },
+ "matcher-collection": {
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/matcher-collection/-/matcher-collection-1.0.5.tgz",
+ "integrity": "sha512-nUCmzKipcJEwYsBVAFh5P+d7JBuhJaW1xs85Hara9xuMLqtCVUrW6DSC0JVIkluxEH2W45nPBM/wjHtBXa/tYA==",
+ "dev": true,
+ "requires": {
+ "minimatch": "3.0.4"
+ }
+ },
+ "micromatch": {
+ "version": "2.3.11",
+ "resolved": "https://registry.npmjs.org/micromatch/-/micromatch-2.3.11.tgz",
+ "integrity": "sha1-hmd8l9FyCzY0MdBNDRUpO9OMFWU=",
+ "dev": true,
+ "requires": {
+ "arr-diff": "2.0.0",
+ "array-unique": "0.2.1",
+ "braces": "1.8.5",
+ "expand-brackets": "0.1.5",
+ "extglob": "0.3.2",
+ "filename-regex": "2.0.1",
+ "is-extglob": "1.0.0",
+ "is-glob": "2.0.1",
+ "kind-of": "3.2.2",
+ "normalize-path": "2.1.1",
+ "object.omit": "2.0.1",
+ "parse-glob": "3.0.4",
+ "regex-cache": "0.4.4"
}
},
"mime": {
- "version": "https://registry.npmjs.org/mime/-/mime-1.3.6.tgz",
+ "version": "1.3.6",
+ "resolved": "https://registry.npmjs.org/mime/-/mime-1.3.6.tgz",
"integrity": "sha1-WR2E02U6awtKO5343lqoEI5y5eA="
},
+ "mime-db": {
+ "version": "1.30.0",
+ "resolved": "https://registry.npmjs.org/mime-db/-/mime-db-1.30.0.tgz",
+ "integrity": "sha1-dMZD2i3Z1qRTmZY0ZbJtXKfXHwE="
+ },
+ "mime-types": {
+ "version": "2.1.17",
+ "resolved": "https://registry.npmjs.org/mime-types/-/mime-types-2.1.17.tgz",
+ "integrity": "sha1-Cdejk/A+mVp5+K+Fe3Cp4KsWVXo=",
+ "requires": {
+ "mime-db": "1.30.0"
+ }
+ },
"minimalistic-assert": {
- "version": "https://registry.npmjs.org/minimalistic-assert/-/minimalistic-assert-1.0.0.tgz",
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/minimalistic-assert/-/minimalistic-assert-1.0.0.tgz",
"integrity": "sha1-cCvi3aazf0g2vLP121ZkG2Sh09M="
},
"minimatch": {
- "version": "https://registry.npmjs.org/minimatch/-/minimatch-3.0.4.tgz",
- "integrity": "sha1-UWbihkV/AzBgZL5Ul+jbsMPTIIM=",
- "optional": true,
+ "version": "3.0.4",
+ "resolved": "https://registry.npmjs.org/minimatch/-/minimatch-3.0.4.tgz",
+ "integrity": "sha512-yJHVQEhyqPLUTgt9B83PXu6W3rx4MvvHvSUvToogpwoGDOUQ+yDrR0HRot+yOCdCO7u4hX3pWft6kWBBcqh0UA==",
"requires": {
- "brace-expansion": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.8.tgz"
+ "brace-expansion": "1.1.8"
}
},
"minimist": {
- "version": "https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz",
- "integrity": "sha1-hX/Kv8M5fSYluCKCYuhqp6ARsF0=",
- "optional": true
+ "version": "0.0.8",
+ "resolved": "https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz",
+ "integrity": "sha1-hX/Kv8M5fSYluCKCYuhqp6ARsF0="
},
- "mkdirp": {
- "version": "https://registry.npmjs.org/mkdirp/-/mkdirp-0.5.1.tgz",
- "integrity": "sha1-MAV0OOrGz3+MR2fzhkjWaX11yQM=",
- "optional": true,
+ "mixin-deep": {
+ "version": "1.3.1",
+ "resolved": "https://registry.npmjs.org/mixin-deep/-/mixin-deep-1.3.1.tgz",
+ "integrity": "sha512-8ZItLHeEgaqEvd5lYBXfm4EZSFCX29Jb9K+lAHhDKzReKBQKj3R+7NOF6tjqYi9t4oI8VUfaWITJQm86wnXGNQ==",
+ "dev": true,
"requires": {
- "minimist": "https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz"
+ "for-in": "1.0.2",
+ "is-extendable": "1.0.1"
+ },
+ "dependencies": {
+ "is-extendable": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/is-extendable/-/is-extendable-1.0.1.tgz",
+ "integrity": "sha512-arnXMxT1hhoKo9k1LZdmlNyJdDDfy2v0fXjFlmok4+i8ul/6WlbVge9bhM74OpNPQPMGUToDtz+KXa1PneJxOA==",
+ "dev": true,
+ "requires": {
+ "is-plain-object": "2.0.4"
+ }
+ }
}
},
+ "mkdirp": {
+ "version": "0.5.1",
+ "resolved": "https://registry.npmjs.org/mkdirp/-/mkdirp-0.5.1.tgz",
+ "integrity": "sha1-MAV0OOrGz3+MR2fzhkjWaX11yQM=",
+ "requires": {
+ "minimist": "0.0.8"
+ }
+ },
+ "mkdirp2": {
+ "version": "1.0.3",
+ "resolved": "https://registry.npmjs.org/mkdirp2/-/mkdirp2-1.0.3.tgz",
+ "integrity": "sha1-zI3YJl8fBuLY9bELblL04FC+0hs=",
+ "dev": true
+ },
"moment": {
- "version": "https://registry.npmjs.org/moment/-/moment-2.18.1.tgz",
+ "version": "2.18.1",
+ "resolved": "https://registry.npmjs.org/moment/-/moment-2.18.1.tgz",
"integrity": "sha1-w2GT3Tzhwu7SrbfIAtu8d6gbHA8="
},
"moment-timezone": {
@@ -352,191 +3052,1825 @@
"resolved": "https://registry.npmjs.org/moment-timezone/-/moment-timezone-0.5.13.tgz",
"integrity": "sha1-mc5cfYJyYusPH3AgRBd/YHRde5A=",
"requires": {
- "moment": "https://registry.npmjs.org/moment/-/moment-2.18.1.tgz"
+ "moment": "2.18.1"
}
},
"ms": {
- "version": "https://registry.npmjs.org/ms/-/ms-2.0.0.tgz",
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/ms/-/ms-2.0.0.tgz",
"integrity": "sha1-VgiurfwAvmwpAd9fmGF4jeDVl8g="
},
"mv": {
- "version": "https://registry.npmjs.org/mv/-/mv-2.1.1.tgz",
+ "version": "2.1.1",
+ "resolved": "https://registry.npmjs.org/mv/-/mv-2.1.1.tgz",
"integrity": "sha1-rmzg1vbV4KT32JN5jQPB6pVZtqI=",
"optional": true,
"requires": {
- "mkdirp": "https://registry.npmjs.org/mkdirp/-/mkdirp-0.5.1.tgz",
- "ncp": "https://registry.npmjs.org/ncp/-/ncp-2.0.0.tgz",
- "rimraf": "https://registry.npmjs.org/rimraf/-/rimraf-2.4.5.tgz"
+ "mkdirp": "0.5.1",
+ "ncp": "2.0.0",
+ "rimraf": "2.4.5"
}
},
"nan": {
- "version": "https://registry.npmjs.org/nan/-/nan-2.6.2.tgz",
- "integrity": "sha1-5P805slf37WuzAjeZZb0NgWn20U=",
- "optional": true
+ "version": "2.6.2",
+ "resolved": "https://registry.npmjs.org/nan/-/nan-2.6.2.tgz",
+ "integrity": "sha1-5P805slf37WuzAjeZZb0NgWn20U="
+ },
+ "nanomatch": {
+ "version": "1.2.7",
+ "resolved": "https://registry.npmjs.org/nanomatch/-/nanomatch-1.2.7.tgz",
+ "integrity": "sha512-/5ldsnyurvEw7wNpxLFgjVvBLMta43niEYOy0CJ4ntcYSbx6bugRUTQeFb4BR/WanEL1o3aQgHuVLHQaB6tOqg==",
+ "dev": true,
+ "requires": {
+ "arr-diff": "4.0.0",
+ "array-unique": "0.3.2",
+ "define-property": "1.0.0",
+ "extend-shallow": "2.0.1",
+ "fragment-cache": "0.2.1",
+ "is-odd": "1.0.0",
+ "kind-of": "5.1.0",
+ "object.pick": "1.3.0",
+ "regex-not": "1.0.0",
+ "snapdragon": "0.8.1",
+ "to-regex": "3.0.1"
+ },
+ "dependencies": {
+ "arr-diff": {
+ "version": "4.0.0",
+ "resolved": "https://registry.npmjs.org/arr-diff/-/arr-diff-4.0.0.tgz",
+ "integrity": "sha1-1kYQdP6/7HHn4VI1dhoyml3HxSA=",
+ "dev": true
+ },
+ "array-unique": {
+ "version": "0.3.2",
+ "resolved": "https://registry.npmjs.org/array-unique/-/array-unique-0.3.2.tgz",
+ "integrity": "sha1-qJS3XUvE9s1nnvMkSp/Y9Gri1Cg=",
+ "dev": true
+ },
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ }
+ }
},
"ncp": {
- "version": "https://registry.npmjs.org/ncp/-/ncp-2.0.0.tgz",
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/ncp/-/ncp-2.0.0.tgz",
"integrity": "sha1-GVoh1sRuNh0vsSgbo4uR6d9727M=",
"optional": true
},
"negotiator": {
- "version": "https://registry.npmjs.org/negotiator/-/negotiator-0.6.1.tgz",
+ "version": "0.6.1",
+ "resolved": "https://registry.npmjs.org/negotiator/-/negotiator-0.6.1.tgz",
"integrity": "sha1-KzJxhOiZIQEXeyhWP7XnECrNDKk="
},
"node-ipc": {
- "version": "https://registry.npmjs.org/node-ipc/-/node-ipc-9.1.0.tgz",
- "integrity": "sha1-rZd4NmcWX1lE6kHPBmGPHEvheSo=",
+ "version": "9.1.1",
+ "resolved": "https://registry.npmjs.org/node-ipc/-/node-ipc-9.1.1.tgz",
+ "integrity": "sha512-FAyICv0sIRJxVp3GW5fzgaf9jwwRQxAKDJlmNFUL5hOy+W4X/I5AypyHoq0DXXbo9o/gt79gj++4cMr4jVWE/w==",
"requires": {
- "event-pubsub": "https://registry.npmjs.org/event-pubsub/-/event-pubsub-4.2.4.tgz",
- "js-message": "https://registry.npmjs.org/js-message/-/js-message-1.0.5.tgz",
- "js-queue": "https://registry.npmjs.org/js-queue/-/js-queue-2.0.0.tgz"
+ "event-pubsub": "4.3.0",
+ "js-message": "1.0.5",
+ "js-queue": "2.0.0"
}
},
- "obuf": {
- "version": "https://registry.npmjs.org/obuf/-/obuf-1.1.1.tgz",
- "integrity": "sha1-EEEktsYCxnlogaBCVB0220OlJk4="
- },
- "once": {
- "version": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
- "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=",
+ "node-persist": {
+ "version": "2.1.0",
+ "resolved": "https://registry.npmjs.org/node-persist/-/node-persist-2.1.0.tgz",
+ "integrity": "sha1-5lK784haBNrWo1PXQXYXfIORRwc=",
"requires": {
- "wrappy": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz"
+ "is-absolute": "0.2.6",
+ "mkdirp": "0.5.1",
+ "q": "1.1.2"
}
},
- "path-is-absolute": {
- "version": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz",
- "integrity": "sha1-F0uSaHNVNP+8es5r9TpanhtcX18=",
- "optional": true
- },
- "process-nextick-args": {
- "version": "https://registry.npmjs.org/process-nextick-args/-/process-nextick-args-1.0.7.tgz",
- "integrity": "sha1-FQ4gt1ZZCtP5EJPyWk8q2L/zC6M="
- },
- "pseudomap": {
- "version": "https://registry.npmjs.org/pseudomap/-/pseudomap-1.0.2.tgz",
- "integrity": "sha1-8FKijacOYYkX7wqKw0wa5aaChrM="
- },
- "qs": {
- "version": "https://registry.npmjs.org/qs/-/qs-6.5.0.tgz",
- "integrity": "sha1-jQSVTTZN7z78VbWgeT4eLIsebkk="
- },
- "readable-stream": {
- "version": "https://registry.npmjs.org/readable-stream/-/readable-stream-2.3.3.tgz",
- "integrity": "sha1-No8lEtefnUb9/HE0mueHi7weuVw=",
+ "node-pre-gyp": {
+ "version": "0.6.39",
+ "resolved": "https://registry.npmjs.org/node-pre-gyp/-/node-pre-gyp-0.6.39.tgz",
+ "integrity": "sha512-OsJV74qxnvz/AMGgcfZoDaeDXKD3oY3QVIbBmwszTFkRisTSXbMQyn4UWzUMOtA5SVhrBZOTp0wcoSBgfMfMmQ==",
+ "optional": true,
"requires": {
- "core-util-is": "https://registry.npmjs.org/core-util-is/-/core-util-is-1.0.2.tgz",
- "inherits": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz",
- "isarray": "https://registry.npmjs.org/isarray/-/isarray-1.0.0.tgz",
- "process-nextick-args": "https://registry.npmjs.org/process-nextick-args/-/process-nextick-args-1.0.7.tgz",
- "safe-buffer": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.1.tgz",
- "string_decoder": "https://registry.npmjs.org/string_decoder/-/string_decoder-1.0.3.tgz",
- "util-deprecate": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz"
- }
- },
- "restify": {
- "version": "https://registry.npmjs.org/restify/-/restify-5.2.0.tgz",
- "integrity": "sha1-9xMxAu85WKVtpC92BBURKnigGCI=",
- "requires": {
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz",
- "bunyan": "https://registry.npmjs.org/bunyan/-/bunyan-1.8.12.tgz",
- "clone-regexp": "https://registry.npmjs.org/clone-regexp/-/clone-regexp-1.0.0.tgz",
- "csv": "https://registry.npmjs.org/csv/-/csv-1.1.1.tgz",
- "dtrace-provider": "https://registry.npmjs.org/dtrace-provider/-/dtrace-provider-0.8.5.tgz",
- "escape-regexp-component": "https://registry.npmjs.org/escape-regexp-component/-/escape-regexp-component-1.0.2.tgz",
