Add first pass at assembly documentation
Include rough draft of assembly instructions Establish structure to be backed up with images
This commit is contained in:
Matt
parent
3915fe9ba0
commit
4f31097051
107
Readme.md
107
Readme.md
|
|
@ -6,13 +6,12 @@
|
||||||
2. [Attachment](#Attachment)
|
2. [Attachment](#Attachment)
|
||||||
3. [Usage](#Usage)
|
3. [Usage](#Usage)
|
||||||
4. [Power](#Power)
|
4. [Power](#Power)
|
||||||
5. [Maintainance](#Maintainance)
|
5. [Creating Your Own](#Creating)
|
||||||
6. [Assembly](#Assembly)
|
|
||||||
|
|
||||||
----
|
----
|
||||||
### 1) <a name="Overview"></a>Overview
|
### 1) <a name="Overview"></a>Overview
|
||||||
|
|
||||||
The INTVAL 2.0 is an open-source/hardware intervalometer for Bolex
|
The INTVAL 2.0 is an open-source open-hardware intervalometer for Bolex
|
||||||
16mm cameras. It enables you to expose single frames of film
|
16mm cameras. It enables you to expose single frames of film
|
||||||
at a regulated interval. Utilizing the 1:1 shaft in Bolex cameras (Rex
|
at a regulated interval. Utilizing the 1:1 shaft in Bolex cameras (Rex
|
||||||
3 and later models) the INTVAL 2.0 can complete a full rotation of the shutter
|
3 and later models) the INTVAL 2.0 can complete a full rotation of the shutter
|
||||||
|
|
@ -55,30 +54,102 @@ Delay refers to the time the intervalometer pauses between frames and only matte
|
||||||
Power the INTVAL 2.0 with 12VDC to the 2.1mm DC power jack located on the bottom of the case.
|
Power the INTVAL 2.0 with 12VDC to the 2.1mm DC power jack located on the bottom of the case.
|
||||||
The maximum draw of the motor is under 1 Amp, so that much current should be ample to run the
|
The maximum draw of the motor is under 1 Amp, so that much current should be ample to run the
|
||||||
intervalometer. Portable batteries, such as those used as supplimental cellphone power supplies,
|
intervalometer. Portable batteries, such as those used as supplimental cellphone power supplies,
|
||||||
can be used to as mobile power sources, but they must be able to provide 12V and not the typical 5V that many of these batteries provide. Two examples:
|
can be used to as mobile power sources, but they must be able to provide 12V and not the typical 5V that many of these batteries provide.
|
||||||
|
|
||||||
|
Two examples:
|
||||||
|
|
||||||
[Anker 2nd Gen Astro Pro2 20000mAh 4-Port Aluminum Portable External Battery Charger with 9V/12V Multi-Voltage Port](http://www.amazon.com/gp/product/B005NGLTZQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B005NGLTZQ&linkCode=as2&tag=sixteentools-20&linkId=HXO6TQG5JADIRZCZ)
|
[Anker 2nd Gen Astro Pro2 20000mAh 4-Port Aluminum Portable External Battery Charger with 9V/12V Multi-Voltage Port](http://www.amazon.com/gp/product/B005NGLTZQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B005NGLTZQ&linkCode=as2&tag=sixteentools-20&linkId=HXO6TQG5JADIRZCZ)
|
||||||
|
|
||||||
[ Rechargeable 3800mAh Lithium Ion Battery Pack with DC Connector, 12 volt](http://www.amazon.com/gp/product/B007RQW5WG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B007RQW5WG&linkCode=as2&tag=sixteentools-20&linkId=JJV427F7SOAMASZV)
|
[ Rechargeable 3800mAh Lithium Ion Battery Pack with DC Connector, 12 volt](http://www.amazon.com/gp/product/B007RQW5WG/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B007RQW5WG&linkCode=as2&tag=sixteentools-20&linkId=JJV427F7SOAMASZV)
|
||||||
|
|
||||||
----
|
12V wall warts that can provide 1 Amp or over are also viable options for shooting in a controlled environment.
