16mm
/
contact_printer
1
0
Fork 0
Code Issues 5 Pull Requests Projects Releases Wiki Activity

Move back idle rollers to put film over sprocketed roller longer

This commit is contained in:
Matt McWilliams 2023-05-22 13:24:21 -04:00
parent 0e1099d29f
commit 09e3aadb2f
1 changed files with 15 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
scad/contact_printer.scad
View File

@ -85,9 +85,9 @@ LampWireY = 20;
LampGateX = 11;
IdleRollerPrintX = 55;
IdleRollerPrintY = 5;
IdleRollerNegativeX = 35;
IdleRollerNegativeY = -10;
IdleRollerPrintY = 0;
IdleRollerStockX = 35;
IdleRollerStockY = -16;
IdleRollerBoltH = 30;
@ -168,10 +168,11 @@ module debug () {
panel([0, 0, PanelOffsetZ]);
UseDaylight = true;
/*translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () {
translate([0, RollerY, 18]) rotate([180, 0, 0]) difference () {
sprocketed_roller(sprockets = Sprockets, bevel = SprocketedRollerBevel, model = SprocketedRollerModel, set_screw_top = SprocketedRollerSetScrewTop, set_screw_side = SprocketedRollerSetScrewSide, bolts = SprocketedRollerBolts, adjust_base = SprocketedRollerAdjustBase);
//translate([50, 0, 0]) cube([100, 100, 100], center = true);
}*/
}
//centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
//lamp
//difference () {
//lamp_dual([0, LampY, 0 + 1]);
@ -186,10 +187,13 @@ module debug () {
//idle rollers
idle_roller([ IdleRollerPrintX, IdleRollerPrintY, 3]);
idle_roller([-IdleRollerPrintX, IdleRollerPrintY, 3]);
idle_roller([ IdleRollerNegativeX, IdleRollerNegativeY, 3]);
idle_roller([-IdleRollerNegativeX, IdleRollerNegativeY, 3]);
//active roller
//centered_geared_motor([0, RollerY, MotorZ], [180, 0, 90]);
idle_roller([ IdleRollerStockX, IdleRollerStockY, 3]);
idle_roller([-IdleRollerStockX, IdleRollerStockY, 3]);
//idle roller path
translate([0, IdleRollerPrintY - 8, 10]) cube([200, .1, 16], center = true);
translate([0, IdleRollerStockY + 8, 10]) cube([200, .1, 16], center = true);
if (UseDaylight) {
//feed
@ -569,8 +573,8 @@ module panel (pos = [0, 0, 0]) {
//idle roller posts
idle_roller_bolt_void([ IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
idle_roller_bolt_void([-IdleRollerPrintX, IdleRollerPrintY, IdleRollerBoltsZ]);
idle_roller_bolt_void([ IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
idle_roller_bolt_void([-IdleRollerNegativeX, IdleRollerNegativeY, IdleRollerBoltsZ]);
idle_roller_bolt_void([ IdleRollerStockX, IdleRollerStockY, IdleRollerBoltsZ]);
idle_roller_bolt_void([-IdleRollerStockX, IdleRollerStockY, IdleRollerBoltsZ]);
//lamp
lamp_bolts_voids([0, LampY + 15, LampBoltsZ]);