- "formidable": "https://registry.npmjs.org/formidable/-/formidable-1.1.1.tgz",
- "http-signature": "https://registry.npmjs.org/http-signature/-/http-signature-1.1.1.tgz",
- "lodash": "https://registry.npmjs.org/lodash/-/lodash-4.17.4.tgz",
- "lru-cache": "https://registry.npmjs.org/lru-cache/-/lru-cache-4.1.1.tgz",
- "mime": "https://registry.npmjs.org/mime/-/mime-1.3.6.tgz",
- "negotiator": "https://registry.npmjs.org/negotiator/-/negotiator-0.6.1.tgz",
- "once": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
- "qs": "https://registry.npmjs.org/qs/-/qs-6.5.0.tgz",
- "restify-errors": "https://registry.npmjs.org/restify-errors/-/restify-errors-4.3.0.tgz",
- "semver": "https://registry.npmjs.org/semver/-/semver-5.4.1.tgz",
- "spdy": "https://registry.npmjs.org/spdy/-/spdy-3.4.7.tgz",
- "uuid": "https://registry.npmjs.org/uuid/-/uuid-3.1.0.tgz",
- "vasync": "https://registry.npmjs.org/vasync/-/vasync-1.6.4.tgz",
- "verror": "https://registry.npmjs.org/verror/-/verror-1.10.0.tgz"
+ "detect-libc": "1.0.3",
+ "hawk": "3.1.3",
+ "mkdirp": "0.5.1",
+ "nopt": "4.0.1",
+ "npmlog": "4.1.2",
+ "rc": "1.2.2",
+ "request": "2.81.0",
+ "rimraf": "2.6.2",
+ "semver": "5.4.1",
+ "tar": "2.2.1",
+ "tar-pack": "3.4.1"
},
"dependencies": {
- "uuid": {
- "version": "https://registry.npmjs.org/uuid/-/uuid-3.1.0.tgz",
- "integrity": "sha1-PdPT55Crwk17DToDT/q6vijrvAQ="
+ "glob": {
+ "version": "7.1.2",
+ "resolved": "https://registry.npmjs.org/glob/-/glob-7.1.2.tgz",
+ "integrity": "sha512-MJTUg1kjuLeQCJ+ccE4Vpa6kKVXkPYJ2mOCQyUuKLcLQsdrMCpBPUi8qVE6+YuaJkozeA9NusTAw3hLr8Xe5EQ==",
+ "optional": true,
+ "requires": {
+ "fs.realpath": "1.0.0",
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
+ },
+ "rimraf": {
+ "version": "2.6.2",
+ "resolved": "https://registry.npmjs.org/rimraf/-/rimraf-2.6.2.tgz",
+ "integrity": "sha512-lreewLK/BlghmxtfH36YYVg1i8IAce4TI7oao75I1g245+6BctqTVQiBP3YUJ9C6DQOXJmkYR9X9fCLtCOJc5w==",
+ "optional": true,
+ "requires": {
+ "glob": "7.1.2"
+ }
}
}
},
+ "nopt": {
+ "version": "4.0.1",
+ "resolved": "https://registry.npmjs.org/nopt/-/nopt-4.0.1.tgz",
+ "integrity": "sha1-0NRoWv1UFRk8jHUFYC0NF81kR00=",
+ "optional": true,
+ "requires": {
+ "abbrev": "1.1.1",
+ "osenv": "0.1.4"
+ }
+ },
+ "normalize-path": {
+ "version": "2.1.1",
+ "resolved": "https://registry.npmjs.org/normalize-path/-/normalize-path-2.1.1.tgz",
+ "integrity": "sha1-GrKLVW4Zg2Oowab35vogE3/mrtk=",
+ "dev": true,
+ "requires": {
+ "remove-trailing-separator": "1.1.0"
+ }
+ },
+ "npmlog": {
+ "version": "4.1.2",
+ "resolved": "https://registry.npmjs.org/npmlog/-/npmlog-4.1.2.tgz",
+ "integrity": "sha512-2uUqazuKlTaSI/dC8AzicUck7+IrEaOnN/e0jd3Xtt1KcGpwx30v50mL7oPyr/h9bL3E4aZccVwpwP+5W9Vjkg==",
+ "optional": true,
+ "requires": {
+ "are-we-there-yet": "1.1.4",
+ "console-control-strings": "1.1.0",
+ "gauge": "2.7.4",
+ "set-blocking": "2.0.0"
+ }
+ },
+ "number-is-nan": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/number-is-nan/-/number-is-nan-1.0.1.tgz",
+ "integrity": "sha1-CXtgK1NCKlIsGvuHkDGDNpQaAR0="
+ },
+ "oauth-sign": {
+ "version": "0.8.2",
+ "resolved": "https://registry.npmjs.org/oauth-sign/-/oauth-sign-0.8.2.tgz",
+ "integrity": "sha1-Rqarfwrq2N6unsBWV4C31O/rnUM=",
+ "optional": true
+ },
+ "object-assign": {
+ "version": "4.1.1",
+ "resolved": "https://registry.npmjs.org/object-assign/-/object-assign-4.1.1.tgz",
+ "integrity": "sha1-IQmtx5ZYh8/AXLvUQsrIv7s2CGM=",
+ "optional": true
+ },
+ "object-copy": {
+ "version": "0.1.0",
+ "resolved": "https://registry.npmjs.org/object-copy/-/object-copy-0.1.0.tgz",
+ "integrity": "sha1-fn2Fi3gb18mRpBupde04EnVOmYw=",
+ "dev": true,
+ "requires": {
+ "copy-descriptor": "0.1.1",
+ "define-property": "0.2.5",
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "define-property": {
+ "version": "0.2.5",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-0.2.5.tgz",
+ "integrity": "sha1-w1se+RjsPJkPmlvFe+BKrOxcgRY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "0.1.6"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-0.1.6.tgz",
+ "integrity": "sha1-qeEss66Nh2cn7u84Q/igiXtcmNY=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ }
+ },
+ "is-data-descriptor": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-0.1.4.tgz",
+ "integrity": "sha1-C17mSDiOLIYCgueT8YVv7D8wG1Y=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ }
+ },
+ "is-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-0.1.6.tgz",
+ "integrity": "sha512-avDYr0SB3DwO9zsMov0gKCESFYqCnE4hq/4z3TdUlukEy5t9C0YRq7HLrsN52NAcqXKaepeCD0n+B0arnVG3Hg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "0.1.6",
+ "is-data-descriptor": "0.1.4",
+ "kind-of": "5.1.0"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ }
+ }
+ }
+ }
+ },
+ "object-get": {
+ "version": "2.1.0",
+ "resolved": "https://registry.npmjs.org/object-get/-/object-get-2.1.0.tgz",
+ "integrity": "sha1-ciu9tgA576R8rTxtws5RqFwCxa4=",
+ "dev": true
+ },
+ "object-to-spawn-args": {
+ "version": "1.1.1",
+ "resolved": "https://registry.npmjs.org/object-to-spawn-args/-/object-to-spawn-args-1.1.1.tgz",
+ "integrity": "sha1-d9qIJ/Bz0BHJ4bFz+JV4FHAkZ4U=",
+ "dev": true
+ },
+ "object-visit": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/object-visit/-/object-visit-1.0.1.tgz",
+ "integrity": "sha1-95xEk68MU3e1n+OdOV5BBC3QRbs=",
+ "dev": true,
+ "requires": {
+ "isobject": "3.0.1"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
+ "object.omit": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/object.omit/-/object.omit-2.0.1.tgz",
+ "integrity": "sha1-Gpx0SCnznbuFjHbKNXmuKlTr0fo=",
+ "dev": true,
+ "requires": {
+ "for-own": "0.1.5",
+ "is-extendable": "0.1.1"
+ }
+ },
+ "object.pick": {
+ "version": "1.3.0",
+ "resolved": "https://registry.npmjs.org/object.pick/-/object.pick-1.3.0.tgz",
+ "integrity": "sha1-h6EKxMFpS9Lhy/U1kaZhQftd10c=",
+ "dev": true,
+ "requires": {
+ "isobject": "3.0.1"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
+ "obuf": {
+ "version": "1.1.1",
+ "resolved": "https://registry.npmjs.org/obuf/-/obuf-1.1.1.tgz",
+ "integrity": "sha1-EEEktsYCxnlogaBCVB0220OlJk4="
+ },
+ "once": {
+ "version": "1.4.0",
+ "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz",
+ "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=",
+ "requires": {
+ "wrappy": "1.0.2"
+ }
+ },
+ "onoff": {
+ "version": "1.1.7",
+ "resolved": "https://registry.npmjs.org/onoff/-/onoff-1.1.7.tgz",
+ "integrity": "sha1-kZKHlby16QL+dVG9e7JVHZunZII=",
+ "requires": {
+ "epoll": "0.1.22"
+ }
+ },
+ "optimist": {
+ "version": "0.6.1",
+ "resolved": "https://registry.npmjs.org/optimist/-/optimist-0.6.1.tgz",
+ "integrity": "sha1-2j6nRob6IaGaERwybpDrFaAZZoY=",
+ "dev": true,
+ "requires": {
+ "minimist": "0.0.8",
+ "wordwrap": "0.0.3"
+ }
+ },
+ "os-homedir": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/os-homedir/-/os-homedir-1.0.2.tgz",
+ "integrity": "sha1-/7xJiDNuDoM94MFox+8VISGqf7M=",
+ "optional": true
+ },
+ "os-tmpdir": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/os-tmpdir/-/os-tmpdir-1.0.2.tgz",
+ "integrity": "sha1-u+Z0BseaqFxc/sdm/lc0VV36EnQ=",
+ "optional": true
+ },
+ "osenv": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/osenv/-/osenv-0.1.4.tgz",
+ "integrity": "sha1-Qv5tWVPfBsgGS+bxdsPQWqqjRkQ=",
+ "optional": true,
+ "requires": {
+ "os-homedir": "1.0.2",
+ "os-tmpdir": "1.0.2"
+ }
+ },
+ "parse-glob": {
+ "version": "3.0.4",
+ "resolved": "https://registry.npmjs.org/parse-glob/-/parse-glob-3.0.4.tgz",
+ "integrity": "sha1-ssN2z7EfNVE7rdFz7wu246OIORw=",
+ "dev": true,
+ "requires": {
+ "glob-base": "0.3.0",
+ "is-dotfile": "1.0.3",
+ "is-extglob": "1.0.0",
+ "is-glob": "2.0.1"
+ }
+ },
+ "parse-passwd": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/parse-passwd/-/parse-passwd-1.0.0.tgz",
+ "integrity": "sha1-bVuTSkVpk7I9N/QKOC1vFmao5cY=",
+ "dev": true
+ },
+ "pascalcase": {
+ "version": "0.1.1",
+ "resolved": "https://registry.npmjs.org/pascalcase/-/pascalcase-0.1.1.tgz",
+ "integrity": "sha1-s2PlXoAGym/iF4TS2yK9FdeRfxQ=",
+ "dev": true
+ },
+ "path-is-absolute": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz",
+ "integrity": "sha1-F0uSaHNVNP+8es5r9TpanhtcX18="
+ },
+ "path-parse": {
+ "version": "1.0.5",
+ "resolved": "https://registry.npmjs.org/path-parse/-/path-parse-1.0.5.tgz",
+ "integrity": "sha1-PBrfhx6pzWyUMbbqK9dKD/BVxME=",
+ "dev": true
+ },
+ "performance-now": {
+ "version": "0.2.0",
+ "resolved": "https://registry.npmjs.org/performance-now/-/performance-now-0.2.0.tgz",
+ "integrity": "sha1-M+8wxcd9TqIcWlOGnZG1bY8lVeU=",
+ "optional": true
+ },
+ "posix-character-classes": {
+ "version": "0.1.1",
+ "resolved": "https://registry.npmjs.org/posix-character-classes/-/posix-character-classes-0.1.1.tgz",
+ "integrity": "sha1-AerA/jta9xoqbAL+q7jB/vfgDqs=",
+ "dev": true
+ },
+ "preserve": {
+ "version": "0.2.0",
+ "resolved": "https://registry.npmjs.org/preserve/-/preserve-0.2.0.tgz",
+ "integrity": "sha1-gV7R9uvGWSb4ZbMQwHE7yzMVzks=",
+ "dev": true
+ },
+ "process-nextick-args": {
+ "version": "1.0.7",
+ "resolved": "https://registry.npmjs.org/process-nextick-args/-/process-nextick-args-1.0.7.tgz",
+ "integrity": "sha1-FQ4gt1ZZCtP5EJPyWk8q2L/zC6M="
+ },
+ "pseudomap": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/pseudomap/-/pseudomap-1.0.2.tgz",
+ "integrity": "sha1-8FKijacOYYkX7wqKw0wa5aaChrM="
+ },
+ "punycode": {
+ "version": "1.4.1",
+ "resolved": "https://registry.npmjs.org/punycode/-/punycode-1.4.1.tgz",
+ "integrity": "sha1-wNWmOycYgArY4esPpSachN1BhF4=",
+ "optional": true
+ },
+ "q": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/q/-/q-1.1.2.tgz",
+ "integrity": "sha1-Y1fikSBnAdmfGXq4TlforRlvKok="
+ },
+ "qs": {
+ "version": "6.5.0",
+ "resolved": "https://registry.npmjs.org/qs/-/qs-6.5.0.tgz",
+ "integrity": "sha512-fjVFjW9yhqMhVGwRExCXLhJKrLlkYSaxNWdyc9rmHlrVZbk35YHH312dFd7191uQeXkI3mKLZTIbSvIeFwFemg=="
+ },
+ "qunit": {
+ "version": "2.5.0",
+ "resolved": "https://registry.npmjs.org/qunit/-/qunit-2.5.0.tgz",
+ "integrity": "sha512-GVvRr8ISFMs4SkTWFsaUzMBs7QEuiXVT4orlFgyHkmeXO1ijlDkhW6ecPri4urXiE4BUXEULJAtFlV1MWgg4Uw==",
+ "dev": true,
+ "requires": {
+ "chokidar": "1.7.0",
+ "commander": "2.12.2",
+ "exists-stat": "1.0.0",
+ "findup-sync": "2.0.0",
+ "js-reporters": "1.2.1",
+ "resolve": "1.5.0",
+ "shelljs": "0.2.6",
