Printable panel cover. Delete original intval1 design.
This commit is contained in:
parent
c99a6166c0
commit
873093fa4c
|
|
@ -243,7 +243,7 @@ module bearing_laser (x, y, z, width= 8, hole = true) {
|
|||
}
|
||||
}
|
||||
|
||||
module intval_laser_panel_cover (LASER = false, DEBUG = false, ALL_RED = false, PCB = false) {
|
||||
module intval_laser_panel_cover (LASER = false, DEBUG = false, ALL_RED = false, PCB = false, buttons = true) {
|
||||
$fn = 60;
|
||||
cover_h = 16 + 3 + 4 + 15;
|
||||
MATERIAL = 25.4 / 8;
|
||||
|
|
@ -266,17 +266,19 @@ module intval_laser_panel_cover (LASER = false, DEBUG = false, ALL_RED = false,
|
|||
translate ([8, -9, height + 3.5]) cylinder(r = bolt_inner - .5, h = 50, center = true); //standoff hole
|
||||
|
||||
//buttons
|
||||
translate ([-44, -23, 0]) {
|
||||
rotate ([0, 0, 90-13]) {
|
||||
if (ALL_RED) {
|
||||
translate([7, -32, 8]) cylinder(r = 3.5, h = 190, center = true);
|
||||
translate([7, -19, 8]) cylinder(r = 3.5, h = 190, center = true);
|
||||
} else {
|
||||
translate([7, -32, 8]) cylinder(r = 3.1, h = 190, center = true);
|
||||
translate([7, -19, 8]) cylinder(r = 3.1, h = 190, center = true);
|
||||
}
|
||||
if (buttons) {
|
||||
translate ([-44, -23, 0]) {
|
||||
rotate ([0, 0, 90-13]) {
|
||||
if (ALL_RED) {
|
||||
translate([7, -32, 8]) cylinder(r = 3.5, h = 190, center = true);
|
||||
translate([7, -19, 8]) cylinder(r = 3.5, h = 190, center = true);
|
||||
} else {
|
||||
translate([7, -32, 8]) cylinder(r = 3.1, h = 190, center = true);
|
||||
translate([7, -19, 8]) cylinder(r = 3.1, h = 190, center = true);
|
||||
}
|
||||
|
||||
translate([7, -5, 8]) cylinder(r = 3.5, h = 190, center = true);
|
||||
translate([7, -5, 8]) cylinder(r = 3.5, h = 190, center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -340,7 +342,7 @@ module intval_laser_panel_cover (LASER = false, DEBUG = false, ALL_RED = false,
|
|||
translate([0, 80 + 10, 0]) rotate([0, 0, -13]) projection() top_side();
|
||||
translate([0, -80 - 10, 0]) rotate([0, 0, -13]) projection() bottom_side();
|
||||
} else {
|
||||
translate([0, 0, height + cover_h]) top();
|
||||
translate([0, 0, height + cover_h + 0.325]) top();
|
||||
if (!DEBUG) {
|
||||
translate([-44, 8, height + (cover_h / 2 ) - 4.25]) rotate([0, 0, -13]) rotate([0, 90, 0]) back_side();
|
||||
}
|
||||
|
|
@ -851,7 +853,7 @@ module geared_motor_mount_reinforced () {
|
|||
//translate([0, 0, -5]) cube([3.75, 3.75, 3.75], center = true);
|
||||
}
|
||||
|
||||
module motor_mount_bottom (DECOYS = false) {
|
||||
module motor_mount_bottom () {
|
||||
$fn = 60;
|
||||
mount_d = 45;
|
||||
base_d = 45;
|
||||
|
|
@ -860,6 +862,7 @@ module motor_mount_bottom (DECOYS = false) {
|
|||
bolt_h = 22.3;
|
||||
shelf_h = 6; //match to motor_mount
|
||||
screw_d = 4;
|
||||
panel_h = 19 + 3.5 + 4 + 20;
|
||||
module motor_mount_core () {
|
||||
translate ([one_to_one_x, one_to_one_y, (height / 2 ) + 5.75]) {
|
||||
difference() {
|
||||
|
|
@ -911,24 +914,17 @@ module motor_mount_bottom (DECOYS = false) {
|
|||
module panel_attachment () {
|
||||
difference () {
|
||||
union() {
|
||||
translate([0, 0, 2]) cylinder(r = 7/2, h = height - shelf_h, center = true);
|
||||
translate([3.5, 0, 0]) cube([7, 7, height - shelf_h - 4], center = true);
|
||||
translate([0, 0, 2]) cylinder(r = 10/2, h = panel_h - shelf_h, center = true);
|
||||
translate([3.5, 0, -10]) cube([7, 7, height - shelf_h - 4], center = true);
|
||||
}
|
||||
cylinder(r = 3.2/2, h = height, center = true);
|
||||
cylinder(r = 3.2/2, h = panel_h, center = true);
|
||||
}
|
||||
}
|
||||
translate([8, -9, (height - shelf_h) / 2 + 3.75]) panel_attachment();
|
||||
translate([8, -9, (panel_h - shelf_h) / 2 + 3.75]) panel_attachment();
|
||||
motor_mount_core();
|
||||
microswitch_holder();
|
||||
bolt_holder([mm_x[2], mm_y[2], ((height - shelf_h)/ 2) + 3.75], 0, height - shelf_h - 4, 6); //bottom left mount
|
||||
bolt_holder([mm_x[3], mm_y[3], ((height - shelf_h)/ 2) + 3.75], 180, height - shelf_h - 4, 6); //bottom right mount
