//V3 include <../libraries/gnal_v3.scad>; SPOKE_COUNT = 24; module gnal_50ft_spiral (spiral_count = 40, od = 215.75, quarter = false) { outer_d = 215; outer_d_inside = 209; outer_h = 7.5; spoke_len = 81; spoke_w = 3; spoke_h = 4.2 + 3; spoke_2_len = 43; translate([0, 0, -3.6]) difference () { cylinder(r = outer_d / 2, h = spoke_h, center = true, $fn = 500); cylinder(r = outer_d_inside / 2, h = outer_h + 1, center = true, $fn = 500); } difference () { gnal_spiral_core(); //rounded spoke voids for (i = [0 : SPOKE_COUNT]) { rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) { translate([0, 26.75, 0]) { cylinder(r = 2, h = 20, center = true, $fn = 40); } } } } //main spokes for (i = [0 : SPOKE_COUNT]) { rotate([0, 0, i * (360 / SPOKE_COUNT)]) { translate([(spoke_len / 2) + (48 / 2), 0, -3.6]) { if (quarter && i % 3 == 0 && i % 6 != 0) { //phew! cube([spoke_len, spoke_w * 2, spoke_h], center = true); } else { cube([spoke_len, spoke_w, spoke_h], center = true); } } } } //secondary spokes for (i = [0 : SPOKE_COUNT]) { rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) { translate([(outer_d / 2) - (spoke_2_len / 2) - 2, 0, -3.6]) { cube([spoke_2_len, spoke_w, spoke_h], center = true); } } } //spoke cross bars for (i = [0 : SPOKE_COUNT]) { rotate([0, 0, (i + 0.5) * (360 / SPOKE_COUNT)]) { translate([63, 0, -3.6]) { rotate([0, 0, 20]) { cube([ spoke_w, 18, spoke_h], center = true); } } } } translate([0, 0, -.1]) { rotate([0, 0, -90]) { film_guide(spiral_count); } } } module gnal_50ft_spiral_quarter (quarter = "a") { LEN = 220; module notch (NOTCH = 5) { cube([NOTCH, NOTCH, 5], center = true); translate([0, 0, (5 / 2) + (1 / 2)]) rotate([0, 0, 45]) cylinder(r1 = NOTCH / 1.4, r2 = 0.1, h = 1, center = true, $fn = 4); } module quarter () { NOTCH = 3; NOTCH_H = -5; NOTCHES = 7; OFFSET = 60; difference () { cube([LEN, LEN, LEN], center = true); for (i = [0 : NOTCHES - 1]) { translate([OFFSET - (i * (LEN / NOTCHES)), -(LEN / 2), NOTCH_H]) rotate([0, 0, 45]) notch(NOTCH); } } for (i = [0 : NOTCHES - 2]) { translate([-(LEN / 2), OFFSET - (i * (LEN / NOTCHES)), NOTCH_H]) rotate([0, 0, 45]) notch(NOTCH); } } intersection () { rotate([0, 0, 45]) gnal_50ft_spiral(quarter = true); if (quarter == "a") { rotate([0, 0, 0]) translate([LEN / 2, LEN / 2, 0]) quarter(); } else if (quarter == "b") { rotate([0, 0, 90]) translate([LEN / 2, LEN / 2, 0]) quarter(); } else if (quarter == "c") { rotate([0, 0, 180]) translate([LEN / 2, LEN / 2, 0]) quarter(); } else if (quarter == "d") { rotate([0, 0, 270]) translate([LEN / 2, LEN / 2, 0]) quarter(); } } } module gnal_50ft_top () { H = 5; center_d = 53; spoke_w = 4.5; spokes = 12; outer_d = 215; inner_d = 150; void_d = 22.5; hole_d = 3.5; hole_spacing = 37; core_d = 29.5; core_bottom_d = 26.2; difference () { union () { cylinder(r = center_d / 2, h = H, center = true, $fn = 100); for (i = [0 : spokes - 1]) { rotate([0, 0, i * (360 / spokes)]) translate([0, outer_d / 4, 0]) cube([spoke_w, (outer_d / 2) - 1, H], center = true); } } //void cylinder(r = void_d / 2, h = H + 1, center = true, $fn = 100); //speed holes for (i = [0 : 3]) { rotate([0, 0, (i * 90) + 45]) translate([0, hole_spacing / 2, 0]) cylinder(r = hole_d / 2, h = H + 1, center = true); } //rounding of center cylinder for (i = [0 : spokes - 1]) { rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([-2.75, 26.5, 0]) cylinder(r = 2, h = H+1, center = true, $fn = 40); rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([2.75, 26.5, 0]) cylinder(r = 2, h = H+1, center = true, $fn = 40); rotate([0, 0, (i + 0.5) * (360 / spokes)]) translate([0, 26.5, 0]) cube([5, 4, H + 1], center = true); } } difference () { cylinder(r = (center_d / 2) - 1.8, h = H, center = true, $fn = 200); cylinder(r = (hole_spacing / 2) + 2, h = H + 1, center = true, $fn = 200); } //outer ring difference () { cylinder(r = outer_d / 2, h = H, center = true, $fn = 200); cylinder(r = (outer_d / 2) - 5, h = H + 1, center = true, $fn = 200); } //inner ring difference () { cylinder(r = inner_d / 2, h = H, center = true, $fn = 200); cylinder(r = (inner_d / 2) - 5, h = H + 1, center = true, $fn = 200); } //rounded cross connectors for (i = [0 : spokes - 1]) { rotate([0, 0, i * (360 / spokes)]) translate([0, (inner_d / 2) - (spoke_w / 2), 0]) difference() { cylinder(r = 6.5, h = H, center = true); translate([6.25, 6, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60); translate([-6.25, 6, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60); translate([-6.1, -7, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60); translate([6.1, -7, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60); } } difference () { union () { translate([0, 0, 3.75 + 1]) cylinder(r = core_d / 2, h = H, center = true, $fn = 60); translate([0, 0, 3.75 + 1 + 3.2]) cylinder(r = core_bottom_d / 2, h = H, center = true, $fn = 60); } cylinder(r = void_d / 2, h = H * 5 , center = true, $fn = 100); translate([0, 0, 4 + 1 + 2.25]) spacer_ridges(); } //rounded outer ring connectors for (i = [0 : spokes - 1]) { rotate([0, 0, i * (360 / spokes)]) translate([0, 205 / 2, 0]) difference () { cube([13, 9, H], center = true); translate([6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60); translate([-6.2, -4.2, 0]) cylinder(r = 4, h = H + 1, center = true, $fn = 60); } } } FN = 200; $fn = FN; module film_guide (rotations = 40, id = 45.55 - .5, spacing = 2.075, bottom = -2) { spiral(rotations, id, spacing, bottom, $fn); } module gnal_stacking_spindle () { IN_LEN = 21; LEN = 17.1; ALT_LEN = 27.1; difference () { union () { gnal_spindle_base(); translate([0, 0, -23.75]) gnal_spacer_solid(); } //inner screw negative translate([0, 0, -30]) union() { if (DEBUG) { cylinder(r = OD / 2, h = IN_LEN); } else { metric_thread (diameter=OD, pitch=PITCH, thread_size = THREAD, length = IN_LEN); } translate([0, 0, 0.2]) { if (DEBUG) { cylinder(r = OD / 2, h = IN_LEN); } else { metric_thread (diameter=OD, pitch=PITCH, thread_size = THREAD, length = IN_LEN); } } } } difference () { outer_screw(LEN - 2); } } module stacking () { translate([0, 0, 72 + 72 + 36]) { color("blue") gnal_spindle_top(); } translate([0, 0, 72 + 72]) rotate([0, 180, 0]) intersection () { gnal_50ft_top(); cylinder(r = 50 / 2, h = 50, center = true); } translate([0, 0, 72 + 30]) { color("blue") rotate([0, 180, 0]) gnal_spindle_bottom(); } translate([0, 0, 72 + 36]) difference () { cylinder(r = 50 / 2, h = 16, center = true); cylinder(r = 22.5 / 2, h = 16 + 1, center = true); } translate([0, 0, 36 + 30]) { color("green") rotate([0, 180, 0]) gnal_stacking_spindle(); } translate([0, 0, 72]) difference () { cylinder(r = 50 / 2, h = 16, center = true); cylinder(r = 22.5 / 2, h = 16 + 1, center = true); } translate([0, 0, 30]) { color("green") rotate([0, 180, 0]) gnal_stacking_spindle(); } translate([0, 0, 36]) difference () { cylinder(r = 50 / 2, h = 16, center = true); cylinder(r = 22.5 / 2, h = 16 + 1, center = true); } color("blue") translate([0, 0, 12 + 3]) gnal_spacer_16(); //#1 - bottom spiral difference () { cylinder(r = 50 / 2, h = 16, center = true); cylinder(r = 22.5 / 2, h = 16 + 1, center = true); translate([0, 0, -8]) spiral_insert_void(); } color("blue") translate([0, 0, -12]) gnal_spiral_bottom_insert_16(); } PART="stacking"; if (PART == "spiral") { gnal_50ft_spiral(); } else if (PART == "tank") { gnal_50ft_tank(); } else if (PART == "quarter_a") { gnal_50ft_spiral_quarter("a"); } else if (PART == "quarter_b") { gnal_50ft_spiral_quarter("b"); } else if (PART == "quarter_c") { gnal_50ft_spiral_quarter("c"); } else if (PART == "quarter_d") { gnal_50ft_spiral_quarter("d"); } else if (PART == "top") { gnal_50ft_top(); } else if (PART == "insert_s8") { gnal_spiral_bottom_insert_s8(); } else if (PART == "insert_16") { gnal_spiral_bottom_insert_16(); } else if (PART == "insert_single") { gnal_spiral_bottom_insert_single(); } else if (PART == "spacer_16") { gnal_spacer_16(); } else if (PART == "spindle_top") { gnal_spindle_top(); } else if (PART == "spindle_bottom") { gnal_spindle_bottom(); } else if (PART == "spindle_single") { gnal_spindle_top(); } else if (PART == "stacking") { //stacking(); rotate([0, 180, 0]) gnal_stacking_spindle(); } else if (PART == "spiral_test") { difference () { gnal_50ft_spiral(); translate([125, 0, 0]) cube([250, 250, 100], center = true); rotate([0, 0, 30]) translate([-125, 0, 0]) cube([250, 250, 100], center = true); } } if (DEBUG) { echo("WARNING: DEBUG is enabled"); } echo($vpt); echo($vpr); echo($vpd);