+ "walk-sync": "0.3.2"
+ }
+ },
+ "randomatic": {
+ "version": "1.1.7",
+ "resolved": "https://registry.npmjs.org/randomatic/-/randomatic-1.1.7.tgz",
+ "integrity": "sha512-D5JUjPyJbaJDkuAazpVnSfVkLlpeO3wDlPROTMLGKG1zMFNFRgrciKo1ltz/AzNTkqE0HzDx655QOL51N06how==",
+ "dev": true,
+ "requires": {
+ "is-number": "3.0.0",
+ "kind-of": "4.0.0"
+ },
+ "dependencies": {
+ "is-number": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/is-number/-/is-number-3.0.0.tgz",
+ "integrity": "sha1-JP1iAaR4LPUFYcgQJ2r8fRLXEZU=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "kind-of": {
+ "version": "4.0.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-4.0.0.tgz",
+ "integrity": "sha1-IIE989cSkosgc3hpGkUGb65y3Vc=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "rc": {
+ "version": "1.2.2",
+ "resolved": "https://registry.npmjs.org/rc/-/rc-1.2.2.tgz",
+ "integrity": "sha1-2M6ctX6NZNnHut2YdsfDTL48cHc=",
+ "optional": true,
+ "requires": {
+ "deep-extend": "0.4.2",
+ "ini": "1.3.5",
+ "minimist": "1.2.0",
+ "strip-json-comments": "2.0.1"
+ },
+ "dependencies": {
+ "deep-extend": {
+ "version": "0.4.2",
+ "resolved": "https://registry.npmjs.org/deep-extend/-/deep-extend-0.4.2.tgz",
+ "integrity": "sha1-SLaZwn4zS/ifEIkr5DL25MfTSn8=",
+ "optional": true
+ },
+ "minimist": {
+ "version": "1.2.0",
+ "resolved": "https://registry.npmjs.org/minimist/-/minimist-1.2.0.tgz",
+ "integrity": "sha1-o1AIsg9BOD7sH7kU9M1d95omQoQ=",
+ "optional": true
+ }
+ }
+ },
+ "readable-stream": {
+ "version": "2.3.3",
+ "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-2.3.3.tgz",
+ "integrity": "sha512-m+qzzcn7KUxEmd1gMbchF+Y2eIUbieUaxkWtptyHywrX0rE8QEYqPC07Vuy4Wm32/xE16NcdBctb8S0Xe/5IeQ==",
+ "requires": {
+ "core-util-is": "1.0.2",
+ "inherits": "2.0.3",
+ "isarray": "1.0.0",
+ "process-nextick-args": "1.0.7",
+ "safe-buffer": "5.1.1",
+ "string_decoder": "1.0.3",
+ "util-deprecate": "1.0.2"
+ }
+ },
+ "readdirp": {
+ "version": "2.1.0",
+ "resolved": "https://registry.npmjs.org/readdirp/-/readdirp-2.1.0.tgz",
+ "integrity": "sha1-TtCtBg3zBzMAxIRANz9y0cxkLXg=",
+ "dev": true,
+ "requires": {
+ "graceful-fs": "4.1.11",
+ "minimatch": "3.0.4",
+ "readable-stream": "2.3.3",
+ "set-immediate-shim": "1.0.1"
+ }
+ },
+ "reduce-extract": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/reduce-extract/-/reduce-extract-1.0.0.tgz",
+ "integrity": "sha1-Z/I4W+2mUGG19fQxJmLosIDKFSU=",
+ "dev": true,
+ "requires": {
+ "test-value": "1.1.0"
+ },
+ "dependencies": {
+ "test-value": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/test-value/-/test-value-1.1.0.tgz",
+ "integrity": "sha1-oJE29y7AQ9J8iTcHwrFZv6196T8=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "typical": "2.6.1"
+ }
+ }
+ }
+ },
+ "reduce-flatten": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/reduce-flatten/-/reduce-flatten-1.0.1.tgz",
+ "integrity": "sha1-JYx479FT3fk8tWEjf2EYTzaW4yc=",
+ "dev": true
+ },
+ "reduce-unique": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/reduce-unique/-/reduce-unique-1.0.0.tgz",
+ "integrity": "sha1-flhrz4ek4ytter2Cd/rWzeyfSAM=",
+ "dev": true
+ },
+ "reduce-without": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/reduce-without/-/reduce-without-1.0.1.tgz",
+ "integrity": "sha1-aK0OrRGFXJo31OglbBW7+Hly/Iw=",
+ "dev": true,
+ "requires": {
+ "test-value": "2.1.0"
+ }
+ },
+ "regex-cache": {
+ "version": "0.4.4",
+ "resolved": "https://registry.npmjs.org/regex-cache/-/regex-cache-0.4.4.tgz",
+ "integrity": "sha512-nVIZwtCjkC9YgvWkpM55B5rBhBYRZhAaJbgcFYXXsHnbZ9UZI9nnVWYZpBlCqv9ho2eZryPnWrZGsOdPwVWXWQ==",
+ "dev": true,
+ "requires": {
+ "is-equal-shallow": "0.1.3"
+ }
+ },
+ "regex-not": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/regex-not/-/regex-not-1.0.0.tgz",
+ "integrity": "sha1-Qvg+OXcWIt+CawKvF2Ul1qXxV/k=",
+ "dev": true,
+ "requires": {
+ "extend-shallow": "2.0.1"
+ }
+ },
+ "remove-trailing-separator": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/remove-trailing-separator/-/remove-trailing-separator-1.1.0.tgz",
+ "integrity": "sha1-wkvOKig62tW8P1jg1IJJuSN52O8=",
+ "dev": true
+ },
+ "repeat-element": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/repeat-element/-/repeat-element-1.1.2.tgz",
+ "integrity": "sha1-7wiaF40Ug7quTZPrmLT55OEdmQo=",
+ "dev": true
+ },
+ "repeat-string": {
+ "version": "1.6.1",
+ "resolved": "https://registry.npmjs.org/repeat-string/-/repeat-string-1.6.1.tgz",
+ "integrity": "sha1-jcrkcOHIirwtYA//Sndihtp15jc=",
+ "dev": true
+ },
+ "req-then": {
+ "version": "0.6.4",
+ "resolved": "https://registry.npmjs.org/req-then/-/req-then-0.6.4.tgz",
+ "integrity": "sha512-Uf7xsK1qPqPUetESHemNQ7nGtgOxngSFtlcAOOkx0lDAo+XRZpEA9QDrGBdyOfGq4b+a0z/D5gR2VJ+pp/dzBA==",
+ "dev": true,
+ "requires": {
+ "array-back": "2.0.0",
+ "defer-promise": "1.0.1",
+ "lodash.pick": "4.4.0",
+ "stream-read-all": "0.1.2",
+ "typical": "2.6.1"
+ },
+ "dependencies": {
+ "array-back": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/array-back/-/array-back-2.0.0.tgz",
+ "integrity": "sha512-eJv4pLLufP3g5kcZry0j6WXpIbzYw9GUB4mVJZno9wfwiBxbizTnHCw3VJb07cBihbFX48Y7oSrW9y+gt4glyw==",
+ "dev": true,
+ "requires": {
+ "typical": "2.6.1"
+ }
+ }
+ }
+ },
+ "request": {
+ "version": "2.81.0",
+ "resolved": "https://registry.npmjs.org/request/-/request-2.81.0.tgz",
+ "integrity": "sha1-xpKJRqDgbF+Nb4qTM0af/aRimKA=",
+ "optional": true,
+ "requires": {
+ "aws-sign2": "0.6.0",
+ "aws4": "1.6.0",
+ "caseless": "0.12.0",
+ "combined-stream": "1.0.5",
+ "extend": "3.0.1",
+ "forever-agent": "0.6.1",
+ "form-data": "2.1.4",
+ "har-validator": "4.2.1",
+ "hawk": "3.1.3",
+ "http-signature": "1.1.1",
+ "is-typedarray": "1.0.0",
+ "isstream": "0.1.2",
+ "json-stringify-safe": "5.0.1",
+ "mime-types": "2.1.17",
+ "oauth-sign": "0.8.2",
+ "performance-now": "0.2.0",
+ "qs": "6.4.0",
+ "safe-buffer": "5.1.1",
+ "stringstream": "0.0.5",
+ "tough-cookie": "2.3.3",
+ "tunnel-agent": "0.6.0",
+ "uuid": "3.1.0"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "0.2.0",
+ "resolved": "https://registry.npmjs.org/assert-plus/-/assert-plus-0.2.0.tgz",
+ "integrity": "sha1-104bh+ev/A24qttwIfP+SBAasjQ=",
+ "optional": true
+ },
+ "http-signature": {
+ "version": "1.1.1",
+ "resolved": "https://registry.npmjs.org/http-signature/-/http-signature-1.1.1.tgz",
+ "integrity": "sha1-33LiZwZs0Kxn+3at+OE0qPvPkb8=",
+ "optional": true,
+ "requires": {
+ "assert-plus": "0.2.0",
+ "jsprim": "1.4.1",
+ "sshpk": "1.13.1"
+ }
+ },
+ "qs": {
+ "version": "6.4.0",
+ "resolved": "https://registry.npmjs.org/qs/-/qs-6.4.0.tgz",
+ "integrity": "sha1-E+JtKK1rD/qpExLNO/cI7TUecjM=",
+ "optional": true
+ }
+ }
+ },
+ "requizzle": {
+ "version": "0.2.1",
+ "resolved": "https://registry.npmjs.org/requizzle/-/requizzle-0.2.1.tgz",
+ "integrity": "sha1-aUPDUwxNmn5G8c3dUcFY/GcM294=",
+ "dev": true,
+ "requires": {
+ "underscore": "1.6.0"
+ },
+ "dependencies": {
+ "underscore": {
+ "version": "1.6.0",
+ "resolved": "https://registry.npmjs.org/underscore/-/underscore-1.6.0.tgz",
+ "integrity": "sha1-izixDKze9jM3uLJOT/htRa6lKag=",
+ "dev": true
+ }
+ }
+ },
+ "resolve": {
+ "version": "1.5.0",
+ "resolved": "https://registry.npmjs.org/resolve/-/resolve-1.5.0.tgz",
+ "integrity": "sha512-hgoSGrc3pjzAPHNBg+KnFcK2HwlHTs/YrAGUr6qgTVUZmXv1UEXXl0bZNBKMA9fud6lRYFdPGz0xXxycPzmmiw==",
+ "dev": true,
+ "requires": {
+ "path-parse": "1.0.5"
+ }
+ },
+ "resolve-dir": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/resolve-dir/-/resolve-dir-1.0.1.tgz",
+ "integrity": "sha1-eaQGRMNivoLybv/nOcm7U4IEb0M=",
+ "dev": true,
+ "requires": {
+ "expand-tilde": "2.0.2",
+ "global-modules": "1.0.0"
+ }
+ },
+ "resolve-url": {
+ "version": "0.2.1",
+ "resolved": "https://registry.npmjs.org/resolve-url/-/resolve-url-0.2.1.tgz",
+ "integrity": "sha1-LGN/53yJOv0qZj/iGqkIAGjiBSo=",
+ "dev": true
+ },
+ "restify": {
+ "version": "5.2.0",
+ "resolved": "https://registry.npmjs.org/restify/-/restify-5.2.0.tgz",
+ "integrity": "sha1-9xMxAu85WKVtpC92BBURKnigGCI=",
+ "requires": {
+ "assert-plus": "1.0.0",
+ "bunyan": "1.8.12",
+ "clone-regexp": "1.0.0",
+ "csv": "1.1.1",
+ "dtrace-provider": "0.8.5",
+ "escape-regexp-component": "1.0.2",
+ "formidable": "1.1.1",
+ "http-signature": "1.2.0",
+ "lodash": "4.17.4",
+ "lru-cache": "4.1.1",
+ "mime": "1.3.6",
+ "negotiator": "0.6.1",
+ "once": "1.4.0",
+ "qs": "6.5.0",
+ "restify-errors": "4.3.0",
+ "semver": "5.4.1",
+ "spdy": "3.4.7",
+ "uuid": "3.1.0",
+ "vasync": "1.6.4",
+ "verror": "1.10.0"
+ }
+ },
"restify-errors": {
- "version": "https://registry.npmjs.org/restify-errors/-/restify-errors-4.3.0.tgz",
+ "version": "4.3.0",
+ "resolved": "https://registry.npmjs.org/restify-errors/-/restify-errors-4.3.0.tgz",
"integrity": "sha1-7JDzCTTX8xGRNRgd/DA+ML5gGr4=",
"requires": {
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz",
- "lodash": "https://registry.npmjs.org/lodash/-/lodash-4.17.4.tgz",
- "safe-json-stringify": "https://registry.npmjs.org/safe-json-stringify/-/safe-json-stringify-1.0.4.tgz",
- "verror": "https://registry.npmjs.org/verror/-/verror-1.10.0.tgz"
+ "assert-plus": "1.0.0",
+ "lodash": "4.17.4",
+ "safe-json-stringify": "1.0.4",
+ "verror": "1.10.0"
}
},
"rimraf": {
- "version": "https://registry.npmjs.org/rimraf/-/rimraf-2.4.5.tgz",
+ "version": "2.4.5",
+ "resolved": "https://registry.npmjs.org/rimraf/-/rimraf-2.4.5.tgz",
"integrity": "sha1-7nEM5dk6j9uFb7Xqj/Di11k0sto=",
- "optional": true,
"requires": {
- "glob": "https://registry.npmjs.org/glob/-/glob-6.0.4.tgz"
+ "glob": "6.0.4"
+ }
+ },
+ "rpio": {
+ "version": "0.9.20",
+ "resolved": "https://registry.npmjs.org/rpio/-/rpio-0.9.20.tgz",
+ "integrity": "sha1-p9XZk6UhABVdHrehKal4E64a7aU=",
+ "requires": {
+ "bindings": "1.2.1",
+ "nan": "2.6.2"
}
},
"safe-buffer": {
- "version": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.1.tgz",
- "integrity": "sha1-iTMSr2myEj3vcfV4iQAWce6yyFM="
+ "version": "5.1.1",
+ "resolved": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.1.tgz",
+ "integrity": "sha512-kKvNJn6Mm93gAczWVJg7wH+wGYWNrDHdWvpUmHyEsgCtIwwo3bqPtV4tR5tuPaUhTOo/kvhVwd8XwwOllGYkbg=="
},
"safe-json-stringify": {
- "version": "https://registry.npmjs.org/safe-json-stringify/-/safe-json-stringify-1.0.4.tgz",
+ "version": "1.0.4",
+ "resolved": "https://registry.npmjs.org/safe-json-stringify/-/safe-json-stringify-1.0.4.tgz",
