diff --git a/hardware/contact_printer_prints.csv b/hardware/contact_printer_prints.csv
new file mode 100644
index 0000000..541da4f
--- /dev/null
+++ b/hardware/contact_printer_prints.csv
@@ -0,0 +1,4 @@
+module,quantity,stl
+sprocketed roller invert solid,1,./stl/contact_printer_sprocketed_roller_invert_solid.stl
+picture gate,1,./stl/contact_printer_picture_gate.stl
+gate carrier,1,./stl/contact_printer_gate_carrier.stl
diff --git a/scad/contact_printer.scad b/scad/contact_printer.scad
index e4e4a19..a6ccf55 100644
--- a/scad/contact_printer.scad
+++ b/scad/contact_printer.scad
@@ -434,7 +434,6 @@ module gate_blank_void (pos = [0, 0, 0], rot = [0, 0, 0], bottom = [1, 1], top =
     }
 }
 
-
 module gate_blank () {
     X = 15;
     Z = 20;
@@ -480,9 +479,10 @@ module gate_blank () {
         translate([(X / 2) + SidesX, SidesY, 0]) rotate([0, 0, 45]) cube([5, 5, Z + 1], center = true);
         translate([(-X / 2) - SidesX, SidesY, 0]) rotate([0, 0, 45]) cube([5, 5, Z + 1], center = true);
     }
-
 }
 
+
+//PRINT: 1
 module gate_carrier (pos = [0, 0, 0], rot = [0, 0, 0]) {
     X = 15.4;
     SidesX = 2;
@@ -583,6 +583,7 @@ module picture_gate_text (pos = [0, 1.5, 9.3], label = "gate" ){
 }
 
 //standard, super, full, sound
+//PRINT: 1
 module picture_gate (pos = [0, 0, 0], rot = [0, 0, 0], Type = "full", Width = 2) {
     X = LampGateX;
     translate(pos) rotate(rot) {
@@ -647,6 +648,7 @@ module lamp_dual (pos = [0, 0, 0]) {
     }
 }*/
 
+//PRINT: 1
 module lamp_single (pos = [0, 0, 0]) {
     Height = 20 + 5;
     BaseZ = 2;
@@ -742,6 +744,7 @@ module lamp_single_assembly (pos = [0, 0, 0]) {
     }
 }
 
+//PRINT: 1
 module lamp_cover (pos = [0, 0, 0]) {
     RollerVoidY = -17.5;
     RollerShelfD = 44.75;
@@ -783,6 +786,7 @@ module panel_bearing_void (pos = [0, 0, 0]) {
 //BOM: 6, M3 sliding t slot nut,N/A,Attach aluminum extrusions to panel
 //BOM: 1, 100RPM DC geared motor with encoder,N/A,Drive the sprocketed_roller
 //BOM: 4, M4 hex bolt 40mm, N/A, Attach the lamp to the panel
+//PRINT: 1
 module panel (pos = [0, 0, 0]) {
     BoltX = (PanelX - 20) / 2;
     BoltY2 = (PanelY) / 2;
diff --git a/scripts/prints.sh b/scripts/prints.sh
new file mode 100644
index 0000000..4cf9849
--- /dev/null
+++ b/scripts/prints.sh
@@ -0,0 +1,43 @@
+#!/bin/bash
+
+if [[ "${1}" == "" ]]; then
+	echo "Please use a .scad file as first argument"
+	exit 1
+fi
+
+FILENAME=$(basename "${1}" | tr '[:upper:]' '[:lower:]')
+EXTENSION="${FILENAME##*.}"
+
+if [[ "${EXTENSION}" != "scad" ]]; then
+	echo "Please use a .scad file as first argument, not .${EXTENSION}"
+	exit 2
+fi
+
+if [[ ! -f "${1}" ]]; then
+	echo "File ${1} does not exist"
+	exit 3
+fi
+
+mkdir -p hardware
+
+NAME="${FILENAME%.*}"
+DESTINATION="./hardware/${NAME}_prints.csv"
+
+echo "module,quantity,stl" > "${DESTINATION}"
+
+tac "${1}" | while read line; do
+    module=$(echo "${line}" | grep 'module ' | grep '(' | grep ')')
+    if [[ "${module}" != "" ]]; then
+    	MODULE=$(echo "${module}" | xargs | awk '{print $2}' | awk -F'{' '{print $1}')
+    fi
+    qty=$(echo "${line}" | grep ^'//' | grep 'PRINT' | awk -F'PRINT:' '{print $2}'| xargs)
+    if [[ "${qty}" != "" ]]; then
+    	QUANTITY="${qty}"
+    	echo "[${MODULE//_/ }] ${QUANTITY}x"
+    	echo "${MODULE//_/ },${QUANTITY},stl/${NAME}_${MODULE}.stl" >> "${DESTINATION}"
+    fi
+done
+
+sqlite3 :memory: -cmd '.mode csv' -cmd ".import ${DESTINATION} prints" -cmd '.mode markdown' \
+  "SELECT module as 'Part', quantity as 'Print Count', printf( '[%s](%s)', 'STL' , prints.stl ) as 'Download'
+  FROM prints;"
\ No newline at end of file
diff --git a/scripts/scad.sh b/scripts/scad.sh
index d8e1d85..cb431aa 100644
--- a/scripts/scad.sh
+++ b/scripts/scad.sh
@@ -17,5 +17,6 @@ while read m; do
 done < models.txt
 
 bash scripts/bom.sh "./scad/contact_printer.scad"
+bash scripts/prints.sh "./scad/contact_printer.scad"
 
 #run client tests?