diff --git a/Readme.md b/Readme.md index f0ab4f0..ddf6810 100644 --- a/Readme.md +++ b/Readme.md @@ -41,8 +41,13 @@ As a function of the firmware, there is an embedded web application that is host All of the non-electronic hardware is generated from OpenSCAD scripts and built into either STL files for 3D printing or DXF files for laser cutting or CNCing. -Electronics designs are available in the form of a Fritzing file, a wiring diagram and a mask image that can be used to fabricate a board from a blank PCB. One of the easiest ways to +Electronics designs are available in the form of a Fritzing file, Gerber files, a wiring diagram and a mask image that can be used to fabricate a board from a blank PCB. +Prototype of the bare PCB of the "bonnet" for the Raspberry Pi Zero W are available for order from OSH Park. See the parts list below for components for this board. + +Order INTVAL3 Bonnet from OSH Park + +
## PARTS @@ -52,4 +57,9 @@ Electronics designs are available in the form of a Fritzing file, a wiring diagr 3. 120RPM 12VDC Motor - ? 4. Microswitch w/ Roller - [[Adafruit](https://www.adafruit.com/product/819)] 5. L7805 5V Regulator - [[Adafruit](https://www.adafruit.com/product/2164)] [Sparkfun](https://www.sparkfun.com/products/107)] -6. (Optional) Proto Bonnet - [[Adafruit](https://www.adafruit.com/product/3203)] \ No newline at end of file +6. 2x Thru-hole Resistors - 330 Ohm +7. 2x Thru-hole Capacitors - 100nF +9. 4x Terminal blocks + +* (Optional) Proto Bonnet - [[Adafruit](https://www.adafruit.com/product/3203)] +* (Optional) INTVAL3 Bonnet - [[OSH Park](https://oshpark.com/shared_projects/SkPyOK5S)]