"integrity": "sha1-gaCY9Efku8P/MxKiQ1IbwGDvWRE=",
"optional": true
},
"select-hose": {
- "version": "https://registry.npmjs.org/select-hose/-/select-hose-2.0.0.tgz",
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/select-hose/-/select-hose-2.0.0.tgz",
"integrity": "sha1-Yl2GWPhlr0Psliv8N2o3NZpJlMo="
},
"semver": {
- "version": "https://registry.npmjs.org/semver/-/semver-5.4.1.tgz",
- "integrity": "sha1-4FnAnYVx8FQII3M0M1BdOi8AsY4="
+ "version": "5.4.1",
+ "resolved": "https://registry.npmjs.org/semver/-/semver-5.4.1.tgz",
+ "integrity": "sha512-WfG/X9+oATh81XtllIo/I8gOiY9EXRdv1cQdyykeXK17YcUW3EXUAi2To4pcH6nZtJPr7ZOpM5OMyWJZm+8Rsg=="
+ },
+ "set-blocking": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/set-blocking/-/set-blocking-2.0.0.tgz",
+ "integrity": "sha1-BF+XgtARrppoA93TgrJDkrPYkPc=",
+ "optional": true
+ },
+ "set-getter": {
+ "version": "0.1.0",
+ "resolved": "https://registry.npmjs.org/set-getter/-/set-getter-0.1.0.tgz",
+ "integrity": "sha1-12nBgsnVpR9AkUXy+6guXoboA3Y=",
+ "dev": true,
+ "requires": {
+ "to-object-path": "0.3.0"
+ }
+ },
+ "set-immediate-shim": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/set-immediate-shim/-/set-immediate-shim-1.0.1.tgz",
+ "integrity": "sha1-SysbJ+uAip+NzEgaWOXlb1mfP2E=",
+ "dev": true
+ },
+ "set-value": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/set-value/-/set-value-2.0.0.tgz",
+ "integrity": "sha512-hw0yxk9GT/Hr5yJEYnHNKYXkIA8mVJgd9ditYZCe16ZczcaELYYcfvaXesNACk2O8O0nTiPQcQhGUQj8JLzeeg==",
+ "dev": true,
+ "requires": {
+ "extend-shallow": "2.0.1",
+ "is-extendable": "0.1.1",
+ "is-plain-object": "2.0.4",
+ "split-string": "3.1.0"
+ }
+ },
+ "shelljs": {
+ "version": "0.2.6",
+ "resolved": "https://registry.npmjs.org/shelljs/-/shelljs-0.2.6.tgz",
+ "integrity": "sha1-kEktcv/MgVmXa6umL7D2iE8MM3g=",
+ "dev": true
+ },
+ "signal-exit": {
+ "version": "3.0.2",
+ "resolved": "https://registry.npmjs.org/signal-exit/-/signal-exit-3.0.2.tgz",
+ "integrity": "sha1-tf3AjxKH6hF4Yo5BXiUTK3NkbG0=",
+ "optional": true
+ },
+ "snapdragon": {
+ "version": "0.8.1",
+ "resolved": "https://registry.npmjs.org/snapdragon/-/snapdragon-0.8.1.tgz",
+ "integrity": "sha1-4StUh/re0+PeoKyR6UAL91tAE3A=",
+ "dev": true,
+ "requires": {
+ "base": "0.11.2",
+ "debug": "2.6.8",
+ "define-property": "0.2.5",
+ "extend-shallow": "2.0.1",
+ "map-cache": "0.2.2",
+ "source-map": "0.5.7",
+ "source-map-resolve": "0.5.1",
+ "use": "2.0.2"
+ },
+ "dependencies": {
+ "define-property": {
+ "version": "0.2.5",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-0.2.5.tgz",
+ "integrity": "sha1-w1se+RjsPJkPmlvFe+BKrOxcgRY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "0.1.6"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-0.1.6.tgz",
+ "integrity": "sha1-qeEss66Nh2cn7u84Q/igiXtcmNY=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-data-descriptor": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-0.1.4.tgz",
+ "integrity": "sha1-C17mSDiOLIYCgueT8YVv7D8wG1Y=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-0.1.6.tgz",
+ "integrity": "sha512-avDYr0SB3DwO9zsMov0gKCESFYqCnE4hq/4z3TdUlukEy5t9C0YRq7HLrsN52NAcqXKaepeCD0n+B0arnVG3Hg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "0.1.6",
+ "is-data-descriptor": "0.1.4",
+ "kind-of": "5.1.0"
+ }
+ },
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ },
+ "source-map": {
+ "version": "0.5.7",
+ "resolved": "https://registry.npmjs.org/source-map/-/source-map-0.5.7.tgz",
+ "integrity": "sha1-igOdLRAh0i0eoUyA2OpGi6LvP8w=",
+ "dev": true
+ }
+ }
+ },
+ "snapdragon-node": {
+ "version": "2.1.1",
+ "resolved": "https://registry.npmjs.org/snapdragon-node/-/snapdragon-node-2.1.1.tgz",
+ "integrity": "sha512-O27l4xaMYt/RSQ5TR3vpWCAB5Kb/czIcqUFOM/C4fYcLnbZUc1PkjTAMjof2pBWaSTwOUd6qUHcFGVGj7aIwnw==",
+ "dev": true,
+ "requires": {
+ "define-property": "1.0.0",
+ "isobject": "3.0.1",
+ "snapdragon-util": "3.0.1"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
+ "snapdragon-util": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/snapdragon-util/-/snapdragon-util-3.0.1.tgz",
+ "integrity": "sha512-mbKkMdQKsjX4BAL4bRYTj21edOf8cN7XHdYUJEe+Zn99hVEYcMvKPct1IqNe7+AZPirn8BCDOQBHQZknqmKlZQ==",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ }
+ },
+ "sntp": {
+ "version": "1.0.9",
+ "resolved": "https://registry.npmjs.org/sntp/-/sntp-1.0.9.tgz",
+ "integrity": "sha1-ZUEYTMkK7qbG57NeJlkIJEPGYZg=",
+ "requires": {
+ "hoek": "2.16.3"
+ }
+ },
+ "sort-array": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/sort-array/-/sort-array-1.1.2.tgz",
+ "integrity": "sha1-uImGBTwBcKf53mPxiknsecJMPmQ=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "object-get": "2.1.0",
+ "typical": "2.6.1"
+ }
+ },
+ "source-map": {
+ "version": "0.1.43",
+ "resolved": "https://registry.npmjs.org/source-map/-/source-map-0.1.43.tgz",
+ "integrity": "sha1-wkvBRspRfBRx9drL4lcbK3+eM0Y=",
+ "dev": true,
+ "requires": {
+ "amdefine": "1.0.1"
+ }
+ },
+ "source-map-resolve": {
+ "version": "0.5.1",
+ "resolved": "https://registry.npmjs.org/source-map-resolve/-/source-map-resolve-0.5.1.tgz",
+ "integrity": "sha512-0KW2wvzfxm8NCTb30z0LMNyPqWCdDGE2viwzUaucqJdkTRXtZiSY3I+2A6nVAjmdOy0I4gU8DwnVVGsk9jvP2A==",
+ "dev": true,
+ "requires": {
+ "atob": "2.0.3",
+ "decode-uri-component": "0.2.0",
+ "resolve-url": "0.2.1",
+ "source-map-url": "0.4.0",
+ "urix": "0.1.0"
+ }
+ },
+ "source-map-url": {
+ "version": "0.4.0",
+ "resolved": "https://registry.npmjs.org/source-map-url/-/source-map-url-0.4.0.tgz",
+ "integrity": "sha1-PpNdfd1zYxuXZZlW1VEo6HtQhKM=",
+ "dev": true
},
"spdy": {
- "version": "https://registry.npmjs.org/spdy/-/spdy-3.4.7.tgz",
+ "version": "3.4.7",
+ "resolved": "https://registry.npmjs.org/spdy/-/spdy-3.4.7.tgz",
"integrity": "sha1-Qv9B7OXMD5mjpsKKq7c/XDsDrLw=",
"requires": {
- "debug": "https://registry.npmjs.org/debug/-/debug-2.6.8.tgz",
- "handle-thing": "https://registry.npmjs.org/handle-thing/-/handle-thing-1.2.5.tgz",
- "http-deceiver": "https://registry.npmjs.org/http-deceiver/-/http-deceiver-1.2.7.tgz",
- "safe-buffer": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.1.tgz",
- "select-hose": "https://registry.npmjs.org/select-hose/-/select-hose-2.0.0.tgz",
- "spdy-transport": "https://registry.npmjs.org/spdy-transport/-/spdy-transport-2.0.20.tgz"
+ "debug": "2.6.8",
+ "handle-thing": "1.2.5",
+ "http-deceiver": "1.2.7",
+ "safe-buffer": "5.1.1",
+ "select-hose": "2.0.0",
+ "spdy-transport": "2.0.20"
}
},
"spdy-transport": {
- "version": "https://registry.npmjs.org/spdy-transport/-/spdy-transport-2.0.20.tgz",
+ "version": "2.0.20",
+ "resolved": "https://registry.npmjs.org/spdy-transport/-/spdy-transport-2.0.20.tgz",
"integrity": "sha1-c15yBUxIayNU/onnAiVgBKOazk0=",
"requires": {
- "debug": "https://registry.npmjs.org/debug/-/debug-2.6.8.tgz",
- "detect-node": "https://registry.npmjs.org/detect-node/-/detect-node-2.0.3.tgz",
- "hpack.js": "https://registry.npmjs.org/hpack.js/-/hpack.js-2.1.6.tgz",
- "obuf": "https://registry.npmjs.org/obuf/-/obuf-1.1.1.tgz",
- "readable-stream": "https://registry.npmjs.org/readable-stream/-/readable-stream-2.3.3.tgz",
- "safe-buffer": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.1.tgz",
- "wbuf": "https://registry.npmjs.org/wbuf/-/wbuf-1.7.2.tgz"
+ "debug": "2.6.8",
+ "detect-node": "2.0.3",
+ "hpack.js": "2.1.6",
+ "obuf": "1.1.1",
+ "readable-stream": "2.3.3",
+ "safe-buffer": "5.1.1",
+ "wbuf": "1.7.2"
}
},
+ "split-string": {
+ "version": "3.1.0",
+ "resolved": "https://registry.npmjs.org/split-string/-/split-string-3.1.0.tgz",
+ "integrity": "sha512-NzNVhJDYpwceVVii8/Hu6DKfD2G+NrQHlS/V/qgv763EYudVwEcMQNxd2lh+0VrUByXN/oJkl5grOhYWvQUYiw==",
+ "dev": true,
+ "requires": {
+ "extend-shallow": "3.0.2"
+ },
+ "dependencies": {
+ "extend-shallow": {
+ "version": "3.0.2",
+ "resolved": "https://registry.npmjs.org/extend-shallow/-/extend-shallow-3.0.2.tgz",
+ "integrity": "sha1-Jqcarwc7OfshJxcnRhMcJwQCjbg=",
+ "dev": true,
+ "requires": {
+ "assign-symbols": "1.0.0",
+ "is-extendable": "1.0.1"
+ }
+ },
+ "is-extendable": {
+ "version": "1.0.1",
+ "resolved": "https://registry.npmjs.org/is-extendable/-/is-extendable-1.0.1.tgz",
+ "integrity": "sha512-arnXMxT1hhoKo9k1LZdmlNyJdDDfy2v0fXjFlmok4+i8ul/6WlbVge9bhM74OpNPQPMGUToDtz+KXa1PneJxOA==",
+ "dev": true,
+ "requires": {
+ "is-plain-object": "2.0.4"
+ }
+ }
+ }
+ },
+ "sqlite3": {
+ "version": "3.1.13",
+ "resolved": "https://registry.npmjs.org/sqlite3/-/sqlite3-3.1.13.tgz",
+ "integrity": "sha512-JxXKPJnkZ6NuHRojq+g2WXWBt3M1G9sjZaYiHEWSTGijDM3cwju/0T2XbWqMXFmPqDgw+iB7zKQvnns4bvzXlw==",
+ "requires": {
+ "nan": "2.7.0",
+ "node-pre-gyp": "0.6.38"
+ },
+ "dependencies": {
+ "abbrev": {
+ "version": "1.1.1",
+ "bundled": true
+ },
+ "ajv": {
+ "version": "4.11.8",
+ "bundled": true,
+ "requires": {
+ "co": "4.6.0",
+ "json-stable-stringify": "1.0.1"
+ }
+ },
+ "ansi-regex": {
+ "version": "2.1.1",
+ "bundled": true
+ },
+ "aproba": {
+ "version": "1.2.0",
+ "bundled": true
+ },
+ "are-we-there-yet": {
+ "version": "1.1.4",
+ "bundled": true,
+ "requires": {
+ "delegates": "1.0.0",
+ "readable-stream": "2.3.3"
+ }
+ },
+ "asn1": {
+ "version": "0.2.3",
+ "bundled": true
+ },
+ "assert-plus": {
+ "version": "0.2.0",
+ "bundled": true
+ },
+ "asynckit": {
+ "version": "0.4.0",
+ "bundled": true
+ },
+ "aws-sign2": {
+ "version": "0.6.0",
+ "bundled": true
+ },
+ "aws4": {
+ "version": "1.6.0",
+ "bundled": true
+ },
+ "balanced-match": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "bcrypt-pbkdf": {
+ "version": "1.0.1",
+ "bundled": true,
+ "optional": true,
+ "requires": {
+ "tweetnacl": "0.14.5"
+ }
+ },
+ "block-stream": {
+ "version": "0.0.9",
+ "bundled": true,
+ "requires": {
+ "inherits": "2.0.3"
+ }
+ },
+ "boom": {
+ "version": "2.10.1",
+ "bundled": true,
+ "requires": {
+ "hoek": "2.16.3"
+ }
+ },
+ "brace-expansion": {
+ "version": "1.1.8",
+ "bundled": true,
+ "requires": {
+ "balanced-match": "1.0.0",
+ "concat-map": "0.0.1"
+ }
+ },
+ "caseless": {
+ "version": "0.12.0",
+ "bundled": true
+ },
+ "co": {
+ "version": "4.6.0",
+ "bundled": true
+ },
+ "code-point-at": {
+ "version": "1.1.0",
+ "bundled": true
+ },
+ "combined-stream": {
+ "version": "1.0.5",
+ "bundled": true,
+ "requires": {
+ "delayed-stream": "1.0.0"
+ }
+ },
+ "concat-map": {
+ "version": "0.0.1",
+ "bundled": true
+ },