|
||||||
### 5) <a name="Maintainance"></a>Maintainance
|
|
||||||
|
|
||||||
----
|
----
|
||||||
### 6) <a name="Assembly"></a>Assembly
|
### 5) <a name="Creating"></a>Creating Your Own
|
||||||
|
|
||||||
All parts of the INTVAL 2.0 are reproducible via 3D printing, laser cutting or purchasable for a total build cost of ~$50. The files in this repository consist of .SCAD, .STL, .DXF and .INO files. The .SCAD files contain all the elements needed to generate the physical body of the intervalometer with .DXF files for
|
All parts of the INTVAL 2.0 are reproducible via 3D printing, laser cutting or are purchasable (example links are to Amazon or [Adafruit](http://adafruit.com)) for a total build cost of ~$50. The files in this repository consist of .SCAD, .STL, .DXF and .INO files. The .SCAD files contain all the elements needed to generate the physical body of the intervalometer with .DXF files for
|
||||||
laser cutting and .STL files for 3D printing. The .INO file contains the source code for the Arduino sketch
|
laser cutting and .STL files for 3D printing. The .INO file contains the source code for the Arduino sketch that powers the INTVAL 2.0.
|
||||||
that powers the INTVAL 2.0.
|
|
||||||
|
#### A. 3D Printing
|
||||||
|
|
||||||
|
The most time-consuming part of this build *should* be 3D printing the parts for the INTVAL 2.0. Depending on the size of your printing bed it is most likely possible to print all parts in one convenient plate. As will be addressed later, the laser-cuttable elements can also be 3D printed if you lack access to a laser cutter.
|
||||||
|
|
||||||
|
In the ``/dist`` directory of the repo, you will find all of the .STL files needed to build the intervalometer. If needed, the .SCAD file can be used to generate additional .STL models, or it can be modified to produce unique parts to your own specifications.
|
||||||
|
|
||||||
|
The most delicate and integral piece to be fabricated on a 3D printer is the ``motor_key``, which interfaces the intervalometer to the 1:1 shaft of the Bolex. This part should be printed as close to solid as your printer allows or you should look at a third-party printing service to have it made from stronger materials than the typical PLA or ABS used by most home printers. That said, I have used an ABS-printed motor key extensively with no issues thus far.
|
||||||
|
|
||||||
|
#### B. Laser Cutting
|
||||||
|
|
||||||
|
The INTVAL 2.0 has a flat panel on which all parts and electronics are mounted. For this reason, and to reduce production time, a laser cutting component has been added. See the much earlier--and now deprecated--attempt to have an entirely printable model in the original [INTVAL](https://github.com/sixteenmillimeter/INTVAL) (or [INTVAL Next](http://www.thingiverse.com/thing:151944) as I had taken to calling it on [Thingiverse](http://thingiverse.com)). Printing the flat base of this version took upwards of 3 hours on my modest printer, and with the accessibility of laser cutters at hacker/maker spaces becoming more common I decided this was feasible to include in my design.
|
||||||
|
|
||||||
|
Important to note: **A laser cutter is not required to make this intervalometer.** If you have access to a 3D printer, it's very possible to use the .SCAD files to generate .STLs of the files designated for cutting. Make sure that they are all set to 3.175mm thickness as the design requires 1/8" materials for assembly. A clever person could even improve the design to remove the need for bolts to attach the ``motor_mount_bottom`` and ``electronics_mount`` pieces when making a 3D printed version.
|
||||||
|
|
||||||
|
Another note: When cutting the base of the intervalometer, named the ``panel_laser`` there is a circular cut for a skateboard wheel bearing to be inserted. These are made with slightly different tolerances, so do some tests before you cut your final panel. When properly scaled, the bearing should fit snugly so that it can be glued to the panel. The positioning of the bearing is vital to the functionality, so it's best to test the bearing fit using the ``bearing_calibrate`` module and then edit the size of the bearing by changing the ``fuzz`` variable of the ``bearing_laser`` module. Export a new .DXF of the ``intval_panel_laser`` module by using the ``projection()`` function and cut that.
|
||||||
|
|
||||||
|
##### Materials
|
||||||
|
|
||||||
|
Early prototypes for the INTVAL 2.0 were made with 1/8" acrylic. I was very hopeful that I would be able to make a visually clear product where all of the electronics would be visible. Cool, right? This, unfortunately, was not to be. The forces applied to the prototypes during casual use would cause the acrylic to crack or shatter quite easily. I'm not saying it's not possible, but just that it is a less-than-ideal material for this project.
|
||||||
|
|
||||||
|
Here's what I would suggest, in order (all should be cut from 1/8" sheets):
|
||||||
|
|
||||||
|
1. Craft plywood - Cheap, flexible and effective. I cut this, add custom designs, stain and coat in polyurethane. Yet to have any issues with it.
