Update rendered STLs

models.txt

@@ -3,6 +3,7 @@ bearing_post_nut
 corner_foot
 daylight_spool_insert_reinforced
 daylight_spool_insert_reinforced_nut
+electronics_panel
 feed_panel_motor_mount
 feed_panel_picture
 feed_panel_stock
@@ -22,6 +23,7 @@ slip_coupling
 sound_gate
 sprocketed_roller
 sprocketed_roller_invert
+sprocketed_roller_invert_solid
 sprocketed_roller_solid
 sprocketed_wheel
 super_gate

scad/contact_printer.scad

@@ -7,6 +7,15 @@ include <./common/2020_tslot.scad>;
 include <./takeup/takeup.scad>;
 include <./sprocketed_roller/sprocketed_roller_var.scad>;
 
+
+//120m = 400, 30m = 300
+FrameX = 400;
+
+//120m = 260, 30m = 175
+FrameY = 260;
+
+FrameZ = -16;
+
 IN = 25.4;
 
 Film16mmStandard = 10.26;
@@ -18,10 +27,6 @@ Film16mmSuperZ = -(16 - Film16mmSuper) + 0.7;
 Film16mmSound = Film16mmSuper - Film16mmStandard;
 Film16mmSoundZ = -7.75;
 
-FrameX = 400;
-FrameY = 260;
-FrameZ = -16;
-
 Sprockets = 18;
 SprocketedRollerBevel = true;
 SprocketedRollerModel = "gearbox_motor";
@@ -52,17 +57,17 @@ TakeupPanelX = 152;
 TakeupPanelY = 100;
 
 //Offsets the takeup panels by x,y
-TakeupPanelPictureX = 127.5 + 6.25;
+TakeupPanelPictureX = 133.75;
-TakeupPanelPictureY = 90 + 10;
+TakeupPanelPictureY = 100;
 
-TakeupPanelStockX = 127.5 + 6.25;
+TakeupPanelStockX = 133.75;
-TakeupPanelStockY = -90 - 10;
+TakeupPanelStockY = -100;
 
-FeedPanelPictureX = -127.5 - 6.25;
+FeedPanelPictureX = -133.75;
-FeedPanelPictureY = 90 + 10;
+FeedPanelPictureY = 100;
 
-FeedPanelStockX = -127.5 - 6.25;
+FeedPanelStockX = -133.75;
-FeedPanelStockY = -90 - 10;
+FeedPanelStockY = -100;
 
 TakeupPanelPictureOffsetX = ReelX - TakeupPanelPictureX;
 TakeupPanelStockOffsetX = ReelX - TakeupPanelStockX;
@@ -79,7 +84,6 @@ FeedPanelStockOffsetY = -ReelY - FeedPanelStockY;
 TakeupPanelBoltsOffsetX = -17.5;
 FeedPanelBoltsOffsetX = 17.5;
 
-
 TakeupCenterVoidD = 47;
 TakeupCenterColumnD = 55;
 TakeupCenterColumnZ = 23.25;