+ "console-control-strings": {
+ "version": "1.1.0",
+ "bundled": true
+ },
+ "core-util-is": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "cryptiles": {
+ "version": "2.0.5",
+ "bundled": true,
+ "requires": {
+ "boom": "2.10.1"
+ }
+ },
+ "dashdash": {
+ "version": "1.14.1",
+ "bundled": true,
+ "requires": {
+ "assert-plus": "1.0.0"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true
+ }
+ }
+ },
+ "debug": {
+ "version": "2.6.9",
+ "bundled": true,
+ "requires": {
+ "ms": "2.0.0"
+ }
+ },
+ "deep-extend": {
+ "version": "0.4.2",
+ "bundled": true
+ },
+ "delayed-stream": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "delegates": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "ecc-jsbn": {
+ "version": "0.1.1",
+ "bundled": true,
+ "optional": true,
+ "requires": {
+ "jsbn": "0.1.1"
+ }
+ },
+ "extend": {
+ "version": "3.0.1",
+ "bundled": true
+ },
+ "extsprintf": {
+ "version": "1.3.0",
+ "bundled": true
+ },
+ "forever-agent": {
+ "version": "0.6.1",
+ "bundled": true
+ },
+ "form-data": {
+ "version": "2.1.4",
+ "bundled": true,
+ "requires": {
+ "asynckit": "0.4.0",
+ "combined-stream": "1.0.5",
+ "mime-types": "2.1.17"
+ }
+ },
+ "fs.realpath": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "fstream": {
+ "version": "1.0.11",
+ "bundled": true,
+ "requires": {
+ "graceful-fs": "4.1.11",
+ "inherits": "2.0.3",
+ "mkdirp": "0.5.1",
+ "rimraf": "2.6.2"
+ }
+ },
+ "fstream-ignore": {
+ "version": "1.0.5",
+ "bundled": true,
+ "requires": {
+ "fstream": "1.0.11",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4"
+ }
+ },
+ "gauge": {
+ "version": "2.7.4",
+ "bundled": true,
+ "requires": {
+ "aproba": "1.2.0",
+ "console-control-strings": "1.1.0",
+ "has-unicode": "2.0.1",
+ "object-assign": "4.1.1",
+ "signal-exit": "3.0.2",
+ "string-width": "1.0.2",
+ "strip-ansi": "3.0.1",
+ "wide-align": "1.1.2"
+ }
+ },
+ "getpass": {
+ "version": "0.1.7",
+ "bundled": true,
+ "requires": {
+ "assert-plus": "1.0.0"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true
+ }
+ }
+ },
+ "glob": {
+ "version": "7.1.2",
+ "bundled": true,
+ "requires": {
+ "fs.realpath": "1.0.0",
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
+ },
+ "graceful-fs": {
+ "version": "4.1.11",
+ "bundled": true
+ },
+ "har-schema": {
+ "version": "1.0.5",
+ "bundled": true
+ },
+ "har-validator": {
+ "version": "4.2.1",
+ "bundled": true,
+ "requires": {
+ "ajv": "4.11.8",
+ "har-schema": "1.0.5"
+ }
+ },
+ "has-unicode": {
+ "version": "2.0.1",
+ "bundled": true
+ },
+ "hawk": {
+ "version": "3.1.3",
+ "bundled": true,
+ "requires": {
+ "boom": "2.10.1",
+ "cryptiles": "2.0.5",
+ "hoek": "2.16.3",
+ "sntp": "1.0.9"
+ }
+ },
+ "hoek": {
+ "version": "2.16.3",
+ "bundled": true
+ },
+ "http-signature": {
+ "version": "1.1.1",
+ "bundled": true,
+ "requires": {
+ "assert-plus": "0.2.0",
+ "jsprim": "1.4.1",
+ "sshpk": "1.13.1"
+ }
+ },
+ "inflight": {
+ "version": "1.0.6",
+ "bundled": true,
+ "requires": {
+ "once": "1.4.0",
+ "wrappy": "1.0.2"
+ }
+ },
+ "inherits": {
+ "version": "2.0.3",
+ "bundled": true
+ },
+ "ini": {
+ "version": "1.3.4",
+ "bundled": true
+ },
+ "is-fullwidth-code-point": {
+ "version": "1.0.0",
+ "bundled": true,
+ "requires": {
+ "number-is-nan": "1.0.1"
+ }
+ },
+ "is-typedarray": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "isarray": {
+ "version": "1.0.0",
+ "bundled": true
+ },
+ "isstream": {
+ "version": "0.1.2",
+ "bundled": true
+ },
+ "jsbn": {
+ "version": "0.1.1",
+ "bundled": true,
+ "optional": true
+ },
+ "json-schema": {
+ "version": "0.2.3",
+ "bundled": true
+ },
+ "json-stable-stringify": {
+ "version": "1.0.1",
+ "bundled": true,
+ "requires": {
+ "jsonify": "0.0.0"
+ }
+ },
+ "json-stringify-safe": {
+ "version": "5.0.1",
+ "bundled": true
+ },
+ "jsonify": {
+ "version": "0.0.0",
+ "bundled": true
+ },
+ "jsprim": {
+ "version": "1.4.1",
+ "bundled": true,
+ "requires": {
+ "assert-plus": "1.0.0",
+ "extsprintf": "1.3.0",
+ "json-schema": "0.2.3",
+ "verror": "1.10.0"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true
+ }
+ }
+ },
+ "mime-db": {
+ "version": "1.30.0",
+ "bundled": true
+ },
+ "mime-types": {
+ "version": "2.1.17",
+ "bundled": true,
+ "requires": {
+ "mime-db": "1.30.0"
+ }
+ },
+ "minimatch": {
+ "version": "3.0.4",
+ "bundled": true,
+ "requires": {
+ "brace-expansion": "1.1.8"
+ }
+ },
+ "minimist": {
+ "version": "0.0.8",
+ "bundled": true
+ },
+ "mkdirp": {
+ "version": "0.5.1",
+ "bundled": true,
+ "requires": {
+ "minimist": "0.0.8"
+ }
+ },
+ "ms": {
+ "version": "2.0.0",
+ "bundled": true
+ },
+ "nan": {
+ "version": "2.7.0",
+ "resolved": "https://registry.npmjs.org/nan/-/nan-2.7.0.tgz",
+ "integrity": "sha1-2Vv3IeyHfgjbJ27T/G63j5CDrUY="
+ },
+ "node-pre-gyp": {
+ "version": "0.6.38",
+ "bundled": true,
+ "requires": {
+ "hawk": "3.1.3",
+ "mkdirp": "0.5.1",
+ "nopt": "4.0.1",
+ "npmlog": "4.1.2",
+ "rc": "1.2.1",
+ "request": "2.81.0",
+ "rimraf": "2.6.2",
+ "semver": "5.4.1",
+ "tar": "2.2.1",
+ "tar-pack": "3.4.0"
+ }
+ },
+ "nopt": {
+ "version": "4.0.1",
+ "bundled": true,
+ "requires": {
+ "abbrev": "1.1.1",
+ "osenv": "0.1.4"
+ }
+ },
+ "npmlog": {
+ "version": "4.1.2",
+ "bundled": true,
+ "requires": {
+ "are-we-there-yet": "1.1.4",
+ "console-control-strings": "1.1.0",
+ "gauge": "2.7.4",
+ "set-blocking": "2.0.0"
+ }
+ },
+ "number-is-nan": {
+ "version": "1.0.1",
+ "bundled": true
+ },
+ "oauth-sign": {
+ "version": "0.8.2",
+ "bundled": true
+ },
+ "object-assign": {
+ "version": "4.1.1",
+ "bundled": true
+ },
+ "once": {
+ "version": "1.4.0",
+ "bundled": true,
+ "requires": {
+ "wrappy": "1.0.2"
+ }
+ },
+ "os-homedir": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "os-tmpdir": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "osenv": {
+ "version": "0.1.4",
+ "bundled": true,
+ "requires": {
+ "os-homedir": "1.0.2",
+ "os-tmpdir": "1.0.2"
+ }
+ },
+ "path-is-absolute": {
+ "version": "1.0.1",
+ "bundled": true
+ },
+ "performance-now": {
+ "version": "0.2.0",
+ "bundled": true
+ },
+ "process-nextick-args": {
+ "version": "1.0.7",
+ "bundled": true
+ },
+ "punycode": {
+ "version": "1.4.1",
+ "bundled": true
+ },
+ "qs": {
+ "version": "6.4.0",
+ "bundled": true
+ },
+ "rc": {
+ "version": "1.2.1",
+ "bundled": true,
+ "requires": {
+ "deep-extend": "0.4.2",
+ "ini": "1.3.4",
+ "minimist": "1.2.0",
+ "strip-json-comments": "2.0.1"
+ },
+ "dependencies": {
+ "minimist": {
+ "version": "1.2.0",
+ "bundled": true
+ }
+ }
+ },
+ "readable-stream": {
+ "version": "2.3.3",
+ "bundled": true,
+ "requires": {
+ "core-util-is": "1.0.2",
+ "inherits": "2.0.3",
+ "isarray": "1.0.0",
+ "process-nextick-args": "1.0.7",
+ "safe-buffer": "5.1.1",
+ "string_decoder": "1.0.3",
+ "util-deprecate": "1.0.2"
+ }
+ },
+ "request": {
+ "version": "2.81.0",
+ "bundled": true,
+ "requires": {
+ "aws-sign2": "0.6.0",
+ "aws4": "1.6.0",
+ "caseless": "0.12.0",
+ "combined-stream": "1.0.5",
+ "extend": "3.0.1",
+ "forever-agent": "0.6.1",
+ "form-data": "2.1.4",
+ "har-validator": "4.2.1",
+ "hawk": "3.1.3",
+ "http-signature": "1.1.1",
+ "is-typedarray": "1.0.0",
+ "isstream": "0.1.2",
+ "json-stringify-safe": "5.0.1",
+ "mime-types": "2.1.17",
+ "oauth-sign": "0.8.2",
+ "performance-now": "0.2.0",
+ "qs": "6.4.0",
+ "safe-buffer": "5.1.1",
+ "stringstream": "0.0.5",
+ "tough-cookie": "2.3.3",
+ "tunnel-agent": "0.6.0",
+ "uuid": "3.1.0"
+ }
+ },
+ "rimraf": {
+ "version": "2.6.2",
+ "bundled": true,
+ "requires": {
+ "glob": "7.1.2"
+ }
+ },
+ "safe-buffer": {
+ "version": "5.1.1",
+ "bundled": true
+ },
+ "semver": {
+ "version": "5.4.1",
+ "bundled": true
+ },
+ "set-blocking": {
+ "version": "2.0.0",
+ "bundled": true
+ },
+ "signal-exit": {
+ "version": "3.0.2",
+ "bundled": true
+ },
+ "sntp": {
+ "version": "1.0.9",
+ "bundled": true,
+ "requires": {
+ "hoek": "2.16.3"
+ }
+ },
+ "sshpk": {
+ "version": "1.13.1",
+ "bundled": true,
+ "requires": {
+ "asn1": "0.2.3",
+ "assert-plus": "1.0.0",
+ "bcrypt-pbkdf": "1.0.1",
+ "dashdash": "1.14.1",
+ "ecc-jsbn": "0.1.1",
+ "getpass": "0.1.7",
+ "jsbn": "0.1.1",
+ "tweetnacl": "0.14.5"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true
+ }
+ }
+ },
+ "string-width": {
+ "version": "1.0.2",
+ "bundled": true,
+ "requires": {
+ "code-point-at": "1.1.0",
+ "is-fullwidth-code-point": "1.0.0",
+ "strip-ansi": "3.0.1"
+ }
+ },
+ "string_decoder": {
+ "version": "1.0.3",
+ "bundled": true,
+ "requires": {
+ "safe-buffer": "5.1.1"
+ }
+ },
+ "stringstream": {
+ "version": "0.0.5",
+ "bundled": true
+ },
+ "strip-ansi": {
+ "version": "3.0.1",
+ "bundled": true,
+ "requires": {
+ "ansi-regex": "2.1.1"
+ }
+ },
+ "strip-json-comments": {
+ "version": "2.0.1",
+ "bundled": true
+ },
+ "tar": {
+ "version": "2.2.1",
+ "bundled": true,
+ "requires": {
+ "block-stream": "0.0.9",
+ "fstream": "1.0.11",
+ "inherits": "2.0.3"
+ }
+ },
+ "tar-pack": {
+ "version": "3.4.0",
+ "bundled": true,
+ "requires": {
+ "debug": "2.6.9",
+ "fstream": "1.0.11",
+ "fstream-ignore": "1.0.5",
+ "once": "1.4.0",
+ "readable-stream": "2.3.3",
+ "rimraf": "2.6.2",
+ "tar": "2.2.1",
+ "uid-number": "0.0.6"
+ }
+ },
+ "tough-cookie": {
+ "version": "2.3.3",
+ "bundled": true,
+ "requires": {
+ "punycode": "1.4.1"
+ }
+ },
+ "tunnel-agent": {
+ "version": "0.6.0",
+ "bundled": true,
+ "requires": {
+ "safe-buffer": "5.1.1"
+ }
+ },
+ "tweetnacl": {
+ "version": "0.14.5",
+ "bundled": true,
+ "optional": true
+ },
+ "uid-number": {
+ "version": "0.0.6",
+ "bundled": true
+ },
+ "util-deprecate": {
+ "version": "1.0.2",
+ "bundled": true
+ },
+ "uuid": {
+ "version": "3.1.0",
+ "bundled": true
+ },
+ "verror": {
+ "version": "1.10.0",
+ "bundled": true,
+ "requires": {
+ "assert-plus": "1.0.0",
+ "core-util-is": "1.0.2",
+ "extsprintf": "1.3.0"
+ },
+ "dependencies": {
+ "assert-plus": {
+ "version": "1.0.0",
+ "bundled": true
+ }
+ }
+ },
+ "wide-align": {
+ "version": "1.1.2",
+ "bundled": true,
+ "requires": {
+ "string-width": "1.0.2"
+ }
+ },
+ "wrappy": {
+ "version": "1.0.2",
+ "bundled": true
+ }
+ }
+ },
+ "squel": {
+ "version": "5.12.0",
+ "resolved": "https://registry.npmjs.org/squel/-/squel-5.12.0.tgz",
+ "integrity": "sha1-+NAxDbjSymO1w2wR3vwPeZP8944="
+ },
"sshpk": {
- "version": "https://registry.npmjs.org/sshpk/-/sshpk-1.13.1.tgz",
+ "version": "1.13.1",