|
||||||
|
2. Delrin (acetal homopolymer) - Too rich for my blood, but should perform better than acrylic. Will probably look pretty cool.
|
||||||
|
3. Acrylic - Good for prototyping, but may crack under pressure. Make parts to spare if you go down this path.
|
||||||
|
|
||||||
|
#### C. Hardware
|
||||||
|
|
||||||
|
I would like to further reduce the amount of non-fabricated parts required for this build in future revisions, but here we are. I've run a few spreadsheet models and have the cost-per-unit down to ~$50, but this fails to account for shipping, misprints and a whole host of associated costs, including build time. Needless to say, I don't see a profitable enterprise being build on the production of 16mm intervalometers, which is why I am creating this in the open for others to build and improve upon.
|
||||||
|
|
||||||
|
Links below are to Amazon for accessibility and [Adafruit](http://adafruit.com) where possible, but feel free source compatible or equivalent materials from companies that align to your personal ethics. Sourcing from AliExpress can bring the cost-per-unit down dramatically, if you are building these as part of a workshop or class.
|
||||||
|
|
||||||
|
The meat of this project are the L298N Dual H-Bridge and the Arduino Trinket 5V. The 3D models are designed for the 60RPM motor listed below, but the design can easily be adapted to other motors. I'm trying out other motors in a few different forks of this project.
|
||||||
|
|
||||||
All of the purchasable parts for this build:
|
All of the purchasable parts for this build:
|
||||||
|
|
||||||
1. [Arduino Trinket Pro 5V](http://www.amazon.com/gp/product/B0131VM9I0/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0131VM9I0&linkCode=as2&tag=sixteentools-20&linkId=PK57RTRI2YRJVT2E)
|
1. (1x) Arduino Trinket Pro 5V - [[Adafruit](https://www.adafruit.com/products/2000)] [[Amazon](http://www.amazon.com/gp/product/B0131VM9I0/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B0131VM9I0&linkCode=as2&tag=sixteentools-20&linkId=PK57RTRI2YRJVT2E)]
|
||||||
2. [Nextrox Mini 12V DC 60 RPM High Torque Gear Box Electric Motor](http://www.amazon.com/gp/product/B00BX54O8A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00BX54O8A&linkCode=as2&tag=sixteentools-20&linkId=DFU3L54JZ3KQJMPU)
|
2. (1x) Nextrox Mini 12V DC 60 RPM High Torque Gear Box Electric Motor - [[Amazon](http://www.amazon.com/gp/product/B00BX54O8A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00BX54O8A&linkCode=as2&tag=sixteentools-20&linkId=DFU3L54JZ3KQJMPU)]
|
||||||
3. [L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino](http://www.amazon.com/gp/product/B014KMHSW6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B014KMHSW6&linkCode=as2&tag=sixteentools-20&linkId=QZUX2HKYZAL23WGD)
|
3. (1x) L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino - [[Amazon](http://www.amazon.com/gp/product/B014KMHSW6/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B014KMHSW6&linkCode=as2&tag=sixteentools-20&linkId=QZUX2HKYZAL23WGD)]
|
||||||
4. [(5 Pcs) DC 3 Terminals PCB Mount 2.1x5.5mm Jacks Connectors Socket](http://www.amazon.com/gp/product/B00CQMGWIO/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00CQMGWIO&linkCode=as2&tag=sixteentools-20&linkId=KMF43HLB5IS2CIFO) - need 1
|
4. (1x) DC 3 Terminals PCB Mount 2.1x5.5mm Jacks Connectors Socket (5 Pcs) - [[Amazon](http://www.amazon.com/gp/product/B00CQMGWIO/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00CQMGWIO&linkCode=as2&tag=sixteentools-20&linkId=KMF43HLB5IS2CIFO)]
|
||||||
5. [(10 Pcs) Plastic PCB Mount 5-Pin Stereo 3.5mm Socket Audio Connector]() - need 1
|
5. (1x) Plastic PCB Mount 5-Pin Stereo 3.5mm Socket Audio Connector (10 Pcs) - [[Amazon]()]
|
||||||
6. [3.5mm Stereo Audio Cable](http://www.amazon.com/gp/product/B004G3UK5C/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004G3UK5C&linkCode=as2&tag=sixteentools-20&linkId=RVH32COHMFACT46V)
|
6. (.5x) 3.5mm Stereo Audio Cable - [[Amazon](http://www.amazon.com/gp/product/B004G3UK5C/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004G3UK5C&linkCode=as2&tag=sixteentools-20&linkId=RVH32COHMFACT46V)]