|
||||
if (DECOYS) {
|
||||
difference () {
|
||||
translate([35, 0 , 0]) decoys(44, 8, 6);
|
||||
}
|
||||
translate([0, 0, 8]) cube([4, 4, 4], center = true);
|
||||
translate([40, 55, 8]) cube([4, 4, 4], center = true);
|
||||
}
|
||||
}
|
||||
module bolt_holder (position = [0, 0, 0], rotate_z = 0, h = 17, length = 4.5, hole = true, tight = 0) {
|
||||
bolt_r = 6;
|
||||
|
|
@ -1095,49 +1091,13 @@ module metro_mount (decoys = false) {
|
|||
}
|
||||
}
|
||||
|
||||
module panel_cover (DECOYS = false) {
|
||||
$fn = 60;
|
||||
HEIGHT = 85;
|
||||
WIDTH = 37;
|
||||
z = 25 + 8 + 5;
|
||||
translate([0, 0, (z/2) + 9.5]) {
|
||||
difference () {
|
||||
union () {
|
||||
difference () {
|
||||
rounded_cube([WIDTH, HEIGHT, z], d = 20, center = true); //main body of case
|
||||
translate([0, 0, -1]) rounded_cube([WIDTH - 4, HEIGHT - 4, z-2], d = 18, center = true);
|
||||
translate([-5, 35, 5]) rotate([0, 0, 15]) cube([50, 25, 400], center = true); //heatsink
|
||||
translate([-10, 12, -9]) rotate([0, 0, 13]) cube([70, 40, 20], center = true); //L289N hole
|
||||
translate([13, -36, -15]) rotate([0, 0, 13])cube([24, 45, 8], center = true); //trinket
|
||||
//buttons
|
||||
translate([7, -32, 8]) cylinder(r = 3.1, h = 190, center = true);
|
||||
translate([7, -19, 8]) cylinder(r = 3.1, h = 190, center = true);
|
||||
translate([7, -5, 8]) cylinder(r = 3.1, h = 190, center = true);
|
||||
|
||||
translate([-20, -30, 0]) rotate([90, 0, 90]) cylinder(r = 1.75, h = 10, center = true); //hole for trigger cable
|
||||
translate([-20, -30, -19]) cube([15, 0.5, 40], center = true);
|
||||
translate([-15, -20, 0]) rotate([90, 0, 90]) cylinder(r = 3.1, h = 19, center = true); //power
|
||||
module printed_panel_cover () {
|
||||
intval_laser_panel_cover(buttons = false);
|
||||
}
|
||||
|
||||
translate([-5, -12, 7]) cylinder(r= 2, h = z + 5, center= true); //LED
|
||||
}
|
||||
// translate([-5, -26.5, 0]) cylinder(r = 5, h = z, center = true);
|
||||
}
|
||||
translate([-5, -26.5, 0]) cylinder(r = 4, h = z + 10, center = true); //access hole for
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
//decoys
|
||||
if (DECOYS){
|
||||
DECOY_H = 40.5;
|
||||
DECOY_W = 28;
|
||||
translate([DECOY_W, 33, DECOY_H]) cube([4, 4, 4], center = true);
|
||||
translate([DECOY_W, -40, DECOY_H]) cube([4, 4, 4], center = true);
|
||||
translate([-DECOY_W, 20, DECOY_H]) cube([4, 4, 4], center = true);
|
||||
translate([-DECOY_W, -40, DECOY_H]) cube([4, 4, 4], center = true);
|
||||
translate([-DECOY_W, -10, DECOY_H]) cube([4, 4, 4], center = true);
|
||||
translate([DECOY_W, -10, DECOY_H]) cube([4, 4, 4], center = true);
|
||||
}
|
||||
module printed_panel_cover_buttons () {
|
||||
intval_laser_panel_cover(buttons = true);
|
||||
}
|
||||
|
||||
module button_nuts () {
|
||||
|
|
@ -1165,7 +1125,7 @@ module button_nuts_plate (decoys = false) {
|
|||
}
|
||||
|
||||
module intval_electronics_mount (TYPE = "TRINKET", MOD_Y = 5, MOD_MOUNT = 0) {
|
||||
translate([-40 + 2, -1, 14]) rotate([0, 0, -13]) l289N_mount(MOD_MOUNT=MOD_MOUNT);
|
||||
translate([-40 + 2, -1, 14]) rotate([0, 0, -13]) l289N_mount();
|
||||
if (TYPE == "TRINKET") {
|
||||
translate([-26 + 2, -19 - MOD_Y + 1, 11.25]) rotate([0, 0, -180 - 13]) trinket_mount();
|
||||
} else if (TYPE == "METRO") {
|
||||
|
|
@ -1318,7 +1278,7 @@ module exploded_view () {
|
|||
|
||||
//exploded_view();
|
||||
|
||||
PART = "printed_panel";
|
||||
PART = "printed_panel_cover_buttons";
|
||||
|
||||
//models
|
||||
|
||||
|
|
@ -1372,6 +1332,12 @@ if (PART == "plate") {
|
|||
l289N_mount();
|
||||
} else if (PART == "printed_panel") {
|
||||
intval_panel_printed();
|
||||
} else if (PART == "printed_panel_cover") {
|
||||
printed_panel_cover();
|
||||
} else if (PART == "printed_panel_cover_buttons") {
|
||||
printed_panel_cover_buttons();
|
||||
} else if (PART == "debug") {
|
||||
exploded_view();
|
||||
}
|
||||
|
||||
//laser
|
||||
|
|
|
|||
Loading…
Reference in New Issue