+ "resolved": "https://registry.npmjs.org/sshpk/-/sshpk-1.13.1.tgz",
"integrity": "sha1-US322mKHFEMW3EwY/hzx2UBzm+M=",
"requires": {
- "asn1": "https://registry.npmjs.org/asn1/-/asn1-0.2.3.tgz",
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz",
- "bcrypt-pbkdf": "https://registry.npmjs.org/bcrypt-pbkdf/-/bcrypt-pbkdf-1.0.1.tgz",
- "dashdash": "https://registry.npmjs.org/dashdash/-/dashdash-1.14.1.tgz",
- "ecc-jsbn": "https://registry.npmjs.org/ecc-jsbn/-/ecc-jsbn-0.1.1.tgz",
- "getpass": "https://registry.npmjs.org/getpass/-/getpass-0.1.7.tgz",
- "jsbn": "https://registry.npmjs.org/jsbn/-/jsbn-0.1.1.tgz",
- "tweetnacl": "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.14.5.tgz"
+ "asn1": "0.2.3",
+ "assert-plus": "1.0.0",
+ "bcrypt-pbkdf": "1.0.1",
+ "dashdash": "1.14.1",
+ "ecc-jsbn": "0.1.1",
+ "getpass": "0.1.7",
+ "jsbn": "0.1.1",
+ "tweetnacl": "0.14.5"
}
},
"stack-trace": {
@@ -544,64 +4878,737 @@
"resolved": "https://registry.npmjs.org/stack-trace/-/stack-trace-0.0.10.tgz",
"integrity": "sha1-VHxws0fo0ytOEI6hoqFZ5f3eGcA="
},
+ "static-extend": {
+ "version": "0.1.2",
+ "resolved": "https://registry.npmjs.org/static-extend/-/static-extend-0.1.2.tgz",
+ "integrity": "sha1-YICcOcv/VTNyJv1eC1IPNB8ftcY=",
+ "dev": true,
+ "requires": {
+ "define-property": "0.2.5",
+ "object-copy": "0.1.0"
+ },
+ "dependencies": {
+ "define-property": {
+ "version": "0.2.5",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-0.2.5.tgz",
+ "integrity": "sha1-w1se+RjsPJkPmlvFe+BKrOxcgRY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "0.1.6"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-0.1.6.tgz",
+ "integrity": "sha1-qeEss66Nh2cn7u84Q/igiXtcmNY=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-data-descriptor": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-0.1.4.tgz",
+ "integrity": "sha1-C17mSDiOLIYCgueT8YVv7D8wG1Y=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-0.1.6.tgz",
+ "integrity": "sha512-avDYr0SB3DwO9zsMov0gKCESFYqCnE4hq/4z3TdUlukEy5t9C0YRq7HLrsN52NAcqXKaepeCD0n+B0arnVG3Hg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "0.1.6",
+ "is-data-descriptor": "0.1.4",
+ "kind-of": "5.1.0"
+ }
+ },
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ }
+ }
+ },
+ "stream-connect": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/stream-connect/-/stream-connect-1.0.2.tgz",
+ "integrity": "sha1-GLyB8u2zW4tdmoAJIAqYUxRCipc=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4"
+ }
+ },
+ "stream-read-all": {
+ "version": "0.1.2",
+ "resolved": "https://registry.npmjs.org/stream-read-all/-/stream-read-all-0.1.2.tgz",
+ "integrity": "sha512-KX42xBg853m+KnwRtwCKT95ShopAbY/MNKs2dBQ0WkNeuJdqgQYRtGRbTlxdx0L6t979h3z/wMq2eMSAu7Tygw==",
+ "dev": true
+ },
"stream-transform": {
- "version": "https://registry.npmjs.org/stream-transform/-/stream-transform-0.1.2.tgz",
+ "version": "0.1.2",
+ "resolved": "https://registry.npmjs.org/stream-transform/-/stream-transform-0.1.2.tgz",
"integrity": "sha1-fY5rTgOsR4F3j4x5UXUBv7B2Kp8="
},
- "string_decoder": {
- "version": "https://registry.npmjs.org/string_decoder/-/string_decoder-1.0.3.tgz",
- "integrity": "sha1-D8Z9fBQYJd6UKC3VNr7GubzoYKs=",
+ "stream-via": {
+ "version": "1.0.4",
+ "resolved": "https://registry.npmjs.org/stream-via/-/stream-via-1.0.4.tgz",
+ "integrity": "sha512-DBp0lSvX5G9KGRDTkR/R+a29H+Wk2xItOF+MpZLLNDWbEV9tGPnqLPxHEYjmiz8xGtJHRIqmI+hCjmNzqoA4nQ==",
+ "dev": true
+ },
+ "string-width": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/string-width/-/string-width-1.0.2.tgz",
+ "integrity": "sha1-EYvfW4zcUaKn5w0hHgfisLmxB9M=",
"requires": {
- "safe-buffer": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.1.tgz"
+ "code-point-at": "1.1.0",
+ "is-fullwidth-code-point": "1.0.0",
+ "strip-ansi": "3.0.1"
+ }
+ },
+ "string_decoder": {
+ "version": "1.0.3",
+ "resolved": "https://registry.npmjs.org/string_decoder/-/string_decoder-1.0.3.tgz",
+ "integrity": "sha512-4AH6Z5fzNNBcH+6XDMfA/BTt87skxqJlO0lAh3Dker5zThcAxG6mKz+iGu308UKoPPQ8Dcqx/4JhujzltRa+hQ==",
+ "requires": {
+ "safe-buffer": "5.1.1"
+ }
+ },
+ "stringstream": {
+ "version": "0.0.5",
+ "resolved": "https://registry.npmjs.org/stringstream/-/stringstream-0.0.5.tgz",
+ "integrity": "sha1-TkhM1N5aC7vuGORjB3EKioFiGHg=",
+ "optional": true
+ },
+ "strip-ansi": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/strip-ansi/-/strip-ansi-3.0.1.tgz",
+ "integrity": "sha1-ajhfuIU9lS1f8F0Oiq+UJ43GPc8=",
+ "requires": {
+ "ansi-regex": "2.1.1"
+ }
+ },
+ "strip-json-comments": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/strip-json-comments/-/strip-json-comments-2.0.1.tgz",
+ "integrity": "sha1-PFMZQukIwml8DsNEhYwobHygpgo="
+ },
+ "table-layout": {
+ "version": "0.4.2",
+ "resolved": "https://registry.npmjs.org/table-layout/-/table-layout-0.4.2.tgz",
+ "integrity": "sha512-tygyl5+eSHj4chpq5Zfy6cpc7MOUBClAW9ozghFH7hg9bAUzShOYn+/vUzTRkKOSLJWKfgYtP2tAU2c0oAD8eg==",
+ "dev": true,
+ "requires": {
+ "array-back": "2.0.0",
+ "deep-extend": "0.5.0",
+ "lodash.padend": "4.6.1",
+ "typical": "2.6.1",
+ "wordwrapjs": "3.0.0"
+ },
+ "dependencies": {
+ "array-back": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/array-back/-/array-back-2.0.0.tgz",
+ "integrity": "sha512-eJv4pLLufP3g5kcZry0j6WXpIbzYw9GUB4mVJZno9wfwiBxbizTnHCw3VJb07cBihbFX48Y7oSrW9y+gt4glyw==",
+ "dev": true,
+ "requires": {
+ "typical": "2.6.1"
+ }
+ }
+ }
+ },
+ "taffydb": {
+ "version": "2.6.2",
+ "resolved": "https://registry.npmjs.org/taffydb/-/taffydb-2.6.2.tgz",
+ "integrity": "sha1-fLy2S1oUG2ou/CxdLGe04VCyomg=",
+ "dev": true
+ },
+ "tar": {
+ "version": "2.2.1",
+ "resolved": "https://registry.npmjs.org/tar/-/tar-2.2.1.tgz",
+ "integrity": "sha1-jk0qJWwOIYXGsYrWlK7JaLg8sdE=",
+ "requires": {
+ "block-stream": "0.0.9",
+ "fstream": "1.0.11",
+ "inherits": "2.0.3"
+ }
+ },
+ "tar-pack": {
+ "version": "3.4.1",
+ "resolved": "https://registry.npmjs.org/tar-pack/-/tar-pack-3.4.1.tgz",
+ "integrity": "sha512-PPRybI9+jM5tjtCbN2cxmmRU7YmqT3Zv/UDy48tAh2XRkLa9bAORtSWLkVc13+GJF+cdTh1yEnHEk3cpTaL5Kg==",
+ "optional": true,
+ "requires": {
+ "debug": "2.6.8",
+ "fstream": "1.0.11",
+ "fstream-ignore": "1.0.5",
+ "once": "1.4.0",
+ "readable-stream": "2.3.3",
+ "rimraf": "2.6.2",
+ "tar": "2.2.1",
+ "uid-number": "0.0.6"
+ },
+ "dependencies": {
+ "glob": {
+ "version": "7.1.2",
+ "resolved": "https://registry.npmjs.org/glob/-/glob-7.1.2.tgz",
+ "integrity": "sha512-MJTUg1kjuLeQCJ+ccE4Vpa6kKVXkPYJ2mOCQyUuKLcLQsdrMCpBPUi8qVE6+YuaJkozeA9NusTAw3hLr8Xe5EQ==",
+ "optional": true,
+ "requires": {
+ "fs.realpath": "1.0.0",
+ "inflight": "1.0.6",
+ "inherits": "2.0.3",
+ "minimatch": "3.0.4",
+ "once": "1.4.0",
+ "path-is-absolute": "1.0.1"
+ }
+ },
+ "rimraf": {
+ "version": "2.6.2",
+ "resolved": "https://registry.npmjs.org/rimraf/-/rimraf-2.6.2.tgz",
+ "integrity": "sha512-lreewLK/BlghmxtfH36YYVg1i8IAce4TI7oao75I1g245+6BctqTVQiBP3YUJ9C6DQOXJmkYR9X9fCLtCOJc5w==",
+ "optional": true,
+ "requires": {
+ "glob": "7.1.2"
+ }
+ }
+ }
+ },
+ "temp-path": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/temp-path/-/temp-path-1.0.0.tgz",
+ "integrity": "sha1-JLFUOXOrRCiW2a02fdnL2/r+kYs=",
+ "dev": true
+ },
+ "test-value": {
+ "version": "2.1.0",
+ "resolved": "https://registry.npmjs.org/test-value/-/test-value-2.1.0.tgz",
+ "integrity": "sha1-Edpv9nDzRxpztiXKTz/c97t0gpE=",
+ "dev": true,
+ "requires": {
+ "array-back": "1.0.4",
+ "typical": "2.6.1"
+ }
+ },
+ "to-object-path": {
+ "version": "0.3.0",
+ "resolved": "https://registry.npmjs.org/to-object-path/-/to-object-path-0.3.0.tgz",
+ "integrity": "sha1-KXWIt7Dn4KwI4E5nL4XB9JmeF68=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ }
+ },
+ "to-regex": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/to-regex/-/to-regex-3.0.1.tgz",
+ "integrity": "sha1-FTWL7kosg712N3uh3ASdDxiDeq4=",
+ "dev": true,
+ "requires": {
+ "define-property": "0.2.5",
+ "extend-shallow": "2.0.1",
+ "regex-not": "1.0.0"
+ },
+ "dependencies": {
+ "define-property": {
+ "version": "0.2.5",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-0.2.5.tgz",
+ "integrity": "sha1-w1se+RjsPJkPmlvFe+BKrOxcgRY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "0.1.6"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-0.1.6.tgz",
+ "integrity": "sha1-qeEss66Nh2cn7u84Q/igiXtcmNY=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-data-descriptor": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-0.1.4.tgz",
+ "integrity": "sha1-C17mSDiOLIYCgueT8YVv7D8wG1Y=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-0.1.6.tgz",
+ "integrity": "sha512-avDYr0SB3DwO9zsMov0gKCESFYqCnE4hq/4z3TdUlukEy5t9C0YRq7HLrsN52NAcqXKaepeCD0n+B0arnVG3Hg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "0.1.6",
+ "is-data-descriptor": "0.1.4",
+ "kind-of": "5.1.0"
+ }
+ },
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ }
+ }
+ },
+ "to-regex-range": {
+ "version": "2.1.1",
+ "resolved": "https://registry.npmjs.org/to-regex-range/-/to-regex-range-2.1.1.tgz",
+ "integrity": "sha1-fIDBe53+vlmeJzZ+DU3VWQFB2zg=",
+ "dev": true,
+ "requires": {
+ "is-number": "3.0.0",
+ "repeat-string": "1.6.1"
+ },
+ "dependencies": {
+ "is-number": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/is-number/-/is-number-3.0.0.tgz",
+ "integrity": "sha1-JP1iAaR4LPUFYcgQJ2r8fRLXEZU=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ }
+ }
+ }
+ },
+ "tough-cookie": {
+ "version": "2.3.3",
+ "resolved": "https://registry.npmjs.org/tough-cookie/-/tough-cookie-2.3.3.tgz",
+ "integrity": "sha1-C2GKVWW23qkL80JdBNVe3EdadWE=",
+ "optional": true,
+ "requires": {
+ "punycode": "1.4.1"
+ }
+ },
+ "tunnel-agent": {
+ "version": "0.6.0",
+ "resolved": "https://registry.npmjs.org/tunnel-agent/-/tunnel-agent-0.6.0.tgz",
+ "integrity": "sha1-J6XeoGs2sEoKmWZ3SykIaPD8QP0=",
+ "optional": true,
+ "requires": {
+ "safe-buffer": "5.1.1"
}
},
"tweetnacl": {
- "version": "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.14.5.tgz",
+ "version": "0.14.5",
+ "resolved": "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.14.5.tgz",
"integrity": "sha1-WuaBd/GS1EViadEIr6k/+HQ/T2Q=",
"optional": true
},
+ "typical": {
+ "version": "2.6.1",
+ "resolved": "https://registry.npmjs.org/typical/-/typical-2.6.1.tgz",
+ "integrity": "sha1-XAgOXWYcu+OCWdLnCjxyU+hziB0=",
+ "dev": true
+ },
+ "uglify-js": {
+ "version": "2.3.6",