|
||||||
7. [(10 Pcs) Mini Push Button Momentary OFF-ON Switch 7mm Black](http://www.amazon.com/gp/product/B00RMGSCPA/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00RMGSCPA&linkCode=as2&tag=sixteentools-20&linkId=66EL3G5J4ZXONMNK) - need 4
|
7. (4x) Mini Push Button Momentary OFF-ON Switch 7mm Black (10 Pcs) - [[Amazon](http://www.amazon.com/gp/product/B00RMGSCPA/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00RMGSCPA&linkCode=as2&tag=sixteentools-20&linkId=66EL3G5J4ZXONMNK)]
|
||||||
|
8. (1x) Micro Switch w/ Roller Lever - [[Adafruit](https://www.adafruit.com/products/819)]
|
||||||
|
9. (1x) Skateboard bearings - [[Amazon](http://www.amazon.com/dp/B00GSKFW36/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=IEKSU26XDTXI&coliid=I319NCTYBQC35T)]
|
||||||
|
10. (4x) M3.5 - 0.6 x 20mm Screws
|
||||||
|
11. (3x) M2 - 0.6 x 15mm Bolts
|
||||||
|
12. (6x) M5 - 0.8 x 25mm Bolts
|
||||||
|
13. (4x) M5 - 0.8 Nuts
|
||||||
|
|
||||||
Additionally you'll need wire and solder of your choosing.
|
Additionally you'll need wire and solder of your choosing.
|
||||||
|
|
||||||
|
#### D. Assembly
|
||||||
|
|
||||||
|
Assembling the INTVAL 2.0 can be done in an hour or so, much quicker if practiced. As mentioned, the largest amount of time should be in fabricating the parts or acquiring electronics/parts. There are 2 things I don't like about this design that I'll be addressing in subsequent builds: complexity of the electronics and crowding inside the case.
|
||||||
|
|
||||||
|
##### Mounting the electronics
|
||||||
|
|
||||||
|
The L298N is attached to the panel via the three M2 bolts. The space cut in the panel where the fourth would go is to prevent the Bolex's handle from rubbing against the panel. At this point I usually flash the Arduino Trinket Pro with the latest firmware, as in the ["Programming"](#Programming) section, prior to soldering and mounting. It can be done after, though, and can be reprogrammed after it is built.
|
||||||
|
|
||||||
|
##### Mounting the motor's base and microswitch
|
||||||
|
|
||||||
|
Modify the microswitch as shown in the photos. At this point, I usually solder leads onto the two tabs as shown to save a cramped soldering job later. Insert the microswitch into the ``motor_mount_bottom`` and line the piece up with the 6 holes cut in the panel according to the pictures and rendering. It then gets attached to the panel with 4 of the M5 bolts and attached on the bottom with the corresponding M5 nuts.
|
||||||
|
|
||||||
|
##### Mounting the motor
|
||||||
|
|
||||||
|
The motor should fit snugly into the ``motor_mount`` piece and can be attached with 2 screws that usually accompany the motor (when bought from Amazon). At this point, I usually solder 2 leads onto the top of the motor and cap it so that the fragile tabs wont break off. I use red and black wires so that I can easily switch their position in the L298N if the intervalometer is functioning backwards.
|
||||||
|
|
||||||
|
##### Attach buttons
|
||||||
|
|
||||||
|
Three of the buttons are attached to the corresponding holes in the panel. When cutting them, I will add an etched-in label for each specifying (left to right) that they control ``direction``, ``speed``, and ``delay``.
|
||||||
|
|
||||||
|
##### Building the plunger
|
||||||
|
|
||||||
|
To trigger the intervalometer and to start/stop sequences, the INTVAL 2.0 uses a simple switch that I found is handily made from cheap audio parts. In a pinch, this switch can be hard-wired into the design, but for the safety of the electronics inside I decided on using a 3.5mm socket and 3.5mm cable with a simple momentary button closing the circuit. For this, I buy a 6' cable and cut it in two.
|
||||||
|
|
||||||
|
##### Attaching the bearing
|
||||||
|
|
||||||
|
##### Attaching the DC and 3.5mm sockets
|
||||||
|
|
||||||
|
#### E. Soldering
|
||||||
|
|
||||||
|
#### F. <a name="Programming"></a>Programming
|
||||||
Loading…
Reference in New Issue