diff --git a/scad/contact_printer.scad b/scad/contact_printer.scad
index 8a7cabd..c03c0f4 100644
--- a/scad/contact_printer.scad
+++ b/scad/contact_printer.scad
@@ -214,6 +214,13 @@ module debug () {
         rotate([0, 0, BearingRotateZ4]) color("blue") bearing([0, BearingY, BearingZ]);
     }
     
+    translate([ReelX,  ReelY, PanelOffsetZ+1-5]) {
+        rotate([0, 0, BearingRotateZ1]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
+        rotate([0, 0, BearingRotateZ2]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
+        rotate([0, 0, BearingRotateZ3]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
+        rotate([0, 0, BearingRotateZ4]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
+    }
+    
     centered_geared_motor([ReelX,  ReelY, TakeupMotorZ], [180, 0, PictureTakeupMotorRotationZ]);
     centered_geared_motor([ReelX, -ReelY, TakeupMotorZ], [180, 0, StockTakeupMotorRotationZ]); 
 
@@ -622,7 +629,7 @@ module takeup_panel_picture_motor_mount (pos = [0, 0, 0] ) {
                 }
                 takeup_panel_motor_mount_m4_bolts_voids([0, 0, -8.99]);
                 translate([0, 0, -29]) rotate([0, 0, PictureTakeupMotorRotationZ]){
-                    translate([5, 0, 0]) cube([50, 27, 10], center = true);
+                    translate([10, 0, 0]) cube([50, 27, 10], center = true);
                 }
             }
             takeup_mount_panel([0, 0, -26], [0, 0, PictureTakeupMotorRotationZ]);
@@ -688,7 +695,7 @@ module takeup_panel_stock_motor_mount (pos = [0, 0, 0] ) {
 
 module bearing_post_nut (pos = [0, 0, 0]) {
     translate(pos) difference() {
-        cylinder(r = R(11), h = 5, center = true, $fn = 70);
+        cylinder(r = R(10), h = 5, center = true, $fn = 70);
         cylinder(r = R(3.5), h = 5 + 1, center = true, $fn = 30);
         translate([0, 0, -2]) m3_nut(2);
         translate([0, 0, 3.25]) cylinder(r = R(BearingInnerDiameter) + 0.1, h = 5, center = true, $fn = 50);
@@ -714,7 +721,7 @@ module corner_foot (pos = [0, 0, 0], rot = [0, 0, 0]) {
     }
 }
 
-PART = "bearing_post_nut";
+PART = "takeup_panel_picture_motor_mount";
 LIBRARY = true;
 
 if (PART == "panel") {
@@ -744,24 +751,5 @@ if (PART == "panel") {
 } else if (PART == "bearing_post_nut"){
     bearing_post_nut();
 } else {
-    //debug();
-
-    PanelOffsetZ = -2.5;
-    takeup_panel_picture([TakeupPanelPictureX,  TakeupPanelPictureY, PanelOffsetZ]);
-    takeup_panel_picture_motor_mount([TakeupPanelPictureX,  TakeupPanelPictureY, PanelOffsetZ]);
-
-    //centered_geared_motor([ReelX,  ReelY, TakeupMotorZ], [180, 0, PictureTakeupMotorRotationZ]);
-
-    translate([ReelX,  ReelY, PanelOffsetZ+1]) {
-        rotate([0, 0, BearingRotateZ1]) color("blue") bearing([0, BearingY, BearingZ-.75], 7.25);
-        rotate([0, 0, BearingRotateZ2]) color("blue") bearing([0, BearingY, BearingZ-.75], 7.25);
-        rotate([0, 0, BearingRotateZ3]) color("blue") bearing([0, BearingY, BearingZ-.75], 7.25);
-        rotate([0, 0, BearingRotateZ4]) color("blue") bearing([0, BearingY, BearingZ-.75], 7.25);
-    }
-    translate([ReelX,  ReelY, PanelOffsetZ+1-5]) {
-        rotate([0, 0, BearingRotateZ1]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
-        rotate([0, 0, BearingRotateZ2]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
-        rotate([0, 0, BearingRotateZ3]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
-        rotate([0, 0, BearingRotateZ4]) color("red") bearing_post_nut([0, BearingY, BearingZ-.75]);
-    }
+    debug();
 }