+ "resolved": "https://registry.npmjs.org/uglify-js/-/uglify-js-2.3.6.tgz",
+ "integrity": "sha1-+gmEdwtCi3qbKoBY9GNV0U/vIRo=",
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "async": "0.2.10",
+ "optimist": "0.3.7",
+ "source-map": "0.1.43"
+ },
+ "dependencies": {
+ "async": {
+ "version": "0.2.10",
+ "resolved": "https://registry.npmjs.org/async/-/async-0.2.10.tgz",
+ "integrity": "sha1-trvgsGdLnXGXCMo43owjfLUmw9E=",
+ "dev": true,
+ "optional": true
+ },
+ "optimist": {
+ "version": "0.3.7",
+ "resolved": "https://registry.npmjs.org/optimist/-/optimist-0.3.7.tgz",
+ "integrity": "sha1-yQlBrVnkJzMokjB00s8ufLxuwNk=",
+ "dev": true,
+ "optional": true,
+ "requires": {
+ "wordwrap": "0.0.3"
+ }
+ }
+ }
+ },
+ "uid-number": {
+ "version": "0.0.6",
+ "resolved": "https://registry.npmjs.org/uid-number/-/uid-number-0.0.6.tgz",
+ "integrity": "sha1-DqEOgDXo61uOREnwbaHHMGY7qoE=",
+ "optional": true
+ },
+ "unc-path-regex": {
+ "version": "0.1.2",
+ "resolved": "https://registry.npmjs.org/unc-path-regex/-/unc-path-regex-0.1.2.tgz",
+ "integrity": "sha1-5z3T17DXxe2G+6xrCufYxqadUPo="
+ },
+ "underscore": {
+ "version": "1.8.3",
+ "resolved": "https://registry.npmjs.org/underscore/-/underscore-1.8.3.tgz",
+ "integrity": "sha1-Tz+1OxBuYJf8+ctBCfKl6b36UCI=",
+ "dev": true
+ },
+ "underscore-contrib": {
+ "version": "0.3.0",
+ "resolved": "https://registry.npmjs.org/underscore-contrib/-/underscore-contrib-0.3.0.tgz",
+ "integrity": "sha1-ZltmwkeD+PorGMn4y7Dix9SMJsc=",
+ "dev": true,
+ "requires": {
+ "underscore": "1.6.0"
+ },
+ "dependencies": {
+ "underscore": {
+ "version": "1.6.0",
+ "resolved": "https://registry.npmjs.org/underscore/-/underscore-1.6.0.tgz",
+ "integrity": "sha1-izixDKze9jM3uLJOT/htRa6lKag=",
+ "dev": true
+ }
+ }
+ },
+ "union-value": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/union-value/-/union-value-1.0.0.tgz",
+ "integrity": "sha1-XHHDTLW61dzr4+oM0IIHulqhrqQ=",
+ "dev": true,
+ "requires": {
+ "arr-union": "3.1.0",
+ "get-value": "2.0.6",
+ "is-extendable": "0.1.1",
+ "set-value": "0.4.3"
+ },
+ "dependencies": {
+ "set-value": {
+ "version": "0.4.3",
+ "resolved": "https://registry.npmjs.org/set-value/-/set-value-0.4.3.tgz",
+ "integrity": "sha1-fbCPnT0i3H945Trzw79GZuzfzPE=",
+ "dev": true,
+ "requires": {
+ "extend-shallow": "2.0.1",
+ "is-extendable": "0.1.1",
+ "is-plain-object": "2.0.4",
+ "to-object-path": "0.3.0"
+ }
+ }
+ }
+ },
+ "unset-value": {
+ "version": "1.0.0",
+ "resolved": "https://registry.npmjs.org/unset-value/-/unset-value-1.0.0.tgz",
+ "integrity": "sha1-g3aHP30jNRef+x5vw6jtDfyKtVk=",
+ "dev": true,
+ "requires": {
+ "has-value": "0.3.1",
+ "isobject": "3.0.1"
+ },
+ "dependencies": {
+ "has-value": {
+ "version": "0.3.1",
+ "resolved": "https://registry.npmjs.org/has-value/-/has-value-0.3.1.tgz",
+ "integrity": "sha1-ex9YutpiyoJ+wKIHgCVlSEWZXh8=",
+ "dev": true,
+ "requires": {
+ "get-value": "2.0.6",
+ "has-values": "0.1.4",
+ "isobject": "2.1.0"
+ },
+ "dependencies": {
+ "isobject": {
+ "version": "2.1.0",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-2.1.0.tgz",
+ "integrity": "sha1-8GVWEJaj8dou9GJy+BXIQNh+DIk=",
+ "dev": true,
+ "requires": {
+ "isarray": "1.0.0"
+ }
+ }
+ }
+ },
+ "has-values": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/has-values/-/has-values-0.1.4.tgz",
+ "integrity": "sha1-bWHeldkd/Km5oCCJrThL/49it3E=",
+ "dev": true
+ },
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ }
+ }
+ },
+ "urix": {
+ "version": "0.1.0",
+ "resolved": "https://registry.npmjs.org/urix/-/urix-0.1.0.tgz",
+ "integrity": "sha1-2pN/emLiH+wf0Y1Js1wpNQZ6bHI=",
+ "dev": true
+ },
+ "usage-stats": {
+ "version": "0.9.4",
+ "resolved": "https://registry.npmjs.org/usage-stats/-/usage-stats-0.9.4.tgz",
+ "integrity": "sha512-u94pT+UDv+ZcjA5PT4KuMR67JL6VqeaQU6RN83Gf7yTqGrD/WqgCwhaj1DAKETR/KrteWXL0XZwlkDJuLJdtkg==",
+ "dev": true,
+ "requires": {
+ "array-back": "2.0.0",
+ "home-path": "1.0.5",
+ "mkdirp2": "1.0.3",
+ "req-then": "0.6.4",
+ "typical": "2.6.1",
+ "uuid": "3.1.0"
+ },
+ "dependencies": {
+ "array-back": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/array-back/-/array-back-2.0.0.tgz",
+ "integrity": "sha512-eJv4pLLufP3g5kcZry0j6WXpIbzYw9GUB4mVJZno9wfwiBxbizTnHCw3VJb07cBihbFX48Y7oSrW9y+gt4glyw==",
+ "dev": true,
+ "requires": {
+ "typical": "2.6.1"
+ }
+ }
+ }
+ },
+ "usb": {
+ "version": "1.3.1",
+ "resolved": "https://registry.npmjs.org/usb/-/usb-1.3.1.tgz",
+ "integrity": "sha1-tfjDYKU78o9cn7wS1kx/YeQ0arc=",
+ "optional": true,
+ "requires": {
+ "nan": "2.8.0",
+ "node-pre-gyp": "0.6.39"
+ },
+ "dependencies": {
+ "nan": {
+ "version": "2.8.0",
+ "resolved": "https://registry.npmjs.org/nan/-/nan-2.8.0.tgz",
+ "integrity": "sha1-7XFfP+neArV6XmJS2QqWZ14fCFo=",
+ "optional": true
+ }
+ }
+ },
+ "use": {
+ "version": "2.0.2",
+ "resolved": "https://registry.npmjs.org/use/-/use-2.0.2.tgz",
+ "integrity": "sha1-riig1y+TvyJCKhii43mZMRLeyOg=",
+ "dev": true,
+ "requires": {
+ "define-property": "0.2.5",
+ "isobject": "3.0.1",
+ "lazy-cache": "2.0.2"
+ },
+ "dependencies": {
+ "define-property": {
+ "version": "0.2.5",
+ "resolved": "https://registry.npmjs.org/define-property/-/define-property-0.2.5.tgz",
+ "integrity": "sha1-w1se+RjsPJkPmlvFe+BKrOxcgRY=",
+ "dev": true,
+ "requires": {
+ "is-descriptor": "0.1.6"
+ }
+ },
+ "is-accessor-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-accessor-descriptor/-/is-accessor-descriptor-0.1.6.tgz",
+ "integrity": "sha1-qeEss66Nh2cn7u84Q/igiXtcmNY=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-data-descriptor": {
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/is-data-descriptor/-/is-data-descriptor-0.1.4.tgz",
+ "integrity": "sha1-C17mSDiOLIYCgueT8YVv7D8wG1Y=",
+ "dev": true,
+ "requires": {
+ "kind-of": "3.2.2"
+ },
+ "dependencies": {
+ "kind-of": {
+ "version": "3.2.2",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz",
+ "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=",
+ "dev": true,
+ "requires": {
+ "is-buffer": "1.1.6"
+ }
+ }
+ }
+ },
+ "is-descriptor": {
+ "version": "0.1.6",
+ "resolved": "https://registry.npmjs.org/is-descriptor/-/is-descriptor-0.1.6.tgz",
+ "integrity": "sha512-avDYr0SB3DwO9zsMov0gKCESFYqCnE4hq/4z3TdUlukEy5t9C0YRq7HLrsN52NAcqXKaepeCD0n+B0arnVG3Hg==",
+ "dev": true,
+ "requires": {
+ "is-accessor-descriptor": "0.1.6",
+ "is-data-descriptor": "0.1.4",
+ "kind-of": "5.1.0"
+ }
+ },
+ "isobject": {
+ "version": "3.0.1",
+ "resolved": "https://registry.npmjs.org/isobject/-/isobject-3.0.1.tgz",
+ "integrity": "sha1-TkMekrEalzFjaqH5yNHMvP2reN8=",
+ "dev": true
+ },
+ "kind-of": {
+ "version": "5.1.0",
+ "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-5.1.0.tgz",
+ "integrity": "sha512-NGEErnH6F2vUuXDh+OlbcKW7/wOcfdRHaZ7VWtqCztfHri/++YKmP51OdWeGPuqCOba6kk2OTe5d02VmTB80Pw==",
+ "dev": true
+ }
+ }
+ },
"util-deprecate": {
- "version": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz",
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz",
"integrity": "sha1-RQ1Nyfpw3nMnYvvS1KKJgUGaDM8="
},
"uuid": {
- "version": "https://registry.npmjs.org/uuid/-/uuid-3.1.0.tgz",
- "integrity": "sha1-PdPT55Crwk17DToDT/q6vijrvAQ="
+ "version": "3.1.0",
+ "resolved": "https://registry.npmjs.org/uuid/-/uuid-3.1.0.tgz",
+ "integrity": "sha512-DIWtzUkw04M4k3bf1IcpS2tngXEL26YUD2M0tMDUpnUrz2hgzUBlD55a4FjdLGPvfHxS6uluGWvaVEqgBcVa+g=="
},
"vasync": {
- "version": "https://registry.npmjs.org/vasync/-/vasync-1.6.4.tgz",
+ "version": "1.6.4",
+ "resolved": "https://registry.npmjs.org/vasync/-/vasync-1.6.4.tgz",
"integrity": "sha1-3+k2Fq0OeugBszKp2Iv8XNyOHR8=",
"requires": {
- "verror": "https://registry.npmjs.org/verror/-/verror-1.6.0.tgz"
+ "verror": "1.6.0"
},
"dependencies": {
"extsprintf": {
- "version": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.2.0.tgz",
+ "version": "1.2.0",
+ "resolved": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.2.0.tgz",
"integrity": "sha1-WtlGwi9bMrp/jNdCZxHG6KP8JSk="
},
"verror": {
- "version": "https://registry.npmjs.org/verror/-/verror-1.6.0.tgz",
+ "version": "1.6.0",
+ "resolved": "https://registry.npmjs.org/verror/-/verror-1.6.0.tgz",
"integrity": "sha1-fROyex+swuLakEBetepuW90lLqU=",
"requires": {
- "extsprintf": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.2.0.tgz"
+ "extsprintf": "1.2.0"
}
}
}
},
"verror": {
- "version": "https://registry.npmjs.org/verror/-/verror-1.10.0.tgz",
+ "version": "1.10.0",
+ "resolved": "https://registry.npmjs.org/verror/-/verror-1.10.0.tgz",
"integrity": "sha1-OhBcoXBTr1XW4nDB+CiGguGNpAA=",
"requires": {
- "assert-plus": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz",
- "core-util-is": "https://registry.npmjs.org/core-util-is/-/core-util-is-1.0.2.tgz",
- "extsprintf": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.3.0.tgz"
+ "assert-plus": "1.0.0",
+ "core-util-is": "1.0.2",
+ "extsprintf": "1.3.0"
+ }
+ },
+ "walk-back": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/walk-back/-/walk-back-2.0.1.tgz",
+ "integrity": "sha1-VU4qnYdPrEeoywBr9EwvDEmYoKQ=",
+ "dev": true
+ },
+ "walk-sync": {
+ "version": "0.3.2",
+ "resolved": "https://registry.npmjs.org/walk-sync/-/walk-sync-0.3.2.tgz",
+ "integrity": "sha512-FMB5VqpLqOCcqrzA9okZFc0wq0Qbmdm396qJxvQZhDpyu0W95G9JCmp74tx7iyYnyOcBtUuKJsgIKAqjozvmmQ==",
+ "dev": true,
+ "requires": {
+ "ensure-posix-path": "1.0.2",
+ "matcher-collection": "1.0.5"
}
},
"wbuf": {
- "version": "https://registry.npmjs.org/wbuf/-/wbuf-1.7.2.tgz",
+ "version": "1.7.2",
+ "resolved": "https://registry.npmjs.org/wbuf/-/wbuf-1.7.2.tgz",
"integrity": "sha1-1pe5nx9ZUS3ydRvkJ2nBWAtYAf4=",
"requires": {
- "minimalistic-assert": "https://registry.npmjs.org/minimalistic-assert/-/minimalistic-assert-1.0.0.tgz"
+ "minimalistic-assert": "1.0.0"
+ }
+ },
+ "which": {
+ "version": "1.3.0",
+ "resolved": "https://registry.npmjs.org/which/-/which-1.3.0.tgz",
+ "integrity": "sha512-xcJpopdamTuY5duC/KnTTNBraPK54YwpenP4lzxU8H91GudWpFv38u0CKjclE1Wi2EH2EDz5LRcHcKbCIzqGyg==",
+ "dev": true,
+ "requires": {
+ "isexe": "2.0.0"
+ }
+ },
+ "wide-align": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/wide-align/-/wide-align-1.1.2.tgz",
+ "integrity": "sha512-ijDLlyQ7s6x1JgCLur53osjm/UXUYD9+0PbYKrBsYisYXzCxN+HC3mYDNy/dWdmf3AwqwU3CXwDCvsNgGK1S0w==",
+ "optional": true,
+ "requires": {
+ "string-width": "1.0.2"
}
},
"winston": {
@@ -617,20 +5624,39 @@
"stack-trace": "0.0.10"
}
},
+ "wordwrap": {
+ "version": "0.0.3",
+ "resolved": "https://registry.npmjs.org/wordwrap/-/wordwrap-0.0.3.tgz",
+ "integrity": "sha1-o9XabNXAvAAI03I0u68b7WMFkQc=",
+ "dev": true
+ },
+ "wordwrapjs": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/wordwrapjs/-/wordwrapjs-3.0.0.tgz",
+ "integrity": "sha512-mO8XtqyPvykVCsrwj5MlOVWvSnCdT+C+QVbm6blradR7JExAhbkZ7hZ9A+9NUtwzSqrlUo9a67ws0EiILrvRpw==",
+ "dev": true,
+ "requires": {
+ "reduce-flatten": "1.0.1",
+ "typical": "2.6.1"
+ }
+ },
"wrappy": {
- "version": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz",
"integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8="
},
"xpc-connection": {
- "version": "https://registry.npmjs.org/xpc-connection/-/xpc-connection-0.1.4.tgz",
+ "version": "0.1.4",
+ "resolved": "https://registry.npmjs.org/xpc-connection/-/xpc-connection-0.1.4.tgz",
"integrity": "sha1-3Nf6oq7Gt6bhjMXdrQQvejTHcVY=",
"optional": true,
"requires": {
- "nan": "https://registry.npmjs.org/nan/-/nan-2.6.2.tgz"
+ "nan": "2.6.2"
}
},
"yallist": {
- "version": "https://registry.npmjs.org/yallist/-/yallist-2.1.2.tgz",
+ "version": "2.1.2",
+ "resolved": "https://registry.npmjs.org/yallist/-/yallist-2.1.2.tgz",
"integrity": "sha1-HBH5IY8HYImkfdUS+TxmmaaoHVI="
}
}
diff --git a/package.json b/package.json
index 8b065f7..aa6a769 100644
--- a/package.json
+++ b/package.json
@@ -1,10 +1,11 @@
{
"name": "intval3",
- "version": "0.0.1",
+ "version": "3.0.1",
"description": "Intervalometer for the Bolex",
"main": "index.js",
"scripts": {
- "test": "echo \"Error: no test specified\" && exit 1"
+ "test": "./node_modules/.bin/qunit",
+ "docs": "sh docs.sh"
},
"repository": {
"type": "git",
@@ -27,8 +28,17 @@
"cron": "^1.2.1",
"gpio": "^0.2.7",
"node-ipc": "^9.1.0",
+ "node-persist": "^2.1.0",
+ "onoff": "^1.1.5",
"restify": "^5.2.0",
+ "rpio": "^0.9.20",
+ "sqlite3": "^3.1.13",
+ "squel": "^5.12.0",
"uuid": "^3.1.0",
"winston": "^2.3.1"
+ },
+ "devDependencies": {
+ "jsdoc-to-markdown": "^3.0.0",
+ "qunit": "^2.5.0"
}
}
diff --git a/process.json b/process.json
index ca00b64..c38a3d6 100644
--- a/process.json
+++ b/process.json
@@ -1,12 +1,12 @@
{
"apps" : [
{
- "name" : "ble",
- "script" : "./services/bluetooth/index.js",
+ "name" : "intval3",
+ "script" : "./index.js",
"watch" : false,
"env" : {
"BLENO_DEVICE_NAME" : "intval3",
- "DEVICE_ID" : "intval3",
+ "DEVICE_NAME" : "intval3",
"SERVICE_ID" : "149582bd-d49d-4b5c-acd1-1ae503d09e7a",
"CHAR_ID" : "47bf69fb-f62f-4ef8-9be8-eb727a54fae4",
"WIFI_ID" : "3fe7d9cf-7bd2-4ff0-97c5-ebe87288c2cc",
diff --git a/scripts/blootstrap-deps.sh b/scripts/intval3-deps.sh
similarity index 62%
rename from scripts/blootstrap-deps.sh
rename to scripts/intval3-deps.sh
index 90a92f3..299217b 100644
--- a/scripts/blootstrap-deps.sh
+++ b/scripts/intval3-deps.sh
@@ -1,17 +1,17 @@
#!/bin/bash
-echo "Running blootstrap install script"
+echo "Running intval3 dependency install script"
apt-get update
-apt-get install git ufw nginx -y
+apt-get install git ufw nginx jq -y
echo "Installing node.js dependencies.."
apt-get install nodejs npm -y
npm install -g n
n latest
npm install -g npm@latest
-npm install -g pm2
+npm install -g pm2 node-gyp
echo "Installing bluetooth dependencies..."
apt-get install bluetooth bluez libbluetooth-dev libudev-dev -y
-echo "Finished installing blootstrap dependencies"
\ No newline at end of file
+echo "Finished installing intval3 dependencies"
\ No newline at end of file
diff --git a/scripts/blootstrap-install.sh b/scripts/intval3-install.sh
similarity index 57%
rename from scripts/blootstrap-install.sh
rename to scripts/intval3-install.sh
index 8e3258b..06430fe 100644
--- a/scripts/blootstrap-install.sh
+++ b/scripts/intval3-install.sh
@@ -1,18 +1,20 @@
#!/bin/bash
-echo "Running blootstrap install script"
+echo "Running intval3 install script"
apt-get update
-apt-get install git ufw nginx -y
+apt-get install git ufw nginx jq -y
echo "Installing node.js dependencies.."
apt-get install nodejs npm -y
npm install -g n
-n latest
+n 9.1.0
npm install -g npm@latest
-npm install -g pm2
+npm install -g pm2 node-gyp
echo "Installing bluetooth dependencies..."
apt-get install bluetooth bluez libbluetooth-dev libudev-dev -y
+systemctl disable bluetooth
+hciconfig hci0 up
echo "Configuring ufw (firewall)..."
ufw default deny incoming
@@ -22,13 +24,13 @@ ufw allow http
ufw allow https
ufw enable
-echo "Installing blootstrap project..."
-wget https://github.com/mattmcw/blootstrap/archive/master.zip
-unzip master.zip -d blootstrap/
+echo "Installing intval3 project..."
+wget https://github.com/sixteenmillimeter/intval3/archive/master.zip
+unzip master.zip -d intval3/
rm master.zip
-cd blootstrap
+cd intval3
npm install
pm2 start process.json
-echo "Finished installing blootstrap"
\ No newline at end of file
+echo "Finished installing intval3"
\ No newline at end of file
diff --git a/scripts/sequence.sh b/scripts/sequence.sh
new file mode 100644
index 0000000..c2abdb9
--- /dev/null
+++ b/scripts/sequence.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+URL=$1
+COUNTER=0
+FRAMES=25
+while [ $COUNTER -lt $FRAMES ]; do
+ echo The counter is $COUNTER
+ curl "$URL/frame"
+ sleep 60
+ ((COUNTER++))
+done
diff --git a/scripts/update.sh b/scripts/update.sh
new file mode 100644
index 0000000..a866bc5
--- /dev/null
+++ b/scripts/update.sh
@@ -0,0 +1,5 @@
+#!/bin/bash
+
+sudo -u pi -i<< EOF
+ cd /home/pi/intval3 && git pull
+EOF
\ No newline at end of file
diff --git a/services/bluetooth/index.js b/services/bluetooth/index.js
deleted file mode 100644
index 8fbe53a..0000000
--- a/services/bluetooth/index.js
+++ /dev/null
@@ -1,160 +0,0 @@
-'use strict'
-
-const ipc = require('node-ipc')
-const os = require('os')
-const bleno = require('bleno')
-const util = require('util')
-const wifi = require('../../lib/wifi')
-
-const BLENO_DEVICE_NAME = process.env.BLENO_DEVICE_NAME || 'my_project'
-const DEVICE_ID = process.env.DEVICE_ID || 'my_project_id'
-const SERVICE_ID = process.env.SERVICE_ID || 'blootstrap'
-const CHAR_ID = process.env.CHAR_ID || 'blootstrapchar'
-const WIFI_ID = process.env.WIFI_ID || 'blootstrapwifi'
-const NETWORK = os.networkInterfaces()
-const MAC = getMac() || spoofMac()
-
-let currentWifi = 'disconnected'
-
-const chars = []
-
-ipc.config.id = 'blootstrap_ble'
-ipc.config.retry = 1500
-ipc.config.rawBuffer = true
-ipc.config.encoding = 'hex'
-
-function createChar(name, uuid, prop, write, read) {
- function characteristic () {
- bleno.Characteristic.call(this, {
- uuid : uuid,
- properties: prop
- })
- }
- util.inherits(characteristic, bleno.Characteristic)
- if (prop.indexOf('read') !== -1) {
- //data, offset, withoutResponse, callback
- characteristic.prototype.onReadRequest = read
- }
- if (prop.indexOf('write') !== -1) {
- characteristic.prototype.onWriteRequest = write
- }
- chars.push(new characteristic())
-}
-
-function createChars () {
- createChar('wifi', WIFI_ID, ['read', 'write'], onWifiWrite, onWifiRead)
-}
-
-function onWifiWrite (data, offset, withoutResponse, callback) {
- let result
- let utf8
- let obj
- let ssid
- let pwd
- if (offset) {
- console.warn(`Offset scenario`)
- result = bleno.Characteristic.RESULT_ATTR_NOT_LONG
- return callback(result)
- }
- utf8 = data.toString('utf8')
- obj = JSON.parse(utf8)
- ssid = obj.ssid
- pwd = obj.pwd
- console.log(`Connecting to AP: ${ssid}...`)
- return wifi.setNetwork(ssid, pwd, (err, data) => {
- if (err) {
- console.error('Error configuring wifi', err)
- result = bleno.Characteristic.RESULT_UNLIKELY_ERROR
- return callback(result)
- }
- currentWifi = ssid
- console.log(`Connected to ${ssid}`)
- result = bleno.Characteristic.RESULT_SUCCESS
- return callback(result)
- })
-}
-
-function onWifiRead (offset, callback) {
- const result = bleno.Characteristic.RESULT_SUCCESS
- const data = new Buffer(JSON.stringify(currentWifi))
- callback(result, data.slice(offset, data.length))
-}
-
-function getMac () {
- const colonRe = new RegExp(':', 'g')
- if (NETWORK && NETWORK.wlan0 && NETWORK.wlan0[0] && NETWORK.wlan0[0].mac) {
- return NETWORK.wlan0[0].mac.replace(colonRe, '')
- }
- return undefined
-}
-
-function spoofMac () {
- const fs = require('fs')
- const FSPATH = require.resolve('uuid')
- const IDFILE = os.homedir() + '/.intval3id'
- let uuid
- let UUIDPATH
- let TMP
- let MACTMP
- let dashRe
- delete require.cache[FSPATH]
- if (fs.existsSync(IDFILE)) {
- return fs.readFileSync(IDFILE, 'utf8')
- }
- uuid = require('uuid').v4
- UUIDPATH = require.resolve('uuid')
- delete require.cache[UUIDPATH]
- TMP = uuid()
- MACTMP = TMP.replace(dashRe, '').substring(0, 12)
- dashRe = new RegExp('-', 'g')
- fs.writeFileSync(IDFILE, MACTMP, 'utf8')
- return MACTMP
-}
-
-console.log('Starting bluetooth service')
-
-bleno.on('stateChange', state => {
- const BLE_ID = `${DEVICE_ID}_${MAC}`
- console.log(`on -> stateChange: ${state}`)
- if (state === 'poweredOn') {
- console.log(`Started advertising BLE serveses as ${BLE_ID}`)
- bleno.startAdvertising(BLENO_DEVICE_NAME, [BLE_ID])
- } else {
- bleno.stopAdvertising()
- }
-})
-
-bleno.on('advertisingStart', err => {
- console.log('on -> advertisingStart: ' + (err ? 'error ' + err : 'success'))
- createChars()
- if (!err) {
- bleno.setServices([
- new bleno.PrimaryService({
- uuid : SERVICE_ID, //hardcoded across panels
- characteristics : chars
- })
- ])
- }
-})
-
-bleno.on('accept', clientAddress => {
- console.log(`${clientAddress} accepted`)
-})
-
-bleno.on('disconnect', clientAddress => {
- console.log(`${clientAddress} disconnected`)
-})
-
-ipc.serve(() => {
- ipc.server.on('connect', socket => {
- ipc.log('Client connected to socket')
- })
- ipc.server.on('disconnect', () => {
- ipc.log('Client disconnected from socket')
- })
- ipc.server.on('data', (data, socket) => {
- ipc.server.emit(socket, JSON.stringify({}))
- })
-})
-
-ipc.server.start()
\ No newline at end of file
diff --git a/test/index.js b/test/index.js
new file mode 100644
index 0000000..0608d59
--- /dev/null
+++ b/test/index.js
@@ -0,0 +1,16 @@
+'use strict'
+
+QUnit.test('hello world', function (assert) {
+ assert.ok(true, 'this is true')
+})
+
+//sequence tests
+//db tests
+//onoffsim
+
+//intval tests
+//ble tests
+//mscript tests
+//wifi tests
+
+//log tests (tricky)
\ No newline at end of file